Isomerization and degradation kinetics of hop (Humulus lupulus) acids in a model wort-boiling system

The rate of isomerization of alpha acids to iso-alpha acids (the compounds contributing bitter taste to beer) was determined across a range of temperatures (90-130 degrees C) to characterize the rate at which iso-alpha acids are formed during kettle boiling. Multiple 12 mL stainless steel vessels were utilized to heat samples (alpha acids in a pH 5.2 buffered aqueous solution) at given temperatures, for varying lengths of time. Concentrations of alpha acids and iso-alpha acids were quantified by high-pressure liquid chromatography (HPLC). The isomerization reaction was found to be first order, with reaction rate varying as a function of temperature. Rate constants were experimentally determined to be k1 = (7.9 x 10(11)) e(-11858/T) for the isomerization reaction of alpha acids to iso-alpha acids, and k2 = (4.1 x 10(12)) e(-12994/T) for the subsequent loss of iso-alpha acids to uncharacterized degradation products. Activation energy was experimentally determined to be 98.6 kJ per mole for isomerization, and 108.0 kJ per mole for degradation. Losses of iso-alpha acids to degradation products were pronounced for cases in which boiling was continued beyond two half-lives of alpha-acid concentration.     

Oxidative reactions during early stages of beer brewing studied by electron spin resonance and spin trapping

An electron spin resonance (ESR)-based method was used for evaluating the levels of radical formation during mashing and in sweet wort. The method included the addition of 5% (v/v) ethanol together with the spin trap alpha-4-pyridyl(1-oxide)- N- tert-butylnitrone (POBN) to wort, followed by monitoring the rate of formation of POBN spin adducts during aerobic heating of the wort. The presence of ethanol makes the spin trapping method more selective and sensitive for the detection of highly reactive radicals such as hydroxyl and alkoxyl radicals. Samples of wort that were collected during the early stages of the mashing process gave higher rates of spin adduct formation than wort samples collected during the later stages. The lower oxidative stability of the early wort samples was confirmed by measuring the rate of oxygen consumption during heating of the wort. The addition of Fe(II) to the wort samples increased the rate of spin adduct formation, whereas the addition of Fe(II) during the mashing had no effect on the oxidative stability of the wort samples. Analysis of the iron content in the sweet wort samples demonstrated that iron added during the mashing had no effect on the iron level in the wort. The moderate temperatures during the early steps of mashing allow the endogenous malt enzymes to be active. The potential antioxidative effects of different redox-active enzymes during mashing were tested by measuring the rate of spin adduct formation in samples of wort. Surprisingly, a high catalase dosage caused a significant, 20% reduction of the initial rate of radical formation, whereas superoxide dismutase had no effect on the oxidation rates. This suggests that hydrogen peroxide and superoxide are not the only intermediates that play a role in the oxidative reactions occurring during aerobic oxidation of sweet wort.     

Formation of volatile compounds during heating of spice paprika (Capsicum annuum) powder

Spice paprika (red pepper; Capsicum annuum) is the most cultivated spice worldwide and is used mainly for its color and pungency. However, current research is also focusing on the flavor as an important parameter. This paper deals with the kinetics of the formation of those volatiles that indicate a decrease in spice paprika quality due to Maillard reaction, hydrolytic reactions, and oxidative degradation reactions of lipids such as fatty acids and carotenoids. Spice paprika volatiles were quantitatively analyzed by means of headspace gas chromatography (HS-GC) and solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS). The kinetics of their formation were investigated, and the respective activation energies determined. Strecker aldehyde, acetone, and methanol formation followed a pseudo-zero-order reaction kinetic, and formation of dimethyl sulfide (DMS) was characterized by a first-order kinetic. The activation energies determined were between 86.3 and 101.8 for the Strecker aldehydes acetaldehyde (AA), 2-methylpropanal (2-MP), 3-methylbutanal (3-MB), and 2-methylbutanal (2-MB), 130.7 for acetone, 114.2 for methanol, and 109.7 kJ/mol for DMS. The amounts of Strecker aldehydes formed were correlated to the concentrations of the corresponding free amino acids present in the samples. The formation of hexanal and 6-methyl-5-hepten-2-one in Capsicum annuum during processing was confirmed, and the formation of beta-ionone was probably described for the first time. During heating, the concentration of hexanal increased rapidly. The formation of 6-methyl-5-hepten-2-one confirms that Capsicum annuum fruits contain lycopene.     

Determination of stilbenes in hop pellets from different cultivars

About 30% of the polyphenols in wort and beer derive from hop, but little is yet known about their nutritional impact. The recent discovery of trans-resveratrol and piceid isomers in hop opens new doors to understanding beer health benefits. In the present work, resveratrol was quantified by HPLC-APCI-MS/MS in pellets from 9 different cultivars. Concentrations ranging from 4 to 9 mg/kg trans-piceid, from 2 to 6 mg/kg cis-piceid, and up to 1 mg/kg trans-resveratrol were detected. As previously shown for total polyphenols and flavonoids, the lower the alpha-acid content, the higher the total stilbene content.     

Influence of lipids in the generation of phenylacetaldehyde in wort-related model systems

The effect of lipids on the formation of the Strecker aldehyde phenylacetaldehyde during wort boiling was studied to determine the role that small changes in the lipid content of the wort have in the production of significant flavor compounds in beer. Wort was treated with 0-2.77 mmol per liter of glucose, linoleic acid, or 2,4-decadienal and heated at 60-98 degrees C for 1 h. After this time, the amount of the Strecker aldehyde phenylacetaldehyde increased in the samples treated with linoleic acid or decadienal but not in the samples treated with glucose. Thus, the amount of phenylacetaldehyde produced in the presence of linoleic acid was 1.1-2.5 times the amount of the Strecker aldehyde produced in the control wort, and this amount increased to 3.6-4.6 times when decadienal was employed. The higher reactivity of decadienal than linoleic acid for this reaction decreased with temperature and was related to the oxidation of linoleic acid that occurred to a higher extent at higher temperatures. The above results suggest that lipids can contribute to the formation of Strecker aldehydes during wort boiling and that changes in the lipid content of the wort will produce significant changes in the formation of Strecker aldehydes in addition to other well-known consequences in beer quality and yeast metabolism. On the other hand, because of the high glucose content in wort, small changes in its content are not expected to affect the amount of Strecker aldehydes produced.     

Thermal degradation of antioxidant micronutrients in citrus juice: kinetics and newly formed compounds

The thermal degradation kinetics of vitamin C, two carotenoids (beta-carotene and beta-cryptoxanthin), and hesperidin, as a function of temperature, were determined for Citrus juice [Citrus sinensis (L.) Osbeck and Citrus clementina Hort. ex Tan]. The influence of dissolved oxygen on the rate of ascorbic acid degradation was also assessed. Analysis of kinetic data suggested a first-order reaction for the degradation of vitamin C and carotenoids. The kinetics parameters Dtheta, z, and Ea have been calculated. Following the Arrhenius relationship, the activation energy of ascorbic acid was 35.9 kJ mol-1 and agreed with the range of literature reported value. The results on vitamin C and carotenoids from citrus juice made it possible to validate the predicting model. Thermal degradation of carotenoids revealed differences in stability among the main provitamin A carotenoids and between these and other carotenoids belonging to the xanthophyll family. The activation energies for the two provitamin A carotenoids were 110 and 156 kJ mol-1 for beta-carotene and beta-cryptoxanthin, respectively. On the other hand, no degradation of hesperidin was observed during thermal treatment. Finally, the vitamin C in citrus juice was not as heat sensitive as expected and the main provitamin A carotenoids present in citrus juice displayed a relative heat stability. The high-performance liquid chromatography-diode array detection-mass spectrometry analysis of degradation products showed that the isomerization of the epoxide function in position 5,6 into a furanoxide function in position 5,8 was a common reaction for several xanthophylls. These findings will help determine optimal processing conditions for minimizing the degradation of important quality factors such as vitamin C and carotenoid in citrus juice.     

Influence of the brewing process on furfuryl ethyl ether formation during beer aging

In beer, the development of a solvent-like stale flavor is associated with the formation of furfuryl ethyl ether. The synthesis rate of this important flavor compound is proportional to the concentration of furfuryl alcohol in beer. This study shows that furfuryl alcohol in beer is mainly formed by Maillard reactions initiated during wort boiling and malt production. A mechanism for its formation from alpha-(1,4)-oligoglucans and amino acids in wort and beer is proposed. During wort boiling, a quadratic relationship was found between the wort extract concentration, on the one hand, and the increase of furfuryl alcohol and furfural, on the other. The reduction of furfural by yeast during fermentation further increases the furfuryl alcohol content. In pale beers, the furfuryl alcohol concentration is essentially determined by the thermal load on wort during brewing operations. In dark beers, a considerable fraction of furfuryl alcohol may, however, come from the dark malts used. These results lead to important practical conclusions concerning the control over furfuryl ethyl ether in beer.     

Characterization of the temperature activation of pectin methylesterase in green beans and tomatoes

Low-temperature blanching of vegetables activates the enzyme pectin methylesterase (PME), which demethylates cell wall pectins and improves tissue firmness. This temperature activation of PME has been investigated by measuring the formation of methanol in intact tissue of green beans and tomatoes. Rates of methanol formation at temperatures of 35-65 degrees C were obtained by measuring the release of methanol from thin slices of tomato pericarp or green bean pod material. Activation energies of 112 and 97 kJ mol(-1) were calculated for PME activity in green beans and tomatoes, respectively. These activation energies indicate that the rate of pectin demethylation at 65 degrees C will be nearly 100 times that at 25 degrees C. PME activity was also determined titrimetrically using a solubilized form of the enzyme and purified pectin at temperatures from 30 to 60 degrees C. Under these conditions, much lower activation energies of 37 and 35 kJ mol(-1) were obtained for green beans and tomatoes, respectively. Methanol accumulation during heating of whole intact green beans was also determined and yielded an activation energy similar to that obtained with sliced beans. Whole green beans held at room temperature did not accumulate any methanol, but sliced or homogenized beans did. If whole beans were first heated to 45 degrees C and then cooled, methanol accumulation was observed at room temperature. These results indicate that two factors contribute to the observed high rate of pectin de-esterification during low-temperature blanching: (1) An irreversible change, causing PME to become active, occurs by heating to > or = 45 degrees C. (2) The high activation energy for pectin de-esterification means that the rate of de-esterification increases substantially with increasing temperature.     

Modification of the levels of polyphenols in wort and beer by addition of hexamethylenetetramine or sulfite during mashing.

The effects of addition of hexamethylenetetramine (HMT) or sulfite during mashing on the polyphenol content and oxidative stability of wort and beer have been evaluated in a series of laboratory mashings and pilot brews. HMT reduced the concentration of catechin, prodelphinidin B-3, and procyanidin B-3 in wort and beer, whereas the concentration of ferulic acid was unaffected. Sulfite had only a minor effect on the concentration of phenolics in wort and beer. Addition of HMT or sulfite during mashing increased the oxidative stability of the beer slightly as judged by the tendency of formation of radicals (ESR spin trapping technique), although sensory analysis gave identical flavor acceptance scores to beers produced from untreated and HMT-treated wort and lower scores to beer from sulfite-treated wort. No difference in the oxidative stability of the differently treated sweet worts could be detected as judged by the rate of formation of radicals. HMT addition during mashing has thus been demonstrated to be a valuable experimental tool to control the level of polyphenols in wort and for producing brews with various levels of polyphenols from a single malt.     

Release and evaporation of volatiles during boiling of unhopped wort

The release and evaporation of volatile compounds was studied during boiling of wort. The observed parameters were boiling time, boiling intensity, wort pH, and wort density. The effect of every parameter was discussed and approached chemically, with an eye on beer-aging processes. The results indicated that pH highly influenced the release of flavor compounds and that the formation of Strecker aldehydes was linear with boiling time. However, because of evaporation of volatiles, information about the applied thermal load on wort is lost when using a volatile heat load indicator. The thiobarbituric acid (TBA) method, which includes the nonvolatile precursors of volatile aging compounds, proved to be a more reliable method to determine all kinds of heat load on wort. Finally, it was discussed how the obtained insights could help to understand the mechanism of beer aging.     

Lycopene degradation and isomerization kinetics during thermal processing of an olive oil/tomato emulsion

The stability of lycopene in an olive oil/tomato emulsion during thermal processing (80-140 °C) was studied. Initially, the degradation of total lycopene (all-E plus Z-forms) occurred quickly at temperatures above 100 °C. However, a nonzero plateau value, depending on the processing temperature, was attained after longer treatment times. Besides degradation, the isomerization of total-Z-lycopene as well as the individual isomerization of all-E-, 5-Z-, 9-Z-, and 13-Z-lycopene was studied in detail. After prolonged heating, the isomer conversion reached a temperature-dependent equilibrium state. The degradation of total lycopene and the isomerization could be described by a fractional conversion model. The temperature dependency of the corresponding reaction rate constants was quantified by the Arrhenius equation. The activation energy of degradation was estimated to be 28 kJ/mol, and the activation energy of overall (all-E and total-Z) isomerization was estimated to be 52 kJ/mol.     

Maillard reaction kinetics in model preservation systems in the vicinity of the glass transition: experiment and theory

Rates of reactant consumption for the Maillard reaction between lysine and glucose were measured for a noncrystallizing trehalose-sucrose-water matrix in the glass transition region. At temperatures above the glass transition temperature (T(g)), the consumption rates showed Arrhenius temperature dependence with activation energies of 135 and 140 kJ mol(-1) for lysine and glucose, respectively. Finite reaction rates were observed for glassy samples that were faster than that of one of the nonglassy samples. A comparison of experimental results with predicted diffusion-controlled reaction rate constants indicated that the reaction was reaction-controlled at temperatures above T(g) and approached the diffusion-influenced regime in the glassy state. The needs for further research on reactant diffusivity, the theory of the orientation dependence of reactivity, and a detailed understanding of the reaction mechanism and kinetics were identified.     

Identification and thermal degradation kinetics of chlorophyll pigments and ascorbic acid from ditax nectar (Detarium senegalense J.F. Gmel)

Detarium senegalense J.F. Gmel (ditax) is a forest tree found in Senegal the fruits of which are characterized by an attractive green flesh with a high amount in ascorbic acid. It is generally consumed as a nectar in Senegal. In this study, the main pigments of ditax pulp were identified and quantified by HPLC-DAD. Pheophytin a (128 mg/kg), which represents 58% of the total pigments, followed by hydroxypheophytin a' (33 mg/kg), chlorophyll b (24 mg/kg), and chlorophyll a (20 mg/kg) was the major pigment of ditax pulp. Lutein and β-carotene were present in lower amounts (4.6 and 3.6 mg/kg, respectively). The thermal degradation kinetics of pheophytin a, hydroxypheophytin a', and ascorbic acid were determined at temperatures ranging from 60 to 95 °C in ditax nectar. Pheophytin a was the most heat sensitive. Thermal processing induced the formation of degradation products such as pyropheophytin a and pyropheophytin b. The kinetics parameters have been calculated according to the models of Arrhenius, Eyring, and Ball. Following the Arrhenius relation, activation energies of pheophytin a, hydroxypheophytin a', and ascorbic acid were, respectively, 79, 74, and 46 kJ mol(-1). Losses calculated during isothermal treatments were close to experimental losses in pheophytin a, hydroxypheophytin a', and ascorbic acid. The Eyring model can then be used to predict chlorophyll pigments and vitamin C losses during pasteurization of the nectar (<10%).     

Method development and fate determination of pesticide-treated hops and their subsequent usage in the production of beer

The fate of residues of seven agrochemicals (chlorfenapyr, quinoxyfen, tebuconazole, fenarimol, pyridaben, and E- and Z-dimethomorph) from the treatment on hops to the brewing of beer was studied. First, a multi-residue analytical method was developed for the determination of pesticide residues in spent hops, trub, wort, and beer. Each matrix was validated over at least two levels of fortification, for all seven compounds, in the ranges 0.05-5.0, 0.001-1.0, 0.001-0.05, and 0.0005-1.0 ppm for spent hops, trub, wort, and beer, respectively. Recoveries ranged from 73 to 136%. Second, the matrixes prepared from hops, which were treated under commercial practices with each compound, were analyzed using the method developed. The use of treated hops resulted in the carryover of 0.001 ppm of tebuconazole, 0.008 Z-dimethomorph, and 0.005 ppm of E-dimethomorph into the wort. The bulk of the remaining residues of all seven compounds was found on the spent hops. Following fermentation, all compounds were found in levels less than 0.0005 ppm in beer, except Z- (0.006 ppm) and E-dimethomorph (0.004 ppm). Third, when all seven pesticides were spiked prior to the pitching of yeast into clean wort, most of the nonpolar compounds (chlorfenapyr, quinoxyfen, and pyridaben) partitioned into the organic material (trub) which settled to the bottom, while the more polar compounds (fenarimol, tebuconazole, and E- and Z-dimethomorph) were generally distributed evenly between the beer and the trub.     

Kinetics of chlorophyll degradation and color loss in heated broccoli juice

Degradation of chlorophyll in broccoli juice occurred at temperatures exceeding 60 degrees C. Chemical analysis revealed that degradation of chlorophyll a and b to pheophytin a and b, respectively, followed first-order kinetics and that chlorophyll a was more heat sensitive than chlorophyll b. Temperature dependencies of chlorophyll a and b degradation rate constants could be described by Arrhenius equations with activation energies (E(a)) of 71.04 +/- 4.89 and 67.11 +/- 6.82 kJ/mol, respectively. Objective greenness measurements, using the -a value as the physical property, together with a fractional conversion kinetic analysis, indicated that green color degradation followed a two-step process. Kinetic parameters for the first degradation step were in accordance with the kinetic parameters for pheophytinization of the total chlorophyll content, as determined by chemical analysis (E(a) approximately 69 kJ/mol). The second degradation step, that is, the subsequent decomposition of pheophytins, was characterized by an activation energy of 105.49 +/- 4.74 kJ/mol.     

Proteolytic activation of latent Paraguaya peach PPO. Characterization of monophenolase activity

The kinetics of the activation process of latent peach PPO by trypsin was studied. By coupling this activation process to the oxidation of 4-tert-butylcatechol (TBC) to its corresponding quinone, it was possible to evaluate the specific rate constant of active PPO formation, k(3), which showed a value of 0.04 s(-1). This proteolytic activation of latent peach PPO permitted us to characterize the monophenolase activity of peach PPO for the first time using p-cresol as substrate, and it showed the characteristic lag period of the kinetic mechanism of monophenols hydroxylation, which depended on the enzyme and substrate concentration, the pH and the presence of catalytic amounts of o-diphenol (4-methylcatechol). The enzyme activation constant, k(act), was 2 microM.     

木屑及其水热炭的热解特性和动力学对比

为全面了解木屑及其水热炭的差异,获取更多关于水热炭作为化工燃料的使用特性。该文使用热重分析仪和傅里叶红外光谱仪对比研究了木屑及其水热炭在热解过程(10℃/min升温速率)中的失重特性及其官能团变化,分析了升温速率(10、20、30℃/min)对2种样品热解失重过程的影响,采用DAEM(分布活化能模型)计算了2种样品不同转化率下的活化能。结果表明:1)在200℃反应6 h得到的木屑水热炭,化学结构与木屑相似。2)在热解过程(10℃/min升温速率)中,木屑与水热炭最大失重速率分别为0.817%/℃和1.224%/℃,温度为353.57℃和363.42℃;不同终温下半焦红外光谱分析发现,水热炭更易解聚,其碳化速度更快。3)对比3种不同升温速率下2种样品的失重曲线可知,水热处理没有影响热滞后现象,样品焦炭生成量与升温速率无关,焦炭生成量平均值水热炭大于木屑。4)DAEM模型适用于2种样品热解反应活化能的求解,木屑及其水热炭活化能分别为99.33~252.72 k J/mol和63.77~211.68 k J/mol,当转化率在0.30到0.80范围时,木屑的活化能高于水热炭。研究结果为木屑水热炭热化学转化制备焦炭提供理论依据。     

Stability of isoflavones in soy milk stored at elevated and ambient temperatures

Soy isoflavones are widely recognized for their potential health benefits. The increased use of traditional and new food products calls for the assessment of their stability during processing and storage. The present study examines the stability of genistein and daidzein derivatives in soy milk. Soy milk was stored at ambient and elevated temperatures, and the change in isoflavone concentration was monitored with time. Genistin loss in time showed typical first-order kinetics, with rate constants ranging from 0.437-3.871 to 61-109 days(-1) in the temperature ranges of 15-37 and 70-90 degrees C, respectively. The temperature dependence of genistin loss followed the Arrhenius relation with activation energies of 7.2 kcal/mol at ambient temperatures and 17.6 kcal/mol at elevated temperatures. At early stages of soy milk storage at 80 and 90 degrees C, the 6' '-O-acetyldaidzin concentration increased, followed by a slow decrease. The results obtained in this study can serve as a basis for estimating the shelf life of soy milk as related to its genistin content.     

Isothermal Fourier transform infrared microspectrosopic studies on the stability kinetics of solid-state intramolecular cyclization of aspartame sweetener

A novel Fourier transform infrared (FT-IR) microspectrophotometer equipped with differential scanning calorimetry (DSC) was used to investigate the kinetics of intramolecular cyclization of aspartame (APM) sweetener in the solid state under isothermal conditions. The thermal-dependent changes in the peak intensity of IR spectra at 1543, 1283, and 1259 cm(-1) were examined to explore the reaction. The results support that the intramolecular cyclization process in APM proceeded in three steps: the methoxyl group of ester was first thermolyzed to release methanol, then an acyl cation was attacked by the lone pair of electrons available on nitrogen by an S(N)1 pathway, and finally ring-closure occurred. The intramolecular cyclization of APM determined by this microscopic FT-IR/DSC system was found to follow zero-order kinetics after a brief induction period. The bond cleavage energy (259.38 kJ/mol) of thermolysis for the leaving group of -OCH(3), the bond conversion energy (328.88 kJ/mol) for the amide II NH band to DKP NH band, and the CN bond formation energy (326.93 kJ/mol) of cyclization for the DKP in the APM molecule were also calculated from the Arrhenius equation. The total activation energy of the DKP formation via intramolecular cyclization was 261.33 kJ/mol, calculated by the above summation of the bond energy of cleavage, conversion, and formation, which was near to the value determined by the DSC or TGA method. This indicates that the microscopic FT-IR/DSC system is useful as a potential tool not only to investigate the degradation mechanism of drugs in the solid state but also to directly predict the bond energy of the reaction.     

Stability and antioxidant activity of black currant anthocyanins in solution and encapsulated in glucan gel

The effects of ferric and ferrous ions, pH, and temperature on the stability and antioxidant activity of black currant anthocyanins (BCA) were studied, and the recovery of BCA from glucan gel [mixed linked (1-->3,1-->4)-beta-D-glucan] after using different encapsulating procedures was determined. The degradation of individual anthocyanins follows first-order kinetics and shows Arrhenius temperature dependence. The activation energies of individual anthocyanins, evaluated over the temperature range 60-100 degrees C, decrease with an increase in pH. While the antioxidant activity of BCA, measured by the ferric reducing antioxidant power assay, decreased with the degradation of anthocyanins, the completely degraded products still exhibited approximately 30% of the initial antioxidant activity. Ferric ions have a detrimental effect on the stability of BCA, especially for delphinidins. Freeze drying of encapsulated BCA gives approximately 20% higher recovery of individual anthocyanins than infrared drying.