Phenology based irrigation scheduling and determination of crop coefficient of winter maize in rice fallow of eastern India

Vast rainfed rice area (12 million ha) of eastern India remains fallow after rainy season rice due to lack of appropriate water and crop management strategies inspite of having favourable natural resources, human labourers and good market prospects. In this study, a short duration crop, maize, was tried as test crop with different levels of irrigation during winter season after rainy season rice to increase productivity and cropping intensity of rainfed rice area of the region. Maize hybrid of 120 days duration was grown with phenology based irrigation scheduling viz., one irrigation at early vegetative stage, one irrigation at tassel initiation, two irrigation at tassel initiation + grain filling, three irrigation at early vegetative + tassel initiation + grain filling and four irrigation at early vegetative + tassel initiation + silking + grain-filling stages. Study revealed that one irrigation at tassel initiation stage was more beneficial than that of at early vegetative stage. Upto three irrigation, water use efficiency (WUE) was increased linearly with increased number of irrigation. With four irrigations, the yield was higher, but WUE was lower than that of three irrigations, which might be due to increased water application resulted in increase crop water use without a corresponding increase of yield for the crop with four irrigations. The crop coefficients (K_c) at different stages of the crop were derived after computing actual water use using field water balance approach. The crop coefficients of 0.42–0.47, 0.90–0.97, 1.25–1.33, and 0.58–0.61 were derived at initial, development, mid and late season, respectively with three to four irrigation. Study showed that leaf area index (LAI) was significantly correlated with K_c values with the R² values of 0.93. When LAI exceeded 3.0, the K_c value was 1. Study revealed that the K_c values for the development and mid season stage were slightly higher to that obtained by the procedure proposed by FAO, which might be due to local advection.     

Water and nitrate movement in drip-irrigated onion under fertigation and irrigation treatments

Frequent fertigation of crops is often advocated in the technical and popular literature, but there is limited evidence of the benefits of high-frequency fertigation. Field experiments were conducted on an Indo-American Hybrid var., Creole Red, of onion crop during three winter seasons of 1999–2000 through 2001–2002 in coarse-textured soil of Delhi under the semi-arid region of India. Three irrigation levels of 60, 80 and 100% of the crop evapotranspiration (ET) and four fertigation frequencies of daily, alternate day, weekly and monthly comprised the fertigation treatment. Analysis of soil samples indicated considerable influence of fertigation frequency on NO₃-N distribution in soil profile. NO₃-N in lower soil profiles (30.0–60.0 cm soil depth) was marginally affected in daily, alternate day and weekly fertigation. However, fluctuations of NO₃-N content in 0.0–15.0, 15.0–30.0, 30.0–45.0 and 45.0–60.0 cm soil depth was more in monthly fertigation frequency. The level of soil NO₃-N after the crop season shows that more NO₃-N leached through the soil profile in monthly fertigation frequency. Amounts of irrigation water applied in three irrigation treatments proved to be too small to cause significant differences in the content of NO₃-N leached beyond rooting depth of onion. Yield of onion was not significantly affected in daily, alternate day and weekly fertigation, though there was a trend of lower yields with monthly fertigation. The highest yield was recorded in daily fertigation (28.74 t ha⁻¹) followed by alternate day fertigation (28.4 t ha⁻¹). Lowest yield was recorded in monthly fertigation frequency (21.4 t ha⁻¹). Application of 56.4 cm irrigation water and 3.4 kg ha⁻¹ urea per fertigation (daily) resulted in highest yield of onion with less leaching of NO₃-N.     

Latent heat flux over a furrow-irrigated tomato crop using Penman–Monteith equation with a variable surface canopy resistance

The Penman–Monteith (P–M) model with a variable surface canopy resistance (r_c) was evaluated to estimate latent heat flux (LE) or crop evapotranspiration (ET) over a furrow-irrigated tomato crop under different soil water status and atmospheric conditions. The hourly values of r_c were computed as a function of environmental variables (air temperature, vapor pressure deficit, net radiation, and soil heat flux) and a normalized soil water factor (F), which varies between 0 (wilting point, θ_WP) and 1 (field capacity, θ_FC). The Food and Agricultural Organization (FAO-56) method was also evaluated to calculate daily ET based on the reference evapotranspiration, crop coefficient and water stress coefficient. The performance of the P–M model and FAO-56 method were evaluated using LE values obtained from the Bowen ratio system. On a 20 min time interval, the P–M model estimated daytime variation of LE with a standard error of the estimate (SEE) of 46 Wm⁻² and an absolute relative error (ARE) of 3.6%. Thus, daily performance of the P–M model was good under soil water content ranging from 118 to 83 mm (θ_FC and θ_WP being 125 and 69 mm, respectively) and LAI ranging from 1.3 to 3.0. For this validation period, the calculated values of r_c and F ranged between 20 and 114 s m⁻¹ and between 0.87 and 0.25, respectively. In this case, the P–M model was able to predict daily ET with a SEE of 0.44 mm h⁻¹ (1.1 MJ m⁻² d⁻¹) and an ARE of 3.9%. Furthermore, the FAO-PM model computed daily ET with SEE and ARE values of 1.1 mm h⁻¹ (2.8 MJ m⁻² d⁻¹) and 5.2%, respectively.     

Performance of temperate aerobic rice under different water regimes in North China

Since the late 1990s, aerobic rice varieties have been released to farmers in the North China Plain to grow rice as a supplementary-irrigated upland crop to cope with water scarcity. Little is known about their yield potential, water use, water productivity (WP), and flood tolerance. In 2001–2002, experiments with aerobic rice varieties HD502 and HD297 and lowland rice variety JD305 were conducted under aerobic and flooded conditions. Under aerobic conditions, five irrigation treatments were implemented. Under flooded conditions, JD305 yielded up to 8.8 t ha⁻¹, HD502 up to 6.8 t ha⁻¹, and HD297 up to 5.4 t ha⁻¹. Under aerobic conditions, the aerobic varieties yielded higher than the lowland variety. HD502 produced 3–3.5 t ha⁻¹ with 450–500 mm total water input and 5.3–5.7 t ha⁻¹ with 650 mm water input and more. HD297 produced 3–3.5 t ha⁻¹ with 450–500 mm total water input and 4.7–5.3 t ha⁻¹ with 650 mm water input and more. The water productivity of aerobic rice under aerobic conditions was higher or on a par with that of the lowland variety under flooded conditions, reaching values of 0.6–0.8 g grain kg⁻¹ water. The relatively high yields of the aerobic varieties under aerobic soil conditions were obtained under “harsh” conditions for growing rice. The soil contained more than 80% sand, was permeable, and held water above field capacity for a few hours after irrigation only. The groundwater table was deeper than 20 m, the soil moisture content in the rootzone was mostly between 50 and 80% of saturation, and soil moisture tension went up to 90 kPa. We conclude that the aerobic rice varieties HD502 and HD297 are suitable for water-scarce environments, and can stand being periodically flooded.     

Water use and lint yield response of drip irrigated cotton to the length of irrigation season

A 2-year experiment was conducted at Tal Amara Research Station in the Bekaa Valley of Lebanon to determine water use and lint yield response to the length of irrigation season of drip irrigated cotton (Gossypium hirsutum L.). Crop evapotranspiration (ET_crop) and reference evapotranspiration (ET_rye-grass) were directly measured at weekly basis during the 2001 growing period using crop and rye-grass drainage lysimeters. Crop coefficients (K_c) in the different growth stages were calculated as ET_crop/ET_rye-grass. Then, the calculated K_c values were used in the 2002 growing period to estimate evapotranspiration of cotton using the FAO method by multiplying the calculated K_c values by ET_rye-grass measured in 2002. The length of irrigation season was determined by terminating irrigation permanently at first open boll (S1), at early boll loading (S2), and at mid boll loading (S3). The three treatments were compared to a well-watered control (C) throughout the growing period. Lint yield was defined as a function of components including plant height at harvest, number of bolls per plant, and percentage of opened bolls per plant.Lysimeter-measured crop evapotranspiration (ET_crop) totaled 642 mm in 2001 for a total growing period of 134 days, while when estimated with the FAO method in 2002 it averaged 669 mm for a total growing period of 141 days from sowing to mature bolls. Average K_c values varied from 0.58 at initial growth stages (sowing to squaring), to 1.10 at mid growth stages (first bloom to first open boll), and 0.83 at late growth stages (early boll loading to mature bolls).Results showed that cotton lint yields were reduced as irrigation amounts increased. Average across years, the S1 treatment produced the highest yield of 639 kg ha⁻¹ from total irrigations of 549 mm, compared to the S2 and S3 treatments, which yielded 577 and 547 kg ha⁻¹ from total irrigations of 633 and 692 mm, respectively, while the control resulted in 457 kg ha⁻¹ of lint yield from 738 mm of irrigation water. Water use efficiency (WUE) was found to be higher in S1 treatment and averaged 1.3 kg ha⁻¹ mm⁻¹, followed by S2 (1.1 kg ha⁻¹ mm⁻¹), and S3 (1.0 kg ha⁻¹ mm⁻¹), while in the control WUE was 0.80 kg ha⁻¹ mm⁻¹. Lint yield was negatively correlated with plant height and the number of bolls per plant and positively correlated with the percentage of opened bolls. This study suggests that terminating irrigation at first open boll stage has been found to provide the highest cotton yield with maximum WUE under the semi-arid conditions of the Bekaa Valley of Lebanon.     

The effects of different irrigation regimes on cucumber (Cucumbis sativus L.) yield and yield characteristics under open field conditions

A study was conducted to determine the effects of different drip irrigation regimes on yield and yield components of cucumber (Cucumbis sativus L.) and to determine a threshold value for crop water stress index (CWSI) based on irrigation programming. Four different irrigation treatments as 50 (T-50), 75 (T-75), 100 (T-100) and 125% (T-125) of irrigation water applied/cumulative pan evaporation (IW/CPE) ratio with 3-day-period were studied.Seasonal crop evapotranspiration (ET_c) values were 633, 740, 815 and 903 mm in the 1st year and were 679, 777, 875 and 990 mm in the 2nd year for T-50, T-75, T-100 and T-125, respectively. Seasonal irrigation water amounts were 542, 677, 813 and 949 mm in 2002 and 576, 725, 875 and 1025 mm in 2003, respectively. Maximum marketable fruit yield was from T-100 treatment with 76.65 t ha⁻¹ in 2002 and 68.13 t ha⁻¹ in 2003. Fruit yield was reduced significantly, as irrigation rate was decreased. The water use efficiency (WUE) ranged from 7.37 to 9.40 kg m⁻³ and 6.32 to 7.79 kg m⁻³ in 2002 and 2003, respectively, while irrigation water use efficiencies (IWUE) were between 7.02 and 9.93 kg m⁻³ in 2002 and between 6.11 and 8.82 kg m⁻³ in 2003.When the irrigation rate was decreased, crop transpiration rate decreased as well resulting in increased crop canopy temperatures and CWSI values and resulted in reduced yield. The results indicated that a seasonal mean CWSI value of 0.20 would result in decreased yield. Therefore, a CWSI = 0.20 could be taken as a threshold value to start irrigation for cucumber grown in open field under semi-arid conditions.Results of this study demonstrate that 1.00 IW/CPE water applications by a drip system in a 3-day irrigation frequency would be optimal for growth in semiarid regions.     

Maximum and Actual Evapotranspiration for Barley (Hordeum vulgare L.) through NOAA Satellite Images in Castilla-La Mancha,Spain

An easy-to-follow methodology is developed for the assessment of regional evapotranspiration in Castilla-La Mancha, a semi-arid region of Spain. The methodology is applied to barley crops to monitor the irrigation scheduling over the region, by using remote sensing techniques supplemented by ground measurements. The methodology can be based on either of two models. In the first one, established by Caselles and Delegido,¹the reference evapotranspiration,ET_o, derives from the expressionET_o=AR_g(T_a)_max+BR_g+CwhereA, BandCare empirical coefficients, depending on climatic parameters and determined for each region;R_gis the daily global radiation; and (T_a)_maxis the maximum air temperature. The second model, proposed by Jacksonet al.,²considers the actual evapotranspirationER=R_n+D(T_a−T_s) whereR_n, is the net radiation,T_aandT_sare the air and crop surface temperatures, respectively, andDis a semi-empirical coefficient. Both methods were compared with the method of Penman (considered standard), and resulted in differences of ±1 mm  d⁻¹. The developed methodology has been applied to map the reference and the actual evapotranspiration over a 10×10 km area, using the thermal-infrared information provided by the AVHRR (advanced very high resolution radiometer) sensor on board the NOAA (national oceanic atmosphere administration) satellite on a selected date.     

Potential nitrate losses under different agricultural practices in the pampas region,Argentina

Fertilization is an important cause of groundwater contamination with nitrate in agricultural soils. The objectives of the present work were: (i) to quantify the nitrate leaching in two fertilized and irrigated soils of the Pampas Region, Argentina; (ii) to test the ability of the NLEAP model to predict residual and leached nitrate in those soils. The soils were a Typic Hapludoll and a Typic Argiudoll. The treatments were: natural grassland never ploughed or fertilized; maize with a short history of fertilization; maize with a long history of fertilization; irrigated maize with a long history of fertilization. Both sites were sampled after harvest in two consecutive years to a 3 m depth. Residual nitrate and potential losses below 150 cm were estimated by NLEAP model. The average amount of nitrate (NO₃-N), including values of all treatments, in the upper layer (0–1.5 m) was 128 kg NO₃-N ha⁻¹ in the first sampling date and was consistently lower in the second sampling date (38 kg NO₃-N ha⁻¹). In the deeper layer (1.5–3 m) these values were 80 and 28 kg NO₃-N ha⁻¹ for the first and second sampling date, respectively. Differences between the non-fertilized and the fertilized treatments were significantly smaller in the second sampling date. Obtained results suggest that the rainfall previous to the first sampling was not enough to displace nitrate below 3 m depth. The afterwards heavy rainfall leached nitrate previously accumulated in the soil. Complementary irrigation did not affect nitrate movements. Simulated residual and leached nitrate showed a high correlation with observed values. Nitrate leaching was more associated to rainfall regime and crop yields than to soil type. Simulated residual and leached nitrate showed a high correlation with measured values in both soils, which suggests that NLEAP was appropriate to predict soil nitrate leaching under the studied conditions.     

Cotton yield and applied water relationships under drip irrigation

Different irrigation scheduling methods and amounts of water ranging from deficit to excessive amounts were used in cotton (Gossypium hirsutum L.) irrigation studies from 1988 to 1999, at Lubbock, TX. Irrigation scheduling treatments based on canopy temperature (T_c) were emphasized in each year. Surface drip irrigation and recommended production practices for the area were used. The objective was to use the 12-year database to estimate the effect of irrigation and growing season temperature on cotton yield. Yields in the irrigation studies were then compared with those for the northwest Texas production region. An irrigation input of 58 cm or total water application of 74 cm was estimated to produce maximum lint yield. Sources of the total water supply for the maximum yielding treatments for each year averaged 74% from irrigation and 26% from rain. Lint yield response to irrigation up to the point of maximum yield was approximated as 11.4 kg ha⁻¹ cm⁻¹ of irrigation between the limits of 5 and 54 cm with lint yields ranging from 855 to 1630 kg ha⁻¹. The intra-year maximum lint yield treatments were not limited by water input, and their inter-year range of 300 kg ha⁻¹ was not correlated with the quantity of irrigation. The maximum lint yields were linearly related to monthly and seasonal heat units (HU) with significant regressions for July (P=0.15), August (P=0.07), and from May to September (P=0.01). The fluctuation of maximum yearly lint yields and the response to HU in the irrigation studies were similar to the average yields in the surrounding production region. The rate of lint yield increase with HU was slightly higher in the irrigation studies than in the surrounding production area and was attributed to minimal water stress. Managing irrigation based on real-time measurements of T_c produced maximum cotton yields without applying excessive irrigation.     

Trickle and sprinkler irrigation of potato (Solanum tuberosum L.) in the Middle Anatolian Region in Turkey

The potato (Solanum tuberosum L.) is widely planted in the Middle Anatolian Region, especially in the Nigde-Nevsehir district where 25% of the total potato growing area is located and produces 44% of the total yield. In recent years, the farmers in the Nigde-Nevsehir district have been applying high amounts of nitrogen (N) fertilizers (sometimes more than 900 kg N ha⁻¹) and frequent irrigation at high rates in order to get a much higher yield. This situation results in increased irrigation and fertilization costs as well as polluted ground water resources and soil. Thus, it is critical to know the water and nitrogen requirements of the crop, as well as how to improve irrigation efficiency. Field experiments were conducted in the Nigde-Nevsehir (arid) region on a Fluvents (Entisols) soil to determine water and nitrogen requirements of potato crops under sprinkler and trickle irrigation methods. Irrigation treatments were based on Class A pan evaporation and nitrogen levels were formed with different nitrogen concentrations.The highest yield, averaging 47,505 kg ha⁻¹, was measured in sprinkler-irrigated plots at the 60 g m⁻³ nitrogen concentration level in the irrigation treatment with limited irrigation (480 mm). Statistically higher tuber yields were obtained at the 45 and 60 g m⁻³ nitrogen concentration levels in irrigation treatments with full and limited irrigation. Maximum yields were obtained with about 17% less water in the sprinkler method as compared to the trickle method (not statistically significant). On the loam and sandy loam soils, tuber yields were reduced by deficit irrigation corresponding to 70% and 74% of evapotranspiration in sprinkler and trickle irrigations, respectively. Water use of the potato crop ranged from 490 to 760 mm for sprinkler-irrigated plots and 565–830 mm for trickle-irrigated treatments. The highest water use efficiency (WUE) levels of 7.37 and 4.79 kg m⁻³ were obtained in sprinkle and trickle irrigated plots, respectively. There were inverse effects of irrigation and nitrogen levels on the WUE of the potato crops. Significant linear relationships were found between tuber yield and water use for both irrigation methods. Yield response factors were calculated at 1.05 for sprinkler methods and 0.68 for trickle methods. There were statistically significant linear and polynomial relationships between tuber yield and nitrogen amounts used in trickle and sprinkler-irrigated treatments, respectively. In sprinkler-irrigated treatments, the maximum tuber yield was obtained with 199 kg N ha⁻¹. The tuber cumulative nitrogen use efficiency (NUE_cu) and incremental nitrogen use efficiency (NUE_in) were affected quite differently by water, nitrogen levels and years. NUE_cu varied from 16 to 472 g kg⁻¹ and NUE_in varied from 75 to 1035 g kg⁻¹ depending on the irrigation method. In both years, the NH₄-N concentrations were lower than NO₃-N, and thus the removed nitrogen and nitrogen losses were found to be 19–87 kg ha⁻¹ for sprinkler methods and 25–89 kg ha⁻¹ for trickle methods. Nitrogen losses in sprinkler methods reached 76%, which were higher than losses in trickle methods.     

Spatial variability of solutes in a pecan orchard surface-irrigated with untreated effluents in the upper Rio Grande River basin

Untreated effluents are blended with water from the Rio Grande River and used for irrigation in the Juarez Valley of northern Mexico. Effluents are a source of nutrients, but may also be a source of heavy metal contamination. This study was conducted to characterize deposition patterns of selected metals, salts, and total nitrogen in a 6 ha pecan (Carya illinoenisis K.) orchard which had healthy-to-stunted trees with dieback. Orchard soil was collected along multiple transects to depths of 1.2 m, with spacing every 20 m. All solutes showed a magnitude variability in particular ions. Chromium, Ni, Pb, and Cd concentrations averaged <14 mg kg⁻¹. Soil Na, Ca, K, Mg, SO₄, Cl and NO₃–N averaged <100 mg kg⁻¹. Total N was <0.21%. Most solutes accumulated at the soil surface with the exception of Na and SO₄. Linear semi-variograms best described spatial metal deposition and surface clay content with a range of influence >189 m. Spherical semi-variograms best described spatial distribution of salts and total N, but accounted <50% of the variability. The solubility of solutes in moderately alkaline irrigation water and their specific behavior in calcareous soils likely affected deposition patterns. Estimated metal loads from irrigation over a 15-year period were <3 kg ha⁻¹, but about 187 Mg ha⁻¹ for total dissolved solids (salts). Pecan leaf tissue showed no signs of heavy metal accumulation. Suboptimum pecan growth was associated with salt accumulation in a clayey area with low permeability. Salts, in particular Na, rather than metals may be the most important inorganic contaminants for irrigated agriculture in this region. Salt loads in irrigation waters are expected to increase as agriculture increasingly relies on urban effluents too expensive to convert to potable water.     

Soil–plant water status and yield of sweet corn (Zea mays L. cv. Saccharata) as influenced by drip irrigation and planting methods

A field experiment was conducted during summer season of 1998 at the Main Research Station, University of Agricultural Sciences, Hebbal, Bangalore. Experiment consisted of four irrigation levels and two methods of planting. Drip irrigation at 0.8 Epan with normal planting recorded significantly higher green cob (20.07 t ha⁻¹) and fodder yield (24.87 t ha⁻¹) compared to either drip at 0.6 Epan or weekly surface irrigation at 0.8 Epan, while drip at 0.4 Epan under paired planting (10.53 and 15.23 t ha⁻¹, respectively registered the lowest. Drip at 0.4 Epan with normal planting recorded higher WUE of green cob and fodder (48.21 and 61.22 kg ha mm⁻¹) with total water requirement of 330.46 mm. With increase in water use (drip at 0.6 Epan, drip/surface irrigation at 0.8 Epan) the water use efficiency decreased. Drip irrigation at 0.8 Epan resulted in higher leaf water potential (−4, −7, −8 bars) at 20, 40 and 60 DAS before irrigation. Consequently, the RWC in the leaf was 81.10% and the available soil moisture ranged from 55.62 to 61.91%.     

Water–yield relations and optimal irrigation scheduling of wheat in the Mediterranean region

Crop yield is primarily water-limited in areas of West Asia and North Africa with a Mediterranean climate. Ten years of supplemental irrigation (SI) experiments in northern Syria were conducted to evaluate water–yield relations for bread wheat (Triticum aestivum L.) and durum wheat (Triticum turgidum L.), and optimal irrigation scheduling was proposed for various rainfall conditions. The sensitive growth stages of wheat to water stress were from stem elongation to booting, followed by anthesis, and grain-filling. Water stress to which crop subjected depends on rainfall and its distribution during the growing season; the stress started from early March (stem-elongation stage) or even in seedling stage in a dry year, and from mid-April (anthesis) in an average or wet year. Crop yield linearly increased with increase in evapotranspiration (ET), with an increase of 160 kg for bread wheat and of 116 kg for durum wheat per 10 mm increase of ET above the threshold of 200 mm. Water-use efficiency (WUE) with a yield ≥3 t ha⁻¹ was ca. 60% higher than that with yield <3 t ha⁻¹; this emphasises the importance of that to achieve effective use of water, optimal water supply and relatively high yields need to be ensured. Quadratic crop production functions with the total applied water were developed and used to estimate the levels of irrigation water for maximizing yield, net profit and levels to which the crops could be under-irrigated without reducing income below that which would be earned for full SI under limited water resources. The analysis suggested that irrigation scenarios for maximizing crop yield and/or the net profit under limited land resource conditions should not be recommended. The SI scenarios for maximizing the profit under limited water resource conditions or for a targeted yield of 4–5 t ha⁻¹ were recommended for sustainable utilization of water resources and higher WUE. The time of irrigation was also suggested on the basis of crop sensitivity index to water stress taking rainfall probability and available soil water into account.     

Evapotranspiration and seed yield of field grown soybean under deficit irrigation conditions

Evapotranspiration was measured for a reference crop, rye grass (Lolium prerenne) and soybean (Glycine max L. Merril) grown over two seasons in 2000 and 2001 at Tal Amara Research Station, Lebanon, using drainage and weighing lysimeters. Climatic data from the field weather station were recorded daily. Within the experimental plots, irrigation was withheld at full bloom, R2 stage (S1 treatment), at seed enlargement, R5 stage (S2 treatment) and at mature seeds, R7 stage (S3 treatment). Further, a control (C) was fully-irrigated throughout the growing period.Average crop evapotranspiration (ETc) as measured by the drainage lysimeters in 2000 totaled 800 mm for a total growing period of 140 days. However, when ETc was measured by the weighing lysimeter in 2001, it was 725 mm during a growing period of 138 days. Average crop coefficients (K_c) were computed for different growth stages for the two growing periods by dividing the measured crop evapotranspiration (ETc) by the corresponding measured reference evapotranspiration (ETo-rye grass). K_c values ranged from 0.62 at V10 stage (10th node on the main stem beginning with the unifoliolate node) to 1.0 at pod initiation, then to 0.81 at mature pods.Growth parameters, leaf area index (LAI) and dry matter accumulation, have been shown to be sensitive to water stress caused by the deficit irrigations. However, growth parameters were found to compensate for water stress at early stages, while at seed maturity the compensation ability was decreased.Plants of the lysimeters produced average aboveground biomass and seed yield of 8.1 and 3.5 t ha⁻¹, respectively. However, in the well-irrigated field treatment, aboveground biomass and seed yield averaged 7.3 and 3.2 t ha⁻¹, respectively. Deficit irrigation at R2 stage reduced aboveground biomass and seed yield by 16 and 4%, respectively, while deficit irrigation at R5 stage reduced these two parameters by 6 and 28%, respectively, with comparison to the control. The significant decrease in biomass at R2 stage due to water deficit may be attributed to a pronounced reduction in the number of vegetative nodes. However, limited irrigation at this stage did not reduce significantly (P < 0.01) neither seed number nor seed weight, while at R5 stage these two parameters were reduced by 20 and 10%, respectively, with comparison to the control. Results showed also that deficit irrigation at R7 stage (S3) was more profitable than irrigation deficit at any other crop phenology and did not cause significant reductions either in seed number or seed weight.     

Irrigation management and hydrosalinity balance in a semi-arid area of the middle Ebro river basin (Spain)

The analysis of irrigation and drainage management and their effects on the loading of salts is important for the control of on-site and off-site salinity effects of irrigated agriculture in semi-arid areas. We evaluated the irrigation management and performed the hydrosalinity balance in the D-XI hydrological basin of the Monegros II system (Aragón, Spain) by measuring or estimating the volume, salt concentration and salt mass in the water inputs (irrigation, precipitation and Canal seepage) and outputs (evapotranspiration and drainage) during the period June 1997–September 1998. This area is irrigated by solid-set sprinklers and center pivots, and corn and alfalfa account for 90% of the 470 ha irrigated land. The soils are low in salts (only 10% of the irrigated land is salt-affected), but shallow (<2 m) and impervious lutites high in salts (average EC_e=10.8 dS m⁻¹) and sodium (average SAR_e=20 (meq l⁻¹)^0.5) are present in about 30% of the study area.The global irrigation efficiency was high (Seasonal Irrigation Performance Index=92%), although the precipitation events were not sufficiently incorporated in the scheduling of irrigation and the low irrigation efficiencies (60%) obtained at the beginning of the irrigated season could be improved by minimising the large post-planting irrigation depths given to corn to promote its emergence. The salinity of the irrigation water was low (EC=0.36 dS m⁻¹), but the drainage waters were saline (EC=7.5 dS m⁻¹) and sodic (SAR=10.3 (meq l⁻¹)^0.5) (average values for the 1998 hydrological year) due to the dissolution and transport of the salts present in the lutites. The discharge salt loading was linearly correlated (P<0.001) with the volume of drainage. The slope of the daily mass of salts in the drainage waters versus the daily volume of drainage increased at a rate 25% higher in 1997 (7.6 kg m⁻³) than in 1998 (6.1 kg m⁻³) due to the higher precipitation in 1997 and the subsequent rising of the saline watertables in equilibrium with the saline lutites. Drainage volumes depended (P<0.001) on irrigation volumes and were very low (194 mm for the 1998 hydrological year), whereas the salt loading was moderate (13.5 Mg ha⁻¹ for the 1998 hydrological year) taking into account the vast amount of salts stored within the lutites. We concluded that the efficient irrigation and the low salinity of the irrigation water in the study area allowed for a reasonable control of the salt loading conveyed by the irrigation return flows without compromising the salinization of the soil’s root-zone.     

Effect of initial soil salinity and subirrigation water salinity on potato tuber yield and size

A field lysimeter study was conducted to investigate the effect of initial soil salinity and salinity level of brackish subirrigation water on tuber weight and tuber size of three potato (Solanum tuberosum L.) cultivars (Kennebec, Norland and Russet Burbank) under simulated arid conditions. Both saline and non-saline initial soil conditions were simulated in a total of 36 lysimeters. Eighteen lysimeters were flushed with fresh water (0.2 dS/m), while the remaining 18 lysimeters were flushed with brackish water (2 dS/m). For each soil condition, two subirrigation water concentrations, 1 and 9 dS/m, were used in nine lysimeters each. For each subirrigation water treatment, three potato cultivars were grown. In all lysimeters, water table was maintained at 0.4 m from the soil surface. Arid conditions were simulated by covering the lysimeter top with plastic mulch, allowing the potato shoots to grow through a cut in the mulch. The average root zone salinities (EC_w) were found to be 1.2 and 1.5 dS/m in non-saline lysimeters subirrigated with 1 and 9 dS/m waters, respectively. The corresponding salinities were 3.2 and 3.7 dS/m in the saline lysimeters. Across cultivars, there was no significant effect of either initial soil salinity or subirrigation water salinity on total tuber weight. However, the weight of Grade A tubers was higher in non-saline soil than in saline soil. Kennebec and Russet Burbank Grade A tuber weights were not affected by the initial soil salinity. On the contrary, a significant reduction in Grade A and total tuber weight under initially saline soil was evident for the Norland cultivar.     

Environmental impact and economic benefits of site-specific nutrient management (SSNM) in irrigated rice systems

Site-specific nutrient management (SSNM) provides a field-specific approach for dynamically applying nutrients to rice as and when needed. This approach advocates optimal use of indigenous nutrients originating from soil, plant residues, manures, and irrigation water. Fertilizers are then applied in a timely fashion to overcome the deficit in nutrients between the total demand by rice to achieve a yield target and the supply from indigenous sources. We estimated environmental impact of SSNM and evaluated economic benefits in farmers’ fields in southern India, the Philippines, and southern Vietnam for two cropping seasons in 2002–2003. On-farm research comparing SSNM and the farmers’ fertilizer practice showed increased yield with SSNM for the three locations, even with reduced fertilizer N rates in some cases. SSNM increased partial factor productivity (kg grain kg⁻¹ fertilizer N) when fertilizer N use efficiency with the farmers’ fertilizer practice was relatively low such as at locations in Vietnam and the Philippines. Use of on-farm data with the DNDC model revealed lower percentage of total N losses from applied fertilizers with SSNM during an annual cycle of cropping and fallows. At the location in India, SSNM showed the potential of obtaining higher yields with increased fertilizer N use while maintaining low N₂O emissions. SSNM in the Philippines and Vietnam showed greater yields with less fertilizer N through improved fertilizer use efficiency, which could reduce N₂O emissions and global warming. Use of SSNM never resulted in increased emissions of N₂O per unit of grain yield, and in environments where higher yield could be obtained with less fertilizer N, the use of SSNM could result in reduced N₂O emissions per unit of grain yield. For the economic analysis, data were generated through focus group discussions (FGD) with farmers practicing SSNM and with other farmers not practicing SSNM. Based on FGD, the seasonal increase in yield of farmers solely due to use of SSNM averaged 0.2 Mg ha⁻¹ in southern Vietnam, 0.3 Mg ha⁻¹ in the Philippines, and 0.8 Mg ha⁻¹ in southern India. Farmers practicing SSNM at the study site in India used less pesticide. The added net annual benefit due to use of SSNM was 34 US$ ha⁻¹ year⁻¹ in Vietnam, 106 US$ ha⁻¹ year⁻¹ in the Philippines, and 168 US$ ha⁻¹ year⁻¹ in India. The increased benefit with SSNM was attributed to increased yield rather than reduced costs of inputs.     

Yield and physiological traits of prickly pear cactus ‘nopal’ (Opuntia spp.) cultivars under drip irrigation

A drip irrigation system was installed above ground at 30, 45, and 60% of the weekly-accumulated evaporation depth to evaluate productivity of harvested green cladodes (leaf-like stem segments) of the prickly pear cactus. Results showed that irrigating above 30% does not increase crop production. This percentage represents an annual irrigation depth of 0.74 m, which is one of the lowest in the regional irrigation district of “La Laguna” in the state of Coahuila. Nopal Opuntia ficus indica cv. C-69 showed the highest green cladode “nopalitos” yield, with 108 tonnes (ha⁻¹ year⁻¹) and sustained growth except during the cold season. Leaf area index was 80, net assimilation rate was 0.178 g (dm⁻² day⁻¹), and dry-weight at maximum productivity was 9.2 g for the confidence parameters for the week representing average green cladodes growth     

Optimal applied water and nitrogen for corn

Water and fertilizer applications should be limited due to scarce resources and environmental protection aspects. An analysis of crop yield production and profit maximization was conducted to determine the optimal water and nitrogen allocation. In this analysis based on crop production and cost functions, a series of equations for determination of applied water and nitrogen for three conditions of maximum yield (w_m and N_m, respectively), maximum profit under limited land (w_l and N_l, respectively) and maximum profit under limited water (w_w and N_w, respectively) were derived. The associated crop production function was determined from the results of a corn experiment with four levels of nitrogen fertilization and varying amounts of applied water via a line source of sprinkler irrigation. The previously derived equations were also applied to the experimental field data and finally the optimum amounts of applied water and nitrogen were determined at different conditions (w_m, w_l, and w_w for water and N_m, N_l, and N_w for nitrogen, respectively). At present market value (15.55 Rls/m³ for water and 652 Rls/kg for nitrogen) the amounts of w_m, w_l, and w_w were 1.0, 0.99, and 0.74 m, respectively, and the amounts of N_m, N_l, and N_w were 212, 212, and 206 kg N/ha, respectively. Because of the low price of nitrogen, the optimum amounts of nitrogen at three mentioned conditions were similar. But if the price of nitrogen and water are increased (i.e. 50000 Rls/kg N and 100 Rls/m³ water), then the amounts of applied nitrogen and water at the mentioned three conditions would be 212, 67, and 61 kg N/ha, and 1.00, 0.93, 0.84 m, respectively. When water is limiting, the optimum amount of applied water would not be different by changing the water price, however, it may be increased by a little amount when the nitrogen price is increased.     

The influence of crop canopy on evapotranspiration and crop coefficient of beans (Phaseolus vulgaris L.)

Experiments were conducted to investigate the effect of crop development on evapotranspiration and yield of beans (Phaseolus vulgaris L.) at the Instituto Agronômico (IAC), Campinas, State of São Paulo, Brazil, during the dry season of 1994. A completely randomized design was carried out with three population density treatments and four replications. The treatments were: (a) crop sown in evapotranspirometers at a density of 50 plants m⁻², and thereafter thinned to 25 plants m⁻², when the canopy achieved full ground cover; (b) crop sown with population densities of 14 and 28 plants m⁻² in an irrigated field. Crop growth was evaluated considering dry matter (DM), vegetative ground cover (GC%) and leaf area index (LAI). These parameters were successfully related to basal crop coefficient (k_cb) and crop coefficient (k_c), demonstrating the strong dependence of both coefficients on canopy development. A simulation study was carried out and showed that k_cb based on LAI would allow good estimates of water use for different plant density populations in the field.