粉煤灰对高强混凝土收缩徐变的影响试验研究及其修正模型

粉煤灰对高强混凝土收缩徐变的影响直接关系到结构长期性能的合理确定。制作粉煤灰掺量分别为0、12%和24%的100 mm×100 mm×400 mm的C50混凝土棱柱体试件,在试验室条件下进行收缩及不同加载龄期的徐变试验,研究了粉煤灰对高强混凝土收缩徐变的影响。根据试验结果评估了目前常用的4种相关规范公式对高强混凝土收缩徐变的适用性,并引入粉煤灰影响系数以综合反映粉煤灰掺量和加载龄期对高强混凝土收缩徐变的影响,根据试验结果和现有研究成果提出了其修正模型。分析结果表明,JTG D 62和GL 2000推荐的收缩徐变预测模式与基准试件实测结果较为吻合,验证结论亦说明所引入的粉煤灰影响系数可应用于掺粉煤灰高强混凝土的收缩徐变预测。     

等截面钢管混凝土格构柱骨架曲线的统一算法

介绍了斜缀管式和平缀管式等截面钢管混凝土格构柱骨架曲线的计算方法并进行评价分析。研究表明,不同缀管布置形式的钢管混凝土格构柱,其抗震性能具有共性。借鉴钢管混凝土单肢柱的计算框架,开展等截面钢管混凝土格构柱骨架曲线的统一算法研究,对弹性刚度、水平峰值荷载、峰值荷载位移、下降段刚度等主要参数的计算方法进行了深入探讨和算例分析,并以干海子大桥格构柱墩为研究对象,采用OpenSEES有限元程序,对骨架曲线算法进行工程实例验证。研究结果表明,计算值与试验值及有限元计算结果均吻合良好。最后提出了适合工程应用的等截面钢管混凝土格构柱骨架曲线的统一简化算法,为钢管混凝土计算理论的进一步完善和规程编撰提供参考。     

早龄混凝土的压缩与拉伸徐变及其研究现状

早龄混凝土的拉伸、压缩徐变规律及其结构徐变应力计算方法是对早期裂缝进行有效预测并控制的关键。既有的徐变研究主要侧重于成熟混凝土,而早龄混凝土徐变相关的科学研究还有待进一步深入。对早龄混凝土的压缩和拉伸徐变研究成果、测试方法及其徐变应力计算方法进行了详细综述。研究表明：目前混凝土早龄期拉伸、压缩徐变试验测试尚无规范可循,相关试验数据较为缺乏;混凝土早龄期徐变预测模型基本未考虑其在低应力水平下的非线性性质;早龄混凝土结构非线性徐变应力理论分析方法亦不尽完善。基于系统试验研究和固化徐变理论建立混凝土非线性徐变理论模型,对早龄混凝土结构采用同时考虑受拉和受压不同应力松弛特性的非线性徐变应力理论计算方法,应可提高早龄结构的有限元仿真精度。     

Testing and modeling studies on creep characters of supports for tunnel using nonlinear constitutive model

Creep characters of tunnel supports structure is analyzed according to triaxial creep test of concrete specimen of deep tunnel supports structure adopting MTS815 hydraulic servo system. The creep parameters of nonlinear creep model are presented based oncreep curve. The finite element numerical model has been established considering tunnel construction process, creep characters of surrounding rock and support structure. The displacement characteristics, the effective stress and the maximum shear stress in different position in primary support and second lining are obtained through creep characters analysis of surrounding rock and supports structure. The features of displacement and stress dependent time of tunnel supports has visible difference comparing with discard creep effect and calculation displacement and practical monitoring results is basic concordance. The creep characters of surrounding rock and tunnel supports should be considered for deep tunnel.     

Uncertainty Analysis of Long-term Deformation for Prestressed Concrete Beam

Owing to the randomness of shrinkage and creep of concrete, random analysis method should be adopted to give a reasonable result with probabilistic guarantee. Stochastic variables for long-term analysis with GL2000 model about creep and shrinkage of concrete were presented. Combining Monte Carlo sampling with the response surface method, the stochastic analysis model was performed which is on time-variant deflection of prestressed concrete bridge. The long-term deflection of a prestressed concrete bridge was analyzed by this model. Sensitivity analysis and parametric study were carried out. And the uncertainty of creep model, elastic modulus of concrete, magnitude of sustained load, and prestress forces are the most important factors for long-term deflection. Furthermore, controlling accuracy of prestress forces and delaying the loading time are helpful to inhibit long-term deflection.     

Design Approach on Flexural Load-carrying Capacity of Steel Beam to CFST Column Joints with External Stiffening Ring

A 3-D finite element model is established by ABAQUS to simulate the behavior of the joints with concrete-filled steel tubular (CFST) column to steel beam using external stiffening ring.The load versus deformation curves of this type of joints are compared between theoretical and experimental results,and in good agreement.Parametric analysis is performed to study the flexural load-carrying capacity of the joint.The width of external stiffening ring,the steel ratio of CFST column,the ultimate strength of steel beam,the strength of steel tube and beam,the concrete strength,the axial load ratio,and the beam to column linear stiffness ratio are considered as parameters.The simplified practical design approach is proposed based on parameter analysis of the flexural load-carrying capacity of these joints.The practical calculated values are in good agreement with the FEM results.     

Nonlinear Seismic Response Analysis of Long- span CFST Arch Bridge

The non-linear seismic response behavior of concrete filled in steel tube(CFST) arch bridge subjected to synchronous seismic excition and multi-support seismic excitation is studied in this paper.The non-linear seismic response of CFST arch bridge is calculated by time-history analysis method,and the effect of geometric nonlinear to long-span CFST arch bridge is studied.The influence of internal-force and deformence under dead-load,multi-support seismic excitation,etc to nonlinear seismic response behavior of CFST arch bridge is analysed.The result show that the effect of geometric nonlinear to long-span CFST arch bridge is obvious.     

A simplified approach to define the yield surface of concrete-filled square steel tubes subjected to compression-bending

When the plastic hinge method is used to simulate the elasto-plastic properties of concrete-filled steel tubular structures,the plastic interactive yield surfaces of concrete-filled steel tubular column sections need to be defined.Although the fiber model approach can be well applied to the yield surface analysis,the numerical method is still complicated for the real applications.Therefore based on the experimental and theoretical researches on concrete-filled square steel tubular (CFST) members,this paper develops one method to determine the elastic element parameters.Then a simplified approach to quickly define the axial force-moment interactive plastic yield surface of concrete-filled square steel tubular columns is developed through theoretical analysis and a large number of parametric analyses.Finally,the fiber model method is adopted to verify the feasibility and validity of the proposed method.Results of the two methods are in good agreement,which indicates that the proposed method is reliable.     

Finite Element Analysis of the Influence of Steel Strength on Beam-to-column Composite Connections

Because high material strength and composite load-bearing are emphasized in constructing members for high-rise steel frame structures, in a composite connection, steel strength has a dramatic influence on both the bearing performance and the composite action of the concrete slab. Based on a finite element analysis, we discuss the composite effect and the connection breaking mode, focusing on the performance change of the composite effect in adopting high strength steel. It can be found from the results that, along with the improvement of the steel strength, the elastic and plastic ultimate strength of the composite connection will increase, the ductility will decrease to a certain extent, and the composite effect of the concrete slab will diminish. The collapse of the concrete in a positive moment side contacting the column flange is viewed as the limiting state of the connection.     

盐岩水平储气库的相似模拟建腔和长期稳定性分析

利用地下盐穴作为油气储库是一种常见的方法。但由于中国地下盐矿层状盐岩居多,特点是单层厚度薄,不溶物含量高,因此单井造腔腔型控制难度大,造腔速度慢。根据双井对流建库方法,通过实验模拟建造的水平盐穴为模型基础,依据湖北云应地区盐矿地质条件和盐岩的物理力学性质,数值模拟其在不同埋深情况下建造后腔体长期运行体积收缩情况。通过实验发现采用双井对流造腔方法建设储气库是可行的,腔体的形状可以通过流量和油液分界面来控制。对地下盐岩水平储气库的岩石长期蠕变模拟发现,水平储气库随着埋深越大相同蠕变期内条件下腔体的体积收缩率和腔体周边塑性变形区体积也越大,同时使用寿命也越短。     

基于能量守恒定律对西原模型的改进与验证

在油气钻井工程中,由岩石蠕变引起的井眼缩径或井壁坍塌时有发生,本文基于能量守恒定律分析岩石蠕变的3个阶段,阐述传统的蠕变模型难以研究岩石加速蠕变阶段的原因。为此,在西原模型的基础上串联了一个绕组元件,建立改进西原模型及相应的本构方程。根据油气开发过程中所钻遇地层部分岩心的蠕变实验数据,对建立的改进西原模型进行验证,表明该模型能够很好地反映出岩石的蠕变特性,尤其是在岩石所受荷载大于长期强度的情况下,对凸显岩石加速蠕变阶段效果明显。该改进西原模型的提出可为进一步揭示岩石蠕变的客观规律提供理论依据。     

早龄期约束水泥砂浆环开裂预测模型分析

采用约束圆环试验研究了早龄期水泥砂浆的应力变化规律与开裂趋势。应用早龄期砂浆水化热模型、收缩与徐变等预测分析模型,建立了考虑温度、干缩与自收缩、徐变及硬化等多种效应综合作用下的约束水泥砂浆环早龄期时变应力分析模型,讨论了约束钢环与砂浆环的相对约束刚度对钢环约束效应的影响,提出了圆环开裂预测因子以分析约束水泥砂浆环的开裂趋势,与实际观察结果和数值分析结果的对比表明,上述理论分析与预测模型是合理并适用的。     

蠕变模型对约束钢梁抗火性能分析的影响

钢材在高温和荷载作用下产生明显蠕变变形,影响火灾中结构的变形和受力性能。现有的蠕变模型较多,但没有一个广泛适用的蠕变模型。不同的蠕变模型对钢结构抗火分析结果有很大影响。为了量化蠕变模型对约束钢梁抗火性能分析的影响,对5种常用的蠕变模型进行了对比分析。采用编写的约束钢梁计算程序,分别计算5种蠕变模型下约束钢梁的抗火性能并与试验数据进行对比。结果表明,采用Norton蠕变模型的计算结果与试验数据吻合最好。最后对影响约束钢梁抗火性能参数进行了研究,研究发现,Harmathy蠕变模型对约束梁抗火性能分析结果影响最大;不同蠕变模型对不同荷载比、约束刚度下的约束钢梁抗火性能影响程度均不同。     

The Application of Gene Expression Programming in Concrete Creep Analysis

The creep analysis of concrete is of great importance in stress calculation and deformation analysis of concrete structures. Since many factors affect concrete creep, the creep function is highly nonlinear, making it difficult to obtain satisfactory results using the traditional regression method. The gene expression programming (GEP) method, which combines the advantages of GA and gene programming, shows great promise and capability of data mining in nonlinear fitting. Based on theoretical analysis of GEP, the data mining model of the creep function was established by using GEP. Examples indicate this model is more accurate than functions obtained by conventional methods.     

早龄期混凝土蠕变模型比较

针对早龄期混凝土的蠕变松弛特性,以配比、强度以及不同加载龄期的混凝土蠕变试验数据为依据,对比研究了CEB-FIP模型、Muller模型、B3模型与笔者所建立变系数四参数Burgers模型的蠕变预测差异。研究结果表明:常用经验模型中,CEB-FIP模型具有较好的适应性,Muller模型对于高强混凝土的蠕变预测较好,基于固化理论的B3模型对于早龄期混凝土的蠕变预测值偏大,准确性较差。对比研究验证了变系数四参数Burgers模型中参数的物理意义与经验取值范围及其合理性与适用性。     

Nonlinear numerical simulation of steel reinforced concrete truss joints

This paper analyzes the steel reinforced concrete large span transfer truss joints using the finite element analysis software ANSYS, and get the joints deformation and the mechanics increase, such as deformation properties, stress distribution. The monitoring results during construction phase show that nonlinear numerical simulation analysis, which is in good agreement with the test results, is an effective method for the mechanical property analysis on this kind of structural components.     

Bearing capacity of composite columns reinforced by concrete filled steel tube

In this study, nine simplified short composite columns consisting of core CFST (concrete filled steel tube) of different diameters and outer reinforced concrete were constructed to study their compressive performance under axial or eccentric compression. The failure mode is characterized by the crush of the outer concrete. The bearing capacity increases at first and then decreases with further increase of the position coefficient. It can be concluded that position coefficient is an important structural parameter that has considerable influences on the ultimate bearing capacity of the composite columns. The outer concrete, steel tubes and longitudinal reinforcement are found to work in a cooperative manner under axial or eccentric compression when the position coefficient is about 0.5. An improved bearing capacity algorithm that takes the position coefficient into account has been proposed based on the experimental and simulation results and current technical specification in China. It has been proven to be precise and safe.     

Mechanical Behavior and Techno economic Analysis of Twice prestressed Simply Supported Composite Beam

Excessive creep camber of prestressed concrete bridge would result in risk on the traffic safety in high speed railway. To control creep camber of presstressed concrete bridge, a new twice prestressed technology was proposed to presstressed concrete beam. Four twice prestressed simply supported box girders with different prestressed degrees were designed as an example. Its section stress, strength and crack resistance in different construction stages were analyzed. Compared the creep camber between conventional prestressed simply supported concrete beam and twice prestressed simply supported composite beam with the same prestressed steels, it was shown that twice prestressed composite beam has a smaller stress gradient. And the creep camber decreased approximately 40% to 60% with building height reduction, as well as some 10% energy saving and some amount of concrete.     

On the Comparison of Calculation Models of Scaffold for High-rise and Long-span Structrues

In the construction of high-rise and long-span reinforced concrete structures, many safety accidents result from the defect of the analysis and erection of scaffold. To solve the problem, an accurate FEM model is adopted to analyze the scaffold and is compared with the common simplified models in practice. The comparison shows that the simplified models may do give unsafe results and so several suggestions for improvement are put forward.     

Service Life Prediction of Concrete Structures under Chloride Environment

The problems rendered from the conventional time marching, referring to stepwise time marching scheme (STMS) adopted in boundary element method (BEM) for chloride diffusion in concrete structures, were investigated, and a new time marching, referring to initial time marching scheme (ITMS) in BEM, was developed for evaluation of service life of the concrete structures under chloride environment. Results of the numerical examples show that the ITMS-BEM proposed can eliminate domain integral and simplify the computational model, so that the stability in iteration process can be improved, resulting in better efficiency and accuracy, compared with the STMS-BEM. It can also be concluded that the dimensions of the diffusion of chloride can affect the service life of the concrete structure significantly, which should be taken into account in structural design.