Functional changes in beta-lactoglobulin by conjugation with cationic saccharides

Bovine beta-lactoglobulin (beta-LG) was conjugated to each of three cationic saccharides [glucosamine (GlcN), chitopentaose (CPO), and chitosan (CHS)] by means of a water-soluble carbodiimide or by the Maillard reaction in an effort to improve the functional properties of beta-LG. The molar ratios of beta-LG to the cationic saccharide in the beta-LG-GlcN, beta-LG-CPO, and beta-LG-CHS conjugates were 2:1, 2:5, and 2:1, respectively. Fluorescence studies indicated that the conformation around Trp had changed in each conjugate and that the surface of each of the conjugates was covered with a saccharide chain. Structural analysis using monoclonal antibodies indicated that the conformation around (15)Val-(29)Ile (beta-sheet region) in beta-LG-GlcN and beta-LG-CPO had changed but that in beta-LG-CHS was maintained, whereas the conformation around (125)Thr-(135)Lys (alpha-helix region) in the conjugates had changed. The emulsifying activity of beta-LG was improved by conjugation with CPO or CHS, and aggregation of beta-LG was suppressed by conjugation with CHS. Reduction of the antigenicity and immunogenicity of beta-LG was achieved by conjugation with CHS.     

Reduced immunogenicity of beta-lactoglobulin by conjugation with carboxymethyl dextran differing in molecular weight

To reduce the immunogenicity of beta-lactoglobulin (beta-LG), two beta-LG-carboxymethyl dextran (CMD) conjugates (Conj. 40 and Conj. 162) were prepared by using water-soluble carbodiimide (EDC). The molar ratios of beta-LG to CMD in Conj. 40 and Conj. 162 were 8:1 and 7:1, respectively. Each conjugate maintained approximately 50% of the retinol binding activity of beta-LG. Structural analyses by intrinsic fluorescence, CD spectra, and ELISA with monoclonal antibodies indicated that the surface of beta-LG in each conjugate was covered by CMD without great disruption of native conformation. By conjugation with CMD, the antibody response to beta-LG was reduced in BALB/c, C3H/He, and C57BL/6 mice, which was eminent in Conj. 162. The results of B cell epitope scanning using overlapping synthesized peptides showed that the linear epitope profiles of the conjugates were similar to those of beta-LG, whereas the antibody response to each epitope was reduced, which was eminent in Conj. 162. It was concluded that conjugation with CMD of higher molecular weight is effective in reducing the immunogenicity of beta-LG and that masking of epitopes by CMD is responsible for the reduced immunogenicity.     

Reduced immunogenicity of beta-lactoglobulin by conjugation with acidic oligosaccharides

Bovine beta-lactoglobulin (beta-LG) was conjugated with the acidic oligosaccharides, alginic acid oligosaccharide (ALGO) and phosphoryl oligosaccharides (POs) by the Maillard reaction to reduce the immunogenicity of beta-LG. The molar ratios of beta-LG to ALGO and POs in the conjugates were 1:6 and 1:8. The carbohydrate-binding sites in the beta-LG-ALGO conjugate were partially identified to be (60)Lys, (77)Lys, (100)Lys, (138)Lys, and (141)Lys. The isoelectric point of each conjugate was lower than that of beta-LG. CD spectra indicated that the secondary structure of beta-LG was almost maintained after conjugation. The results of fluorescence studies indicated that the conformation around Trp had not changed in each conjugate and that the surface of each conjugate was covered with a saccharide chain. Structural analyses with monoclonal antibodies indicated that the conformation around (8)Lys-(19)Trp (beta-sheet, random coil, short helix) in the conjugates had changed, whereas the native structure was maintained around (15)Val-(29)Ile (beta-sheet) and (125)Thr-(135)Lys (alpha-helix). The beta-LG-ALGO and beta-LG-POs conjugates maintained 77 and 70% of the retinol binding activity of beta-LG. Conjugation with ALGO and POs substantially enhanced the thermal stability of beta-LG. The anti-beta-LG antibody response was markedly reduced after immunization with both conjugates in BALB/c, C57BL/6, and C3H/He mice. B cell epitopes of beta-LG and the conjugate recognized in these mice were determined with 15-mer multipin peptides, and the linear epitope profiles of the conjugates were found to be similar to those of beta-LG, whereas the antibody response to each epitope was dramatically reduced. In particular, effective reduction of the antibody response was observed in the vicinity of the carbohydrate-binding sites. Conjugation of beta-LG with these acidic oligosaccharides was effective in reducing the immunogenicity of beta-LG. The conjugates obtained in this study are edible, so they would be very useful for food application.     

Reduced T cell response to beta-lactoglobulin by conjugation with acidic oligosaccharides

We have previously reported that the conjugation of beta-lactoglobulin (beta-LG) with alginic acid oligosaccharide (ALGO) and phosphoryl oligosaccharides reduced the immunogenicity of beta-LG. In addition, those conjugates showed higher thermal stability and improved emulsifying properties than those of native beta-LG. We examine in this study the effect of conjugation on the T cell response. Our results demonstrate that the T cell response was reduced when mice were immunized with the conjugates. The findings obtained from an experiment using overlapping synthetic peptides show that novel epitopes were not generated by conjugation. One of the mechanisms for the reduced T cell response to the conjugates was found to be the reduced susceptibility of the conjugates to processing enzymes for antigen presentation. We further clarify that the beta-LG-ALGO conjugate modulated the immune response to Th1 dominance. We consider that this property of the beta-LG-ALGO conjugate would be effective for preventing food allergy as well as by its reduced immunogenicity. Our observations indicate that the method used in this study could be applied to various protein allergens to achieve reduced allergenicity with multiple improvements in their properties.     

Effect of sulfated polysaccharides on heat-induced structural changes in beta-lactoglobulin

The mechanism that leads to a decreased aggregation of beta-lactoglobulin in the presence of dextran sulfate and lambda-carrageenan was investigated by assessing changes in the denaturation thermodynamics and protein structure. Differential scanning calorimetry results showed that the denaturation temperature (Tp) was about 4.6 degrees C higher in the presence of dextran sulfate, as compared with beta-lactoglobulin alone, whereas in the presence of lambda-carrageenan the difference in Tp was about 1.2 degrees C. Changes in protein structure studies using near-UV circular dichroism (CD) provided support for the calorimetric results. The transition midpoint (Tm) for denaturation of beta-lactoglobulin was about 5 degrees C higher in the presence of dextran sulfate than that found with beta-lactoglobulin alone and about 2 degrees C in the presence of lambda-carrageenan. Thermal modifications of the tertiary structure of beta-lactoglobulin were irreversible at temperatures above 67 degrees C; the addition of dextran sulfate reduced the extent of such modifications. Far-UV CD studies indicated that the addition of dextran sulfate or lambda-carrageenan did not affect secondary structure changes of beta-lactoglobulin upon heating. These studies indicate that dextran sulfate and lambda-carrageenan can enhance the stability of beta-lactoglobulin and thereby inhibit heat denaturation and aggregation.     

Heat treatment of beta-lactoglobulin: structural changes studied by partitioning and fluorescence

Functional properties of whey protein concentrates (WPC) are primarily dependent on the degree of denaturation of beta-lactoglobulin (beta-LG), the major globular whey protein. Irreversible modifications in the tertiary structure and association state of beta-LG after heat treatment were studied by partition in aqueous two-phase systems and fluorescence quenching. Partitioning of preheated beta-LG in two-phase systems containing 5% (w/w) poly(ethylene glycol) and 7% (w/w) dextran, between pH 6.0 and7.0, are appropriately related with the intensity of heat treatment. An increase in the partition coefficient of beta-LG was observed with increasing temperature of heat treatment. On the other hand, fluorescence quenching of beta-LG by acrylamide was used to study the conformational flexibility of the protein at pH values between 4. 0 and 9.0. The values of bimolecular quenching rate constant (k(q)) obtained showed that beta-LG appears to be more flexible at high pH values, while at low pH the protein assumes a more compact form. The efficiency of acrylamide quenching on preheated beta-LG was substantially more pronounced than for the untreated protein. This difference can be ascribed to the presence of unfolded monomers and aggregates of denatured molecules formed after heat treatment, whose tryptophanyl residues are more exposed to the solvent. In conclusion, the results suggest that partition studies in aqueous two-phase systems and fluorescence quenching are very useful tools to detect changes in conformation and aggregation of beta-LG induced by heat treatment.     

Pressure-induced conformational changes of beta-lactoglobulin by variable-pressure Fourier transform infrared spectroscopy.

Pressure-induced conformational changes in D(2)O solutions of the two genetic variants of beta-lactoglobulin A (beta-lg A) and beta-lactoglobulin B (beta-lg B) and an equal mixture of both variants (beta-lg A+B) were studied by employing variable-pressure Fourier transform infrared (VP-FTIR) spectroscopy. Changes in the secondary structure of beta-lg A were observed at lower pressure compared to beta-lg B, indicating that beta-lg A had a more flexible structure. During the decompression cycle beta-lg A showed protein aggregation, accompanied by an increase in alpha-helical conformation. The changes in the secondary structure of beta-lg B with the pressure were minor and for the most part reversible. Upon decompression no aggregation in beta-lg B was observed. Increasing the pressure from 0.01 to 12.0 kbar of a solution containing beta-lg A+B resulted in substantial broadening of all major amide I bands. This effect was partially reversed by decreasing the hydrostatic pressure. beta-lg A+B underwent less aggregate formation than beta-lg A, possibly as a result of protein-protein interactions between beta-lg A and beta-lg B. Hence, it is likely that the functional or biological attributes of beta-lg proteins may be affected in different ways by hydrostatic pressure.     

Riboflavin-sensitized photochemical changes in beta-lactoglobulin in an aqueous buffer solution as affected by ascorbic acid

The effects of ascorbic acid on the riboflavin-sensitized photochemical changes in beta-lactoglobulin in an aqueous buffer solution as determined by high performance gel permeation liquid chromatography (HPGPLC), insoluble protein content, and individual amino acid content during fluorescent light illumination were studied. The riboflavin-sensitized photochemical degradation of beta-lactoglobulin was effectively inhibited by ascorbic acid, and its inhibitory effectiveness was concentration dependent. The 0.1% ascorbic acid treatment showed 74.4% inhibition of beta-lactoglobulin degradation as determined by a HPGPLC during 6 h light illumination. Insolubility of beta-lactoglobulin in a buffer solution during light illumination was also effectively decreased by ascorbic acid treatment. The riboflavin-sensitized photochemical reduction of cysteine, histidine, lysine, methionine, and tryptophan in beta-lactoglobulin was high during 6 h fluorescent light illumination. The 0.1% ascorbic acid treatment exhibited 20.8% inhibition of total amino acid degradation in beta-lactoglobulin during 6 h light illumination, showing strong inhibitory activity against the degradation of arginine, aspartic acid, cystein, glycine, histidine, phenylalanine, proline, serine, and tryptophan.     

Characterization and in vitro digestibility of bovine beta-lactoglobulin glycated with galactooligosaccharides

Galactooligosaccharides (GOS) are well-known prebiotic ingredients which can form the basis of new functional dairy products. In this work, the production and characterization of glycated beta-lactoglobulin (beta-LG) with prebiotic GOS through the Maillard reaction under controlled conditions ( a(w) = 0.44, 40 degrees C for 23 days) have been studied. The extent of glycation of beta-LG was evaluated by formation of furosine which progressively increased with storage for up to 16 days, suggesting that the formation of Amadori compounds prevailed over their degradation. RP-HPLC-UV, SDS-PAGE, and IEF profiles of beta-LG were modified as a consequence of its glycation. MALDI-ToF mass spectra of glycated beta-LG showed an increase of up to approximately 21% in its average molecular mass after storage for 23 days. Moreover, a decrease in unconjugated GOS (one tri-, two tetra-, and one pentasaccharide) was observed by HPAEC-PAD upon glycation. These results were confirmed by ESI MS. The stability of the glycated beta-LG to in vitro simulated gastrointestinal digestion was also described and compared with that of the unglycated protein. The yield of digestion products of glycated beta-LG was lower than that observed for the unglycated protein. The conjugation of prebiotic carbohydrates to stable proteins and peptides could open new routes of research in the study of functional ingredients.     

Swelling of biocrusts upon wetting induces changes in surface micro-topography

In most of non-vegetated areas from drylands, soils are colonized by biocrusts, and although they represent a small fraction of the soil profile, they strongly affect several soil surface properties, such as porosity, available nitrogen and carbon content, hydrophobicity or micro-topography. The influence of BSCs on these soil properties has effects on numerous ecosystem processes, including water retention and runoff generation. Previous studies on the hydrological and erosive response of soils covered by biocrusts have highlighted the role of soil surface roughness as a key variable for understanding the influence of biocrusts on runoff and erosion, but biocrusts' effects on surface micro-topography varies depending on crust water content. Biocrusts can absorb large amounts of water in a short period of time, increasing their volume and modifying surface micro-topography, this change depending on biocruts type and development. A correct characterization of these surface variations may increase the knowledge about hydrological response of biocrusts, and for this reason, accurate ground level measurements of biologically crusted surfaces are essential. The objective of this study is to analyze the effect of wetting on surface micro-topography of biologically crusted soils. To achieve this objective, different crust types were scanned in the laboratory with high resolution laser scanner. Five samples were collected for each of the 4 different crust types (bare soil, cyanobacteria biocrust, and two different lichen biocruts). Two different scans were made in each sample, in dry and wet conditions. Random roughness (RR) was calculated for data from every scan, and the RR indexes obtained before and after wetting were compared. According with our initial hypothesis, an increase in surface height and surface roughness up to 0.24 and 0.20 mm respectively was observed in more developed lichen biocruts, under wet conditions respect to dry ones. These differences, despite being very subtle, could exert strong implications on runoff generation, and water evaporation, and show the complex interactions between biocruts, surface micro-topography and water fluxes.     

Denaturation of beta-lactoglobulin in pressure-treated skim milk

The kinetics of beta-lactoglobulin (beta-LG) denaturation in pressure-treated reconstituted skim milk samples over a wide pressurization range (100-600 MPa) and at various temperatures (10-40 degrees C) was studied. Denaturation was extremely dependent on the pressure and duration of treatment. At 100 MPa, no denaturation was observed regardless of the temperature or the holding time. At higher pressures, the level of denaturation increased with an increasing holding time at a constant pressure or with increasing pressure at a constant holding time. At 200 MPa, there was only a small effect of changing the temperature at pressurization. However, at higher pressures, increasing the temperature from 10 to 40 degrees C markedly increased the rate of denaturation. The two major genetic variants of beta-LG (A and B) behaved similarly to pressure treatment, although the B variant appeared to denature slightly faster than the A variant at low pressures (< or =400 MPa). The denaturation could be described as a second-order process for both beta-LG variants. There was a marked change in pressure dependence at about 300 MPa, which resulted in markedly different activation volumes in the two pressure ranges. Evaluation of the kinetic and thermodynamic parameters suggested that there may have been a transition from an aggregation-limited reaction to an unfolding-limited reaction as the pressure was increased.     

Early structural changes in myosin rod upon heating of carp myofibrils

Upon heating carp myofibrils at 40 degrees C, the amount of myosin that is soluble and monomeric dropped very quickly, roughly 5 times faster than the ATPase inactivation. This rapid decrease of solubility was well explained by a rapid denaturation of the rod portion as measured by chymotryptic digestibility. Chymotryptic digestion of heated myofibrils in a low-salt medium with EDTA generated a reduced amount of rod and subfragment-1 (S-1). The decrease of S-1 produced from the heated myofibrils was consistent with the ATPase inactivation. The decrease of rod produced from the heated myofibrils was explained by the increased susceptibility of the heavy meromyosin (HMM)/light meromyosin (LMM) junction to chymotryptic. It was, therefore, concluded that the fastest event occurring in the myosin molecule upon heating of myofibrils is the irreversible exposure of the HMM/LMM junction.     

Interaction of alkylsulfonate ligands with beta-lactoglobulin AB from bovine milk.

The interaction of alkyl sulfonate ligands (AL) with bovine beta-lactoglobulin AB was measured using Trp fluorescence enhancement. One binding site per protein molecule was observed. The location of this site was related with the dimer formation and could be coincident with the fatty acids and SDS binding site. The apparent binding constants for AL were in the range of 10(-)(6) M, at pH 6.8. At pH 3.0 no binding was observed by this fluorescence method. The strength of the interaction was decreasing in the following way: AL16 > AL12 > AL14 > AL10. Other sites on the monomer were evidenced by the protective action of the AL toward the urea unfolding of the protein.     

Interactions of vitamin D3 with bovine beta-lactoglobulin A and beta-casein

It is of nutritional significance to fortify processed dairy products (e.g., cheese, yogurt, and ice cream) with vitamin D3; however, the inherent complexity of these foods may influence the stability and bioavailability of this nutrient. In the present study, the interactions of vitamin D3 with beta-lactoglobulin A and beta-casein were investigated under various environmental conditions (i.e., pH and ionic strength) using fluorescence and circular dichroism spectroscopic techniques. The results indicated that vitamin D3 was bound to both beta-lactoglobulin A and beta-casein depending on the solution conditions. The apparent dissociation constants ranged from 0.02 to 0.29 microM for beta-lactoglobulin A, whereas the beta-casein apparent dissociation constants ranged from 0.06 to 0.26 microM. The apparent mole ratios were also comparable, i.e., 0.51-2.04 and 1.16-2.05 mol of vitamin D3 were bound per mole of beta-lactoglobulin A and beta-casein, respectively. It was concluded that these interactions may strongly influence vitamin D3 stability and, hence, bioavailability in processed dairy products.     

Physical and oxidative stability of fish oil-in-water emulsions stabilized with beta-lactoglobulin and pectin

The oxidation of fatty acids can be inhibited by engineering the surface of oil-in-water emulsion droplets to decrease interactions between aqueous phase prooxidants and lipids. The objective of this research was to evaluate whether emulsions stabilized by a multilayer emulsifier systems consisting of beta-lactoglobulin and citrus or sugar beet pectin could produce fish oil-in-water emulsions that had good physical and oxidative stability. Sugar beet pectin was compared to citrus pectin because the sugar beet pectin contains the known antioxidant, ferulic acid. A primary Menhaden oil-in-water emulsion was prepared with beta-lactoglobulin upon which the pectins were electrostatically deposited at pH 3.5. Emulsions prepared with 1% oil, 0.05% beta-lactoglobulin, and 0.06% pectins were physically stable for up to 16 days. As determined by monitoring lipid hydroperoxide and headspace propanal formation, emulsions prepared with the multilayer system of beta-lactoglobulin and citrus pectin were more stable than emulsions stabilized with beta-lactoglobulin alone. Emulsions prepared with the multilayer system of beta-lactoglobulin and sugar beet pectin were less stable than emulsions stabilized with beta-lactoglobulin alone despite the presence of ferulic acid in the sugar beet pectin. The lower oxidative stability of the emulsions with the sugar beet pectin could be due to its higher iron and copper concentrations which would produce oxidative stress that would overcome the antioxidant capacity of ferulic acid. These data suggest that the oxidative stability of oil-in-water emulsions containing omega-3 fatty acids could be improved by the use of multilayer emulsion systems containing pectins with low metal concentrations.     

Gelling properties of heat-denatured beta-lactoglobulin aggregates in a high-salt buffer

Thermal denaturation, rheological, and microstructural properties of gels prepared from native beta-lactoglobulin (beta-LG) and preheated or heat-denatured beta-LG (HDLG) aggregates were compared. The HDLG was prepared by heating solutions of 4% beta-LG in deionized water, pH 7.0, at 80 degrees C for 30 min and then diluted to the desired concentration in 0.6 M NaCl and 0.05 M phosphate buffer at pH 6.0, 6.5, and 7.0. When reheated to 71 degrees C, HDLG formed a gel at a concentration of 2% protein. At pH 7.0, 3% HDLG gelled at 52.5 degrees C and had a storage modulus (G') of 2200 Pa after cooling. beta-LG (3%) in 0.6 M NaCl and 0.05 M phosphate buffer, pH 7.0, did not gel when heated to 71 degrees C. The gel point of 3% HDLG decreased by 10.5 degrees C and the G' did not change when the pH was decreased to 6.0. The HDLG gel microstructure was composed of strands and clumps of small globular aggregates in contrast to beta-LG gels, which contained a particulate network of compacted globules. The HDLG formed a gel at a lower concentration and lower temperature than beta-LG in the high-salt buffer, suggesting an application in meat systems or other food products prepared with salt and processed at temperatures of < or =71 degrees C.     

Interactions between beta-lactoglobulin and pectins during in vitro gastric hydrolysis

This paper deals with the influence of different levels of three pectins, low-methylated pectin (LMP), high-methylated pectin (HMP), and low-methylated and amidated pectin (LMA), on the in vitro gastric hydrolysis of beta-lactoglobulin (beta-lg). Proteolysis by pepsin consisted of a 2-h progressive reduction of pH. A turbidity measurement of beta-lg-pectin mixtures was carried out during the proteolysis. The influence of pectins on pepsin enzymatic activity was also evaluated. beta-Lg was resistant to peptic digestion. The presence of each of the three pectins at a concentration of 50 wt % increased the N release at all pH values considered, despite a significant inhibition of the pepsin enzymatic activity with the pectins. The turbidity of beta-lg solutions during proteolysis was reduced by the addition of pectins, because of the formation of electrostatic complexes between this protein and pectins. The increase of N release could be a false positive result due to the difficulty of precipitating protein by trichloroacetic acid because of the formation of electrostatic complexes demonstrated by the decrease of turbidity.     

Improved bread-baking process using Saccharomyces cerevisiae displayed with engineered cyclodextrin glucanotransferase

A bread-baking process was developed using a potential novel enzyme, cyclodextrin glucanotransferase[3-18] (CGTase[3-18]), that had previously been engineered to have enhanced hydrolyzing activity with little cyclodextrin (CD) formation activity toward starch. CGTase[3-18] was primarily manipulated to be displayed on the cell surface of Saccharomyces cerevisiae. S. cerevisiae carrying pdeltaCGT integrated into the chromosome exhibited starch-hydrolyzing activity at the same optimal pH and temperature as the free enzyme. Volumes of the bread loaves and rice cakes prepared using S. cerevisiae/pdeltaCGT increased by 20% and 45%, respectively, with no detectable CD. Retrogradation rates of the bread and rice cakes decreased significantly during storage. In comparison to the wild type, S. cerevisiae/pdeltaCGT showed improved viability during four freeze-thaw cycles. The results indicated that CGTase[3-18] displayed on the surface of yeast hydrolyzed starch to glucose and maltose that can be used more efficiently for yeast fermentation. Therefore, display of an antistaling enzyme on the cell surface of yeast has potential for enhancing the baking process.