共查询到20条相似文献,搜索用时 578 毫秒
1.
Based on the elastic theory, an analysis can be made on stress and plastic deformation under tunnel excavation and shotcrete support.FLAC 3D can be used to simulate the mechanical behavior of excavation and support, getting the deformation of surrounding rock stress and plastic without support and shotcrete. The results show that, the prestress applied on the anchor equals to the supporting force when the tunnel plastic zone disappears. This support improves the self bearing capacity of surrounding rock, effectively suppresses the expansion of the plastic zone after the tunnel excavation, and prevents further damage to the tunnel surrounding rock. 相似文献
2.
Creep characters of tunnel supports structure is analyzed according to triaxial creep test of concrete specimen of deep tunnel supports structure adopting MTS815 hydraulic servo system. The creep parameters of nonlinear creep model are presented based oncreep curve. The finite element numerical model has been established considering tunnel construction process, creep characters of surrounding rock and support structure. The displacement characteristics, the effective stress and the maximum shear stress in different position in primary support and second lining are obtained through creep characters analysis of surrounding rock and supports structure. The features of displacement and stress dependent time of tunnel supports has visible difference comparing with discard creep effect and calculation displacement and practical monitoring results is basic concordance. The creep characters of surrounding rock and tunnel supports should be considered for deep tunnel. 相似文献
3.
Field test and deformation controlling for single tunneling lining stability 总被引:1,自引:0,他引:1
下载免费PDF全文
![点击此处可从《保鲜与加工》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The construction process of anchor,fiber concrete and its mechanical principle of interaction with surrounding rocks is studied by field tests from the view of researching stability of single layer tunneling lining. The mechanical properties of single layer lining in the practical application of tunnel engineering are measured. On the basis of this study,the mechanism of single layer tunnel lining is discussed,which is finally applied to the engineering practice,formatting a set of theoretical support for the design method of single layer lining. Studies found that close effect between fiber reinforced concrete and rock is well,which shows that the single layer lining design method to ensure quality and safety proposed in this paper is feasible,and construction characteristic of retaining structure is reliable. The method can be widely applied in engineering practice,and has remarkable economic benefit and social benefit. 相似文献
4.
Zhu Jinmin Wang Liwei 《保鲜与加工》1991,(1)
Combined with thedesign precept of Cai-Yuan highway tunnel 2 in Chongqing,stress state,time ffectiveness and rupture mechanism of rock near the bounda-ries of the tunnel and the second lining in jointed rock mass arc studied with model tests.The results show that shotcretc-bolt support betters mechanical properties of the periphey rock of the tunnel,and increases the capacity of anti-deformation.The second lining also has the action of supporting structure. 相似文献
5.
Excavation of an intersection tunnel between independent double tunnels leads again to stress release and redistribution in the surrounding rock and the support structure of the chief tunnel, resulting in change of mechanical behavior of the rock mass an 相似文献
6.
In process of the tunnel construction throw New Austrian Tunnelling Method, the result of smoothwall blasting to rock tunnel is not good, there are more and more cavities produced behind the lining. On the basis of engineering project, this paper makes the three-dimensional elastic-plastic analysis throw numerical simulation, discusses the stress-strain behavior of primary support when there is a different size of rectangle cavity behind the lining. In addition the safety factor of tunnel is calculated with cavity based on the strength reduction finit element method. This factor is compared with the factor of health tunnel. The stability of tunnel structure system is estimated through the linear regression analysis between stress of lining and safety factor. 相似文献
7.
8.
According to the strain nonlinear softening constitutive model having inflexion point after peak stress of practical rock and considering intermediate principal stress, the plastic zone of circular cavern with liner under the condition of uniform pressure is analyzed. The elasto - plastic boundaries both for the lining and surrounding rock are discussed. The stress distribution law is different due to the different position of elastic - plastic boundary. Based on this, different stress formulas are gained. The critical pressure caused by excavation of cavern leading to the yield zone and that caused by inner pressure leading to the yield of the liner and surrounding rock is introduced. 相似文献
9.
According to the measurement during excavation of Jinzhou tunnel with four lanes in one cave which lies on the rebuilt highway from Shenyang to Dalian, this paper analyzes the rock deformation rule, discusses the reason of instability after a highway tunnel was excavated, emphasizes the necessity of the construction stability monitor and active control. The importance of support is Fresented with bolts and shotcrete to improve and enhance the carrying capability of the rock. It is necessary to insist on the rule of measurement and active control to ensure the safety and quality of tunnel construction. 相似文献
10.
Based on dynamic time history analysis, dynamic response behavior of an un supported tunnel through fault zone which was simulated by interface and solid elements was studied under uniform input earthquake wave excitation. The analyses of response behaviors, including displacement difference, acceleration magnification, and plastic zones and so on, were carried out when earthquake wave excitation was input along transverse, longitudinal and vertical of tunnel respectively. The results show that simulation method for fault zone is effective; the earthquake causes obvious displacement difference at fault zone and surrounding rock contacting part. The maximal displacement difference reaches to 51.8mm under transverse uniform input earthquake wave excitation. And the displacement difference under vertical and longitudinal is only 44.3% and 23.1% of the transverse value, respectively; the acceleration magnification in fault zone is significantly greater than that in surrounding rock. Shear failure zone appears at the fault zone and surrounding rock contacting part, and it is especially prominent under input longitudinal earthquake wave excitation. It is proposed that fault zone has significantly influence on the dynamic performance of tunnel. The fault zone and the transitional zones are the control zones of seismic design when tunnel passes through fault zone, thus, the study on the anti seismic measures should be further strengthened. 相似文献
11.
Tunnel portal section mostly faces unfavorable geologic and topographical conditions, such as broken surrounding rock, shallow and unsymmetrical loadings. The current Chinese code for design of road tunnel provides the load calculation method of tunnel under unsymmetrical. However, according to the mechanic and deformation characteristics of the tunnel lining on site, the assumption is not suitable for the shallow tunnel under unsymmetrical loadings in broken surrounding rock. Therefore, through engineering case analysis and results of three-dimensional numerical analysis, the failure mechanism of shallow tunnel under unsymmetrical loadings in broken surrounding rock is presented firstly, that is, deep buried side broken surrounding rocks slump down after excavation and squeeze the lining, which makes the lining deform outward and bear passive earth pressure. Through the failure mechanism, the surrounding rock mainly includes slumping area and passive area. Then the corresponding formulas are deduced based on limit equilibrium theory. Finally, a case study is adopted to verify the feasibility of the new method. It is show that the new method is more reasonable than the method of current code. 相似文献
12.
According to the characteristics of plane strain problem of elastic and plastic mechanics, the bi parametric expressions were derived for stress components satisfying the generalized Hoek Brown failure criterion. Being substituted into the static equilibrium partial differential equations, a group of first order hyperbolic pseudo linear differential equation partial differential equations was obtained. Utilizing the determinant method and proper variable transformation, the characteristic direction and the differential relation equation for the stress partial differential equations were acquired. The characteristic direction indicted that in plastic zone obliquely intersecting conjugate shear slip surfaces formed two families of non orthogonal slip lines, in which conjugate angle varied with the limit stress state and the material physical properties of Hoek Brown rock mass. Since the principal direction of the maximum principal stress was circumferential in perfectly elasto plastic surrounding rock of the plastic zone around a circular opening suffering the symmetric initial stress field, the angle between the tangential direction of slip line with the principal direction of the maximum principal stress was the function of the minimum principal stress(i.e. the radial stress). Combined with the analytical solution, the polar coordinate differential equation was derived and furthermore, the polar coordinate curve equation for the slip line was obtained. 相似文献
13.
Elastic-Perfectly Plastic Solution of Tunnel Surrounding Rocks Using Mogi-Coulomb Strength Criterion
Lyu Caizhong 《保鲜与加工》2014,(6):54-59
Reasonable choice of rock strength criteria is crucial for stress and displacement prediction and support design in tunnel engineering. Based on Mogi-Coulomb strength criterion and elastic-perfectly plastic model, analytical solutions of stress and displacement for surrounding rocks around a circular tunnel were derived The intermediate principal stress coefficient was used to present the intermediate principal stress effect. The results in this study were compared with the current solutions in the literatures and the influence of intermediate principal stress and shear strength parameters of surrounding rocks was discussed. The results showed extensive applicability and the Mohr-Coulomb strength criterion and Matsuoka-Nakai criterion are two special cases; when the intermediate principal stress coefficient b was equals to 0.5, the results indicated that the intermediate principal stress effect and its range for rock strength; the influence of cohesion and internal friction angle on the plastic radius and tunnel wall displacement was significant; Care should be taken to the effects of intermediate principal stress and shear strength parameter variations of surrounding rocks on tunnel design and construction. 相似文献
14.
He Jianming Qiou Xiande 《保鲜与加工》1988,(4)
According to the weight stress field, the seismic stress field, the temperature stress field in the composite stratified rock mass, the initial stress field in rock mass is discussed theoretically in this paper. The obtained results are useful to make a recognition of the initial stress field in the composite stratified rock mass caused by influencing each other with different physical and mechanical properties between the rock beams. 相似文献
15.
Elasto-plastic analysis on surrounding rock of roadways based on seepage, strain softening and dilatancy 总被引:1,自引:0,他引:1
According to seepage body force, strain softening and rupture expansion of rock mass, elastic-plastic mechanics theory, distribution laws of stress and displacement of surrounding rock in seepage field are derived, and relationships between different zonation range of the surrounding rocks, pore water pressure, strain softening and rupture expansion are established. The results show that the pore water pressure and rupture expansion rock mass have a more obvious impact on the surrounding rock rupture area than the plastic zone. Both the plastic zone and the rupture area are larger when the seepage field is considered. The impact of strain softening on both the plastic zone and the rupture zone of surrounding rock is very significant, and both seepage and strain softening rupture expansion affect deformation of surrounding rock of roadways obviously. It provides certain reference values for the roadway support engineering in seepage field. 相似文献
16.
Recently, the construction of neighboring highway tunnels with small interval gets more and more in China. The construction of such tunnels proceeds usually by excavating one after another. The second tunnel is constructed with the surrounding rock disturbed by the first one. And the construction of second tunnel also has effect on the first excavated one. For revealing the interaction laws of such tunnel construction in combination with the engineering practice of Lanfeng tunnel at Jinshan Road in Chongqing, The FE numerical simulation analysis was used to study the characters of surrounding rock deformation, stress field, and plastic zone of the tunnel. From this analysis, it clearly shows that the excavation of second tunnel has significant influence on the first one. This study provides a scientific basis for design and excavation of neighboring highway tunnels. 相似文献
17.
The response properties of displacement and stress of tunnel support structure are discussed in detail under the action of horizontal earthquake acceleration(Ya),longitudinal earthquake acceleration(Za) and horizontal-longitudinal earthquake acceleration(YZa).This discussion is based on an analysis of the surrounding rock-support structure-earthquake interaction,adoption of an ADINA nonlinear finite element and construction mechanics,and transient dynamic time domain analysis of a large cross section tunnel.Results of analysis show that:(1) Horizontal earthquake acceleration has important influence on horizontal displacement,maximum principal stress,acceleration and velocity.(2) Longitudinal earthquake acceleration has important influence on longitudinal displacement,effective stress,maximum and minimum principal stress,maximum shear stress,acceleration and velocity.(3) When Ya=0.191g and 0.440g or Za=0.141g and their combined action,the initial support of tunnel would be damaged and the local lining would have partial damage.(4) When Ya=0.440g or Za=0.326g and their combined action,the lining of tunnel would be damaged.(5) When Ya=0.880g or l Za=0.652g,the support structure of tunnel would have severe damage. 相似文献
18.
The Sijiaotian Tunnel in Yunnan Dabao Highway lies in the narrow defile landscape,and the engineering geology condition is complex,with plenty of cienega.According to the actual situation of the Sijiaotian Tunnel Project in Yunnan Dabao Highway,the stability of the surrounding rock mass is studied by using a 3-D non-linear FEM.The Drucker-Prager criterion is chosen as the failure criterion of the rock.The relatively dangerous zone and the monitoring points in the tunnel are determined.The numerical results show that the Sijiaotian Tunnel is relatively stable.The conclusion has some significance for guiding the construction of similar projects. 相似文献
19.
The stress on the surrounding rocks affects severely the stability of tunnel. To estimate the stability of tunnel needs the transformation tendency of the stress on the surrounding rocks. After the transformation tendency of the stress on the surrounding rocks and the factors affected it are analyzed, the neural network model for predicting the stress on the surrounding rocks is created. The model is applied successfully to predict the change of the stress of the Guanyingyan tunnel in the Qiwan expressway, which proves that it is feasible to predict the stress on the surrounding rocks with the neural network model. The method is convenient and correct. 相似文献
20.
以隧道热害问题为背景,通过模型试验、近似模拟湿喷技术、定量分析及微观测试相结合的方法研究不同掺量玄武岩纤维喷射混凝土劈裂强度和粘结强度等力学性能的影响,横向对比标准养护和干热养护下的不同体积掺量的玄武岩纤维混凝土的力学性能,同时也加入硅灰以及钢钎维作为参照,以便从机理程度上提出更有效的解决热害措施。试验研究表明:在混凝土中加入玄武岩纤维,对混凝土起到了增强和阻裂的作用,改善了混凝土的脆性易裂的破坏状况。干热环境下,加入少量的玄武岩纤维能够提高混凝土的力学性能。当玄武岩掺量为0.1%玄+5%硅灰时,喷射混凝土的力学性能最好,加入0.2%玄武岩纤维掺量,也有一定程度的改善。实际隧道施工中,可通过加入适量的玄武岩纤维和适量的硅灰,可降低混凝土在热害环境下的危害。 相似文献