Gas Separation Polysulfone Membranes Modified by Cadmium-based Nanoparticles

This paper presents new mixed-matrix membranes (MMMs) synthesized via incorporating hexamethylenetetramine dicyanamide cadmium nanoparticles, a metal organic framework (MOF), into the polysulfone (PSF) matrix. The MMMs are characterized using FTIR and SEM analyses, and their gas permeation properties are evaluated at different MOF loadings and various pressures. The results show that the nanoparticle is compatible with the polymer and distributes homogenously in the matrix. Compared to the pristine PSF membrane, the MMM with 2.5 wt. % of the MOF nanoparticles has lower CO₂, CH₄, N₂ and O₂ permeabilities but significantly higher CO₂/CH₄, CO₂/N₂ and O₂/N₂ gas pair selectivities (i.e., 41.66, 20.08 and 5.09, respectively, which are 42.6, 61.6 and 60.02 % higher). As the total pressure increases, the gas permeabilities of the pristine PSF membrane and the MMMs decrease, but their sieving abilities increase. These results suggest that gas selectivities of high free-volume polymers with poor sieving abilities can be improved by incorporating the MOF into the polymer.     

Thermal and mechanical properties of modified CaCO3 filled poly (ethylene terephthalate) nanocomposites

Poly(ethylene terephthalate) (PET)/CaCO₃ and PET/modified-CaCO₃ (m-CaCO₃) nanocomposites were prepared by melt blending. The morphology indicated that m-CaCO₃ produced by reacting sodium oxalate and calcium chloride, was well dispersed in PET matrix and showed good interfacial interaction with PET compared to CaCO₃. No significant differences in the thermal properties such as, glass transition, melting and degradation temperatures, of the nanocomposites were observed. The thermal shrinkage of PET at 120 °C was 10.8 %, while those of PET/CaCO₃ and PET/m-CaCO₃ nanocomposites were 2.9–5.2 % and 1.2–2.8 %, respectively depending on filler content. The tensile strength of PET/CaCO₃ nanocomposite decreased with CaCO₃ loading, whereas that of PET/m-CaCO₃ nanocomposites at 0.5 wt% loading showed a 17 % improvement as compared to neat PET. The storage modulus at 120 °C increased from 1660 MPa for PET to 2350 MPa for PET/CaCO₃ nanocomposite at 3 wt% loading, and 3230 MPa for PET/m-CaCO₃ nanocomposite at 1 wt% loading.     

Preparation and crystallization behavior of polylactide nanocomposites reinforced with POSS-modified montmorillonite

We herein report the preparation and crystallization behavior of polylactide (PLA) nanocomposites reinforced with polyhedral oligomeric silsesquioxane-modified montmorillonite (POSS-MMT), which is prepared by exchanging sodium cations of pristine sodium montmorillonite (Na-MMT) with protonated aminopropylisobutyl polyhedral oligomeric silsesquioxane (POSS-NH₃ ⁺). PLA nanocomposites with 1–10 wt% POSS-MMT contents are manufactured via melt-compounding, and their structures and melt-crystallization behavior are investigated. It is characterized that POSS-MMT nanoparticles in the nanocomposites have an exfoliated structure of MMT silicates with POSS-NH₃ ⁺ and partial POSS-NH₂ crystals. DSC cooling thermograms suggest that the overall melt-crystallization rates of the nanocomposite with only 3 wt% POSS-MMT are remarkably enhanced in comparison with the neat PLA. From the isothermal crystallization analysis based on the Avrami model, the overall melt-crystallization of PLA/POSS-MMT nanocomposites is found to be dominated by the heterogeneous nucleation and three-dimensional spherulite growth. Isothermal melt-crystallization experiments using a polarized optical microscope show that the spherulite nucleation density of PLA/POSS-MMT nanocomposites is much higher than that of the neat PLA, whereas the spherulite growth rates of all the nanocomposites are almost identical with the rate of the neat PLA. It is concluded that the highly enhanced melt-crystallization rates of PLA/POSS-MMT nanocomposites stem from the dominant nucleation effect of POSS-MMT nanoparticles for PLA crystals.     

Properties of modified ethylene terpolymer/poly(lactic acid) blends based films

In order to explore an alternative method instead of plasticization for improving the toughness, flexibility and processability of PLA based packaging films, two different kinds of modified polyethylene based elastomers, such as glycidyl methacrylate or maleic anhydride functionalized ethylene-acrylate based elastomers, were melt blended with PLA. Their properties were compared with conventional PEG plasticized PLA. The chemical interaction between end groups of PLA and epoxide or maleic anhydride functional groups of elastomers was shown by FTIR. Scanning electron microscopy showed that up to 20 % PEG loading, one phase morphology was achieved, however beyond this point, a phase separation was observed for plasticized PLA. For PLA/elastomer blends, a two-phase morphology was obtained as a result of immiscible nature of PLA and elastomers. Tensile and dynamic mechanical properties indicated that elastomer based blends were better than plasticized PLA independently from elastomer type. Differential scanning calorimeter (DSC) analysis exhibited that the T _g value was remarkably lowered in the plasticized PLA; however, it did not change in the case of elastomers. In terms of oxygen permeability and biodegradability, plasticized PLA was found to be better than elastomer based blends.     

Preparation of collagen fiber/CaCO3 hybrid materials and their applications in synthetic paper

The collagen fiber/CaCO₃ hybrid materials were successfully prepared via in situ organic-inorganic hybrid technique. The surface morphology, hybrid mechanism, thermal and hydrothermal stability of these materials were investigated, respectively. Scanning electron microscopy (SEM) analysis showed that the size scale and distribution of CaCO₃ particles in collagen fiber relied on the concentration of CaCl₂. When the CaCl₂ was at low concentration, for example 6 wt%, the in-situ produced CaCO₃ particles were distributed evenly around the collagen fiber, the particle size could be controlled in the range of 2–4 µm and no apparent coagulation of CaCO₃ particles was found. Fourier transform infrared spectroscopy (FTIR) study revealed the interactions between the collagen fiber and CaCO₃ particles. The water solubility test and TGA analysis indicated that the solubility of collagen fiber in hot water decreased significantly after hybridization with CaCO₃ particles, whereas, the decomposition temperature was improved with increasing of the production of CaCO₃ particles. Moreover, the hybrid materials were used in conjunction with polyurethane and CaCO₃ powder to fabricate a novel synthetic paper. The result showed that the synthetic paper had good writing and printing.     

Preparation and characterization of intumescent flame retardant biodegradable poly(lactic acid) nanocomposites based on sulfamic acid intercalated layered double hydroxides

A novel sulfamic acid intercalated MgAl-LDH (SA-LDH) was prepared by intercalating NH₃SO₃^? into MgAl-layered double hydroxides (LDH), and it was then introduced into poly(lactic acid) (PLA) resin in association with intumescent flame retardant (IFR) by melt blending to prepare a flame-retardant biodegradable PLA composite. The effects of SA-LDH on the flame retardancy of PLA composites were characterized by limiting oxygen index (LOI), vertical burning test (UL-94) and cone calorimeter test (CONE). The results showed that the composite sample containing 19.0 wt% IFR and 1.0 wt% SA-LDH achieved the maximal LOI value of 48.7 %, passed the UL-94 V-0 rating, and significantly decreased the peak heat release rate from 306.3 kW/m² of neat PLA to 58.1 kW/m². Thermogravimetric analysis showed that both the thermal stability and the char formation were enhanced. The char morphology observation revealed that SA-LDH was beneficial to form dense and compact char layers. It was demonstrated that there existed a synergistic effect between IFR and SA-LDH in promoting the char formation and enhancing the fire resistance. The mechanical and crystallization properties were also tested and discussed.     

Influence of irrigation frequency on greenhouse gases emission from a paddy soil

Water management is known to be a key factor on methane (CH₄), carbon dioxide (CO₂), and nitrous oxide (N₂O) emissions from paddy soils. A field experiment was conducted to study the effect of continuous irrigation (CI) and intermittent irrigation (II) on these emissions. Methane, CO₂, and N₂O emissions from a paddy soil were sampled weekly using a semi-static closed chamber and quantified with the photoacoustic technique from May to November 2011 in Amposta (Ebro Delta, NE Spain). Intermittent irrigation of rice paddies significantly stimulated (N₂O + N₂)–N emission, whereas no substantial N₂O emission was observed when the soil was re-wetted after the dry phase. The cumulative emission of (N₂O + N₂)–N was significantly larger from the II plots (0.73 kg N₂O–N ha^?1 season^–1, P < 0.05) than from the CI plots (?1.40 kg N₂O–N ha^?1 season^?1). Draining prior to harvesting increased N₂O emissions. Draining and flooding cycles controlled CO₂ emission. The cumulative CO₂ emission from II was 8416.35 kg CO₂ ha^?1 season^?1, significantly larger than that from CI (6045.26 kg CO₂ ha^?1 season^?1, P < 0.05). Lower CH₄ emission due to water drainage increased CO₂ emissions. The soil acted as a sink of CH₄ for both types of irrigation. Neither N₂O–N nor CH₄ emissions were affected by soil temperature. Global warming potential was the highest in II (4738.39 kg CO₂ ha^?1) and the lowest in CI (3463.41 kg CO₂ ha^?1). These findings suggest that CI can significantly mitigate the integrative greenhouse effect caused by CH₄ and N₂O from paddy fields while ensuring the highest rice yield.     

Enhanced physico-mechanical properties of polyester resin film using CaCO<Subscript>3</Subscript> filler

Bio-based CaCO₃ powder was synthesized via size reduction method from waste eggshells. The XRD analysis revealed that eggshell powder consists of CaCO₃ in calcite form. The inclusion level of CaCO₃ contents were varied of 5, 10, 15, 20 and 25 wt.% of prepared CaCO₃-polyester film. Effects of different proportions of prepared chicken eggshell and commercial CaCO₃ filler on the polyester resin composites films were compared by means of mechanical and physical test. It was found that the addition of CaCO₃ filler to the polyester films leads to improve the mechanical properties. The findings revealed that the best and optimum CaCO₃ filler content was 10 wt.% and among the prepared polyester films, eggshell CaCO₃-polyester films showed the best performance. The mechanical properties of CaCO₃-polyester films were measured in terms of tensile strength, elongation-at-break, tensile modulus, flexural strength and impact strength. For eggshell CaCO₃- polyester films, the maximum values of the aforementioned mechanical properties were 52.70 MPa, 4.63 %, 1868.70 MPa, 101.20 MPa and 8.40 kJ/m², respectively, whereas for commercial CaCO₃-polyester films those values were 48.12 MPa, 4.50 %, 1790.30 MPa, 97.50 MPa and 8.21 kJ/m², respectively. Further, water absorption of the composite films as a function of time had also been investigated at 10 wt.% filler content.     

Preparation of Polyurethane Silicon Oxide Nanomaterials as a Binder in Leather Finishing

Leather finishing processes using toxic organic solvent based produce volatile organic compounds (VOC), chronic exposure to this chemicals effect on workers' health causing many diseases especially lung cancer. So, polyurethane waterbased was synthesized for application in leather finishing instead of organic solvent based because it’s economic and safety for industry and workers. Preparation of water-based polyurethane (PU) depends on the reaction of polyethylene glycol (PEG, 300) with isophorone diisocyanate (IPDI) and the reaction of IPDI-1,4-butanediol (BDO) together with dimethylolpropionic acid (DMPA), was synthesized by poly-addition polymerization reaction. PU was then modified with different amounts of silicon dioxide nanoparticles (1-5 % SiO₂), used as a binder in leather finishing. Leather coated was characterized physically, chemically and thermally by FTIR, GPC, DLS, TEM, SEM and TGA. The results revel that, water vapor permeability (WVP) of leather coated with PU modified with SiO₂ showed improvement due to the existence of SiO₂ particles which increases the interspaces of the polyurethane coating. SEM showed that when the amount of SiO₂ nanoparticles increases, there is uniform nanoparticles accumulated can be observed. EDX prove the presence of Si and O₂ elements and the formation of SiO₂ nanoparticles. Mechanical properties discussed that tensile strength; tear strength and elongation at break % increase with increase SiO₂ concentration until 3 % SiO₂ nanoparticles. TGA showed an improvement of thermal stability of coated leather modified with SiO₂. Therefore, this study succeeded in preparation of safe, ecofriendly of water-based polyurethane binders which modified with SiO₂ for using in leather finishing.     

Controlling the Properties of OPEFB/PLA Polymer Composite by Using Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> for Microwave Applications

Microwave-absorptive polymer composite materials provide protection against interference to communication systems caused by microwave-inducing devices. Microwave-absorptive polymer composites were prepared from polylactic acid (PLA) biocomposite blended with oil palm empty fruit bunch (OPEFB) fiber and commercial Iron oxide (Fe₂O₃) as filler using the melt-blending method. The composites characterization was carried out using the scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. The coefficient of reflection S₁₁ and coefficient of transmission S₂₁ of the composites for various Fe₂O₃ filler percentages were determined using a rectangular waveguide in connection with microwave vector network analyser (HP/Agilent model PNA N5227). These coefficients were then used to calculate microwave-absorption properties (in decibels). XRD analysis showed that increasing amounts of reinforced material (Fe₂O₃) reduces the crystallinity of the composites. SEM data indicated that Fe₂O₃ filler ratio increased in the composites, and adhesion to the cellulose fiber grew gradually until the highest percentage of filler was added. The complex relative permittivity and relative permeability were obtained within the broad frequency range of 8–12 GHz at room temperature for various percentages of filler and were measured by the transmission/reflection method using a vector network analyser. Fe₂O₃ embedment in OPEFB/PLA was observed to have resulted in enhancing the dielectric and magnetic properties. The values of permittivity and permeability increased with increasing Fe₂O₃ filler content. Theoretical simulation studied the relation between ε′ and ε″ of the relative complex permittivity in terms of Cole-Cole dispersion law. The result indicated that the processes of Debye relaxation in Fe₂O₃/OPEFB/PLA, the unique dielectric characteristics of Fe₂O₃ cannot be accounted for by both the Debye dipolar relaxation and natural resonance. Results further showed that the material transmission, reflection, and absorption properties could be controlled by changing the percentage of Fe₂O₃ filler in the composites.     

Effect of organic,inorganic and slow-release urea fertilisers on CH<Subscript>4</Subscript> and N<Subscript>2</Subscript>O emissions from rice paddy fields

Vietnam is one of the world’s top two rice exporting countries. However, rice cultivation is the primary source of agriculture’s greenhouse gas (GHG) emissions in Vietnam. In particular, strategies are required to reduce GHG emissions associated with the application of organic and inorganic fertilisers. The objective of this study was to assess the effects of various combinations of biochar (BIOC), compost (COMP) and slow-release urea (SRU) on methane (CH₄) and nitrous oxide (N₂O) emissions. In total, 1170 gas samples were collected from closed gas chambers in rice paddies at Thinh Long commune and Rang Dong farm in northern Vietnam between June and October 2014. The gas samples were analysed for CH₄-C and N₂O-N fluxes using gas chromatography. The application of BIOC alone resulted in the lowest CH₄ emissions (4.8–59 mg C m^?2 h^?1) and lowest N₂O emissions (0.15–0.26 µg N m^?2 h^?1). The combined application of nitrogen–phosphorus–potassium (NPK) + COMP emitted the highest CH₄ (14–72 mg C m^?2 h^?1), while ½NPK + BIOC emitted the highest N₂O (1.03 µg N m^?2 h^?1 in the TL commune), but it was the second lowest (0.495 µg N m^?2 h^?1) in the RD farm. Green urea and orange urea reduced N₂O emissions significantly (p < 0.05) compared to white urea, but no significant differences were observed with respect to CH₄ emissions. SRU fertilisers and BIOC alone measured the lowest greenhouse gas intensity, i.e. <2.5 and 3 kg CO₂ eq. kg^?1 rice grain, respectively. Based on these results, application of fertilisers in the form of BIOC and/or orange or green urea could be a viable option to reduce both CH₄ and N₂O emissions from rice paddy soils.     

Study on morphological, rheological and physico/mechanical behavior of SEBS/CaCO3 nanocomposite

This work focuses on the modification of the mechanical properties and morphology, cure behavior and other characterization of nano CaCO₃ filled SEBS (Styrene-ethylene-butadiene-styrene) elastomers. The tensile strength was increased and compression set characterization was decreased with increasing content of nCaCO₃ value. The influence of the interfacial area and the volume fraction of filler were studied. Furthermore, isothermal cure characterization of neat and filled systems was performed using a torque rheometer. The most important finding base on the rheological studies was the catalytic effect of nCaCO₃ on cure reaction of SEBS, leading to the shorter curing time. Moreover, the kinetic analyses of rheograms revealed a marked decrease in the activation energy of the cure process upon raising nCaCO₃ content. Interestingly, MFI, Hardness, Tensile, Compression set testes showed that the hardness and tensile properties were dramatically increased and MFI and elongation decreased by the addition of nano CaCO₃ into SEBS system compared to pure blend resin. It was shown that the relative increase in tensile yield stress when increasing amount of interfacial agent was added, both depends on the volume of filler and the interfacial area. The nanoparticles shape, size and dispersion state were investigate through X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) method.     

Gaseous emissions from soil biodisinfestation by animal manure on a greenhouse pepper crop

Soil solarisation together with the application of animal manure has been described as an alternative process for control of Phytophthora capsici root rot in pepper crops. A mixture of fresh sheep manure and dry chicken litter (SCM) and a semi-composted mixture of horse manure and chicken litter (HCM) were applied at 5.1 kg m⁻² (dry weight) under plastic sheets to reduce Phytophthora inoculum survival rate and disease incidence. Non-solarised (C) and solarised (S) soils were used as control treatments. Mean NH₃ concentration increased in SCM during biodisinfestation process (14.8 mg NH₃ m⁻³) compared with HCM (9.1 mg NH₃ m⁻³), accounted for the higher organic N content and potential N mineralisation. The higher NH₃ concentration in SCM could have contributed to reduce the inoculum survival rate (30.6% and 75.0% in SCM and HCM plots, respectively). Inoculum survival rate was not reduced in S (94.4%) as temperature was below 33 °C throughout the experimental period. After biodisinfestation treatment, N₂O and CO₂ emissions tended to be higher in SCM, despite high spatial variability. Cumulative N₂O emissions were 1.31 and 0.42 g N₂O-N m⁻² in SCM and HCM after 43 days. The larger N application and organic N mineralisation rate on fresh manure amended soils might have contributed to higher N₂O emissions during and after soil biodisinfestation by denitrification and nitrification, respectively. Cumulative CO₂ emission averaged 211.0 and 159.9 g CO₂-C m⁻² in SCM and HCM, respectively. The soluble organic C, more abundant in fresh manure, might have favoured soil respiration in SCM. Disease incidence decreased in SCM and HCM plots (disease incidence, 2%-8%) in relation to solarised soils (42%) after 4 months. Microbial suppressiveness might have contributed to minimise Phytophthora disease incidence in SCM and HCM plots. Pepper fruit yield increased with manure amendment in SCM and HCM, which averaged 4.6 and 4.3 kg m⁻², respectively. Further research will be necessary to guarantee an effective Phytophthora biodisinfestation by fitting manure N and organic matter applications, improving crop yield and reducing greenhouse gas pollution.     

Emissions of ammonia,nitrous oxide and carbon dioxide from urban gardens in Niamey,Niger

Urban and peri-urban agriculture (UPA) contributes significantly to meet increasing food demands of the rapidly growing urban population in West Africa. The intensive vegetable cultivation in UPA gardens with its high nutrient inputs is often reported to operate at large surpluses of nutrients and presumably high turnover rates of organic matter (OM) and nitrogen (N) losses via emanation and leaching. Many of these claims are lacking solid data which would allow suggesting mitigation strategies. Therefore, this study aimed at quantifying gaseous emissions of ammonia (NH₃), nitrous oxide (N₂O), and carbon dioxide (CO₂) in three representative urban gardens of Niamey, Niger using a closed chamber gas monitoring system. Mean annual N emissions (NH₃-N and N₂O-N) in two gardens using river water for irrigation reached 53 and 48 kg N ha^?1 yr^?1, respectively, while 25 and 20 Mg C ha^?1 yr^?1 was lost as CO₂-C. In the garden irrigated with sewage water from the city's main wadi, N₂O was the main contributor to N losses (68%) which together with NH₃ reached 92 kg N ha^?1 yr^?1, while CO₂-C emissions amounted to 26 Mg ha^?1 yr^?1. Our data indicate that 28% of the total gaseous C emissions and 30–40% of the N emissions occur during the hot dry season from March to May and another 20–25% and 10–20% during the early rainy season from June to July. Especially during these periods more effective nutrient management strategies in UPA vegetable gardens should be applied to increase the nutrient use efficiency in UPA vegetable gardens.     

Growth and carbon economy of nodulated white clover in the presence and absence of combined nitrogen

An investigation of the carbon economy of single S184 white clover plants nodulated with an effective strain of Rhizobium trifolii growing on N-free nutrient solution and supplied with 150 parts/10⁶ N as NH₄NO₃ has shown that 10% more of the C fixed per day is available for growth in the plants supplied with combined N. The difference between the two groups of plants is a result of higher respiratory activity in the roots of plants growing exclusively on N₂. In terms of shoot growth, however, the difference in growth rate is likely to be less than 10%, because the rate of root growth is greater in the plants supplied with a moderate level of combined N. There is no evidence that NO^-₃ and CO₂ compete for photosynthetically produced reductant in the leaves of plants grown on N₂+NH₄NO₃, since no reduction in net photosynthesis was observed in plants assimilating combined N. An experiment carried out on detached leaflets of white clover grown on N₂ and on N₂+ NH₄NO₃ has shown that NO^-₃ -reducing activity is present in the leaflets of plants grown on N₂+ NH₄NO₃ but not in plants grown on N₂ and that the activity is light-dependent. Measurements of ¹⁴CO₂ respired in the light and dark by leaflets previously allowed to photosynthesize ¹⁴CO₂ showed that the ratio of ¹⁴CO₂ output in the light to ¹⁴CO₂ output in the dark was no higher in plants grown on N₂+ NH₄NO₃ than in plants grown on N₂. This observation is consistent with the finding that N source does not affect net photosynthesis in whole plants.     

Preparation and UV-protective property of PVAc/ZnO and PVAc/TiO<Subscript>2</Subscript> microcapsules/poly(lactic acid) nanocomposites

The poly(vinyl acetate) (PVAc)/zinc oxide (ZnO) microcapsule and PVAc/titanium dioxide (TiO₂) microcapsule were synthesized via in-situ emulsion polymerization method. The PVAc/ZnO microcapsule and PVAc/TiO₂ microcapsule were characterized by fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis(TG), transmission electron microscopy (TEM), and UV-visible spectroscopy (UV-vis). Effect of PVAc/ZnO microcapsule and PVAc/TiO₂ microcapsule on properties of poly(lactic acid) (PLA) was evaluated by UV-vis, SEM and mechanical properties test. The results showed that the addition of PVAc/ZnO and PVAc/TiO₂ microcapsules as a UV-blocking additive could significantly enhance UV-blocking property of PLA/PVAc/ZnO microcapsule composites and PLA/PVAc/TiO₂ microcapsule composites compared with pure PLA, PLA/ZnO composites and PLA/TiO₂ composites. The mechanical properties of PLA/PVAc/ZnO microcapsule composites were better than those of PLA/ZnO composites due to good dispersability and compatibility of PVAc/ZnO microcapsule in PLA matrix. Also, the mechanical properties of PLA/PVAc/TiO₂ microcapsule composites were better than those of pure PLA and PLA/TiO₂ composites. This study demonstrates the great potentials of the intrinsically UV shield additive PVAc/ZnO and PVAc/TiO₂ microcapsules in the application of high performance matrix resin and composite material.     

氮素形态配比对玉米氮素积累及转运的影响

通过田间试验,研究6种(N_1~N_6)硝态氮与铵态氮配比处理对旱地全膜双垄沟播玉米植株氮素积累、转运、氮素利用及子粒产量的影响。结果表明,单施硝态氮时玉米的养分吸收、氮素利用及产量均最低。N6(硝态氮与铵态氮3∶1配比)处理下玉米全生育期氮素积累量最高,氮素吸收强度较单施硝态氮处理高55.19%~73.28%(P0.05),该处理下叶片和茎中氮素转移量较单施硝态氮处理高78.99%和93.52%(P0.05);叶片和茎中分别有66.50%~71.89%和43.44%~55.59%的氮素转移到子粒中;叶片和茎对子粒的氮素贡献率分别较单施硝态氮处理高43.80%和56.00%(P0.05);玉米子粒产量、氮素吸收效率及氮肥偏生产力较其他处理显著增加3.31%~9.94%、4.62%~33.89%和3.31%~9.93%。硝态氮和铵态氮配施对玉米的养分吸收有明显的促进作用,提高硝态氮的施用比例有利于提高玉米叶片和茎对子粒氮素的贡献率,硝态氮与铵态氮按3∶1比例配施有利于提高当地玉米子粒产量。     

The simultaneous introduction of low and high molecular weight of biodegradable Poly(diethylene glycol adipate)s to Plasticize and Toughen Polylactide

Plasticization and toughness of polylactide (PLA) are of interesting due to its poor machinability and brittleness. Here, low and high macromolecular weight of Poly(diethylene glycol adipate)s (L-PDEGA and H-PDEGA) were used to plasticize and toughen PLA simultaneously. The results showed that the mechanical properties of PLA remained almost unchanged when only 5 wt% L-PDEGA was added. However, H-PDEGA were effective in lowering the glass transition temperatures as well as in increasing the elongation at break and the impact strength. Compared with neat PLA, the crystallinity of PLA increased with increasing H-PDEGA content. When 20 wt% H-PDEGA was added, the impact strength and the elongation at break increased from 3.1 kJ/m² and 5.6 % of neat PLA to 68.3 kJ/m² to 272.4 %, respectively. Additionally, morphological study revealed that the fracture behavior of PLA had been changed from brittle to ductile after H-PDEGA incorporated. The results of rheological analysis showed that the storage modulus and complex viscosity in the melt state of the blends were decreased compared with that of neat PLA.     

Antimicrobial and cellular activity of poly(L-lactide)/chitosan/Imipenem antibiotic composite nanofibers

Synthesis of biocompatible polymer nanofibers is valuable, due to their use as a cover for burns and as a replacement for bandage because of their antimicrobial properties. In this study, electrospinning of chitosan(Ch) and nanofibers synthesis with antibacterial properties was investigated. Nanofibers with antibacterial properties were synthesized by electrospun of Ch/poly(L-lactide)(PLA)/Imipenem(Imi) polymer solution. The results showed that the optimized ratio of Ch/PLA polymer solution was ratio of 50:50 and Ch 2 wt% and PLA 10 wt% polymer solution was the best weight percentage for nanofiber preparation. Also, the average diameter of Ch/PLA/Imi nanofibers was 143 nm and measured with ImageJ software. Afterwards, the antibacterial properties of Imi as additives (with different percentages) was studied in the polymer solution. The scanning electron microscopy (SEM) images and antibacterial tests were showed that the electrospun of Ch/PLA/Imi polymeric nanofibers were effective against Gram negative bacteria Escherichia coli (E. coli) and inhibited growth of E. coli. The growth and viability percentage of fibroblast cells with nanofibers in αMEM culture are at desirable levels after 6 days.     

Quality and microbial characteristics of part-baked Sangak bread packaged in modified atmosphere during storage

The effect of part-baking and modified atmosphere packaging (MAP) on quality and microbial stability of part-baked flat bread (Sangak) was investigated. Part-baked Sangak bread was packaged in 100% CO₂, 50% CO₂:50% N₂, 25% CO₂:75% N₂ and air as a control and stored at 25 °C for 21 days. Color, firmness, moisture, density and microbiological analyses of the package breads were carried out at 3-day intervals during storage. No significant effect of MAP was found on moisture, color and texture during the storage of part-baked bread, while the total aerobic plate count (APC) and the mold and yeast count (M + Y) were dependent on the concentration of CO₂ in the package headspace. With increasing concentration of CO₂, microbial counts were decreased. Density of part-baked bread was also somewhat influenced by the MAP. The observed reduction in the density of control samples during storage was less than those in MAP. The results of the present study demonstrated that it is possible to prolong the shelf-life of Sangak bread from a few days to about 21 days by using bake-off technology (BOT) and MAP under high CO₂ concentration.