Development and transferability of two multiplexes nSSR in Scots pine (Pinus sylvestris L.)

Single sequence repeat(SSR) multiplexing is a semi high-throughput PCR methodology for the analysis of multiple SSRs.We developed two SSR multiplexes selected from SSR loci previously reported in the pine literature and tested the transferability of both SSR multiplexes in nine other pine species.We tested 234 nuclear SSR loci(n SSRs) previously described in the pine literature and selected ten n SSRs following the simple criteria of interpretability and reproducibility.Selected nuclear loci were divided into two n SSRs multiplex sets and their amplification was optimized for three different multiplex PCR methods based on:(a) a custom PCR protocol,(b) a custom protocol with hotstart taq polymerase,and(c) a commercially available kit for SSR multiplexing.To validate their performance,the level of genetic diversity was assessed in three Scots pine natural populations(Hungary,northern Sweden and southern Sweden).In addition,we also tested the transferability of these multiplexes in nine other pine species.We have developed two n SSRs multiplexes of five loci each that will contribute to reduce the costs of n SSR scoring,while increasing the capacity of n SSR loci analysis.Amplification was successful in all three populations(94 % success) and the level of polymorphism(7.1 alleles/marker) was similar to that previously reported for other Scots pine natural populations.Transferability of both multiplexes was successful for those pine species closely related to Scots pine.     

Near-infrared spectroscopy for the quantification of linseed oil uptake in Scots pine (Pinus sylvestris L.)

Abstract

Eighteen sapwood and 18 heartwood samples from three Scots pine (Pinus sylvestris L.) trees were used to identify correlations between the features of their near-infrared spectra (400–2500 nm) measured before and after impregnation with linseed oil (Linogard^®) and (1) the amount of oil taken up by the samples at three different longitudinal positions; and (2) the tissue type of sample. Calibration models were cross-validated and oil uptake models were also validated on separate test sets. Partial least squares regression models for the prediction of uptake and tissue type in non-impregnated wood were promisingly accurate, having coefficients of multiple determination (Q ²) values of > 0.8, 0.8 and 0.75 for predictions of tissue type, oil taken up as a percentage of sample mass and total mass of oil taken up, respectively. The models developed for linseed oil-impregnated samples were better still, generating Q ² values of > 0.9, > 0.8 and 0.8 for the three key properties. In general, models based on spectra acquired along two directions of measurement (longitudinal and tangential) were more accurate than models based on only one. Tandem models consisting of two submodels, one for sapwood and one for heartwood, were more successful than single models applicable to both tissue types.     

Induction of discolored wood in Scots pine (Pinus sylvestris)

Induction of discolored wood in Scots pine (Pinus sylvestris L.) trees by treatment with ethylene, carbon dioxide, nitrogen (hypoxia) or wounding from early April to late September was investigated. All treatments induced formation of discolored wood upward and downward from the drill hole. The amount of discolored wood formed above the drill hole depended on the treatment in the following order: ethylene > carbon dioxide = nitrogen > wounding; and below the drill hole in the order: ethylene > carbon dioxide = nitrogen = wounding. Based on chemical analyses (HPLC/UV, GS/MS, LC/MS and 1H-NMR), discolored wood induced by wounding or treatment with ethylene or carbon dioxide showed compositional similarities to natural heartwood, whereas discolored wood induced by nitrogen treatment showed fewer similarities to natural heartwood. The results suggest that ethylene is an important factor controlling heartwood formation, although wounding and internal concentrations of carbon dioxide may also play a role.     

Outdoor exposure of untreated Scots pine (Pinus sylvestris L.) and Norway spruce [Picea abies (L.) Karst.] wood samples

Abstract

Untreated Scots pine (Pinus sylvestris) and Norway spruce (Picea abies) samples were exposed above ground in a durability test for 6 years. The samples consisted of three pieces of wood, 22×95×500 mm, screwed together; two pieces lengthwise with a third piece overlapping. Weight was measured, to calculate moisture content (MC), and samples checked regularly for cracks and fungal growth. Parameters investigated were heartwood/sapwood (pine), annual ring orientation (spruce), stand site, annual ring width and density. Stand site, annual ring width and density had no influence on MC or fungal growth for either pine or spruce. Spruce samples with vertical annual rings had fewer cracks than samples with horizontal annual rings. Pine sapwood samples had a high MC and a large amount of rot fungi, while heartwood had a lower MC and no rot. Most spruce samples were similar to pine heartwood, except from a few samples that had high MC and fungal growth. Those were all sawn from the outer part of the log. Therefore, it can be stated that spruce sawn from the inner part has almost the same properties as pine heartwood, while spruce from the outer part of the log has similar properties to pine sapwood.     

Improved recruitment and early growth of Scots pine (Pinus sylvestris L.) seedlings after fire and soil scarification

The success of seedling recruitment of Scots pine (Pinus sylvestris L.) is strongly dependent on soil surface properties, such as humus depth and moisture content. In an undisturbed forest floor, seedlings are seldom able to become established due to the high incidence of desiccation in the organic soil layer. Methods that remove the organic soil layer are often necessary to improve the availability for radicles to reach the more stable moisture regime in the mineral soil. In this study we investigated pine-seedling establishment after mechanical soil scarification, burning of litter (O_L) and burning of litter and humus (O_L and O_FH) in two mature pine stands in Germany. The herbaceous layer of the first stand was dominated by grasses (Molinia caerulea L. and Deschampsia flexuosa L.), whereas the herbaceous layer of the second stand was dominated by blueberry (Vaccinium myrtillus L.). Pine seeds were placed in experimental plots, and seedling numbers and heights were recorded at regular intervals. All treatments that removed organic soil resulted in higher seedling counts than did the undisturbed forest floor. The highest seedling counts were found on scarified and severely burnt plots, whereas seedling counts were lower on lightly burnt plots. Seedlings were significantly taller on burnt plots. This study shows that pine regeneration is stimulated by fire, not only in boreal forests, but also under central European conditions. With the expectation of higher fire frequency in the near future due to climatic changes, natural regeneration and succession on burnt sites should receive more focus in forest management and research.     

Browsing by large herbivores on Scots pine (Pinus sylvestris) seedlings in mixture with ash (Fraxinus excelsior) or silver birch (Betula pendula)

Abstract

Food selection by large herbivores occurs at a hierarchy of scales, for example landscape, patch or plant. Several hypotheses regarding food plant selection on patch or plant level have been developed. In this cafeteria-type design field experiment, conducted during one winter immediately after planting, we tested the effect of species mixture on browsing by large herbivores (mainly roe deer) on Scots pine seedlings in mixture with seedlings of ash (highly preferred) or silver birch (less preferred). Browsing on Scots pine was not affected by species mixture, neither in terms of the number of browsed pines nor browsing intensity. Instead, browsed biomass was positively and significantly correlated to the total biomass available for browsing. Also, there were differences due to species, with ash being most browsed (44.6%), followed by Scots pine (18.9%) and silver birch (11.6%). Browsed biomass per browsed seedling, however, was largest for Scots pine. In addition, browsed seedlings were initially taller compared to unbrowsed seedlings for all species. The main management implication in this study is that the species mixture did not influence large herbivore browsing on Scots pine seedlings. Hence, removing or discouraging more (or less) attractive browse species in early stages of pine regeneration activities seems unnecessary from the point of large herbivore browsing.     

Current growth differences of Norway spruce (Picea abies), Scots pine (Pinus sylvestris) and birch (Betula pendula and Betula pubescens) in different regions in Sweden

Abstract

The choice of species in forestry is important, and a real issue as large areas of wind-damaged forest land in southern Sweden need to be regenerated. To compare the growth potential between the most common tree species in Sweden, ratios between site quality derived from site index values determined with site properties were used. A regression function to determine site index for birch from site properties was used to complement the known relationships between site properties and site index for spruce and pine. In large regions of Sweden the distribution of site quality classes was calculated to compare the special characteristics and demands of the three species. On average, the growth difference for pine compared to spruce was about 60% in southern Sweden and 95% in northern Sweden. Corresponding figures between birch and spruce were 40% and 60%. Birch was expected to produce around 60% of pine in northern Sweden and about 70% in southern Sweden. However, it must be stressed that the comparison is based on survey data encompassing mainly naturally regenerated birch, whereas spruce and pine are mainly planted.     

Early Influence of Wood Ash Application on the Carbohydrate Reserves and Composition in Needles of Scots pine {Pinus sylvestris)

Abstract

Wood ash treatment can probably increase forest productivity on low fertility sites. However, the resulting effect on the carbohydrate concentration as the main carbon and energy reserve in trees is little studied. In 2000, a square of 0.1 ha sandy soil below a 19-year-old Scots pine (Pinus sylvestris) plantation was treated with raw fly ash (0.5 kg.m^-2); untreated square was used as control. One year after the treatment, carbohydrates (glucose, fructose, sucrose, maltodextrins, starch and excess bound fructose) were analyzed enzymatically from current-year and one-year-old needles. The ratio K/N in needles suggested an improved balance between these elements in treated trees, in which the K concentration was higher. The largest relative differences (50% of control) were observed in glucose and fructose in summer. The squares did not differ in the concentration of the accumulated carbohydrate reserves in needles during low temperature stress in winter and before the growth of new shoots in spring. During the vegetation period decreased levels of soluble carbohydrates and starch were observed (max 70% of the control value around 100 mg total carbohydrates g^-1 dry mass). Because the experiment was designed without true replicates, reasons for the observed differences require further study.     

Water sorption in coated Scots pine (Pinus sylvestris L.) logs and influence of incipient decay

Abstract

Scots pine log specimens were given three different surface treatments and two different orientations of large cracks, and subjected to cyclic wetting and drying. Individual fitting of a mechanistic growth model was used to study the shape of absorption and accumulation curves and the final drying curve. Two parameters from this model (increase/decrease rate and maximum/minimum weight gain) were used for statistical analysis. The results indicate that wood tar results in less accumulated moisture over time than solvent-borne or water-borne coating or no treatment at all. An incipient attack by a white-rot fungus on parts of the material during storage affected water uptake greatly, often overriding surface treatment.     

Assessment of early survival and growth of planted Scots pine(Pinus sylvestris) seedlings under extreme continental climate conditions of northern Mongolia

Environmental factors play vital roles in successful plantation and cultivation of tree seedlings.This study focuses on problems associated with reforestation under extreme continental climatic conditions.The objectives were to assess relative seedling performance(survival and growth)with respect to plantation age,and to analyze the influence of specific climatic factors during the early stages of Scots pine(Pinus sylvestris L.)plantations.The study was carried out in reforested areas of the Tujyin Nars region of northern Mongolia on six Scots pine plantations ranging from 5 to 10 years.In each of the six plantations,five 900 m^2 permanent sample plots were established and survival rates and growth performance measured annually over 7 years.Results show high variation in survival among the plantations(p<0.001,F=29.7).Seedling survival in the first year corresponded directly to the number of dry days in May.However,survival rate appeared to stabilize after the second year.The insignificant variation of height categories throughout the observation period indicated low competition among individuals.Two linear mixed-effect models show that height and radial growth were best explained by relative air humidity,which we consider to be a reliable indicator of site-specific water availability.Insufficient amounts and uneven distribution of rainfall pose a major threat during the first year of plantation establishment.Humidity and water availability are decisive factors for a successful seedling plantation.This highlights the impact of drought on forest plantations in northern Mongolia and the importance of developing climate resilient reforestation strategies.     

树龄对日本落叶松木材物理力学性质的影响

选取日本落叶松为试验材料,开展不同树龄日本落叶松物理力学性质的比较研究.结果表明:43年生、30年生和17年生日本落叶松木材气干密度分别为0.607,0.567和0.507 g/cm3,气干体积干缩率分别为7.7％,7.7％和7.1％;全干到气干体积湿胀率分别为5.1％,4.9％和4.5％;抗弯弹性模量分别为17.527,16.775和12.510 GPa,抗弯强度分别为121.1,110.3和90.9 MPa,顺纹抗压强度分别为56.8,51.8和44.0 MPa.随着树龄增大,日本落叶松木材密度、顺纹抗压强度、抗弯强度和抗弯弹性模量等各项物理力学性能指标提高,差异干缩逐渐变小.日本落叶松木材的气干密度与抗弯弹性模量、抗弯强度、顺纹抗压强度呈线性正相关,相关系数分别为0.760,0.816和0.900.     

Durability of thermally modified Norway spruce and Scots pine in above-ground conditions

Abstract

One of the main objectives of thermal modification is to increase the biological durability of wood. In this study the fungal resistance of Norway spruce and Scots pine, thermally modified at 195°C and 210°C, was studied with a lap-joint field test. Untreated pine and spruce and pine impregnated with tributyl tin oxide (TBTO) and copper, chromium and arsenic (CCA) were selected as reference materials. The evaluations were carried out after 1, 2 and 9 years of exposure. After 1 and 2 years of exposure mainly discoloration was detected. Only the untreated pine was slightly affected by decay fungi. There were significant differences in the decay ratings of untreated and thermally modified wood materials after 9 years in the field. While the untreated wood materials were severely attacked by decay fungi or reached failure rating, only small areas of incipient decay were detected in the thermally modified samples. Thermally modified pine was slightly more decayed than thermally modified spruce. The only wood material without any signs of decay was CCA-treated pine, since some of the TBTO-treated pine samples were also moderately attacked by fungal decay. The results of the lap-joint test had a good correlation with mass losses in a laboratory test with brown-rot fungi.     

Natural weathering of Scots pine (Pinus sylvestris L.) wood treated with epoxidized linseed oil and methyltriethoxysilane

In this study, the effect of natural weathering on the performance of Scots pine sapwood treated with epoxidized linseed oil (ELO) and methyltriethoxysilane (MTES) was investigated by measuring water uptake, colour, check propagation and chemical changes. Boards were impregnated in a pilot-scale autoclave under various conditions. After the treatments, pairs of samples were cut from the treated boards and exposed at 45° angle facing south for a long-term test of natural weathering above ground in Uppsala (Sweden). The effect of solar radiation and humidity on the colour changes, water uptake, check propagation and chemical alterations was assessed during 20 months of exposure. The obtained results can serve as indication for the viability of the treatments. Samples impregnated with low retentions of ELO showed similar performance regarding check propagation and moisture uptake as samples with higher retentions. No significant difference between these samples was found regarding colour change which is mainly caused by blue stain fungi on the surface. In opposite, samples treated with MTES exhibited no consistent water uptake and check propagation unproportioned to the applied retentions. The spectra of ELO- and MTES-treated wood after weathering showed a significant decrease of the peak at 1510 cm^?1 indicating delignification of wood surface caused by weathering.     

Rectangularity of planed Scots pine (Pinus sylvestris) planks

Abstract

This study deals with how warp affects the cross-sectional shape of planed planks. A total of 20 planks with dry target cross-sectional dimensions of 50×150 mm were planed to 45×145 mm. The rectangularity of five cross sections of every plank was measured before and after planing. The cutting depths were measured in 10 positions in the cross sections, and the angles between the planks and the cutters were calculated. Also, the warp, that is, twist, bow, crook, and cup, was measured before and after planing. All the studied properties pointed in the same direction. In terms of both rectangularity and angles of cut, the problems were larger in the top and butt ends of the investigated planks than in the intermediate parts, and the main reason for deviations from the desired result after planing was twist.     

Effects of temperature on the site productivity of Pinus sylvestris and lodgepole pine in Finland and Sweden

The influence of temperature regime on forest production in the northern boreal forest was studied by analysing the variation in site index for 20 provenance tests of lodgepole pine (Pinus contorta Dougl. var. latifolia Engelm.) in Finland and Sweden with respect to temperature. The site indices were regressed with several different temperature variables, which were obtained from interpolated monthly averages over 30 years from permanent meteorological stations nearby. There were strong correlations between all tested temperature variables and site index (r = 0.80–0.94). Site fertility influenced site index to some extent but the slope of the test sites did not. An increase in temperature sum from 600 to 1200 degree days (corresponding to an increase of the mean temperature in July from 13 to 15°C) was associated with an increase in site index of Scots pine (Pinus sylvestris L.) from 12.2 to 21.6 m (77%). Such an increase in site index can be assumed to correspond to an increase of 6.5 m³ ha^?1 wood (183%) in mean annual increment. The effect of temperature was greater on poor sites than on fertile sites, and in harsh temperature regimes than in mild.     

Abundance and control of Lygus rugulipennis (Heteroptera: Miridae) on Scots pine (Pinus sylvestris L.) nursery stock

Population fluctuations of the European tarnished plant bug (Lygus rugulipennis Popp.) on nursery-grown Scots pine, Pinus sylvestris L. were monitored with sweep net samples over five growing seasons. The effects of cypermethrin, lindane and oxydemetonmethyl insecticide sprayings on the occurrence of Lygus adults and nymphs and prevalence of bud disorders of pine seedlings were studied. The number of Lygus bugs was highest in 1984, the first year of the study, and thereafter the annual levels of the bug declined, reaching a low in 1988. On 2- and 3-year-old Scots pine seedlings the numbers of overwintered L. rugulipennis adults and nymphs correlated positively with the occurrence of abnormal buds. Cypermethrin sprayings significantly reduced the numbers of Lygus nymphs in 1985 and 1987. In 1986 significantly fewer damaged seedlings and L. rugulipennis adults were found in pine transplants treated with cypermethrin.     

Effects of impregnation of simple phenolic and natural polycyclic compounds on physical properties of wood

The impregnation of various simple phenolic and natural polycyclic compounds into wood was investigated from the viewpoints of vibrational property and dimensional stabilizing effect. When simple phenolic compounds were impregnated, the loss tangent (tan ) in the longitudinal direction increased linearly with increasing weight gain. Meanwhile, among the natural polycyclic compounds hematoxylin decreased the tan drastically by impregnation. It was suggested that the five hydroxyl groups and the pyran ring oxygen in the hematoxylin molecule contribute to formation of the crosslinkage-type hydrogen bonds between wood components. The rigidity of hematoxylin molecules may also be important. By impregnation of about 10% catechol, resorcinol, and saligenin, a 40% level of antiswelling efficiency (ASE) was attained, although a significant dimensional stabilizing effect was not observed after impregnation of natural polycyclic compounds.Part of this work has been published as a Rapid Communication inMokuzai Gakkaishi 43(12). It was also presented at the 48th annual meeting of the Japan Wood Research Society, Shizuoka, April 1998     

Decay resistance of sapwood and heartwood of untreated and thermally modified Scots pine and Norway spruce compared with some other wood species

Abstract

Thermal modification has been developed for an industrial method to increase the biological durability and dimensional stability of wood. In this study the effects of thermal modification on resistance against soft- and brown-rot fungi of sapwood and heartwood of Scots pine and Norway spruce were investigated using laboratory test methods. Natural durability against soft-rot microfungi was determined according to CEN/TS 15083-2 (2005) by measuring the mass loss and modulus of elasticity (MOE) loss after an incubation period of 32 weeks. An agar block test was used to determine the resistance to two brown-rot fungi using two exposure periods. In particular, the effect of the temperature of the thermal modification was studied, and the results were compared with results from untreated pine and spruce samples. The decay resistance of reference untreated wood species (Siberian larch, bangkirai, merbau and western red cedar) was also studied in the soft-rot test. On average, the soft-rot and brown-rot tests gave quite similar results. In general, the untreated heartwood of pine was more resistant to decay than the sapwood of pine and the sapwood and heartwood of spruce. Thermal modification increased the biological durability of all samples. The effect of thermal modification seemed to be most effective within pine heartwood. However, very high thermal modification temperature over 230°C was needed to reach resistance against decay comparable with the durability classes of “durable” or “very durable” in the soft-rot test. The brown-rot test gave slightly better durability classes than the soft-rot test. The most durable untreated wood species was merbau, the durability of which could be evaluated as equal to the durability class “moderately durable”.     

Effects of heat treatment on some properties of MDF (medium-density fiberboard)

This work investigated some mechanical, physical and free formaldehyde emission properties of heat-treated MDF. For this purpose, MDF panels were subjected to varying heat treatment temperatures (155°C, 165°C and 175°C), durations (2.5?h., 3.5?h. and 4.5?h.) and waiting times after hot pressing (30?min., 120?min. and 600?min). Thickness swelling (TS), water absorption (WA), free formaldehyde emission (FFE), bending strength (BS), modulus of elasticity (MOE), tensile strength perpendicular to fibers (TSPF) for treated and untreated samples were tested and evaluated statistically. Consequently, after the heat treatment values of tensile strength, bending strength and modulus of elasticity were almost negatively affected relatively, but the thickness swelling and water absorption and quantities of free formaldehyde were improved positively of MDF samples.     

Elastic strain at semi-isostatic compression of Scots pine (Pinus sylvestris)

Quarter-sawn and plain-sawn specimens of Scots pine were semi-isostatically compressed at 5, 15, 50, and 140 MPa in a Quintus press. Elastic strain was measured using a telescope device that was pushed together when wood was compressed and remained in this position at release of pressure. Delayed elastic and plastic strains were assessed through repeated callipering during 5 years after densification. At 140 MPa, wood reached an almost compact structure (ρ ≈ 1450 kg/m³) but as a result of elastic springback the density decreased to just below 1000 kg/m³. At 140 MPa, the elastic and delayed elastic strains were 14.6% and 1.8%, respectively, in quarter-sawn specimens, and were 13.1% and 0.8%, respectively, in plain-sawn specimens. The higher elastic strains in quarter-sawn specimens can be attributed to elastic springback in the tangentially deformed latewood bands.