A NEW METHOD FOR DESIGN OF PSS PARAMETERS

The eigenvalue sensitivity methods is very useful not only in analysis of electric power system stability but also in design of the controllers. In this paper a new optimal method is proposed to design the parameters of PSS. Using this method the PSS is designed for a single machine-infinite bus system, and the results of digital simulation show that this method is very effective and useful.     

Design Quality Review System Based on Networks

Design quality review of product is an effective method to improve product quality. The inefficient traditional design review is not accord with modern yield requirement. The multiple system truss of design review is constructed based on the primary characteristics and the requirements of design review and the network technology. The mode of communication between client and server and the flow of design review system based on networks are expatiated. According to different phases of reveiw,the universal quality index system for evaluating the product design is established and the design review system based on networks is realized by NetMeeting.     

Design of Manufacturing System for Business

In the new environment, product development is the core of product innovation and quickly responsive to the market for the enterprises. The speed and effectiveness of development is the key factor to the success of product development. The design for business is the key technique in achieving the effectiveness of product development. And manufacturing system is the bridge between business and products. The design method of facing business is discussed, and the design flow and content of manufacturing system supporting facing business are pointed out. At the same time, the author also sets forth the construction definition, the construction design and the detailed design of the manufacturing system. So the design flow of manufacturing system facing business is established.     

SERIES-PARALLEL CORRECTION AND CAA FOR CANONICAL SYSTEM TYPE 2

This paper presents a simple and efficient engineering design method of series-parallel correction for canonical system type 2 and gives a practical design example.The following and anti-disturbance performances of the system by means of digital simulation are analyzed.The performance indexes in different design parameters are listed.This paper is available for reference in engineerng design.     

THE APPLICASION OF SUPERVISOR CALL(SVC) FUNCTION IN DEVELOPING OF RMS SYSTEM

RMS system is a running management system self designed and developed for M304s computer system. Supervisor call (SVC) is one kind of method of communication between user and system in designing of operating system. This article introduces you the way how to resolve the problem in RMS design by using supervisor call function, with brief introduction of system design.     

Design Method of a Metal V-belt CVT Hydraulic System

The design method on the hydraulic control system is one of the key technologies of a metal V-belt continuously variable transmission(CVT).It can change the ratio of the transmission system by adjusting the pushing force of the pulley.By analyzing the structure characteristics and force relations,the design method of an important parameter of the CVT hydraulic system and the rate of transmission ratio,are put forward by simulating to the emblematical driving models.The structure parameters of the hydraulic system is gotten and validated by simulation on specific driving model.An effective design method is provided to develop the continuously variable transmission system.     

Evaluating System Design and Realization of Microteaching Based on Fuzzy Compositive Judgment

Information inspecting and evaluating in information are the important aspects for microteaching development. The design and realization of microteaching compositive evaluating system by using database and software technology, and the method based on fuzzy compositive judgment to design the evaluating system, which provides a science and impersonal evaluating method are deeply disscussed. The system structure, which is compositive form of C/S and B/S, function model and realization method are described in detail. C/S part is mainly in charge for computing, statistics and evaluating, and B/S part mainly for issuing the result of evaluation and querying the information of system. It is proved to be true that this mixed structure gets good effects in the system development and usage.     

OPTIMIZATION DESIGN OF ADVANCED CORRECTION OF THE CONTROL SYSTEM BY A PASSIVE NETWORK

Optimization design of correction of the control systemby a passive network is studied in this paper.The design method guan-rantees collocation of a closed loop pole in a desired position,but alsominimizes the gain of the system amplifier,thus making the technicalrealization of the system easier.The design method is proved in thepaper.     

THE OPTIMAL DESIGN AND ENGINEERING APPLICATION OF DISTRIBUTION

This paper introduces the metod of optimal design of municipal water distribution,The main points are the theory,mathematical model,program frame figure and example in practice of the optimal method of hydraulics.The program is applicable to the design and calculation of the pipe network in a city. It gives a simple and convenient calculation method for multiple-scheme design and scheme cmparison of water supply system.     

Open motion control architecture of wind turbineand main controller design

In this paper, we propose a method to solve the problems with stochastic nonlinear and point to point architecture of the wind turbines. The proposed method presents an open motion control architecture and a linearized torque control system based on power curve LUT. We reference the PLCopen motion control standard that is used to design the linearized torque and pitch systems of the wind turbines. This proposes a new methodology for the main controller design and the system integration of wind turbines.     

A SYSTEMATIC EVALUATION METHOD BUILDING DESIGN PLAN

This paper discusses the evaluation method of building design plan with the view of systematization and presents factors concerning building design plan. According to characteristics of multifactor, multipurpose, multifunction and multi-administrative levels in building design system, this comprehensive evaluation method provides a scientific basis for policymakers.     

Research About the Knowledge Base for Motor Total Design Base on Knowledge-based Engineering

From the point of view of Knowledge-based Engineering, the knowledge expression, the knowledge organizing format, the knowledge base and management system is researched aiming at the characteristic of motor total design and the knowledge. The knowledge of motor concept design is expressed and organized by Object Oriented method, and the blocking knowledge base is built. Base on the academic research, the Object Oriented knowledge base and its management system for motor intelligent design platform are developed. The result indicates this knowledge base can effectively express the motorcycle knowledge, and make reasoning simply.     

LCL型CPT系统的参数设计方法及频率特性分析

以金鲳鱼为原料,固定小麦粉与水的质量比为2∶1,食盐添加量2%,微波真空度0.095 MPa,在单因素试验的基础上,通过正交试验对微波真空技术膨化鱼糜饼工艺条件进行优化。结果表明,鱼糜饼制作的最佳工艺条件为:鱼糜含量35%,膨化温度100℃,膨化时间20 min,鱼糜饼厚度2 mm,在该工艺条件下,制得的膨化鱼糜饼色泽金黄、质地酥脆、风味清香,成品膨化率可达到540%。     

Product ontology screening and its application in variant design

A product ontology screening method which can be used in variant design is proposed. With the support of complete ontology view of product resources, the product functional requirement and structural characteristics are converted to demand constraints, which are used to screen product ontology. For different screening hierarchies and objects, different screening rules such as pattern matching, case matching combined with manual decision and auto matching on the basis of case-based reasoning are adopted. The semi-automatic screening method with human-computer cooperation has impressive effectiveness on the improvements of the accuracy of design schemes and the flexibility and efficiency of design process. Finally, a variant design supporting system for building door and window is developed, which proves the feasibility and effectiveness of the method.     

Study on the Mechanic Product Parallel Design System Based on Characteristic Technology

In this paper ,the parallel design method and its property are discussed,a parallel design system structure based on characteristic technology is presented,and a valve parallel system is developed,and it successfully works in a factory.     

Twisted Blade Virtual Design for Steam Turbine

Due to lack of estimation during initial stage of traditional physical design process for industry product, the efficiency of conduct development is low with high cost. A basic framework of twisted blade virtual design is set up based on the theory and method of product virtual design, and aiming at the thermodynamic process of middle or lower stage of steam turbine. The molding rule of twisted blade is found by thermodynamic computation program. The study of blade virtual design is carried through from 3-dimensional modeling to simulation test. The combination of thermal power theory, computer simulation technology and CAD system forms a kind of design method with the superiority such as high efficiency, low cost and good decidability is represented in the virtual design of turbine blade.     

A PRACTICAL METHOD FOR SELECTING STEEL USING COMPUTER AIDED DESIGN(CAD)SYSTEM FOR REINFORCED CONCRETE FRAME

How to select automatically the disposition of steel bar in a computer aided design(CAD)system for reinforced concrete frame structure is aproblem relatedt ot he practicality and increasing capacity of the CAD system.This paper suggests a practical method for selecting steel bar of beam in framestructure with the application of knowledge and experience of the experts forreasoning and judging.The method is convenient for calculation.The results ofcalculation are in agreement with detailing requirement and usual engineeringpractice.The method has great practical value.     

包装粮低温仓的设计与特点分析

通过包装粮低温仓的设计实例,介绍了该低温仓的设计参数、冷却降温运行和维持仓温运行的方法,分析了包装粮低温仓的设计特点.     

Power Model of Bond Graph and Dynamic Simulation of Hoist System for Multi-Flow Transmission

The double drive hoist reducer developed in the planetary gear is a new generation of energy saving and environment protecting hoist product. The multi flow transmission system theory of hoist is analyzed. With the theory and method of bond graph,a bond graph model with coupled vibration is established for hoist multi flow transmission system for the first time. The state equation of the system is developed and dynamic simulation analysis is also carried out. The internal changing law and relationship of the system for the state variable are got. Therefore, the dynamic properties and gearing features of this system are revealed comprehensively. The research results can provide the dynamic analysis method and design basis for multi flow transmission system of hoist.     

Realization of Intelligent Vehicle System for Target Recognition and Tracking

After analyzing target recognition and tracking technique, a method of developing specifically target tacking system is proposed, which uses digital image manipulation to target recognition. Software and hardware design of intelligent vehicle are presented in detail. The system uses digital image manipulation technology to cognize the certain target through a pickup camera installed on the front of the intelligent vehicle. When the target is moving, singlechip receives the commands from the computer and then control the vehicle to trace target. The system can run by itself, regardless of artificial control. This design provides a platform for the research of Growing Machine Intelligence system.