Fine-earth translocation by tillage in stony soils in the Guadalentin, south-east Spain: an investigation using caesium-134

Tillage erosion is increasingly recognised as an important soil erosion process on agricultural land. In view of its potential significance, there is a clear need to broaden the experimental database for the magnitude of tillage erosion to include a range of tillage implements and agricultural environments. The study discussed in this paper sought to address the need for such data by examining tillage erosion by a duckfoot chisel plough in stony soils on steep slopes in a semi-arid environment. Results of the investigation of coarse fraction (rock fragment) translocation by tillage in this environment have been presented elsewhere and the paper focuses on tillage translocation and erosion of the fine earth. Tillage translocation was measured at 10 sites, representing both upslope and downslope tillage by a duckfoot chisel plough on five different slopes, with tangents ranging from 0.02 to 0.41. A fine-earth tracer, comprising fine earth labelled with ¹³⁴Cs, was introduced into the plough layer before tillage. After a single pass of the plough, incremental samples of plough soil were excavated and sieved to separate the fine earth from the rock fragments. Translocation of the fine-earth tracer was established by analysing the ¹³⁴Cs content of the samples of fine earth. These data were used to establish translocation distances for each combination of slope and tillage direction. Translocation distances of the fine earth were not significantly different from translocation distances of the coarse fraction. For all sites, except uphill on the 0.41 slope, translocation distances were found to be linearly related to slope tangent. The soil flux due to tillage for each site was calculated using the translocation distance and the mass per unit area of the plough layer. For slopes with tangents <0.25, the relationship between soil flux and tangent was linear and the soil flux coefficient derived was 520–660 kg m⁻¹ per pass. This is much larger than the coefficients found in other studies and this high magnitude is attributed to the non-cohesive nature and high rock fragment content of the soil in this investigation. A second contrast with previous studies was found in non-linearity in the relationship between soil flux and tangent when steeper slopes were included. This was a product of variation in plough depth between the steepest slopes and the remainder of the study area. On the basis of the study it is suggested that an improved understanding of tillage erosion may be obtained by considering the dual processes of tillage detachment (mass per unit area of soil subject to tillage) and tillage displacement (equivalent to translocation distance per pass) in assessing, comparing and modelling tillage translocation. An improved model is proposed that recognises the complexity of soil redistribution by tillage, provides a framework for process-based investigation of the controls on tillage fluxes, and allows identification of potential self-limiting conditions for tillage erosion.     

Tillage erosion within potato production systems in Atlantic Canada: I. Measurement of tillage translocation by implements used in seedbed preparation

In Canada, there is growing acceptance that tillage erosion is a serious form of soil degradation and a threat to the sustainability of agriculture across the country. To date, the potential risk for tillage erosion within potato production systems has not been investigated. The objective of this study was to generate tillage translocation values for primary and secondary tillage implements common to seedbed preparation within conventionally and conservation tilled potato production systems in Atlantic Canada. Tillage translocation was measured for each implement by labelling a plot of soil with a tracer. The tracer redistribution along the path of tillage was used to generate a summation curve to calculate mean soil movement in the direction of tillage. The results show that each primary and secondary tillage operation moved vast quantities of soil and is potentially erosive. Maximum displacement distances were considerably larger in this project than those reported in previous studies looking at tillage erosion by primary and/or secondary tillage implements. All four tillage implements tested moved soil at least 3 m, with the greatest translocated distances (5.6 m) observed for the chisel plough (CP) and vibrashank (VS). The mass of translocated soil (T_M) was greatest for the CP, followed by the mouldboard plough (MP), VS and offset disc (OD). In addition, compared to travelling downslope, the upslope speed of tillage was reduced by 38%, 21%, 32% and 12% for the MP, CP, OD and VS, respectively, while the depth of tillage was reduced by 6%, 5%, 35% and 2%, respectively. It is apparent that conservation tillage implements (the CP is generally promoted to reduce water erosion in Atlantic Canada) and secondary tillage implements (OD and VS) can move as much soil as conventional tillage implements such as the mouldboard plough, and must be considered when developing plans to reduce soil erosion within potato fields in Atlantic Canada.     

Measurement and modelling of the effects of initial soil conditions and slope gradient on soil translocation by tillage

Tillage erosion studies have mainly focused on the effect of topography and cultivation practices on soil translocation during tillage. However, the possible effect of initial soil conditions on soil displacement and soil erosion during tillage have not been considered. This study aims at investigating the effect of the initial soil conditions on net soil displacement and the associated erosion rates by a given tillage operation of a stony loam soil. Tillage erosion experiments were carried out with a mouldboard plough on a freshly ploughed (pre-tilled) soil and a soil under grass fallow in the Alentejo region (Southern Portugal).

The experimental results show that both the downslope displacement of soil material and the rate of increase of the downslope displacement with slope gradient are greater when the soil is initially in a loose condition. This was attributed to: (i) a greater tillage depth on the pre-tilled soil and (ii) a reduced internal cohesion of the pre-tilled soil, allowing clods to roll and/or slide down the plough furrow after being overturned by the mouldboard plough.

An analysis of additional available data on soil translocation by mouldboard tillage showed that downslope displacement distances were only significantly related to the slope gradient when tillage is carried out in the downslope direction. When tillage is carried out in the upslope direction, the effect of slope gradient on upslope displacement distances was not significant. This has important implications for the estimation of the tillage transport coefficient, which is a measure for the intensity of tillage erosion, from experimental data. For our experiments, estimated values of the tillage transport coefficient were 70 and 254 kg m⁻¹ per tillage operation for grass fallow and pre-tilled conditions, respectively, corresponding to local maximum erosion rates of ca. 8 and 35 Mg ha⁻¹ per tillage operation and local maximum deposition rates of ca. 33 and 109 Mg ha⁻¹ per tillage operation.     

Assessment of tillage erosion by mouldboard plough in Tuscany (Italy)

This study was designed to characterise the soil translocation effect induced by mouldboard ploughing with an implement traditionally used in the Tuscany region (Central Italy). We discuss the results of a set of field experiments performed to measure soil displacement along slopes of varying gradient in different directions and at several depths of tillage. Using the Soil Erosion by Tillage (SETi) model, soil translocation patterns for different tillage scenarios were analysed, with special attention paid to the effects of the direction and depth of tillage on the extent and spatial pattern of soil movement. The lateral slope gradient S_P and tillage depth D were found to be the dominant controlling factors for total soil displacement. The effect of the slope gradient in a direction parallel to tillage S_T was much less pronounced. These findings reveal the importance of the asymmetric nature of the soil movement produced by mouldboard ploughing and the predominant effect of the lateral displacement d_P on the actual trajectory of soil motion. Results demonstrate that spatial patterns of soil redistribution due to mouldboard ploughing are highly variable and depend on the particular characteristics of the implement used. This dependence is so strong that maximum downslope soil translocation can occur during both, contour tillage or up–down tillage. For this particular mouldboard plough, maximum downslope soil transport took place at a tillage direction ca. 70° and not when tillage was conducted along the steepest slope direction (0°). These findings highlight the potential of the combined approach applied. The physically based SETi model can be properly calibrated using a relatively limited dataset from field experiments. Once calibrating, the SETi model can then be used to generate synthetic tillage translocation relationships, which can predict the intensity and spatial pattern of soil translocation over a much wider range of tillage scenarios than the particular experimental conditions, in terms of topography complexity (slope gradients and morphology) and the direction and depth of tillage. These synthetic relationships are useful tools for evaluating strategies designed to reduce tillage erosion.     

东北黑土区典型坡面耕作侵蚀定量分析

东北黑土区水土流失主要集中在坡耕地,以往研究多关注水蚀而忽略了耕作侵蚀的存在。为印证并定量描述黑土耕作侵蚀,该文采用物理示踪法,测定了典型坡耕地耕作位移量及其分布格局。结果表明:铧式犁耕作后示踪剂沿耕作方向发生扩散,上坡耕作示踪剂集中分布在0~20 cm范围,而下坡耕作示踪剂集中分布在0~20和50~150 cm。一次耕作引起的耕作位移量为32.68~134.14 kg/m,耕作迁移系数234 kg/m。坡度是影响耕作位移的重要因素,二者呈显著的正相关关系,且对上坡耕作的影响大于下坡耕作。研究区耕作年侵蚀速率0.4~11.0 Mg/(hm2·a),凸起的坡背、坡肩处及坡度较大的位置侵蚀严重。虽然黑土区坡度较小,但由于耕作深度大,速度快,耕作侵蚀严重,应引起足够重视。     

Modelling tillage erosion in the topographically complex landscapes of southwestern Ontario, Canada

A tillage erosion model was developed for southwestern Ontario based on the relationship between tillage translocation and slope gradient and slope curvature. Two studies of tillage translocation and tillage erosion were used to calibrate this model, one a comparison of upslope and downslope tillage translocation on shoulder slopes, the other an examination of tillage translocation throughout topographically complex landscapes. Two field sites were used for validation of the model. For both sites, past tillage practices were known and past soil erosion was determined using ¹³⁷Cs as an indicator of soil redistribution. The model accurately predicted the pattern of soil redistribution that had occurred within the two field sites. Severe soil loss was observed and predicted on convex landscape positions and soil accumulation was observed and predicted on concave landscape positions. The model accounted for almost all of the soil lost from the convex upper slope positions where tillage erosion was expected to be the dominant erosion process. There was considerable soil loss and accumulation elsewhere in the landscapes which could not be accounted for by the model and was presumed to be primarily the result of water erosion. It was concluded that tillage erosion must be incorporated into soil erosion modelling for the purposes of soil conservation.     

Influences of tillage operations on soil translocation over sloping land by hoeing tillage

Very few studies have investigated the factors affecting soil displacement and tillage erosion by hoeing tillage. This study adopted a magnetic tracer method to investigate the influences of hoe form and tillage depth on soil translocation over steep hillslopes in Southwest China using a new type of magnetic tracer, i.e., ilmenite powder. Ilmenite powder enhanced the magnetic sensitivity of soil at the end position of tracer distribution, and improved the accuracy and efficiency of tillage translocation measurements. Tillage translocation by wide and perforated hoes was found to be significantly correlated with slope gradient (P < 0.01), however, no significant correlation was found for narrow and bidentate hoe tillage (P > 0.05). Compared with wide hoes, the tillage erosion rates resulting from the use of narrow, perforated and bidentate hoes were reduced by 12.4%, 11.0%, and 16.3%, respectively, indicating that changes in hoe forms resulted in a marked decrease in downslope soil translocation and tillage erosion. Tillage erosion rate decreased by 64% when the tillage depth was reduced from 0.26 to 0.14 m. These results suggest that innovations in hoe form and reductions in tillage depth are important means to manage tillage erosion due to hoeing.     

Quantifying tillage translocation and deposition rates due to moldboard plowing in the Palouse region of the Pacific Northwest, USA

Most of the erosion research in the Palouse region of eastern Washington State, USA has focused on quantifying the rates and patterns of water erosion for purposes of conservation planing. Tillage translocation, however, has largely been overlooked as a significant geomorphic process on Palouse hillslopes. Tillage translocation and tillage deposition together have resulted in severe soil degradation in many steep croplands of the Palouse region. Few controlled experiments have heretofore been conducted to model these important geomorphic processes on Palouse hillslopes. The overarching purpose of this investigation, therefore, was to model tillage translocation and deposition due to moldboard plowing in the Palouse region. Soil movement by moldboard plowing was measured using 480-steel flat washers. Washers were buried in silt loam soils on convex–convex shoulder, linear-convex backslope, and linear-concave footslope landform components, and then displaced from their original burial locations by a moldboard plow pulled by a wheel tractor traveling parallel to the contour at ca. 1.0 m s⁻¹. Displaced washers were located using a metal detector, and the distance and azimuth of the resultant displacement of each washer from its original burial location was measured using compass and tape. Resultant displacement distances were then resolved into their component vectors of displacement parallel and perpendicular to the contour. A linear regression equation was developed expressing mean soil displacement distance as a function of slope gradient. Tillage translocation and deposition were modeled as diffusion-type geomorphic processes, and their rates were described in terms of the diffusion constant (k). A multivariate statistical model was developed expressing mean soil displacement distance as a function of gravimetric moisture content, soil bulk density, slope gradient, and direction of furrow slice displacement. Analysis of variance (ANOVA) revealed a weak correlation between soil displacement and both bulk density and moisture content. Soil displacement was, however, significantly correlated with direction of furrow slice displacement. Tillage translocation rates were expressed in terms of the diffusion constant (k) and ranged from 105 to 113 kg m⁻¹ per tillage operation. Tillage deposition rates ranged from 54 to 148 kg m⁻¹ per tillage operation. With respect to tillage deposition, the diffusion constant calculated from volumetric measurements of tillage deposits equals ca. 150 kg/m. The rates of tillage translocation and deposition are not completely in balance; however, these rates do suggest that soil tillage is a significant geomorphic process on Palouse hillslopes and could account for the some of the variations in soil physical properties and crop yield potential at the hillslope and farm-field scale in the Palouse region.     

The long-term effect of tillage on soil displacement of hilly areas used for growing wheat in Greece

Abstract. Tillage displaces large amounts of soil from upper slopes and deposits soil in lower landscape positions, greatly affecting productivity in these areas. The long-term effect of tillage on soil erosion was studied in four field sites growing mainly rainfed wheat. The soil loss from landscape positions with slopes, ranging from 3 to 28%, was estimated by: (a) comparing data of horizon thickness described at the same position at different times; and (b) using soil movement tracers added to the soil. Existing empirical relationships were used for estimating soil loss by tillage and runoff water, and loss in wheat biomass production. The experimental data showed soil losses of 0.4 to 1.4 cm yr^–1 depending on slope gradient, plough depth, and tillage direction. In two of the sites, soil depth has been reduced by 24–30 cm in a period of 63 years. The mean soil displacement of the plough layer (30 cm thick), measured by soil movement tracers, ranged from 31 to 95 cm yr^–1 depending mainly on slope gradient, corresponding to a rate of soil loss of 0.3 cm to 1.4 cm yr^–1. Soil eroded from the upper slopes was deposited on the lower slopes increasing soil thickness by 0.4 cm to 1.4 cm yr^–1. The application of empirical relationships, estimating soil loss by tillage and water runoff, showed that soil erosion at the field sites can be mainly attributed to tillage. The loss in wheat biomass production due to erosion was estimated at 26% on upper slopes for a period of 63 years, while a 14.5% increase in wheat production was estimated due to deposition of soil material in the lower landscape.     

Tillage translocation and tillage erosivity by planting, hilling and harvesting operations common to potato production in Atlantic Canada

In Canada, the negative impacts of tillage erosion is a growing concern, especially in regions where highly erosive cropping and tillage systems are practiced on highly erodible, topographically complex landscapes. To date, tillage erosion studies have focused primarily on the movement of soil by primary and secondary tillage operations. However, in potato (Solanum tuberosum L.) production there is often considerable soil disturbance that occurs during “tertiary” field operations conducted during the growing season. Therefore, the objective of this project was to generate tillage translocation and erosivity values for implements common to planting, hilling and harvesting operations within intensive potato production systems in Atlantic Canada. Our results show that tertiary tillage operations result in significant soil displacement and can be equally as erosive as primary and secondary tillage operations. Both the planting, cultivating and hilling (PCH) sequence and the harvester moved soil extremely large distances (up to 23.6 and 6.0 m, respectively). In fact, the mean translocated distance of the tilled layer (T_L) and the mass of translocated soil (T_M) of the PCH sequence (0.42 m and 115.9 kg m⁻¹, respectively) and the harvester (0.55 m and 71.7 kg m⁻¹, respectively) are larger than those reported previously for primary and secondary tillage operations in New Brunswick. In addition, the net downslope movement of soil for the PCH sequence and the harvester was approximately 36 and 26 kg m⁻¹, respectively, suggesting that both tertiary tillage operations have the potential to be erosive. A direct relationship was observed between both T_L and T_M and slope gradient for the PCH sequence, but similar relationships were not found for the harvester, even though the harvester moved approximately 30 % more soil downslope than upslope. Linear regression functions were generally improved after including slope curvature in the model, but these results were not always significant. Soil movement by the PCH sequence and harvester were also largely influenced by tillage speed and tillage depth, and future research is needed under controlled conditions to determine whether it is changing topography or the variability in tillage speed and depth across the landscape in response to changing topography that is driving tillage erosion within mechanized agricultural systems. It is clear that tertiary tillage operations must be considered when developing best management practices to improve soil conservation strategies for potato production systems in Canada and worldwide.     

耕作侵蚀及其对土壤肥力和作物产量的影响研究进展

在坡耕地景观内,由于农耕工具和重力作用而引起的耕作位移使土壤发生向下坡运动或向上坡运动(依赖于耕作方向),导致净余土壤量向下坡传输、堆积,重新分配,从而形成耕作侵蚀。试验研究表明耕作侵蚀是坡耕地的主要侵蚀形式之一,耕作侵蚀发生最严重的区域是坡度较大、坡体短的坡耕地。该文就耕作侵蚀的概念、发生机理、典型的耕作侵蚀模型的发展,以及耕作侵蚀对土壤肥力和作物产量影响的研究现状作了简要论述,特别总结了针对中国的地貌和耕作工具特征而进行的耕作侵蚀的研究成果。指出在一定的景观范围内,耕作侵蚀是十分严重的,甚至其严重程度已经超过了水蚀。但是相对于水蚀而言,耕作侵蚀研究还很少,因此加强耕作侵蚀的研究是十分必要的。只有这样才能正确评价农耕地侵蚀状况,准确制定土壤保持措施和采用减少耕作侵蚀力的耕作工具,从而有效地控制土壤侵蚀。     

Implement and soil condition effects on tillage-induced erosion

Water, wind, or tillage-induced soil erosion can significantly degrade soil quality. Therefore, understanding soil displacement through tillage translocation is an important step toward developing tillage practices that do not degrade soil resources. Our primary objective was to determine the effects of soil condition (i.e. grassland stubble versus previously tilled soil), opening angle, and harrow speed on soil translocation. A second field study also conducted on a Lixisol but only in the stubble field, quantified displacement effects of mouldboard ploughing. The field studies were located 12 km South of Évora, Portugal. Soil displacement or translocation after each tillage operation in both studies was measured using aluminium cubes with a side length of 15 mm as ‘tracers’. Offset angles for the harrow disk were 20°, 44° and 59°; tractor velocities ranged from 1.9 to 7.0 km h⁻¹ and tillage depth ranged from 4 to 11 cm. The depth of mouldboard ploughing was approximately 40 cm with a wheel speed of 3.7 km h⁻¹. The translocation coefficients for the two implements were very different averaging 770 kg m⁻¹ for the mouldboard plough and ranging from 9 to 333 kg m⁻¹ for the harrow disk. This shows that the mouldboard plough was more erosive than the harrow disk in these studies. All three variables (soil condition, opening angle, and tillage velocity) were critical factors affecting the translocation coefficient for the harrow disk. Displacement distances were the largest for compacted soils (stubble field), with higher opening or offset angles, and at higher velocities. The results also showed significant correlation for (a) mean soil displacement in the direction of tillage and the slope gradient and (b) soil transport coefficient and the opening angle. Our results can be used to predict the transport coefficient (a potential soil quality indicator for tillage erosion) for the harrow disk, provided tillage depth, opening angle, and tool operating speed are known.     

Modelling tillage translocation using step, linear-plateau and exponential functions

The distance over which soil is displaced and mixed during tillage has important implications for the understanding the dynamics of soil variability within complex soil-landscapes. In two preceding studies of tillage translocation, tillage was observed to displace soil over a length of approximately 1 m following single passes of four tillage implements (chisel plough, mouldboard plough, tandem disc and field cultivator), and over a length of approximately 2 m per sequence of conventional tillage (one pass of mouldboard plough, two passes of tandem disc and one pass of field cultivator). Using data from these studies step, linear-plateau and exponential functions were assessed for their ability to estimate the magnitude of translocation and the redistribution pattern of soil within the till-layer, and to predict the redistribution pattern of soil within the till-layer. On average, step, linear-plateau and exponential models estimated 100.0%, 100.2% and 102.5% of the magnitude of translocation and 76%, 88% and 93% of the soil redistribution pattern, respectively. Based on these results, it was concluded that linear-plateau and exponential functions are suitable models of tillage translocation. The exponential model was superior to the step and linear-plateau models, and an improvement over the existing diffusion model.     

等高犁耕朝向对紫色土坡面土壤再分布的影响

选择一块坡长15 m、坡度14.16%的坡地,采用磁性示踪法分析等高向下犁耕（向下坡方向翻垈）和等高向上犁耕（向上坡方向翻垈）的土壤再分布特征,利用模拟耕作（15次）检验两种等高犁耕的长期作用下对土壤剖面和微地貌演化的影响。结果表明:等高向下犁耕导致土壤发生向下坡移动,土壤位移量为15.62～28.70 kg/m,坡度对其影响不显著（p=0.93）;等高向上犁耕导致土壤同时发生向下坡和向上坡移动,土壤净位移量为-10.91～8.23 kg/m,坡度对其有显著影响（p < 0.001）,土壤净位移方向随着坡度的增大由向上坡转为向下坡,本研究条件下临界坡度为14%;等高向下犁耕15次后坡顶侵蚀深度是原土层深度的132%,耕作后土层深度与耕作深度相当,表明等高向下犁耕加速土壤侵蚀和促进母岩成土的双重作用共同维持着坡顶土层深度的稳定;等高向上犁耕15次后坡顶土层深度增加了12.7%,表明等高向上犁耕具有保护坡顶土层深度的作用。等高向上犁耕是一种防治类似紫色土的薄层土壤耕作侵蚀和土壤退化的有效措施。     

Reassessment of tillage erosion rates by manual tillage on steep slopes in northern Thailand

Changing land-use practices in northern Thailand have increased tillage intensity. This study re-assesses the rate of tillage erosion by manual hoeing on steep slopes (17–82%) in northern Thailand. Previously collected soil translocation data during an on-farm tillage erosion experiment and additionally collected data during an on-farm tillage erosion survey have been analysed whereby a new calculation method (i.e. trapezoid tillage step) has been used. A comparison with previously collected data indicates that the trapezoid tillage step method and the tracer method are the most reliable methods to assess downslope translocation by manual tillage. Based on newly acquired understanding of the processes involved, soil fluxes by tillage erosion are quantified by linear functions for different slope gradient classes rather than one single diffusion-type equation for the whole slope range. For slope gradients smaller than 3%, soil fluxes are close to zero as farmers do not have a preferred tillage direction. For slope gradients between 3% and 70%, soil is tilled only in the downslope direction and soil fluxes range between 16 and 67 kg m⁻¹ tillage pass⁻¹. On slopes with gradients in excess of 70%, the angle of repose for soil clods is often exceeded resulting in a sliding down of the complete tilled top layer. These data are used to assess the soil flux for complete cropping cycles for the most dominant cropping systems in the highlands of northern Thailand: i.e. upland rice, maize, (soy) beans, cabbage and ginger. The on-site effects of tillage erosion will be very pronounced if parcels are short with respect to their slope length, cultivated for upland rice or cabbage, or when weed pressure is high. Tillage erosion results in a tillage step with low soil fertility and low infiltration capacity. Solutions to reduce tillage erosion intensity depend on the degree that tillage intensity can be reduced. This might happen by an improved weed management or by changing landuse to perrenial cropping. Other strategies are concentrating nutrients on the truncated hillslope sections and retaining soil on the field by vegetative buffers.     

Specific draught for mouldboard plough, chisel plough and disc harrow at different water contents

The objective of the present study was to measure the specific draught (force per cross-sectional area of worked soil) and energy use for soil fragmentation for different tillage implements and soil conditions. Draught was calculated from measurements of fuel consumption and speed during tillage with a mouldboard plough and a chisel plough set to working depths of 13, 17 and 21 cm, and a disc harrow. Tillage was carried out at three different water contents (“Wet”, “Moist” and “Dry”) on two sites. The average working depth was calculated from weighing the loose soil within a 0.25-m² frame. Specific area of the soil was determined by sieving. Soil strength was measured in situ using a shear vane and a penetrometer. Average working depth was much less than the set working depth for the chisel plough. Specific draught was generally the lowest for the mouldboard plough and the highest for the chisel plough, and increased with decreasing soil water content. The specific draught was strongly correlated to soil cohesion, but not to penetration resistance. The proportion of coarse aggregates after tillage was the highest for the mouldboard plough and the lowest for the moist soil. The energy use for soil fragmentation was in most cases the lowest for the disc harrow, while there were small differences between the chisel and the mouldboard ploughs. The results show that the mouldboard plough is energy efficient for loosening soil, while the disc harrow is energy efficient for soil fragmentation during primary tillage. Tillage at an intermediate water content, close to the plastic limit, gave the largest proportion of small aggregates and consequently the lowest energy use for soil fragmentation.     

Soil displacement and tillage erosion during secondary tillage operations: the case of rotary harrow and seeding equipment

This study reports the results of a series of experiments that were set up on agricultural land in central Belgium to investigate soil translocation and erosivity resulting from a secondary tillage operation using an implement sequence of a rotary harrow and seeder. Aluminium cubes were used as tracers of soil movement. Results show that soil displacement resulting from tillage with such an implement sequence is far from insignificant. This is mainly related to the relatively shallow tillage depth as well as to the loose initial soil condition of such secondary tillage operations. The calculated value for the tillage transport coefficient k (123 kg m⁻¹ per tillage operation) is comparable with k-values from implements that are considered to be more erosive, like mouldboard and chisel implements. In conclusion, this study shows that tillage erosion not only results from relatively aggressive tillage operations such as mouldboard and chisel passes, but that secondary operations contribute significantly to soil displacement and tillage erosion.     

Assessment of tillage translocation and tillage erosion by hoeing on the steep land in hilly areas of Sichuan, China

Most of the tillage erosion studies have focused on the effect of tractor-plough tillage on soil translocation and soil loss. Only recently, have a few studies contributed to the understanding of tillage erosion by manual tillage. Furthermore, little is known about the impact of tillage erosion in hilly areas of the humid sub-tropics. This study on tillage erosion by hoeing was conducted on a purple soil (Regosols) of the steep land, in Jianyang County, Sichuan Province, southwestern China (30°24′N and 104°35′E) using the physical tracer method.

The effects of hoeing tillage on soil translocation on hillslopes are quite evident. The tillage transport coefficients were 26–38 kg m⁻¹ per tillage pass and 121–175 kg m⁻¹ per tillage pass respectively for k₃- and k₄-values. Given that there was a typical downslope parcel length of 15 m and two times of tillage per year in this area, the tillage erosion rates on the 4–43% hillslopes reached 48–151 Mg ha⁻¹ per year. The downslope soil translocation is closely related to slope gradient. Lateral soil translocation by such tillage is also obvious though it is lower than downslope soil translocation. Strong downslope translocation accounts for thin soil layers and the exposure of parent materials/rocks at the ridge tops and on convexities in the hilly areas. Deterioration in soil quality and therefore reduction in plant productivity due to tillage-induced erosion would be evident at the ridge tops and convex shoulders.     

Modeling spatial variation in productivity due to tillage and water erosion

The advent of precision farming practices has heightened interest in managing field variability to optimize profitability. The large variation in yields across many producer fields demonstrated by yield–monitor–equipped combines has generated concern about management-induced causes of spatial variation in soil productivity. Soil translocation from erosion processes may result in variation in soil properties across field landscape positions that produce long-term changes in soil productivity. The objective of this study was to examine the relationships between soil redistribution caused by tillage and water erosion and the resulting spatial variability of soil productivity in a soil catena in eastern South Dakota. An empirical model developed to estimate tillage erosion was used to evaluate changes expected in the soil profile over a 50-year period on a typical toposequence found in eastern South Dakota and western Minnesota. Changes in the soil profile due to water erosion over a 50-year period were evaluated using the WEPP hillslope model. The tillage erosion model and the WEPP hillslope model were run concurrently for a 50-year period to evaluate the combined effect of the two processes. The resulting changes in soil properties of the root zone were evaluated for changes in productivity using a productivity index model. Tillage erosion resulted in soil loss in the shoulder position, while soil loss from water erosion occurred primarily in the mid to lower backslope position. The decline in soil productivity was greater when both processes were combined compared to either process acting alone. Water erosion contributed to nearly all the decline in soil productivity in the backslope position when both tillage and water erosion processes were combined. The net effect of soil translocation from the combined effects of tillage and water erosion is an increase in spatial variability of crop yields and a likely decline in overall soil productivity.     

Tillage erosion within potato production in Atlantic Canada: II: Erosivity of primary and secondary tillage operations

To date, tillage erosion experiments in Canada have only been conducted on conventionally tilled corn-based production systems in Ontario and conventionally tilled cereal-based production in Manitoba. Estimates and assumptions have been made for all other production systems. Therefore, the objective of this study was to evaluate the erosivity of primary and secondary tillage operations within conventional and conservation potato production systems used in Atlantic Canada. Regression analysis determined that a direct relationship exists between slope gradient and both the mean displacement distance of the tilled layer (T_L) and the mass of translocated soil (T_M) for the chisel plough (CP), mouldboard plough (MP) and offset disc (OD), but not for the vibrashank (VS). Overall, the potential for tillage erosion of the MP, CP, and OD was similar (1.8–1.9 kg m⁻¹ %⁻¹ pass⁻¹) and larger than that of the VS (0.3 kg m⁻¹ %⁻¹ pass⁻¹). The regression coefficients for each implement were improved after including slope curvature, and we recommend that curvature be included in any future tillage erosion modelling. Our results show that both residue management to control wind and water erosion and soil movement to control tillage erosion must be considered when choosing implements and developing best management practices with regards to reducing the negative impacts of total soil erosion on potato production systems in Atlantic Canada.