Optimization of formic/acetic acid delignification of Miscanthus × giganteus for enzymatic hydrolysis using response surface methodology

A Box-Behnken experimental design and response surface methodology were employed to optimize the pretreatment parameters of a formic/acetic acid delignification treatment of Miscanthus × giganteus for enzymatic hydrolysis. The effects of three independent variables, namely cooking time (1, 2 and 3 h), formic acid/acetic acid/water ratio (20/60/20, 30/50/20 and 40/40/20) and temperature (80, 90 and 107 °C) on pulp yield, residual Klason lignin content, concentration of degradation products (furfural and hydroxymethylfurfural) in the black liquor, and enzymatic digestibility of the pulps were investigated. The major parameter influencing was the temperature for pulp yield, delignification degree, furfural production and enzymatic digestibility. According to the response surface analysis the optimum conditions predicted for a maximum enzymatic digestibility of the glucan (75.3%) would be obtained using a cooking time of 3 h, at 107 °C and with a formic acid/acetic acid/water ratio of 40/40/20%. Glucan digestibility was highly dependent on the delignification degree.     

Evaluation of the yield potential and physicochemical properties of the biomass of Salix viminalis × Populus tremula hybrids

This study presents the characteristics of four Salix viminalis × Populus tremula hybrids, produced for the first time in the world grown in a three-year field experiment. Shoot weight per plant and major biomass yield components, including plant height, number of shoots per rootstock and shoot diameter, were determined. The infection severity caused by leaf rust (Melampsora sp.) was also evaluated. The biomass of three-year-old hybrid plants was subjected to chemical analyses and calorimetric tests to determine the energy value of biomass as solid fuel. Among the studied genotypes the highest yield was achieved by one of the studied hybrids. Its biometric parameters did not differ significantly from the standard genotype, and they were superior to the parameters of the maternal form. All Salix × Populus hybrids were more susceptible to rust infections than their maternal form and one hybrid was more resistant to infections caused by fungi of the genus Melampsora. Two hybrids have optimal biomass parameters as regards both calorific value and amount of carbon, hydrogen, sulfur and nitrogen.     

Genotype × environment interaction for zinc and iron concentration of wheat grain in eastern Gangetic plains of India

Zinc and iron are important micronutrients for human health for which widespread deficiency occurs in many regions of the world including South Asia. Breeding efforts for enriching wheat grains with more zinc and iron are in progress in India, Pakistan and CIMMYT (International Maize and Wheat Improvement Centre). Further knowledge on genotype × environment interaction of these nutrients in the grain is expected to contribute to better understand the magnitude of this interaction and the potential identification of more stable genotypes for this trait. Elite lines from CIMMYT were evaluated in a multilocation trial in the eastern Gangetic plains (EGP) of India to determine genotype × environment (GE) interactions for agronomic and nutrient traits. Agronomic (yield and days to heading) data were available for 14 environments, while zinc and iron concentration of grains for 10 environments. Soil and meteorological data of each of the locations were also used. GE was significant for all the four traits. Locations showed contrasting response to grain iron and zinc. Compared to iron, zinc showed greater variation across locations. Maximum temperature was the major determinant for the four traits. Zinc content in 30–60 cm soil depth was also a significant determinant for grain zinc as well as iron concentration. The results suggest that the GE was substantial for grain iron and zinc and established varieties of eastern Gangetic plains India are not inferior to the CIMMYT germplasm tested. Hence, greater efforts taking care of GE interactions are needed to breed iron and zinc rich wheat lines.     

Biomass production and nitrogen accumulation and remobilisation by Miscanthus × giganteus as influenced by nitrogen stocks in belowground organs

The nitrogen (N) requirement of dedicated crops for bioenergy production is a particularly significant issue, since N fertilisers are energy-intensive to make and have environmental impacts on the local level (NO₃ leaching) and global level (N₂O gas emissions). Nitrogen nutrition of Miscanthus × giganteus aboveground organs is assumed to be dependent on N stocks in belowground organs, but the precise quantities involved are unknown. A kinetic study was carried out on the effect of harvest date (early harvest in October or late harvest in February) and nitrogen fertilisation (0 or 120 kg N ha⁻¹) on aboveground and belowground biomass production and N accumulation in established crops. Apparent N fluxes within the crop and their variability were also studied.Aboveground biomass varied between 24 and 28 t DM ha⁻¹ in early harvest treatments, and between 19 and 21 t DM ha⁻¹ in late harvest treatments. Nitrogen fertilisation had no effect on crop yield in late harvest treatments, but enhanced crop yield in early harvest treatments due to lower belowground biomass nitrogen content. Spring remobilisation, i.e. nitrogen flux from belowground to aboveground biomass, varied between 36 and 175 kg N ha⁻¹, due to the variability of initial belowground nitrogen stocks in the different treatments. Autumn remobilisation, i.e. nitrogen flux from aboveground to belowground organs, varied between 107 and 145 kg N ha⁻¹ in late harvest treatments, and between 39 and 93 kg N ha⁻¹ in early harvest treatments. Autumn remobilisation for a given harvest date was linked to aboveground nitrogen accumulation in the different treatments. Nitrogen accumulation in aboveground biomass was shown to be dependent firstly on initial belowground biomass nitrogen stocks and secondly on nitrogen uptake by the whole crop.The study demonstrated the key role of belowground nitrogen stocks on aboveground biomass nitrogen requirements. Early harvest depletes belowground nitrogen stocks and thus increases the need for nitrogen fertiliser.     

Perennial O. sativa × O. rufipogon interspecific hybrids: I. Photosynthetic characteristics and their inheritance

A survey of 24 wild Oryza accessions identified Oryza australiensis and Oryza rufipogon as potential sources of enhanced photosynthetic rate for introgression into cultivated rice. Photosynthetic capacity per unit leaf area (CER) was associated with leaf N content but not with leaf chlorophyll concentration, flag leaf area, or specific leaf area. Eight fertile, perennial F₁ hybrids between O. sativa and O. rufipogon were grown in non-flooded soil, and CER was measured at flowering under saturating light. Two F₁ hybrids had greater CER than the average of 26.1 μmol m² s⁻¹. The F₂ progeny from these hybrids were screened for CER in the field, and segregants with even greater rates of photosynthesis were selected. The basis of high photosynthetic rate in the F₂ populations was not leaf thickness or leaf chlorophyll content. One F₂ line had exceptionally high CER and stomatal conductance. Broad-sense heritability on an individual plant basis for CER in two F₂ populations was 0.44 and 0.37. A highly significant offspring-parent regression of 0.89 for CER was observed in a replicated field evaluation (four blocks, five plants per plot) of 20 vegetatively propagated F₂ selections and their F₃ seedling progeny. Broad-sense heritability for CER on a plot-mean basis was estimated as 0.74 for both selected F_2:3 families and for the selected F₂ clones. Genetic resources in the genus Oryza may represent a source of alleles to increase leaf photosynthetic rate in the cultivated species, which we have demonstrated to be a heritable, though environmentally variable, trait in an O. sativa/O. rufipogon population.     

Morphological characteristics and composition of lipophilic extractives and lignin in Brazilian woods from different eucalypt hybrids

The morphological and chemical characteristics of the woods from several eucalypt hybrids from the Brazilian Genolyptus program were studied. The hybrids selected for this study were Eucalyptus grandis × E. urophylla (IP), E. urophylla × E. urophylla (U1 × U2), E. grandis × [E. urophylla × E. globulus] (G1 × UGL), and [E. dunnii × E. grandis] × E. urophylla (DG × U2). The analyses of the lipophilic extractives indicated a similar composition in all eucalypt hybrids, which were dominated by sitosterol, sitosterol esters and sitosteryl 3β-d-glucopyranoside. These compounds are responsible for pitch deposition during kraft pulping of eucalypt wood. Some quantitative differences were found in the abundances of different lipid classes, the wood from U1 × U2 having the lowest amounts of these pitch-forming compounds. The chemical composition and structure of lignins were characterized by Py-GC/MS and 2D-NMR that confirmed the predominance of syringyl over guaiacyl units and only showed traces of p-hydroxyphenyl units in all the woods, with the highest S/G ratio for G1 × UGL. The 2D-NMR spectra gave additional information about the inter-unit linkages in the lignin polymer. All the lignins showed a predominance of β-O-4′ ether linkages (75-79% of total side-chains), followed by β-β′ resinol-type linkages (9-11%) and lower amounts of β-5′ phenylcoumaran-type, β-1′ spirodienone-type linkages or β-1′ open substructures. The lignin from the hybrid G1 × UGL presented also the highest proportion of β-O-4′ linkages, and therefore, it is foreseen that the wood from this hybrid will be more easily delignifiable than the other selected Brazilian eucalypt hybrids. In complement to these chemical analyses, the morphological characterization of fibers, vessels and fines revealed that hybrid eucalypt clone DG × U2 presented the most interesting properties for the manufacture of paper pulps and biofuels.     

Transgressive variants for red pericarp grain with high yield potential derived from Oryza rufipogon × Oryza sativa: Field evaluation, screening for blast disease, QTL validation and background marker analysis for agronomic traits

Five transgressive variants (advanced breeding lines from BC₂F₅ and BC₂F₆ generation) were derived from a cross between the wild relative, O. rufipogon Griff. and O. sativa L. subsp. indica cv. MR219, a popular high yielding Malaysian rice cultivar. The aim of the study was to evaluate the pericarp colour of the grains along with yield potential and to validate quantitative trait loci (QTLs) for agronomic traits. The variants were screened against blast disease. Background marker analysis was also done for the promising variants. The field trials were carried out at a single location (due to containment purposes) over two seasons using randomized complete block design (RCBD) with three replications. A trait-based marker analysis was used to identify QTLs for validation in BC₂F₅ generation. Analysis of variance (ANOVA) showed that the seasonal factors influenced different agronomic traits. Variant G33 produced significantly (p < 0.05) higher yield (5.20 t/ha) than the control, MR219 (4.53 t/ha). Eighteen QTLs for different agronomic traits were identified in BC₂F₂ population in a previous study. Among them 14 QTLs were found in BC₂F₅ population of the present study. The yield of variant G33 was influenced by several QTLs viz. qGPL-1, qSPL-1-2, qSPL-8 and qYLD-4, which were introgressed from the donor parent revealed by background marker analysis using BC₂F₇ generation. Percentage (99%) of red pericarp grain of G33 and G34 in BC₂F₅ and BC₂F₆ generations indicated the stability of pericarp colour which was transferred from the wild relative. Variant G33 showed resistance against two pathotype of blast disease (Magnaporthe oryzae). Among the evaluated variants, G33 could be considered for inclusion in the cultivar development program for red rice with high yield potential and resistance to blast disease. This study demonstrated that the alleles from wild relative could improve the yield and yield related traits through allelic interaction, even though the phenotypic traits were inferior to the recurrent parent.     

Multiple-disease resistance in Vicia faba: Multi-environment field testing for identification of combined resistance to rust and chocolate spot

The aim of this work was to identify Vicia faba germplasm resistant both to rust and chocolate spot. A collection of 43 accessions of V. faba previously identified as chocolate-spot resistant was evaluated for rust and chocolate spot resistance in Egypt and in Spain. The genotype and genotype × environment (GGE) biplot analyses allowed the selection of 11 accessions resistant to both diseases in those locations. These 11 accessions were evaluated for rust in an additional field trial in Spain, all performing better than the susceptible check. The joint analysis of the 11 accessions in the four field trials where they had been evaluated revealed no significant effects either for genotype, environment or the genotype × environment interaction. They are hence promising sources of resistance, both for their low severities and their stable responses across the studied environments. This collection was also tested under controlled conditions against the Egyptian and the Spanish isolates of rust present in the field trials further underlining the stable performance of these genotypes. Finally, the effect of previous infection with chocolate spot on rust resistance was assessed under controlled conditions and no influence of it was found.     

High value triterpenic compounds from the outer barks of several Eucalyptus species cultivated in Brazil and in Portugal

The chemical composition of the lipophilic extracts of the inner and outer bark fractions of Eucalyptus grandis and Eucalyptus urograndis (E. grandis × Eucalyptus urophylla) cultivated in Brazil and Eucalyptus maidenii, cultivated in Portugal was studied by gas chromatography-mass spectrometry. The extracts were shown to be mainly composed of triterpenic compounds (along with mono and sesquiterpenes in E. maidenii) followed smaller amounts of fatty acids, fatty alcohols, and aromatic compounds.Triterpenic acids (mainly ursolic, betulinic and oleanolic acids), are particularly abundant in outer barks representing 5.2 g/kg, 5.7 g/kg and 9.3 g/kg in E. urograndis, E. grandis and E. maidenii outer barks, respectively. Although these compounds were found in considerably smaller amounts than those previously reported for Eucalyptus globulus, the total amounts of bark generated every year in South American pulp mills using E. urograndis and E. grandis, as well as the growth potential of E. maidenii plantations, the bark residues from these species are obvious candidates for the extraction of valuable triterpenic compounds.     

Pre- and post-inoculation activity of a protectant and a systemic fungicide for control of anthracnose fruit rot of strawberry under different wetness durations

A protectant fungicide (Captan, a.i. captan) and a systemic fungicide (Switch, a.i. fludioxonil + cyprodinil) were evaluated as pre- and post-inoculation applications for control of anthracnose fruit rot (AFR), caused by Colletotrichum acutatum, under a short (6 or 8 h) or long (18 or 24 h) wetting period. Evaluations were conducted for two seasons in Maryland and for two seasons in Florida. Both Captan and Switch were very effective for control of AFR when applied prior to inoculation, but control was more effective under the shorter wetting period. Switch was as effective when applied 4, 8, or 24 h post-inoculation as when applied before inoculation, but control was better under the short wetting period. Captan was effective when applied 4 or 8 h after inoculation under the short wetting period, but was ineffective at 24 h post-inoculation. Post-inoculation sprays of Captan were ineffective at any time under the long wetting period. The post-infection activity of Switch allows greater flexibility for managing AFR when fungicide applications are scheduled based on weather-based decision-support systems.     

Genotypic response of common bean to natural field populations of bean fly (Ophiomyia phaseoli) under diverse environmental conditions

Bean fly is a significant pest of common bean in semi-arid areas of East Africa. Apart from inadequate moisture in the dry land, bean fly simultaneously contributes negatively thereby adversely affecting bean productivity. The objectives of this study were to (1) identify sources of resistance to bean fly available in landraces, (2) confirm stability of host plant resistance in drought stress and (3) determine the effect of drought stress and seasonal variation on common bean genotypes in relation to bean fly attack for adaptability to the semi-arid areas of East Africa. Sixty four genotypes including landraces, bean fly resistant lines and local checks were evaluated for seed yield, 100-seed weight, days to maturity, plant mortality and pupae in stem in an alpha lattice design with two replications. This was under drought stressed (DS) and non-stressed (NS) environments and two treatments (insecticide sprayed and natural infestation) for three cropping seasons between 2008 and 2009. Genotypes differed in their reaction to natural bean fly attack under drought stressed (DS) and non-stressed (NS) environments over different cropping seasons. However, the effect of bean fly appeared to vary between the long rains (LR) and short rains (SR). It was observed that an increase in number of pupae per stem resulted in a higher plant mortality. The range of seed yield was from 345 to 1704 kg ha⁻¹ under natural infestation and from 591 to 2659 kg ha⁻¹ under insecticide protection. Seed yield loss ranged from 3 to 69%. The resistance of most of the bean fly resistant lines seemed to break down in presence of DS owing to their dismal performance. Screening of genetic resources in common bean to breed for host plant resistance to bean fly offers high potential of success if researchers take full advantage of the diversity available within the landraces.     

Effect of residual distillation water of 15 plants and three plant hormones on Scotch spearmint (Mentha × gracilis Sole)

Distillation waste water is a byproduct from steam distillation of aromatic crops, and is currently discharged into streams and rivers. We evaluated distillation waste water (extract) from 15 essential oil crops plus three plant hormones (methyl jasmonate, MJ; gibberellic acid, GA3; and salicylic acid, SA) as foliar spray for Scotch spearmint (Mentha × gracilis Sole). GA3 and Achillea millefolium extract decreased essential oil content. Hypericum perforatum extract increased α-pinene, whereas SA decreased it. H. perforatum extract increased β-pinene and sabinene concentrations relative to hormones but was not different from the control. H. perforatum also increased l-limonene, while SA and GA3 decreased myrcene and MJ and SA decreased l-limonene. Application of MJ and SA increased l-carvone concentration relative to the control and most other treatments. The sulfur concentration in plant extracts was positively correlated to β-caryophyllene. None of the residual distillation waters showed significant antimicrobial or antimalarial activity. The distillation waste water from essential oil crops may serve as a modifier for Scotch spearmint essential oil.     

Sequential extractions and structural characterization of lignin with ethanol and alkali from bamboo (Neosinocalamus affinis)

A sequential process with the combination of ethanol and alkali aqueous solutions was utilized to extract lignin from bamboo (Neosinocalamus affinis), a potential lignocellulosic material. In this case, the successive treatments of dewaxed bamboo with 70% ethanol at 80 °C, 0.2 and 0.5 M NaOH, 70% ethanol containing 0.6 M NaOH, and 1.0, 2.0, and 3.0 M NaOH at 50 °C, resulted in a total yield of acid-insoluble lignin fractions of 10.06%, corresponding to release of 62.25% original lignin from the cell walls. The lignin fractions obtained were then characterized by GPC, FT-IR, NMR spectroscopy, and sugar analysis. As compared to the alkali lignin fractions, the ethanol-soluble lignin fraction had a relatively higher molecular weight (2670 g/mol) and the content of carbohydrates primarily consisted of glucose 2.01% and xylose 1.90%. This suggested that the carbohydrate chains linked to lignin may increase the hydrodynamic volume of lignin and therefore increase the apparent molecular weight of the ethanol-soluble lignin. HSQC spectra analysis revealed that the alkali lignin fractions consisted mainly of β-O-4′ linkages combined with small amounts of β-β′, β-5′, β-1′ linkages, and p-hydroxycinnamyl alcohol end groups. Furthermore, minor amounts of esterified p-coumaric and ferulic acids were also detected in the lignins isolated.     

Advances in the identification and agrochemical importance of sesquiterpenoids from Bulnesia sarmientoi essential oil

Bulnesia sarmientoi Lorentz ex Griseb volatile oil was characterized by GC × GC-TOF-MS analysis. Major components were guaiol and bulnesol, followed by hanamyol. The enhanced sensitivity and superior resolution of GC × GC resulted in the identification of thus-far unreported oil constituents as β-guaiene, guaioxide, elemol, germacrene-B, eudesm-5-en-11-ol, γ-eudesmol, α-eudesmol and (−)-hanamyol. The insecticidal effect of B. sarmientoi oil and its main constituents (guaiol, bulnesol and hanamyol) on Spodoptera littoralis, Rhopalosiphum padi and Myzus persicae was studied. Guaiol affected the aphids in a dose-response fashion, showing low efficiency, while bulnesol and hanamyol were inactive. Both the oil and its constituents were also assayed for antifungal action against Fusarium spp. and phytotoxicity to Lactuca sativa. Among the pure compounds tested, bulnesol had a low-moderate effect on Fusarium moniliforme while hanamyol had a strong effect on Fusarium solani. Neither the oil nor the tested compounds affected L. sativa germination or radicle length, indicating that B. sarmientoi is not phytotoxic.     

The cellular structure of cork from Quercus cerris var. cerris bark in a materials’ perspective

Cork in the outer bark of trees is among the valuable raw materials of biological origin due to properties that result mainly from its cellular structure. Large scale commercial utilization of cork has been only achieved with cork from Quercus suber. Another oak species, Quercus cerris, also contains substantial, albeit not continuous, regions of cork that are clearly visible to the naked eye but are so far considered as a waste material.Bark samples of Q. cerris var. cerris trees were collected from the And?r?n province, Turkey. Cork portions were separated and their cellular structure was investigated with optical and electron scanning microscopy observations. The results were compared with Q. suber cork.Q. cerris cork has the typical features of cork tissues with a regular and radially aligned structure of suberized cells without intercellular voids, showing a ring structure and a distinction of earlycork and latecork cells. Solid volume fraction was estimated at 25% (22% in earlycork, 36% in latecork).In Q. cerris cork cells are smaller, cell wall thickness and solid volume fraction are higher, and the tissue is less homogeneous with a higher content of lignified inclusions than in Q. suber cork. These factors will negatively influence quality in regard to density and mechanical properties associated to elasticity. However, this does not impair its use for production of granulates and agglomerates, e.g. for insulation and energy absorption. Separation of the cork fraction from the bark is a step required before further processing and use.     

Sesquiterpenic composition of the inflorescences of Brazilian chamomile (Matricaria recutita L.): Impact of the agricultural practices

Matricaria recutita L. is one of the most common medicinal plants, included in all over the world pharmacopoeias due to, among others, the relevant health benefits of its sesquiterpenic compounds. This paper aims to study the impact of the agricultural practices of M. recutita L. on the occurrence of sesquiterpenic compounds. To fulfill this objective, a methodology that combines the headspace solid phase microextraction (HS-SPME) coupled with one-dimensional gas chromatography-quadrupole mass spectrometry detection (GC-qMS) was implemented. Thirteen populations from different geographic origins, agricultural practices, and harvest times, grown in Santa Catarina and Paraná states, in Brazil, were analyzed. The samples from organic practice showed a tendency to have lower amount of sesquiterpenic compounds than those from the conventional agricultural system. Eleven samples were classified as chemotype B (rich in bisabolol oxide B) and the remaining 2 were classified as chemotype A (rich in bisabolol oxide A). Predominance of chemotype B was observed concerning the agricultural practices (organic or conventional) or geographic origin (Santa Catarina or Paraná). In order to obtain a deeper insight into the sesquiterpenic compounds, comprehensive two-dimensional gas chromatography with time of flight mass spectrometry detection (GC × GC-ToFMS) was also applied, allowing to identify for the first time in chamomile 8 compounds.     

Growth and accumulation of caffeic acid derivatives in Echinacea angustifolia DC. var. angustifolia grown in hydroponic culture

In separate experiments conducted in 2007 and 2008, growth and accumulation of selected caffeic acid derivatives (CADs; i.e., caftaric acid, chlorogenic acid, echinacoside, caffeic acid, cynarin, p-coumaric acid, ferulic acid and cichoric acid) were determined in Echinacea angustifolia DC. var. angustifolia seedlings grown in hydroponic culture (floating raft system) at a density of 122 plant m⁻² (at planting). Plants were harvested 11 (2007) or 16 (2008) weeks after transplanting (i.e., 15 or 20 weeks after sowing). In both years, plants grew vigorously and at harvest approximately half of the plants under observation had developed one to three inflorescences. In 2008, the root yield (2940 kg ha⁻¹) harvested in nearly eight months from two consecutive hydroponic cultures was within the yield reported in the literature for field cultivations lasting two to four years. None of the selected CADs was found in the leaves, while the inflorescences (stem and capitulum) contained only caftaric acid and echinacoside at concentrations higher than the detection limits (0.05 mg g⁻¹ dry weight). Echinacoside, cynarin and chlorogenic acid were found in root tissues at concentrations ranging from 0.36 to 5.25 mg g⁻¹ dry weight. In all plant samples, echinacoside, which is the marker compound for E. angustifolia material, did not reach the minimum quality standard (10 mg g⁻¹ dry weight) for the production of standardized extract. We concluded that short-cycle, high-density greenhouse hydroponic culture stimulates plant growth and root production in E. angustifolia, but it does not ensure sufficient CADs accumulation in dried roots.     

Growth, yield and mineral content of Miscanthus × giganteus grown as a biofuel for 14 successive harvests

Miscanthus × giganteus, a perennial rhizomatous grass commercially used as a biofuel crop was grown in a field experiment on a silty clay loam soil for 14 years. There were 3 rates of fertilizer nitrogen (N), none (control), 60 kg N ha⁻¹ yr⁻¹ and 120 kg N ha⁻¹ yr⁻¹ as cumulative applications. The crop was harvested in winter and dry matter yield measured. N did not influence yield. Yield, which increased for the first 6 years, decreased in years 7 and 8, but then increased again and was highest in the 10th year averaging 17.7 t ha⁻¹ across all treatments. Differences in total production over the14 years were only 5% between the highest and lowest yielding treatments and averaged 178.9 t ha⁻¹ equivalent to 12.8 t ha⁻¹ yr⁻¹. In the first 10 harvests, 92% of dry matter was stem. Although the study showed N fertilizer was not required, it is considered that an application of 7 kg P ha⁻¹ yr⁻¹ and 100 kg K ha⁻¹ yr⁻¹ would avoid soil reserve depletion. Pesticides were not required every year and the crop can be considered as low input with a high level of sustainability for at least 14 years.     

Enzyme inhibitory and antioxidant activity of Melia azedarach L. naturalized in Anatolia and its phenolic acid and fatty acid composition

In the present study, acetylcholinesterase (AChE), butyrylcholinesterase (BChE), and tyrosinase inhibitory and antioxidant activities of the fruit and leaf extracts of Melia azedarach L. (Meliaceae) of Turkish origin were evaluated. Enzyme inhibitory activity of the extracts was tested in vitro using ELISA microplate reader. Antioxidant activity of the extracts was tested using 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging, ferrous ion-chelation, and ferric-reducing antioxidant power (FRAP) assays. Phenolic composition of the extracts was elucidated by high performance liquid chromatography (HPLC) and fatty acid compositions of the fatty oils of the fruits and leaves were elucidated by gas chromatography-mass spectrometry (GC-MS). The ethyl acetate extract from the leaves showed the highest inhibition against AChE (33.63 ± 1.40%) and BChE (92.89 ± 3.05%). The methanol extract from the leaves exerted the best antioxidant activity in DPPH radical scavenging and FRAP assays, while the ethyl acetate extracts of the fruits and leaves had the most notable effect in metal-chelation assay.     

Isolation and characterization of EMS-induced Dy10 and Ax1 high molecular weight glutenin subunit deficient mutant lines of elite hexaploid wheat (Triticum aestivum L.) cv. Summit

The mixing properties of the dough are critical in the production of bread and other food products derived from wheat. The high molecular weight glutenin subunits (HMW-GS) are major determinants of wheat dough processing qualities. The different alleles of the HMW-GS genes in hexaploid wheat vary in their effect on dough quality. To determine the contribution of the individual HMW-GS alleles, lines deficient in HMW-GS proteins were generated by chemical mutagenesis in the elite bread wheat Triticum aestivum cv. Summit. In this report we describe the identification and characterization of Dy10 and Ax1 deficient lines. Examination of the effect of Dy10 and Ax1 deficiency on dough rheological properties by mixography showed shorter mixing time to reach peak resistance, and weaker and less extensible doughs relative to the wild type control. This is the first time that the role of Dy10 in vivo has been examined apart from the Dx5 + Dy10 allelic pair combination.