Nondestructive testing method of wood moisture content based on a planar capacitance sensor model

For our research, a new hybrid experimental-computational method is presented. We applied a least squares fitting     

A microwave applicator for on line wood drying: Temperature and moisture distribution in wood

Summary An especially designed open microwave applicator was analysed using wood as the material to be heated and dried. The idea was to develop an on line microwave construction consisting of several small open applicators, each fed by a small standard magnetron (for example 1.4 kW main power). The process was analysed by measuring the wood temperature during heating using an IR-camera and detecting the moisture distribution during drying by CT-scanning. Pine and birch wood samples were used in the experiments, mainly 40 mm in thickness. The experiments show that the power distribution differs between dry wood and moist wood. The analysis of the temperature fields captured by the IR-camera during the first minutes allows a rather accurate determination of the MW power. Consequently, the drying proceeds unevenly in the wood specimens, especially in the longitudinal direction. The dimensions of the applicator and its relation to the wood dimension are very important. However, the wood was not destroyed, the temperature and moisture gradients did not affect the wood in terms of checks or deformations. The drying rate in different positions of the specimen varied between 0.30 and 0.80 percentage moisture content/min. The uneven energy, meaning temperature and field distribution, is to be compensated in the future by a moving wood load and by alternating the position of each applicator in a larger scale microwave pilot plant. Received 25 February 1997     

Effect of moisture and mechanical loading on wooden materials

Summary In a previous paper (Mårtensson 1988 a), results of tests performed on hardboard in tension under cyclic humidity were presented and comparison with a suggested constitutive model was made. This paper presents the result of further work that has been carried out concerning modelling of the behaviour of tempered hardboard subjected to moisture loading combined with mechanical loading. Tests were made both in compression and bending. The tests in compression were of two types, conventional creep tests during moisture cycling and quasi-relaxation tests during moisture cycling. The model was quantified on the basis of the previous tension tests and the compression tests, in both cases creep tests, and was then checked independently against the other types of test.Interaction between moisture change and mechanical loading was found to be significant during the first moisture cycle but much smaller during subsequent cycles. Experimental and numerical analysis of composite structural elements was also performed, showing that internal stresses of significant magnitude are developed as a result of variations in moisture. Such stresses can be predicted with reasonable accuracy using the proposed model. This can be of great value in design and development of wood products and wooden structural elements.     

可视化木家具生产车间全程监控系统的构建

在分析我国木家具制造车间的监控和管理现状的基础上,提出了基于可视化木家具生产车间监控系统的基本架构——多点信息采集系统、数据处理和调度系统、企业监控管理中心系统和现场信息反馈系统及相关的辅助设施,探讨了基本架构的功能特点,并从基本流程、信息采集、信息处理与调度、信息反馈等方面详细介绍了基于可视化木家具生产车间全程监控系统的监控过程与方法.在此基础上,总结了可视化监控系统在家具生产过程中的应用特点.该系统可为木家具生产机加工车间提供一个具有快速反应、有弹性、精细化特点的制造环境.     

New monitoring concept of moisture content distribution in wood during RF/vacuum drying

A new method for monitoring moisture content during radio-frequency (RF)/vacuum drying was developed by measurement of temperature and pressure in wood. Temperature and pressure inside the wood were measured simultaneously during RF/vacuum drying at the same point. The relative humidity (RH) and moisture content (MC) below the fiber saturation point (FSP) were calculated based on temperature and pressure, and the relationship between the temperature, RH, and equilibrium moisture content (EMC) at the measurement point. When the moisture content was below the FSP, the calculated MC was slightly greater than the value given by oven drying. The absolute error was within 0.8% near the open cross side, and was within 1.8% at another measurement point. Thus, we concluded that it was practicable to monitor the moisture content below the FSP according to the temperature and pressure inside the wood. Part of this study was presented at the 15th Annual Meeting of the Chugoku Shikoku Branch of the Japan Wood Research Society, Higashi-Hiroshima, Japan, September 2003     

Studies on pre-treatment by compression for wood drying III: the reduction of moisture content,the recovery rate,and mechanical properties of wood compressed at different moisture content conditions

As a follow-up report, the pre-treatment by compression for wood drying was systematically studied in terms of the reduction of moisture content (MC), the recovery rate (RR), and mechanical properties of wood compressed at different MC conditions. The results showed that MC after compression on water-saturated wood determined the critical value of MC before compression which were about 84 and 105% at a compression ratio of 60 and 40% for Poplar and Chinese fir, respectively. Beyond the critical value, MC after compression remained constantly at about 84% and decreased slightly from 105% for Poplar and Chinese fir, respectively. The MC reduction decreased with the decrease of MC before compression. The MC reduction was rather effective when the MC before compression was higher than the critical value and was recommended to pre-treat for the effectiveness of MC reduction. In addition, after the recovery, the wood volume and mechanical properties were well retained for the wood compressed at all MC conditions which were above fiber saturation point (FSP) before and after compression. Therefore, the pre-treatment by compression is viable in terms of the RR and mechanical properties at rather broad MC conditions above FSP. Moreover, the compression force needed for treatment was almost same at these MC conditions.     

手提剥皮机主要性能对使用效果影响的研究

本文通过理论分析和试验研究,探讨影响手提剥皮机使用效果的主要因素,以便为确定适用机型提供科学依据。     

A remark on the formulation of the governing equation for the transport of moisture in wood

Summary It is shown that by treating the mass flux entering the equation of conservation of mass as a constitutive equation, the drying equation may be modified. The transport of moisture may be dependent on deformation, the dependence being enhanced by material anisotropy.     

A new method for nondestructive evaluation of solid wood moisture content based on dual-energy X-ray absorptiometry

This paper presents a new method to determine the moisture content of solid wood based on the principle of dual-energy X-ray absorptiometry. The study investigates the theoretical relationship between X-ray wavelength and mass attenuation coefficients of wood, water, and reference substance. In accordance with this relationship, a theoretically obtained equation is proposed to calculate the moisture content in wood. The proposed equation is compared to experimental results using small blocks of sugi wood, which showed that the change in mass attenuation coefficient of wood with X-ray tube voltage increased with increasing moisture content as expected from the theoretical equation. A regression equation for moisture content estimation was determined based on the experimental results, and the standard error of estimate in the 0–120 % dry-basis moisture content range using the regression equation was determined to be 21.9 % with the most appropriate pair of tube voltages, 15 and 40 kVp. The accuracy of the method will be improved by reducing the duration of X-ray radiography and by increasing the disparity between paired tube voltages. This method has the potential to determine moisture content of solid wood using X-ray without oven-drying or assuming oven-dry density.     

Test of an equation for nonisothermal moisture transport in wood

Summary Reported moisture and temperature distributions in wood exposed to a temperature gradient under conditions of zero flow were used to compute changes in moisture content per change in Kelvin temperature, dm/dT. Corresponding theoretical values were calculated from a model based on nonequilibrium thermodynamics. Comparison of the measured and theoretical values supports the notion that moisture transport in wood can be modeled successfully with thermodynamic methods.     

A review on wood machining: characterization,optimization, and monitoring of the sawing process

ABSTRACT

Sawing is the most common machining process and is present in both primary and secondary wood transformation sectors. The objective of this paper is to review how it is affected by different factors. The current challenges associated with various machining factors, process monitoring, and sensor selection were identified and explained. Consequently, four research challenges and technological gaps were outlined. (1) Contradictory results have been reported due to different cutting processes, wood species, measurement methods, and cutting speed range studied in literature, so special consideration needs to be taken when comparing results with those available in the literature. (2) Laboratory test conditions cannot yet fully represent the extreme cutting conditions in sawmills. More emphasis should be placed on those harsh industrial cutting conditions. (3) Research on wood cutting lacks multi-objective optimization approach, which suggests that sawdust generation should be simultaneously analysed with surface quality and power consumption. (4) Compared with metal cutting, little research has been conducted on wood sawing monitoring using an artificial intelligence approach, which should be prioritized in designing adaptive control systems. Combining intelligent monitoring and multi-objective optimization approaches should pave the way for controlling the sawing process so higher surface quality and cost efficient machining is achieved.     

Effect of moisture content on fatigue behavior in the non-linear region for wood

Summary For oven-dried wood applied non-linear deflection, the temperature rising AT was constant after the initially slight temperature rising, and then arose immediately before fatigue failure. Moreover, there was not the rapid reduction of dynamic stress as observed for moist wood. On the other hand, the process to fatigue failure for various moist wood depended upon the moisture content. For heating vs. moisture content, the heating increased with moisture content up to 13 to 20%, while it decreased gradually above 20%. The processes to fatigue failure at more than 13% moisture content were similar to one another. These results were explained on energy balance between the heating due to flexibility of moist molecules in wood substances and the energy consumption for moisture movement and vaporization. The present results supported the mechanism of fatigue behavior in the non-linear region which was proposed in the previous report.     

Influence of moisture content on the vibrational properties of hematoxylin-impregnated wood

The vibrational property of hematoxylinimpregnated wood was investigated from the aspect of moisture content dependence. The specific dynamic Young's modulus (E/) and loss tangent (tan) of hematoxylin-impregnated wood were determined in the relative humidity (RH) range of 0%–97%, and were compared with those of the untreated and some conventional chemically treated woods. The changes in theE/ and tan of wood with increasing RH were suppressed by acetylation and formaldehyde treatment because of a marked reduction in the hygroscopicity of the wood. Although the hematoxylin impregnation did not significantly affect the hygroscopicity of the wood, its influence onE/ and tan were similar to that of formaldehyde treatment at low RH and of acetylation at medium RH. It was supposed that at low to medium RH hematoxylin restrains the molecular motion of amorphous substances in the cell wall because of its bulkiness and rigidity. On the other hand, at high RH it seems to work as a plasticizer with adsorbed water molecules.     

Effect of moisture content on the ultrasonic acoustic properties of wood

We determined the ultrasonic velocity and en-ergy attenuation value of three tree species (basswood, elm, and fir) 1 per tree in different moisture content levels, using RSM-SY5 ultrasonic testing inst...     

建筑材用防腐剂配方及其化学性能的试验

我国CCA系列配方与英国CCA(Tanalith C,Celcure K33)的对比试验表明:我国CCA_3、CCA_6配方抗流失和对金属腐蚀效果接近英国产品;砷含量范围低于美国CCA—C型;国产原料配制的CCA_(S)抗流失和对金属腐蚀性较好。浸渍处理试验显示,CCA类防腐剂宜采用加压法。PPA油性防腐剂中的五氯酚溶解度、抗“霜”、油漆性能良好;CCB宜于处理门窗及室内木结构。表层化学浸渍处理可使硼在木材中的保留率提高到60—70%。     

Research on the effect of microwave pretreatment on moisture diffusion coefficient of wood

Based on the pathway of moisture diffusion in wood below FSP, an improved moisture diffusion model has been proposed. The theoretical solution of the mathematic model shows that the diffusion coefficient for microwave pretreated wood was increased no more than 3% compared with that of wood without being treated even under extreme condition. Experiments indicate that the pit membrane structure can be effectively destroyed during microwave pretreatment, but the moisture diffusion coefficient can not be significantly improved. In practice, the effect of microwave pretreatment on moisture diffusion coefficient can be ignored. The drying rate of wood during the sequent conventional drying can not be significantly improved by microwave pretreatment.