Characterization of oil palm empty fruit bunch and glass fibre reinforced recycled polypropylene hybrid composites

The effects of hybridization of glass fibre on oil palm empty fruit bunch (EFB) and recycled polypropylene-based composites are described in this paper. The compounding process involved extrusion followed by injection moulding technique to prepare the samples for characterizations. Fibre loading were considered as 40 % of the total weight of the blends and EFB:glass fibre ratio was maintained as 30:70, 50:50, 70:30 and 90:10. Two types of coupling agents of maleic anhydride-grafted polypropylene such as polybond-3200 and fusabond P-613 of different molecular weight and maleic anhydride level were used to improve the interfacial adhesion between the fibres and the matrix. Composites were characterized by density, melt flow index, tensile, Izod impact and flexural testing. Morphological images of the fractured surfaces of the composites were examined by field-emission scanning electron microscopy. Samples were also characterized by thermal tests such as thermogravimetric analysis and differential scanning calorimetry to evaluate the thermal and crystalline properties, respectively. Optimization of hybridization of the fibres and effect of coupling agents were evaluated in terms of various properties of the samples. The composite prepared with EFB:glass fibre ratio of 70:30 showed better reinforcing properties than that of others.     

Effect of boron phosphate on the mechanical, thermal and fire retardant properties of polypropylene and polyamide-6 fibers

The effect of boron phosphate (BPO₄) nanoparticles on the mechanical, thermal, and flame retardant properties of polypropylene (PP) and polyamide 6 (PA-6) fibers are investigated by tensile testing, thermogravimetric analysis (TGA), differential scanning calorimeter (DSC), and micro combustion calorimeter (MCC). The addition of BPO₄ reduces the mechanical properties of the both PP and PA-6 fibers. According to the TGA results, the addition of BPO₄ does not change the thermal behavior of PP fiber and slightly reduces the thermal stability of PA-6 fiber by about 30 °C. According to MCC results, the addition of BPO₄ does not change the effective total heat evolution and heat release rate (HRR) peak for PP fibers. Although the inclusion of BPO₄ does not change the total heat evolution of PA-6 fiber, it reduces the HRR peaks due to increase in barrier effect of char.     

Mechanical and thermal properties of recycled poly(ethylene terephthalate) reinforced newspaper fiber composites

This study presents the mechanical and thermal properties of environment-friendly composites made from recycled newspaper fibers reinforced recycled poly(ethylene terephthalate) (rPET) resin with the addition of styrene-ethylene-butylene-styrene grafted maleic anhydride (SEBS-g-MA) as compatibilizer. The effect of SEBS-g-MA addition (i.e., 10 phr) by using a twin-screw extruder to the rPET resin, followed by different fiber content (5, 10 and 15 wt.%) on the tensile, flexural and impact properties of the composites were determined. Stiffness of composites increased significantly compared to those of rPET/SEBS-g-MA blend. Fiber addition resulted in moderate increases in both tensile and flexural strength of the composites. Scanning electron microscope (SEM) photomicrographs of the impact fracture surfaces demonstrate good adhesion at 5 and 10 % fiber content. Differential scanning calorimetry (DSC) showed that the presence of newspaper fibers enhanced the nonisothermal crystallization kinetics and crystallinity. Thermal stability of the composites was improved as indicated by thermogravimetric analysis (TGA).     

Effect of coir fiber content and compatibilizer on the properties of unidirectional coir fiber/polypropylene composites

The main objective of this research was to study the effect of fiber content variation and stearic acid (SA) treatment on the fundamental properties of unidirectional coir fiber (CF) reinforced polypropylene (PP) composites. Several percentages of filler contents were used (10–40 wt %) in order to gain insights into the effect of filler content on the properties of the composites. Coir/PP composites were fabricated by compression molding, and the properties of composites were studied by physico-mechanical and thermal properties. The results from mechanical properties such as tensile strength (TS), tensile modulus (TM) and impact strength (IS) of the CF/PP composites were found to be increased with increasing fiber content, reached an optimum and thereafter decreased with further increase in fiber content. Treatment of the coir with SA as the coupling agent enhanced the mechanical properties, crystallization temperature and crystallinity of virgin PP and water desorption of the resulting composites, resulting from the improved adhesion between the CF and PP matrix. Scanning electron micrographs (SEM) of the tensile fractured samples showed improved adhesion between fiber and matrix upon treatment with SA. Interfacial shear strength (IFSS) of the composites was measured by single fiber fragmentation test (SFFT).     

Effect of water and fiber length on the mechanical properties of polypropylene matrix composites

This paper presents the results of a current study on polypropylene matrix composites processed by injection, with two different glass fiber lengths and five different volume fractions. Physical and mechanical properties were obtained, namely flexural strength, stiffness modulus and fracture toughness. The mechanical properties of the composites increased significantly with the increase of the fibers volume fraction in agreement with the Counto model. The effect of water immersion time was also analysed. Immersion in water promotes a marked decrease in mechanical properties in the early seven-ten days, and afterwards tends to stabilize. Water causes a decrease of the relative strength which increases with fiber volume fraction and reaches about 29 % and 32 % for 20 % of 4.5 mm fiber length and for 25 % of 12 mm fiber length respectively, after 28 days immersion in water. Fracture toughness increases with fiber volume fraction and is always higher for 12 mm fiber length composites than for 4.5 mm fiber length composites.     

Morphology and mechanical properties of sisal fibre/vinyl ester composites

Sisal fibres were subjected to a 2 % sodium hydroxide solution treatment for 2, 5 and 8 h at 35 °C. Change in chemical composition of the alkali treated fibres in comparison to that of the untreated fibres was evaluated. Fibres were characterized with respect to its FTIR, linear density, crystallinity, tenacity, modulus and % breaking strain. Tenacity of the fibres increased initially and then decreased as the time of alkali treatment was increased. Modulus of elasticity of the fibres increased with increase in alkali treatment time. Fibres lost breaking strain (%) gradually with increase in treatment time. Variation in mechanical properties of composites was studied with respect to the duration time of alkali treatment of fibres. The failure mode was particularly investigated before and after treatment for better understanding of the effect of alkali treatment.     

Effect of inorganic fillers and ammonium polyphosphate on the flammability,thermal stability,and mechanical properties of abaca-fabric/vinyl ester composites

In order to comply with the safety environment requirements, this research is being carried out for reinforcing inorganic additives to improve fire retardancy of composite. In the present study, abaca fabric/vinyl ester (AF/VE) composites were prepared by vacuum assisted resin transfer (VARTM) molding process. For improving flame retardant property of the composites, three different types of halogen free inorganic fillers, i.e. nano-clay (NC), halloysite nanotubes (HNT) and ammonium polyphosphate (APP) were used. The flammability, thermal stability and mechanical properties of composites have been investigated by Horizontal burning test, Thermogravimetric analysis (TGA), tensile, and flexural test respectively. FESEM was used to observe the morphology of the fractured surface of the tensile specimens. Taguchi method was used to optimize the process and minimize the number of experiments for fillers addition. The results showed that the flame retardancy and thermal stability increased with increasing percentage of fillers, but mechanical properties slightly decreased simultaneously.     

Effects of cross-linking on mechanical and physical properties of agricultural residues/recycled thermoplastics composites

Maleated graft polyolefins as cross-linking agents (CAs) are widely used to improve properties of wood thermoplastic composites made by melt extrusion process. In this study, novel CAs, free isocyanate group (NCO)-terminated urethane pre-polymers (UPs) were synthesized and used in manufacturing wheat straw (WS)/recycled polyethylene (PE) composites. The composites using polymeric diphenylmethane diisocyanate (pMDI) as a CA were also made in comparison. The relationship between composite properties and the level of CA and its content as well as the composite density and hot pressing time were investigated based on wood based board processes. The results show that the internal bonding (IB) strength, the IB after soaked in boiling water for 2 h (2hWIB), the modulus of rupture (MOR), the modulus of elasticity (MOE) and the 24 h thickness of swell after absorption of water (24hTS) of the composites are significantly improved with increased CA contents and composite densities. The optimal hot pressing time is 1.1 min/mm at 180°C. The cross-linking function is attributed to the reaction between free NCOs of CA molecules with hydroxyls of WS and the moisture in the raw materials, as well as the interaction between weak polar chain segments in the CA molecules to the non-polar PE. It is highly feasible to manufacture high quality composite using WS and recycled PE as raw materials when cross-linked with just 2.5% of UPs.     

Effects of heat treatment on the properties of bamboo fiber/polypropylene composites

In this paper, the effects of heat treated parameters on the properties of bamboo fiber (BF) / polypropylene (PP) composites were investigated. The crystallization properties of BF/PP composites after heat treatment were characterized by differential scanning calorimetry (DSC), and the mechanical properties were measured. The results showed that the crystallinities of the heat treated composite were enhanced compared with that of the untreated. When the heat treated time was 30 mins, the crystallinities became almost unchanged. However, the crystallinity decreased after 12 h heat treatment. In addition, when the heat treated temperature was above 90 °C, the higher the temperature was, the higher the crystallinities became. Moreover, the tensile strengths of BF/PP composites increased and then decreased with increasing heat treated time, while the impact strengths had a decreasing trend. In the meanwhile, the tensile strengths increased but the impact strengths decreased as the heat temperature increased.     

Effect of mercerization on mechanical, thermal and degradation characteristics of jute fabric-reinforced polypropylene composites

Jute fabric reinforced polypropylene composites were fabricated by compression molding technique. Fiber content in the composites was optimized at 45 % by weight of fiber by evaluating the mechanical parameters such as tensile strength, tensile modulus, bending strength, bending modulus. Surface treatment of jute fabrics was carried out by mercerizing jute fabrics with aqueous solutions of NaOH (5, 10 and 20 %) at different soaking times (30, 60 and 90 mins) and temperatures (0, 30 and 70 °C). The effect of mercerization on weight and dimension of jute fabrics was studied. Mechanical properties of mercerized jute-PP composites were measured and found highest at 20 % NaOH at 0 °C for 60 min soaking time. Thermal analytical data from thermogravimetric and differential thermal analysis showed that mercerized jute-PP composite achieved higher thermal stability compared to PP, jute fabrics and control composite. Degradation characteristics of the composites were studied in soil, water and simulated weathering conditions. Water uptake of the composites was also investigated.     

Impact properties of glass-fiber/polypropylene composites: The influence of fiber loading, specimen geometry and test temperature

Glass fiber reinforced polypropylene composites were compounded with a twin-screw extruder and injection molded. Fiber length distribution study showed that more fiber degradation occurred during processing of the composites with higher fiber loading. Dynamic mechanical analysis carried out showed that magnitudes of storage and loss modulus of composites are improves with the presence of the glass fiber in the system. The incorporation of fibers into the composites has slightly shifted the glass transition temperature to lower values. On the other hand, the presence of the glass fiber reduces the magnitude of tan δ at α-transition dramatically due to the strengthening effect by the fibers. From impact test, it was found that increment in glass fiber loading leads to an increase in peak load, critical strain energy release rate and critical stress intensity factor indicating the improvement in the material toughness. However, there was no significant change observed in fracture energy. With respect to increasing in specimen geometry, despite an improvement in peak load and fracture energy of the impact specimen, the critical strain energy release rate and critical stress intensity factor values were decreased. On the other hand, increase in test temperature resulted in reduction of peak load and critical stress intensity factor due to increment in material ductility, whereby fracture energy and critical strain energy release rate improved.     

Basic properties of grain by-products and their viability in polypropylene composites

The objective was to study the potential of grain by-products (husk) of grains such as wheat (Triticum aestivum L; German name is Weizen) and rice (Oryza sativa) as reinforcements for thermoplastics as an alternative to or in combination with wood fibres. Prior to composites preparation, the chemical components of fibres such as cellulose, hemi-cellulose, lignin, starch, protein and fat were measured and the surface chemistry and functionality of grain by-products were studied using EDX and FT-IR. Structural constituents (cellulose, starch) were found in wheat husk (W) equal 42%, in rice husk 50% and in soft wood 42%, respectively. Thermal degradation characteristics, the bulk density, water absorption and the solubility index were also investigated. Wheat husk (W) and rice husk were found thermally stable at temperatures as low as 178 °C and 208 °C, respectively. The particle morphology and particle size were investigated using microscopy. Water absorption properties of the fibres were studied to evaluate the viability of these fibres as reinforcements. Polypropylene composites were fabricated using a high speed mixer and an ensuing injection moulding process with 40 wt% fibre. The tensile and Charpy impact strength of the resulting composites were investigated. The tensile elongation at break was found to 75% for wheat husk (W) composites and 23% for rice husk composites better than soft wood composites. Rice husk composites showed 13% better Charpy impact strength than soft wood composites. Due to coupling agent, tensile strength of composites found to improve 25% for soft wood, 35% for wheat husk (W) and 45% for rice husk.     

Mechanical and thermal degradation behavior of sisal fiber (SF) reinforced recycled polypropylene (RPP) composites

The present investigation focuses on the effect of fiber surface treatment on the mechanical, thermal and morphological properties of sisal fiber (SF) reinforced recycled polypropylene (RPP) composites. The surface of sisal fiber was modified using different chemicals such as silane, glycidyl methacrylate (GMA) and O-hydroxybenzene diazonium chloride (OBDC) to improve the compatibility between fiber surface and polymer matrix. The experimental results revealed an improvement in the tensile strength to 11 %, 20 % and 31.36 % and impact strength to 78.72 %, 77 % and 81 % for silane, GMA and OBDC treated sisal fiber reinforced recycled polypropylene (RPP/SF) composites respectively as compared to RPP. The thermo gravimetric analysis (TGA), Differential scanning calorimeter (DSC) and heat deflection temperature (HDT) results revealed improved thermal stability as compared with RPP. The morphological analysis through scanning electron micrograph (SEM) supports improves surface interaction between fiber surface and polymer matrix.     

Chitosan-filled polypropylene composites: The effect of filler loading and organosolv lignin on mechanical,morphological and thermal properties

In this work, the effect of organosolv lignin on properties of polypropylene (PP)/chitosan composites was investigated. Mechanical and thermal properties of the composites were analyzed by means of ASTM D 638-91, ASTM D 256, thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC). Tensile strength and elongation at break of the PP composites decreased upon the presence of chitosan filler, but Young’s modulus improved. Impact strength was found to increase with the maximum value at 30 php of filler loading. At a similar loading, treated PP/chitosan composites were found to have higher tensile strength, elongation at break, Young’s modulus as well as impact strength than untreated composites. Furthermore, the presence of organosolv lignin imparted a plasticizing effect. Thermal properties of the treated PP/chitosan composites were better as compared with the untreated PP/chitosan composites; although the chemical treatment did not alter the thermal degradation mechanism. In addition, the obtained results were comparable to results from previous studies. This finding implied that the organosolv lignin could be a potential reagent to replace its synthetic counterpart.     

Influence of wood species and particle size on mechanical and thermal properties of wood polypropylene composites

This study aims to investigate the effects of two types of wood flour; oil palm mesocarp flour (OMF) and rubberwood flour (RWF), and their particle sizes on mechanical, physical, and thermal properties of wood flour reinforced recycled polypropylene (rPP) composites. The composite materials were manufactured into panels by using a twin-screw extruder. The rPP composites based on RWF significantly showed higher flexural, tensile, and compressive properties (both strength and modulus) as well as hardness and thermal stability than those composites based on OMF for the same particle sizes. However, distribution of RWF in the rPP matrix was less homogeneous than that of the rPP/OMF composites. Furthermore, a decrease of the particle sizes of filler for the rPP/OMF or RWF composites increased the flexural, tensile, compressive, and hardness properties. Likewise, the thermal stability of both OMF and RWF composites were insignificantly affected by the particle sizes.     

Mechanical properties,morphology and dynamic mechanical properties of LGF/TPU/SAN composites

A series of the long glass fiber reinforced thermoplastic polyurethane elastomers and poly (styrene-acrylonitrile) (LGF/TPU/SAN) composites with different contents of long glass fiber were prepared by using self-designed impregnation device. Dynamic mechanical properties of TPU/SAN matrix reinforced with 10, 20 and 30 % by weight long glass fibers have been investigated by using dynamic mechanical thermal analysis (DMA). The results indicated that the content of long glass fiber and scanning frequency had some influence on dynamic mechanical properties and glass transition of LGF/TPU/SAN composites. In addition, the Arrhenius relationship has been used to calculate the activation energy of a-transition of the LGF/TPU/SAN composites. SEM demonstrates the relatively good dispersion of the long glass fiber in the TPU/SAN matrix. In addition, Effects of the content of long glass fiber on mechanical properties of the LGF/TPU/SAN composites are investigated.     

Effect of nanoclay and magnesium hydroxide on some properties of HDPE/wheat straw composites

Since natural fiber/polymer composites are increasingly used, the development of safe and environmental friendly flame retarding bio-based composites is of great importance. But this issue must maintain the mechanical performance of these composites. To study these objectives, four levels of magnesium hydroxide Mg(OH)₂ of (0, 10, 20, 30 phc) and two levels of nanoclay (0, 3 phc) were considered and incorporated into HDPE/wheat straw composites. Maleic anhydride grafted polyethylene (PE-g-MA) was also used as a compatibilizer at constant content. The samples were prepared by melt compounding and injection molding processes, respectively. The some properties of samples including burning rate and mechanical properties (tensile and impact strengths) were tested based on the ASTM standard. The results showed that the burning rate of samples decreased with increasing the nanoclay and Mg(OH)₂ content. The tensile and impact strengths showed a marginal reduction by adding Mg(OH)₂ from 10 phc to 30 phc and the tensile modulus and impact strength revealed an increase by increasing the amount of nanoclay up to 3 phc. Generally, these results confirmed that the fire retarding and mechanical properties of HDPE/wheat straw composites could be significantly improved with an appropriate combination of the nanoclay and Mg(OH)₂ in the composites.     

Effects of date palm leaf fiber on the thermal and tensile properties of recycled ternary polyolefin blend composites

This work investigated the effects of date palm leaf fiber (DPLF) content on the thermal and tensile properties; and morphology of compatibilized polyolefin ternary blend. Recycled polyolefin ternary blend consisting of low density polyethylene (RLDPE), high density polyethylene (RHDPE) and polypropylene (RPP) were fabricated at different parts per hundred resin (phr) of DPLF. Maleic anhydride grafted polyethylene (MAPE) was used as compatibilizer to enhance the adhesion between filler and polymer matrix. The composites were prepared using melt extrusion and tests samples were produced via injection molding process. Thermal conductivity results showed that as much as 11 % reduction in thermal conductivity was achieved with the incorporation of 30 phr DPLF. Highest tensile strength was observed with the incorporation of 10 phr DPLF. The elongation at break was reduced with the addition of DPLF due to impediment of chain mobility by the fillers. Initial degradation temperature increased with the addition of DPLF. Hence, it is concluded that DPLF can be used to develop green and thermally insulating composites. It is hoped that the present results will stimulate further studies on the thermally insulative materials based on natural fibers reinforced polymer composites for applications in the building industries.     

Role of potassium permanganate and urea on the improvement of the mechanical properties of jute polypropylene composites

Jute fabrics (hessian cloth) reinforced polypropylene (PP) matrix composites (45 wt% fiber) were fabricated by compression molding. Jute fabrics were treated with 2-hydroxyethyl methacrylate (HEMA) using ultraviolet radiation in order to improve the mechanical properties of the composites. Concentration of HEMA, soaking time and radiation dose were optimized. It was found that 15% HEMA in methanol along with photoinitiator Darocur-1173 (2 %), 10 min soaking time and 20th pass of radiation rendered better performance. Urea of different concentrations (0.5–2 %) was incorporated with 15 % HEMA to monitor its effect on the properties and 1 % urea revealed the best results. For the improvement of the properties, jute fabrics were treated with potassium permanganate (KMnO₄) solution in acetone of different concentrations (0.02, 0.03, 0.05, and 0.5 %) at different soaking times (1, 2, 3, and 5 min) before the composite fabrication. Optimized jute fabrics (jute fabrics treated with 0.03 % KMnO₄) were again treated with HEMA (15 %) solution along with urea (1 %) and promising improvement of mechanical properties of the composites was observed. Scanning electron microscopy, water uptake, soil degradation and thermal aging of the treated and untreated composites were also performed.     

Determination of oil palm fresh fruit bunch ripeness—Based on flavonoids and anthocyanin content

Non-destructive and real-time oil palm fresh fruit bunch (FFB) grading systems are of major exploratory concern for researchers in the oil palm industry. The objective is to reduce time, labour, costs, and most importantly, to increase the oil extraction rate, in order to achieve a good quality of palm oil at a more acceptable price. This research investigates the potential of flavonoids and anthocyanins as a predictor to classify the degree of oil palm FFB ripeness. This paper also discusses the relationship between these predictors and the ripeness categories period. One hundred and eighty oil palm FFB samples were collected from a private plantation in Malaysia, according to three maturity categories i.e., ripe, under-ripe, and over-ripe. Each sample was randomly scanned 10 times, both front and back using a hand-held Multiplex^®3 multi-parameter fluorescence sensor. The results show that flavonoid and anthocyanin content decreased from immature to over mature oil palm FFBs. Overall, the relationship using Pearson's correlation between flavonoids and anthocyanins was r² = 0.84 and the most outstanding relationship accuracy was at the over-ripe stage, at 90%. Statistical analysis using analysis of variance (ANOVA) and pair-wise testing proved that both predictors gave significance difference between under-ripe, ripe, and over-ripe maturity categories. This shows that both predictors can be good indicators to classify oil palm FFB. Classification analysis was performed by using both predictors together and separately through several methods. The highest overall classification accuracy was 87.7% using a Stochastic Gradient Boosting Trees model and with both predictors. The other classification methods used either independent or both predictors together and gave various results ranging from 50 to 85% accuracy. This research proves that flavonoids and anthocyanins can be used as predictors of oil palm maturity classification.