YIELD AND YIELD COMPONENTS OF UPLAND RICE AS INFLUENCED BY NITROGEN SOURCES

Ammonium sulfate and urea are main sources of nitrogen (N) for annual crop production in developing countries. Two greenhouse experiments were conducted using ammonium sulfate and urea as N sources for upland rice grown on a Brazilian Oxisol. The N rates used were 0, 50, 100, 150, 3000, and 400 kg N kg^?1 of soil. Yield and yield components were significantly increased in a quadratic fashion with increasing N rate. Ammonium sulfate X urea interaction was significant for grain yield, shoot dry matter yield, panicle number, plant height and root dry weight, indicating a different response magnitude of these plant parameters to two sources of N. Based on regression equation, maximum grain yield was achieved with the application of 380 mg N kg^?1 by ammonium sulfate and 271 mg N kg^?1 by urea. Grain yield and yield components were reduced at higher rates of urea (>300 mg kg N) but these plant parameters’ responses to ammonium sulfate at higher rates was constant. In the intermediate N rate range (125 to 275 mg kg^?1), urea was slightly better compared to ammonium sulfate for grain yield. Grain yield was significantly related with plant height, shoot dry weight, panicle number, grain harvest index and root dry weight. Hence, improving these plant characteristics by using appropriate soil and plant management practices can improve upland rice yield.     

Agronomic Evaluation of Coated and Common Urea in Upland Rice Production

Two greenhouse experiments were conducted simultaneously to evaluate polymer-coated and common urea in upland rice production. The nitrogen (N) levels used for both the N sources were from 0 to 400 mg kg^?1 of soil. Maximum grain yield was obtained with the addition of 167 mg N kg^?1 polymer-coated urea and 238 mg N kg^?1 common urea. Maximum value of other plant traits was obtained with N applied from 233 to 313 mg kg^?1 depending on plant traits and N source. Nitrogen-use efficiency (NUE) decreased with increasing N rate in the two N sources. Based on results of growth, yield, and yield components, and NUE it can be concluded that the N sources were equally effective in upland rice production. Base saturation, pH, and exchangeable calcium (Ca) increased with increasing N rates while iron (Fe), manganese (Mn), and copper (Cu) contents decreased with the increasing N rates.     

Agronomic Evaluation of Phosphorus Sources in Lowland Rice Production

Phosphorus (P) deficiency is one of the most yield-limiting factors in lowland rice production on Brazilian Inceptisol. The objective of this study was to evaluate eight P sources for lowland rice production. The P sources were simple superphosphate (SSP), polymer-coated simple superphosphate (PSSP), ammoniated simple superphosphate (ASSP), polymer-coated ammoniated simple superphosphate (PASSP), triple superphosphate (TSP), polymer-coated triple superphosphate (PTSP), monoammonium phosphate (MAP), and polymer-coated monoammonium phosphate (PMAP). These P sources were applied in four rates (i.e., 50, 100 200, and 400 mg P kg^?1) + one control treatment (0 mg P kg^?1). Plant height, straw yield, grain yield, panicle number, and root dry weight were significantly increased in a quadratic fashion with increasing P levels from 0 to 400 mg kg^?1 of all the P sources evaluated. However, overall maximum root length and P-use efficiency were significantly less at greater P levels. Based on regression equation, maximum plant height was obtained with 262 mg P kg, maximum straw yield was obtained with 263 mg P kg^?1, maximum grain yield was obtained with 273 mg P kg^?1, and maximum panicle density was obtained with 273 mg P kg^?1. Plant growth and yield components had significant positive association with grain yield, except maximum root length. Based on grain yield and average P rate of maximum grain yield, which is 273 mg kg^?1, P sources were classified for P-use efficiency in the order of PSSP = TSP > PTSP > PASSP > SSP > MAP > ASSP. Soil chemical properties [pH; P; potassium (K); calcium (Ca); magnesium (Mg); hydrogen (H) + aluminum (Al); cation exchange capacity (CEC); base saturation; Ca, Mg, and K saturation; acidity saturation; Ca/Mg, Ca/K, and Mg/K ratios] changed significantly with the addition of different P treatments.     

Comparative Efficiency of Phosphorus Sources for Upland Rice Production

Rice (Oryza sativa L.) is a staple food for more than 50% of the world’s population, and phosphorus (P) is one of the most yield-limiting nutrients for rice production in tropical acidic soils worldwide. A greenhouse experiment was conducted to evaluate efficiency of six P sources for upland rice production. The P sources used were simple superphosphate (SSP), polymer-coated SSP (PSSP), triple superphosphate (TSP), polymer-coated TSP (PTSP), monoammonium phosphate (MAP), and polymer-coated MAP (PMAP). There were four P rates [50, 100 200, and 400 mg phosphorus (P) kg^?1] applied with four sources plus one control treatment [0 mg phosphorus (P) kg^?1]. Plant height, straw yield, grain yield, panicle density, root dry weight, maximum root length, and 1000-grain weight were significantly increased with increasing P rates in the range of 0 to 400 mg P kg^?1. However, P-use efficiency (mg grain produced per mg P applied) was decreased with increasing P rate. Based on regression equation, overall maximum plant height was obtained with the application of 235 mg P kg^?1, maximum straw yield with the application of 265 mg P kg^?1, and maximum grain yield at 227 mg P kg^?1. Based on maximum grain yield, the P source were classified as PMAP > SSP = MAP > PSSP > TSP > PTSP in the upland rice production efficiency. Overall, maximum panicle density was obtained with the addition of 231 mg P kg^?1 and maximum 1000-weight was obtained with the addition of 226 mg P kg^?1. Similarly, overall root dry weight and maximum root length were achieved with the application of 261 and 298 mg P kg^?1 of soil. Most of the growth and yield components had a significant positive association with grain yield. Optimum soil acidity indices such as pH; exchangeable calcium (Ca), magnesium (Mg), and potassium (K); Ca, Mg, and K saturation; base saturation; and acidity saturation were established for maximum upland rice grain yield.     

Comparison of Conventional and Polymer Coated Urea as Nitrogen Sources for Lowland Rice Production

Nitrogen (N) is one of the most yield limiting nutrients in lowland rice production. Improving N use efficiency is essential to reduce cost of crop production and environmental pollution. A greenhouse experiment was conducted with the objective to compare conventional and polymer coated urea for lowland rice production. Grain yield, straw yield, panicle density, maximum root length, and root dry weight were significantly increased in a quadratic fashion with the increase of N rate from 0 to 400 mg kg^?1 soil. Nitrogen source X N rate interactions for most of these traits were not significant, indicating that lowland rice responded similarly to change in N rates of two N sources. Based on regression equations, maximum grain yield was obtained with the application of 258 mg N kg^?1 soil and maximum straw yield was obtained with the addition of 309 mg N kg^?1 soil. Nitrogen use efficiency (grain yield per unit of N applied) was maximum for polymer coated urea compared to conventional urea. Root length and root dry weight improved at an adequate N rate, indicating importance of N fertilization in the absorption of water and nutrients and consequently yield. Polymer coated urea had higher soil exchangeable calcium (Ca) and magnesium (Mg), Ca saturation, Mg saturation, base saturation, and effective cation exchange capacity compared to conventional urea. There was a highly significant decrease in soil exchangeable potassium (K) with increasing N rates at harvest of rice plants.     

Phosphorus Nutrition of Upland Rice,Dry Bean,Soybean, and Corn Grown on an Oxisol

Rice, dry bean, corn, and soybean are important food crops. Phosphorus (P) deficiency is one of the most yield-limiting factors for these crops grown on highly weathered Brazilian Oxisols. Four greenhouse experiments were conducted to determine P requirements of these four crops. The P levels used were 0, 50, 100, 200, and 400 mg kg^?1. Growth, yield, and yield components evaluated of four crop species were significantly increased with the application of P fertilization. Most of the responses were quadratic in fashion when the P was applied in the range of 0 to 400 mg kg^?1. Maximum grain yield of upland rice was obtained with the application of 238 mg P kg^?1 of soil, maximum dry bean grain yield was obtained with the application of 227 mg P kg^?1 of soil, and maximum grain yield of soybean was obtained with the application of 224 mg P kg^?1 of soil. Maximum shoot growth of corn was obtained with the addition of 323 mg P kg^?1 of soil. Most of the growth and yield components had significant positive association with grain yield or shoot dry weight. Phosphorus concentration and uptake were greater in the grain compared to straw in upland rice and dry bean plants. Overall, P-use efficiencies decreased with increasing P rates.     

Nitrogen Sources and Rates Effect on Yield,Nutritional Status,and Yield Components of Sunflower

Due to the high levels of crude protein in the achene, sunflower (Helianthus annuus L.) is one of the main oilseeds grown worldwide, particularly for the oil and meal production for animal feed. Despite these advantages, there are few studies on nutrient use efficiency under tropical conditions, especially nitrogen (N). The experiment was conducted in greenhouse conditions to evaluate the effects of N sources and rates on sunflower achene yield (AY), yield and physiological components, and nutritional status of sunflower. The five N sources (calcium nitrate (Ca(NO₃)₂), potassium nitrate (KNO₃), ammonium nitrate (NO₃NH₄), ammonium sulfate ((NH₄)₂SO₄), and urea (CO(NH₂)₂)), and four N rates (0, 50, 100, and 200 mg kg^?1) were studied. AY was reduced with the ammonia sources application from the 100 mg N kg^?1. Plant height and capitulum dry weight (CDW), capitulum diameter, shoot dry weight (SDW), and chlorophyll content were significantly related with N sources and rates. Except for potassium (K), the N rates changed the N, P, Ca, Mg, and S concentration in the leaves and N concentration in achene. In the comparison of sources, on the average of N rates, urea application was more effective than the other N fertilizers in the AY.     

EFFECT OF NEEM-OIL COATED PRILLED UREA WITH VARYING THICKNESS OF NEEM-OIL COATING AND NITROGEN RATES ON PRODUCTIVITY AND NITROGEN-USE EFFICIENCY OF LOWLAND IRRIGATED RICE UNDER INDO-GANGETIC PLAINS

The nitrogen (N) fertilizer-use efficiency (20–50%) is low in rice fields in India. The neem-oil coated urea can increase N-use efficiency in lowland rice, but the desirable thickness of neem-oil coating onto urea is not known yet. Therefore, field experiments were conducted during kharif (rainy) season years 2004 and 2005 at the Research Farm of Indian Agricultural Research Institute, New Delhi to know the suitable thickness of neem-oil coating on prilled urea (PU) for increased N-use efficiency and yield. The treatments comprised of twelve combinations of four N sources (PU coated with neem-oil thickness of 0, 500, 1000 and 2000 mg kg^?1 PU) and three N levels (50, 100, and 150 kg N ha^?1) plus a no-N control. Prilled urea (PU) refers to the common urea available commercially in prills, which is different from urea super granules. Application of urea coated with neem-oil thickness of 1000 mg kg^?1 PU resulted in significantly higher growth, yield parameters, grain yield, N uptake, and efficiency of aromatic rice (Oryza sativa L.) over uncoated PU. Nitrogen application at 122 kg ha^?1 was optimum for increased yield of rice. Nitrogen-use efficiency decreased significantly and substantially with each successive increase in levels of N from 50 to 150 kg ha^?1.     

Potassium Requirements of Lowland Rice

Rice is a staple food for about 50 percent of the world’s population. Potassium (K) is absorbed in large amounts by rice plants and adequate amounts of this element are fundamental to improve productivity and maintain sustainability of the cropping systems. A greenhouse experiment was conducted to determine the adequate rate of K for lowland rice grown on a Brazilian Inceptisol. The K rates used were 0, 50, 100, 200, 400, and 600 mg K kg^?1 soil. Most of the growth, yield, and yield components were significantly and quadratically increased with increasing K levels. Based on a quadratic equation, maximum grain yield was obtained with the addition of 371 mg K kg^?1 soil. Maximum plant height and shoot dry weight were obtained at 414 and 398 mg K kg^?1 soil, respectively. Root growth (maximum length and dry weight) was also significantly increased in a quadratic fashion with the increasing K rate in the growth medium. Maximum root length was achieved at 58 mg K kg^?1 whereas maximum root dry weight was obtained with the addition of 394 mg K kg^?1 soil. Plant height, shoot dry weight, 1000-grain weight, root length, and root dry weight were significantly associated with grain yield. Hence, manipulation of these growth and yield components with the addition of K fertilizer can improve yield of lowland rice in varzea soils of central part of Brazil. Potassium uptake increased significantly in a quadratic fashion with increasing K rate. However, K-use efficiency (mg grain per mg K applied) decreased significantly with increasing K rate in a quadratic fashion. Maximum grain yield was obtained with 117 mg kg^?1 Mehlich 1–extractable K, base saturation of 53 percent, Mg saturation of 9 percent, K saturation of 2 percent, and Ca/Mg ratio of 4.     

EFFECT OF NITROGEN SOURCES AND RATES ON YIELD AND QUALITY OF SILAGE CORN

The objective of this study was to determine the effect of nitrogen (N) application source and rate on silage corn (Zea mays L.). Urea, ammonium nitrate, and ammonium sulfate were compared at 50, 100, 150, and 200 kg N ha^?1. The application of ammonium sulfate produced the highest plant height, leaf area index (LAI), total yield, and stem, leaf, and ear dry matter, followed by ammonium nitrate and urea. However, nitrogen sources had no marked effects on the content of protein, ash, oil, soluble carbohydrates, acid detergent fiber (ADF) and neutral detergent fiber (NDF). As the rate of nitrogen increased plant height, LAI, total yield, and stem, leaf, tassel, and ear dry matters, and protein, ash and oil contents increased while soluble carbohydrates, ADF, and NDF contents decreased. Ammonium sulfate was the most effective N source on production and 200 kg N ha^?1 was the most effective N rate on corn yield and quality.     

Nitrogen,Phosphorus and Potassium Interactions in Upland Rice

Upland rice is an important crop in South America, including Brazil. Nutrient interactions are important in determining crop yields. A greenhouse experiment was conducted to evaluate interaction among nitrogen (N), phosphorus (P), and potassium (K) in upland rice production. The treatments applied to upland rice grown on an Oxisol were three levels of N (N₀, N₁₅₀ and N₃₀₀ mg kg^?1), three levels of P (P₀, P₁₀₀ and P₂₀₀ mg kg^?1) and three levels of K (K₀, K₁₀₀ and K₂₀₀ mg kg^?1). These treatments were tested in a 3 × 3 × 3 factorial arrangement. Grain yield, shoot dry weight, plant height, root dry weight, maximum root length, panicle number, 1000-grain weight, and grain harvest index were significantly influenced by N, P, and K treatments. The treatment that did not receive P fertilization did not produce panicle or grain. Hence, P was most yield-limiting nutrient compared to two other nutrients. At the N₀P₀K₀ treatment, rice did not produce grains, indicating severe deficiency of these nutrients in Brazilian Oxisols. Maximum grain yield was obtained with the N₃₀₀P₂₀₀K₂₀₀ treatment. Grain yield had significant positive association with plant height, shoot dry weight, root dry weight, maximum root length, 1000-grain weight, panicle number, and grain harvest index. Among these growth and yield components, shoot dry weight had the highest positive association with grain yield and root length minimum positive association with grain yield. Hence, adopting adequate soil and crop management practices can improve growth and yield components and increase grain yield of upland rice.     

Zinc,Copper, Boron and Iron Requirement of Upland Rice Grown on a Brazilian Oxisol

Deficiency of micronutrients increasing in field crops, including upland rice in recent years. The objective of this study was to determine requirement of zinc (Zn), copper (Cu) boron (B) and iron (Fe) for upland rice grown on a Brazilian Oxisol. The levels used were: Zn (0, 10, 20, 40, and 80 mg kg^?1), Cu (0, 5, 10, 20 and 40 mg kg^?1), B (0, 5, 10, 20 and 40 mg kg^?1) and Fe (0, 250, 500, 1000, and 2000 mg kg^?1). Plant height, straw yield, grain yield, panicle number and grain harvest index (GHI) were significantly improved with the addition of these micronutrients. Root growth was also improved with the application of micronutrients, except with the addition of B. Maximum grain yield was obtained with the addition of 51 mg Zn, 24 mg Cu, 5 mg B kg^?1, and 283 mg Fe kg^?1 soil. Similarly, maximum straw yield was obtained with the addition of 38 mg Zn, 17 mg Cu, 6 mg B kg^?1, and 1500 mg Fe kg^?1 soil. Maximum plant height was obtained with the addition of 54 mg Zn, 10 mg B kg^?1, and 1197 mg Fe kg^?1 soil. Copper did not affect plant height significantly. Maximum panicle number was obtained with the addition of 22 mg Cu kg^?1, 3 mg B kg^?1, and 1100 mg Fe kg^?1 soil. Zinc did not affect panicle number significantly. Maximum GHI was obtained with the addition of 61 mg Zn kg^?1, and 8 mg B kg^?1. Zinc was had a linear increase in GHI in the range of 0 to 80 mg kg^?1, and Fe showed a negative relationship with GHI.     

Contribution of Biofertilizers and Fertilizer Nitrogen to Nutrient Uptake and Yield of Egyptian Winter Wheat

ABSTRACT

Nutrient uptake and grain and straw yield of Egyptian winter wheat (Triticum aestivum L. Merr.) were evaluated for two site-years after the seed inoculation with two biofertilizer products, Phosphorien, containing the phosphorus (P)-solubilizing bacteria Bacillus megatherium, and Nitrobien, containing a combination of nitrogen (N)-fixing bacteria Azotobacter chroococcum and Azospirillum liposerum. Ammonium nitrate and polymer-coated urea fertilizers were applied to plots alone and together with the biofertilizers at rates of either 83 kg N ha^?1 or 186 kg N ha^?1 for comparison. The highest grain yield (5.76–6.74 Mg ha^?1) and straw yield (11.49–13.32 Mg ha^?1) occurred at the highest fertilizer rates with N fertilizer. There was a slight additional increase in grain and straw yields when a biofertilizer was applied along with N fertilizer. A slightly higher grain and straw yield was measured with the polymer-coated urea treatment than with the ammonium nitrate treatment. The biofertilizer materials were not as effective as N fertilizers in producing grain (4.02–4.09 Mg ha^?1) or straw (7.71–8.11 Mg ha^?1) for either year, although the Nitrobien + Phosphorien combination increased these parameters over the N-fertilizer control. The effect of the Nitrobien biofertilizer in increasing grain yields was equivalent to a urea application rate of about 13 kg N ha^?1. Biofertilizer inoculations increased iron (Fe), manganese (Mn), zinc (Zn), and copper (Cu) concentrations in wheat tissue (at boot stage), but these higher levels did not influence grain or straw yield.     

Does the potential ammonium fixation of soils have an impact on the optimum nitrogen fertilizer rate?

Field experiments were conducted to determine the effect of nitrogen (N) fertilizer forms and doses on wheat (Triticum aestivum L.) on three soils differing in their ammonium (NH₄) fixation capacity [high = 161 mg fixed NH₄-N kg^?1 soil, medium = 31.5 mg fixed NH₄-N kg^?1 soil and no = nearly no fixed NH₄-N kg^?1 soil]. On high NH₄⁺ fixing soil, 80 kg N ha^?1 Urea+ ammonium nitrate [NH₄NO₃] or 240 kg N ha^?1 ammonium sulfate [(NH₄)₂SO₄]+(NH₄)₂SO₄, was required to obtain the maximum yield. Urea + NH₄NO₃ generally showed the highest significance in respect to the agronomic efficiency of N fertilizers. In the non NH₄⁺ fixing soil, 80 kg N ha^?1 urea+NH₄NO₃ was enough to obtain high grain yield. The agronomic efficiency of N fertilizers was generally higher in the non NH₄⁺ fixing soil than in the others. Grain protein was highly affected by NH₄⁺ fixation capacities and N doses. Harvest index was affected by the NH₄⁺ fixation capacity at the 1% significance level.     

QUANTITY AND QUALITY OF CITRUS ON A CITROMELO ROOTSTOCK AS AFFECTED BY DIFFERENT TYPES OF N FERTILIZATION (CHEMICAL AND ORGANIC)

With respect to the important effects of nitrogen (N) on plant growth and fruit production, a five-year experiment was performed to evaluate the effects of different sources of N fertilization including chemical and organic on the quantity and quality of citrus fruit. Using five-year old trees, different types of fertilization including ammonium sulfate, urea coated with sulfur, ammonium nitrate and manure were tested using seven treatments in five replicates from 2002 to 2007. Different plant quantitative and qualitative parameters were determined. The most effective strategy on fruit yield production was the use of urea coated with sulfur and manure with 92.46 kg ha^?1 fruit yield followed by ammonium sulfate and manure (87.06 kg ha^?1) and ammonium sulfate (86.43 kg ha^?1). The combination of mineral and organic fertilization may be the most suitable fertilization strategy for citrus production.     

NITROGEN USE EFFICIENCY IN UPLAND RICE GENOTYPES

Nitrogen (N) deficiency is one of the most yield-limiting nutrients in upland rice growing regions word wide. A greenhouse experiment was conducted with the objective to evaluate nineteen upland rice (Oryza sativa. L.) genotypes for N use efficiency. The soil used in the experiment was an Oxisol and two N levels used were without N application (low level) and an application of 400 mg N kg^?1 of soil (high level). Grain yield and yield components and N uptake parameters were significantly affected by N and genotype treatments. Regression analysis showed that plant height, shoot dry weight, number of panicles per pot, number of grains per panicle, grain harvest index, N uptake in shoot and grain were having significant positive relation with grain yield. Nitrogen concentration of 6.4 g kg^?1 in the shoot is established as deficient level and 9.5 g kg^?1 as sufficient level at harvest. Agronomic efficiency of N (grain yield/unit of N applied) and N utilization efficiency (physiological efficiency X apparent recovery efficiency) were significantly different among genotypes. These two N use efficiencies were having significant quadratic relationship with grain yield. Soil pH, exchangeable soil Ca and base saturation were having significantly positive association with grain yield. However, soil extractable phosphorus (P), potassium (K), hydrogen (H⁺), aluminum (Al) and cation exchange capacity were having significantly negative association with grain yield.     

Nitrogen Uptake and Use Efficiency in Upland Rice under Two Nitrogen Sources

Upland rice is an important crop in South America, including Brazil. Nitrogen (N) is one of the most yield-limiting nutrients in upland rice production in Brazil. A greenhouse experiment was conducted to evaluate N uptake and use efficiency as influenced by N sources. The soil used in the experiment was an Oxisol. The N sources were ammonium sulfate and urea, and N rates were 0, 50, 100, 150, 300, and 400 mg kg^?1 of soil. Nitrogen concentrations in the root, shoot, and grain were significantly influenced by N sources. The N rate and N source significantly influenced the N uptake in root, shoot, and grain. Similarly, nitrogen rate by N source interaction was also significant for N uptake in the root, shoot, and grain, indicating N source has a significant influence on uptake of N. Overall, concentration (content per unit dry weight) of N was greater in the grain, followed by root and shoot. Agronomical efficiency, apparent recovery efficiency, and utilization efficiency of N were significantly influenced by N rate and varied with N sources. However, physiological and agrophysiological efficiencies were only influenced significantly by N sources. Overall, N recovery efficiency was 33% for ammonium sulfate and 37% for urea. Hence, the large amount of N lost from soil–plant system may be by denitrification or voltilization.     

Tissue Nitrogen as a Base for Recommendations of Additional Nitrogen to Spring Wheat in Southern Finland

Abstract

Nitrogen (N) deficiency has become more common in the traditional wheat cultivation areas of southern Finland as yield potentials have increased. Based on data for the period studied (1968-88) a grain protein concentration below 11.2% in spring wheat (Triticun aestivum L.) is an indicator of N deficiency. The mean of maximum grain yield obtained was 4655 kg ha^?1 when grain protein concentration exceeded 11.2%. The estimation of plant tissue N content could be an effective diagnostic tool for identifying N status in the early growth stages of spring wheat. To address the feasibility of this test, the present study was conducted in 1990-91 to determine the critical plant tissue N concentrations of three plant parts at the early double-ridge stage (Stage 2), at the stage when stigmatic branches of the carpel begin to form (Stage 7) and at pollination (Stage 10). Nitrogen was applied at rates of 0 and 110 kg N ha^?1 as granular ammonium nitrate and granular slow-release-nitrogen fertilizers to establish a wide range of plant tissue N levels, grain yields and grain protein concentrations. Critical plant N levels were calculated for the different plant parts using the Cate-Nelson procedure. From this study it can be concluded that the critical N level recommended for Stage 2 is 43 g of N kg^?1 dry matter of the whole plant. Critical N levels recommended for Stage 7 are 28 g of N kg^?1 dry matter of the whole plant, 30 g of N kg^?1 of the leaves and 13 mg total N in dry matter. Critical N levels recommended for Stage 10 are 12 g of N kg^?1 of the whole plant, 23 g of N kg^?1 of the leaves and 15 mg total N in dry matter.     

Nutrient Uptake in Dry Bean Genotypes

Dry bean is an important legume for human consumption in South America. A greenhouse experiment was conducted to evaluate uptake and use efficiency of macro- and micronutrients by six dry bean genotypes at two P levels (25 and 200 mg kg^?1 soil). Shoot dry weight and grain yield varied significantly among genotypes and significantly increased with increasing phosphorus (P) levels. Grain harvest index (GHI) and 100-grain weight also differ significantly among genotypes and significantly increased with the increasing P levels. Based on grain yield efficiency index (GYEI), genotypes were classified as efficient and inefficient. The most efficient genotype was CNFP 10104, and inefficient genotypes were CNFP 10103 and CNFP 10120. Number of pods per plant and number of seeds per pod increased significantly with the addition of 200 mg P kg^?1 of soil compared to the low level of P (25 mg P kg^?1). Similarly, nitrogen (N), P, calcium (Ca), magnesium (Mg), sulfur (S), zinc (Zn), copper (Cu), and manganese (Mn) concentrations and uptake in the shoot and grain also significantly varied among genotypes. Uptake of macro- and micronutrients was greater under the greater P rate compared to the low P rate. This may be related to greater shoot or grain yield at 200 mg P kg^?1 soil compared to 25 mg P kg^?1 of soil.     

Supplements of Nickel Affect Yield,Quality, and Nitrogen Metabolism When Urea or Nitrate is the Sole Nitrogen Source for Cucumber

ABSTRACT

Influences of nickel (Ni) concentrations in the nutrient solution on yield, quality, and nitrogen (N) metabolism of cucumber plants (Cucumis sativus cv ‘RS189’ and ‘Vikima’) were evaluated when plants were grown either with urea or nitrate as the sole N source. The cucumber plants were treated with two N sources, urea and nitrate as sodium nitrate (NaNO₃) at 200 mg L^?1, and three concentrations of Ni as nickel sulfate (NiSO₄·6H₂O; 0, 0.5, and 1 mg L^?1). Treatments were arranged in a randomized block design with six replicates. The highest concentration of Ni in the leaves (1.2 mg kg^?1 Dwt) was observed in the urea-fed plants at 1 mg L^?1 Ni concentration. Additions of Ni up to 0.5 mg L^?1 had no effect on the fruit Ni concentration in the both urea and nitrate-fed plants. Yield significantly (p < 0.05) increased with the Ni supplements from 0 to 0.5 mg L^?1 (10 and 15% in ‘RS189’ and ‘Vikima’, respectively), but decreased when 1 mg L^?1 Ni applied to the solutions in urea-fed plants. Nitrate-fed plants had a higher percentage of total soluble solids compare to those urea-fed plants. Nitrate concentrations of the fruits in urea-fed plants in both cultivars were reduced by approximately 50% compared to those nitrate-fed plants. The reduction of nitrate concentration in the fruits became more pronounced as the Ni concentration increased in the solution. The rate of photosynthesis (Pn) increased with the increase of the Ni concentration in the solution with urea-fed plants. Both N concentration and nitrate reductase (NR) activity of young leaves were higher in urea-fed plants at 0.5 mg l^?1 Ni concentration. Ni supplements enhanced the growth and yield of urea-fed plants by increasing Pn, N concentration and NR activity. It can be concluded that Ni supplements (0.5 mg l^?1) improve yield, quality, and NR activity in urea-fed cucumber plants.