Application of silver nanoparticles to cotton fabric as an antibacterial textile finish

A novel nano-silver colloidal solution was prepared in one step by mixing AgNO₃ aqueous solution and an amino-terminated hyperbranched polymer (HBP-NH₂) aqueous solution under vigorous stirring at room temperature. All results of Dynamic Light Scattering (DLS), Transmission Electron Microscopy (TEM) and UV/Visible Absorption Spectrophotometry indicated that silver nanoparticles had been formed in colloidal solution. Cotton fabric was treated with nano-silver colloid by an impregnation method to provide the cotton fabric with antibacterial properties. The whiteness, silver content, antibacterial activity and washing durability of the silver-treated fabrics were determined. The results indicated that the silver-treated cotton fabric showed 99.01 % bacterial reduction of Staphylococcus aureus and 99.26 % bacterial reduction of Escherichia coli while the silver content on cotton was about 88 mg/kg. The antimicrobial activity of the silver-treated cotton fabric was maintained at over 98.77 % reduction level even after being exposed to 20 consecutive home laundering conditions. In addition, the results of scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) confirmed that silver nanoparticles have been fixed and well dispersed on cotton fabrics’ surface and the major state of the silver presented on the surface was Ag⁰.     

Antibacterial Bombyx Mori silk fabric modified with reactive chitosan quaternary ammonium salt and its laundering durability

A new fiber-reactive chitosan derivative was synthesized in two steps from a chitosan of low molecular weight. First, a water-soluble chitosan derivative, N-[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride (short for HTCC), was prepared by reacting chitosan with 2,3-epoxypropyltrimethylammonium chloride. Second, HTCC was further modified by reacting with N-(hydroxymethyl)-acrylamide to prepare a fiber-reactive chitosan derivative, O-methyl acrylamide quaternary ammonium salt of chitosan (short for NMA-HTCC), which can form covalent bonds with silk fiber under alkaline conditions. The chemical structure of NMA-HTCC was characterized by Fourier transform infrared spectrum (FTIR) and nuclear magnetic resonance (NMR). The substitution degree of HTCC and the double-bond content of NMA-HTCC were tested. Then NMA-HTCC was used for antibacterial finishing of Bombyx Mori silk fabric. The results showed that silk fabric treated with NMA-HTCC had a significantly improved antibacterial activity to Staphylococcus aureus and Escherichia coli, and the antibacterial activity of silk fabric finished by NMA-HTCC was much better than that finished by chitosan and HTCC. Bombyx Mori silk fabric modified with NMA-HTCC demonstrated excellent durable antibacterial activity, even after 50 repeated launderings, the bacterial reduction rate of silk fabric maintained over 95 %.     

Synthesis of silver nanoparticles with sericin and functional finishing to cotton fabrics

This research presents a novel strategy to fabricate multi-functional cotton textiles. In this study, silver nanoparticles-sericin (Ag NPS-sericin) hybrid colloid has been prepared using sericin as reducing agent and dispersing agent. Cotton fabrics was oxidized selectively with sodium periodate (NaIO₄) to generate oxidized cotton fabrics, and which has then been finished using Ag NPS-sericin hybrid colloid prepared to obtain multi-functional cotton textiles. The finished cotton fabric not only possessed excellent antibacterial activity, but also it was modified functionally by sericin protein, which endowed antibacterial cotton fabrics relatively smooth surface and good wear ability. Fourier transform infrared spectrogram confirmed that sericin protein was grafted onto cellulose fibers. Ag NPs were characterized by UV-Vis spectroscopy, transmission electron microscope (TEM) and X-ray powder diffraction (XRD). The results of SEM, X-ray photoelectron spectroscopy (XPS) and EDS confirmed that silver nanoparticles and sericin been loaded successfully on the surface of cotton fabrics. The antibacterial experiments showed bacterial reduction rates of S.aureus and E.coli were able to reach above 99 %. After washing 20 times, it showed still good antibacterial activity at over 95 % against S.aureus and E.coli.     

Adhesion and durability of Cu film on polyester fabric prepared by finishing treatment with polyester-polyurethane and aqueous acrylate

To improve adhesion and wear durability at the interface between copper (Cu) film and polyester fabric, the Cu-coated polyester fabric was treated by two commercial solutions of polyester-polyurethane (PP) and aqueous acrylate (AC) as finishing process respectively. Both finishing agents with 5 %, 10 %, 15 %, 20 %, 25 %, 30 %, 35 % and 40 % concentrations were coated on the Cu-coated fabrics by a padding method in this study. The surface morphologies of the coated polyester fabric before and after finishing were characterized by scanning electron microscopy (SEM). The adhesion of Cu-coated film before and after the finishing treatments was measured with scotch tape method; the durability was evaluated by colorfastness to washing, crocking and perspiration. Additionally, Ultraviolet (UV) shielding, water repellency and CIE L*a*b of the Cu-coated polyester fabric before and after the finishing treatments were determined. The Cu-coated polyester fabric has a high adhesion property of the 5 level, colorfastness to washing, wet crocking and perspiration of the Cu-coated fabric were obviously enhanced to level 5, level 4-5 and level 3-4. Meanwhile, The Cu-coated polyester fabric kept an excellent UV protection with UPF value over 68 after finishing treatment with PP and AC. The results demonstrate the finishing treatment with the PP presented effectively in durability performance than the AC for the Cu-coated polyester fabric.     

Durable antibacterial cotton modified by silver nanoparticles and chitosan derivative binder

This article focuses on the functional finishing of textiles using silver nanoparticles (AgNPs) and chitosan derivative binder, which was synthesized by a modification of chitosan using α-ketoglutaric acid. The binder covalently linked to cotton fabric via esterification of the hydroxyl groups on the cotton surface, and tightly adhered to surface of the AgNPs by coordination bonds. As a result, the coating of AgNPs on the cotton fabric showed excellent antibacterial property and laundering durability. After 30 consecutive laundering cycles, the Ag content on the fabrics decreased to 37.6 %, but the bacterial reduction rates against both S. aureus and E. coli were maintained over 95 %. It has potential applications in a wide variety of fields such as sportswear, socks, and medical textile.     

Antibacterial finishing of cotton fabric via the chitosan/TPP self-assembled nano layers

In this study, chitosan and pentasodium tripolyphosphate (TPP)-based bilayers were fabricated on the cationized woven cotton fabrics via layer-by-layer (LBL) self-assembly technique. The initial cationic charges on cotton fabric were produced through the aminization procedure involving the covalent attachment of reactive dye to cotton fabric and subsequent reductive cleavage of the dye to free amine. Different numbers of bilayers (1, 5, and 10) consisting of chitosan/TPP have been deposited on the fabrics. The surface morphology, cationic group content, chemical surface modification, whiteness index, surface tension and antibacterial properties of the modified cotton samples were investigated using scanning electron microscopy (SEM), methylene blue test, FTIR, reflectance spectroscopy, water contact angle measurements and antibacterial test, respectively. The bacterial inhibition experiments demonstrated that the modified cotton fabric with the addition of chitosan/TPP bilayers can increase the degree of inhibition on E. coli and S. aureus bacteria. The utilized LBL method was an easy and cost-effective procedure for developing of novel antibacterial textiles with the highly attractive feature in the medical and hygienic products.     

Preparation of electroconductive,magnetic, antibacterial,and ultraviolet-blocking cotton fabric using reduced graphene oxide nanosheets and magnetite nanoparticles

The main goal of present study was the fabrication of cotton fabric with special functions, including electrical conductivity, magnetic, antibacterial, and ultraviolet (UV) blocking. In this regard, the cotton fabric was primarily coated with graphene oxide and then reduction of graphene oxide and synthesis of magnetite nanoparticles accomplished in one step. The alkaline hydrolysis of magnetite precursors and reduction of graphene oxide was simultaneously performed using sodium hydroxide to produce reduced graphene oxide/Fe₃O₄ nanocomposite on the fabric surface. The prepared cotton fabrics were characterized with field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). The treated fabrics with reduced graphene oxide/Fe₃O₄ nanocomposite displayed a low electrical resistivity i.e. 80 kΩ/sq. Furthermore, the coated fabrics showed reasonable magnetic properties due to the presence of magnetite nanoparticles on the surface of cotton fabrics. Moreover, this process imparted proper antibacterial properties and UV blocking activity to cotton samples.     

N-halamine-bonded cotton fabric with antimicrobial and easy-care properties

N-halamine precursor 2,2,6,6-tetramethyl piperidinol (TMP), a hindered amine light stabilizer, was bonded onto cotton fabric by using 1,2,3,4-butanetetracarboxylic acid (BTCA) as a crosslinking agent. A variety of treating conditions including TMP concentration, curing temperature and time, and catalyst were studied. The treated fabrics were characterized using FTIR spectra and scanning electron microscope (SEM). The cotton fabric treated with TMP precursor could be rendered biocidal upon exposure to dilute household bleach. The chlorinated cotton swatches showed great efficacy and inactivated 100 % of Staphylococcus aureus with 7.1 log reduction with 5 min of contact and 83.25 % of E. coli O157:H7 at 10 min of contact. In addition, the wrinkle recovery angle of the treated cotton fabrics increased from 229 ° of untreated cotton fabrics to 253 °. This study provided a practical finishing process to produce cotton fabrics with easy care and antibacterial functionalities at the same time.     

Antibacterial finishing of cotton fabrics using biologically active natural compounds

The paper discusses a method to functionalize cotton fabrics using biologically active natural compounds to achieve the antibacterial characteristics required for medical application. The biologically active natural compounds include propolis, beeswax, and chitosan. Three 100 % cotton knitted fabrics with different degrees of compactness were impregnated in the emulsions containing the active ingredients and fabric variant G3 with the highest degree of impregnation was considered for the evaluation of the antibacterial properties and comfort characteristics. The results show that the treated cotton fabric had high antibacterial activity against both gram positive bacteria Staphylococcus aureus and Streptococcus β haemolytic, and gram negative bacteria Escherichia coli and Pseudomonas aeruginosa. The presence of the biologically active natural compounds on the cotton substrates modified the surface of the textile fibers as seen in the SEM images. The treatment also improved fabric comfort properties, the cotton substrates became less air permissive and more hygroscopic after the treatment. The experimental results indicated that propolis, beeswax and chitosan can be applied as an emulsion to functionalize cotton textile materials. The antibacterial performance of the functionalized fabrics suggested that the cotton fabrics treated with those biologically active natural compounds have the potentials to be used in medical fields.     

Ultrasonic dyeing of cationized cotton fabric with natural dye. Part 2: Cationization of cotton using Quat 188

The dyeing of cationized cotton fabric with 3-chloro-2-hydroxypropyltrimethyl ammonium chloride 69% (Quat 188) using Cochineal dye was studied using both conventional and ultrasonic techniques. Factors affecting dye extraction and dye bath exhaustion were investigated. The results indicated that the dye extraction by ultrasound at 300 W was more effective at lower temperatures and times than conventional extraction. Also, the colour strength values obtained were found to be higher with ultrasound than with conventional techniques. However, the results showed that the fastness properties of the dyed fabrics with ultrasound are similar to those of the conventional dyed fabrics. The scanning electron microscope (SEM) and X-ray diffraction (XRD) were measured for cationized cotton fabrics dyed with both conventional and ultrasound techniques, thus showing the sonicator efficiency.     

Effect of various shapes of zinc oxide nanoparticles on cotton fabric for UV-blocking and anti-bacterial properties

Various shapes of ZnO — multi-petals, rod and spherical — were prepared and then applied on cotton fabric for UV-blocking and anti-bacterial properties. The ZnO particles were investigated by XRD and SEM. The as-prepared suspension was applied onto cotton fabrics via the pad-dry-cure process at 150 °C. The characteristics of the fabric coating were investigated by SEM, XRD and Atomic Absorption Spectroscopy (AAS). The UV-blocking effectiveness was measured with a UV-Vis spectrophotometer whilst the antibacterial activity was determined using the AATCC 147 method. The results of XRD and SEM on the ZnO powders show that we can produce various shapes of ZnO. The investigation by SEM and AAS clearly revealed that ZnO was effectively deposited on the cotton surface and that the adhesion was retained after washing ten cycles. The sphericals-shaped ZnO and multi-petals shaped ZnO coated fabrics show excellent UV-blocking properties. All treated samples showed good antibacterial activity against Staphylococcus Aureus. The shape of ZnO shows no considerable effect on antibacterial properties.     

The effect of alkali pre-treatment on formation and adsorption of silver nanoparticles on cotton surface

This study is an attempt to investigate the feasibility of alkali pre-treatment to activate surface hydroxyl groups of cellulose fibers in order to enhance the deposition efficiency of silver nanoparticles (AgNPs) onto cotton fabrics. Cotton samples were pre-treated with various alkali solutions containing different earth metal hydroxides (LiOH, NaOH, and KOH). The as-prepared samples were then treated with aqueous silver nitrate followed by reduction treatment with aqueous ascorbic acid, which caused in situ formation of AgNPs on fiber surfaces. The surface structure of the fabrics was characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) analysis, and colorimetric data. The amount of silver was measured by using inductively coupled plasma-optical emission spectrometer (ICP-OES). Antimicrobial activity was measured against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli bacteria. It was established that alkali pre-treatment had a substantial effect on the formation and adsorption of AgNPs on the fibers. Alkali pre-treated samples were homogeneously coated by AgNPs with high surface coverage. Alkali type had significant effect not only on the amount of AgNPs on the surface but also on its size. High antibacterial activity against both Gram-positive and Gram-negative strains was also demonstrated, even after 10 cycles washing.     

Dimensional stabilization of cotton plain weft knitted fabric using mercerization treatment

Investigation on dimensional stability of cotton plain weft knitted fabric manufactured from rotor spun yarn, subjected to mercerization treatment has been represented. Several fabric samples were mercerized considering variation in time of treatment, bath temperature, concentration of alkali solution and also mercerizing tension. Values of constant of course (K _c ), constant of wale (K _w ), the area geometry constant (K _s ) which are indicative of fabric dimensional stability were calculated after treatment for mercerized samples. Then, these values were compared with those of un-treated samples subjected to dry and wet relaxation and also were compared with each other. Based on the effect of each variable itself and their simultaneous effect, it was concluded that, mercerization treatment and considered parameters had a distinctive influence on dimensional stability of the fabric. Mercerized samples had better dimensional stability in comparison with un-treated ones. A comprehensive experimental analysis showed that, there is meaningful difference between K _s values of the samples mercerized at various conditions. Also, the area geometry constant (K _s ) achieved after treatment was higher than that of other relaxation methods.     

全球棉花及棉纺织品和服装零售的趋势

1全球棉价走势 全球棉价的长期平均值为每磅72美分。自1995年WTO农业协议生效以来，全球棉价持续走低，2001年跌至每磅42美分左右，是29年以来的最低水平（见图1）。仅在2003年11月棉价才在短期内突破76美分（见图2）。随后又急剧下跌，于2004年12月跌至每磅43美分。棉价上涨的主要原因是棉价触底后。全球棉花库存持续减少，供需失衡造成的。近期棉价（2005年11月17日）维持在每磅56美分左右。     

Preparation of the cotton fabric with ultraviolet resistance and antibacterial activity using nano attapulgite colloidal particles

A carefully designed surface modification technique for the preparation of multifunctional cotton fabric was successfully developed by the functionalization of cotton fabric with nano attapulgite (ATP) colloidal particles. The dispersion of the nano ATP colloidal particles, the morphology, microstructure, thermal stability, ultraviolet resistance, antibacterial activity and air permeability of the treated cotton fabric were characterized. The results showed that the particle size of the ATP particle distributed between 100 nm to 150 nm after dispersion. The SEM (scanning electron microscopy) and FTIR (Fourier transform infrared spectra) analysis demonstrated that the ATP particles were successfully introduced to surface of the cotton fabric. The structural and thermal stability of the treated fabric were higher than those of the untreated fabric. The ATP treated cotton fabric possessed excellent ultraviolet resistance and antibacterial activity. Furthermore, the treatment did not affect the wear ability of the cotton fabric. The multifunctional cotton fabric meets the market demand for natural products.     

Developing UV-protective cotton fabric based on SiO<Subscript>x</Subscript> nanoparticles

Nano-SiO_x suspension was prepared for its unique optical performance to improve the anti-ultraviolet property of cotton fabric in this paper. The experimental results showed that UV-resistance property of thus treated fabrics had been enhanced significantly. The spectrum of absorption, reflection, and transmittance of the treated fabric was analyzed during the optimized processing. The mechanical property of the treated fabric displayed a little increase compared with the original untreated fabric. The morphology of the treated fabric was studied by SEM. The UPF (Ultraviolet Protection Factor) of the fabric treated with nano-SiO_x suspension reached 62, much higher than that of the original untreated fabric. Moreover, after 50 home launderings, the UV-blocking property of treated fabric changed little due to the strong affinity between the nano-SiO_x particles and cotton fiber.     

Durable press finish of cotton fabric using malic acid as a crosslinker

It has been considered that malic acid,α-hydroxy succinic acid, could not form crosslinks in the cellulosic materials unless activated by other polycarboxylic acids such as butanetetracarboxylic acid or citric acid because there are only two carboxylic acids per molecule available for the formation of one anhydride intermediate. However we found that the dicarboxylic malic acid with sodium hypophosphite catalyst without the addition of other crosslinkers was able to improve wrinkle resistance of cotton up to 294° (dry WRA) and 285° (wet WRA), which is a measure of crosslinking level in cotton.¹H FT-NMR, FT-IR and GPC analysis indicated the in-situ formation of an trimericα, β-malic acid with a composition of 1:3 through the esterification between hydroxyl group and one of carboxylic groups in malic acid during curing. The crosslinking of cotton was attributed to the trimericα, β-malic acid, a tetracarboxylic acid, which can form two anhydride rings during curing. The influence of crosslinking conditions such as concentrations of malic acid and catalyst, pH of the formulation bath, and curing temperature were investigated in terms of imparted wrinkle resistance and whiteness. The addition of reactive polyurethane resin in the formulation slightly increased the mechanical strength retention of crosslinked fabric coupled with additional increase in wrinkle resistance.     

Double Protect Copper Nanoparticles Loaded on L-cysteine Modified Cotton Fabric with Durable Antibacterial Properties

In this work, we developed a new method that can achieve immobilization and protection of the Cu NPs coating on the cotton fabrics by a simple two-step impregnation method. Firstly, L-cysteine (Cys) was grafted onto cotton fabric via esterification with the hydroxyl groups of cellulose, then Cu NPs were introduced on the fabric surface in the presence of a protective reagent, citric acid. Due to the doubled stabilization acts of Cys and citric acid, the Cu NPs immobilized on the fabric surface showed an excellent antibacterial effect and outstanding laundering durability. As a result, the mean size of the Cu NPs coating on the cotton fabric is about 62.4 nm, and the modified cotton fabrics showed satisfactory antibacterial ability against both S. aureus and E. coli, which the bacterial reduction rates are all higher than 98 % even withstand 50 washing cycles. Therefore, this method to prepare antibacterial cotton fabrics showed great potential applications in socks, cosmetic, and medical textiles.     

Optimization of dyeing condition for wool/cotton union fabric with direct dye using box-behnken design

Wool/cotton union fabric was dyed with a direct dye in union shade. The dyeing was performed in a single bath in relation to four factors: leveling agent (Lyogen SMKI, 0–1.5 % oww), electrolyte (sodium sulfate, 0–10 %), dyeing temperature (85–95 °C), and dyeing time (15–60 min). The dyeing was characterized by dye bath exhaustion (%), color strength (K/S value), washing fastness, and light fastness of dyed sample. Response surface analysis showed that the exhaustion of direct dye increased with electrolyte, dyeing temperature, and dyeing time while the K/S value followed a linear shape with leveling agent and dyeing temperature. An optimized recipe was formulated based on response surface strategy and numerical optimization solution.     

Antibacterial properties and color fastness of silk fabric dyed with turmeric extract

The use of non-toxic and eco-friendly natural dyes on textiles has received much attention due to the increased environmental awareness in order to avoid some hazardous synthetic dyes. In the present study, an eco-friendly approach was developed to impart color and antibacterial properties to silk fabrics dyed with turmeric extract as a non-toxic natural colorant. The natural colorant was extracted from Curcuma Longa rhizome. Copper sulfate, ferrous sulfate and potassium aluminium sulfate were applied in a pre-metallization process as mordanting agents. Antibacterial properties of treated fabrics were evaluated against common pathogenic bacteria, Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). The effects of dye concentration and mordant types on the obtained color hues, antibacterial efficiency and color fastness of the fabrics were investigated. The results indicated that mordanted and dyed fabrics possessed desirable antibacterial properties. Complete antibacterial activity of the treated fabrics was obtained with 3 %owf (on weight of the fabric) copper sulfate. It was also shown that increasing the dye concentration could lead to a more efficient antibacterial activity on the mordanted dyed fabrics. An optimum level of the antibacterial activity was observed in the sample treated with 30 %owf of turmeric. Furthermore, the results of CIE L*, a*, b* values, FTIR, washing, light and rubbing fastnesses of the dyed fabrics were reported. The mordanted dyed silk fabrics exhibited desirable color fastness properties. These studies proved a direct relationship between the degree of antibacterial activity of the fabrics treated with turmeric and the metals ion concentration.