Mangrove structure,litter and macroalgal productivity in a northern‐most forest of Florida

Rhizophora mangle L. dominated 10 overwash islands within Tampa Bay forming the northernmost mangrove forests on the west coast of Florida. The mean number of trees and basal area were 5040 trees ha^-1 and 20.5m²ha^-1, respectively. Basal areas ranged from 1.1 (Avicennia germinans (L.) Stern), to 2.6m²ha^-1 (Laguncularia racemosa Gaertner), to 16.8 (R. mangle). Cockroach Bay mangroves are small (5.8–7.0m tall) versus coastal forests of south Florida and the Caribbean. Total litter production for a 12 month period was maximal in September for fringing (7.4gdwtm^-2d^-1) and interior (8.7gdwtm^-2d^-1) areas with the two zones not being significantly different. Average litter fall (3.1gdwtm^-2d^-1) was similar to more tropical Caribbean mangals. Leaves accounted for 68 of the litter and reproductive material for 6, being similar to tropical riverine and overwash marine angiosperm communities on the Mexican coast. Although mangrove forests in Tampa Bay are small in stature and experience cold damage and occasional frosts, their litter fall is similar in biomass to that of more tropical mangals. However, their reproductive output is low based on litter fall versus more tropical mangals suggesting that the northern extension is less than optimum. Macroalgal diversity was low (10 species) as compared to Caribbean mangals. Macroalgal turf (0.8gCm^-2d^-1) and epiphyte communities of A.germinans pneumatophores (2.7gCm^-2d^-1) have productivity levels that are equal to or greater than those of Caribbean mangals.     

The composition and abundance of microarthropod communities on arboreal litter in the canopy of Cryptomeria japonica trees

In a Cryptomeria japonica plantation, we examined the composition and seasonal abundance of microarthropods in communities associated with habitat substrates in the canopy (defined as dead leaves, dead branches, and living leaves) and compared them with those in soil communities. Habitat substrates and microarthropods were periodically collected by the branch-clipping and washing method from the canopy and by the Tullgren method from the soil. Oribatida, Collembola, and larvae of the Chironomidae, most of which are detritivorous or fungivorous, were dominant in the canopy. The dominant oribatid and collembolan families differed markedly between the canopy and the soil. Numbers of all microarthropods per unit dry weight of leaf or per unit area of branch ranged from 4.2 to 11.7g^–1 dry wt on dead leaves, 0.13–0.48cm^–2 on dead branches, and 1.3–6.4g^–1 dry wt on living leaves. In the soil, the number of individuals per unit ground area ranged from 24000 to 220000m^–2. The total abundances of microarthropods on dead leaves and dead branches were almost constant throughout the year. These results suggest that the arboreal litter characteristic of C. japonica canopies is utilized consistently by large numbers of detritivorous and fungivorous microarthropods, and that the decomposition of dead foliage and branches is initiated in the canopy.     

Manufacture and properties of low-density binderless particleboard from kenaf core

Low-density binderless particleboards from kenaf core were successfully developed using steam injection pressing. The target board density ranged from 0.10 to 0.30g/cm³, the steam pressure used was 1.0MPa, and the steam treatment times were 7 and 10min. The mechanical properties, dimensional stability, and thermal and sound insulation performances of the boards were investigated. The results showed that the low-density kenaf binderless particleboards had good mechanical properties and dimensional stability relative to their low board densities. The board of 0.20g/cm³ density with a 10-min treatment time produced the following values: modulus of rupture 1.1MPa, modulus of elasticity 0.3GPa, internal bond strength 0.10MPa, thickness swelling in 24h water immersion 6.6%, and water absorption 355%. The thermal conductivity of the low-density kenaf binderless particleboards showed values similar to those of insulation material (i.e., rock wool), and the sound absorption coefficient was high. In addition, the boards are free from formaldehyde emission. Kenaf core appears to be a potential raw material for low-density binderless panels suitable for sound absorption and thermally resistant interior products.Part of this report was presented at the 52th Annual Meeting of the Japan Wood Research Society, Gifu, Japan, April 2002     

Effects of a nursery CO2 enriched atmosphere on the germination and seedling morphology of two Mediterranean oaks with contrasting leaf habit

The use of an enriched CO₂ atmosphere in tree nurseries has been envisaged as a promising technique to increase productivity and to obtain seedlings with a higher root/shoot ratio, an essential trait to respond to water stress in Mediterranean-type ecosystems. In that framework, we have analyzed the effects of three levels of atmospheric CO₂ concentration (350, 500 and 700ppm) on the germination rate, growth and morphology of seedlings of two Mediterranean oaks used in reforestation programs: the evergreen Quercus ilex L. and the deciduous Quercus cerrioides Wilk. et Costa. CO₂ enrichment increased the germination rate of Q. cerrioides (from 70±7 to 81±3%) while it decreased that of Q. ilex (from 71±10 to 41±12%). Seedlings of both species increased approximately 60% their total biomass in response to CO₂ enrichment but at two different CO₂ concentrations: 500ppm for Q. cerrioides and 700ppm for Q. ilex. This increase in seedlings biomass was entirely due to an augmentation of root biomass. Considering germination and biomass partitioning, an enriched CO₂ atmosphere might not be appropriate for growing Mediterranean evergreen oaks, such as Q. ilex, since it reduces acorn germination and the only gains in root biomass occur at a high concentration (700ppm). On the other hand, a moderate CO₂ enrichment (500ppm) appears as a promising nursery technique to stimulate the germination, growth and root/shoot ratio of deciduous oaks, such as Q. cerrioides.     

Minimum distance boundary method: maximum size-density lines for unthinned <Emphasis Type="Italic">Acacia mangium</Emphasis> plantations in South Sumatra,Indonesia

A minimum-distance boundary method that will minimize the sum of distances between measured points and a fitted self-thinning lines on log–log coordinates of stand density and quadratic mean diameter was proposed in order to estimate the maximum size density line: an upper boundary of self-thinning line. The lines for A. mangium were inferred with this method using data in two areas of unthinned plantations in South Sumatra, Indonesia. Slopes of the lines were deduced as –1.63 and –1.67 within the range of 10–21cm of quadratic mean dbh. The intensity of self-thinning was examined as a rate of reduction of density in relation to dbh increment. The rates were found to be higher than the slopes in the range close to the maximum line; hence the lines inferred in this study were likely existent. Maximum basal area deduced from the size-density line was 28–30m²/ha at 12cm of dbh and then it increased up to 34–37m²/ha at 20cm of dbh.     

In vitro propagation of <Emphasis Type="Italic">Oroxylum indicum</Emphasis> Vent. a medicinally important forest tree

In vitro propagation of Oroxylum indicum Vent. was carried out using cotyledonary node explants. Among the different types of cytokinins used for culture establishment, 6-benzyladenine exhibited the best response with higher concentrations (8.87µM or above) for inducing multiple shoots. Inclusion of indole-3-acetic acid (2.85µM) into 6-benzyladenine-supplemented medium triggered a high frequency of response as well as a proliferation of shoots. The best medium for proliferation was Murashige-Skoog (MS) medium with 6-benzyladenine (8.87µM) and indole-3-acetic acid (2.85µM). However, incorporation of gibberellic acid (1.44µM) was mandatory to enhance shoot elongation. Repeated subculturing of cotyledonary node and in vitro developed nodal segments in MS medium with 6-benzyladenine (4.44µM) at 4-week intervals resulted in continuous mass multiplication of shoots without any evidence of decline. Root induction was best (91.6%) when MS strength was reduced to one-quarter and combined with -naphthalene acetic acid (2.69µM) and indole-3-acetic acid (5.71µM), with a high survival rate (70–72%) of plantlets hardened in either soil rite or soil:sand:soil rite (1:1:2).     

Compressive deformation of wood impregnated with low molecular weight phenol formaldehyde (PF) resin I: effects of pressing pressure and pressure holding

The deformation behavior of low molecular weight phenol formaldehyde (PF) resin-impregnated wood under compression in the radial direction was investigated for obtaining high-strength wood at low pressing pressures. Flat-sawn grain Japanese cedar (Cryptomeria japonica) blocks with a density of 0.34g/cm³ were treated with aqueous solution of 20% low molecular weight PF resin resulting in weight gain of 60.8%. Oven-dried specimens were compressed using hot plates fixed to a testing machine. The temperature was 150°C and the pressing speed was 5mm/min. The impregnation of PF resin caused significant softening of the cell walls resulting in collapse at low pressures. The cell wall collapse was strain-dependent and occurred at a strain of 0.05–0.06mm/mm regardless of whether the wood was treated with PF resin. Thus, pressure holding causing creep deformation of the cell walls was also effective in initiating cell wall collapse at low pressure. Utilizing a combination of low molecular weight PF resin impregnation and pressure holding at 2MPa resulted in a density increase of PF resin-treated wood from 0.45 to 1.1g/cm³. At the same time, the Youngs modulus and bending strength increased from 10GPa to 22GPa and 80MPa to 250MPa, respectively. It can be concluded that effective utilization of the collapse region of the cell wall is a desirable method for obtaining high-strength PF resin-impregnated wood at low pressing pressures.     

Sapling architecture and growth in the co-occurring species Castanopsis cuspidata and Quercus glauca in a secondary forest in western Japan

This study quantitatively compared the sapling (height 62–289cm) architecture and growth of Castanopsis cuspidata and Quercus glauca, both of which are major components in the temperate zone of western Japan, under shaded light conditions in secondary forest. When the sapling architectures were compared at the same support mass (trunk + branch mass), C. cuspidata had a larger crown area but a smaller height gain than did Q. glauca owing to the allocation of more biomass to lateral branches in C. cuspidata. The above-ground relative growth rate (RGR) of C. cuspidata (0.442gg^–1 year^–1) was nearly twice that of Q. glauca (0.256gg^–1year^–1), primarily as a result of a greater total leaf area per above-ground biomass (LAR) in C. cuspidata (56cm²g^–1) as compared to Q. glauca (33cm²g^–1). Because it has a disadvantage in height gain, related to its allocation pattern of biomass, C. cuspidata realized the same height growth (RGR_H) as Q. glauca, despite the large biomass production. The great potential for photosynthesis in C. cuspidata, which results from its vigorous lateral spreading, is presumed to give it a long-term advantage over Q. glauca in the shaded forest understory. Q. glauca invests preferentially in trunk biomass, possibly giving it an advantage in sunny sites as opposed to a shaded forest understory.     

Canopy cover effects on nitrogen and phosphorus status in understory vegetation in oak and pine stands

The rate of change of leaf mass, N and P levels in understory vegetation at various levels of canopy cover were measured for 2 years following canopy cover manipulations in northern red oak (Quercus rubra L.) and red pine (Pinus resinosa Ait.) stands in northern Lower Michigan, USA. Canopy cover treatments consisted of clearcut, 25% (50% during first sampling year), 75%, and uncut. Leaf mass, and N and P contents were significantly higher in the clearcut treatment than in other canopy cover treatments, except for the 25% treatment in red pine stands. Leaf N concentrations in understory vegetation were also significantly higher in the clearcut (1991, 20.8mgg^–1; 1992, 22.4mgg^–1) than in the uncut treatment (1991, 16.5mgg^–1; 1992, 16.9mgg^–1). Canopy type (northern red oak and red pine) had little influence on understory nutrient status and leaf mass. In addition, fronds of bracken ferns in all canopy cover treatments in both northern red oak and pine stands were a major sink of nutrients in the understory. The results of this study showed that partial canopy removal generally had only a minor impact on understory leaf production and nutrient status compared with clearcuts during the 2-year period following canopy removal.     

Gamma radiation sensitivity of larvae and adults of the red flour beetle, <Emphasis Type="Italic">Tribolium castaneum</Emphasis> Herbst

In this study, the susceptibility of larvae and adults of Tribolium castaneum (Herbst) to gamma radiation was investigated in the laboratory in Turkey. Gamma radiation was applied at 6 dose levels between 20 and 200Gy to 13–15day-old adults and at 5 dose levels between 20 and 180Gy to 18–20day-old larvae of T. castaneum. All experiments were performed in growth chambers maintained at 27±1°C and 70±5% r.h. The larvae proved to be the more susceptible stage, survival to the adult stage being prevented by exposure of the eggs to 100Gy; the adult stage was less susceptible. LD₅₀ and LD₉₉ values were determined as 19,75 and 42,97Gy for larvae and 33,21 and 64,50Gy for adult stage, respectively. It was concluded that 100Gy is the effective dose for both larval and adult stages.     

Preservative treatment of wood-based composites with 3-iodo-2-propynyl butylcarbamate using supercritical carbon dioxide impregnation

Five structural-use wood-based composites [medium density fiberboard (MDF), hardwood plywood, softwood plywood, particleboard, oriented strand board (OSB)] were treated with 3-iodo-2-propynyl butylcarbamate (IPBC) using supercritical carbon dioxide (SC-CO₂) as a carrier solvent. Treatment was conducted at 35°C/7.85MPa (80kgf/cm²), 35°C/9.81MPa (100kgf/cm²), 35°C/11.77MPa (120kgf/cm²), 45°C/7.85MPa, 45°C/9.81MPa, 45°C/11.77MPa, 55°C/7.85MPa, 55°C/9.81MPa, and 55°C/11.77MPa. A decay test was carried out in the laboratory according to the modified Japanese standard method in which untreated and treated specimens were exposed for 12 weeks to a monoculture of the white-rot fungus Trametes versicolor (L.: Fr.) Pilat or the brown-rot fungus Fomitopsis palustris (Berk. et Curt.) Gilbn. and Ryv. IPBC/SC-CO₂ treatment protected the treated materials from decay by the two fungi, although the relative efficiency against decay varied with the treatment conditions and the type of wood-based composite. Better performance for MDF, hardwood plywood, and particleboard was generally obtained at high temperatures and pressures, whereas softwood plywood and OSB were most protected at low temperatures under any of the pressure levels tested.Part of this work was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002     

Effects of nitrogen and phosphorus fertilization on the growth and nutrition of hybrid poplars on Vancouver Island

The effects of nitrogen (N) and phosphorus (P) rates, P source, and method of P application were tested on growth and nutrition of four clones of hybrid poplar (Populus trichocarpa Torr. & Gray×P. deltoides Bartr. ex Marsh or P. trichocarpa×P. maximowiczii A. Henry) in a plantation on Vancouver Island. Treatments were applied shortly after planting. Nitrogen (0, 500kgNha^–1) was supplied as ammonium sulfate (AS); half of the AS was added at the start of the second growing season. Phosphorus (0, 100, 200kgPha^–1) was supplied as triple super phosphate (TSP), rock phosphate (RP), or diammonium phosphate (DAP) and banded or broadcast. Over four growing seasons, stem volumes increased with AS and P additions. The effects of AS and P each were greatest when the other was also added. Volume was greater when P was applied at 100kgha^–1 than in the P control and did not significantly increase further at 200kgPha^–1. Phosphorus additions were more effective when added as TSP or DAP than when added as RP, but only in P100 and when banded. Banding increased volume when P was applied at 200kgha^–1, but increases were significant only for DAP fertilized trees. Roto-tilling associated with the banding treatment also increased volume when AS and P were not added. Rankings of clones with respect to stem volume varied with N supply and changed over time.     

Soil respiration and soil CO<Subscript>2</Subscript> concentration in a tropical forest,Thailand

Soil respiration and soil carbon dioxide (CO₂) concentration were investigated in a tropical monsoon forest in northern Thailand, from 1998 to 2000. Soil respiration was relatively high during the rainy season and low during the dry season, although interannual fluctuations were large. Soil moisture was widely different between the dry and wet seasons, while soil temperature changed little throughout the year. As a result, the rate of soil respiration is determined predominantly by soil moisture, not by soil temperature. The roughly estimated annual soil respiration rate was 2560gCm^–2year^–1. The soil CO₂ concentration also increased in the rainy season and decreased in the dry season, and showed clearer seasonality than soil respiration did.     

Biological performance of wood-based composites treated with a formulation of 3-iodo-2-propynyl butylcarbamate and silafluofen using supercritical carbon dioxide

Wood-based composites (medium density fiberboard, hardwood plywood, softwood plywood, particleboard, and oriented strand board) treated with a mixture formulation of 3-iodo-2-propynyl butylcarbamate (IPBC) and silafluofen using supercritical carbon dioxide as a carrier solvent were evaluated for their resistance to biological attack in a laboratory study. The formulation was pre-pared by mixing 10g of IPBC and 1g of silafluofen in ethanol solution (20ml). Treatments were conducted at 35°C/7.85MPa, 35°C/9.81MPa, and 55°C/11.77MPa with the direct introduction of 20ml of the formulation into the treatment vessel with a capacity of ca. 2000ml at a rate of 2ml/min. Laboratory tests indicated that the treatment conditions used significantly enhanced the resistance of the treated wood-based composites against fungal and termite attacks. Because no significant difference in efficacy against both biodegrading agents was noticed regardless of the treatment conditions, the treatment at 35°C/7.85MPa was thought to be the most economical in terms of energy consumption and performance of treated materials. However, the amount of biocides in a formulation must be carefully selected in accordance with the required treatment condition to ensure satisfactory performance of the treated wood-based composites against any biological agent.     

Root morphology and nutritional status of Japanese red cedar saplings subjected to in situ levels of aluminum in forest soil solution

There is little information on the effects of in situ levels of aluminum (Al) in the forest soil solution on the root morphology of Japanese red cedar (Cryptomeria japonica D. Don). We evaluated whether morphological and nutritional changes in the white roots of Japanese red cedar saplings grown in glass-bead culture for 18 weeks occurred in response to Al solutions at five concentrations: 0 (control), 0.05, 0.1, 0.5, and 1.0mM. Branching white roots treated with 0.5 or 1.0mM Al had some stunted, brown, thickened tips. Their mean lengths were significantly shorter than those of roots treated with 0.05 or 0.1mM Al. The maximum diameters of white roots treated with 0.5 or 1.0mM Al were significantly larger than those of the control. Treatment with 0.5 or 1.0mM Al reduced the concentrations of Ca and Mg in the white roots and increased the concentration of Al compared with the control. These results indicate that between 0.1 and 0.5mM Al, a drastic change occurs in the effects of Al on the morphology and nutritional status of white roots of Japanese red cedar saplings, and suggest that the Al levels in Japanese forest soils may induce morphological changes in the white roots.     

The applicability of a color acetate film for estimating photosynthetic photon flux density in a forest understory

The suitability of a color acetate film for estimating photosynthetic photon flux density (PPFD) in a forest understory was examined. The fading ratio of the film (F), the total PPFD (PPFD_total) to which the film was exposed, and the average daily maximum temperature during exposure (T) were obtained from measurements at multiple sampling points throughout an entire year within a natural secondary forest (n = 42). The ranges of the recorded values were as follows: F 35%–99%, PPFD_total 1.4–28.3molm^–2, and T 6°–32°C. PPFD_total was regressed by F and T with a high r ² (=0.94; P < 0.0001): PPFD_total = (100 – F)/(1.085 + 0.051T). The absolute error (|estimated PPFD_total – measured PPFD_total|) averaged 1.3molm^–2 with a maximum of 5.7molm^–2, indicating a good fit. These results indicated broad applicability of the film, both spatially and temporally, for estimating forest understory PPFD.     

Development of binderless particleboard from kenaf core using steam-injection pressing

Binderless particleboards were successfully developed from kenaf core using the steam-injection press. The effects of board density, steam pressure, and treatment time on the properties of the board were evaluated. The target board densities were relatively low, ranging from 0.40 to 0.70g/cm³. The properties [i.e., moduli of rupture (MOR) and elasticity (MOE) in both dry and wet conditions, internal bonding strength (IB), and water absorption (WA)] of the boards increased linearly with increasing board density. Steam pressure and treatment time also affected the board properties. The bending strength and IB were improved with increased steam pressure. A long steam treatment time contributed to low thickness swelling (TS) values and thus better dimensional stability. The appropriate steam pressure was 1.0MPa, and the treatment time was 10–15min. The properties for 0.55g/cm³ density boards under optimum conditions were MOR 12.6MPa, MOE 2.5GPa, IB 0.49MPa, TS 7.5%, and wet MOR 2.4MPa. Compared with the requirement of JIS 5908, 1994 for particleboard, kenaf binderless boards showed excellent IB strength but relatively poor durability.Part of this report was presented at the 19th Annual Meeting of the Japan Wood Technological Association, Tokyo, October 2001     

Early effects of four fast-growing tree species and their planting density on ground vegetation in Imperata grasslands

Ground vegetation development was studied under young plantations of Acacia mangium, A. crassicarpa, Gmelina arborea and Paraserianthes falcataria on an Imperata grassland site in South Kalimantan, Indonesia. The study was based on two separate trials: 1) a species trial with a spacing of 3×3 m, and 2) a spacing trial with progressively decreasing planting density. Both trials were established by use of intensive site preparation, NPK-fertilization, and weeding during the first year. Two years after planting and one year after the last weeding, ground vegetation in the first trial was dominated by Imperata cylindrica grass and shrubs Chromolaena odorata and Clibadium surinamense. In the open area (control) only Imperata grass appeared. Significant differences in total ground vegetation biomass (t ha^–1) between the tree species were as follows: G. arborea (0.2) A. mangium (1.4) A. crassicarpa (4.2) < P. falcataria(9.6) open area (11.4). The early results from the spacing trial showed similar trends in the hardwood species' abilities in Imperata suppression. Highly significant linear relationships existed in regression analysis between the distance between planted trees and the ground vegetation biomass as follows: G. arborea (r²=0.75), A. mangium (r²=0.95), A. crassicarpa (r²=0.97), P. falcataria (r²=0.96). Tree species and their planting density should thus be critically considered in forest plantation establishment on Imperata grasslands, since ground vegetation development plays a decisive role in fire susceptibility, maintenance requirements and the promotion of native species in plantations.     

Estimated stocks of organic carbon in mangrove roots and sediments in Hinchinbrook Channel,Australia

Aboveground and belowground root biomasses (Babove and Broot) were measured for young, isolated Rhizophorastylosa on Iriomote Island, Japan. The relationship between these two parameters was significant and given as the equation, Broot(g dry weight) = 0.394 × Babove(g dry weight) – 485 (r = 0.986). Multiple regression analyses also revealed good correlation between diameter and biomass of prop roots (Dprop and Bprop) and between prop root and root biomasses. Consequently, root biomass could be estimated from the measurements of diameter and biomass of prop roots using the multiple regression equation, Broot(g dry weight) = 80.0 ×Dprop(cm) + 0.86 ×Bprop (g dry weight) – 251. The relationship between DBH (diameter at breast height) and prop root biomass was also adequately described using an allometric equation.In Hinchinbrook Channel, Australia, redox potential (measured as Eh) and organic carbon stocks in the top 5cm of mangrove sediments were measured along a 600m transect from the frequently inundated, Rhizophora dominated zone on the creek edge, towards higher grounds, where Ceriops spp. became increasingly dominant. Eh values were about –60mV near the creek edge and increased to 260mV on higher grounds. Organic carbon stocks showed an opposite trend to Eh, with the values decreasing from about 360tCha–1 to 160tCha–1. At 18 sites, representing six different habitats, organic carbon stocks were also measured along with the DBH of mangrove trees. DBH was converted into aboveground biomass and then into root biomass using the equations obtained in the study on Iriomote Island. The average organic carbon stocks in the top 50 cm of sediments, aboveground biomass and root biomass were 296tCha–1, 123 tCha–1 and 52 tCha–1, respectively, and accounted for 64%, 25% and 11% of the total organic carbon stock.     

Examination of polychlorinated dibenzo-<Emphasis Type="Italic">p</Emphasis>-dioxins and polychlorinated dibenzofurans in process water of kraft pulp bleaching mill using chlorine dioxide from the aspect of environmental water quality

Process water of a pulp mill with extended kraft cooking, two-stage oxygen delignification, and chlorine dioxide bleaching was examined from the aspect of a new standard for environmental water quality in Japan. According to the new standard, the concentration of dioxins – polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, coplanar polychlorinated biphenyls – in environmental water is restricted to less than 1pg TEQ/l. We clarified that the concentrations of the dioxins in sewers in the chlorine dioxide stage and the alkali stage were less than 1pg TEQ/l and that the 2,3,7,8-tetrachlorodibenzofuran concentrations were 0.5pg/l or less. In addition, a main source of 1,3,6,8- and 1,3,7,9-tetrachlorodibenzo-p-dioxins in the process water seemed to be an agrochemical in water supplied from a river.