Polymer gate dielectric surface viscoelasticity modulates pentacene transistor performance

Nanoscopically confined polymer films are known to exhibit substantially depressed glass transition temperatures (Lg's) as compared to the corresponding bulk materials. We report here that pentacene thin films grown on polymer gate dielectrics at temperatures well below their bulk Tg's exhibit distinctive and abrupt morphological and microstructural transitions and thin-film transistor (TFT) performance discontinuities at well-defined growth temperatures. The changes reflect the higher chain mobility of the dielectric in its rubbery state and are independent of dielectric film thickness. Optimization of organic TFT performance must recognize this fundamental buried interface viscoelasticity effect, which is detectable in the current-voltage response.     

Controlling the charge state of individual gold adatoms

The nature and control of individual metal atoms on insulators are of great importance in emerging atomic-scale technologies. Individual gold atoms on an ultrathin insulating sodium chloride film supported by a copper surface exhibit two different charge states, which are stabilized by the large ionic polarizability of the film. The charge state and associated physical and chemical properties such as diffusion can be controlled by adding or removing a single electron to or from the adatom with a scanning tunneling microscope tip. The simple physical mechanism behind the charge bistability in this case suggests that this is a common phenomenon for adsorbates on polar insulating films.     

Two-dimensional magnetic particles

Single two-dimensional (2D) atomically thick magnetic particles of cobalt and iron with variable size and shape were fabricated by combining a mask technique with standard molecular beam epitaxy. Reduction of the lateral size of in-plane magnetized 2D cobalt films down to about 100 nanometers did not essentially modify their magnetic properties; although the separation of boundaries decreased greatly, neither domain penetrated the particle, nor was any sizable shape anisotropy observed. The mutual interaction of 2D cobalt particles was negligible, and the magnetic state of a single particle could be switched without modifying the state of the neighbors. Perpendicularly magnetized iron particles did not exhibit such responses. These results suggest that only a few atoms forming a 2D in-plane magnetized dot may provide a stable elementary bit for nanorecording.     

Tuning the quantum stability and superconductivity of ultrathin metal alloys

Quantum confinement of itinerant electrons in atomically smooth ultrathin lead films produces strong oscillations in the thickness-dependent film energy. By adding extra electrons via bismuth alloying, we showed that both the structural stability and the superconducting properties of such films can be tuned. The phase boundary (upper critical field) between the superconducting vortex state and the normal state indicates an anomalous suppression of superconducting order just below the critical temperature, Tc. This suppression varies systematically with the film thickness and the bismuth content and can be parametrized in terms of a characteristic temperature, Tc* (less than Tc), that is inversely proportional to the scattering mean free path. The results indicate that the isotropic nature of the superconductive pairing in bulk lead-bismuth alloys is altered in the quantum regime.     

Multiple-step melting in two-dimensional hexatic liquid-crystal films

An unexpected three-stage melting transition has been observed in two-dimensional (2D) free-standing liquid-crystal films by in situ electron-diffraction and optical-reflectivity measurements. These data suggest the existence of two phases between the 2D solid and liquid: a hexatic phase and, at a higher temperature, an intermediate liquid phase with hexatic-like positional correlations ( approximately 40 angstroms) but no long-range orientational order. Previous high-resolution heat-capacity measurements have revealed a divergent-like anomaly at the hexatic-liquid transition that sharply contradicts the predictions of 2D melting theories. The observation of an intermediate isotropic phase may alter our understanding of 2D melting and lead to reconciliation between current experiments and theories.     

Oriented 2D covalent organic framework thin films on single-layer graphene

Covalent organic frameworks (COFs), in which molecular building blocks form robust microporous networks, are usually synthesized as insoluble and unprocessable powders. We have grown two-dimensional (2D) COF films on single-layer graphene (SLG) under operationally simple solvothermal conditions. The layered films stack normal to the SLG surface and show improved crystallinity compared with COF powders. We used SLG surfaces supported on copper, silicon carbide, and transparent fused silica (SiO(2)) substrates, enabling optical spectroscopy of COFs in transmission mode. Three chemically distinct COF films grown on SLG exhibit similar vertical alignment and long-range order, and two of these are of interest for organic electronic devices for which thin-film formation is a prerequisite for characterizing their optoelectronic properties.     

Epitaxial BiFeO3 multiferroic thin film heterostructures

Enhancement of polarization and related properties in heteroepitaxially constrained thin films of the ferroelectromagnet, BiFeO3, is reported. Structure analysis indicates that the crystal structure of film is monoclinic in contrast to bulk, which is rhombohedral. The films display a room-temperature spontaneous polarization (50 to 60 microcoulombs per square centimeter) almost an order of magnitude higher than that of the bulk (6.1 microcoulombs per square centimeter). The observed enhancement is corroborated by first-principles calculations and found to originate from a high sensitivity of the polarization to small changes in lattice parameters. The films also exhibit enhanced thickness-dependent magnetism compared with the bulk. These enhanced and combined functional responses in thin film form present an opportunity to create and implement thin film devices that actively couple the magnetic and ferroelectric order parameters.     

Electric field effect in atomically thin carbon films

We describe monocrystalline graphitic films, which are a few atoms thick but are nonetheless stable under ambient conditions, metallic, and of remarkably high quality. The films are found to be a two-dimensional semimetal with a tiny overlap between valence and conductance bands, and they exhibit a strong ambipolar electric field effect such that electrons and holes in concentrations up to 10(13) per square centimeter and with room-temperature mobilities of approximately 10,000 square centimeters per volt-second can be induced by applying gate voltage.     

Superconducting pair correlations in an amorphous insulating nanohoneycomb film

The Cooper pairing mechanism that binds single electrons to form pairs in metals allows electrons to circumvent the exclusion principle and condense into a single superconducting or zero-resistance state. We present results from an amorphous bismuth film system patterned with a nanohoneycomb array of holes, which undergoes a thickness-tuned insulator-superconductor transition. The insulating films exhibit activated resistances and magnetoresistance oscillations dictated by the superconducting flux quantum h/2e. This 2e period is direct evidence indicating that Cooper pairing is also responsible for electrically insulating behavior.     

高等植物基因克隆的策略

基因克隆是进行植物基因功能研究的先决条件。随着拟南芥、水稻、杨树等植物全基因组序列的公布,标志着基因组进入后基因组研究时代是分子生物学发展的必然趋势,同时为进一步克隆植物中控制重要性状的主效基因提供强大的基因组数据支撑。目前有较多的基因克隆传统及衍生技术,文章综述了图位克隆、同源克隆、转座子标记法、表达序列标签法、差异表达基因克隆等5种应用比较广泛的基因克隆技术,并就其发展方向和策略作了展望。     

Dislocations and Flux Pinning in YBa2Cu3O7-delta

Bulk YBa(2)Cu(3)O(7-delta) superconductors, under certain processing conditions such as melt texturing, exhibit a very high dislocation density of 10(9) to 10(10) per square centimeter. In addition, the density of low-angle grain boundaries in such samples can be significantly increased (to less than 700-nanometer spacing) through a dispersion of submicrometer-sized Y(2)BaCuO(5) inclusions. These defect densities are comparable to those in high critical current thin films as revealed through scanning tunneling microscopy, and yet the critical current densities in the bulk materials (at 77 kelvin and a field of 1 tesla for example) remain at a 10(4) amperes per square centimeter level, about two orders of magnitude lower than in thin films. The results imply that these defect density levels are not significant enough to explain the difference in flux pinning strength between the thin film and bulk materials. The observation of spiral-like growth of the superconductor phase in bulk Y-Ba-Cu-O is also reported.     

Mercury-Based Cuprate High-Transition Temperature Grain-Boundary Junctions and SQUIDs Operating Above 110 Kelvin

The superconducting transport characteristics of HgBa(2) CaCu(2)O(6+delta) (Hg-1212) films and grain-boundary junctions grown on (100)-oriented SrTiO(3) bicrystal substrates have been investigated. The films exhibit a zero-resistance temperature of approximately 120 kelvin and sustain large critical current densities, with values as high as 10(6) amperes per square centimeter at around 100 kelvin. On the other hand, the grain boundaries behave as weak links, with substantially lower critical currents, as is observed for other cuprate superconductors. A reduction of three orders of magnitude in critical current was observed for transport across a 36.8 degrees grain boundary. The current-voltage characteristics of bridges across such a grain boundary show weak-link behavior qualitatively resembling that of a resistively shunted junction. Single-level direct-current superconducting quantum interference devices (SQUIDs) have been fabricated with such bicrystal junctions. These SQUIDs show clear periodic voltage modulations when subjected to applied magnetic fields. The SQUIDs operate at temperatures as high as 111.8 kelvin, which makes them attractive for operation in portable sensors and devices that utilize nonconventional cooling methods.     

Origin of stick-slip motion in boundary lubrication

Molecular dynamics simulations of atomically thin, fluid films confined between two solid plates are described. For a broad range of parameters, a generic stick-slip motion is observed, consistent with the results of recent boundary lubrication experiments. Static plates induce crystalline order in the film. Stick-slip motion involves periodic shear-melting transitions and recrystllization of the film. Uniform motion occurs at high velocities where the film no longer has time to order. These results indicate that the origin of stick-slip motion is thermodynamic instability of the sliding state, rather than a dynamic instability as usually assumed.     

Super-compressible foamlike carbon nanotube films

We report that freestanding films of vertically aligned carbon nanotubes exhibit super-compressible foamlike behavior. Under compression, the nanotubes collectively form zigzag buckles that can fully unfold to their original length upon load release. Compared with conventional low-density flexible foams, the nanotube films show much higher compressive strength, recovery rate, and sag factor, and the open-cell nature of the nanotube arrays gives excellent breathability. The nanotube films present a class of open-cell foam structures, consisting of well-arranged one-dimensional units (nanotube struts). The lightweight, highly resilient nanotube films may be useful as compliant and energy-absorbing coatings.     

Thousandfold change in resistivity in magnetoresistive la-ca-mn-o films

A negative isotropic magnetoresistance effect more than three orders of magnitude larger than the typical giant magnetoresistance of some superlattice films has been observed in thin oxide films of perovskite-like La(0.67)Ca(0.33)MnOx. Epitaxial films that are grown on LaAIO(3) substrates by laser ablation and suitably heat treated exhibit magnetoresistance values as high as 127,000 percent near 77 kelvin and approximately 1300 percent near room temperature. Such a phenomenon could be useful for various magnetic and electric device applications if the observed effects of material processing are optimized. Possible mechanisms for the observed effect are discussed.     

Giant birefringent optics in multilayer polymer mirrors

Multilayer mirrors that maintain or increase their reflectivity with increasing incidence angle can be constructed using polymers that exhibit large birefringence in their indices of refraction. The most important feature of these multilayer interference stacks is the index difference in the thickness direction (z axis) relative to the in-plane directions of the film. This z-axis refractive index difference provides a variable that determines the existence and value of the Brewster's angle at layer interfaces, and it controls both the interfacial Fresnel reflection coefficient and the phase relations that determine the optics of multilayer stacks. These films can yield optical results that are difficult or impossible to achieve with conventional multilayer optical designs. The materials and processes necessary to fabricate such films are amenable to large-scale manufacturing.     

Guest transport in a nonporous organic solid via dynamic van der Waals cooperativity

A well-known organic host compound undergoes single-crystal-to-single-crystal phase transitions upon guest uptake and release. Despite a lack of porosity of the material, guest transport through the solid occurs readily until a thermodynamically stable structure is achieved. In order to actively facilitate this dynamic process, the host molecules undergo significant positional and/or orientational rearrangement. This transformation of the host lattice is triggered by weak van der Waals interactions between the molecular components. In order for the material to maintain its macroscopic integrity, extensive cooperativity must exist between the molecules throughout the crystal, such that rearrangement can occur in a well-orchestrated fashion. We demonstrate here that even weak dispersive forces can exert a profound influence over solid-state dynamics.     

Transparent, conductive carbon nanotube films

We describe a simple process for the fabrication of ultrathin, transparent, optically homogeneous, electrically conducting films of pure single-walled carbon nanotubes and the transfer of those films to various substrates. For equivalent sheet resistance, the films exhibit optical transmittance comparable to that of commercial indium tin oxide in the visible spectrum, but far superior transmittance in the technologically relevant 2- to 5-micrometer infrared spectral band. These characteristics indicate broad applicability of the films for electrical coupling in photonic devices. In an example application, the films are used to construct an electric field-activated optical modulator, which constitutes an optical analog to the nanotube-based field effect transistor.     

软X射线摄影在林木种子检验中应用研究

通过应用软Ｘ射线仪对红木荷等１３个树种种子进行衬比摄影和直接摄影研究，找出各树种种子不同焦片距（３００ｍｍ和２００ｍｍ）和不同感光材料（Ｘ光胶片、普通胶片、相纸）的最适电压、电流和曝光时间，找出最适衬比剂、衬比浓度和衬比时间．