Nitrogen,Phosphorus and Potassium Interactions in Upland Rice

Upland rice is an important crop in South America, including Brazil. Nutrient interactions are important in determining crop yields. A greenhouse experiment was conducted to evaluate interaction among nitrogen (N), phosphorus (P), and potassium (K) in upland rice production. The treatments applied to upland rice grown on an Oxisol were three levels of N (N₀, N₁₅₀ and N₃₀₀ mg kg^?1), three levels of P (P₀, P₁₀₀ and P₂₀₀ mg kg^?1) and three levels of K (K₀, K₁₀₀ and K₂₀₀ mg kg^?1). These treatments were tested in a 3 × 3 × 3 factorial arrangement. Grain yield, shoot dry weight, plant height, root dry weight, maximum root length, panicle number, 1000-grain weight, and grain harvest index were significantly influenced by N, P, and K treatments. The treatment that did not receive P fertilization did not produce panicle or grain. Hence, P was most yield-limiting nutrient compared to two other nutrients. At the N₀P₀K₀ treatment, rice did not produce grains, indicating severe deficiency of these nutrients in Brazilian Oxisols. Maximum grain yield was obtained with the N₃₀₀P₂₀₀K₂₀₀ treatment. Grain yield had significant positive association with plant height, shoot dry weight, root dry weight, maximum root length, 1000-grain weight, panicle number, and grain harvest index. Among these growth and yield components, shoot dry weight had the highest positive association with grain yield and root length minimum positive association with grain yield. Hence, adopting adequate soil and crop management practices can improve growth and yield components and increase grain yield of upland rice.     

Comparative Efficiency of Phosphorus Sources for Upland Rice Production

Rice (Oryza sativa L.) is a staple food for more than 50% of the world’s population, and phosphorus (P) is one of the most yield-limiting nutrients for rice production in tropical acidic soils worldwide. A greenhouse experiment was conducted to evaluate efficiency of six P sources for upland rice production. The P sources used were simple superphosphate (SSP), polymer-coated SSP (PSSP), triple superphosphate (TSP), polymer-coated TSP (PTSP), monoammonium phosphate (MAP), and polymer-coated MAP (PMAP). There were four P rates [50, 100 200, and 400 mg phosphorus (P) kg^?1] applied with four sources plus one control treatment [0 mg phosphorus (P) kg^?1]. Plant height, straw yield, grain yield, panicle density, root dry weight, maximum root length, and 1000-grain weight were significantly increased with increasing P rates in the range of 0 to 400 mg P kg^?1. However, P-use efficiency (mg grain produced per mg P applied) was decreased with increasing P rate. Based on regression equation, overall maximum plant height was obtained with the application of 235 mg P kg^?1, maximum straw yield with the application of 265 mg P kg^?1, and maximum grain yield at 227 mg P kg^?1. Based on maximum grain yield, the P source were classified as PMAP > SSP = MAP > PSSP > TSP > PTSP in the upland rice production efficiency. Overall, maximum panicle density was obtained with the addition of 231 mg P kg^?1 and maximum 1000-weight was obtained with the addition of 226 mg P kg^?1. Similarly, overall root dry weight and maximum root length were achieved with the application of 261 and 298 mg P kg^?1 of soil. Most of the growth and yield components had a significant positive association with grain yield. Optimum soil acidity indices such as pH; exchangeable calcium (Ca), magnesium (Mg), and potassium (K); Ca, Mg, and K saturation; base saturation; and acidity saturation were established for maximum upland rice grain yield.     

Agronomic Evaluation of Phosphorus Sources in Lowland Rice Production

Phosphorus (P) deficiency is one of the most yield-limiting factors in lowland rice production on Brazilian Inceptisol. The objective of this study was to evaluate eight P sources for lowland rice production. The P sources were simple superphosphate (SSP), polymer-coated simple superphosphate (PSSP), ammoniated simple superphosphate (ASSP), polymer-coated ammoniated simple superphosphate (PASSP), triple superphosphate (TSP), polymer-coated triple superphosphate (PTSP), monoammonium phosphate (MAP), and polymer-coated monoammonium phosphate (PMAP). These P sources were applied in four rates (i.e., 50, 100 200, and 400 mg P kg^?1) + one control treatment (0 mg P kg^?1). Plant height, straw yield, grain yield, panicle number, and root dry weight were significantly increased in a quadratic fashion with increasing P levels from 0 to 400 mg kg^?1 of all the P sources evaluated. However, overall maximum root length and P-use efficiency were significantly less at greater P levels. Based on regression equation, maximum plant height was obtained with 262 mg P kg, maximum straw yield was obtained with 263 mg P kg^?1, maximum grain yield was obtained with 273 mg P kg^?1, and maximum panicle density was obtained with 273 mg P kg^?1. Plant growth and yield components had significant positive association with grain yield, except maximum root length. Based on grain yield and average P rate of maximum grain yield, which is 273 mg kg^?1, P sources were classified for P-use efficiency in the order of PSSP = TSP > PTSP > PASSP > SSP > MAP > ASSP. Soil chemical properties [pH; P; potassium (K); calcium (Ca); magnesium (Mg); hydrogen (H) + aluminum (Al); cation exchange capacity (CEC); base saturation; Ca, Mg, and K saturation; acidity saturation; Ca/Mg, Ca/K, and Mg/K ratios] changed significantly with the addition of different P treatments.     

Sulfur Use Efficiency in Soybean Cultivars Adapted to Tropical and Subtropical Conditions

Sulfur (S) is an essential nutrient in crop plants and one of the components of amino acids (AAs) and proteins. Studies about sulfur efficiency on soybean cultivars [Glycine max (L) Merril] adapted to the tropical and subtropical conditions are still incipient. In Brazil, one experiment under greenhouse conditions evaluated the S-efficiency from eight soybean cultivars. The plants cultivated in a Typic Quartzipsamment received two S rates (0 and 80 mg kg^?1). The grain yield (GY), shoot dry weight (SDW), and the relative yield (RY) had influence from the S rates. The cultivars BRS 295RR and BRS 360RR were the most efficient in using the S application. The number of pods per plant (NPP), photosynthetic rate (A), nitrate reductase (N-NO₂^?), and chlorophyll significantly increased with de 80 mg kg^?1 of S. By contrast, the internal concentration of carbon dioxide (CO₂) (Ci) was reduced. Similarly, there were increases in the concentration of nitrogen (N), phosphorus (P), magnesium (Mg), and N:S ratio in the leaves and grain, but the K increased only in the leaves. Comparing the cultivars, only the N concentration in the leaves and the Mg in the grain had non-significant differences.     

Comparative Efficiency of Nitrogen Sources for Lowland Rice Production

Rice (Oryza sativa L.) is the staple food for more than 50% world population and nitrogen (N) is one of the most yield-limiting nutrients for rice production worldwide. A greenhouse experiment was conducted to evaluate the efficiency of three N sources for lowland rice production. The N sources used were ammonium sulfate, common urea, and polymer-coated urea. There were three N rates, i.e. 100, 200, and 400 mg N kg^?1 applied with three sources plus one control treatment (0 mg N kg^?1). Growth, yield, and yield components were significantly increased either in a linear or quadratic fashion with the addition of N fertilizers in the range of 0–400 mg kg^?1 soil. Maximum grain yield was obtained with the addition of ammonium sulfate at 100, 200, and 400 mg kg^?1 of soil. Common urea and polymer-coated urea were more or less similar in grain production at 100 and 200 mg N kg^?1. However, at 400 mg N kg^?1 treatments, polymer-coated urea produced the lowest grain yield. Most of the growth and yield components were positively related to grain yield, except spikelet sterility which was negatively related to grain yield. Nitrogen use efficiency decreased with increasing N rate in all the three N sources. Maximum N use efficiency was obtained with the addition of ammonium sulfate at lower as well as at higher N rates compared with other two N sources.     

Yield,Yield Components,Soil Chemical Properties,Plant Physiology,and Phosphorus Use Efficiency in Soybean Genotypes

Expansion of soybean [Glycine max (L.) Merrill] cultivated in Brazil to regions with low fertility soils gave rise to studies on the possibility of obtaining highly productive cultivars with high nutrient use efficiency. An experiment in greenhouse conditions was conducted to assess phosphorus (P) use efficiency (PUE) by 13 soybean genotypes. The genotypes were grown in an Ustoxix Quartzipsamment with two P rates [0 (no P application) and 150 mg P kg^?1], whose source was monoammonium phosphate (MAP, P₂O₅ 44%). Shoot dry weight (SDW), grain yield (GY), grain harvest index (GHI), relative yield (RY), and physiological components (photosynthetic rate, stomatal conductance, respiratory rate, and internal CO₂ concentration) were influenced by soybean genotypes and P rates. Genotypes BMX Apolo RR, BRS 360RR, BRS 378RR, CD 219RR, DM 2302RR, TMG 7161RR, and Vtop RR were classified as non-efficient and non-responsive to P application, while BMX Potência RR, Vmax RR, FPS Solar RR, NA 5909RR, TMG 1066RR, and M 6210 IPRO were classified as efficient and responsive. Phosphorus application increased the values of physiological components, which was not observed for N, K, Ca, Mg, and S concentration in the leaves and grains. Soybean genotypes selection for increased P efficiency could help growers overcome the problem of soybean cultivation on new areas or degraded pastures.     

Response of common bean varieties to the magnesium application in the tropical soil

The appropriate supply of magnesium (Mg) to the common bean (Phaseolus vulgaris L.) according to the requirements of each variety increases the productivity and nutritional value of grains. However, there are few studies on soil's ability to provide the adequate amount of the nutrient and on the reaction of plants with different Mg concentrations. The present study analyzed the response of the common bean plant to soil fertility, grain yield (GY), shoot dry weight (SDW) yield, nutritional status and the response of physiological components of the plant to the concentrations of Mg applied to the tropical soil. Thus, an experiment was conducted in a completely randomized design, in 5 × 4 factorial arrangement, with three replicates. The varieties BRS Estilo, IAPAR 81, BRS Ametista, IPR Campos Gerais (CG) and IPR Tangará were cultivated in an Ustoxix Quatzipsamment with five rates of Mg [0, 50, 100, and 200 mg kg^?1, source magnesium chloride (MgCl₂)]. The common bean varieties and the Mg rates significantly affected the soil chemical properties. Photosynthetic rate, stomatal conductance, transpiration rate, intercellular concentration of carbon dioxide (CO₂), and total soluble sugars significantly correlated with common bean GY and SDW yield. The nutrient content in leaves and grains showed difference responses among the varieties. IAPAR 81 showed the highest rate of mobilization of nitrogen, phosphorus, magnesium, sulfur, boron, copper and zinc (N, P, Mg, S, B, Cu, and Zn) for grains, being an important factor in studies of crop biofortification.     

Root Growth,Nutrient Uptake,and Nutrient-Use Efficiency by Roots of Tropical Legume Cover Crops as Influenced by Phosphorus Fertilization

Roots are important organs that supply water and nutrients to growing plants. Data related to root growth and nutrient uptake by tropical legume cover crops are limited. The objective of this study was to evaluate root growth of tropical legume cover crops and nutrient uptake and use efficiency under different phosphorus (P) levels. The P levels used were 0 (low), 100 (medium), and 200 (high) mg kg^?1 of soil, and five cover crops were evaluated. Root dry weight, maximum root length, and specific root length were significantly influenced by P and cover crop treatments. Maximum values of these root growth parameters were achieved with the addition of 100 mg P kg^?1 soil. The P?×?cover crops interactions for all the macro- and micronutrients, except manganese (Mn), were significant, indicating variation in uptake pattern of these nutrients by cover crops with the variation in P rates. Overall, uptake pattern of macronutrients was in the order of nitrogen (N) > calcium (Ca) > potassium (K) > magnesium (Mg) > P and micronutrient uptake pattern was in the order of iron (Fe) > Mn > zinc (Zn) > copper (Cu). Cover crops which produced maximum root dry weight also accumulated greater amount of nutrients, including N, compared to cover crops, which produced lower root dry weight. Greater uptake of N compared to other nutrients by cover crops indicated that use of cover crops in the cropping systems could reduce loss of nitrate (NO₃ ^?) from soil–plant systems. Increase in root length and root dry weight with the addition of P can improve nutrient uptake from the soil and lessen loss of macro- and micronutrients from the soil–plant systems.     

Phosphorus Nutrition of Upland Rice,Dry Bean,Soybean, and Corn Grown on an Oxisol

Rice, dry bean, corn, and soybean are important food crops. Phosphorus (P) deficiency is one of the most yield-limiting factors for these crops grown on highly weathered Brazilian Oxisols. Four greenhouse experiments were conducted to determine P requirements of these four crops. The P levels used were 0, 50, 100, 200, and 400 mg kg^?1. Growth, yield, and yield components evaluated of four crop species were significantly increased with the application of P fertilization. Most of the responses were quadratic in fashion when the P was applied in the range of 0 to 400 mg kg^?1. Maximum grain yield of upland rice was obtained with the application of 238 mg P kg^?1 of soil, maximum dry bean grain yield was obtained with the application of 227 mg P kg^?1 of soil, and maximum grain yield of soybean was obtained with the application of 224 mg P kg^?1 of soil. Maximum shoot growth of corn was obtained with the addition of 323 mg P kg^?1 of soil. Most of the growth and yield components had significant positive association with grain yield or shoot dry weight. Phosphorus concentration and uptake were greater in the grain compared to straw in upland rice and dry bean plants. Overall, P-use efficiencies decreased with increasing P rates.     

Zinc,Copper, Boron and Iron Requirement of Upland Rice Grown on a Brazilian Oxisol

Deficiency of micronutrients increasing in field crops, including upland rice in recent years. The objective of this study was to determine requirement of zinc (Zn), copper (Cu) boron (B) and iron (Fe) for upland rice grown on a Brazilian Oxisol. The levels used were: Zn (0, 10, 20, 40, and 80 mg kg^?1), Cu (0, 5, 10, 20 and 40 mg kg^?1), B (0, 5, 10, 20 and 40 mg kg^?1) and Fe (0, 250, 500, 1000, and 2000 mg kg^?1). Plant height, straw yield, grain yield, panicle number and grain harvest index (GHI) were significantly improved with the addition of these micronutrients. Root growth was also improved with the application of micronutrients, except with the addition of B. Maximum grain yield was obtained with the addition of 51 mg Zn, 24 mg Cu, 5 mg B kg^?1, and 283 mg Fe kg^?1 soil. Similarly, maximum straw yield was obtained with the addition of 38 mg Zn, 17 mg Cu, 6 mg B kg^?1, and 1500 mg Fe kg^?1 soil. Maximum plant height was obtained with the addition of 54 mg Zn, 10 mg B kg^?1, and 1197 mg Fe kg^?1 soil. Copper did not affect plant height significantly. Maximum panicle number was obtained with the addition of 22 mg Cu kg^?1, 3 mg B kg^?1, and 1100 mg Fe kg^?1 soil. Zinc did not affect panicle number significantly. Maximum GHI was obtained with the addition of 61 mg Zn kg^?1, and 8 mg B kg^?1. Zinc was had a linear increase in GHI in the range of 0 to 80 mg kg^?1, and Fe showed a negative relationship with GHI.     

MAIZE RESPONSE TO YIELD AND YIELD TRAITS WITH DIFFERENT NITROGEN AND DENSITY UNDER CLIMATE VARIABILITY

To study yield and yield traits of maize, two experiments were conducted in 2006 as spring and summer crops and repeated in 2007. Three plant populations (43, 53, and 67 thousands ha^-1) and three nitrogen (N) rates (90, 120 and 150 kg N ha^-1) were compared in a completely randomized block design with split plot arrangement. The treatments plant population was assigned to the main and N to sub plots in three replications. Sowing of spring crop was done in March and harvested in July and likewise the summer crop in July and harvested in November. Each experimental unit comprised of 5 × 6 m area having eight rows spaced 0.75 m. Experimental results revealed that grain yield (GY) of summer was higher than spring season. Higher GY was associated with increases in the plant population and nitrogen rate. The treatment plant population of 53,000 and 67,000 ha^-1 did not differ. However, each increase in the N rate significantly increased GY. This increase in the GY by increasing N was due to increases in the ear length (EL), ear diameter (ED), grain number (GN) and thousand grain weight (TGW). Increasing plant population of maize did not show any remarkable changes in the yield traits. The study revealed that differences in GY due to seasonal climate cannot be rewarded with increase in either plant population or nitrogen rates. Moreover, spring and summer season maize crops can economically be planted with 150 and 120 kg N ha^?1 at 53,000 and 67,000 ha^?1 populations, respectively, to save environment and production cost.     

Root growth,nutrient uptake and use efficiency by roots of tropical legume cover crops as influenced by phosphorus fertilization

The root is an important organ which supplies water and nutrients to growing plants. Data related to root growth and nutrient uptake by tropical legume cover crops are limited. The objective of this study was to evaluate root growth of tropical legume cover crops and nutrient uptake and use efficiency under different phosphorus (P) levels. The P levels used were 0 (low), 100 (medium) and 200 (high) mg kg^?1 of soil and 5 cover crops were evaluated. Root dry weight, maximum root length, specific root length were significantly influenced by P and cover crop treatments. Maximum values of these root growth parameters were achieved with the addition of 100 mg P kg^?1 soil. The P X cover crops interaction for all the macro and micronutrients, except manganese (Mn) was significant, indicating variation in uptake pattern of these nutrients by cover crops with the variation in P rates. Overall, uptake pattern of macronutrients was in the order of nitrogen>calcium>potassium>magnesium>phosphorus (N > Ca > K > Mg > P) and micronutrient uptake pattern was in the order of iron>manganese>zinc>copper (Fe > Mn > Zn > Cu). Cover crops which produced maximum root dry weight also accumulated higher amount of nutrients, including N compared to cover crops which produced lower root dry weight. Higher uptake of N compared to other nutrients by cover crops indicated that use of cover crops in the cropping systems can reduce loss of nitrate (NO₃^?) from soil-plant systems. Increase in root length and root dry weight with the addition of P can improve nutrient uptake from the soil and less loss of macro and micronutrients from the soil-plant systems.     

Potassium Requirements of Lowland Rice

Rice is a staple food for about 50 percent of the world’s population. Potassium (K) is absorbed in large amounts by rice plants and adequate amounts of this element are fundamental to improve productivity and maintain sustainability of the cropping systems. A greenhouse experiment was conducted to determine the adequate rate of K for lowland rice grown on a Brazilian Inceptisol. The K rates used were 0, 50, 100, 200, 400, and 600 mg K kg^?1 soil. Most of the growth, yield, and yield components were significantly and quadratically increased with increasing K levels. Based on a quadratic equation, maximum grain yield was obtained with the addition of 371 mg K kg^?1 soil. Maximum plant height and shoot dry weight were obtained at 414 and 398 mg K kg^?1 soil, respectively. Root growth (maximum length and dry weight) was also significantly increased in a quadratic fashion with the increasing K rate in the growth medium. Maximum root length was achieved at 58 mg K kg^?1 whereas maximum root dry weight was obtained with the addition of 394 mg K kg^?1 soil. Plant height, shoot dry weight, 1000-grain weight, root length, and root dry weight were significantly associated with grain yield. Hence, manipulation of these growth and yield components with the addition of K fertilizer can improve yield of lowland rice in varzea soils of central part of Brazil. Potassium uptake increased significantly in a quadratic fashion with increasing K rate. However, K-use efficiency (mg grain per mg K applied) decreased significantly with increasing K rate in a quadratic fashion. Maximum grain yield was obtained with 117 mg kg^?1 Mehlich 1–extractable K, base saturation of 53 percent, Mg saturation of 9 percent, K saturation of 2 percent, and Ca/Mg ratio of 4.     

Yield,yield components,soil fertility,and nutritional status of soybean as influenced by limestone and copper interactions

Abstract

Continuous limestone application can inhibit the copper (Cu) uptake by plants. This experiment was carried out in greenhouse conditions using two soils (Typic Oxisol and Typic Entisol) with different clay and soil organic matter (SOM) levels to evaluate the effects of liming on Cu fertilization. The treatments consisted of two dolomitic limestone rates (0 and 7.5?g per pot, equivalent to 0 and 5.0?Mg ha^?1) and five Cu rates (0, 2, 4, 8, and 16?mg kg^?1). Regardless of the soil type, the limestone and Cu rate interaction did not affect the grain yield (GY), however, they did increase the productivity, shoot dry weight yield (SDWY), number of grains per pod, number of pods per pot, pod weight per pot, weight of 100 seeds, root volume, photosynthetic rate, and chlorophyll, and Ca, Mg, and Cu contents in the soil and leaves. It was concluded that for soybeans cultivated in Typic Entisol and Typic Oxisol, there was no association between 5.0?Mg ha^?1 of limestone and the Cu rates. However, in isolation, limestone and Cu rate caused a significant increase in the soybean productivity, physiological components, and yield characteristics.     

Efficiency of Magnesium Use by Common Bean Varieties Regarding Yield,Physiological Components,and Nutritional Status of Plants

The magnesium (Mg) use efficiency in the selection of common bean (Phaseolus vulgaris L.) varieties may contribute to increased nutritional status and grain yield. Therefore, the present study aimed to assess common bean varieties following the application of Mg regarding productivity (yield), soil fertility, physiological components, and nutritional status. The experiment was conducted in a completely randomized design in a 5 × 2 factorial scheme with three replicates. Five common bean varieties [BRS Estilo, IPR Tangará, IPR Campos Gerais (CG), IAPAR 81, and BRS Ametista] supplemented with two Mg concentrations [low (0 mg kg^?1) and high (100 mg kg^?1)] using magnesium chloride (MgCl₂) as a source in an Ustoxix Quatzipsamment were assessed. The yield of shoot dry weight (SDW) and grains varied significantly between varieties and Mg rates. The high Mg concentration has negatively affected the yield of SDW and grains of variety IPR Tangará, and the opposite was observed for the other varieties. The physiological components associated with photosynthesis are directly related to the yield of SDW and grains. The concentrations of phosphorus (P), calcium (Ca), sulfur (S), and boron (B) in leaves and of S, B, iron (Fe), and manganese (Mn) in grains differed among the varieties and interactions of rates and varieties for B, indicating the presence of genetic factors in nutrient uptake.     

YIELD AND YIELD COMPONENTS OF UPLAND RICE AS INFLUENCED BY NITROGEN SOURCES

Ammonium sulfate and urea are main sources of nitrogen (N) for annual crop production in developing countries. Two greenhouse experiments were conducted using ammonium sulfate and urea as N sources for upland rice grown on a Brazilian Oxisol. The N rates used were 0, 50, 100, 150, 3000, and 400 kg N kg^?1 of soil. Yield and yield components were significantly increased in a quadratic fashion with increasing N rate. Ammonium sulfate X urea interaction was significant for grain yield, shoot dry matter yield, panicle number, plant height and root dry weight, indicating a different response magnitude of these plant parameters to two sources of N. Based on regression equation, maximum grain yield was achieved with the application of 380 mg N kg^?1 by ammonium sulfate and 271 mg N kg^?1 by urea. Grain yield and yield components were reduced at higher rates of urea (>300 mg kg N) but these plant parameters’ responses to ammonium sulfate at higher rates was constant. In the intermediate N rate range (125 to 275 mg kg^?1), urea was slightly better compared to ammonium sulfate for grain yield. Grain yield was significantly related with plant height, shoot dry weight, panicle number, grain harvest index and root dry weight. Hence, improving these plant characteristics by using appropriate soil and plant management practices can improve upland rice yield.     

Eucalyptus biochar application enhances Ca uptake of upland rice,soil available P,exchangeable K,yield, and N use efficiency of sugarcane in a crop rotation system

It was hypothesized that the application of eucalyptus biochar enhances nutrient use efficiencies of simultaneously supplied fertilizer, as well as provides additional nutrients (i.e., Ca, P, and K), to support crop performance and residual effects on subsequent crops in a degraded sandy soil. To test this hypothesis, we conducted an on‐farm field experiment in the Khon Kaen province of Northeastern Thailand to assess the effects of different application rates of eucalyptus biochar in combination with mineral fertilizers to upland rice and a succeeding crop of sugarcane on a sandy soil. The field experiment consisted of three treatments: (1) no biochar; (2) 3.1 Mg ha^?1 biochar (10.4 kg N ha^?1, 3.1 kg P ha^?1, 11.0 kg K ha^?1, and 17.7 kg Ca ha^?1); (3) 6.2 Mg ha^?1 biochar (20.8 kg N ha^?1, 6.2 kg P ha^?1, 22.0 kg K ha^?1, and 35.4 kg Ca ha^?1). All treatments received the same recommended fertilizer rate (32 kg N ha^?1, 14 kg P ha^?1, and 16 kg K ha^?1 for upland rice; 119 kg N ha^?1, 21 kg P ha^?1, and 39 kg K ha^?1 for sugarcane). At crop harvests, yield and nutrient contents and nitrogen (N) use efficiency were determined, and soil chemical properties and pH₀ monitored. The eucalyptus biochar material increased soil Ca availability (117 ± 28 and 116 ± 7 mg kg^?1 with 3.1 and 6.2 Mg ha^?1 biochar application, respectively) compared to 71 ± 13 mg kg^?1 without biochar application, thus promoting Ca uptake and total plant biomass in upland rice. Moreover, the higher rate of eucalyptus biochar improved CEC, organic matter, available P, and exchangeable K at succeeding sugarcane harvest. Additionally, 6.2 Mg ha^?1 biochar significantly increased sugarcane yield (41%) and N uptake (70%), thus enhancing N use efficiency (118%) by higher P (96%) and K (128%) uptake, although the sugar content was not increased. Hence, the application rate of 6.2 Mg ha^?1 eucalyptus biochar could become a potential practice to enhance not only the nutrient status of crops and soils, but also crop productivity within an upland rice–sugarcane rotation system established on tropical low fertility sandy soils.     

Optimal Acidity Indices for Soybean Production in Brazilian Oxisols

Soybean is an important crop for the Brazilian economy, and soil acidity is one of the main yield-limiting factors in Brazilian Oxisols. A field experiment was conducted during three consecutive years with the objective to determine soybean response to liming grown on Oxisols. Liming rates used were 0, 3, 6, 12, and 18 Mg ha^?1. Liming significantly increased grain yield in a quadratic trend. Ninety percent maximum economic grain yield (2900 kg ha^?1) was achieved with the application of about 6 Mg lime ha^?1. Shoot dry weight, number of pods per plant, and 100-grain weight were also increased significantly in a quadratic fashion with increasing liming rate from 0 to 18 Mg ha^?1. These growth and yield components had a significant positive association with grain yield. Maximum contribution in increasing grain yield was of number of pods per plant followed by grain harvest index and shoot dry weight. Uptake of nitrogen (N) was greatest and phosphorus (P) was least among macronutrients in soybean plant. Nutrient-use efficiency (kg grain per kg nutrient accumulation in grain) was maximum for magnesium (Mg) and lowest for N among macronutrients. Application of 3 Mg lime ha^?1 neutralized all aluminum ions in soil solution. Optimal acidity indices for 90% of maximum yield were pH 6.0, calcium (Ca) 1.6 cmol_c kg^?1, Mg 0.9 cmol_c kg^?1, base saturation 51%, cation exchange capacity (CEC) 4.8 cmol_c kg^?1, Ca/Mg ratio 1.9, Ca?/?potassium (K) ratio 5.6, and Mg/K ratio 3.0.     

The effect of potassium on yield,nutrient uptake and efficiency of teff (Eragrostis tef Zucc. Trotter) on vertisols of North Western Ethiopian Highlands

Vertisols are characterized by deficiency of nutrients and recently, potassium (K), a major plant nutrient in crops, is gaining attention because of crop removal, fixation by clay minerals and leaching. A field experiment was conducted during the 2015 and 2016 main cropping seasons to test the effect of potash fertilizer on Vertisols of East Gojjam at Gudalima and Dejen/Tik sites using teff crop. The K rates (applied as muriate of potash) were 0, 50,100, and 150?kg ha^?1. The experiment was laid out in a randomized complete block design in three replications. The results indicated that the plant height, panicle length, number of effective tillers, dry matter and grain yield of teff increased significantly (P?<?0.05) with applied K. The highest dry matter and grain yield (6966.4 and 2418.2 kg ha^?1, respectively) were obtained from the application of 100 kg ha^?1 KCl. Total uptake of N, P, and K were enhanced significantly with K treated plots than those without and K efficiency was improved due to the rate of K. The present study demonstrated the importance of K application to supplement NPS for optimum dry matter and grain yield of teff on Vertisols of the study sites.     

Effect of Nitrogen on the Alleviation of Boron Toxicity in Rice (Oryza Sativa L.)

Pot experiments were conducted in the greenhouse on a calcareous soil to study effect of nitrogen (N) on the alleviation of boron (B) toxicity in rice. The treatments consisted of factorial combination of six levels of B (0, 2.5, 5, 10, 20, and 40 mg kg^?1 as boric acid), and four levels of N (0, 75, 150, and 300 mg kg^?1 as urea) in a completely randomized design with three replicates. Boron addition (higher than 2.5 mg kg^?1) significantly reduced the seeds yield. Nitrogen addition alleviated the growth suppression effects caused by B supplements. Yield was increased by application of 2.5 mg B kg^?1 at all N levels, but at higher levels, B significantly decreased the yield of rice. Boron concentration declined with increasing N levels. Boron application increased the concentrations of B, potassium, phosphorous (P), and zinc. Nitrogen application decreased the concentration of Zn and increased the concentration of N and P.