In situ loading TiO<Subscript>2</Subscript> and its photocatalysis and UV resistance on cotton fabric

Anatase TiO₂ nanoparticles was in-situ formed on the cotton fabric by using tetrabutyl titanate (TBT) as a precursor through the normal pressure hydrothermal method. X-ray diffraction (XRD), Scanning electron microscopy (SEM), UV visible spectra (UV-VIS), ATR-IR were used as the characterization techniques. Photocatalytic performance of TiO₂ on the fabric surface was evaluated by methylene blue (MB), 4 kinds of the common living stains and three dyes under ultraviolet and visible light radiation. XRD analysis found that the TiO₂ loaded on the fabric was mainly anatase crystalline phase with particle size of 6.4 nm. SEM observed that a large number of nano TiO₂ particles are distributed on the fabric surface. UV-VIS test indicated that theTiO₂-coated fabric possessed an obvious absorption for ultraviolet. ATR-IR analysis indicated that the nano-TiO₂ possesses a strong affinity with the hydroxyl group of the cotton fabric, and the soaping tests showed that the TiO₂ was firmly bonded with the fabrics. The treated fabrics have good degradation ability for MB aqueous solution, and could degrade azo, anthraquinone and phthalocyanine dyes. The order of degradation of the common life stains was: pepper oil> tea > coffee > soy sauce.     

Adhesion and durability of Cu film on polyester fabric prepared by finishing treatment with polyester-polyurethane and aqueous acrylate

To improve adhesion and wear durability at the interface between copper (Cu) film and polyester fabric, the Cu-coated polyester fabric was treated by two commercial solutions of polyester-polyurethane (PP) and aqueous acrylate (AC) as finishing process respectively. Both finishing agents with 5 %, 10 %, 15 %, 20 %, 25 %, 30 %, 35 % and 40 % concentrations were coated on the Cu-coated fabrics by a padding method in this study. The surface morphologies of the coated polyester fabric before and after finishing were characterized by scanning electron microscopy (SEM). The adhesion of Cu-coated film before and after the finishing treatments was measured with scotch tape method; the durability was evaluated by colorfastness to washing, crocking and perspiration. Additionally, Ultraviolet (UV) shielding, water repellency and CIE L*a*b of the Cu-coated polyester fabric before and after the finishing treatments were determined. The Cu-coated polyester fabric has a high adhesion property of the 5 level, colorfastness to washing, wet crocking and perspiration of the Cu-coated fabric were obviously enhanced to level 5, level 4-5 and level 3-4. Meanwhile, The Cu-coated polyester fabric kept an excellent UV protection with UPF value over 68 after finishing treatment with PP and AC. The results demonstrate the finishing treatment with the PP presented effectively in durability performance than the AC for the Cu-coated polyester fabric.     

Effect of nano SrTiO3 supporting nano TiO2 on self-cleaning of cotton fabric

This study reports the results of an investigation aiming at finding what affect nano titania (TiO₂) and nano strontium titanate (SrTiO₃) on self-cleaning of cotton fabrics. The photocatalytic activity of nano strontium titanate has been examined on cotton fabric under UV irradiation in various concentrations in mixing of nano titania. The amount of loaded nano titania and nano strontium titanate particles on cotton fabrics were investigated using X-ray fluorescence spectrometry (XRF) and crystallinity of coatings by X-ray diffraction spectroscopy (XRD). The treated cotton fabrics, which were stained with two common synthesized dyes, were exposed to 400 W UV radiation for 30 hours and their self-cleaning property was investigated by a reflectance spectrophotometer. Scanning electron microscope (SEM) images show pervasion of nano materials on the surface of the treated cotton. Adding nano strontium titanate to nano titania showed the most promising photocatalytic activity toward dye degradation.     

Immobilization of TiO2 nanoparticles on PET fabric modified with silane coupling agent by low temperature hydrothermal method

PET fabric was first modified with silane coupling agent KH-560, and then was loaded with a layer of nano-scaled TiO₂ particles using tetrabutyl titanate as precursor by low temperature hydrothermal method, followed by dyeing with Disperse Blue 56. The morphology, crystalline phase, chemical modification, thermal stability and optical property of PET fiber before and after treatments were studied by scanning electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy, thermal gravimetric and diffuse reflectance spectrum techniques. The properties of tensile, air permeability, luster, ultraviolet (UV) protection, photocatalytic activity, K/S value and color fastness were also measured. It was found that compared with the TiO₂-coated fabric without modification with KH-560, the loading of TiO₂ nanoparticles on the surface of the TiO₂-coated fabric modified with KH-560 was obviously improved. The pure anatase TiO₂ nanoparticle was grafted onto the fiber surface. The onset decomposition temperature increased. The absorbing capability to ultraviolet radiation was enhanced. The properties of tensile, air permeability, luster, K/S value and color fastness changed slightly. The UV protection ability and photodegradation of methyl orange under UV illumination were enhanced to some extent.     

Self-cleaning Properties of Nylon 6 Fabrics Treated with Corona and TiO<Subscript>2</Subscript> Nanoparticles under Both Ultraviolet and Daylight Irradiations

Nylon 6 fabric with self-cleaning properties was prepared by corona discharge pre-treatment and coating with TiO₂ nanoparticles (NPs) using pad-dry-cure technique. The self-cleaning property was studied by discoloration of methylene blue (MB), ketchup, tea and coffee stains from the corona+TiO₂ treated nylon-6 fabric. Color difference (ΔΕ*), reflectance (R) and K/S of MB stain were investigated by diffuse reflectance spectrophotometry. The MB stain was almost completely removed from the corona+TiO₂ treated nylon surface after 24 h under UV light/daylight irradiation. Both of these phenomena (corona and TiO₂) led to an increase in the discoloration of stains under UV and daylight irradiations. The EDS analysis showed an increase in the concentration of deposited TiO₂ NPs coating after corona treatment. The FE-SEM images revealed that the surface of nylon 6 was coarser after the corona treatment. Also, the FE-SEM micrographs exhibited that a uniform layer of TiO₂ NPs was formed on the corona treated nylon fabric. The corona+TiO₂ treated nylon illustrated antibacterial activity against E. coli and B. subtillis microorganisms. The EDS and FE-SEM analysis confirmed that after 5 washing cycles, the amount of TiO₂ NPs was higher on the surface of corona+TiO₂ treated nylon than that of the fabric only treated with TiO₂ without corona pretreatment. This result justifies that the corona+TiO₂ treated nylon fabric with appropriate self-cleaning property can be applied cost-effectively in the textile industry.     

Evaluation of X-ray radiation shielding performance of barium sulphate-coated fabrics

The X-ray in the field of medical imaging is an important diagnostic tool, but it has been identified that there are potential radiation risks associated with the X-ray radiation scans. These risks have traditionally been guarded against using lead based shields. Lead has excellent radiation shielding properties, but it is also heavy and a potential health and environmental hazard due to its toxicity. Thus, there have been studies seeking to find an alternative that is as effective and yet counters the other drawbacks. In this paper, preliminary studies were conducted to assess the shielding effect of barium sulphate (BaSO₄) and bismuth oxide (Bi₂O₃) on the coated fabric samples. X-ray transmission resulting from standard lead coated samples, uncoated fabric, BaSO₄, and BaSO₄/Bi₂O₃ coated fabrics was evaluated via measuring the penetration of primary radiation. Different properties such as mass per unit area, material thickness, and surface morphology were examined. All samples were irradiated by X-ray at 80 kVp to measure the amount of transmissions. The X-ray transmission level associated with BaSO₄ ranged from 84.5 % to 70.5 %. However, this level was elevated to 55.6 % when BaSO₄/Bi₂O₃ mixture was applied on the fabric. The theoretical attenuation coefficient values associated with different coating mixtures comprising different weight proportions of BaSO₄, Bi₂O₃, and PVC were determined between 0 MeV and 105 MeV using XCOM code. The XCOM results implied that the X-ray attenuation coefficient among all prepared coatings should be the mixture comprising 13.3 wt% Bi₂O₃/20 wt% BaSO₄/66.7 wt% PVC, which was in agreement with the experimental results obtained from X-ray transmission measurements.     

Bioactive and multifunctional textile using plant-based madder dye: Characterization of UV protection ability and antibacterial activity

In the present work the natural madder dye (Rubia tinctorum L.) was applied to the simultaneous dyeing and functionalization of polyester (PET) fabric. In the first part of the study the color performance and the durability were revealed for exhaustion dyed fabric. The dyed fabric was then characterized with respect to ultraviolet (UV) protection ability and antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). CIELab color coordinates, namely the positive a* and b* values, confirmed a yellow/orange color of the dyed fabric. From durability tests, the color showed a moderate to good light fastness and good to excellent fastness to washing and rubbing. The madder dye improved both the UV protective performance and the antibacterial activity of the fabric. With 3 % on weight of fiber (owf) the UV protection factor increased up to 106, and the antibacterial activity up to 86 % against both types of bacteria tested.     

Antibacterial,UV protective and ammonia sensing functionalized polyester fabric through <Emphasis Type="Italic">in situ</Emphasis> synthesis of cuprous oxide nanoparticles

In this research, a facile and cost effective method is presented for in-situ synthesis of cuprous oxide nanoparticles on polyester fabric along with surface modification by using one pot wet chemical method at boil. Copper sulfate (CuSO₄), sodium hypophosphite (SHP) and polyvinylpyrrolidone (PVP) were used as precursor, reducing agent and stabilizer, respectively. Further, monoethanolamine (MEA) was used as pH adjustment and also modifier of polyester surface introduced amide and hydroxyl functional groups on the fabric. The images of FESEM, mapping, patterns of EDX, UV-visible absorbance spectrum, FTIR analysis and X-ray diffraction pattern confirmed the successful processing. The treated samples showed excellent antibacterial properties (100 %) toward both Staphylococcus aureus and Escherichia coli pathogen bacteria. Also, the results of cytotoxicity test proved no harmful effects on the human dermal fibroblasts for the treated sample with the lower concentration of the materials having white color with good antibacterial activities. The treated samples also indicated very good UV protection properties as well as improved wettability and mechanical properties. They are also sensitive to ammonia through immediate color change when contacted with ammonia solution. The above mentioned processing method can be used for production of polyester fabric with multifunctional properties for using in the various textile industries.     

Microstructure and properties of Ni-Fe3O4 composite plated polyester fabric

In this study, electroless Ni-Fe₃O₄ composite plating on polyester fabric modified with 3-aminopropyltrimethoxysilane (APTMS) was investigated under ultrasonic irradiation. Effects of deposit weight on microstructure and properties of Ni-Fe₃O₄ composite coating were studied. Surface morphology, chemical composition and state, crystal structure of the electroless Ni-Fe₃O₄ composite plated polyester fabric were characterized by SEM, EDX, XPS and XRD. Magnetic properties, electrical resistivity and electromagnetic interference (EMI) shielding effectiveness (SE) of Ni-Fe₃O₄ plated polyester fabric were also evaluated. The presence of co-deposition of Fe₃O₄ in Ni coating on the polyester fabric is demonstrated by an XPS analysis. At a higher deposit weight, there is an increase in particle size and saturation magnetization, and a decrease in electrical resistivity with respect to the rise of deposit weight, respectively. As the Ni-Fe₃O₄ weight on the treated fabric is 32.90 g/m², the EMI SE of the Ni-Fe₃O₄ plated polyester fabric arrives 15–20 dB at frequencies that range from 8 to 18 GHz. The results indicate the Ni-Fe₃O₄ plated polyester fabrics are used as super-paramagnetic, conductive and EMI shielding materials.     

Synthesis and microbial studies of N-phenyl-2-(4-phenyl-thiazol-2-ylamino)-acetamide based disperse dyes and their dyeing performance on polyester fiber

Azo disperse dyes (D₁-D₁₃) were prepared by various diazotized aryl amines coupled with N-(phenyl)-2-[(4-phenyl-1,3-thiazol-2-yl)amino] acetamide. All the azo disperse dyes have been characterized by their percentage yield, UV-VIS spectroscopy, elemental analysis, IR spectroscopy, ¹H-NMR spectroscopy, and dyeing performance on polyester fiber. These dyes were applied to polyester fabric by HTHP method and their fastness properties were evaluated. All the dyes gave moderate to excellent fastness properties on polyester fiber. The main focus was to synthesize azo disperse dyes that give good dyeing property along with pharmacological activity. Therefore, the synthesized compounds were examined for their antimicrobial activity at various concentrations using well-known Kirby-Bauer disk diffusion method.     

Preparation and property of TiO2/SiO2 multilayer film on the fabric by sol-gel process

The high light reflection of multilayer TiO₂/SiO₂ film was prepared on the fabric by the sol-gel process. The size of titania and silica particles in hydrosol was analyzed by Nanosizer, and the morphology of TiO₂/SiO₂ multilayer film on the fabric was characterized by SEM. The reflection spectra of the samples were tested accordingly, and it showed that the reflection of the fabric coated by multilayer film was higher than that of the monolayer film. Moreover, the reflection increased with the increase of layer number. For sunlight fastness testing, the fabric color changed less with the increase of layer number, which showed the multilayer film on the fabric can improve the light resistance of the fabric. The mechanical property, the bending property and air permeability testing results showed that there was little change for the coated fabric compared with the original fabric.     

Load of Ag<Subscript>3</Subscript>PO<Subscript>4</Subscript> Particles on Sulfonated Polyphenylene Sulfide Superfine Fibre with High Visible-light Photocatalytic Activity

Ag₃PO₄ was loaded on sulfonated polyphenylene sulfide (SPPS) superfine fibre by a facile precipitation method. Both the structure and properties of the as-synthesized Ag₃PO₄/SPPS composites were characterized via XRD, SEM, EDS, XPS, FTIR, and UV-vis. The photocatalytic performance of Ag₃PO₄/SPPS composites was investigated via degradation of Methylene blue(MB) solution under visible light irradiation. The degradation results revealed that the photocatalytic activity of Ag₃PO₄/SPPS composites was greatly enhanced by the incorporation of Ag₃PO₄ with SPPS superfine fibre. For concentrations of AgNO₃ and Na₂HPO₄ solutions of 0.3 M and 0.06 M in the preparation process, the Ag₃PO₄/SPPS composite showed higher photocatalytic activity under visible light irradiation.     

Surface pretreatment of polyester fabric for ink jet printing with radio frequency O2 plasma

Plasma treatment of textiles is becoming more and more popular as a surface modification technique. It not only changes the outermost layer of a material without interfering with the bulk properties but also offers the advantage of greater chemical flexibility to obtain multifunctional textiles. Inkjet printing is becoming increasingly important and popular for the printing of textiles. When polyester fabric is inkjet printed with pigment-based inks, the printed patterns have poor color yield and easily bleeding. As a result, the fabric requires pretreatment prior to the stage of ink-jet printing. In the present study the polyester fabric was printed with magenta pigment ink after radio frequency O₂ plasma surface-treatment. At such condition, polyester fabric could obtain the effects of features with enhanced color yield and excellent pattern sharpness. The results showed that there were better patterns when the polyester fabric was treated for 9 min at a working pressure of 40 Pa and a working power 80 W. SEM images indicated that radio frequency oxygen plasma induced modifications to the surface of polyester fabric with more micro pits. Water absorption time measurement showed that the hydrophilicity of polyester fabric was remarkably improved after treatment. Anti-bleeding performance of the fabric was improved greatly, too. Therefore, radio frequency O₂ plasma treatment with the ink-jet printing technique could improve the final printed properties of polyester fabric.     

Multifunctional modification of wool fabric using graphene/TiO<Subscript>2</Subscript> nanocomposite

In this study, a new finishing technique is introduced through treatment of wool fabric with graphene/TiO₂ nanocomposite. Graphene oxide/titanium dioxide nanocomposite first applied on the wool fabric by hydrolysis of titanium isopropoxide in graphene oxide suspension and then this coating chemically converted by sodium hydrosulfite to graphene/TiO₂ nanocomposite. The homogenous distribution of the graphene/TiO₂ nanocomposite on the fiber surface was confirmed by field emission scanning electron microscopy (FE-SEM), Energy-dispersive X-ray spectroscopy (EDS) and X-ray mapping. X-ray diffraction patterns proved the presence of titanium dioxide nanoparticles with a crystal size of 127 Å on the treated wool fabric. Also, the defect analysis based on X-ray photoelectron spectroscopy (XPS) established the composition of the nanocomposite. Other characteristics of treated fabrics such as antibacterial activity, photo-catalytic self-cleaning, electrical resistivity, ultraviolet (UV) blocking activity and cytotoxicity were also assessed. The treated wool fabrics possess significant antibacterial activity and photo-catalytic self-cleaning property by degradation of methylene blue under sunlight irradiation. Moreover, this process has no negative effect on cytotoxicity of the treated fabric even reduces electrical resistivity and improves UV blocking activity.     

Preparation of the silk fabric with ultraviolet protection and yellowing resistance using TiO2/La(III) composite nanoparticles

In order to develop ultraviolet protection and yellowing resistance silk fabric, the silk fabric was treated with dispersive TiO₂/La(III) composite solution. The morphology, microstructure, ultraviolet protection and whiteness of the treated silk fabric were characterized by means of transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectra, X-ray diffraction and ultraviolet transmittance. Furthermore, the mechanism of the ultraviolet protection was investigated. The results show that the TiO₂/La(III) composite particles disperse uniformly. The TiO₂/La(III) particles can not only be treated onto the surface of the silk fabric but also can be treated into the interior of the silk fabric successfully. The result of Fourier transform infrared spectra and X-ray diffraction demonstrates that there are hydrogen bonds between the silk fabric and composite particles, and crystallinity of the treated silk fabric decrease when compares to the untreated silk fabric. The ultraviolet protection factor of the TiO₂/La (III) treated silk fabric is significantly higher than that of the untreated silk fabric. The main ultraviolet shielding effect of TiO₂ treated silk fabric is absorption. The La(III) treated SF has a bad ultraviolet shielding effect, but it has a certain reflection and absorption.     

Preparation of electroconductive,magnetic, antibacterial,and ultraviolet-blocking cotton fabric using reduced graphene oxide nanosheets and magnetite nanoparticles

The main goal of present study was the fabrication of cotton fabric with special functions, including electrical conductivity, magnetic, antibacterial, and ultraviolet (UV) blocking. In this regard, the cotton fabric was primarily coated with graphene oxide and then reduction of graphene oxide and synthesis of magnetite nanoparticles accomplished in one step. The alkaline hydrolysis of magnetite precursors and reduction of graphene oxide was simultaneously performed using sodium hydroxide to produce reduced graphene oxide/Fe₃O₄ nanocomposite on the fabric surface. The prepared cotton fabrics were characterized with field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). The treated fabrics with reduced graphene oxide/Fe₃O₄ nanocomposite displayed a low electrical resistivity i.e. 80 kΩ/sq. Furthermore, the coated fabrics showed reasonable magnetic properties due to the presence of magnetite nanoparticles on the surface of cotton fabrics. Moreover, this process imparted proper antibacterial properties and UV blocking activity to cotton samples.     

Development of UV Protective,Superhydrophobic and Antibacterial Textiles Using ZnO and TiO<Subscript>2</Subscript> Nanoparticles

In this research work, multifunctional cotton fabric comprising of UV protection, superhydrophobicity and antibacterial activity has been developed using facile pad-dry-cure method. In the first step, the concentration of repellent chemical has been optimized. Then, formulations containing nanoparticles of ZnO or TiO₂ along with optimized concentration of repellent chemical and organic-inorganic binder have been applied to cotton fabric followed by the evaluation of functional properties. The surface morphology and elemental composition of treated fabric has been characterized through SEM and EDX, respectively. The treated samples have shown promising UV protection, superhydrophobicity and antibacterial properties durable upto 20 washing cycles.     

Polyester metallisation with electroless silver plating process

In this paper, electroless silver plating process for polyester was reported. The electroless silver plating is basically divided into four stages including pre-cleaning, sensitisation, electroless silver deposition and post-treatment. As the electroless silver plating stage is the key stage in affecting the brilliant appearance and various functional properties such as conductivity and ultra-violet protection, we will study the effect of process variables, i.e. amount of silver nitrate (AgNO₃), concentration of ammonium hydroxide (NH₄OH), concentration of sodium hydroxide (NaOH) and process temperature, using increased amount of silver in fabric surface as an indicator, for optimising the electroless silver plating process for possible industrial application. Experimental results revealed that amount of silver nitrate (AgNO₃)=1.77×10^?3 mole; concentration of ammonium hydroxide (NH₄OH)=6.25 %; concentration of sodium hydroxide (NaOH)=0.008 g/ml and process temperature=25 °C can give the best electroless silver plating for polyester fabric. The surface characteristics of the electroless silver-plated polyester fabric were evaluated by scanning electron microscope, X-ray photoelectron spectroscopy and X-ray diffraction analysis. Meanwhile, the performance properties of the electroless silver-plated polyester fabric were measured by CIE L*, a* and b* values, conductivity as well as ultraviolet protection. The experimental results would be discussed thoroughly in this paper.     

Electrical conductivity and chromic behavior of poly (3-methylthiophene) — coated polyester fabrics

Electrically conductive substrates with chromic behavior are prepared using conductive polymer coating of the substrate. Poly (3-methylthiophene) (P3MT) — coated polyester fabric with specific electrical and chromic properties, for instance electrochromic and piezochromic behavior, was successfully obtained by chemical polymerization with the help of continuous and speed stirring technique. The effect of polymerization time, temperature and oxidant concentration on conductivity of the P3MT-coated fabric was studied. The presence of P3MT particles on the surface of the coated substrate was confirmed by scanning electron microscopy (SEM), fourier transform infrared (FTIR) and UV-Vis spectroscopy, electrical surface resistivity, pressure and applied voltage dependence visible reflectance spectrophotometer measurements, and X-ray diffraction (XRD) analysis. The blue shift of c95 nm in wavelength of maximum absorption observed in the reflectance spectra of coated polyester fabric. Under high pressure, the P3MT-coated polyester fabric demonstrated piezochromism. The coated substrate also showed electrochromic behavior under an electrical applied voltage of 12 V.     

Polyaniline-doped TiO<Subscript>2</Subscript>/PLLA fibers with enhanced visible-light photocatalytic degradation performance

A simple and practical strategy has been developed for preparing polyaniline(PANi)-doped TiO₂/poly(l-lactide) (P@TiP-C) fibers by a combination of coaxial-electrospinning and in-situ polymerization. The TiO₂/PLLA composite fibers with TiO₂ located on the surface were fabricated by coaxial-electrospinning, with PLLA as the core phase and a dispersion of TiO₂ particles, a well-known photocatalyst, in the sheath phase. The aniline monomers were also located in the core phase and in-situ polymerized by ammonium persulfate (APS) after electrospinning. SEM images show that TiO₂ particles were located on the surface of PLLA fibers. Photocatalytic degradation tests show that the P@TiP-C fibers exhibit enhanced photocatalytic activity for degradation of methyl orange under visible light, likely due to the synergistic effect of PANi and TiO₂.