A Lateral Approach for Screw Repair in Lag Fashion of Spiral Third Metacarpal and Metatarsal Medial Condylar Fractures in Horses

Objective— To describe a lateral approach for screw fixation in lag fashion of simple spiral medial condylar fractures of the third metacarpus/metatarsus (MC3/MT3).
Study Design— Case series.
Animals— Thoroughbred racehorses (n=9).
Methods— Nondisplaced medial MC3/MT3 condylar fractures (3 thoracic, 6 pelvic limbs), with mean length 126 mm (range, 91–151 mm) were repaired by internal fixation, under general anesthesia, using multiple 4.5 mm cortical screws inserted in lag fashion from the lateral aspect of the limb, using radiographic or fluoroscopic guidance. Horses were recovered from anesthesia in half-limb casts; 7 unassisted and 2 using a rope-recovery system. Horses had 2 months box rest, 1 month in-hand walking, and follow-up radiographic examination at 3 months.
Results— Horses recovered uneventfully from anesthesia. Five horses raced; 1 returned to training, was persistently lame, and was retired to stud; 2 were retired directly to stud; and 1 horse was lost to follow-up.
Conclusions— MC3/MT3 medial condylar fractures were successfully repaired by screws inserted n lag fashion form the lateral aspect.
Clinical Relevance— Use of a lateral approach to medial condylar MC3/MT3 fractures allows screw insertion perpendicular to the fracture plane without interference with palmar/plantar soft tissue structures or from the splint bones. Although repair was performed under general anesthesia, the technique should be adaptable to application in standing horses.     

Patterns of scintigraphic uptake in the fetlock joint of Thoroughbred racehorses and the effect of increased radiopharmaceutical uptake in the distal metacarpal/tarsal condyle on performance

Reasons for performing study: The effect of palmar osteochondral disease lesions on performance of Thoroughbred (TB) racehorses is unclear. There is a need to describe patterns of radiopharmaceutical uptake (IRU) in fetlock joints of TB racehorses and to evaluate post scintigraphy performance. Hypotheses: IRU in the metacarpal (MC) and metatarsal (MT) condyles is more common than IRU in the parasagittal grooves and is associated with poorer post diagnosis performance than controls. Methods: Location of IRU within the fetlock region was identified and graded subjectively in TB racehorses. Performance variables were determined from race records for horses with moderate/marked MC/MT condylar IRU (cases), other horses undergoing scintigraphy (scintigraphy controls) and age/sex matched controls from the last race in which a case participated (controls). Statistical analyses included quantile regression, Fisher's exact test, Kaplan‐Meier survival curves, log‐rank test and Cox regression. Results: Metacarpal/MT condylar IRU was identified in 103/220 horses with only 3/220 having parasagittal IRU. Moderate/marked IRU was identified in the MC and MT condylar regions in 62 and 39 horses, respectively, with palmaromedial and plantarolateral IRU most common. Fore‐ and hindlimb cases had fewer starts, reduced earnings (P<0.001) and reduced earnings/start than controls respectively. Cases were more likely to return to racing later than controls following a rest period. Cases were older than scintigraphy controls. Conclusions: In TB racehorses presenting for lameness MC/MT condylar IRU is the most common abnormality identified within the fetlock joint. Racehorses with moderate/marked condylar IRU have a shortened racing career, are less successful than age/sex matched controls and are older than other racehorses presented for scintigraphy. Potential relevance: Overload of the MC/MT condyles is a common and significant problem in TB racehorses that is readily identified with scintigraphy. Scintigraphy of horses that are lame or performing poorly is less useful for screening for potential condylar fractures.     

A Lateral Approach to the Repair of Propagating Fractures of the Medial Condyle of the Third Metacarpal and Metatarsal Bone in 18 Racehorses

Objectives— To report the technique, observations on fracture configurations and results of treatment by fixation lag screw following the fracture plane determined by an approach to the third metacarpal/metatarsal bone (MC3/MT3) that begins laterally over the metacarpo(metatarso)phalangeal joint and extends dorsally over the diaphysis of the bone.
Study Design— Case series.
Animals— Thoroughbred horses (n=18) with propagating fractures of the medial condyle of MC3/MT3.
Methods— Retrospective analysis of case records of horses with fractures of the medial condyle of MC3/MT3 that propagated sagittaly or in a spiral configuration into the diaphysis, repaired surgically under general anesthesia by screw fixation in lag fashion through a lateral approach with periosteal reflection.
Results— Fractures were readily identified at surgery, enabling screw fixation in lag fashion following the fracture plane. Fracture configurations varied and could be classified as sagittal and spiral fractures with fractures within each group generally following a similar course. All horses recovered relatively uneventfully from general anesthesia and surgery, and all fractures healed well. Thirteen horses returned to training; 5 subsequently raced.
Conclusions— Repair of propagating sagittal and spiral fractures of the medial condyle of MC3/MT3 with diaphyseal involvement, through a lateral approach with periosteal reflection permits stable fixation with minimal complications. In this series there were no catastrophic failures.
Clinical relevance— Fractures of the medial condyle of MC3/MT3 that propagate either sagittaly or in a spiral configuration into the diaphysis can be successfully repaired with screw fixation in lag fashion using a lateral approach with periosteal reflection.     

Low-field standing magnetic resonance imaging findings of the metacarpo/metatarsophalangeal joint of racing Thoroughbreds with lameness localised to the region: a retrospective study of 131 horses

Reasons for performing study: The metacarpo/metatarsophalangeal (MCP/MTP) joint is a common site of lameness in the Thoroughbred racehorse. Radiographs may fail to show pathology consistent with the degree of lameness. With a high incidence of stress fractures occurring in the distal third metacarpal/metatarsal (MC3/MT3) condyles and proximal phalanx, a definitive diagnosis as to the nature of the pathology is essential. Objective: To describe the low‐field magnetic resonance imaging (MRI) findings in Thoroughbred racehorses with MCP/MTP joint pain scanned under standing sedation. Methods: The MR images and clinical records of all Thoroughbred racehorses undergoing MRI of the MCP/MTP joint between October 2006 and August 2010 were reviewed. A total of 168 joints from 131 horses were selected for inclusion. The MRI finding considered most significant in the lame (or lamest) limb was noted. Results: Diagnostic quality images were obtainable in 97.8% of horses. The most common finding was palmar/plantar osteochondral disease in MC3/MT3 (54.9% of horses). Incomplete condylar fracture was diagnosed in 19.8% of horses, with the lateral condyle predominating. An incomplete sagittal fracure of P1 was diagnosed in 14.5% of horses and 11.4% were diagnosed with ‘dorsal joint disease’. Other findings included transverse MC3 stress fractures (1.5%), soft tissue injuries (12.2%) and proximal phalangeal ‘contusions’ (3.8%). No significant bone/soft tissue injury was detected in 5.4% of cases. Conclusions: Standing MRI can detect a spectrum of disease within the MCP/MTP joints of racehorses. The procedure is well tolerated and may lead to a definitive diagnosis where radiographic imaging is inconclusive. Potential relevance: A total of 35.8% of cases had MRI findings consistent with fracture pathology, which could not be confirmed radiographically at the time of the MRI examination. This has important therapeutic and prognostic implications and may help to prevent catastrophic injury.     

Results of treatment of 145 fractures of the third metacarpal/metatarsal condyles in 135 horses (1986-1994).

The objectives of this study were to correlate condylar fracture characteristics and type of treatment with subsequent capacity for athletic ability, and to determine the characteristics of healing that affect prognosis after fracture fixation. Medical records, post operative radiographic studies and race records were examined for 135 horses sustaining 145 fractures. Sixty-five percent of horses overall started in a race post injury (SPI) in a mean time of 9.7 months with a mean of 13.7 races post injury. Having raced pre-injury did not confer an advantage to starting post injury, though nonstarters pre-injury tended to take longer to return. For horses starting pre- and post injury, 66% improved or maintained their race class level after injury, whereas 64.2% decreased their race earnings post injury. Eighty-five percent of the fractures received internal fixation, of which 70% were complete fractures. Eighty-seven percent of horses with incomplete-nondisplaced fractures treated conservatively raced post injury. The percent SPI for incomplete-nondisplaced, complete-nondisplaced and complete-displaced fractures treated with internal fixation were 74%, 58%, and 60%, respectively. Males (72%) raced post injury more frequently than fillies (53%), and may represent a truer probability of SPI. Spiral fractures tended to take longer until their first start (mean 13.3 months). Fifty-two percent of horses with articular fragments were able to race post injury. Horses were more likely to start if 2-4 month radiographic healing revealed no evidence of the fracture except the presence of lag screws. Based on this series of cases, the majority of horses, with proper treatment, were able to return to racing regardless of fracture characteristic. Prognosis appeared to be affected by the severity of the injury to the joint, the presence of articular comminution and the quality of surgical repair.     

Surgical Repair of Metacarpal Condylar Fractures with Palmar Osteochondral Comminution in Two Thoroughbred Horses

Complete displaced lateral condylar fractures of the metacarpus with triangular osteochondral fragments at the palmar articular surface occurred in two Thoroughbred horses. The condylar fractures were repaired with cortical bone screws following removal of the osetochondral fragments via a dorsal arthrotomy and distraction of the condyles. One horse raced successfully after surgery, and the other is being used successfully as an English pleasure mount.     

A Biomechanical Comparison of Headless Tapered Variable Pitch and AO Cortical Bone Screws for Fixation of a Simulated Lateral Condylar Fracture in Equine Third Metacarpal Bones

OBJECTIVE: To compare drilling, tapping, and screw-insertion torque, force, and time for the 4.5-mm AO and 6.5-mm Acutrak Plus (AP) bone screws, and to compare the mechanical shear strength and stiffness of a simulated complete lateral condylar fracture of the equine third metacarpal bone (MC3) stabilized with either an AO or AP screw. STUDY DESIGN: In vitro biomechanical assessment of screw-insertion variables, and shear failure tests of a bone-screw-stabilized simulated lateral condylar fracture. SAMPLE POPULATION: Eight pairs of cadaveric equine MC3s METHODS: Metacarpi were placed in a fixture and centered on a biaxial load cell in a materials-testing system to measure torque, compressive force, and time for drilling, tapping, and screw insertion. Standardized simulated lateral condylar fractures were stabilized by either an AO or AP screw and tested in shear until failure. A paired t test was used to assess differences between screws, with significance set at P < .05. RESULTS: Insertion and mechanical shear testing variables were comparable for AO and AP insertion equipment and screws. CONCLUSION: The 6.5-mm tapered AP screw can be inserted in equine third metacarpal condyles and is mechanically comparable with the 4.5-mm AO screw for fixation of a simulated lateral condylar fracture. CLINICAL RELEVANCE: Considering the comparable mechanical behavior, the potential for less-persistent soft-tissue irritation with the headless design, and the ability to achieve interfragmentary compression by inserting the screw in one hole drilled perpendicular to the fracture plane, the 6.5-mm tapered AP screw may be an attractive alternative for repair of incomplete lateral condylar fractures in horses.     

Biomechanical investigation of the association between suspensory ligament injury and lateral condylar fracture in thoroughbred racehorses

Objective-To determine whether partial transection of the medial branch of the suspensory ligament (MBSL) alters equine third metacarpal bone (MC3) condylar surface strains and forelimb, distal joint angles in a manner consistent with promotion of lateral condylar fracture. Study Design-In vitro biomechanical experiment. Sample Population-Right forelimbs from 7 Thoroughbred horse cadavers. Methods-Lateral and medial MC3 condylar, dorsal and abaxial, bone surface strains and distal joint angles were measured both before and after partial transection of the MBSL during in vitro axial limb compression. Dorsal, principal bone strains and abaxial, uniaxial, and proximodistal strains were compared before and after MBSL partial transection at 1,400-, 3,000-, and 5,600-N loads. Results-Bone strains increased in all locations with increasing axial load. All lateral condylar bone strains were significantly higher, and abaxial surface medial condylar bone strain was significantly lower, after partial transection of the MBSL. Respective distal joints became more flexed or extended as axial load increased but were not significantly different after partial transection of the MBSL. Conclusions-Partial transection of the MBSL increases in vitro MC3 lateral condylar bone surface strains. Clinical Relevance-Loss of integrity of the medial branch of the suspensory ligament could increase the risk for lateral condylar fracture in Thoroughbred horses by amplifying bone strain in the lateral condyle.     

Scanning electron microscopic examination of third metacarpal/third metatarsal bone failure surfaces in thoroughbred racehorses with condylar fracture

OBJECTIVE : To examine the fracture failure surfaces from Thoroughbred horses that had sustained a catastrophic condylar fracture. SAMPLE POPULATION : Bone specimens from the failure surface were obtained from 12 Thoroughbred racehorses with catastrophic injury and 2 non-racing horses with accidental long bone fracture. METHODS : Bone specimens from the failure surface of each fracture were incubated with gold microspheres to label microcracks before examination at x50 to x60,000 using scanning electron microscopy. Microcracking at the failure surface was assessed using a visual analog scale. RESULTS : Branching arrays or clusters of microcracks were seen over a range of magnifications in adapted subchondral bone in the distal end of the MC3/MT3 bone from racing Thoroughbreds with a catastrophic displaced condylar fracture. In the palmar/plantar region, microcracking was associated with the formation of an array of macroscopic cracks in the condylar groove. A different pattern of microcracking was seen in specimens of bone from distal metaphyseal and diaphyseal MC3/MT3 failure surfaces from Thoroughbred racehorses with catastrophic fracture and non-racing horses with an accidental diaphyseal long bone fracture. Few microcracks were seen and typically did not form branching arrays. CONCLUSION : These data suggest that propagation of condylar fracture in Thoroughbred racehorses is initiated by the formation of nanoscale microcracks in adapted subchondral bone that form during exercise-induced bone adaptation. CLINICAL RELEVANCE : Accumulation and coalescence of branching microcracks into arrays or clusters appears to eventually lead to the development of macroscopic subchondral cracks in the condylar groove and initiation of a condylar fracture.     

A biomechanical comparison of equine third metacarpal condylar bone fragment compression and screw pushout strength between headless tapered variable pitch and AO cortical bone screws

OBJECTIVES: To compare bone fragment compression and the mechanical pushout strength and stiffness of 6.5-mm Acutrak Plus (AP) and 4.5-mm AO cortical (AO) bone screws after stabilization of a simulated equine third metacarpal (MC3) bone complete lateral condylar fracture. STUDY DESIGN: In vitro biomechanical paired study of screw insertion variables, bone fragment compression, and screw pushout tests using a bone screw stabilized simulated lateral condylar fracture model. SAMPLE POPULATION: Six pairs of cadaveric equine MC3s. METHODS: Metacarpi were placed in a fixture and centered on a biaxial load cell in a materials testing system to measure torque, compressive force, and time for drilling, tapping, and screw insertion. Fragment compression was measured with a pressure-sensing device placed between the simulated fracture fragments during screw insertion for fragment stabilization. Subsequently, screws were pushed out of the stabilized bone fragments in a single cycle to failure. A paired t test was used to assess differences between site preparation, screw insertion, fragment compression, and screw pushout variables, with significance set at P <.05. RESULTS: Measured drilling variables were comparable for AO and AP specimens. However, the AP tap had significantly greater insertion torque and force. Mean maximum screw insertion torque was significantly greater for AO screws. For fragment compression, AP screws generated 65% and 44% of the compressive pressure and force, respectively, of AO screws. AP screws tended to have higher overall pushout strength. Pushout stiffness was similar between both screw types. CONCLUSION: The 6.5-mm tapered AP screw generated less interfragmentary compressive pressure and force but had similar pushout stiffness. Evaluation of failure patterns demonstrated that AP screws had greater pushout strength compared with 4.5-mm AO screws for fixation of a simulated complete lateral condylar fracture. CLINICAL RELEVANCE: The 6.5-mm tapered AP screw should provide ample holding strength but would provide less interfragmentary compression than 4.5-mm AO screws for repair of complete lateral condylar fractures in horses.     

Factors associated with racing performance of Thoroughbreds undergoing lag screw repair of condylar fractures of the third metacarpal or metatarsal bone

OBJECTIVE: To evaluate effects of sex, fracture configuration, affected limb, and screw placement on outcome of Thoroughbreds with condylar fractures involving the third metacarpal or metatarsal bone. DESIGN: Cohort study. Animals-56 horses. PROCEDURE: Age, sex, affected limb, fracture configuration, fracture length, fracture fragment width, and distance of the most distal screw from the articular surface were analyzed in logistic regression models. RESULTS: Females were more likely to have displaced fractures and race in fewer races after surgery than males. Sex and fracture configuration were associated with number of postoperative races. Among horses that returned to racing, those with thicker fracture fragments were 11 times as likely as horses with thinner fracture fragments to win a race after surgery. Horses with longer fractures and older horses had fewer postoperative races. Horses in which the most distal screw had been placed further from the joint surface had more races. CONCLUSIONS AND CLINICAL RELEVANCE: Results suggest that female horses with displaced condylar fractures and male horses with nondisplaced condylar fractures are more likely to be referred for treatment. The effect of sex on outcome for these horses cannot be clearly separated from the effect of fracture configuration. When adjusted for fracture configuration, males were 6 times as likely as females to race after surgery. When adjusted for sex, horses with nondisplaced fractures were 17 times as likely as horses with displaced fractures to race after surgery. Results suggest that the most distal screw should be placed above the epicondylar fossa.     

RADIOGRAPHIC EVALUATION OF THE PALMAR ASPECT OF THE EQUINEMETACARPAL CONDYLES: A NEW PROJECTION*

A New radiographic projection of the equine thrid metacarpal bone condyles and developed to aid detection and evaluation of ulcerative cartilaginous and osseous lesions on the MC III Papmar aspect. The most sccessful projection tried was a nonweight-bearing one with the leg extended. Subsequent clinical evaluation proved this projection to be significant in confirming and further delineating palmar lesions seen on weight-bearing lateromedial and flexed lateromedial radiographs. The new projection has also proved valuable in the complete evaluation of vertical MC III condylar fractures. It makes possible detection of fracture comminution at the condylar articular surface, fractures which cannot be seen on other projections.     

Stress reactions and stress fractures of the proximal palmar aspect of the third metacarpal bone in horses: 58 cases (1980-1990).

The case records, radiographs, and nuclear bone scans of 58 horses with stress reactions or stress fractures of the proximal palmar aspect of the third metacarpal bone (MC3) were reviewed. There were 47 Standardbreds, 4 Quarter Horses, 3 Thoroughbreds, 2 Arabians, 1 Oldenburg, and 1 Pony of America. Fifty-six of the horses were racehorses or performance horses. The mean and median ages of affected horses were 4 and 3 years, respectively. Lameness ranged from mild to severe. Physical findings were usually subtle and included signs of pain on deep palpation of the proximal palmar aspect of MC3 and slight effusion of the middle carpal joint in some cases. Lameness was commonly improved by high palmar and palmar metacarpal nerve blocks or anesthesia of the middle carpal joint. Fifty-three horses had higher than normal radiopharmaceutical uptake in the proximal palmar aspect of MC3 in the left or right limb. The other 5 horses had higher than normal radiopharmaceutical uptake bilaterally. Fifty-six of the 63 limbs with abnormal bone scans also had abnormal radiographs. Treatment consisted of a variable period of rest (1 to 6 months). Healing was best assessed by follow-up bone scans. Of the 45 horses for which follow-up information was adequate, 29 (64%) returned to their previous level of performance.     

Compressive Forces Achieved in Simulated Equine Third Metacarpal Bone Lateral Condylar Fractures of Varying Fragment Thickness with Acutrak Plus Screw and 4.5 mm AO Cortical Screws

Objectives— To compare compression pressure (CP) of 6.5 mm Acutrak Plus (AP) and 4.5 mm AO cortical screws (AO) when inserted in simulated lateral condylar fractures of equine 3rd metacarpal (MC3) bones. Study Design— Paired in vitro biomechanical testing. Sample Population— Cadaveric equine MC3 bones (n=12 pair). Methods— Complete lateral condylar osteotomies were created parallel to the midsagittal ridge at 20, 12, and 8 mm axial to the epicondylar fossa on different specimens grouped accordingly. Interfragmentary compression was measured using a pressure sensor placed in the fracture plane before screw placement for fracture fixation. CP was acquired and mean values of CP for each fixation method were compared between the 6.5 mm (AP) and 4.5 mm (AO) for each group using a paired t‐test within each fracture fragment thickness group with statistical significance set at P<.05. Results— AO screw configurations generated significantly greater compressive pressure compared with AP configurations. The ratio of mean CP for AP screws to AO screws at 20, 12, and 8 mm, were 21.6%, 26.2%, and 34.2%, respectively. Conclusion— Mean CP for AP screw fixations are weaker than those for AO screw fixations, most notably with the 20 mm fragments. The 12 and 8 mm groups have comparatively better compression characteristics than the 20 mm group; however, they are still significantly weaker than AO fixations. Clinical Relevance— Given that the primary goals of surgical repair are to achieve rigid fixation, primary bone healing, and good articular alignment, based on these results, it is recommended that caution should be used when choosing the AP screw for repair of lateral condylar fractures, especially complete fractures. Because interfragmentary compression plays a factor in the overall stability of a repair, it is recommended for use only in patients with thin lateral condyle fracture fragments, as the compression tends to decrease with an increase in thickness.     

Incomplete palmar fracture of the proximal extremity of the third metacarpal bone in horses: ten cases (1981-1986)

In 4 adult horses, simple, nondisplaced, incomplete fracture of the proximal extremity of the third metacarpal bone (MC3) was identified radiographically only on the dorsopalmar projection. Lameness was slight to moderate. Although nerve blocks of the foot and fetlock did not alter the lameness, high palmar regional nerve block improved the gait in 1 of the 2 horses on which it was performed. Pain on palpation or swollen distal accessory (inferior check) ligament, flexor tendons, and suspensory ligament were not found in any horse. The fracture was localized to the palmar surface of the proximal extremity of the MC3 on the basis of the intense uptake of radiopharmaceutical (99MTc-labeled sodium medronate) observed in that area during the soft tissue and delayed bone phases of a nuclear scintigraphic examination (nuclear scan) performed concurrently with radiography. Of 4 horses evaluated 6 months after the initial diagnosis, 3 had medullary sclerosis without radiographic evidence of fracture; results of follow-up nuclear scintigraphy performed in one of these horses at the same time were normal. Incomplete fracture also was suspected in another 6 adult horses with clinical lameness referable to the proximal extremity of the MC3. Although a fracture line could not be seen radiographically, trabecular hypertrophy and/or medullary sclerosis of the proximal extremity of the MC3 were detected on the dorsopalmar projection. Further, during nuclear scintigraphy, an intense uptake of the radiopharmaceutical was observed on the palmar aspect of the proximal extremity of the MC3 in all 6 horses.(ABSTRACT TRUNCATED AT 250 WORDS)     

Arthroscopic approaches to the palmar aspect of the equine carpus

OBJECTIVE: To identify sites for arthroscopic access to the palmar aspects of the antebrachiocarpal (AC) and middle carpal (MC) joints, and describe visible carpal bone surfaces for each approach. STUDY DESIGN: Prospective experimental study. ANIMALS: Equine carpi: 16 cadavers, 8 live horses. METHODS: A latex model was used to identify possible sites for arthroscopic access to the palmar aspects of the AC and MC joints. Carpi (n = 24) were examined arthroscopically and arthroscopic access sites and visible carpal bone surfaces were described. RESULTS: Arthroscopic approaches and instrument portals were developed for the medial and lateral aspects of the palmar pouches of the AC and MC joints. The palmar surface of the radial carpal bone and radius, and the dorsal articular surfaces of the accessory carpal bone, could be viewed using palmar approaches to the AC joint. The palmar aspect of the radial, third and second carpal bones (medially) and ulnar and fourth carpal bones (laterally) could be observed using a palmar approach to the MC joint. CONCLUSIONS: Arthroscopic access, using separate medial and lateral portals to the AC and MC joints, allowed assessment of portions of the caudodistal radius, the palmar surfaces of the radial, ulnar, second, third and fourth carpal bones, and the dorsal aspect of the accessory carpal bone. CLINICAL RELEVANCE: Arthroscopic approaches to the palmar aspect of the carpus could be used to remove fracture fragments, and to assess the medial palmar intercarpal ligaments.     

Structural variation of the distal condyles of the third metacarpal and third metatarsal bones in the horse

This study examined 3-dimensional (3D) distribution of sectors with contrasting density in the equine third metacarpal (McIII) and third metatarsal (MtIII) bones with a view to explaining the aetiology of distal condylar fractures. Macroradiography and computed tomographic (CT) imaging were used in the nondestructive study of bones obtained from horses, most of which were Thoroughbreds in race training. Distal condylar regions of McIII and MtIII were also studied in microradiographs of 100 microm thick mediolateral sections cut perpendicular to the dorsal and palmar/plantar articular surfaces. Qualitative and quantitative results from all methods used (radiography, CT and microradiographic stereology) demonstrated a densification (sclerosis) of subchondral bone located in the palmar/plantar regions of the medial and lateral condyles of both McIII and MtIII. Substantial density gradients between the denser condyles and the subchondral bone of the sagittal groove were shown to equate with anatomical differences in loading intensity during locomotion. It is hypothesised that such differences in bone density results in stress concentration at the palmar/plantar aspect of the condylar grooves, which may predispose to fracture.     

Single condylar fractures of the distal femur in the dog

Nine dogs with single condylar fractures of the distal femur are described. In eight of the nine animals the medial condyle had fractured. Trauma is important in the production of this fracture as seven of the nine affected animals had a clinical history of having been suspended by the affected leg and struggling to free it. Clinically, pain and collapse of the medial compartment of the joint were the most obvious features. Confirmation of diagnosis was obtained by radiography. In the case of fracture of the medial condyle a lateral view showing caudal displacement of the condyle was most useful. Once identified the condyle was replaced surgically using combinations of pins and screws. Secure fixation allowed healing of the fracture and a successful outcome.