Evaluating antistatic performance of plasma-treated polyester

Use of low temperature plasma treatment has been attempted in the textile industry and there the has been some success in the dyeing and finishing processes. In this paper, an attempt was made to apply low temperature plasma treatment to improve the antistatic property of polyester fabric. The polyester fabrics were treated under different conditions with low temperature plasma. An orthogonal array testing strategy was employed for obtaining the optimum treatment condition. After low temperature plasma treatment, the polyester fabrics were evaluated with different characterization methods. Under the observation of scanning electron microscope, the surface structure of the polyester fabric treated by low temperature plasma was found to be seriously altered which provided more capacity for polyester to capture moisture and hence increased the static charges dissipation. The relationship between moisture content and half-life decay time for static charges was studied and the results showed that the increase in moisture content would result in shortening of the time for static charges dissipation. Moreover, the antistatic property of the low temperature plasma treated polyester fabric was greatly improved. In addition, the antistatic property of the polyester fabric treated by low temperature plasma was compared with that of the polyester fabric treated with a commercial antistatic finishing agent.     

Organic solvent absorption characteristics of split-type microfiber fabrics

Split-type nylon/polyester microfiber and polyester microfiber fabrics possess drapeability, softness, bulkiness, and smoothness, so that they can be applied in various industrial fields. In particular, these fabrics are able to absorb various organic solvents, and can be used as clean room materials. To investigate the chemical affinity between solvents and the compositional materials of these fabrics, the contact angle of thermally pressed film fabrics was measured with different solvents. The thermally pressed nylon/polyester fabric films showed a chemical attraction to formamide. The sorption properties of the microfiber fabrics were investigated using a real time testing device, and these tests showed that the sorption behavior was more influenced by the structure of the fibrous assembly than by any chemical attraction. The effect of the fabric density, specific weight, and sample structure on the sorption capacity and rate was examined for various organic solvents. The sorption capacity was influenced by the density and the specific weight of the fibrous assembly, and knitted fabric showed a higher sorption capacity than woven fabric. However, the sorption rate was less affected in lower viscosity solvents. On applying Poiseuille’s Law, the lower viscosity solvents showed higher initial sorption rates, and more easily penetrated into the fibrous assembly.     

Application of electrospun polyurethane web to breathable water-proof fabrics

Electrospun web may possibly be widely applied to protective garments or specialty textiles due to its high level of protection as well as comfort. Of particular interest in this study is to develop waterproof-breathable fabric by applying electrospun web of polyurethane directly onto the substrate fabric. The optimal electrospinning condition was examined with regards to the concentration, applied voltage and tip-to-collector distance. Solvent-electospinning of polyurethane was performed at the optimum condition, using N,N-dimethylacetamide as solvent. The thickness of 0.02 mm of electrospun web was applied onto the polyester/nylon blended fabric. For comparison, the polyester/nylon fabrics were coated with 0.02 mm thickness of polyurethane resin membranes adopting four different conditions. The electrospun PU web/fabric was compared to resin coated fabrics in terms of water-proof and breathable properties. The electrospun web applied fabric showed higher air permeability, vapor transmission, and thermal insulation properties than resin coated fabrics, which can be translated as greater comfort sensation of electrospun applied fabrics. However, water resistance value of electrospun web applied fabric did not reach that of resin coated fabrics.     

The effect of fabric balance and fabric cover on surface roughness of polyester fabrics

The effects of fabric balance and fabric cover on surface roughness values of textured polyester woven fabrics with different constructional parameters were investigated. The warp yarn properties (type, count and warp density) were kept constant while the effect of variation in weft yarn density and weave pattern were studied. Measurements were conducted on pre-treated white fabric samples and the results assessed in relation to their constructional properties. A general overview of the results showed that surface roughness values of polyester fabrics affected by fabric balance and fabric cover and the effects were related to fabric thickness, yarn densities, yarn crimp, positioning of yarns in fabric structure. A change in weave pattern from sateen to plain increased the fabric balance and fabric cover, but decreased the surface roughness. Similarly, an increase in weft density increased the fabric balance and fabric cover, but decreased surface roughness. In order to produce fabrics with smooth surface properties yarn density should be increased, yarn float lengths decreased, cover of fabrics increased and fabric balance improved.     

Tunable functional properties on polyester fabric using simultaneous green reduction of graphene oxide and silver nitrate

Here, a novel method is introduced to create tunable properties on the polyester fabric through diverse chemical modifications. The polyester fabric was primarily modified with NaOH or ethylenediamine to enhance the surface activity. This will produce diverse chemical groups on the polyester fabric surface including carboxylate, hydroxyl and amine groups. The fabric was treated with grahene oxide through exhaustion method. The silver nitrate was then added and simultaneously reduced with grapheme oxide using ascorbic acid and ammonia to produce reduced graphen oxide/silver nanocomposites (rGO/Ag) on the fabric surface. The synthesized nanocomposites were characterized by TEM and Raman spectra. The presence and uniform distribution of the nanocomposites on the fabric surface was also confirmed by SEM images and EDX patterns. The electrical resistivity was varied on the raw and modified polyester fabric due to the diverse formation of the graphene nanosheets network on the fabric surface. More Ag particles were formed on the surface of the alkali hydrolyzed polyester whereas more graphene nanosheets deposited on the aminolyzed polyester fabric. Also the hydrolyzed polyester fabric exhibited higher antibacterial properties with the lowest silver nitrate in the processing solution. The aminolyzed fabric showed a lower electrical resistance than the hydrolyzed and raw fabrics with the same amount of GO in the procedure bath. The aminolyzed polyester fabric indicated higher affinity towards GO produced higher antibacterial properties before reduction and without silver nitrate however lower electrical resistance obtained after reduction comparing with other samples.     

Simulation of the weave structural design of synthetic woven fabrics

This study surveys the basic procedure of data base system of the fabric structural design which can be linked with existing pattern design and garment design CAD systems. For this purpose, the theoretical and empirical equations related to the fabric structural design are analyzed and discussed with various fabric specimens. The fabric structural parameters such as weave density coefficient, cover factor and yarn density coefficient of various kinds of fabrics are calculated using the empirical equations. These calculated fabric structural parameters of many kinds of polyester and nylon fabrics are compared and discussed with weave pattern, and materials such as polyester and nylon. Furthermore the difference between fabric structural parameters calculated by empirical equations are analyzed with polyester and nylon fabrics as a basic study for data base system of the fabric structural design. Finally, the weave density coefficients of polyester and nylon fabrics were analysed and discussed with shrinkages of dyeing and finishing processes, and also surveyed according to the weaving company and weave structural parameters such as weave pattern and denier.     

Preparation and Properties of Antistatic Polyethylene Film Coated Polypropylene Non-woven Fabrics

In this paper, antistatic PE/PP coated non-woven fabrics were prepared by the coating process of the antistatic finished PE films and PP non-woven fabrics using the heat pressing process of the hot melt adhesives. The antistatic finishing of polyethylene (PE) films and polypropylene (PP) non-woven fabrics were processed by one face foam finishing and dip-pad finishing process, respectively. The antistatic properties of PE/PP coated non-woven fabrics which were influenced by the antistatic finishing processes and the thickness of PE films were investigated. The static charges transmission mechanism of these coated non-woven fabrics was illustrated. The results revealed that the static charges were transferred and dissipated by forming the continuous conductive path and network between the film-adhesive and adhesive-fabric due to the hot melt adhesion and squeezing of the antistatic agents existing inside of of the non-woven fabrics matrix and on the film surface. The antistatic properties of coated non-woven fabrics were improved with the increasing of the antistatic agent concentration on the finishing solution. And the antistatic properties of PE films were greatly influenced by the film thickness, the thinner of PE films the much more obvious improvement of the film surface antistatic properties. The finishing process wouldn’t reduce the peeling strength of the coated non-woven fabrics. The antistatic properties of the PE/PP coated non-woven fabrics possessed high washing durability due to the crosslinking fixation effect of the hot melt adhesives which wouldn’t be weakened after several times washing.     

Effect of drying condition on the electrostatic characteristics of the laundry

This paper suggests the optimal conditions to prevent electrostatic charge in the laundry by the evaluation of the electrostatic characteristics during the drying process. Cotton, nylon, and polyester fabrics were used as test specimens, employing the standard washing cycle. The electrostatic characteristics of the laundry were measured after the automatic drying process. This paper investigates the optimal conditions for preventing electrostatic charges in laundry by evaluating the electrostatic characteristics that occur during the drying process. Cotton, nylon, and polyester fabrics were used as the test specimens, employing a standard washing cycle. The electrostatic characteristics of the laundry were measured immediately after the automatic drying process. The results, showed that the moisture content decreased and the electrostatic charge increased with drying time. The specimen fabrics had already dried up before completion of the standard drying cycle. Consequently, the excessive drying generated an electrostatic charge due to removal of the traces of remaining moisture and the resulting excessive friction. For cotton fabrics, the electrostatic charge was under 1000 V even for the maximum drying time due to the intrinsic high moisture regain of cotton. On the other hand, the electrostatic charge produced for nylon fabrics increased rapidly with the drying time, and amounted up to approximately 8000V after 120 minutes. The results also indicated that the electrostatic charge could be decreased by drying fabrics of only one kind. When mixed kinds of fabrics were dried, the electrostatic charge increased remarkably. Therefore, it is suggested that laundry be classified and washed according to the kinds of fiber, and not be dried excessively to reduce electrostatic charge. In addition, the proper use of a softener is effective in reducing the electrostatic charge.     

Simultaneous synthesis of nano ZnO and surface modification of polyester fabric

In this study, synthesis of zinc oxide nanoparticles was carried out along with the hydrolysis of polyester fabric using sodium hydroxide to increase the surface activity and enhance the nanoparticles adsorption. The polyester fabrics were treated with zinc acetate and sodium hydroxide at different bath conditions, ultrasound and stirrer, resulting in formation of ZnO nanospheres and ZnO nanorods. The presence of zinc oxide with different shapes on the surface of the polyester fabrics was confirmed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Also, the X-ray diffraction patterns established the composition of wurtzite structure of zinc oxide. The self-cleaning property of treated polyester fabrics was evaluated through discoloring dye stain under sunlight irradiation. The antibacterial activities of the samples against two common pathogenic bacteria including Escherichia coli and Staphylococcus aureus were also assessed. The results indicated that the photocatalytic and antibacterial activities of the ultrasound treated polyester fabrics were superior compared to the stirrer treated samples.     

The eco-friendly surface modification of textiles for deep digital textile printing by in-line atmospheric non-thermal plasma treatment

This study evaluated the potential application of an atmospheric plasma (AP) treatment as a pre-treatment for digital textile printing (DTP) of polyester (PET) fabrics and cotton, in order to determine its viability as an alternative to the usual chemical treatment. The surface properties of the AP-treated fabrics were examined through scanning electron microscopy (SEM) and contact angle, and the physical properties, such as electrostatic voltage and water absorbance, were tested. The properties of cotton and PET with the AP treatment were found to be dependent on number of repetitions and electric voltage. Although no remarkable surface differences were observed by SEM in the fabrics before and after treatment, the static contact angle of the PET after AP treatment was decreased from 85 ° to 24 ° at wave. In addition, the charge decay time decreased as the voltage and number of treatments increased. The absorption height of PET changed after exposure to 7 mm with increasing measurement time. The K/S with and without the AP pre-treated and DTP finished cotton was better than that with the usual chemical modification. In PET, the 0.5 kW and 1 time AP-treated specimen showed the highest K/S values.     

Effect of wool surface modification on fluorocarbon chain re-orientation

There is an increasing demand for air-dry performance of fluorocarbon finished materials. Thus, surface modifications of wool fabrics were evaluated. Untreated, gaseous fluorinated, Chlorine/Hercosett processed 100 % wool fabrics were treated with different fluorochemicals and their liquid repellency after washing, and dry cleaning were evaluated. The results indicated that Chlorine-Hercosett treated samples, wool with a positive charge, after few washing cycles, showed better air dry performance with higher level of repellent properties. In addition, the comparison of the wool surface modifications treatment with different applied fluorochemicals, with different commercial formulations, illustrated that the fluorocarbon chain re-orientation and fastness properties are more affected by the nature of the wool surface while the used fluorocarbons showed more or less similar behaviours. In general, the fluorination increases fabric stiffness with lower fabric formability. The surface interface was effectively probed by X-ray Photoelectron Spectroscopy, XPS, which enabled the characterisation of the loss of surface lipids, the nature of the fibre oxidation and the deposition of fluoropolymers.     

Functional modification of wool fabric by thiol-epoxy click chemistry

The paper reports modification and characterization of wool fabrics achieved through thiol-epoxy click chemistry. A pretreatment with tris (2-carboxyethyl) phosphine (TCEP) as an effective reducing agent was carried out to produce thiol groups on wool surface. Glycidyl trimethyl ammonium chloride (GTAC) was later covalently bonded with wool fibers via thiol-epoxy reaction. The reaction was confirmed by SEM, FTIR, Raman and TG analysis. Antibacterial activity, antistatic property, hydrophilicity and dyeability of treated wool fabric were assessed. The results demonstrated that TCEP-GTAC treatment can endow wool fabric good antibacterial and antistatic properties as well as improved hydrophilicity. Tensile strength studies indicated fiber strength loss of ~12 % on modification.     

The influence of corona discharge treatment on the properties of cotton and polyester-cotton knitted fabrics

In this study, the effect of corona discharge treatment on the physical and mechanical properties of bleached cotton and polyester-cotton fabrics were investigated. For this purpose, the samples were treated by corona discharge at two levels of voltage 5 and 10 kV, and at various duration times of plasma, ca. 1.4, 2.1 and 3.5 min. The corona discharge treatment was applied on the fabric samples before and after bleaching treatment. The results show that the corona influences on the surface morphology, breaking strength, air permeability, abrasion resistance, and pilling of cotton and polyester-cotton fabrics. Moreover, the levels of voltage and duration of plasma have a different effect on the properties of fabrics.     

Evaluation of the structural properties of plain fabrics woven from various fibers using Peirce’s model

Peirce’s fabric model has been widely used to predict the structural behavior of various plain woven fabrics. The structure of plain woven fabric can be defined in terms of the warp yarn number, weft yarn number, warp fabric density, weft fabric density, warp crimp, and weft crimp. The warp and weft yarn diameters are calculated from the warp and weft yarn numbers, and the effective coefficient of the yarn diameter is defined by using this model. We have investigated structural properties, such as the effective coefficient of the yarn diameter, yarn crimp, and fabric thickness for two different fabrics in which the constituent yarns are assumed to be either incompressible or compressible. This model is also applied to various plain fabrics woven from cotton, rayon, wool, linen, nylon, acetate, polyester, and silk yarns.     

A novel method to analyze the moisture liberation of textile fabrics

In this paper, a purpose-built apparatus was used to analyze the moisture liberation of textile fabrics. Fabrics were wetted and placed in an air-conditioned room to test the variation of weight and surface temperature during the process of moisture liberation. Effects of textile materials and fabric structures on the velocities of moisture liberation of fabrics were analyzed; the temperature variation and its relationship with moisture regains of fabrics in the moisture liberation were also studied. Moisture liberation velocities of polyester and silk fabrics are much higher than that of wool and cotton fabrics. For the same textile materials, knitted fabrics absorbed more water and thus took longer time to liberate the water. The surface temperature of fabrics showed three stages during moisture liberation. With the decrease of moisture regain, fabric temperature decreased gradually and jumped quickly to ambient temperature. In this way we could evaluate the moisture desorption of fabrics and develop quick-drying fabrics with imporved moisture and thermal properties.     

Parametric study of CF4-plasma on the hydrophobicity of polyester synthetic leather

Atmospheric pressure plasma (APP) technology has been proven to be an effective method for improving the hydrophobicity of fabric surface. While many researchers have worked on apparel fabrics, polyester and synthetic leather fabrics, popular in the luxury textile market, have been examined rarely. In this regard, this paper reports the effects of APP treatment using tetrafluoromethane (CF₄) as the polymerizing monomer on hydrophobicity of polyester synthetic leather. The polyester synthetic leather samples were treated under various parameters and hydrophobicity was found to be greatly enhanced under a certain range of treatment conditions. An optimization of the treatment parameters was conducted and the results showed that a hydrophobic surface with a contact angle of 106 ° was achieved, compared to the untreated sample’s 0 °.     

黄麻／棉织物服用性能探讨

本文通过试验测定了黄麻／棉织物的服用性能，并与苎麻／棉，涤／棉，纯棉等织物的服用性能进行比较，结论表明黄麻／棉织物作为服用织物是可行的。     

Pull-out properties of polyester woven fabrics: Effects of softening agent and interlacement on single and multiple yarn pull-out forces and analysis by statistical model

The aim of this study was to understand the effects of softening treatment on pull-out properties of plain, ribs and satin fabrics. Polyester woven fabrics were used to conduct the pull-out tests. Data generated from these tests included pullout force, crimp extension and fabric displacement. A developed yarn pull-out fixture was used to perform single and multiple pull-out tests on treated and untreated polyester fabrics. Yarn pull-out forces depend on fabric treatments, fabric density, fabric weave, and the number of pulled ends in the fabric. The results of regression model showed that multiple and single yarn pull-out forces of treated fabrics were lower than those of untreated fabrics. The multiple yarn pull-out force was higher than that of the single yarn pull-out force, and that dense fabric had a high pull-out force. Treated and untreated plain fabrics had high single and multiple pull-out forces compared to those of treated and untreated ribs and satin fabrics. Yarn crimp extension depends on directional crimp ratios in the fabric and the number of pulled yarn ends. High directional crimp ratio fabric showed high directional yarn crimp extension. Fabric displacement depends on the number of pulled yarn ends and also fabric treatments. Fabric displacement in multiple pull-out tests showed high fabric displacement compared to that of single pull-out tests. On the other hand, the regression model could be used in this study as a viable and reliable tool.     

Sound absorption and viscoelastic property of acoustical automotive nonwovens and their plasma treatment

Sound absorption property, viscoelastic property and the effect of plasma treatment of four automotive nonwoven fabrics on these properties are discussed in this research paper. Needle-punched fabrics used for vehicle headliner include 2 polyester fabrics made of hollow polyester fibers or solid polyester fibers, and 2 polypropylene-composite cellulose fabrics made of jute fibers or kenaf fibers, manufactured with the same web structure of apparent fabric density and fabric thickness. Hollow polyester fiber fabric has the highest sound absorption and the highest loss factor, the second highest is jute fiber fabric. The viscoelastic property is found to be related to the sound absorption property of fabric. The plasma treatment on nonwoven fabrics changes their sound absorption and viscoelastic property as well as their fabric weight and pore size. Hollow polyester fabric shows the increased sound absorption and viscoelastic property after the treatment with the increased pore sizes, while regular polyester fabric displays insignificant changes. The cellulose fabrics are more affected by plasma treatment compared to the polyester fabrics in terms of fabric weight loss and pore size, and jute fabric is more affected than kenaf fabric due to fiber weakness. The jute fabric demonstrates the decreased sound absorption and viscoelastic property, while kenaf fabric shows the increased sound absorption with the unchanged viscoelastic property after the treatment.     

Analysis and off-axis tensile characterization of air-entangled textured polyester woven fabrics depending on unit cell interlacing frequency

The aim of this study is to analyze and determine the off-axis tensile properties of air-entangled textured polyester fabrics based on unit cell interlacing frequency. For this purpose, continuous filament polyester air-entangled textured yarn was used to produce plain, ribs and satin woven fabrics. The fabrics were cut from the warp direction (0°) to weft direction (90°) at every 15° increment, and tensile tests were applied to those of the off-axis samples. The strength and elongation results were introduced to the statistical model developed, and regression analyses were carried out. Hence, the effects of off-axis loading and interlacement on the directional tensile properties of the fabric were investigated. The regression model showed that off-axis loading influences fabric tensile strength. On the other hand, interlacement frequency is the most important factor for fabric tensile elongation. The results from the regression model were compared with the measured values. This study confirmed that the method used in this study as can be a viable and reliable tool. Future research will concentrate on multiaxially directional fabric and the probability that it will result in homogeneous in-plane fabric properties.