Partial carpal and pancarpal arthrodesis in the dog: a review of 50 cases

Fifty-six carpal arthrodeses were carried out in 50 dogs. Six of these had bilateral arthrodeses. A dynamic compression plate (DCP; Straumann Great Britain Ltd), placed on the dorsal aspect of the carpus, was used for fixation in all cases. The main indication for pancarpal arthrodesis was a hyperextension injury of the radiocarpal joint. Forty-three pancarpal arthrodeses were performed in 40 dogs (a bilateral procedure was performed in three). Hyperextension injuries of the intercarpal and carpometacarpal joints were treated by partial carpal arthrodesis in 10 dogs; three of these had bilateral procedures. Seventy-four per cent of dogs treated by pancarpal arthrodesis regained full limb function. Only 50 per cent of cases treated by partial carpal arthrodesis had a similar result.     

Antebrachial metacarpal arthrodesis for fusion of deranged carpal joints in two dogs

Congenital malformation of the carpal joint in a young dog resulted in a progressive lameness. Traumatic disruption of the carpus in another dog resulted in carpal bone necrosis, infection, and chronic instability. Radial metacarpal arthrodesis was performed in both dogs. The diseased carpal bones were excised, sparing the accessory carpal bone in both dogs. Radial metacarpal arthrodeses were then performed, using bone plate fixation. In the dog with the malformed limb, the gait had improved, but intermittent lameness was still present 8 months later because of an associated malarticulation of the cubital joint. The dog with the traumatized carpus had little or no lameness associated with normal activity for 32 months.     

Carpal arthrodesis using a minimally invasive approach and locking compression plates: Three cases

Three horses with carpal instability due to comminuted second carpal bone fractures (Cases 1 and 3), fracture of the head of the second metacarpal bone (Case 1) or comminuted fractures of the fourth carpal bone, ulnar and intermediate carpal bones (Case 2) were treated by minimally invasive approach for partial (Cases 1 and 3) or pancarpal (Case 2) joint arthrodesis, using locking compression plates. The joint cartilage was removed by either an arthroscopic approach (middle carpal joint and antebrachiocarpal joint) or a percutaneous drilling technique (carpometacarpal joint). Two or 3 locking compression plates were contoured to the dorsolateral, dorsomedial and dorsoaxial aspects of the carpal joints using a custom‐made tunnelling tool and a minimally invasive tunnelling technique, and the screws were positioned through stab incisions. All cases recovered well, were lame free at the walk, were able to trot and gallop and could be used for leisure and pasture activities (partial carpal arthrodesis) and breeding (pancarpal arthrodesis). Post‐operative x‐rays showed progressive joint fusion after 12 months (Case 1), 5 months (Case 2) and 10 months (Case 3). Case 2 with a pancarpal arthrodesis showed a mechanical lameness at the walk due to the inability to flex the carpus. Carpal flexion after carpometacarpal and middle carpal arthrodesis in Case 1 was calculated to be 42.6° and 44° in Case 3.     

Diagnosis and treatment of carpometacarpal desmopathy in a horse

A 9‐year‐old Warmblood gelding underwent magnetic resonance (MR) imaging of the carpal and proximal metacarpal regions for evaluation of prolonged right forelimb lameness. Magnetic resonance findings were indicative of desmopathy of the right lateral carpometacarpal ligament and the interosseous ligament between the third and fourth metacarpal bones. Based on the MR findings and lack of response to conservative therapy, surgery using a drilling technique was performed to facilitate fusion of the right carpometacarpal joint. After surgery and a 6‐month rest and rehabilitation programme, the horse returned to soundness. This case report describes a unique combination of lateral carpal/proximal metacarpal soft tissue injuries that resulted in prolonged lameness and were treated with facilitated arthrodesis of the carpometacarpal joint. These soft tissue injuries should be considered as a differential diagnosis in horses with lameness localised to the proximal metacarpal/distal carpal region.     

Disorders of the carpus in the dog I

The term carpus (Greek: karpos = wrist) refers to the region between the forearm and metacarpus, and designates the compound joint comprising the carpal bones and associated sesamoids. Consideration of the gross and radiographic anatomy of the carpus would, for clinical purposes, be incomplete without the inclusion of the distal extremities of the radius and ulna, and of the bases of the metacarpal bones, because these form an integral part of the joint's construction.     

Magnetic resonance imaging findings in the carpus and proximal metacarpal region of 50 lame horses

Reasons for performing study: There is limited information on magnetic resonance imaging (MRI) findings in the carpus and proximal metacarpal region of lame horses. Objectives: To document MRI findings in horses with lameness localised to the carpus and/or proximal metacarpal region. Methods: Clinical records of horses that underwent MRI of the carpus and/or proximal metacarpal region at the Animal Health Trust between January 2003 and September 2010 were reviewed. Magnetic resonance images of all horses and available radiographs, ultrasonographic and scintigraphic images were assessed. When possible, MRI findings were related to the results of other diagnostic imaging techniques. Results: Seventy‐two MR studies of 58 lame limbs in 50 horses from a broad range of work disciplines and ages were reviewed. The most commonly detected primary abnormality was decreased signal intensity in T1‐ and T2‐weighted images in the medial aspect of the carpal bones and/or the proximomedial aspect of the metacarpal bones (n = 29). Nine horses had syndesmopathy between the second and third metacarpal bones. In 6 horses the primary abnormalities were identified in the palmar cortex of the third metacarpal bone (McIII). Significant abnormalities of the suspensory ligament (SL) with associated lesions in the adjacent palmar cortex of the McIII were seen in 4 limbs. Ligament and associated osseous abnormalities between the second and third carpal bones and second and third metacarpal bones were detected in 4 limbs. Conclusions and potential relevance: Magnetic resonance imaging enabled diagnosis of a variety of lesions not detected by conventional imaging in horses from a wide range of work disciplines. The distribution of injury types differed considerably from previous studies.     

Metacarpal fractures associated with pancarpal arthrodesis in dogs

OBJECTIVE: To report the prevalence of third metacarpal bone fractures after dorsal plating for pancarpal arthrodeses in dogs and to identify predisposing factors. STUDY DESIGN: Retrospective clinical study. ANIMALS: Fifty-four client-owned dogs. METHODS: Pancarpal arthrodesis was performed using dorsally applied 2.7- or 3.5-mm bone plates. Medical records and radiographs were retrospectively evaluated to identify those dogs with metacarpal bone fractures after pancarpal arthrodesis and to determine the angle of arthrodesis, the percentage of the third metacarpal bone covered by the bone plate, and the percentage width of the bone occupied by the screw. Radiological evidence of arthrodesis at follow-up examination 6 weeks postoperatively was recorded. Long-term results were obtained by telephone follow-up with the owners. All lame dogs were evaluated clinically and radiographically. RESULTS: Metacarpal fractures occurred in 6 of 54 dogs. One of these dogs had a stress fracture of the third metacarpal 10 months after implant removal and was not included in the statistical analysis. Fractures occurred through the distal screw hole in four dogs and involved two metacarpal bones (III and IV) in two dogs. The median ratio of bone screw diameter-to-metacarpal bone diameter was the same for dogs with metacarpal bone fractures and those with no fractures (44%), and the median angles of arthrodesis were 8 degrees and 7 degrees. These values were not statistically significant. The percentage length of the metacarpal bone covered by the plate was 53% (no fracture) compared with 46% (fracture), and this difference was statistically significant (P = .035). CONCLUSIONS: Screw diameter was not implicated as a predisposing factor for metacarpal bone fracture in dogs undergoing pancarpal arthrodesis using a dorsally applied dynamic compression plate. The length of the metacarpal bone covered by the bone plate did affect the frequency of metacarpal fracture, with fewer fractures occurring when greater than 53% of the bone length was covered by the dynamic compression plate. CLINICAL RELEVANCE: When performing pancarpal arthrodesis with a dorsally applied bone plate, it is recommended that at least 50% of the length of the third metacarpal bone should be covered by the plate.     

CARPAL ARTHRODESIS IN DOGS

SUMMARY Nine dogs, each with a severe carpal sprain injury, were treated by arthrodesis (2 bilateral). The same surgical technique with articular cartilage curettage, autologous bone grafting and compression plate fixation was used for each carpus. Initial treatment with external coaptation had been unsuccessful, but arthrodesis always resulted in resolution of the lameness. Complications included fracture of the compression plate (1 case) and loosening of the implants (2 cases).     

In vitro biomechanical comparison of dynamic compression plates with a rough contact surface and a polished contact surface for fixation of osteotomized equine third metacarpal bones

Objectives: To compare the number of cycles to failure of 4.5 mm broad dynamic compression plates (DCP), 4.5 mm broad limited‐contact dynamic compression plates (4.5‐LC‐DCP), and 5.5 mm broad limited‐contact dynamic compression plates (5.5‐LC‐DCP) having a rough (denoted by a prefix R‐) versus a standard smooth contact surface for the fixation of osteotomized equine 3rd metacarpal (MC3) bones. Study Design: Experimental. Animal Population: Fifteen pairs of adult equine cadaveric MC3 bones. Methods: Fifteen pairs of equine MC3 were divided into 3 test groups (5 pairs each) for comparison of (1) R‐DCP fixation with DCP fixation, (2) R‐4.5‐LC‐DCP fixation with 4.5‐LC‐DCP fixation, and (3) R‐5.5‐LC‐DCP fixation with 5.5‐LC‐DCP fixation to repair osteotomized equine MC3 bones under palmarodorsal 4‐point bending cyclic fatigue testing. For each group an 8‐hole plate with rough contact surface was applied to the dorsal surface of one randomly selected bone from each pair and a corresponding 8‐hole plate with smooth contact surface was applied dorsally to the contralateral bone from each pair. All plates and screws were applied using standard ASIF techniques. All MC3 bones had mid‐diaphyseal osteotomies. Mean number of cycles to failure for each method were compared using a paired t‐test within each group. Significance was set at P<.05. Results: Mean cycles to failure ± standard deviation was significantly greater for the R‐DCP fixation (230,025 ± 23,129) compared with the DCP fixation (103,451 ± 14,556), for the R‐4.5‐LC‐DCP fixation (99,237 ± 14,390) compared with the 4.5‐LC‐DCP fixation (46,464 ± 6325) and for the R‐5.5‐LC‐DCP fixation (65,113 ± 7796) compared with the 5.5‐LC‐DCP fixation (34,224 ± 3835). Conclusion: For the fixation of osteotomized MC3 bones, the constructs with plates having rough contact surface were superior to the corresponding constructs with plates having standard smooth contact surfaces in resisting cyclic fatigue under palmarodorsal 4‐point bending.     

An in vitro biomechanical comparison of a prototype equine metacarpal dynamic compression plate fixation with double dynamic compression plate fixation of osteotomized equine third metacarpal bones

OBJECTIVES: To compare the monotonic biomechanical properties of a prototype equine third metacarpal dynamic compression plate (EM-DCP) fixation with a double broad dynamic compression plate (DCP) fixation to repair osteotomized equine third metacarpal (MC3) bones. STUDY DESIGN: In vitro biomechanical testing of paired cadaveric equine MC3 with a mid-diaphyseal osteotomy, stabilized by 1 of 2 methods for fracture fixation. POPULATION: Twelve pairs of adult equine cadaveric MC3 bones. METHODS: Twelve pairs of equine MC3 were divided into 3 test groups (4 pairs each) for (1) 4-point bending single cycle to failure testing, (2) 4-point bending cyclic fatigue testing, and (3) torsional testing. The EM-DCP (10-hole, 4.5 mm) was applied to the dorsal surface of one randomly selected bone from each pair. Two DCPs, 1 dorsally (10-hole, 4.5 mm broad) and 1 laterally (9-hole, 4.5 mm broad) were applied to the contralateral bone from each pair. All plates and screws were applied using standard AO/ASIF techniques to MC3 bones that had mid-diaphyseal osteotomies. Mean test variable values for each method were compared using a paired t-test within each group. Significance was set at P<.05. RESULTS: Mean 4-point bending yield load, yield bending moment, bending composite rigidity, failure load and failure bending moment of the EM-DCP fixation were significantly greater (P<.0001) than those of the double broad DCP fixation. Mean cycles to failure in 4-point bending of the EM-DCP fixation was significantly greater (P<.0008) than that of the double broad DCP fixation. Mean yield load, composite rigidity, and failure load in torsion of the EM-DCP fixation were significantly greater (P<.0035) than that of the double broad DCP fixation. CONCLUSION: The EM-DCP provides increased stability in both static overload testing and cyclic fatigue testing. CLINICAL RELEVANCE: Results of this in vitro study support the conclusion that the prototype EM-DCP fixation is biomechanically superior to the double broad DCP fixation for the stabilization of osteotomized equine MC3.     

An in vitro biomechanical comparison of a limited-contact dynamic compression plate fixation with a dynamic compression plate fixation of osteotomized equine third metacarpal bones

OBJECTIVES: To compare the monotonic biomechanical properties and fatigue life of a broad, limited contact, dynamic compression plate (LC-DCP) fixation with a broad, dynamic compression plate (DCP) fixation to repair osteotomized equine 3rd metacarpal (MC3) bones. STUDY DESIGN: In vitro biomechanical testing of paired cadaveric equine MC3 with a mid-diaphyseal osteotomy, stabilized by 1 of 2 methods for fracture fixation. ANIMAL POPULATION: Twelve pairs of adult equine cadaveric MC3 bones. METHODS: Twelve pairs of equine MC3 were divided into 3 test groups (4 pairs each) for (1) 4-point bending single cycle to failure testing, (2) 4-point bending cyclic fatigue testing, and (3) torsional single cycle to failure testing. An LC-DCP (8-hole, 4.5 mm) was applied to the dorsal surface of 1 randomly selected bone from each pair. One DCP (8-hole, 4.5 mm broad) was applied dorsally to the contralateral bone from each pair. All plates and screws were applied using standard AO/ASIF techniques to MC3 bones that had mid-diaphyseal osteotomies. Mean test variable values for each method were compared using a paired t-test within each group. Significance was set at P<.05. RESULTS: The mean 4-point bending yield load, yield bending moment, composite rigidity, failure load, and failure bending moment of LC-DCP fixation were significantly greater (P<.01) than those of broad DCP fixation. Mean cycles to failure for 4-point bending was significantly (P<.001) greater for broad DCP fixation compared with broad LC-DCP fixation. Mean yield load, mean composite rigidity, and mean failure load in torsion was significantly (P<.02) greater for broad LC-DCP fixation compared with broad DCP fixation. CONCLUSION: Broad LC-DCP offers increased stability in static overload testing, however, it offers significantly less stability in cyclic fatigue testing. CLINICAL RELEVANCE: The clinical relevance of the cyclic fatigue data supports the conclusion that the broad DCP fixation is biomechanically superior to the broad LC-DCP fixation in osteotomized equine MC3 bones despite the results of the static overload testing.     

Severe carpal and tarsal shearing injuries treated with an immediate arthrodesis in seven dogs

The medical records of seven dogs with severe, grade 3, open shearing wounds of the carpus or tarsus that were treated with an immediate arthrodesis were reviewed. Six dogs were managed with a transarticular external skeletal fixator (ESF), and one dog was treated with plate fixation. The soft tissues were managed simultaneously along with the definitive joint stabilization in all cases. Minor complications occurred in four dogs: one dog that required a skin graft, one dog in which a skin graft was recommended but not performed, one dog in which a secondary skin closure was performed, and one dog in which a delayed cancellous bone graft was placed. Major complications occurred in three dogs: two dogs that required restabilization of the arthrodesis and one dog that required implant (i.e., plate) removal due to infection. All dogs healed with acceptable functional and cosmetic results. Further long-term evaluation of five dogs revealed that all but one dog had either excellent or good functional outcomes, and the remaining dog had a fair outcome. Similarly, five dogs had either excellent or good cosmetic outcomes, with the remaining dog having a fair outcome. All owners were very satisfied with the overall results. This clinical study demonstrated that an immediate, definitive management technique, in which bone fusion and wound management are undertaken as simultaneous objectives, is a viable technique of managing severe periarticular shearing injuries. Transarticular stabilization with an ESF is the technique recommended.     

Partial Carpal Arthrodesis for Third Degree Carpal Sprains: A Review of 45 Carpi

The efficacy of partial carpal arthrodesis was evaluated retrospectively in 39 dogs (45 carpi) with severe sprains of the middle carpal joints, the carpometacarpal joints, or both. The carpometacarpal joint was the most frequently injured joint. Jumping or falling from heights was the cause of injury in 49% of these animals. Of the 25 owners who responded to a mailed questionnaire (mean follow-up, 32 months), all stated their animal had improved or greatly improved after partial carpal arthrodesis and all were pleased or very pleased with the final surgical result. Hyperextension persisted in 11% of the cases and degenerative joint disease of the antebrachiocarpal joint was present in 15.5% of the cases. No dogs with partial carpal arthrodesis required panarthrodesis at a later date.     

Unusual Polydactylism in a Foal: A Case Report

A 2 month old quarter horse colt had multiple skeletal abnormalities of the left fore limb, including two supernumerary metacarpal bones, two supernumerary carpal bones, abnormal carpal bone development, and a valgus deformity originating at the carpal joint. The largest supernumerary metacarpal bone was removed completely, a portion of the smaller supernumerary metacarpal bone was removed, and the leg was placed in a tube cast. Surgical treatment improved the clinical appearance and prevented further injury to the limb. The carpal joint width remained increased but the carpal valgus deformity partially responded to hemicircumferential periosteal transection. The foal was sound 2 1/2 years after surgery.     

MAGNETIC RESONANCE ANATOMY OF THE CARPUS OF THE HORSE DESCRIBED FROM IMAGES ACQUIRED FROM LOW‐FIELD AND HIGH‐FIELD MAGNETS

Cadaver carpi of 30 mature horses with no history of carpal or proximal metacarpal pain were examined using low‐field (0.27 T) and high‐field (1.5 T) magnetic resonance imaging (MRI). Normal MRI anatomy in transverse, sagittal, and dorsal plane images was determined by comparison with anatomical specimens and standard texts. Subchondral bone and cortical bone thickness measurements were obtained from standardised sites. There was variable subchondral bone thickness in the radius and carpal bones; subchondral bone thickness was consistently larger at dorsal compared with palmar sites in the proximal row of carpal bones. The endosteal surface of the subchondral bone was smooth. The shape of the ulnar carpal bone was variable and one or more small osseous fragments were identified palmar to the bone in 5/30 limbs. There was no evidence to suggest that these were pathological fractures or avulsions of the lateral palmar intercarpal ligament. The amount of muscle tissue in the superficial and deep digital flexor tendons in the proximal aspect of the carpus varied, but none was present at the level of the middle carpal joint and distally. Several structures could be evaluated that cannot be imaged using radiography, ultrasonography, or arthroscopy, including the transverse intercarpal ligaments, the radiocarpal ligament, the short palmar carpal ligaments, and the carpometacarpal ligaments. Anatomical variations not previously described were identified, including the layers of the medial aspect of the carpal fascia. Knowledge of the variation in MRI appearance of the carpus of nonlame horses is helpful for interpretation of MR images of lame horses.     

Diffusion of contrast medium after four different techniques for analgesia of the proximal metacarpal region: an in vivo and in vitro study

Reasons for performing study: There is limited information on potential diffusion of local anaesthetic solution after various diagnostic analgesic techniques of the proximal metacarpal region. Objective: To document potential distribution of local anaesthetic solution following 4 techniques used for diagnostic analgesia of the proximal metacarpal region. Methods: Radiodense contrast medium was injected around the lateral palmar or medial and lateral palmar metacarpal nerves in 8 mature horses, using 4 different techniques. Radiographs were obtained 0, 10 and 20 min after injection and were analysed subjectively. A mixture of radiodense contrast medium and methylene blue was injected into 4 cadaver limbs; the location of the contrast medium and dye was determined by radiography and dissection. Results: Following perineural injection of the palmar metacarpal nerves, most of the contrast medium was distributed in an elongated pattern axial to the second and fourth metacarpal bones. The carpometacarpal joint was inadvertently penetrated in 4/8 limbs after injections of the palmar metacarpal nerves from medial and lateral approaches, and in 1/8 limbs when both injections were performed from the lateral approach. Following perineural injection of the lateral palmar nerve using a lateral approach, the contrast medium was diffusely distributed in all but one limb, in which the carpal sheath was inadvertently penetrated. In 5/8 limbs, following perineural injection of the lateral palmar nerve using a medial approach, the contrast medium diffused proximally to the distal third of the antebrachium. Conclusions and potential relevance: Inadvertent penetration of the carpometacarpal joint is common after perineural injection of the palmar metacarpal nerves, but less so if both palmar metacarpal nerves are injected using a lateral approach. Following injection of the lateral palmar nerve using a medial approach, the entire palmar aspect of the carpus may be desensitised.     

In vitro biomechanical comparison of locking compression plate fixation and limited-contact dynamic compression plate fixation of osteotomized equine third metacarpal bones

Objective— To compare monotonic biomechanical properties and fatigue life of a broad locking compression plate (LCP) fixation with a broad limited contact dynamic compression plate (LC‐DCP) fixation to repair osteotomized equine third metacarpal (MC3) bones. Study Design— In vitro biomechanical testing of paired cadaveric equine MC3 with a mid‐diaphyseal osteotomy, stabilized by 1 of 2 methods for fracture fixation. Animal Population— Cadaveric adult equine MC3 bones (n=12 pairs). Methods— MC3 were divided into 3 groups (4 pairs each) for: (1) 4‐point bending single cycle to failure testing; (2) 4‐point bending cyclic fatigue testing; and (3) torsional single cycle to failure testing. The 8‐hole, 4.5 mm LCP was applied to the dorsal surface of 1 randomly selected bone from each pair. One 8‐hole, 4.5 mm LC‐DCP) was applied dorsally to the contralateral bone from each pair. All plates and screws were applied using standard ASIF techniques. All MC3 bones had mid‐diaphyseal osteotomies. Mean test variable values for each method were compared using a paired t‐test within each group. Significance was set at P<.05. Results— Mean yield load, yield bending moment, composite rigidity, failure load and failure bending moment, under 4‐point bending, single cycle to failure, of the LCP fixation were significantly greater than those of the LC‐DCP fixation. Mean cycles to failure for 4‐point bending was significantly greater for the LCP fixation compared with LC‐DCP fixation. Mean yield load, mean composite rigidity, and mean failure load under torsional testing, single cycle to failure was significantly greater for the broad LCP fixation compared with the LC‐DCP fixation. Conclusion— The 4.5 mm LCP was superior to the 4.5 mm LC‐DCP in resisting the static overload forces (palmarodorsal 4‐point bending and torsional) and in resisting cyclic fatigue under palmarodorsal 4‐point bending. Clinical Relevance— The results of this in vitro study may provide information to aid in the selection of a biological plate for the repair of equine long bone fractures.     

Polymelia with two extra forelimbs at the right scapular region in a male Korean native calf.

In a male Korean native calf 14 days of age, polymelia (notomelia) was observed macroscopically and radiographically. External features included two normal forelimbs, two normal hindlimbs and two undeveloped extra forelimbs. The extra forelimbs were attached to the caudal regions of the right scapula and devoid of muscular tissues. In the extra forelimbs, a scapula-like bone formed a joint with the incompletely duplicated humerus. The humerus fused with the incompletely duplicated radius. The ulna, carpal bones, metacarpal bones and phalanges were completely duplicated. But one set of the duplicated carpal bones consisted of five bones: radial, accessory, fourth carpal, fused second and third carpal, and fused ulnar and intermediate carpal bones. The hoof and the rudimentary hoof of accessory digit were duplicated.