Stability of chitosan nanoparticles for L-ascorbic acid during heat treatment in aqueous solution

This study investigated the stability and characteristics of L-ascorbic acid (AA)-loaded chitosan (CS) nanoparticles during heat processing in aqueous solutions. AA-loaded CS nanoparticles were prepared by ionic gelation of CS with tripolyphosphate (TPP) anions. The smallest CS nanoparticles (170 nm) were obtained with a CS concentration of 1.5 mg/mL and a TPP concentration of 0.6 mg/mL. As the concentration of AA increased from 0.1 to 0.3 mg/mL, the particle size increased, while the zeta potential decreased, and the encapsulation efficiency of AA remained within a fixed range (10-12%). During heat processing at various temperatures, the size and zeta potential of the particles decreased rapidly in the first 5 min and then slowly fell to the regular range. At the beginning of the release profiles, the burst release-related stability of the surface increased with the temperature. Then, the release of the internal AA was constantly higher with a longer release time. Consequently, it was confirmed that the stability of AA-loaded CS nanoparticles was affected by temperature but that the internal stability was greater than the surface stability. These results demonstrate the stability of CS nanoparticles for AA during heat processing and suggest the possible use of AA-loaded CS nanoparticles to enhance antioxidant effects because of the continuous release of AA from CS nanoparticles in food processing.     

Development of zein nanoparticles coated with carboxymethyl chitosan for encapsulation and controlled release of vitamin D3

In this study, zein nanoparticles coated with carboxymethyl chitosan (CMCS) were prepared to encapsulate vitamin D3 (VD3). VD3 was first encapsulated into zein nanoparticles using a low-energy phase separation method and coated with CMCS simultaneously. Then, calcium was added to cross-link CMCS to achieve thicker and denser coatings. The nanoparticles with CMCS coatings had a spherical structure with particle size from 86 to 200 nm. The encapsulation efficiency was greatly improved to 87.9% after CMCS coating, compared with 52.2% for that using zein as a single encapsulant. The physicochemical properties were characterized by differential scanning calorimetry and Fourier transform infrared spectroscopy. Nanoparticles with coatings provided better controlled release of VD3 in both PBS medium and simulated gastrointestinal tract. Photostability against UV light was significantly improved after encapsulation. Encapsulation of hydrophobic nutrients in zein nanoparticles with CMCS coatings is a promising approach to enhance chemical stability and controlled release property.     

Heat-epimerized tea catechins rich in gallocatechin gallate and catechin gallate are more effective to inhibit cholesterol absorption than tea catechins rich in epigallocatechin gallate and epicatechin gallate

It has been known that tea catechins, (-)-epicatechin (1), (-)-epigallocatechin (2), (-)-epicatechin gallate (3), and (-)-epigallocatechin gallate (4) are epimerized to(-)-catechin (5), (-)-gallocatechin (6), (-)-catechin gallate (7), and (-)-gallocatechin gallate (8), respectively, during retort pasteurization. We previously reported that tea catechins, mainly composed of 3 and 4, effectively inhibit cholesterol absorption in rats. In this study, the effect of heat-epimerized catechins on cholesterol absorption was compared with tea catechins. Both tea catechins and heat-epimerized catechins lowered lymphatic recovery of cholesterol in rats cannulated in the thoracic duct and epimerized catechins were more effective than tea catechins. The effect of purified catechins on micellar solubility of cholesterol was examined in an in vitro study. The addition of gallate esters of catechins reduced micellar solubility of cholesterol by precipitating cholesterol from bile salt micelles. Compounds 7 and 8 were more effective to precipitate cholesterol than 3 and 4, respectively. These observations strongly suggest that heat-epimerized catechins may be more hypocholesterolemic than tea catechins.     

Analysis of acrylamide in green tea by gas chromatography-mass spectrometry

Optimization of the solid-phase extraction cleanup procedure enabled the GC-MS analysis of acrylamide in tea samples without the interference of bromination by tea catechins. Although polyvinylpolypyrrolidone (PVPP) is available for removing tea catechins from tea extract, the peaks derived from PVPP had the same retention time as brominated acrylamide in mass chromatograms obtained by GC-MS. A considerable amount of acrylamide was formed at roasting temperatures of > or =120 degrees C; the highest acrylamide level was observed when tea samples were roasted at 180 degrees C for 10 min. Higher temperatures and longer processing times caused a decrease in the acrylamide content. Furthermore, an analysis of 82 tea samples showed that rather than the reducing sugar content, the asparagine content in tea leaves was a significant factor related to acrylamide formation in roasted products. The acrylamide level in roasted tea products was controlled by asparagine in the presence of reducing sugars.     

Molecular dynamics study on the biophysical interactions of seven green tea catechins with lipid bilayers of cell membranes

Molecular dynamics simulations were performed to study the interactions of bioactive catechins (flavonoids) commonly found in green tea with lipid bilayers, as a model for cell membranes. Previously, multiple experimental studies rationalized catechin's anticarcinogenic, antibacterial, and other beneficial effects in terms of physicochemical molecular interactions with the cell membranes. To contribute toward understanding the molecular role of catechins on the structure of cell membranes, we present simulation results for seven green tea catechins in lipid bilayer systems representative of HepG2 cancer cells. Our simulations show that the seven tea catechins evaluated have a strong affinity for the lipid bilayer via hydrogen bonding to the bilayer surface, with some of the smaller catechins able to penetrate underneath the surface. Epigallocatechin-gallate (EGCG) showed the strongest interaction with the lipid bilayer based on the number of hydrogen bonds formed with lipid headgroups. The simulations also provide insight into the functional characteristics of the catechins that distinguish them as effective compounds to potentially alter the lipid bilayer properties. The results on the hydrogen-bonding effects, described here for the first time, may contribute to a better understanding of proposed multiple molecular mechanisms of the action of catechins in microorganisms, cancer cells, and tissues.     

Designed polar cosolvent-modified supercritical CO2 removing caffeine from and retaining catechins in green tea powder using response surface methodology

This study examines cosolvent-modified supercritical carbon dioxide (SC-CO2) to remove caffeine from and to retain catechins in green tea powder. The response surface method was adopted to determine the optimal operation conditions in terms of the extraction efficiencies and concentration factors of caffeine and catechins during the extractions. When SC-CO2 was used at 333 K and 300 bar, 91.5% of the caffeine was removed and 80.8% of catechins were retained in the tea: 3600 g of carbon dioxide was used in the extraction of 4 g of tea soaked with 1 g of water. Under the same extraction conditions, 10 g of water was added to <800 g of carbon dioxide in an extraction that completely removed caffeine (that is, the caffeine extraction efficiency was 100%). The optimal result as predicted by three-factor response surface methodology and supported by experimental data was that in 1.5 h of extraction, 640 g of carbon dioxide at 323 K and 275 bar with the addition of 6 g of water extracted 71.9% of the caffeine while leaving 67.8% of the catechins in 8 g of tea. Experimental data indicated that supercritical carbon dioxide decaffeination increased the concentrations of caffeine in the SC-CO2 extracts at 353 K.     

Adsorption behavior of the catechins and caffeine onto polyvinylpolypyrrolidone

Adsorbent is one of the most important factors for separation efficiency in fixed-bed purification techniques. The adsorption behavior of catechins and caffeine onto polyvinylpolypyrrolidone (PVPP) was investigated by static adsorption tests. The results showed that catechins rather than caffeine were preferred to adsorb onto PVPP since the adsorption selectivity coefficient of total catechins vs caffeine was around 22.5, and that adsorption of catechins could be described by the pseudo-second-order model. Adsorption amount of caffeine onto PVPP in green tea extracts solution was much higher than that in purified caffeine solution although the initial concentration of caffeine was similar in the two solutions, indicating the caffeine might be attached with catechins which were adsorbed by PVPP instead of being adsorbed by PVPP directly. The results also showed that the adsorption capacity of catechins and caffeine decreased with an increase in temperature, and that Freundlich and Langmuir models were both suitable for describing the isothermal adsorption of catechins, but not suitable for caffeine. The predicted maximum monolayer adsorption capacity of total catechins by PVPP was 671.77 mg g(-1) at 20 °C, which was significantly higher than that by other reported adsorbents. The thermodynamics analyses indicated that the adsorption of catechins onto PVPP was a spontaneous and exothermic physisorption process, revealing lower temperature was favorable for the adsorption of catechins. Elution tests showed that the desorption rates of catechins and caffeine were higher than 91% and 99% after two elution stages; in detail, almost all of the caffeine could be washed down at the water eluting stage, while catechins could be recovered at the dimethyl sulfoxide/ethanol solution eluting stage. Thus, the PVPP could be used as an excellent alternative adsorbent candidate for separating catechins from crude tea extracts, although some investigations, such as exploring the new eluants with low boiling point and high desorption efficiency, should be conducted furthermore.     

Factors affecting the levels of tea polyphenols and caffeine in tea leaves

An isocratic HPLC procedure was developed for the simultaneous determination of caffeine and six catechins in tea samples. When 31 commercial teas extracted by boiling water or 75% ethanol were analyzed by HPLC, the levels of (-)-epigallocatechin 3-gallate (EGCG), and total catechins in teas were in the order green tea (old leaves) > green tea (young leaves) and oolong tea > black tea and pu-erh tea. Tea samples extracted by 75% ethanol could yield higher levels of EGCG and total catechins. The contents of caffeine and catechins also have been measured in fresh tea leaves from the Tea Experiment Station in Wen-Shan or Taitung; the old tea leaves contain less caffeine but more EGCG and total catechins than young ones. To compare caffeine and catechins in the same tea but manufactured by different fermentation processes, the level of caffeine in different manufactured teas was in the order black tea > oolong tea > green tea > fresh tea leaf, but the levels of EGCG and total catechins were in the order green tea > oolong tea > fresh tea leaf > black tea. In addition, six commercial tea extracts were used to test the biological functions including hydroxyl radical scavenging, nitric oxide suppressing, and apoptotic effects. The pu-erh tea extracts protected the plasmid DNA from damage by the Fenton reaction as well as the control at a concentration of 100 microg/mL. The nitric oxide suppressing effect of tea extracts was in the order pu-erh tea >/= black tea > green tea > oolong tea. The induction of apoptosis by tea extract has been demonstrated by DNA fragmentation ladder and flow cytometry. It appeared that the ability of tea extracts to induce HL-60 cells apoptosis was in the order green tea > oolong > black tea > pu-erh tea. All tea extracts extracted by 75% ethanol have stronger biological functions than those extracted by boiling water.     

Kinetic study of the thermal stability of tea catechins in aqueous systems using a microwave reactor

Tea catechins may undergo complex reactions such as oxidation, polymerization, and epimerization during thermal processing. The thermal stability of tea catechins in an aqueous system, including degradation and epimerization reactions, was investigated using a microwave reactor. Reactions were controlled at high temperatures ranging from 100 to 165 degrees C with various durations up to 120 min. Three sources of tea catechins containing different levels of (-)-epigallocatechin gallate (EGCG), (-)-epicatechin gallate (ECG), and their epimers were studied. Kinetic models for the degradation/epimerization of tea catechins were developed and validated by the reactions at 145 degrees C. It was shown that the epimerization and degradation of tea catechins followed first-order reactions and the rate constants of reaction kinetics followed the Arrhenius equation. Values of the activation energy (E(a)) for the epimerization of EGCG from epi- to nonepi-structures, the epimerization of GCG from nonepi- to epi-structures, and the total degradation of EGCG and its epimer GCG were 117.6, 84.2, and 42.8 kJ/mol, respectively. For ECG and CG, the E(a) values were 119.3, 96.2, and 41.6 kJ/mol, respectively. The mathematical models may provide a useful prediction for the loss of tea catechins during any thermal processing.     

Molecular definition of black tea taste by means of quantitative studies, taste reconstitution, and omission experiments

Recently, bioresponse-guided fractionation of black tea infusions indicated that neither the high molecular weight thearubigens nor the theaflavins, but a series of 14 flavon-3-ol glycopyranosides besides some catechins, might be important contributors to black tea taste. To further bridge the gap between pure structural chemistry and human taste perception, in the present investigation 51 putative taste compounds have been quantified in a black tea infusion, and their dose-over-threshold (Dot) factors have been calculated on the basis of a dose/threshold relationship. To confirm these quantitative results, an aqueous taste model was prepared by blending aqueous solutions of 15 amino acids, 14 flavonol-glycosides, 8 flavan-3-ols, 5 theaflavins, 5 organic acids, 3 sugars, and caffeine in their "natural" concentrations. Sensory analyses revealed that the taste profile of this artificial cocktail did not differ significantly from the taste profile of the authentic tea infusion. To further narrow the number of key taste compounds, finally, taste omission experiments have been performed, on the basis of which a reduced recombinate was prepared containing the bitter-tasting caffeine, nine velvety astringent flavonol-3-glycosides, and the puckering astringent catechin as well as the astringent and bitter epigallocatechin-3-gallate. The taste profile of this reduced recombinate differed not significantly from that of the complete taste recombinate, thus confirming these 12 compounds as the key taste compounds of the tea infusion. Additional sensory studies demonstrated for the first time that the flavanol-3-glycosides not only impart a velvety astringent taste sensation to the oral cavity but also contribute to the bitter taste of tea infusions by amplifying the bitterness of caffeine.     

Role of polyphenol oxidase and peroxidase in the generation of black tea theaflavins.

It has been reported earlier that when macerated tea leaf is fermented at lower pH, the resultant black tea contains increased levels of theaflavin, an important quality marker in black tea. In an attempt to investigate the biochemistry and chemistry underlying this observation, in vitro oxidation experiments using polyphenol oxidase (PPO) from fresh tea leaves, horseradish peroxidase (POD), and tea catechins, precursors for theaflavins, were carried out. In vitro oxidation experiments using crude tea PPO resulted in higher content of theaflavins at pH 4.5 in comparison with pH 5.5, the normal pH of the macerated tea leaf. When purified PPO was used in the in vitro system, surprisingly a reversal of this trend was observed, with more theaflavins being formed at the higher pH. A combination of pure tea PPO and POD led to an observation similar to that with the crude enzyme preparation, suggesting a possible role for POD in the formation or degradation of theaflavin. POD was observed to oxidize theaflavins in the presence of H(2)O(2), leading to the formation of thearubigin, another black tea pigment. This paper demonstrates that tea PPO, while oxidizing catechins, generates H(2)O(2). The amount of H(2)O(2) produced is greater at pH 5.5, the optimum pH for PPO activity, than at pH 4.5. Hence, an observed increase of theaflavins in black teas fermented at pH 4.5 appears to be due to lower turnover of formed theaflavins into thearubigins.     

Temporal changes in aroma release of Longjing tea infusion: interaction of volatile and nonvolatile tea components and formation of 2-butyl-2-octenal upon aging

The temporal change in the headspace composition of an aroma model mimicking Longjing green tea aroma was studied in the presence of nonvolatile Longjing green tea constituents. Upon storage at 50 degrees C, the formation of 2-butyl-2-octenal was found, which increased with time. This enal was generated by crotonization of hexanal as demonstrated in model experiments. The formation of 2-butyl-2-octenal was also detected in Longjing tea infusions and Longjing tea leaves upon storage at 50 degrees C. The presence of nonvolatiles induced a strong decrease in aroma release. These effects were mainly due to catechins, major constituents of green tea infusion. Free amino acids, that is, glycine, contributed only to significantly decrease alpha,beta-unsaturated carbonyl aroma compounds, that is, 1-octen-3-one and geranial. Model reaction containing a mixture of 1-octen-3-one and glycine indicated on the basis of NMR and MS data the formation of the tentatively identified N-1-(3-oxo-octyl)glycine resulting from a 1,4-addition. The perceived aroma of green tea infusion is very likely to be affected by the formation of new aroma compounds and the changes in aroma release affected by interactions with tea nonvolatile components. This deserves further investigations on the sensory level.     

New phenolic components and chromatographic profiles of green and fermented teas

A standardized profiling method based on liquid chromatography with diode array and electrospray ionization mass spectrometric detection (LC-DAD-ESI/MS) was applied to establish the phenolic profiles of 41 green teas and 25 fermented teas. More than 96 phenolic compounds were identified that allowed the teas to be organized into five groups. Epigallocatechin gallate (EGCG) was the major phenolic component of green tea made from mature leaves (group 2), while green tea made from the younger buds and leaves (group 1) contained lower flavonoid concentrations. Partially fermented teas (group 3) contained one-half the EGCG content of the green tea. Fully fermented black teas (group 4) had a trace of EGCG, but contained theaflavins. Highly overfermented black tea (group 5) contained only trace amounts of flavonol glycosides and theaflavins. Over 30 phenolics are new for tea, and this is the first phenolic profile to simultaneously detect C- and O-glycosylated flavonoids, catechins, proanthocyanidins, phenolic acid derivatives, and purine alkaloids.     

Development of new antioxidant active packaging films based on ethylene vinyl alcohol copolymer (EVOH) and green tea extract

Ethylene vinyl alcohol copolymer (EVOH) films containing green tea extract were successfully produced by extrusion. The films were brown and translucent, and the addition of the extract increased the water and oxygen barrier at low relative humidity but increased the water sensitivity, the glass transition temperature, and the crystallinity of the films and improved their thermal resistance. An analysis by HPLC revealed that the antioxidant components of the extract suffered partial degradation during extrusion, reducing the content of catechin gallates and increasing the concentration of free gallic acid. Exposure of the films to various food simulants showed that the liquid simulants increased their capacity to reduce DPPH(?) and ABTS(?+) radicals. The release of green tea extract components into the simulant monitored by HPLC showed that all compounds present in the green tea extract were partially released, although the extent and kinetics of release were dependent on the type of food. In aqueous food simulants, gallic acid was the main antioxidant component released with partition coefficient values ca. 200. In 95% ethanol (fatty food simulant) the K value for gallic acid decreased to 8 and there was a substantial contribution of catechins (K in the 1000 range) to a greatly increased antioxidant efficiency. Kinetically, gallic acid was released more quickly than catechins, owing to its faster diffusivity in the polymer matrix as a consequence of its smaller molecular size, although the most relevant effect is the plasticization of the matrix by alcohol, increasing the diffusion coefficient >10-fold. Therefore, the materials here developed with the combination of antioxidant substances that constitute the green tea extract could be used in the design of antioxidant active packaging for all type of foods, from aqueous to fatty products, the compounds responsible for the protection being those with the higher compatibility with the packaged product.     

Metabolic dependence of green tea on plucking positions revisited: a metabolomic study

The dependence of global green tea metabolome on plucking positions was investigated through (1)H nuclear magnetic resonance (NMR) analysis coupled with multivariate statistical data set. Pattern recognition methods, such as principal component analysis (PCA) and orthogonal projection on latent structure-discriminant analysis (OPLS-DA), were employed for a finding metabolic discrimination among fresh green tea leaves plucked at different positions from young to old leaves. In addition to clear metabolic discrimination among green tea leaves, elevations in theanine, caffeine, and gallic acid levels but reductions in catechins, such as epicatechin (EC), epigallocatechin (EGC), epicatechin-3-gallate (ECG), and epigallocatechin-3-gallate (EGCG), glucose, and sucrose levels were observed, as the green tea plant grows up. On the other hand, the younger the green tea leaf is, the more theanine, caffeine, and gallic acid but the lesser catechins accumlated in the green tea leaf, revealing a reverse assocation between theanine and catechins levels due to incorporaton of theanine into catechins with growing up green tea plant. Moreover, as compared to the tea leaf, the observation of marked high levels of theanine and low levels of catechins in green tea stems exhibited a distinct tea plant metabolism between the tea leaf and the stem. This metabolomic approach highlights taking insight to global metabolic dependence of green tea leaf on plucking position, thereby providing distinct information on green tea production with specific tea quality.     

Analysis of tea shoot catechins: spectrophotometric quantitation and selective visualization on two-dimensional paper chromatograms using diazotized sulfanilamide.

A highly specific and sensitive diazotized sulfanilamide reagent is synthesized for determination of tea catechins. The reagent is employed both as spray reagent for selective visualization of tea catechins on two-dimensional paper chromatograms (sensitivity <1 microg of d-(+)-catechin) and for their spectrophotometric quantification in the crude extracts of tea polyphenols isolated from fresh or dried tea shoots. The formation of yellow color (lambda(max) = 425 nm) between catechins and diazotized sulfanilamide was investigated and made the basis of a simple and sensitive spectrophotometric method for estimation of the total and individual catechins in different tea cultivars. At 425 nm, the absorbance was linear (r = 0.999) over the (0.4-8.0 microg/mL) concentration range of d-(+)-catechin.     

Stability of tea catechins in the breadmaking process

A green tea extract (GTE) was incorporated into bread as a source of tea catechins. The stability of tea catechins in the breadmaking process including unfrozen and frozen dough was studied. A method was developed for the separation and quantification of tea catechins in GTE, dough, and bread samples using a RP-HPLC system. The separation system consisted of a C18 reversed-phase column, a gradient elution system of water/methanol and formic acid, and a photodiode array UV detector. Tea catechins were detected at 275 nm. GTEs at 50, 100, and 150 mg per 100 g of flour were formulated. The results obtained showed that green tea catechins were relatively stable in dough during freezing and frozen storage at -20 degrees C for up to 9 weeks. There were no further detectable losses of tea catechins in bread during a storage of 4 days at room temperature. It was also revealed that (-)-epigallocatechin gallate (EGCG) and (-)-epigallocatechin (EGC) were more susceptible to degradation than (-)-epicatechin gallate (ECG) and (-)-epicatechin (EC). (-)-EGCG and (-)-ECG were normally selected as the quality indices of green tea catechins, and their retention levels in freshly baked bread were ca. 83 and 91%, respectively. One piece of bread (53 g) containing 150 mg of GTE/100 g of flour will provide 28 mg of tea catechins, which is approximately 35% of those infused from one green tea bag (2 g).     

Preparation of a tea polyphenol nanoliposome system and its physicochemical properties

Tea polyphenol is rich in green tea with diverse biological activities. However, its application in the food industry is limited due to its instability toward oxygen and light. In this study, the preparation of tea polyphenol liposome by the thin film ultrasonic dispersion method was performed in order to enhance the bioavailability of tea polyphenol. The process conditions were optimized using response surface analysis, and the optimal parameters were as follows: ratio of tea polyphenol to lecithin, 0.125:1; ratio of lecithin to cholesterol, 4:1; phosphate buffered saline (PBS) pH, 6.62; ultrasonic time, 3.5 min. The theoretical and practical entrapment efficiency were 60.36% and 60.09 ± 0.69%, respectively. Furthermore, physicochemical properties including size distribution, zeta potential, permeability, infrared spectrum and in vitro release of liposomal formulations were determined. The mean size of tea polyphenol liposome was 160.4 nm, and the ζ-potential value was -67.2. The tea polyphenol liposome was formed by physical interaction, and the in vitro release process followed a first-order equation. The results indicated that the prepared tea polyphenol liposome was stable and suitable for more widespread application.