Comparison of different rice flour- and wheat flour-based butter cookies for acrylamide formation

Acrylamide (AcA) contents of different rice flour- and wheat flour-based butter cookies baked at 130 °C for 20, 55, or 90 min were investigated. AcA contents of different flour-based cookies increased with baking time. Color parameters in terms of CIE L*, b*, C*, and ΔE values showed significant opposite correlation to the AcA formation in each of the raw flour cookie. The cookies based on white rice flour had the lowest AcA contents ranging from not detectable (ND) to 204 μg/kg, followed by cookies based on brown rice flour (ND to 450 μg/kg), white wheat flour (155 μg/kg to 661 μg/kg), and whole wheat flour (306 μg/kg to 982 μg/kg). Considerably lower AcA levels were found in the rice flour-based cookies than in the wheat flour-based cookies, as well as in the milled flour-based cookies than in the whole-grain cookies. Although the flour source was considered to play a primary role in determining the AcA content, AcA content was apparently not dependent on the quantities of reducing sugars and free asparagine in the starting raw flour and cookies during baking. In summary, given its reducing potential for AcA formation, rice flour could be used in the production of cookies safe from heat-induced contaminants.     

Moisture migration in a cereal composite food at high water activity: Effects of initial porosity and fat content

Water sorption isotherms and effective moisture diffusivities were determined at 20 °C for sponge cakes at high water activity as a function of their initial porosity, in the range 86 and 52% (0 g/g dry basis fat content), and of their fat content, ranging between 0 and 0.30 g/g dry basis (67% initial porosity). The equilibrium moisture values were not affected by food structure and decreased with increasing fat content. The effective moisture diffusivity decreased from 7.5 to 0.3×10⁻¹⁰ m²/s with increasing moisture content from 0.30 to 2.20 g/g dry basis. Decreasing initial porosity from 86 to 52% decreased effective moisture diffusivity by more than four orders of magnitude. This behaviour was related to differences of water transfer mechanisms, with the contribution from liquid water diffusion in the solid matrix and from vapour water diffusion in pores. Increasing fat content of 0.30 g/g dry basis in sponge cake, independently of porosity, decreased effective moisture diffusivity by more than five orders of magnitude. A predictive mathematical model was used to simulate moisture intake in two-composite food systems: sponge cakes with varying initial porosities and fat contents and an agar gel as a model of a non-rate limiting water source. Increasing the density of the structure or addition of fat in the cereal-based phase could increase shelf life of composite foods.     

Pretreatment of African Yam Bean (<Emphasis Type="Italic">Sphenostylis stenocarpa</Emphasis>): Effect of Soaking and Blanching on the Quality of African Yam Bean Seed

The effect of pretreatment (soaking in sodium salts and blanching) on hydration coefficient (HC), chemical composition, texture, and color of African yam bean (AYB) was investigated. Soaking in water and in salt solutions increased the HC and about 90% of final HC values were attained at 12 and 4 hr of soaking for whole and dehulled beans, respectively. Protein content was slightly increased by soaking and blanching while ash and fat contents were reduced. Generally, a combination of dehulling and wet-processing reduced firmness of the beans more than soaking or blanching of the whole beans. Antioxidant activity was lowest (3260 TE³100 g) in cream-colored beans and highest (16,600 TE/100 g) in brown-colored beans. The tannin contents of unprocessed cream-colored beans and dehulled wet-processed marble variety were not significantly different (p > 0.05). The levels of tannins in the marble variety were reduced by blanching for 40 min (19.2%), soaking for 12 hr (16.0%), dehulling (72.0%), dehulling and blanching (88.8%). The whiteness of bean flours was increased significantly by dehulling, slightly by wet-processing of marble variety, and reduced significantly by wet-processing of cream-colored beans. TE: micromole equivalents of Trolox (TE) per 100 g of a sample. L^∗ value value: determined by McBeth colorimeter (Minolta Co., Japan).     

Ultrasound-Assisted Water Extraction of Mastocarpus stellatus Carrageenan with Adequate Mechanical and Antiproliferative Properties

Ultrasound-assisted water extraction was optimized to recover gelling biopolymers and antioxidant compounds from Mastocarpus stellatus. A set of experiments following a Box–Behnken design was proposed to study the influence of extraction time, solid liquid ratio, and ultrasound amplitude on the yield, sulfate content, and thermo-rheological properties (viscoelasticity and gelling temperature) of the carrageenan fraction, as well as the composition (protein and phenolic content) and antiradical capacity of the soluble extracts. Operating at 80 °C and 80 kHz, the models predicted a compromise optimum extraction conditions at ~35 min, solid liquid ratio of ~2 g/100 g, and ultrasound amplitude of ~79%. Under these conditions, 40.3% carrageenan yield was attained and this product presented 46% sulfate and good mechanical properties, a viscoelastic modulus of 741.4 Pa, with the lowest gelling temperatures of 39.4 °C. The carrageenans also exhibited promising antiproliferative properties on selected human cancer cellular lines, A-549, A-2780, HeLa 229, and HT-29 with EC₅₀ under 51.9 μg/mL. The dried soluble extract contained 20.4 mg protein/g, 11.3 mg gallic acid eq/g, and the antiradical potency was equivalent to 59 mg Trolox/g.     

盐度对三角褐指藻生长及有机质积累的影响

以三角褐指藻为材料,探究盐度对该藻生长、总脂等有机质含量的影响,探讨有利于油脂生产的盐度条件。结果显示,盐度变化对三角褐指藻生物量和有机质积累均有显著影响。在盐度70‰的海水中培养的细胞,其比生长速率比正常海水盐度（35‰）培养组降低了22.6%。正常海水盐度下,生物量及总脂含量最高,分别达1.92g/L和29.98%,且总脂单位体积产量极显著（p＜0.01）地高于其他各组,藻油产量高达47.67mg•L-1•d-1。在盐度17‰时,多糖含量最高,达5.5%。在盐度70‰时,蛋白质含量最高,达17.82%。       

Thermomechanical Glass Transition of Extruded Cereal Melts

Cereal melts were produced via extrusion cooking using a twin-screw extruder at in-barrel moisture contents ranging from 25 to 42% (wb). Dynamic mechanical thermal analysis was performed to determine the plasticizing effect of water on the glass transition (T_g) for melts obtained from degermed corn meal, oat flour, pregelatinized corn starch and pregelatinized waxy maize. For degermed corn meal, T_gwas found to decrease with increasing water contents up to about 30% (wb). Above 30% moisture content, T_gwas found to be essentially constant and approximately equal to 270K. Thus, W_g′ was estimated to be 30% moisture content. For samples of moisture content less than W_g′, loss tangent vs. temperature plots in the glass transition region were observed to be broader and of smaller amplitude than those above W_g. Glass transitions ranged from 270 to 321K for sample moisture contents ranging from 36·3 to 22·2% (wb), respectively. For an oat flour, T_gvalues ranging from 270 to 303K were observed for moisture contents of 39·2 to 26·1% (wb), respectively. Melts formed from pregelatinized corn starch and pregelatinized waxy maize had glass transitions similar to corn meal at a similar moisture content of 27%. The significance of these results, in terms of extrusion cooking of cereals, is discussed in this work.     

The effect of water salinity on potatoes (Solanum tuberosum L.): Physiological indices and yielding capacity

Summary The response of several potato cultivars to salinity levels of 20.5, 34.2 and 51.3 mM NaCl was investigated. Salinity tended to lower the water and the osmotic potentials of leaves and tubers while increasing the content of total soluble solids and of proline; it also increased the content of dry matter in the tubers and reduced tuber yields. Susceptibility to salinity was described by the relative loss of tuber dry weight. ‘Blanka’ tolerated the lowest NaCl level (20.5 mM) and exhibited moderate tolerance to higher levels when exposed to salinity stress for 37 days.before harvest, but was susceptible when exposed to the higher levels for 63 days. Cv. Alpha showed moderate tolerance, loosing up to 15% of tuber dry weight when exposed to salinity levels of 20.5 and 34.2 mM NaCl. Mechnisms involved in the adaptation of potatoes to salinity stress are discussed. Contribution from the Agricultural Research Organization, The Volcani Center, Bet Dagan, Israel. No. 2206-E, 1987 series.     

Segregation of leptines and other glycoalkaloids inSolanum tuberosum (4x) ×S. chacoense (4x) crosses

A clone, 8380-1, selected fromSolanum chacoense (PI 458310) for its high foliage content of the leptine glycoalkaloids, a factor in resistance to Colorado potato beetle, was doubled in chromosome number from 2n=2x=24 to 2n=4x=48. Three 4x clones were crossed with sixS. tuberosum (4x) clones. Foliage glycoalkaloid contents were measured for 452 F1 hybrids from 15 crosses. The 4xchacoense parental clones were not different in respect to glycoalkaloid contents and were similar to the original 2x clone. All F1 hybrids synthesized foliage leptines ranging from 9 to 369 mg/100 g fresh weight (fw) with a mean content of 113 mg/100 g fw. The proportion of leptines in the total glycoalkaloid content ranged from 1% to 62% with a mean of 25%. The 4xchacoense parent mean leptine content was 1482 mg/ 100 g fw which was 90% of the total glycoalkaloid content. Tubers from 136 hybrids and the threechacoense parental clones were tested for glycoalkaloid contents. The tuber solanine + chaconine contents of the 136 hybrids ranged from 30 to 180 mg/100 g fw with a mean of 79. The mean tuber content of the threechacoense parental clones was 157 mg/100 g fw. Leptines were not found in any of the tubers.     

花生品质的影响因素研究Ⅰ.花生品种因素

研究证明，花生品种类型间和同一类型不同品种间以及同一品种不同成熟度的籽仁，其品质均存在显著差异。粗脂肪含量，最高58．7％，最低43．66％，粗蛋白质含量，最高34．75％，最低21．06％；油亚比（O／L），最高2．173，最低0．807；人体必需氨基酸含量，最高8.93g/100g.最低6.57g/100g；人体必需脂肪酸含量，最高40.68%,最低29．16％，总糖含量，最高6．78％，最低4．56％，VC含量，最高7.38mg/kg，最低2.42mg/kg；VB1含量，最高14.84mg/kg,最低7.96mg/kg;硒含量，最高0.086mg/kg，最低0.072mg/kg。说明影响花生品质首先是品种本身的遗传因子，通过正确运用育种手段可以选育出优质综合和优质专用型花生新品种。     

Evaluation of yield and chemical composition of a halophyte (Suaeda glauca) and its feeding value for lambs

Suaeda glauca is a potential feedstock for ruminants in north‐east China in areas of increasing salinity. The characteristics of S. glauca pasture from June to October and effects on intake, digestion and blood metabolites in lambs given increasing proportions of S. glauca in the forage component of a mixed hay/concentrate (50/50) diet were evaluated. Harvest date had a significant effect on dry matter (DM) yield. There were significant increases in DM content, total energy, neutral detergent fibre and acid detergent fibre (ADF), but declines in leaf proportion, crude protein, total ash and sodium contents with maturity. Inclusion of 25%S. glauca hay in a diet significantly improved daily intake of DM, organic matter (OM) and energy compared with T0% and T50% groups. Supplementation at 25 or 50% significantly increased the digestibility of energy, DM, OM and ADF compared with the T0% group. Water intake, urinary excretion, water content of fresh faeces and sodium excretion from urine linearly increased with increasing S. glauca content, but potassium excretion from urine decreased. K and Mg serum contents were significantly increased compared with T0% group when S. glauca made up 50% of diet. This study indicates that S. glauca is a suitable hay when added as 25% of the lamb diet.     

Impact of water content on the solubilisation of arabinoxylan during xylanase treatment of wheat bran

Arabinoxylan (AX) has a major impact on the functional properties of wheat bran, and it has been shown that technological properties of bran can be improved by using endoxylanases. Enzymatic treatments are typically conducted at high water content. However, in industrial applications, low water content may be advantageous, especially when targeting dry end products. The aim of the study was to examine the impact of water content, ranging from 20 to 90%, on the efficiency of endoxylanase treatment of wheat bran. Interestingly, AX solubilisation was highest at the water contents of 40 and 90%. At water contents 50–80%, AX solubilisation was lower than at 40 and 90%. Furthermore, at low water content, less depolymerisation was detected. At water content of 40%, the bran-water mixture was transformed from powder-like into compact mass. Probably the compact consistency of the material enhanced AX solubilisation by increased breakdown of bran cell walls due to shear forces or via enhanced enzyme binding to the substrate. The results show that solubilisation of bran AX can also be efficiently performed at low water content.     

Seasonal Variation of Phenolic Antioxidant-mediated α-glucosidase Inhibition of <Emphasis Type="Italic">Ascophyllum nodosum</Emphasis>

Ascophyllum nodosum is a brown seaweed that grows abundantly in the US Northeast coastal region. This study examined the seasonal variation of A. nodosum in phenolic contents and subsequent antioxidant, α-glucosidase and α-amylase inhibitory activities. A. nodosum was harvested monthly and extracted in hot water and the resulting extracts were spray-dried. The results indicate a clear seasonal variation in terms of phenolic content, with June and July being the highest (36.4 and 37 mg/g, respectively) and May the lowest (21.8 mg/g). The antioxidant activities, in terms of 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging activity, correlated with the phenolic contents observed (r = 0.81), with the month of July being the highest (58%) and April the lowest (26%). Similarly in terms of Trolox equivalent, July had the highest activity (15.53 μM) and April and May the lowest (8.40 and 8.27 μM, respectively). α-glucosidase inhibitory activity exhibited a pattern similar to the phenolic contents observed with July having the highest inhibitory activity (IC₇₀ 2.23 μg) and April the lowest (IC₇₀ 26.13 μg), resulting in an inverse correlation between IC₇₀ values and total phenolic content (r = −0.89). Such seasonal variation is believed to be caused by temperature-related stress considering that A. nodosum is a cold water species.     

Investigation of the land subsidence and its consequences of large groundwater withdrawal in Rafsanjan, Iran

Land subsidence is a phenomenon that involves the lowering or settling of the earth's surface due to various factors. The land subsidence due to groundwater withdrawal over the world has been seen in many areas. A decrease in ground water level would cause an increase in effective stresses at clay layers which results consolidation of lower layers. Since about 1980, it has been proven that Kerman Province subsidence in Iran is due to extensive ground water withdrawal. Overdraft of groundwater, an increasing of about 6 times since 1969 to 1999, has caused a decline of about 28 m in groundwater level. The rate of subsidence recently is about 5-15 cm. for decline of about one meter in groundwater level. In Rafsanjan area, many problems such as increase in the salinity of groundwater, land subsidence and consequently earth fissures and cracks in buildings are caused by groundwater withdrawal.     

Effect of temperature, time and wheat gluten moisture content on wheat gluten network formation during thermomolding

A plastic-like material can be obtained by thermomolding wheat gluten protein which consists of glutenin and gliadin. We studied the effect of molding temperature (130-170 °C), molding time (5-25 min) and initial wheat gluten moisture content (5.6-18.0%) on the gluten network. Almost no glutenins were extractable after thermomolding irrespective of the molding conditions. At the lowest molding temperature, the extractable gliadin content decreased with increasing molding times and moisture contents. This effect was more pronounced for the α- and γ-gliadins than for the ω-gliadins. Protein extractabilities under reducing conditions revealed that, at this molding temperature, the cross-linking was predominantly based on disulfide bonds. At higher molding temperatures, also non-disulfide bonds contributed to the gluten network. Decreasing cystine contents and increasing free sulfhydryl and dehydroalanine (DHA) contents with increasing molding temperatures and times revealed the occurrence of β-elimination reactions during thermomolding. Under the experimental conditions, the DHA derived cross-link lanthionine (LAN) was detected in all gluten samples thermomolded at 150 and 170 °C. LAN was also formed at 130 °C for gluten samples containing 18.0% moisture. Degradation was observed at 150 °C for samples thermomolded from gluten with 18.0% moisture content or thermomolded at 170 °C for all moisture contents.     

Effect of Cooking Procedures and Storage on Starch Bioavailability in Common Beans (<Emphasis Type="Italic">Phaseolus vulgaris</Emphasis> L.)

Common commercial beans were cooked using two procedures: under pressure (autoclaving) and traditional cooking. Total starch extraction was higher in beans cooked with the traditional procedure (41.69–42.81%) than in the autoclaved samples (37.04–38.16%) and did not change during storage at 4 °C. However, available and total resistant starch levels in vitro were not influenced by the cooking procedure or storage. Retrograded resistant starch content was higher in beans cooked with the traditional process (2.65–2.79%) than in autoclaved beans (1.62–1.94%). The initial in vitro -amylolysis rate in freshly cooked beans was higher in the autoclaved preparation than in the beans cooked by the traditional process, but final hydrolysis indices (90 min) were similar for both samples. None of the bean samples showed statistical differences in -amylolysis behavior (=0.05) after storage at 4 °C for 96 hour.     

Developmental changes in composition and quality of prickly pear cactus cladodes (nopalitos)

The composition and quality of edible tender stems or cladodes of 3 Prickly Pear Cactus species (Opuntia amyclaea, O. ficus-indica, and O. inermis) were studied at different stages of development. This traditional Mexican vegetable is called nopalitos in Spanish and cactus leaves in English. Cladodes harvested when 20 cm in length have the following average composition per 100 g: 91.7 g of water, 1.1 g of protein, 0.2 g of lipid, 1.3 g of ash, 1.1 g of crude fiber, 4.6 g of complex carbohydrates and 0.82 g of simple sugars, 12.7 mg of ascorbic acid and 28.9 µg of carotenes. The cladode's juice has an average pH of 4.6, 0.45% titratable acidity and 6.9% soluble solids. The components which varied most during development of the cladodes were: carotenes, acidity and total carbohydrates which increased, and protein and crude fiber (acid-detergent) which decreased. The nutritive value of the tender cladodes in the stages of growth at which they are commonly harvested and consumed (15 to 25 cm long weighing 50 to 80 g per stem), was similar for the 3 species.     

Chemical properties and water absorption kinetics of transgenic corn grain (2B587 Hx) and its conventional isoline (2B587)

In the hydration process, besides influencing processing conditions, the cultivar may also influence water absorption by the grains and, consequently, yield and quality of the milled products. Therefore, the moisture absorption kinetics of the transgenic corn grain 2B587 Hx and its conventional isoline 2B587 were studied, as well as the chemical characterization of the samples in natural conditions. The water absorption kinetics of the grains was modeled using Peleg's equation at hydration temperatures of 40, 50, 60, and 67 °C. The 2B587 Hx transgenic corn, compared with the 2B587 conventional corn, had higher carbohydrate and ash contents and lower crude fiber content. The water absorption by the grains, which was satisfactorily represented by Peleg's model, occurred more quickly as the temperature increased. Peleg's constant, k₁, which is inversely related to the initial hydration rate, varied from 405.2 to 141.5 min g/g for conventional corn and from 429.5 to 149.5 min g/g for transgenic corn at temperatures from 40 to 67 °C. The choice of the cultivar may depend on the specifications required by the industry for the main final products.     

Influence of Environmental Factors on the Paralytic Shellfish Toxin Content and Profile of Alexandrium catenella (Dinophyceae) Isolated from the Mediterranean Sea

Laboratory experiments were designed to study the toxin content and profile of the Alexandrium catenella strain ACT03 (isolated from Thau Lagoon, French Mediterranean) in response to abiotic environmental factors under nutrient-replete conditions. This dinoflagellate can produce various paralytic shellfish toxins with concentrations ranging from 2.9 to 50.3 fmol/cell. The toxin profile was characterized by carbamate toxins (GTX3, GTX4 and GTX5) and N-sulfocarbamoyl toxins (C1, C2, C3 and C4). C2 dominated at 12–18 °C, but only for salinities ranging from 10 to 25 psu, whereas GTX5 became dominant at temperatures ranging from 21 to 30 °C at almost all salinities. There was no significant variation in the cellular toxin amount from 18 °C to 27 °C for salinities ranging between 30 and 40 psu. At salinities of 10 to 25 psu, the toxin concentrations always remained below 20 fmol/cell. Toxin content was stable for irradiance ranging from 10 to 70 μmol photons/m²/s then slightly increased. Overall, the toxin profile was more stable than the toxin content (fmol/cell), except for temperature and/or salinity values different from those recorded during Alexandrium blooms in Thau Lagoon.     

Phenolics and Antioxidative Activities in Narrow-Leafed Lupins (Lupinus angustifolius L.)

Eight lupin (Lupinus angustifolius L.) genotypes grown at four locations in south central Alberta in 2004 were evaluated for variability in phenolic constituents and antioxidant activity measured by a photochemiluminescence assay. Genotype was the main source of variation for content of phenolic compounds and antioxidant activities. Phenolic compounds in genotypes varied minimally from 11.9 to 14.7 mg catechin equivalent and 4.15 to 4.95 mg rutin equivalent g⁻¹ lupin for total phenolic and flavonoid contents, respectively. Lupin genotypes exhibited weak antioxidant activity based on water–soluble substances (ACW) of 0.54 to 1.07 μmole Trolox equivalent antioxidant capacities (TEAC)/g with lag time ranging from 70 to 153 s and an antioxidant index of 6.7 to 14.5 and 1.9 to 3.3 μmole TEAC/g based on measurements of lipid-soluble substances (ACL). Antioxidant activity of lupin genotypes was not related to phenolic contents of seeds.     

花生籽仁黄酮含量遗传模式分析

黄酮是花生种子中重要的功能性成份,明确花生籽仁黄酮含量的遗传模式,为培育高黄酮花生品种奠定基础。本研究以花育22号和P76为亲本构建的重组自交系群体为材料,鉴定其种子黄酮含量,结果表明,亲本花育22号及P76的黄酮含量分别为19μg RTE/g FW、70μg RTE/g FW,群体花生种子黄酮含量在4~181μg RTE/g FW之间。采用植物数量性状分离分析软件分析其遗传模式,结果表明花生种子黄酮含量受四对主基因控制,主基因遗传力为98.48%,具有加性效应,加性效应值在-46.7535~234.6343之间,基因之间具有互作效应,三对基因间的互作可提高花生籽仁黄酮含量。