Integrated effect of transplanting date, cultivar and irrigation on yield, water saving and water productivity of rice (Oryza sativa L.) in Indian Punjab: Field and simulation study

Individual effect of different field scale management interventions for water saving in rice viz. changing date of transplanting, cultivar and irrigation schedule on yield, water saving and water productivity is well documented in the literature. However, little is known about their integrated effect. To study that, field experimentation and modeling approach was used. Field experiments were conducted for 2 years (2006 and 2007) at Punjab Agricultural University Farm, Ludhiana on a deep alluvial loamy sand Typic Ustipsamment soils developed under hyper-thermic regime. Treatments included three dates of transplanting (25 May, 10 June and 25 June), two cultivars (PR 118 inbred and RH 257 hybrid) and two irrigation schedules (2-days drainage period and at soil water suction of 16 kPa). The model used was CropSyst, which has already been calibrated for growth (periodic biomass and LAI) of rice and soil water content in two independent experiments. The main findings of the field and simulation studies conducted are compared to any individual, integrated management of transplanting date, cultivar and irrigation, sustained yield (6.3-7.5 t ha⁻¹) and saved substantial amount of water in rice. For example, with two management interventions, i.e. shifting of transplanting date to lower evaporative demand (from 5 May to 25 June) concomitant with growing of short duration hybrid variety (90 days from transplanting to harvest), the total real water saving (wet saving) through reduction in evapotranspiration (ET) was 140 mm, which was almost double than managing the single, i.e. 66 mm by shifting transplanting or 71 mm by growing short duration hybrid variety. Shifting the transplanting date saved water through reduction in soil water evaporation component while growing of short duration variety through reduction in both evaporation and transpiration components of water balance. Managing irrigation water schedule based on soil water suction of 16 kPa at 15-20 cm soil depth, compared to 2-day drainage, did not save water in real (wet saving), however, it resulted into apparent water saving (dry saving). The real crop water productivity (marketable yield/ET) was more by 17% in 25th June transplanted rice than 25th May, 23% in short duration variety than long and 2% in irrigation treatment of 16 kPa soil water suction than 2-days drainage. The corresponding values for the apparent crop water productivity (marketable yield/irrigation water applied) were 16, 20 and 50%, respectively. Pooled experimental data of 2 years showed that with managing irrigation scheduling based on soil water suction of 16 kPa at 15-20 cm soil depth, though 700 mm irrigation water was saved but the associated yield was reduced by 277 kg ha⁻¹.     

A model of crop yield response to irrigation water salinity: theory,testing and application

A relationship between crop yield and irrigation water salinity is developed. The relationship can be used as a production function to quantify the economic ramifications of practices which increase irrigation water salinity, such as disposal of surface and sub-surface saline drainage waters into the irrigation water supply system. Guidelines for the acceptable level of irrigation water salinity in a region can then be established. The model can also be used to determine crop suitability for an irrigation region, if irrigation water salinity is high. Where experimental work is required to determine crop yield response to irrigation water salinity, the model can be used as a first estimate of the response function. The most appropriate experimental treatments can then be allocated. The model adequately predicted crop response to water salinity, when compared with experimental data.Abbreviations A Crop threshold rootzone salinity in Equation of Maas and Hoffman (dS/m) - B Fractional yield reduction per unit rootzone salinity increase (dS/m)^–1 - C_i Average salinity of applied water (dS/m) - C_r Average salinity of rainfall (dS/m) - C_s Linearly averaged soil solution salinity in the rootzone (dS/m) - C_se Linearly averaged soil saturation extract salinity in the rootzone (dS/m) - C_w Average salinity of irrigation supply water (dS/m) - C_z Soil solution salinity at the base of the crop rootzone (dS/m) - C Mean root water uptake weighted soil salinity in equation of Bernstein and François (1973) (dS/m) - E_p Depth of class A pan evaporation during the growing season (m) - ET_a Actual crop evapotranspiration during the growing season (m) - ET_m Maximum crop evapotranspiration during the growing season (m) - I The total depth of water applied during the growing season (including irrigation water and rainfall) (m) - K Empirical coefficient in leaching equation of Rhoades (1974) - K_c Crop coefficient for equation of Doorenbos and Pruit (1977) to estimate crop water use - K_y Yield response factor in equation of Doorenbos and Kassam (1974) - LF The leaching fraction - Ro Depth of rainfall runoff during the growing season (m) - R Depth of rainfall during the growing season (m) - W Depth of irrigation water applied during the growing season (m) - Y Relative crop yield - Y_a Actual crop yield (kg) - Y_m Maximum crop yield (kg) - /z Dimensionless depth for equation of Raats (1974), and empirical coefficient for the leaching equation of Hoffman and van Genutchen (1983)     

Evaluation of options for increasing yield and water productivity of wheat in Punjab, India using the DSSAT-CSM-CERES-Wheat model

The DSSAT-CSM-CERES-Wheat V4.0 model was calibrated for yield and irrigation scheduling of wheat with 2004–2005 data and validated with 13 independent data sets from experiments conducted during 2002–2006 at the Punjab Agricultural University (PAU) farm, Ludhiana, and in a farmer's field near PAU at Phillaur, Punjab, India. Subsequently, the validated model was used to estimate long-term mean and variability of potential yield (Y_p), drainage, runoff, evapo-transpiration (ET), crop water productivity (CWP), and irrigation water productivity (IWP) of wheat cv. PBW343 using 36 years (1970–1971 to 2005–2006) of historical weather data from Ludhiana. Seven sowing dates in fortnightly intervals, ranging from early October to early January, and three irrigation scheduling methods [soil water deficit (SWD)-based, growth stage-based, and ET-based] were evaluated. For the SWD-based scheduling, irrigation management depth was set to 75 cm with irrigation scheduled when SWD reached 50% to replace 100% of the deficit. For growth stage-based scheduling, irrigation was applied either only once at one of the key growth stages [crown root initiation (CRI), booting, flowering, and grain filling], twice (two stages in various combinations), thrice (three stages in various combinations), or four times (all four stages). For ET-driven irrigation, irrigations were scheduled based on cumulative net ETo (ETo-rain) since the previous irrigation, for a range of net ETo (25, 75, 125, 150, and 175 mm). Five main irrigation schedules (SWD-based, ET-driven with irrigation applied after accumulation of either 75 or 125 mm of ETo, i.e., ET75 or ET125, and growth stage-based with irrigation applied at CRI plus booting, or at CRI plus booting plus flowering stage) were chosen for detailed analysis of yield, water balance, and CWP and IWP. Nitrogen was non-limiting in all the simulations.Mean Y_p across 36 years ranged from 5.2 t ha⁻¹ (10 October sowing) to 6.4 t ha⁻¹ (10 November sowing), with yield variations due to seasonal weather greater than variations across sowing dates. Yields under different irrigation scheduling, CWP and IWP were highest for 10 November sowing. Yields and CWP were higher for SWD and ET75-based irrigations on both soils, but IWP was higher for ET75-based irrigation on sandy loam and for ET150-based irrigation on loam. Simulation results suggest that yields, CWP, and IWP of PBW343 would be highest for sowing between late October and mid-November in the Indian Punjab. It is recommended that sowing be done within this planting period and that irrigation be applied based on the atmospheric demand and soil water status and not on the growth stage. Despite the potential limitations recognised with simulation results, we can conclude that DSSAT-CSM-CERES-Wheat V4.0 is a useful decision support system to help farmers to optimally schedule and manage irrigation in wheat grown in coarse-textured soils under declining groundwater table situations of the Indian Punjab. Further, the validated model and the simulation results can also be extrapolated to other areas with similar climatic and soil environments in Asia where crop, soil, weather, and management data are available.     

Response of safflower (Carthamus tinctorius L.) to saline soils and irrigation: I. Consumptive water use

Salt-tolerant crops can be grown with saline water from tile drains and shallow wells as a practical strategy to manage salts and sustain agricultural production in the San Joaquin Valley (SJV) of California. Safflower (Carthamus tinctorius L.) was grown in previously salinized plots that varied in average electrical conductivity (EC_e) from 1.8 to 7.2 dS m⁻¹ (0–2.7 m depth) and irrigated with either high quality (EC_i<1 dS m⁻¹) or saline (EC_i=6.7 dS m⁻¹) water. One response of safflower to increasing root zone salinity was decreased water use and root growth. Plants in less saline plots recovered more water on average (515 mm) and at a greater depth than in more salinized plots (435 mm). With greater effective salinity, drainage increased with equivalent water application rates. Seed yield was not correlated with consumptive water use over the range of 400–580 mm. Total biomass and plant height at harvest were proportional to water use over the same range. Safflower tolerated greater levels of salinity than previously reported. Low temperatures and higher than average relative humidity in spring likely moderated the water use of safflower grown under saline conditions.     

Growth and yield of oleic sunflower (Helianthus annuus L.) under drip irrigation in very strongly saline soils

A four-year trial was set up to test the feasibility of growing oleic sunflower in a very strongly saline wasteland with drip irrigation in the Ningxia plain of Northwest China. The soil salinity expressed as electrical conductivity of the saturation paste extract (EC _e ) was around 28 dS/m, and soil nutrient was deficient in the upper 120 cm depth. The experiment included five soil matric potential (SMP) treatments, with the SMP at 20-cm depth immediately under the emitters maintained to be higher than ?5, ?10, ?15, ?20 and ?25 kPa after sunflower establishment. Drip irrigation consistently created a favourable soil moisture and low-salinity region in the root zone when the SMP was maintained higher than ?25 kPa. The sunflower dry seed yield decreased by 3.8 % for each unit increase in seasonal average soil salinity in the root zone. Plant vegetative growth, yield characteristics, irrigation frequency and irrigation amount all increased with the increase in SMP from ?25 to ?5 kPa, and the highest irrigation water use efficiency was available when the SMP was between ?10 and ?15 kPa (the amount of applied water was around 750 mm). Leaching of salts by drip irrigation gradually turned the very strongly saline soil into a moderately saline soil. This research suggests that drip irrigation can be successfully used in oleic sunflower cultivation in this highly saline soil and a SMP threshold between ?10 and ?15 kPa is suggested for irrigation scheduling.     

WaDI (water delivery for irrigation): A simulation tool to address strategic interaction of water demand and supply in irrigation schemes

The WaDI (water delivery for irrigation) model deals with the relations between the collective water supply and the demand within irrigated schemes. It is based on a separate modelling of the water supply and demand, including (i) a simplified representation of the hydraulic structure, characteristics and organizational parameters of the scheme, (ii) an assessment of the water demand of farms based on their total irrigated area, cropping pattern and irrigation practices, (iii) a farm typology, (iv) a confrontation between water demand and supply at each node of the scheme from pumping plants to tertiary canals, and (v) calculation of response factors between supply and demand during the peak demand period. “What-if” scenarios are simulated in order to enhance the stakeholders’ capacity to plan strategic decisions such as water delivery allocation rules or infrastructure investments. WaDI was implemented on two Brazilian schemes. It allowed broadening the stakeholders’ limited representation of collective water supply and demand into a more comprehensive understanding of these relations. The approach however showed some limits, along with the difficulty of assessing the real impact on the stakeholders’ capacity for strategic planning.     

Effect of saline water on cucumber (Cucumis sativus L.) yield and water use under drip irrigation in North China

Saline water has been included as an important substitutable resource for fresh water in agricultural irrigation in many fresh water scarce regions. In order to make good use of saline water for agricultural irrigation in North China, a semi-humid area, a 3-year field experiment was carried out to study the possibility of using saline water for supplement irrigation of cucumber. Saline water was applied via mulched drip irrigation. The average electrical conductivity of irrigation water (EC_iw) was 1.1, 2.2, 2.9, 3.5 and 4.2 dS/m in 2003 and 2004, and 1.1, 2.2, 3.5, 4.2 and 4.9 dS/m in 2005. Throughout cucumber-growing season, the soil matric potential at 0.2 m depth immediately under drip emitter was kept higher than −20 kPa and saline water was applied after cucumber seedling stage. The experimental results revealed that cucumber fruit number per plant and yield decreased by 5.7% per unit increase in EC_iw. The maximum yield loss was around 25% for EC_iw of 4.9 dS/m, compared with 1.1 dS/m. Cucumber seasonal accumulative water use decreased linearly over the range of 1.5-6.9% per unit increase in EC_iw. As to the average root zone EC_e (electrical conductivity of saturated paste extract), cucumber yield and water use decreased by 10.8 and 10.3% for each unit of EC_e increase in the root zone (within 40 cm away from emitter and 40 cm depths), respectively. After 3 years irrigation with saline water, there was no obvious tendency for EC_e to increase in the soil profile of 0-90 cm depths. So in North China, or similar semi-humid area, when there is no enough fresh water for irrigation, saline water up to 4.9 dS/m can be used to irrigate field culture cucumbers at the expense of some yield loss.     

Deficit irrigation and nitrogen effects on seed cotton yield, water productivity and yield response factor in shallow soils of semi-arid environment

A field experiment was conducted for 2 years to investigate the effects of deficit irrigation, nitrogen and plant growth minerals on seed cotton yield, water productivity and yield response factor. The treatment comprises six levels of deficit irrigation (Etc 1.0, 0.9, 0.8, 0.7, 0.6 and 0.5) and four levels of nitrogen (80, 120, 160 and 200 kg N ha⁻¹). These were treatments superimposed with and without plant growth mineral spray. Furrow irrigation treatments were also kept. Cotton variety Ankur-651 Bt was grown during 2006 and 2007 cotton season. Drip irrigation at 1.0 Etc saved 26.9% water and produced 43.1% higher seed cotton yield over conventional furrow irrigation (1.0 Etc). Imposing irrigation deficit of 0.8 Etc caused significant reduction in seed cotton yield to the tune of 9.3% of the maximum yield. Further increase in deficit irrigation from 0.7 Etc to 0.5 Etc significantly decreased seed cotton yield over its subsequent higher irrigation level. Decline in the yield under deficit irrigation was associated with reduction in number of bolls plant⁻¹ and boll weight. Nitrogen at 200 kg ha⁻¹ significantly increased mean seed cotton yield by 36.3% over 80 kg N ha⁻¹. Seed cotton yield tended to increase linearly up to 200 kg N ha⁻¹ with drip Etc 0.8 to drip Etc 1.0. With drip Etc 0.6-0.5, N up to 160 kg ha⁻¹ provided the highest yield, thereafter it had declined. Foliar spray of plant growth mineral (PGM) brought about significant improvement in seed cotton yield by 14.1% over control. The water productivity ranged from 0.331 to 0.491 kg m⁻³ at different irrigation and N levels. On pooled basis, crop yield response factor of 0.87 was calculated at 20% irrigation deficit.     

Regional analysis of irrigation water requirements using kriging: Application to potato crop (Solanum tuberosum L.) at Trás-os-Montes

Aiming at the analysis of the regional variation of potato crop irrigation water requirements over the Trás-os-Montes region, data from 106 rainfall stations and eight weather stations were utilized in an irrigation scheduling simulation model to estimate net irrigation water requirements of the potato crop. The simulation model was first validated using a field experiment which allows to derive the required crop data to be used in the simulations. The reference evapotranspiration (ET₀) was estimated using the FAO Penman–Monteith method. The model was applied to all 106 locations, each with a data set spanning a 19-year period. As a result of this application, series of the net irrigation water requirements for a 19-year period were obtained for each location. The resulting 106 point values of the net water requirements of the potato crop have been treated as a regionalized variable. The respective semivariograms have been computed and the kriging method then applied to estimate the spatial distribution of the water requirements in the region. Contour lines of this regionalized variable have been drawn using a GIS system. Results show an estimation error averaging 5% for the entire region.     

Photosynthesis, yield, and chemical composition of Tieguanyin tea plants (Camellia sinensis (L.) O. Kuntze) in response to irrigation treatments

Tieguanyin Oolong tea (Camellia sinensis (L.) O. Kuntze) is a name brand important commodity for Anxi county, Fujian province in China. Four-year-old tea plants at a tea plantation in Anxi were subjected to six different irrigation treatments (i.e. 5, 10, 15, 20, and 25 d irrigation intervals for T₁ to T₅ with a rate of 3.5 kg water per plant, plus a non-irrigated control). After 50 d of irrigation treatments, leaf water potential was −1.70, −2.34, −2.48, −2.89, −3.55, and −4.92 MPa for treatment T₁, T₂, T₃, T₄, T₅, and control, respectively. Leaf biomass yield increased by 32.8%, 21.9%, and 21.3% for T₁, T₂, and T₃, respectively, compared to control. The net photosynthesis (Pn), stomatal conductance (gs) and transpiration (E) decreased with irrigation interval increasing. Tea polyphenol (TP) and free amino acid (AA) decreased when the irrigation intervals were increased, but caffeine (CA) content apparently increased as the irrigation intervals were increased. To balance irrigation water demand and tea yield and quality, it is recommended that the irrigation interval should be set at 10 d with a rate of 3.5 kg water per plant for the optimal production in Anxi, Fujian province of China.     

Leaf,stolon and root growth of white clover (Trifolium repens L.) in response to irrigation with saline water

The effect of irrigation with water at salinity concentrations of 2.6 and 5.2 dS m^–1 on the growth of pure swards of six cultivars of white clover (Trifolium repens L.) was examined over three irrigation seasons at Tatura, Victoria, Australia. After two irrigation seasons, soil EC _e levels increased to 6 dS m^–1 at 0–60 cm depth in the higher salinity treatment resulting in highly significant (p < 0.001) reductions in shoot dry matter production, flowering densities and petiole and stolon densities. These saline conditions also increased (p <0.001) concentrations of Cl and Na in the shoots and reduced (p < 0.001) leaf water potentials and canopy photosynthetic efficiency rates especially at high temperatures. In contrast, root growth increased at shallow depths (0–15 cm) under both saline irrigation treatments (p <0.001). Cultivars differed significantly in salt tolerance (p < 0.001), with cultivars Haifa and Irrigation exhibiting superior tolerance in terms of lower reductions in herbage yield (p <0.05) and petiole densities (p <0.001) during one irrigation season and lower concentrations of Na and Cl in the shoots (p <0.05) compared with the other four cultivars (Aran, Kopu, Pitau and Tamar). In addition, canopy photosynthetic efficiency rates (A ^*) in plots irrigated with water at 5.2 dS m^–1 were higher in cultivar Haifa compared with cultivar Tamar (p <0.05). The salt tolerance ranking obtained for the six cultivars was in broad agreement with earlier greenhouse studies. Consequently, it appears that, while white clover is an extremely salt-sensitive species, it is possible to grow cultivars which display greater salt tolerance than other cultivars and which provide some scope to increase, or at least to maintain, pasture yields in areas where the soil salinity is low to moderate or where pumped saline groundwater is re-used for Irrigation.     

Effects of irrigation regimes on yield and water productivity of safflower (Carthamus tinctorius L.) under Mediterranean climatic conditions

A field study was carried out in order to determine the effect of deficit irrigation regimes on grain yield and seasonal evapotranspiration of safflower (Carthamus tinctorius L.) in Thrace Region of Turkey. The field trials were conducted on a loam Entisol soil, on Dincer, the most popular variety in the research area. A randomised complete block design with three replications was used. Combination of four well-known growth stages of the plant, namely vegetative (V_a), late vegetative (V_b), flowering (F) and yield formation (Y) were considered to form a total of 16 (including rain fed) irrigation treatments. The effect of irrigation and water stress at any stage of development on grain yield per hectare and 1000 kernels weight was evaluated. Results showed that safflower was significantly affected by water stress during the sensitive late vegetative stage. The highest yield was obtained in V_aV_bFY treatment. Seasonal irrigation water use and evapotranspiration were 501 and 721 mm, respectively, for the non-stressed treatment. Safflower grain yield of this treatment was 5.22 Mg ha⁻¹ and weight of 1000 kernels was 55 g. The seasonal yield-water response factor value was 0.87. The total water use efficiency was 7.2 kg ha⁻¹ mm⁻¹. Irrigation schedule of the non-stressed treatment may be as follows: the first irrigation is at the vegetative stage, when after 40-50 days from sowing/elongation and branching stage, that is the end of May; the second irrigation is at the late vegetative stage, after 70-80 days from sowing/heading stage, that is in the middle of June; the third irrigation is at the flowering stage, approximately 50% level, that is the first half of July; and the fourth irrigation is at the yield formation stage, seed filling, that is the last week of July.     

Water use and yield response of wheat to irrigation and nitrogen on an alluvial soil in North India

Field studies were conducted for four years on alluvial soils of North India to determine the water use, water use efficiency and yield performance of a semi-dwarf high-yielding wheat variety (Triticum aestivum L.) in response to irrigation schedule and nitrogen fertilization. Irrigation scheduling was based on different ratios between irrigation water and cumulative pan evaporation (IW/CPE). Irrigations of 6-cm depth were applied on the basis of IW/CPE ratio of 0.45, 0.60, 0.75 and 0.90. Pan evaporation data were recorded daily using standard USWB-Class A Open pan (as prescribed by India Meterological Department) located at Research Farm, Selakui, Dehradun where the experiment was conducted. The CPE values were computed for each year individually. The crop was fertilized with nitrogen at the rate of 0, 60 and 120 kg/ha.The yield and yield attributes were highest and irrigation efficiency was maximum when irrigation was applied at an IW/CPE ratio of 0.75 in a normal-rainfall year and at 0.90 in a low-rainfall year. Water use efficiency decreased with increase in irrigation frequency. Nitrogen fertilization increased the yield of wheat linearly and was maximum at 120 kg nitrogen per hectare.     

Irrigation with brackish water under desert conditions II. Physiological and yield response of maize (Zea mays) to continuous irrigation with brackish water and to alternating brackish-fresh-brackish water irrigation

The physiological behavior and yield response of maize under irrigation with saline water was studied in the laboratory and in the field. In the laboratory, the germination rate decreased only when the electrical conductivity (EC) of the substrate solution was above 17 dS/m. The osmotic potential of germinating maize seedlings decreased in proportion to the decrease in osmotic potential of the substrate.In the field, two maize cultivars (a field maize and a sweet maize) were irrigated alternately with saline (11 days from sowing), fresh (21 days from emergence), and saline (from day 33 to harvest) water and compared with maize irrigated with saline water continuously throughout the season. Four levels of irrigation water salinity were used (EC_i = 1.2, 4.5, 7.0 and 10.5 dS/m).In the field no osmotic adjustment by the leaf sheaths of plants in response to salinity was observed. The osmotic potential of corn leaf sheaths (π) decreased with ontogeny in all treatments. The midday leaf water potential (ψ_L) in maize irrigated with 10.5 dS/m water was 0.75 MPa lower than in plants irrigated with 1.2 dS/m water.In the continuous treatment grain yield was reduced significantly with each increase in salt concentration, and the relationship between relative yield (y) and EC_i could be expressed as y = 100?8.7 (EC_i-0.84). With alternating irrigation and 7.0 dS/m treatment the grain yield was the same as in the low EC treatment (6.98 kg/m²).     

Role of irrigation and mulch on yield, evapotranspiration rate and water use pattern of tomato (Lycopersicon esculentum L.)

Irrigation management strategy invites the quantification of crop response to irrigation frequencies. Conventionally, mulches increase the yield and water use efficiency (WUE) to a great extent by augmenting the water status in the root zone profile. A field study was carried out during the winter season (November-March) of 2003-2004 and 2004-2005 at the Central Research Farm of Bidhan Chandra Krishi Viswavidyalaya (Latitude 22°58′N, Longitude 88°31′E and altitude 9.75 m amsl), Gayeshpur, India, to evaluate the effect of irrigation frequencies and mulches on evapotranspiration rate from tomato crop field as well as leaf area index (LAI), fruit yield and WUE of the crop. The experiment was laid out in a split-plot design where three irrigation treatments {rainfed (RF); CPE₅₀ and CPE₂₅ where irrigation was given at 50 and 25 mm of cumulative pan evaporation (CPE)} were kept in the main plots and the subplots contained four mulch managements {no mulch (NM), rice straw mulch (RSM), white polyethylene mulch (WPM) and black polyethylene mulch (BPM)}. Under CPE₂₅, tomato crop recorded significantly higher leaf area index (LAI) over CPE₅₀ and rainfed condition. LAI value under BPM was 9-30% more over other mulches. Maximum variation of LAI among different treatments was recorded at 60 days after transplanting (DAT). Fruit yield under CPE₂₅ was 39.4 Mg ha⁻¹; a reduction of 7 and 30% has been obtained under CPE₅₀ and RF condition. The use of mulch increased 23-57% yield in comparison to NM condition. Actual evapotranspiration rate (ET_R) was 1.82 mm day⁻¹ under CPE₂₅ and declined by 15 and 31% under CPE₅₀ and RF condition, respectively. The variation of ET_R among different mulches became more prominent under maximum water stressed (RF) condition, whereas the variation was negligible under CPE₂₅ frequency. Irrespective of mulching WUE was highest under moderately wet (CPE₅₀) soil environment. Among different mulches, BPM was responsible for attaining the highest WUE value (25.1 kg m⁻³), which declined by 22, 21 and 39% under WPM, RSM and NM, respectively.     

Using a hydro-dynamic flow model to plan maintenance activities and improve irrigation water distribution: application to the Fordwah distributary in Punjab, Pakistan

In secondary canals in Pakistans Punjab, the waterdistribution depends on the hydraulic characteristicsof channels, cross-structures and tertiary outlets.Maintenance of channels and structures plays a crucialrole in upholding equitable distribution of water tothe tertiary units. In the past, maintenance has beenundertaken by irrigation managers based on experienceand observations. In the present study a hydro-dynamicmodel (SIC – Simulation of Irrigation Canals) is usedto assess a priori the impact of maintenance measureson water distribution. Maintenance measures can thusbe selected that remove existing bottlenecks in thewater distribution in the most cost-effective way. The methodology is applied to a secondary canal insouth-east Punjab. The simulation results show thatthe main cause of present inequity in waterdistribution are deviations in dimensions of tertiaryoutlets, which, if restored, would make the mosteffective contribution to improve the waterdistribution. Maintenance of the channel is necessaryif its capacity diminishes.     

Effect of different drip irrigation regimes on sugar beet (Beta vulgaris L.) yield, quality and water use efficiency in Middle Anatolian, Turkey

Agricultural production has forced researchers to focus on increasing water use efficiency by improving either new drought-tolerant plant varieties or water management for arid and semi-arid areas under water shortage conditions. A field study was conducted to determine effects of seasonal deficit irrigation on plant root yield, quality and water use efficiency (WUE) of sugar beet for a 2-year period in the semi-arid region. Irrigations were applied when approximately 50–55% of the usable soil moisture was consumed in the effective rooting depth at the full irrigation (FI) treatment. In deficit irrigation treatments, irrigations were applied at the rates of 75, 50 and 25% of full irrigation treatment on the same day. Irrigation water was applied by a drip irrigation system. Increasing water deficits resulted in a relatively lower root and white sugar yields. The linear relationship between evapotranspiration and root yield was obtained. Similarly, WUE was the highest in DI25 irrigation conditions and the lowest in full irrigation conditions. According to the averaged values of 2 years, yield response factor (k _y ) was 0.93 for sugar beet. Sugar beet root quality parameters were influenced by drip irrigation levels in both years. The results revealed that irrigation of sugar beet with drip irrigation method at 75% level (DI25) had significant benefits in terms of saved irrigation water and large WUE, indicating a definitive advantage of deficit irrigation under limited water supply conditions. In an economic viewpoint, 25% saving of irrigation water (DI25) caused 6.1% reduction in the net income.     

Effects of grapevine (Vitis vinifera L.) water status on water consumption, vegetative growth and grape quality: An irrigation scheduling application to achieve regulated deficit irrigation

Precision irrigation in grapevines could be achieved using physiologically based irrigation scheduling methods. This paper describes an investigation on the effects of three midday stem water potential (midday Ψ_S) thresholds, imposed from post-setting, over water use, vegetative growth, grape quality and yield of grapevines cv. Cabernet Sauvignon. An experiment was carried out on a vineyard located at the Isla de Maipo, Metropolitana Region, Chile, throughout the 2002/03, 2003/04 and 2004/05 growing seasons. Irrigation treatments consisted in reaching the following midday Ψ_S thresholds: −0.8 to −0.95 MPa (T1); −1.0 to −1.2 MPa (T2) and −1.25 to −1.4 MPa (T3) from post-setting to harvest. Results showed significant differences in grape quality components among treatments and seasons studied. In average, T3 produced smallest berry diameter (6% reduction compared to T1), high skin to pulp ratio (13% increment compared to T1) and significant increments in soluble solids and anthocyanins. Improvements in grape quality attributes were attributed to mild grapevine water stress due to significant reductions in water application (46% for T2 and 89% for T3 less in average, both compared to T1). This study found significant correlations between midday Ψ_S and berry quality components, no detrimental effects on yield by treatments were found in this study. This research proposes a suitable physiological index and thresholds to manage RDI and irrigation scheduling on grapevines to achieve high quality grapes on mild water stress conditions.     

Effects of climate on the yield response of two fescue species to water and nitrogen application

Summary The effect of three climatic parameters and their interaction with water and nitrogen treatments on the monthly yield of dry matter by two Fescue grass species was studied for four years in a replicated field experiment. Yields from plots receiving weekly irrigation and the heaviest rates of nitrogen application were linearly related to the total number of hours of bright sunshine during the growth period unless the minimum air humidity was below 40% and the maximum air temperature above 26° C. On a seasonal scale only the direct and interactive effects of water and nitrogen were significant.     

Spatial analysis of cotton (Gossypium hirsutum L.) canopy responses to irrigation in a moderately humid area

Accurate irrigation scheduling is important to ensure maximum yield and optimal water use in irrigated cotton. This study hypothesizes that cotton water stress in relatively humid areas can be detected from crop stress indices derived from canopy reflectance or temperature. Field experiments were conducted in the 2003 and 2004 crop seasons with three irrigation treatments and multiple cultivars to study cotton response to water stress. The experiment plots were monitored for soil water potential (SWP), canopy reflectance and canopy temperature. Four crop stress indices namely normalized difference vegetative index (NDVI), green NDVI (GNDVI), stress time (ST) index and crop water stress index (CWSI) were evaluated for their ability to indicate water stress. These indices were analyzed with classic mixed regression models and spatial regression models for split-plot design. Rainfall was plentiful in both seasons, providing conditions representative of irrigated agriculture in relatively wet regions. Under such wet weather conditions, excessive irrigation decreased lint yield, indicating the necessity for accurate irrigation scheduling. The four crop stress indices showed significant responses to irrigation treatments and strong correlation to SWP at shallow (0.2 m) depth. Spatial regression models were able to accurately explain the effect of irrigation treatment, while classic split-plot ANOVA models were confounded by collinearity in data across space and time. The results also verified that extreme humidity can mask canopy temperature differences with respect to ambient temperature, adding errors to canopy temperature-based stress indicators.

---