Genetic responses in milling,flour quality,and wheat sensitivity traits to grain yield improvement in U.S. hard winter wheat

A rising global population necessitates continued genetic improvement of wheat (Triticum spp.), but not without monitoring of unintended consequences to processors and consumers. Our objectives were to re-establish trends of genetic progress in agronomic and milling traits using a generational meter stick as the timeline rather than cultivar release date, and to measure correlated responses in flour quality and human wheat-sensitivity indicators. Grain yield and kernel size showed stepwise increases over cycles, whereas wheat protein content decreased by 1.1 g/100 g. Reduced protein content, however, did not result in lower dough strength pertinent to bread baking. A novel method of directly testing gluten elasticity via the compression-recovery test indicated a general increase in gluten strength, whereas the ratio of total polymeric to total monomeric proteins remained stable. Also showing no change with genetic progress in yield were flour levels of gluten epitopes within the key immunotoxic 33-mer peptide. The oligosaccharide fructan, present in milled and wholemeal flours, increased with increasing grain yield potential. While yield improvement in U.S. bread wheat was not accompanied by a decline in gluten strength or systematic shift in a key wheat sensitivity parameter, the unanticipated rise in total fructans does implicate potentially new dietary concerns.     

Pilot scale production of a non-immunogenic soluble gluten by wheat flour transamidation with applications in food processing for celiac-susceptible people

Celiac disease (CD) is an immune-mediated disease triggered by wheat gluten and related prolamins. A lifelong gluten-free (GF) diet is mandatory to normalize the intestinal mucosa. We previously found that transamidation by microbial transglutaminase of gluten was effective in suppressing the gliadin-specific inflammatory response in CD patients without influencing the main technological properties of wheat flour or semolina. In this study, we produced on a pilot scale a soluble form of transamidated gluten (soluble protein fraction, spf), characterised by a high protein content (88 mg/ml), while native gluten was dramatically reduced (32 ± 2 ppm; R5-ELISA). Using HLA-DQ8 transgenic mice as a CD model, we found suppression of interferon-γ secretion in gliadin-specific CD4⁺ T cells challenged with spf-primed dendritic cells. In terms of functional properties, spf showed both solubility and emulsifying activity values within the range of commercial soluble glutens. Notably, dough prepared by mixing rice flour with spf could leaven. After baking, blended rice bread had a higher specific volume (2.9 ± 0.1) than control rice bread (2.0 ± 0.1) and acquired wheat-like sensory features. Taken together, our results highlighted the technological value of transamidated soluble gluten to improve both nutritional and sensory parameters of GF food.     

Variability and cluster analysis of arabinoxylan content and its molecular profile in crossed wheat lines

Non-starch polysaccharides (NSP) in cereals, after starch and gluten proteins, determine the technological and nutritional properties of flour, dough and end product. From NSPs, the arabinoxylans are the most important components studied in wheat nowadays. The novelty of our study is the investigation of the variability and clustering ability of the wheat lines based on different quantitative and qualitative traits of arabinoxylans. The quantitative properties, the total and the water-extractable arabinoxylan content of wheat flours were measured separately by gas chromatography. The qualitative property referring to the structure of the molecule was the molecular weight distribution measured by size exclusion liquid chromatography. According to the results the variability of arabinoxylan properties in the breeding lines varied between wider ranges then the values measured for the parental varieties. The correlation between the quantitative parameters, and a trend between quantitative and qualitative parameters were described. During the cluster analysis, the parents were well separated into different groups. The parameters that played an important role in the clustering were the ratio of the probability of occurrence of molecular size ranges along with the quantitative traits of AX. The selected samples can be used for further targeted breeding while the methodology was used in this work can be suitable for selecting lines/varieties for special food or other industrial applications.     

Soluble arabinoxylans extracted from soft and hard wheat show a differential prebiotic effect in vitro and in vivo

Arabinoxylans (AX) are part of dietary fiber. They are currently under study due to their potential prebiotic effect. Wheat whole grain flours contain all the grain layers and, therefore, present a higher arabinoxylan content than white flour. It is known that the chemical structure of these compounds varies with the type of wheat cultivar and the tissue from which they are extracted. In this work, water soluble extractable arabinoxylans (WE-AX) from two types of wheat whole flours (hard and soft) were extracted. We characterized the molecular size distribution and the potential prebiotic effect of those extracts. The prebiotic effect was evaluated in vitro and confirmed in vivo. Bacterial group abundance (Lactobacillus, Bifidobacterium, Clostridium, Enterococcus, Bacteriodes and total bacteria) was determined by quantitative RT-PCR. The molecular size of AX from hard wheats was significantly higher than AX from soft wheats. Both extracts showed potential prebiotic activity by increasing the growth of beneficial bacteria in vitro and in vivo, decreasing the pathogens in the profile of intestinal microorganisms and increasing the amount of short chain fatty acids in the intestine. WE-AX from hard wheat showed a higher prebiotic activity. Prebiotic effect assessed in vitro and in vivo assays showed a significant correlation between both types of analysis. This finding suggests that the in vitro indices performed allow predicting the potential prebiotic effect in vivo.     

Gluten proteome comparison among durum wheat genotypes with different release date

In order to deepen insight into durum wheat prolamin composition in relation to both end use quality and gluten related disorders, a phenotyping of four genotypes of different release date and technological performance was carried out. A proteomic approach integrated with the evaluation of protein aggregation level, amino acid composition and reactivity to G12 monoclonal antibody, was adopted. The degree of polymerization, estimated as unextractable polymeric proteins (UPP), was positively influenced by Cys-rich proteins (Glu-B3 LMW-GS), with Saragolla showing up to 40% higher values than other genotypes. The proteomic assessment allowed to identify proteins involved in gluten related disorders. In particular, ω5-gliadin involved in wheat allergy (WA), resulted markedly over-expressed in the old landrace Dauno III, up to four-fold than in modern Saragolla. A marked influence of genotype on the expression level of gliadins containing toxic epitopes (TECP) was observed with the more recent genotypes showing lower values (−53%). Also, reactivity to G12 moAb resulted higher in the two old genotypes consistently to their higher celiac disease (CD) toxicity evaluated by the proteomic approach. In conclusion a better gluten composition for processing seems to be associated to a lower expression level of CD toxic peptides and Tri a 19.     

Predicting water absorption of wheat flour using high shear-based GlutoPeak test

Selection for water absorption, a fundamental wheat quality parameter, has been a challenge in wheat breeding programs due to limited wheat materials available for milling and consequent time-consuming farinograph test. Hence, a high shear-based method, which requires 8 g of flour and less than 10 min per test, was proposed to predict flour water absorption using the Brabender GlutoPeak instrument. Highly significant positive linear relationship (r² = 0.97) was found between GlutoPeak maximum torque and farinograph water absorption for 83 flour samples prepared with Bühler test mill from wheat lines under evaluation in the Canadian wheat variety registration trials. Similar strong correlation (r² = 0.96) was obtained from flours (n = 63) prepared with Quadrumat Junior laboratory mill using small amount of wheat. Flour prepared either with Bühler test mill or Quadrumat Junior mill can be used for predicting water absorption effectively. GlutoPeak maximum torque was found to be independent of dough strength (r² = 0.02) as measured by extensigraph. GlutoPeak test can be a powerful tool for rapid and reliable prediction of water absorption of wheat flour.     

Impact of ethanol,succinic acid,and the combination thereof at levels produced during sponge fermentation on hard wheat,soft wheat,and durum wheat farinograph rheology

The sponge and dough mixing process is one of the most common in the world, yet the mechanistic understanding of this process has yet to be sufficiently explored. In this study, aqueous solutions of ethanol, succinic acid, and their combination were prepared at concentrations intended to replicate fermentation times of 3, 4 and 6 h. These solutions were added to a farinograph mixer to make dough using hard wheat, soft wheat, and durum wheat flour. The results indicate that these yeast metabolites (ethanol, succinic acid) impact the mixing resistance, peak mixing value, and dough mixing stability in each of the flour types, likely primarily affected by the ratios of gliadin to glutenin and LMW glutenin in each flour type. Results suggest a stabilizing non-covalent interaction imparted by gliadin at peak mixing time, a stabilizing effect of HMW glutenin during break down, and synergistic effects of ethanol and succinic acid that leads to a faster rate of breakdown in later stages of mixing. It also suggests an increase in mixing resistance when acidulants are added to durum wheat dough. Taken together, this study adds new insights on the sponge and dough mixing process in a way that has not previously been conducted.     

Effects of wheat tempering and stone rotational speed on particle size,dough rheology and bread characteristics for a stone-milled weak flour

The poor technological performance of weak wheat flours means that they are usually considered difficult to be transformed into satisfactory bread. During milling, there are several settings that can affect flour characteristics. In this study, we tested two operative parameters that have the potential to affect flour quality – stone rotational speed and wheat tempering. Tempering moistures were set at 11%, 13%, 15%, and 17%, while stone rotational speeds were set at 173, 260, and 346 rpm. Both factors were found to affect operative milling parameters, notably flour yield, process productivity and specific energy consumption. Grain moisture had a significant effect on both dough rheology and bread characteristics (dough stability, tenacity, and extensibility). Dough stability was maximum at 13% moisture. Dough tenacity decreased as moisture increased, while extensibility increased as moisture increased. Bread specific volume and crumb specific volume were improved at 13% and 15% moisture. In conclusion, wheat tempering can be used to improve the potential of a weak flour and bread characteristics, while stone rotational speed affects operative parameters and white flour yield.     

Genotypic variations in zinc accumulation and bioaccessibility among wheat (Triticum aestivum L.) genotypes under two different field conditions

Zinc (Zn) is an essential micronutrient for human health. Breeding zinc-rich crop genotypes is considered as potential solution to Zn deficiency. In this study, variation of Zn uptake, accumulation, distribution and the estimated bioaccessibility among 30 wheat genotypes across two locations were investigated with field experiments. A significant difference in grain Zn concentrations occurred across the two locations, with the corresponding values of 55.24 and 57.14 mg kg⁻¹. Grain Zn concentration was significantly and positively correlated with grain Mn concentration (0.698**, 0.617** for two locations). The estimated grain Zn bioaccessibility also showed a significant difference, a trend similar to grain Zn concentrations but with lower values (13.87 and 13.49 mg Zn d⁻¹ for two locations). These results indicate that the interaction of locations * genotypes may play an important role in grain Zn concentrations and Zn bioaccessibility.     

Spatial distribution of functional components in the starchy endosperm of wheat grains

The starchy endosperm of the mature wheat grain comprises three major cell types, namely sub-aleurone cells, prismatic cells and central cells, which differ in their contents of functional components: gluten proteins, starch, cell wall polysaccharides (dietary fibre) and lipids. Gradients are established during grain development but may be modified during grain maturation and are affected by plant nutrition, particularly nitrogen application, and environmental factors. Although the molecular controls of their formation are unknown, the high content of protein and low content of starch of sub-aleurone cells, compared to the other starchy endosperm cells types, may result from differences in developmental programming related to the cells having a separate origin (from anticlinal division of the aleurone cells). The gradients within the grain may be reflected in differences in the compositions of mill streams, particularly those streams enriched in the central and outer cells of the starchy endosperm, respectively, allowing the production of specialist flours for specific end uses.     

Quantitative LC-MS proteoform profiling of intact wheat glutenin subunits

Methodology for the quantitative analysis of intact glutenin proteins by ESI-LC-MS was developed with 1 Da mass resolution, constituting the first published application of proteoform profiling to plant biology. Two parent lines and 28 F5 crosses were analyzed in two blocks, 14 months apart. Control sample data were used to align retention times and normalize abundance between sample sets. A total of 4622 observations of 347 distinct proteoforms between 17 899 and 88 744 Da were observed. Proteoform abundances spanned a 1000-fold range and were linear (r² > 0.990) with dilution. A novel method for the objective elimination of low intensity, noise-dominated data using replicate variability within the dataset is presented. Two abundant PTMs were detected; one known but uncharacterized Bx and Dy high-molecular-weight glutenin subunit (HMWGS) PTM and the other in 24 low molecular weight proteoform pairs. Finally, 16 abundant proteoforms were detected in progeny but not in either parent. This application should increase the statistical power of correlations between gluten complement and functional data and drive the detection of novel PTMs that may indicate differential regulation of the cellular processes related to quality.     

Application of an orcinol-ferric chloride colorimetric assay in barley and wheat accessions for water-extractable and total arabinoxylan

Arabinoxylan is an important hemicellulose potentially affecting wheat baking qualities, barley malt quality, and may impart prebiotic benefits. Water-extractable (WEAX) and total arabinoxylan (TOAX) were characterized in 204 wheat and barley accessions, respectively, using an orcinol-ferric chloride assay. WEAX measurement accuracy was optimum when glucose concentration was greater than 12–13 times pentose concentration. The modified method removed enough excess glucose spectral absorbance to make the corrected and uncorrected lines different, but still significantly correlated (p = 0.009, R = 0.94). Mean WEAX (expressed as percentage WEAX of TOAX) for the wheat accessions was 15.90%, ranging from 8.82% to 24.87%, and for barley accessions WEAX the mean was 7.10%, and ranged from 2.98% to 13.86%. Conclusions are 1) the assay is useful for a breeding program because of its semi-high throughput design for the simultaneous analysis of 16 (WEAX) to 40 (TOAX) barley lines or 24 (WEAX) to 40 (TOAX) wheat lines, 2) the trichromatic measurement reduces the impact of glucose, and 3) the broad range of WEAX measured showed that barley and wheat accessions vary in their extractable and unextractable components.     

Contributions of individual and combined Glu-B1x and Glu-B1y high-molecular-weight glutenin subunits to semolina functionality and pasta quality

Durum wheat is an important food crop used primarily for pasta production. High-molecular-weight glutenin subunits (HMW-GS) encoded by the closely linked genes Glu-B1x and Glu-B1y are known for their combined effects on pasta quality, but their individual contributions and interactions remain poorly understood. In this study, we show that individual loss-of-function mutants of Glu-B1x (ΔBx6) and Glu-B1y (ΔBy8) were associated with significant reductions in gluten strength compared to the wildtype, with stronger effects in the ΔBxy double mutant. Reductions in gluten strength were reflected in reduced mixograph and alveograph parameters, gluten index, faster extrusion flow rates and increased cooking loss. Interestingly, the Glu-B1x mutation was also associated with significant increases in grain and semolina protein content, increased pasta firmness, reduced starch viscosity and increased amylose in ΔBx6 and ΔBxy. In general, the ΔBx6 mutation had stronger effects than the ΔBy8 mutation, and significant interactions between the two genes were frequent. In addition to the basic knowledge gained on the individual effects of the Bx6 and By8 subunits and their interactions, the genetic stocks developed in this study provide useful tools to study the effects of natural or synthetic HMW-GS on pasta quality parameters in a background lacking endogenous HMW-GS.     

Sprouting as a pre-processing for producing quinoa-enriched bread

The impact of 48 h sprouted quinoa (SQ) was assessed in bread-making. Wheat flour (WF) was replaced with SQ at different levels (i.e., 10:90, 20:80 and 30:70, SQ:WF ratio). Once the optimal replacement level of SQ was identified, the bread-making performance of this ingredient was compared with those of pearled quinoa (PQ), commonly used in bread-making.Starch pasting properties and gluten aggregation behavior were not strongly affected at 20:80 level. Regardless the replacement level, SQ caused an increase in dough water absorption and in softening degree, and a decrease in stability, suggesting weakening of the gluten network. During leavening, SQ improved dough development and gas production, due to increased sugar content (i.e. maltose, sucrose and D-glucose). The best bread-making performance (highest bread specific volume and lowest crumb firmness) was obtained at 20:80 replacement level. Compared to PQ, SQ exhibited the best leavening capacity (high dough development, gas production and gas retention) and bread properties (high specific volume and low crumb firmness), likely due to its higher sugar content. Moreover, 20SQ bread was characterized by a decreased bitterness assessed by electronic-tongue. In conclusion, sprouting might be considered a valid alternative to pearling to improve the characteristics of quinoa enriched bread     

Effect of curdlan on the quality of frozen-cooked noodles during frozen storage

Frozen-cooked noodles (FCN) and its components undergo quality changes during frozen storage, such as reduced textural and cooking qualities, weakened gluten network, and damaged starch properties; thus, storage condition is a critical factor affecting the final quality of FCN. In this study, in view of the thermoirreversible high-strength gel property (at ≥ 80 °C) of curdlan, strong hydrophilicity, and freeze-thawed stability of high-strength gel prepared from curdlan powder, the effect of curdlan on the quality of FCN during frozen storage was first evaluated. The results showed that curdlan was effective in reducing cooking loss, enhancing water absorption, and improving textural properties of FCN; the improving effect presented a trend of first increasing and then decreasing with the amount of increasing curdlan (0.1%–0.9%); and the addition of 0.5% curdlan was most effective in improving the quality of FCN. Thermal gravimetric analysis indicated that curdlan enhanced thermal stability of FCN, implying curdlan could strengthen the gluten network. Meanwhile, structural observations revealed that, during frozen storage, FCN with added curdlan exhibited a more continuous and compact gluten network accompanied with more uniform and smaller ice crystals. Thus, curdlan is desirable to be used as a novel gum in FCN to provide specific functionality and minimize the negative effect of frozen storage. This study provides new insights into the quality improvement of FCN and further expands the application potential of curdlan in food industry.     

Characterization of the FODMAP-profile in cereal-product ingredients

Cereal-based products, such as bread, are staple foods in the western diet. Due to the nature of their basic ingredients and the diversity of recipes, the amount of fermentable short-chain carbohydrates (FODMAPs) in those products may be high. This study characterized the FODMAP-profiles of a broad range of cereal-product ingredients, serving as a basis for low FODMAP product development. Different cereals, pseudo-cereals, gluten-free flours, pulses, pulse protein ingredients, commercial sprouts, and other cereal-product ingredients were analyzed, using anion-exchange chromatography with electrochemical detection. Wheat and related cereals were high in fructans. Pulses, such as peas contained high galactooligosaccharides (GOS) amounts. Whereas GOS levels in pulse protein ingredients varied, depending on their production. Gluten-free flours, for instance, rice-flour, showed low FODMAP-profiles. Amongst those, buckwheat, which does not contain any of the FODMAPs investigated, contained high amounts of other soluble non-digestible carbohydrates, namely fagopyritols; these may have a similar effect on a sensitive gut as GOS. Finally, ingredients contained mainly high levels of fructans and GOS. Yet, the analysis of commonly consumed commercial cereal products, including bread, pasta, crackers and biscuits, highlighted the relevance of lactose, fructose in excess of glucose and polyols. These products serve as benchmarks for further product development.     

Effect of high temperature stress during ripening on the accumulation of key storage compounds among Japanese highly palatable rice cultivars

High temperature stress during ripening increases the frequency of chalky grains, resulting in a lower market value for rice (Oryza sativa L.). Changes in starch properties and the accumulation pattern of storage proteins are proposed to be related to the occurrence of chalky grains. This study investigated changes in the accumulation of key storage compounds in the grains of Japanese highly palatable rice cultivars, subjected to high temperature stress when grown in a growth chamber and the field. The 13 kDa prolamin content was significantly reduced in a highly heat-sensitive cultivar, Tsukushiroman, whereas the 13 kDa prolamin content was not affected in a heat-tolerant cultivar, Genkitsukushi, even in a high temperature chamber condition (31/26 °C day/night), when compared with the control chamber condition (26/21 °C day/night) for both genotypes. In addition, grains grown in field conditions revealed that severely chalky grains had less 13 kDa prolamin than perfect grains in all five genotypes. Changes in amylose content and the distribution of amylopectin chain lengths did not explain the difference in grain appearance both for chamber and field experiments. These results strongly suggest that physiological processes linked with the synthesis of 13 kDa prolamin are associated with grain appearance in Japanese highly palatable under high temperature stress.     

Benzoxazinoid and alkylresorcinol content,and their antioxidant potential,in a grain of spring and winter wheat cultivated under different production systems

The health-promoting properties of the grains of common wheat (Triticum aestivum L.) are associated with the presence of unique phytochemicals. This study determines the profile of alkylresorcinols (ARs) and benzoxazinoids (BXs) in T. aestivum spring and winter cultivars grown in Poland under the two different production systems: conventional and organic. Wheat grain extracts were subjected to qualitative and quantitative UPLC-UV-MS/MS analyses. The ARs profile consisted of five 5-n-alkylresorcinol derivatives, among which 5-n-heneicosylresorcinol (C21:0) and 5-n-nonadecanylresorcinol (C19:0) predominated; while six different BXs were determined in hydrothermally treated grains. Our research shows significant differences in the contents of ARs and BXs among wheat cultivars, as well as the two production systems used. Organically grown varieties had their total contents of ARs and BXs significantly higher than those grown conventionally. Another aim of the study was to determine the antioxidant capacity of alkylresorcinol extracts from tested wheat cultivars. The quantitative TLC-DPPH• method for determining the antiradical capacity of wheat ARs extracts was developed. We observed a positive relationship between the free radical scavenging activity of extracts and the total amount of ARs. The biological activity research is important for developing value-added wheat cultivars, having an improved profile and composition of nutritional substances.     

Variation in avenanthramide content in spring oat over multiple environments

Avenanthramides (AVNs), a group of phytochemicals which are unique to oats, provide health benefits through antioxidant activity and other bioactivities. In this study, we explored genotype-by-environment interactions and heritability for AVN concentrations in oats. Avenanthramide concentrations were quantified for 100 breeding lines and cultivars at three locations over two years. While year and environment had an influence on AVN concentrations, with the influence of year being more apparent than that of environment within a year, genotype had the largest impact on AVN concentration. All three major AVNs were found to be heritable. Two methods of calculating heritability on a line mean basis were used. The statistical method yielded heritability estimates of 0.34, 0.39, and 0.41 for AVN 2c, AVN 2p, and AVN 2f, respectively. By comparison the traditional plant breeding method yielded heritability estimates of 0.82, 0.88, and 0.89 for AVN 2c, AVN 2p, and AVN 2f, respectively, indicating that expected gains will be dependent on the scale of the breeding program, the number of target environments, and climate variability. The estimated heritabilities and the 11-fold range in AVN concentrations in the 100 genotypes studied provided evidence that variability for AVN concentration should allow breeding progress for higher AVN concentration.