Influence of pH and Zinc Concentration on Cadmium Sorption in Acid, Sandy Soils

Batch adsorption experiments were carried out with samples from an A-, Bh- and C-horizon of contaminated sandy soil of podzolic character from the Kempen region at the Dutch-Belgian border. Cadmium sorption was studied on 3 soil samples at 3 different pH-levels (3.6, 4.3 and soil buffered pH) and 3 different additions of zinc (0–40 mg l^-1). Adsorption of cadmium by acid sandy soils can be fitted by a Freundlich adsorption isotherm. Although zinc competes with cadmium for the sorption sites, we observe a two to three times stronger competition effect of the proton cation, which is explained by the chemical properties of both ions. The cadmium adsorption coefficient K_F decreases considerably by an increase of the proton activity used in the sorption experiments. Organic matter content explains for a large part the variation of KF of te three soil samples. Desorption data do not fit the proposed regression model for adssorption. Not all the cadmium, intitially present in the polluted soil, will fylly desorb reversibly. Thus, part of the cadmium may be irreversible bound.     

Zinc adsorption characteristics of selected calcareous soils of Iran and their relationship with soil properties

Abstract

The apparent recovery of applied zinc (Zn) by plants is very low in calcareous soils of Iran because most of it is retained by the soil solids. Subsamples of 24 surface soil (clay 130–530 g kg^‐1; pH 7.7–8.4; electrical conductivity 0.63–3.10 dS m^‐1; organic matter 6.0–22.0 g kg^‐1; cation exchange capacity 8–20 cmol kg^‐1; calcium carbonate (CaCO₃) equivalent 180–460 g kg^‐1) representing 13 soil series in three taxonomic orders were equilibrated with zinc sulphate (ZnSO₄) solutions and the amount of Zn disappeared from solution after a 24‐h shaking period was taken as that adsorbed (retained) by the soil solids. The adsorption data were fitted to Freundlich (X=AC^B) and Langmuir [X=(K‐bC)/(1+K#lbC)] adsorption isotherms. Backward stepwiseprocedure was used to obtain regression equations with isotherms coefficients as dependent and soil properties as independent variables. Freundlich A and Langmuir K were found to be highly significantly related to pH and clay and increasing as these soil properties increased. But Langmuir b was related only to clay and Freundlich B showed no significant relationship with any of the properties studied. The distribution coefficient (also called maximum buffering capacity), calculated as the product of Langmuir K and b, was also found to be highly significantly related to pH and clay. It is concluded that pH and clay content of calcareous soils are the most influential soil properties in retention of Zn.     

Adsorption of atrazine and metolachlor in three soils from Blue Creek wetlands, Waterville, Ohio

Atrazine and metolachlor are extensively used pesticides in agricultural activities in northwest Ohio. Adsorption coefficients are often used to model pesticide fate and transport. Many physical-chemical parameters, such as organic matter, clay content, pH, and ionic strength, affect pesticide adsorption. Adsorption kinetics and adsorption isotherms were studied by batch experiment. Effects of humic acid, solution pH, and ionic strength on atrazine and metolachlor adsorption were also approached. After 24 h, both atrazine and metolachlor reached adsorption equilibrium in three local soils. Adsorption isotherms were described by Freundlich equations. The Freundlich coefficient (Kf) ranged from 0.14 to 4.47 (L kg^–1) for atrazine, and 0.04 to 5.30 (L kg^–1) for metolachlor. Adsorption capacity decreased in the order Sloan loam > Del Rey loam > Ottokee fine sand. Koc values varied considerably for both pesticides: metolachlor > in Sloan loam, atrazine metolachlor in Del Rey loam, and atrazine > metolachlor in Ottokee fine sand. In addition to organic matter content, clay played a key role in adsorption in the Del Rey loam and Ottokee fine sand. Higher adsorption was observed at pH 5 for both pesticides. As pH decreased to 3 and increased to 11, adsorption decreased. Adsorption increased as ionic strength increased.     

Adsorption-desorption of atrazine on four soils of Hyderabad

The adsorption-desorption equilibrium of atrazine (2-chloro, 4-ethylamino, 6-isopropyl amino-1, 3, 5 triazine) was studied by the batch equilibration method at 27 ± 1 °C on four soils of Hyderabad. Adsorption isotherms conformed to the Freundlich equation (A = KC^1/n ). K increased in the same order as the organic C content of the soils. Desorption studies were conducted by repeated replacement of 5 mL of the supernatant equilibrium solutions after adsorption, with 0.01 M CaCl₂. Desorption isotherms showed considerable hysteresis which was more prominent when the desorption was carried out with higher adsorbed concentration of atrazine. Desorption from the lowest level of adsorbed atrazine (3 to 5 μg g^?1 soil) was close to the adsorption isotherm. The cumulative desorption after four desorption steps covering five days was significantly different at the 1% level, for different initial adsorbed concentrations of atrazine. Desorption was significantly higher at the lowest adsorbed level of atrazine. The soils differed significantly at 6% level for desorption and the amount desorbed decreased in the inverse order of organic C. Desorption isotherms also conformed to Freundlich equation but K andn values were both higher than that for adsorption and increased with increase in initially adsorbed concentration of atrazine. Desorption thus confirmed the irreversible nature of the adsorption of atrazine on these soils. The quantitative factors and reasons for desorption are discussed.     

Zinc Adsorption by Mineral Soils of Finland

Abstract

Zinc adsorption by 10 (pH 4.0–6.5) cultivated mineral soils from Finland was studied in batch experiments. Additions of Zn ranged up to 600 mg kg^?1 of soil and the corresponding equilibrium concentrations were 0.1–13 mg 1^?1. In each soil, Zn adsorption conformed to the Freundlich isotherm. Despite a relatively low initial Zn adsorption by the acidic soils, each of the soils proved to have a high potential to adsorb Zn, but the capacity was highly pH dependent. In addition to the conventional Freundlich adsorption isotherms, calculated separately for each soil, extended Freundlich-type isotherms that also incorporate soil pH and other soil characteristics were used to describe Zn adsorption of several soils simultaneously in one equation. The pH-dependent Freundlich adsorption isotherm proved to serve as a practical tool to assess Zn adsorption by soils varying in pH and other characteristics.     

除草剂咪草烟在土壤上吸附-脱附过程及作用机理

本文研究了咪唑啉酮类除草剂咪草烟在不同土壤固－液相间的分配及与土壤组分作用的定量相关性。结论指出：咪草烟在土壤固－液相的分配主要受土壤粘粒,有机质及土壤ｐＨ的影响。它们在土壤上的吸附－脱除均可用Ｆｒｅｕｎｄｌｉｃｈ方程描述;通过运用红外及Ｘ－衍射技术,从分子水平研究了咪草烟与蒙脱石的作用机理,发现咪草烟与蒙脱的作用不仅发生在表面,而且咪草烟还能进入蒙脱石内层与其层间阳离子形成配合物。     

Adsorption of Cadmium and Zinc onto Micaceous Minerals: Effect of Siderophore Desferrioxamine B

The mobility, bioavailability, and environmental fate of heavy metals in soil are controlled by their adsorption onto soil minerals and solid organic matter. The adsorption is strongly affected by the presence of various low-molecular-weight organic acids. In this study, effect of hydroxamate siderophore desferrioxamine B (DFOB) on cadmium (Cd) and zinc (Zn) adsorption onto two micaceous clay minerals, muscovite and phlogopite, was evaluated in batch experiments. Results showed that the presence of DFOB diminished the adsorption of Cd and Zn onto both minerals, particularly under neutral to alkaline pH conditions. For instance, at pH 8.2, the presence of DFOB caused a decrease in the adsorption of Zn onto phlogopite by nearly 50%. The equilibrium adsorption of Cd and Zn was satisfactorily described using Freundlich isotherm. The adsorption isotherms showed that the affinity of Cd and Zn onto the minerals decreased in the presence of DFOB. For example, at pH 8.0, the presence of siderophore caused a decrease in the Freundlich adsorption isotherm coefficient K_F for Zn adsorption onto muscovite and phlogopite from 4.60 to 0.07 L g^-1 and from 3.56 to 0.36 L g^-1, respectively. These findings confirm the potential influence of siderophore on the fate of Cd and Zn in arid soils containing substantial contributions of micaceous silicate minerals.     

Adsorption of mercury compounds by tropical soils III. Adsorption isotherms

Isotherms for sorption of 2-methoxyethylmercury chloride (Aretan) and HgCl₂ showed that all three soils investigated had a large capacity to adsorb these Hg compounds, the order being Morogoro > Arusha > Dar es Salaam. For all soils, surface horizons adsorbed more Hg at any given concentration of Hg in solution as compared to subsurface horizons. Adsorption isotherms of Aretan, especially at lower equilibrium concentration in soil solution, were much steeper in all horizons and in all profiles. The Freundlich equation described the adsorption of HgCl₂ better than that of Aretan. The adsorption isotherms for Aretan and HgCl₂ showed different forms, implying probably that different adsorption mechanisms were involved.     

Equilibrium adsorption of isoproturon on soil and pure clays

The adsorption of isoproturon on soil and pure clay minerals has been investigated as a means of understanding its mobility in soils. Measured adsorption coefficients are correlated with soil and clay mineral properties. Soil organic matter controlled the adsorption of isoproturon at organic carbon contents exceeding 27 g kg^?1, whereas at less than this threshold, clay mineral surfaces appeared to control adsorption. The effect of varying temperature suggests that adsorption of isoproturon is a physical process. From the comparison of the fits of linear, Freundlich, and Langmuir adsorption isotherms to the data, the adsorption is best described as a partition process.     

Adsorption and desorption of dimepiperate by soils

The adsorption and desorption of dimepiperate, S-(,-dimethylbenzyl)-1-piperidinecarbothioate, on three soils of various physical and chemical properties was studied. Adsorption isotherms conformed to Freundlich equation. The k _f values increased with increasing organic carbon content of the soils. To confirm the effect of organic matter, the adsorption of the herbicide was studied after removal of organic matter by peroxidation. This soil treatment caused a sequential loss of adsorptive capacity. Desorption isotherms also conformed to Freundlich equation, but K _des values were higher than those for adsorption and increased with increase in concentration of initially adsorbed dimepiperate. Hysteresis was indicated by the decrease in slope of desorption compared to adsorption isotherms. Hysteresis decreased with increasing methanol content in the extracting solution. The factors involved are discussed.     

胶体存在时不同质地土壤对锌镉的吸附试验研究

以重金属离子Zn和Cd及胶体为对象,通过等温静态批量平衡吸附试验,分析了3种不同质地土壤对Zn、Cd单一吸附和等量竞争吸附特征,胶体对土壤吸附Zn、Cd的影响,并用Langmuir和Freundlich方程对试验结果进行了拟合。结果表明,随着平衡液中Zn2+、Cd2+浓度的增加,土壤对Zn、Cd的吸附量逐渐增大;3种质地土壤对Zn、Cd吸附量顺序为砂壤>粉壤>壤砂土;Zn2+、Cd2+共存时,土壤对这两种离子的吸附量比单一离子存在的情况下明显下降;胶体存在时抑制了土壤对Zn的吸附,促进了土壤对Cd的吸附;就本试验来说,Freundlich方程拟合效果优于Langmuir方程。     

Adsorption/Desorption of Organic Anions in Brazilian Oxisols

Abstract

Organic anions affect solute mobility in soils. This study evaluated citrate and oxalate adsorption (0 to 4 mmol L^?1, soil–solution 1∶100, pH 5.5, ionic strength 30 mmol L^?1 as NaCl, 72‐h reaction) and desorption (pH 5.5, 30‐mmol L^?1 NaCl, 72 h) on A‐ and B‐horizon samples of two Brazilian Oxisols. Langmuir and Freundlich isotherms were used to assess adsorption maximum, distribution coefficients (Kf, Ku), and buffer index. Adsorption maximums (mol kg^?1) for red Latossol‐A, red Latosol‐B, red‐yellow Latosol‐A, and red‐yellow Latosol‐B horizons follow: citrate 0.0318, 0.0272, 0.0289, 0.0392; oxalate 0.0641, 0.0329, 0.0538, 0.0380. Kf (mol^1?1/n kg^?1 L^1/n) follows: citrate 0.3550, 0.3781, 0.4211, 0.2024; oxalate 1.0916, 0.0637, 1.8228, 0.0922. Buffer index (mol kg^?1)(mol kg^?1)^?1 follows: citrate 0.0841, 0.0756, 0.0738, 0.0264; oxalate 0.3787, 0.0862, 0.3233, 0.1082. Both anions showed great affinity for variable‐charge soils. The distribution curves for Ku showed higher adsorption energy in B‐ than in A‐horizons.     

STUDIES ON SOIL COPPER

Adsorption isotherms were determined for the specific adsorption of copper by soils and soil constituents. Adsorption was found to conform to the Langmuir equation. The Langmuir constants, a (adsorption maximum) and b (bonding term), were calculated. Soils were found to have specific adsorption maxima at pH 5.5 of between 340 and 5780 μg g^?1, and a multiple regression analysis revealed that organic matter and free manganese oxides were the dominant constituents contributing towards specific adsorption. Adsorption maxima for soil constituents followed the order manganese oxides > organic matter > iron oxides > clay minerals, which supported the findings for whole soils. The cation exchange capacities (non-specific adsorption) of the test soils were found to be far greater than the specific adsorption maxima. However, evidence suggests that, for the relatively small amounts of copper normally present in soils, specific adsorption is the more important process in controlling the concentration of copper in the soil solution.     

ACCUMULATION OF CADMIUM AND ZINC FROM DIFFUSE IMMISSION ON ACID SANDY SOILS,AS A FUNCTION OF SOIL COMPOSITION

Sandy soils, in the border area of Belgium and the Netherlands (the Kempen region), are heavily contaminated by atmospheric deposition of cadmium and zinc from nearby smelters. Groundwater contamination by leaching from these low retention soils is subject of study. There are reports of high cadmium and zinc concentrations in groundwater in the area, but in most cases the direct sources are unknown. In an attempt to predict present or future risk of groundwater contamination by soil leaching, metal binding processes (retardation) were studied that are specific for these soil types under the existing acidifying conditions. From four fields nine contaminated profiles were sampled and analyzed for cadmium and zinc. Average concentrations of 131 μg g^-1 zinc and 1.6 μg g^-1 cadmium with maximum values of 2989 μg g^-1 respectively 16.3 μg g^-1 were found. In addition pH and contents of organic matter, aluminium, iron, and manganese were determined. The relative importance of these soil parameters for metal retardation is derived from the profiles. The data show that organic matter is the most important soil component for binding cadmium and zinc. Adsorption of cadmium and zinc on aluminium, iron and manganese (hydr) oxides appears to be of minor importance at low pH (<5.5).     

Radiation Synthesis of Poly(Acrylamide-Acrylic Acid-Dimethylaminoethyl Methacrylate) Resin and Its Use for Binding of Some Anionic Dyes

Poly(acrylamide-acrylic acid-dimethylaminoethyl methacrylate) P(AAm-AA-DMAEMA) resin was prepared by the template copolymerization. PAAm was used as a template for the copolymerization of DMAEMA and AA in aqueous solution using gamma rays. The adsorption of indigo carmine and eriochrome black-T anionic dyes from aqueous media on P(AAm-AA-DMAEMA) has been investigated. The adsorption behavior of this resin has been studied under different adsorption conditions: dye concentrations (50?C500 mg l^?1), contact times, temperature (30?C55°C), and pH values (2?C7). The amount of dye adsorbed increased with increasing resin content, but it had a little change with temperature and decreased slightly with increasing pH. Adsorption data of the samples were modeled by the pseudo-first-order and pseudo-second-order kinetic equations in order to investigate dye adsorption mechanism. It was found that the adsorption kinetics of the resin followed a pseudo-second-order model with rate constant (k ₂) of 2.5?×?10^?3 and 1.8?×?10^?2 g (mg^?1 min^?1) for indigo carmine and eriochrome black-T, respectively. Equilibrium isotherms were analyzed using the Langmuir and Freundlich isotherms. It was seen that the Freundlich model fits the adsorption data better than the Langmuir model.     

Sorption of phosphate by aluminium and iron(iii)-hydroxy species on mica surfaces

Freshly cleaved mica sheets with aluminium- or iron(III)-hydroxy species on the cationexchange surface were prepared by suitable treatment with AlCl₃ or FeCl₃. These surfaces were considered as model soilk mineral surfaces and their interaction with phosphate studied using techniques previously developed for the study of single planar surfaces.Adsorption isotherms for both the iron(III) and aluminium systems were very similar and could be interpreted as two Freundlich isotherms indicating two different adsorption processes, one operating below a solution concentration of 10^?5 M and thee other above. Results obtained from the continuous monitoring of adsorption indicate that a rearrangement of adsorbed phosphate occurs with time on both the aluminium- and iron(III)hydroxy surfaces. This rearrangement reduces the rate of desorption and could be a cause of phosphate fixation in soils.     

Evaluation of Adsorption Isotherm Models for Potassium Adsorption under Different Soil Types in Wolaita of Southern Ethiopia

Adsorption isotherm is essential for predicting its mechanisms, which are important for potassium (K) fertilizer application and to recommendation appropriate rates for acidic soils. Thus, the objective of this study was to evaluate K adsorption characteristic of the selected soils by comparing different adsorption models with soil properties of the soil in different districts (Sodo Zurie, Damot Gale, Damot Sore and Boloso Sore) in the Wolaita Zone of Southern Ethiopia. Four adsorption isotherms are: Langmuir, Freundlich, Temkin, and Van Huay were used to describe adsorption processes. Composite surface (0-20 cm) depth soil samples from four districts sites were collected. The results revealed that the K adsorption data coincide with both models with (r² = 0.99). However, Freundlich model was better in describing K adsorption than the other model. The adsorption maxima(ad_(max), distribution coefficient, buffer capacity (BC), and adsorption capacity(a_(capacity) values of soils ranged from -333 to334.5,0.54 to78.7,159.9 to 389.3, and 327 to 417mg Kkg^-1 respectively, these results showed that Sodo Zurie, Bolos Sore and Demote Sore were effective model parameters. Van Huay a_(capacity) 417mg Kkg^-1 while the bonding energy constant Langmuir is -0.075mg Kkg^-1 in Bolos Sore soil compared to other soils, which were found to be more valuable in discriminating between high K adsorption soils. Correlation between some soil properties with ad_(max) were positively a highly correlated with clay, pH, organic carbon (OC) and exchangeable potassium with r² = 0.92**, 0.93**, 0.95** and 0.96 ** respectively, but negatively correlated with bonding energy with r²= -0.79, -0.80,-0.77 and -0.72 respectively, while calcium carbonate (CaCO3) was very highly correlated with ad_(max) r²= 0.99***). The Freundlich constant, Temkin BC, and Van Hauy a_(capacity) were correlated with CaCO3 content soils with r²=0.12,-0.01,and 0.12,respectively, while slope (1/n) was significantly negatively correlated with soil cation exchange capacity (CEC), CaCO₃, clay contents and exchangeable K and Mg²⁺ with r²= 0.04, -0.67, -0.78, -0.69, and –0.69, respectively. These findings reveal the extent of K depletion in the soils of Wolaita providing a baseline for K rates required for crop production and validation of all models through real-time experiments in the field; this is recommended before the models are used on a large scale basis.     

Comparison of Heavy Metal Adsorptions by Thai Kaolin and Ballclay

The adsorption characteristics of heavy metals: cadmium(II), chromium(III), copper(II), nickel(II), lead(II), and zinc(II) ions by kaolin (kaolinite) and ballclay (illite) from Thailand were studied. This research was focussed on the pH, adsorption isotherms of single-metal solutions at 30–60 °C by batch experiments, and on ion selectivityin mixed and binary combination solutions. It was found that, except Ni, metal adsorption increased with increased pH of the solutions and their adsorption followed both Langmuir and Freundlich isotherms. Adsorption of metals in the mixture solutions by kaolin was: Cr > Zn > Cu ≈ Cd ≈ Ni > Pb, and for ballclay was: Cr > Zn > Cu > Cd ≈ Pb > Ni. The adsorption of metals was endothermic, with the exception of Cd, Pb and Zn for kaolin, Cu and Zn for ballclay. Kaolin and ballclay exhibited relatively hard Lewis base adsorption site. The presence of other metals may reduce or promote the adsorption of heavy metals. The presence of Cr³⁺ induced the greatest reduction of metal adsorptiononto kaolin, as did the presence of Cu²⁺ for ballclay.     

Effect of Soil Properties on Boron Adsorption and Release in Arid and Semi-Arid Benchmark Soils

The adsorption isotherms indicated that the adsorption of boron (B) increased with its increasing concentration in the equilibrium solution. The Langmuir adsorption isotherm was curvilinear and it was significant when the curves were resolved into two linear parts. The maximum value of adsorption maxima (b1) was observed to be 7.968 mg B kg^?1 in Garhi baghi soil and the bonding energy (k) constant was maximum at 0.509 L mg^?1 in Jodhpur ramana soil. The Langmuir isotherm best explains the adsorption phenomenon at low concentrations of the adsorbent, which of course was different for different soils. There was significant correlation between b1 and clay (r = 0.905**), organic matter contents (r = 0.734*), and cation exchange capacity (CEC; r = 0.995**) of soils. A linear relationship was observed in all the soils at all concentration ranges between 0 and 100 mg B L^?1, indicating that boron adsorption data conform to the Freundlich equation. Soils that have a higher affinity for boron adsorption, like Garhi baghi, tended to desorb less amount of boron, that is, 43.54%, whereas Ballowal saunkhari desorbed 48.00%, Jodhpur ramana 48.42%, and Naura soil 58.88% of the adsorbed boron. Boron desorption by these soils is positively and significantly correlated with the sand content (r = 0.714**) and negatively with clay content (r = ?0.502*) and CEC (r = ?0.623**). The maximum value of 37.59 mg kg^?1 for desorption maxima (Dm) was observed in Garhi baghi soil and also a constant related to B mobility (Kd) was found to be maximum in Garhi baghi (0.222 L kg^?1) soil Note: *P<0.05; ^**P<0.01.     

Remediation of Pb-Contaminated Soils in the Guadiamar River Basin (SW Spain)

Soil remediation has been studied after a spill from a settling pond of a pyrite mine in Aznalcóllar (SW Spain). The affected area was approximately 55 km² and extended about 40 km from the spill. The Pb concentration in soils ranged from 35.8 to 3231.0 mg kg^-1, with a mean value of 385.8 mg kg^-1. The remediation techniques investigated included: manual and mechanical removal of the contaminated soil, mixing the upper part of the soils by ploughing, and addition of different amendment materials to reduce the Pb solubility, such as carbonates, zeolites, iron-rich soils, bentonites and yeasts. A combination of liming with iron-rich soils proved the most effective treatment.