Simulated yield and quality distribution of sawn timber from final felling in a Norway spruce [Picea abies (L.) Karst.] stand with varying thinning regimes: A case study

Abstract

An integrated simulation tool, formed by integrating the InnoSIM sawing simulation system with the RetroSTEM simulator, was used to convert available wood raw materials from final felling into sawn timber, allowing for calculation of the three-dimensional wood properties of individual stems (stem geometry, heartwood formation, knottiness) as well as the volume, quality and value of sawn timber in a Norway spruce stand with different thinning regimes (unthinned, normal and intensively thinned). Based on the input data of sawing patterns, the simulations indicate that there are relatively small differences (<8%) in the volume yield (m³ha^?1) of sawn goods resulting from sawlogs available from final felling with different thinning practices. However, intensive thinning yielded the largest stem diameters and the greatest volumes (m³ha^?1) of large-sized centre goods (thickness: 50, 63, 75 mm) of rather poor quality. Normal thinning yielded the largest volume of A-grade side boards and centre goods (m³ha^?1), as well as the best total value ([euro]ha^?1) of sawn timber. Differences observed in sawn timber quality distribution can contribute to even more significant variation in value yields, if pricing mechanisms of timber products change to favour higher grade timber products.     

THE WATTLE BARK INDUSTRY

The growing stock in the artificially established pine plantations in the Republic, the different silvicultural systems under which they have developed and the bearing this could have on the quality of the timber are described briefly.

The timber characteristics responsible for the undesirable behaviour of sawn constructional timber on seasoning are discussed and the silvicultural and management systems which could be applied to improve the timber quality are briefly indicated. The role which tree-breeding could play in improving the quality and profitability of future tree crops is sketched.     

Predivinsk Lespromkhoz: A Case Study on the Collaborative Restructuring of a Forest Product Based Community in Siberia

Abstract

Ecologists, managers, federal forest officials, biologists, Russian and international environmentalists are developing and rethinking the practices and products of a timber operation in central Siberia. Predivinsk Lespromkhoz is a timber producing community located on the Einisei River, 150 kilometers north of Krasnoyarsk in central Siberia. The four thousand inhabitants are faced with expanding costs, a loss of financial support from the government, a collapsed market and disappearing natural resources. The restructuring of the Russian Government gave local foresters and limber operations more control of their resources but unfortunately, inflation and the dwindling economy restricted capital for implementation of new, sustainable forest practices and improved marketable products. Predivinsk is relatively accessible to foreigners interested in the taiga of central Siberia and scientists from the Krasnoyarsk Forest Institute welcome collaborative projects.     

Deer Browsing and Impact on Forest Development

Abstract

Browsing by large herbivores can cause serious costs in forest production. The most important costs related to browsing damage are insufficient stand regeneration, volume losses and timber quality impairment. In Sweden, moose (Alces alces)and roe deer (Capreolus capreolus) are the most abundant deer species and therefore cause the majority of browsing damage. Balancing costs and benefits related to deer density is difficult since few data about the final losses in timber volume or quality impairment is available. Simulations of browsing and the impact on stand growth suggest that a minor or moderate browsing intensity has little effect on final harvest volume. The reason is that trees seem to recover some of the lost growth as they grow out of reach of the animals. Balancing between different uses of the forestry resource is complicated by our limited capability to predict the impact of different management regimes.     

THE MANUFACTURE OF RAYON PULP IN SOUTH AFRICA

The utilization of plantation soils for the growing of pine pulpwood is discussed.

Different tree species make different demands on soil fertility and all tree species grown in S. Africa for commercial purposes also show a fairly wide range ofadaptability to soil fertility and site quality.

Generally plantation soils in this country have reasonable soil depth, good drainage and fair moisture supply but soil fertility levels in higher rainfall areas are often low.

Fertilization in the nursery, at planting time and at an age of 7–10 years of the stand could increase pulpwood yields by about 50 per cent.

Fertilization, cultivation thinning and other silvicultural work which promotes tree growth, all seem to have a similar influence on timber quality. Generally improved rate of growth results in higher timber yields both in total volume and total cellulose yield.

Land available for forestry purposes is limited in this country and it is of great economic and even strategic importance that this land be fully exploited.     

Timber Improvement: II. The Effect of Vigour on Young-Growth Sitka Spruce

A study of the effect of vigour on the within-ring componentsof young, plantation-grown Sitka spruce (Picea sitchensis (Bong.)Carr.) has been made as a contribution to a more effective selectionof timber having superior timber yields and to appraise thelikely effect of forest management practices which, by influencingvigour of growth, affect wood quality. It was found that as ring width in Sitka spruce increases:

1. Thereis an increase in early wood width without a correspondingincreasein late wood and so a greater proportion of early wood.
2. Thereis a reduction in the average density of the early woodcomponentof the rings.
3. Because of the combined effects of 1 and 2,there is a reductionin wood density as vigour of growth increases.
4. There is a lower minimum early wood density.

The significance of these observations on the growth and technicalperformance of Sitka spruce timber is considered. The possibility of appraising adult wood characteristics onthe basis of juvenile wood performance is examined and the scopefor assessing fibre length and density of adult wood from anexamination of wood laid down at about six years from the pithis demonstrated.     

Timber management with variable retention in Nothofagus pumilio forests of Southern Patagonia

Forestry practices integrating ecological and social criteria have been replacing those based only on economic values. Traditional silviculture, such as shelterwood cuts (SC), transforms uneven-aged original stands to an even-aged managed forest. Recently, other methods have proposed to conserve some of the original heterogeneity of the old-growth forests. One proposal leaves 30% of the timber quality forest area as aggregated retention and 20% basal area as dispersed retention. The aim of this study was to analyze the feasibility of timber management with aggregated and dispersed retention in Nothofagus pumilio old-growth forests by analyzing timber and harvesting yield potential compared with traditional regeneration systems. Also, remnant tree stability of aggregated retention was analyzed.     

Log Characteristics and Sawn Timber Recovery of Home-Garden Teak from Wet and Dry Localities of Kerala, India

There is a widely held view among smallholders that teak timber produced from small-scale agroforestry systems, especially home-garden forestry, fetches a lower price than that from conventional plantation forestry. To examine the veracity of this view, the wood quality attributes of teak from two home gardens in the district of Ernakulam (wet site) and Palakkad (dry site) in India were compared to those of forest plantation in Nilambur. The logs were graded using standard timber trade practices into high, medium and low quality as determined by the potential sawn timber grade-yield recovery pattern. Of 96 home garden teak logs (aged 35 years) from wet and dry sites, 59% belonged to timber Grade II–IV and the rest were classified as poles. Grade I logs (export quality) with a girth above 150 cm were not available from either of the homesteads. Faster-grown teak in the wet site produced large diameter logs (dbh 1.37 m) with average diameter of 39.6 cm, which is comparable to that of best site quality in India. In contrast, the average dbh for teak grown in the dry site was 24 cm as compared to the average dbh of 31 cm recorded from the same aged forest plantation in Nilambur. It was found that only 10% of logs belonged to Grade II timber and the rest fell under grades III and IV with more frequent visual defects. The sawn timber recovery percentage was lower for the dry site (66.8%), whereas there was no significant difference in grade from the wet and forest plantation sites, with recovery rates of 76.5% and 78.8%, respectively. The general notion that home garden teak has a large proportion of sapwood seems to be baseless, no significant difference being found between the heartwood-sapwood ratio of home-garden and forest plantation teak. Lack of appropriate silvicultural practices in home-garden forestry caused the production of more defective logs, adversely affecting the market price of timber.

Eucalyptus benthamii Maiden et Cambage growth and wood density in integrated crop-livestock systems

Integrating trees in agricultural landscapes is a promising option to sustainably provide goods for society while increasing biodiversity, securing animal welfare, and generating profits for stakeholders. The choice of the species and knowing how timber quality is affected when trees are integrated to crop and/or livestock enterprises can provide additional insights into the usefulness of timber after harvest, and wood density is one of the most important properties in this regard. The present study aimed to evaluate how Eucalyptus benthamii growth and wood density are affected in integrated crop-livestock systems when compared to monoculture forestry 74 months after planting in subtropical environments. The integrated systems were in an alley cropping design where crop and/or grazed pasture were temporally rotated in between tree lines (14?×?2 m trees spacing), and those systems were compared to monoculture forestry (3?×?2 m spacing). Tree trunks (n?=?60) were sampled in five diameter classes of each treatment by cutting disks in six positions of the trunk (0.1 m, 1.30 m, 25%, 50%, 75% and 90% of the total height) (n?=?360). Trees growing in integrated systems increased trunk diameter at breast height by 24.7%, increased wood fiber production per tree by 17.9%, and produced wood 9.0% less dense than in the monoculture forestry system. Monoculture forestry increased tree height, and there was no difference of trunk volume among the production systems. The results suggest that integrated systems can produce timber with lower wood density, but faster individual tree growth than in forestry monocultures. Such a system can promote sustainable intensification of agricultural production, and enhance provision of complementary ecosystem services.

     

A PHENOTYPIC ASSESSMENT OF PINUS TAEDA PROGENIES IN THE EASTERN TRANSVAAL / 'N FENOTIPIESE BEPALING VAN PINUS TAEDA-NAGESLAG IN OOS-TRANSVAAL

Two P. taeda progeny trials, one polycross and one containing specific crosses, were assessed at Tweefontein State Forest. Most of the families were represented in both trials, which were laid out as completely random designs. Stem form and volume production were taken into account. Although definite shortcomings exist in the lay-out of the trials, certain conclusions can be drawn about the suitability of the clones for further breeding.

Expressed as “selection index-values” families are ranked in order of performance and previous findings are confirmed to a certain extent. As the demand for softwood in the Republic is expected to triple by the year 2000, volume production of timber of acceptable quality should receive high priority when assessing families in the tree breeding programme.     

A general framework for the quantification and valuation of ecosystem services of tree-based intercropping systems

This study provides the first complete framework for the valuation of ecosystem services of agroforestry and uses a tree-based intercropping (TBI) system in southern Québec, Canada, as a case study. Ten ecosystem services were estimated, all of which were of interest and directly applicable to most agricultural systems worldwide: nutrient mineralization, water quality, soil quality, pollination, biological control, air quality, windbreak, timber provisioning, agriculture provisioning, and climate regulation. A mix of mathematical models for the quantification and economic valuation of various ecosystem services were used. The results revealed a total annual margin of $2,645 ha^?1 y^?1 (averaged over 40 years). The economic value of combined non-market services was $1,634 ha^?1 y^?1, which was higher than the value of marketable products (i.e. timber and agricultural products). An analysis of the present value suggested that agricultural products ranked highest among the ecosystem services taken singularly, followed by water quality, air quality, climate regulation, and soil quality maintenance. Total economic value of all ecosystem services for the rotation period was $54,782 ha^?1, only one third of which was contributed by agricultural products. Although the total value of the ecosystem services provided by TBI was high, farmers only benefited from agricultural and timber products. Thus, government incentives are needed to interest farmers in adopting practices that benefit society as a whole.     

Effects of basic density,annual growth and drying schedule on selected quality factors of dried Siberian larch (Larix sibirica) timber

Abstract

Siberian larch (Larix sibirica Ledeb.) timber is suitable for many uses in the mechanical wood industry. Drying it without any decrease in value, however, is difficult and slow. The purpose of this research was to compare the drying quality of Siberian larch timber dried with three different conventional schedules taking into account the density and annual growth of wood. Five drying tests were performed. The final moisture content (MC), MC gradient, cracks, deformations (bow, crook, twist and cup) and case hardening were measured from the dried timber. The basic density particularly affected the MC, as shown in the differences regarding dried wood, with the denser wood having higher final MC and MC gradient. It was also found that large annual growth increased some deformations. Most of the measured factors were best after drying at the highest temperatures used; however, a slightly different trend was observed for bow, twist and cup. MC factors and twisting were the most problematic properties in drying according to this study. Sorting Siberian larch timber, particularly according to density, would improve the MC properties of dried timber by ensuring sufficient drying time, as economically as possible, for each timber piece.     

Schnittholzqualität und Furniereignung von Douglasien aus linksrheinischen Anbaugebieten

Summary Douglas fir sample trees from 9 various stands were cut in sawmills. Every board of the converted timber was graded; all defects in timber were analysed, especially all black and sound knots on the surface of the boards were measured. The percentage of good boards prooved to be comparatively low. From fertile sites the sawn timber quality seems to be inferior compared with wood from poorer and dryer sites. Douglas firs grown single between broadleaved stands showed the lowest timber quality. Throughout the quantity and thickness of black knots were responsible for poor quality. Experiments with production of veneer yielded useful carved veneers when sliced of quartered and clear logs. Branchless logs from 80 years old Douglas firs could be worked up to carved veneers, but are too young for peeled veneers. For full veneer logs diameters of 70 cm and structure of small annual rings is essential. For saw timber as well as for veneerwood production short rotation below 120 years is not suitable. Moreover pruning is necessary.      

Optimal harvesting time in single‐ and multiple‐purpose forest management

In single‐purpose timber producing forestry, the optimal harvesting time occurs when the net revenue on the stumpage value equals the cost of renting the land (the land‐use cost) minus the change in land value.

In multiple‐purpose forestry, the optimal time for harvesting occurs when the sum of the net revenues of the stumpage value and the amenity value is equal to the cost of renting the land minus the change in the land value. This land value is the sum of the land value for timber production and the land value for amenity services in the case of combined management of timber and amenity‐resources.     

Drying of timber in progressive kilns: Simulation,quality, energy consumption and drying cost considerations

Abstract

Progressive (semi-continuous) kilns for softwood drying are very common in Finland and Sweden and are used in some other countries too. A simulation program has been developed that covers all three types of this kiln. The program calculates the climate in the length direction of the kiln and moisture content, moisture profile, wood temperature, slicing test gap and stress development. Energy consumption and drying costs may also be determined. The temperature level is the most important parameter regarding kiln efficiency. Two-zone progressive kilns are found to be more efficient than single-zone kilns. Progressive kilns have lower energy consumption and drying costs than batch kilns. Experimental full-scale tests show that the timber quality from a progressive kiln is comparable to, or in some cases even better than, timber dried in batch kilns.     

Effects of rotation length on the grade recovery and wood properties of Sitka spruce structural timber grown in Great Britain

Context   

Rotation length is known to affect timber quality in many plantation species, but its effect on the properties of Sitka spruce (Picea sitchensis) structural timber has not been quantified.     

Grading and mechanical characterization of small-diameter round chestnut (Castanea sativa Mill.) timber from thinning operations

ABSTRACT

In forestry, thinning operations result in the extraction of young trees with small dimensions. The evaluation of the potential end use of these small-diameter logs (currently mainly used as poles or fence posts) for added-value products such as structural timber is of considerable economic and industrial interests. In the present work, 216 pieces of small-diameter logs of chestnut timber obtained from thinning operations were evaluated in order to determine their mechanical properties and assess various visual or non-destructive grading systems. The two visual standards evaluated (EN 1927 and DIN 4074) were ineffective in grading according to mechanical properties. On the other hand, a grading system based on a non-destructive measurement (acoustic wave velocity) resulted in better classification by structural quality. The characteristic values of the small-diameter round chestnut timber, determined according to the standards EN 384 and EN 338, achieved similar values as standard rectangular sawn timber with respect to modulus of elasticity and density, and higher values for bending strength.     

Withdrawal capacity of washers in bolted timber connections

Abstract

The European yield model (EYM) has been accepted to determine the load-carrying capacity of structural timber connections. However, experiments of bolted connections are still not in agreement with the EYM unless the additional bearing capacity offered by the washers is taken into account. This bearing capacity is depending on the compressive strength perpendicular to grain of the structural timber. Tests results carried out with M16 and M24 washers on solid and glued laminated timber are used to verify the reliability of three strength capacity predicting models, one of which is an analytical model while the other two are empirical. It was concluded that the analytical model is the superior one. This model should be incorporated in all new structural timber design code revisions.     

Multivariate product adapted grading of Scots pine sawn timber for an industrial customer,part 1: Method development

ABSTRACT

Rule-based automatic grading (RBAG) of sawn timber is a common type of sorting system used in sawmills, which is intricate to customise for specific customers. This study further develops an automatic grading method to grade sawn timber according to a customer's resulting product quality. A sawmill's automatic sorting system used cameras to scan the 308 planks included in the study. Each plank was split at a planing mill into three boards, each planed, milled, and manually graded as desirable or not. The plank grade was correlated by multivariate partial least squares regression to aggregated variables, created from the sorting system's measurements at the sawmill. Grading models were trained and tested independently using 5-fold cross-validation to evaluate the grading accuracy of the holistic-subjective automatic grading (HSAG), and compared with a re-substitution test. Results showed that using the HSAG method at the sawmill graded on average 74% of planks correctly, while 83% of desirable planks were correctly identified. Results implied that a sawmill sorting station could grade planks according to a customer's product quality grade with similar accuracy to HSAG conforming with manual grading of standardised sorting classes, even when the customer is processing the planks further.