A Method of Solving the Structural Fuzzy Finite Element Equilibrium Equations

Based on resolution of interval numbers and fuzzy resolution theorem,we develop a method of solving the structural fuzzy finite element equilibrium equations. A lot of calculations and analyses show,the method presented in this paper is correct and feasible.     

Finite Element Analysis of the Influence of Steel Strength on Beam-to-column Composite Connections

Because high material strength and composite load-bearing are emphasized in constructing members for high-rise steel frame structures, in a composite connection, steel strength has a dramatic influence on both the bearing performance and the composite action of the concrete slab. Based on a finite element analysis, we discuss the composite effect and the connection breaking mode, focusing on the performance change of the composite effect in adopting high strength steel. It can be found from the results that, along with the improvement of the steel strength, the elastic and plastic ultimate strength of the composite connection will increase, the ductility will decrease to a certain extent, and the composite effect of the concrete slab will diminish. The collapse of the concrete in a positive moment side contacting the column flange is viewed as the limiting state of the connection.     

Finite Element Programming Based on Template Chain Structure

Traditional Finite Element Method is the structuralization programming method and the structuralization language (such as FORTRAN). Its data store uses fixed array structure, which makes the expanding ability of program limited, code's reuse ratio low, debugging complex. The template is an opposite new important characteristic of the object-oriented programming language C++. The template can quickly establish class library so as to increase greatly the development speed of the large software. The object-oriented programming concept is applied to finite element method. According to the nature of the finite element analysis, the classes and their methods, which describe virtual element, node, material etc., have been developed and implemented using the object-oriented programming language C++. The elements, nodes and materials are stored by chain. Many type's elements are stored mixedly by polymorphism characteristic. The program is implemented and a instance is given to show the programming of finite element method. The results show that the period of programming and debugging is obviously shorter than that of traditional method; the code's utilization ratio is also increased obviously.     

The Finite Element Back Dealing and Object Design of Complex Joist frame Structuer

A simulation design method of the finite element analysis was described using object oriented programs.A data management class TSTRUCT of the large joist structure was also defined.     

Coupled Thermo-Elastic Contact Finite Element Method and It''s Application in Gearing

A new finite element method is presented in this paper to analyze the thermo- elastic contact problem with heat input on meshing tooth faces. The computational model of meshing gear has been established and the frictional heat input on meshing tooth faces is estimated. In addition, 2-D finite element analysis program for this kind of problem is listed. The test and practical examples are given to show the validity and versatility of this method.     

Boundaty Element Method for Analysis of Thick Plates on Two- Parameter Elastic Foundations

This paper discusses the Reissner's plates on elastic foundation.The elastic foundation is considered as two- paramerer and its effect to thick plates are taken into account by a set of govering differential equations. According to the foundamental solutions for bending problem on two- parameter foundation derived, three boundary integral equations denoted by generalized displacement functions are established. This method is suitable to solve the bending problem of thin or thick plates on two- parameter foundation with arbitary boundary condition, arbitary shape and arbitary load conditions     

Parametrical Finite Element Modeling for Framed Structure Based on Patran Software

In order to use FEM for engineer to anlysis structures by inputing only the designing parameters, the parametrical finite element software of a framed structure is developed, which has the functions of automatically modeling, adding constraints and loads, showing the results by inputing the changeable parameters. The validity of the software is proved by actual example.     

Application of Extended Finite Element Method to Fracturing Analysis of Gravity Dam

The extended finite element method(XFEM) presented in recent years is a new and effective method for discontinuity analysis,especially fracture problem analyses.The basic XFEM principle is introduced and the technique for fracture analysis is presented.The fracturing process of a gravity dam is simulated by XFEM,and the rules of stresses and displacements distribution are analyzed.Compared with the classical finite element method,the crack growth in the gravity dam can be modeled by XFEM without making the crack surface associate with the finite element mesh and setting dense mesh near the crack tip as well as remeshing after crack growth.The cumbersome work and disadvantages in conducting fracturing analysis by the finite element method thus can be avoided.The predominance of this method for dam fracturing analysis is displayed.     

Hyperelastic Constitutive Relations and Finite Element Formulation for Porous Silicone Rubber

The strain energy density function which was decoupled into isochoric parts and volumetric parts is presented for describing mechanical behaviors of compressible porous silicone rubber material,the constitutive model is then attained.The finite element formulation for isotropic hyperelastic porous silicone rubber is developed by use of total Lagrangean method.     

Application of ANSYS to Finite Element Analysis for Nonlinear Masonry Structures

ANSYS has become an effective tool for finite element analysis of masonry structure, but there is few common conclusions for reference. According to the characteristics of ANSYS and the essence of the analysis, some key problems in finite element analysis of masonry structure with ANSYS, such as structural modelling, material constitution, the damage criterion, iterative algorithm, convergence criterion, simulation of prestressing force and so on, are discussed in this paper. Based on the test results of typical masonry structures, the applicability of ANSYS to masonry structural analysis is studied and some suggestions for the application of ANSYS are presented.     

Finite Element Method of 3D Stable Heat Conduction of Steel Fluid in Continuous Casting Moulds

The heat transfer of steel fluid in continuous casting mould is a stable process and can be depicted with three-dimensional stable heat conduction equation depending on tension speed. The corresponding finite element equation, including the first, second and third boundary conditions, is deduced out with Galerkin residual method. The coded FEM program is used to analyze the temperature distribution of Q235 steel in continuous billet casting mould. The method proposed is a foundation of thermo-mechanical coupled analysis for the formation of solidified shells and stress in the shells in continuous casting.     

Finite Element Analysis of Spatially curved Rods

A system of governing equations for spatially curved rods are derived in natural coordinate,and an analytic solution to the statically determinate problem is given.Based on the solution,a generalized displacement model for element of curved bars is developed,which is convergent and accurate.     

Mixed Finite Element Method for Dynamic Problems of Fluid Saturated Biphasic Porous Media

Based on the fluid saturated biphasic porous media model deduced from mixture theory,a finite element formulation with u S u F p variables for dynamic response analysis is given out.This method overcomes the difficulty of choosing suitable penalty parameter in penalty finite element method,and the accuracy of pressure distribution obtained with the mixed finite element method is higher than the penalty finile element method.An iterative solution method is suggested to solve the system of equations whose coefficient matrices are non positive definite.It is concluded from patch test that the order of interpolation function for pressure variables must be higher than that of displacement variables of solid phase.     

Dynamic Constitutive Model of Steel Fiber Reinforced Concrete and Its Finite Element Method

Taking the split Hopkinson pressure bar(SHPB) test data as training samples, an implicit dynamic constitutive model of steel fiber reinforced concrete(SFRC) was proposed with the improved BP neural network program. On the basis of ABAQUS/Explicit, a user defined material subroutine VUMAT was compiled with FORTRAN language, embedding with the neural network constitutive model into finite element calculation. With SFRC structure＇s response under impact load as case study, it is shown that the constructed constitutive model and its finite element method are effective.     

Evaluation of the Energy Release Rate of Three-point-bending Beam Using Finite Element Method

Calculation of the energy release rate with finite element method (FEM ) is conducted. The concrete beam model is meshed using a method without need of considering the crack-tip singular element. Two columns of nodes, which belong to the right-and left-parts of the beam, respectively, are generated on the central line of the model and released one after another in a proper sequence. Energy release rate is evaluated based on the virtual crack closure technique. Comparison between the calculated values and theoretical values is made, which shows that they are in good agreement.     

Elastic Analysis of Beam-Plate Foundation with Winkler Model

The beam-plate foundation is divided into two parts.The boundary element methods areapplied to analyze the plates with Winklermodel.The finite element methods are used to evaluate thebeams The coupling equation is obtained by the coodination of both force and displacement.     

A Finite Element Method for Quasi Static Problems of Two phase Porous Media

For the quasi static problems of two phase porous media,the velocity variable of fluid phase can be eliminated as the viscosity of fluid is neglected.The corresponding governing equations,with displacement of solid phase and pore pressure as basic variables,as well as the boundary and initial conditions are given out.Finally a mixed finite element formula with u S-p variables is obtained with weighted residual method.This method has lesser nodal variables and higher accuracy of pressure distribution.     

Post-process of Finite Element Method in Electrical Impedance Tomography

In the research of electrical impedance tomography (EIT), each calculation may produce a large amount of data(such as conductance , resistance etc.). The rule of these data is not clear and is hard to understand. How to express the calculation result by means of image in order that such parameters as conductance and resistance can be grasped from the image is significant in analyzing and understanding the calculation result and is helpful to the doctor. This paper has discussed the realization of the post-process of finite element method in electrical impedance tomography and we have developed the software of the post-process of finite element method using Visual C++ .NET and OpenGL. Some problems in drawing the contour line and color contour band have been solved properly.