Estimation of genetic parameters for growth and feed utilization traits in Japanese Black cattle

Performance test results of 3250 sire candidates were used to estimate the genetic parameters of growth and feed utilization traits in Japanese Black cattle. Growth traits analyzed were six body measurements at the end of the performance test and daily gain (DG) during the test. Feed utilization traits were intakes and conversions of concentrate, roughage, digestible crude protein and total digestible nutrient (TDN). Genetic (co)variance components were estimated by the restricted maximum likelihood procedure using an expectation maximization algorithm under the two‐trait animal model. Heritabilities for growth traits ranged from 0.40 to 0.70 and for feed utilization traits from 0.21 to 0.74. Genetic correlations of DG were positive with feed intake (0.15–0.77) and negative with feed conversions (?0.63 to ?0.30). These relationships indicate that the selection based on DG improves feed efficiency but it simultaneously increases feed intake. Feed conversions showed genetic correlations ranging from ?0.09 to 0.03 with total available energy consumption, TDN intake. Thus the results suggested that feed conversions were not efficient selection criteria to decrease TDN intake and to improve comprehensive feed utilization ability.     

Genetic parameters for production traits and measures of residual feed intake in Duroc and Landrace pigs

Data on 380 Duroc boars from seven generations, and 1026 Landrace pigs (341 boars and 685 gilts) from six generations were used to estimate genetic parameters for daily gain (DG), backfat thickness (BF), metabolic weight (MWT), daily feed intake (FI), feed conversion ratio (FCR) and residual feed intake (RFI). Two measures of RFI were estimated as the difference between actual feed intake and that predicted from models that included initial test age and weight and DG (RFI1); and initial test age and weight, DG and BF (RFI2). Heritability estimates for DG, MWT and FI were moderate for both breeds. BF estimates were high for both the breeds. The measures of feed efficiency (FCR and RFI) were moderately heritable. Genetic correlations of BF with measures of RFI were stronger when BF was not included in the estimation of RFI (0.40 and 0.46 for Duroc and Landrace, respectively (for RFI1), compared with 0.05 and 0.06 for Duroc and Landrace, respectively (for RFI2)). Genetic correlations of MWT with measures of RFI were all negative and low. Genetic and phenotypic correlations between DG and measures of RFI were close to zero, which indicated that selection for reduced RFI could be made without adversely affecting DG. BF should also decrease, and MWT should increase under selection for reduced RFI. The reduction in BF would depend on the measure of RFI used.     

Correlated responses in sow appetite, residual feed intake, body composition, and reproduction after divergent selection for residual feed intake in the growing pig

Residual feed intake (RFI) has been explored as an alternative selection criterion to feed conversion ratio to capture the fraction of feed intake not explained by expected production and maintenance requirements. Selection experiments have found that low RFI in the growing pig is genetically correlated with reduced fatness and feed intake. Selection for feed conversion ratio also reduces sow appetite and fatness, which, together with increased prolificacy, has been seen as a hindrance for sow lifetime performance. The aims of our study were to derive equations for sow RFI during lactation (SRFI) and to evaluate the effect of selection for RFI during growth on sow traits during lactation. Data were obtained on 2 divergent lines selected for 7 generations for low and high RFI during growth in purebred Large Whites. The RFI was measured on candidates for selection (1,065 pigs), and sow performance data were available for 480 sows having from 1 to 3 parities (1,071 parities). Traits measured were sow daily feed intake (SDFI); sow BW and body composition before farrowing and at weaning (28.4 ± 1.7d); number of piglets born total, born alive, and surviving at weaning; and litter weight, average piglet BW, and within-litter SD of piglet BW at birth, 21 d of age (when creep feeding was available), and weaning. Sow RFI was defined as the difference between observed SDFI and SDFI predicted for sow maintenance and production. Daily production requirements were quantified by litter size and daily litter BW gain as well as daily changes in sow body reserves. The SRFI represented 24% of the phenotypic variability of SDFI. Heritability estimates for RFI and SRFI were both 0.14. The genetic correlation between RFI and SRFI was 0.29 ± 0.23. Genetic correlations of RFI with sow traits were low to moderate, consistent with responses to selection; selection for low RFI during growth reduced SDFI and increased number of piglets and litter growth, but also increased mobilization of body reserves. No effect on rebreeding performance was found. Metabolic changes previously observed during growth in response to selection might explain part of the better efficiency of the low-RFI sows, decreasing basal metabolism and favoring rapid allocation of resources to lactation. We propose to consider SRFI as an alternative to SDFI to select for efficient sows with reduced input demands during lactation.     

Estimates of genetic parameters for feed intake, feeding behavior, and daily gain in composite ram lambs

Our objective was to estimate genetic parameters for feed intake, feeding behavior, and ADG in composite ram lambs ((1/2) Columbia, (1/4) Hampshire, (1/4) Suffolk). Data were collected from 1986 to 1997 on 1,239 ram lambs from approximately 11 to 17 wk of age at the U.S. Meat Animal Research Center near Clay Center, NE. Feeding equipment consisted of an elevated pen with an entrance chute that permitted access to the feeder by only one ram lamb at a time, with disappearance of feed measured by an electronic weighing system. Ram lambs were grouped 11 per pen from 1986 to 1989, and nine per pen from 1990 to 1997. Data were edited to exclude invalid feeding events, and approximately 80% of the data remained after edits were applied. Traits analyzed were daily feed intake (DFI), event feed intake (EFI), residual feed intake (RFI), daily feeding time (DFT), event feeding time (EFT), number of daily feeding events (DFE), and ADG. Feed intake traits of DFI and EFI had estimated heritabilities of 0.25 and 0.33, respectively, whereas estimated heritability of RFI was 0.11. Heritability estimates for feeding behavior traits, including DFT, EFT, and DFE, ranged from 0.29 to 0.36. Average daily gain had an estimated heritability of 0.26. Genetic correlations were positive between all pairs of traits, except for RFI and ADG, and that estimate was essentially zero. Phenotypic correlations were generally similar to genetic correlations. Genetic correlations were large (0.80) between DFI and ADG, intermediate between DFI and RFI (0.61) and between DFT and DFE (0.55), and low (0.17 to 0.31) for the other pairs of traits, with the exception of RFI and ADG (-0.03). Genetic correlations between behavioral traits were greater than correlations between behavioral traits and measures of feed intake or ADG; however, selection for ADG and/or feed intake would be expected to cause some changes in feeding behavior.     

Genetic associations between feed efficiency measured in a performance test station and performance of growing cattle in commercial beef herds

Interest in selection for improved feed efficiency is increasing, but before any steps are taken toward selecting for feed efficiency, correlations with other economically important traits must first be quantified. The objective of this study was to quantify the genetic associations between feed efficiency measured during performance testing and linear type traits, BW, live animal value, and carcass traits recorded in commercial herds. Feed efficiency data were available on 2,605 bulls from 1 performance test station. There were between 10,384 and 93,442 performance records on type traits, BW, animal value, or carcass traits from 17,225 commercial herds. (Co)variance components were estimated using linear mixed animal models. Genetic correlations between the muscular type traits in commercial animals and feed conversion ratio (-0.33 to -0.25), residual feed intake (RFI; -0.33 to -0.22), and residual BW gain (RG; 0.24 to 0.27) suggest that selection for improved feed efficiency should increase muscling. This is further evidenced by the genetic correlations between carcass conformation of commercial animals and feed conversion ratio (-0.46), RFI (-0.37), and residual BW gain (0.35) measured in performance-tested animals. Furthermore, the genetic correlations between RFI and both ultrasonic fat depth and carcass fat score (0.39 and 0.33, respectively) indicated that selection for improved RFI will result in leaner animals. It can be concluded from the genetic correlations estimated in this study that selection for feed efficiency will have no unfavorable effects on the performance traits measured in this study and will actually lead to an improvement in performance for some traits, such as muscularity, animal price, and carcass conformation. Conversely, this suggests that genetic selection for traits such as carcass quality, muscling traits, and animal value might also be indirectly selecting for more efficient animals.     

Genetic parameters for production traits and measures of residual feed intake in large white swine.

The purpose of this study was to estimate genetic parameters for ADG, backfat thickness and loin eye area (LEA), and measures of feed intake and efficiency for purebred Large White boars born from 1990 to 1997. Boars from 60% of the litters were culled at weaning based on a maternal breeding value (index) of the dam, and remaining boars (n = 26,706) were grown to 100 d of age. Selection of boars for individual pen testing was based on a combination of growth and maternal indices. Boars were fed a corn-soybean meal diet that was 1.14% lysine, 19% protein, and 3,344 kcal/kg ME for approximately 77 d. Boars were weighed at the beginning and end of the test, and feed intake was recorded. Daily feed intake (DFI), ADG, and feed:gain ratio (FG) were computed. Four measures of residual feed intake (RFI) were estimated as the difference between actual feed intake and that predicted from models that included 1) initial test age and weight and test ADG (RFI1); 2) initial test age and weight, test ADG, and backfat (RFI2); 3) initial test age and weight, test ADG, and LEA (RFI3); and 4) initial test age and weight, test ADG, backfat, and LEA (RFI4). Genetic parameters were estimated using an animal model and single- or multiple-trait DFREML procedures. Models included fixed effects of contemporary groups and initial test age as a covariate and random animal and litter effects. Heritability estimates for test ADG, DFI, FG, backfat, LEA, RFI1, RFI2, RFI3, and RFI4 were .24, .23, .16, .36, .24, .17, .11, .15, and .10, respectively. Genetic correlations between ADG and backfat, ADG and LEA, ADG and DFI, and ADG and FG were .37, .36, .82, and -.32, respectively. Genetic correlations between ADG and measures of residual feed intake ranged from .11 to .18. Genetic correlations of backfat with LEA, DFI, and FG were -.27, .64, and .40, respectively. Genetic correlations of backfat with RFI measures were higher when backfat was not included in the estimation of RFI. Genetic correlations for LEA with DFI and FG were 0 and -.52, respectively. Genetic correlations for LEA with RFI measures were all negative and ranged from -.31 to -.51. Genetic correlations indicate that selection for reduced RFI could be made without adversely affecting ADG. Backfat should also decrease, and LEA should increase. The amount of change in backfat or LEA would depend on the measure of RFI used.     

Selection for feed efficiency does not change the selection for growth and carcass traits in Nellore cattle

The objectives were to conduct a genetic evaluation of residual feed intake (RFI) and residual feed intake adjusted for fat (RFIFat) and to analyse the effect of selection for these traits on growth, carcass and reproductive traits. Data from 945 Nellore bulls in seven feed efficiency tests in a feedlot were analysed. Genetic evaluation was performed using an animal model in which the feed efficiency test and age of the animal at the beginning of the test were considered as a systematic effect. Direct additive genetic and residual effects were considered as random effects. Correlations and genetic gains were estimated by two‐trait analysis between feed efficiency measures (RFI and RFIFat) and other traits. Feed conversion showed low heritability (0.06), but dry matter intake (DMI), average daily gain, RFI, RFIFat, metabolic body weight and scrotal circumference measured at 450 days of age (SC450) showed moderate to high heritability (0.49, 0.28, 0.33, 0.36, 0.38 and 0.80, respectively). Similarly, ribeye area, backfat thickness, rump cap fat thickness, marbling score and subcutaneous fat thickness also had high heritability values (0.46, 0.37, 0.57, 0.51 and 0.47, respectively). Genetic correlations between RFI and SC450 were null, and between RFIFat and SC450 were strongly positive. Genetic and phenotypic correlations of RFI and RFIFat with carcass traits were not different from zero, as correlated responses for carcass traits were also not different from zero. The Nellore selection for feed efficiency by RFI or RFIFat allows the recognition of feed efficient animals, with DMI reduction and without significant changes in growth and carcass traits. However, because of the observed results between RFIFat and SC450, selection of animals should be analysed with caution and a preselection for reproductive traits is necessary to avoid reproductive impairments in the herd.     

Genetic parameters for feed efficiency traits and their relationships with growth and carcass traits in Duroc pigs

Genetic parameters for feed efficiency traits of 380 boars and growth and carcass traits of 1642 pigs (380 boars, 868 gilts and 394 barrows) in seven generations of Duroc population were estimated. Feed efficiency traits included the feed conversion ratio (FCR), and nutritional (RFI(nut)), phenotypic (RFI(phe)) and genetic (RFI(gen)) residual feed intake. Growth and carcass traits were the age to reach 105-kg body weight (A105), loin eye muscle area (EMA), backfat (BF), intra-muscular fat (IMF) and meat tenderness. The mean values for RFI(phe) and RFI(gen) were close to zero and for RFI(nut) was negative. All the measures of feed efficiency were moderately heritable (h(2) = 0.31, 0.38, 0.40 and 0.27 for RFI(nut), RFI(phe), RFI(gen) and FCR respectively). The heritabilities for all growth and carcass traits were moderate (ranged from 0.37 to 0.45), except for BF, which was high (0.72). The genetic correlations of RFI(phe) and RFI(gen) with A105 were positive and high. Measures of RFI were correlated negatively with EMA. BF was more strongly correlated with measures of RFI (r(g) > or = 0.73) than with FCR (r(g) = 0.52). Selection for daily gain, EMA, BF and IMF caused favourable genetic changes in feed efficiency traits. Results of this study indicate that selection against either RFI(phe) or RFI(gen) would give a similar correlated response in carcass traits.     

Genetic parameters for measures of the efficiency of gain of boars and the genetic relationships with its component traits in Duroc pigs

Genetic parameters for the efficiency of gain traits on 380 boars and the genetic relationships with component traits were estimated in 1,642 pigs (380 boars, 868 gilts, and 394 barrows) in 7 generations of a Duroc population. The efficiency of gain traits included the feed conversion ratio (FCR) and residual feed intake (RFI) and their component traits, ADG, metabolic BW (MWT), and daily feed intake (FI). The RFI was calculated as the difference between the actual and expected FI. The expected FI was predicted by the nutritional requirement and by the residual of phenotypic (RFI(phe)) and genetic (RFI(gen)) regressions from the multivariate analysis for FI on MWT and ADG. The means for RFI(phe) and RFI(gen) were close to zero, and the mean for nutritional RFI was negative (-0.11 kg/d). The traits studied were moderately heritable (ranging from 0.27 to 0.53). The genetic and phenotypic correlations between ADG and FI were moderate to high, whereas the genetic correlation between MWT and FI was moderate, and the phenotypic correlation between them was low. The corresponding correlations between RFI(phe) and RFI(gen) were > 0.95, implying that they can be regarded as the same trait. The genetic and phenotypic correlations of FCR with measures of RFI were high but lower than unity. The RFI(phe) was phenotypically independent of its component traits, MWT (r(p) = 0.01) and ADG (r(p) = 0.03). The RFI(gen) was genetically independent of MWT (r(g) = -0.04), whereas there was a weak genetic relationship (r(g) = 0.15) between RFI(gen) and ADG. Residual FI was more heritable than FCR, and the genetic and phenotypic correlations of RFI(phe) and RFI(gen) with FI were positive and stronger than that of FCR with FI. These results provide evidence that RFI(phe) or RFI(gen) should be included in breeding programs for Duroc pigs to make genetic improvement in the efficiency of gain.     

Genetic parameters for feed efficiency and body weight traits in Japanese quail

1. The objectives of the present study were to estimate heritability and genetic correlations for feed efficiency and body weight (BW) in Japanese quail.

2. Recorded traits during different weeks of the growing period were BW from hatch to 35 d, feed intake (FI), feed conversion ratio (FCR) and residual feed intake (RFI) from hatch to 28 d of age.

3. Genetic parameters were estimated by restricted maximum likelihood method using ASREML software. The results showed that heritability estimates for BW ranged from 0.11 to 0.22, and maternal permanent environmental effect was the highest at hatch (0.45). FCR, RFI and FI showed moderate heritabilities ranging from 0.13 to 0.40.

4.Genetic correlations of BW₂₈ with FI_0–28 (0.88) and RFI_0–28 (0.1) and genetic correlation of FI_0–28 with FCR_0–28 (0.13) and RFI_0–28 (0.52) were positive. A negative genetic correlation was found between BW₂₈ and FCR_0–28 (?0.49). There was a high positive genetic correlation (0.67) between RFI_0–28 and FCR_0–28.

5. In conclusion, selection for increased BW and reduced FI in a selection index could be recommended to improve feed efficiency traits including FCR and RFI in Japanese quail.     

Genetic parameters for carcass traits of field progeny and their relationships with feed efficiency traits of their sire population for Japanese Black cattle

Genetic parameters for carcass traits of 1774 field progeny (1281 steers and 493 heifers), and their genetic relationships with feed efficiency traits of their sire population (740 bulls) were estimated with REML. Feed efficiency traits included feed conversion ratio (FCR) and residual feed intake (RFI). RFI was calculated by the residual of phenotypic (RFI_phe) and genetic (RFI_gen) regression from the multivariate analysis of feed intake on metabolic weight and daily gain. Progeny traits were carcass weight (CWT), rib eye area (REA), rib thickness (RBT), subcutaneous fat, yield estimate (YEM), marbling score (MSR), meat quality grade, meat color, fat color, meat firmness and meat texture. The estimated heritability for CWT (0.70) was high and heritabilities for all the other traits were moderate (ranged from 0.32 to 0.47), except for meat and fat color and meat texture which were low (ranged from 0.02 to 0.25). The high genetic correlation (0.62) between YEM and MSR suggests that simultaneous improvement of high carcass yield and beef marbling is possible. Estimated genetic correlations of RFI (RFI_phe and RFI_gen) of sires with CWT (− 0.60 and − 0.53) and MSR (− 0.62 and − 0.50) of their progeny were favorably negative indicating that the selection against RFI of sires may have contributed to produce heavier carcass and increase in beef marbling. The correlated responses in CWT, REA and RBT of progeny were higher to selection against RFI than those to selection against FCR of sires. This study provides evidence that selection against RFI is preferred over selection against FCR in sire population for getting better correlated responses in carcass traits of their progeny.     

Simultaneous Bayesian estimation of genetic parameters for curves of weight,feed intake,and residual feed intake in beef cattle

Rates of gain and feed efficiency are important traits in most breeding programs for growing farm animals. The rate of gain (GAIN) is usually expressed over a certain age period and feed efficiency is often expressed as residual feed intake (RFI), defined as observed feed intake (FI) minus expected feed intake based on live weight (WGT) and GAIN. However, the basic traits recorded are always WGT and FI and other traits are derived from these basic records. The aim of this study was to develop a procedure for simultaneous analysis of the basic records and then derive linear traits related to feed efficiency without retorting to any approximation. A bivariate longitudinal random regression model was employed on 13,791 individual longitudinal records of WGT and FI from 2,827 bulls of six different beef breeds tested for their own performance in the period from 7 to 13 mo of age. Genetic and permanent environmental covariance functions for curves of WGT and FI were estimated using Gibbs sampling. Genetic and permanent covariance functions for curves of GAIN were estimated from the first derivative of the function for WGT and finally the covariance functions were extended to curves for RFI, based on the conditional distribution of FI given WGT and GAIN. Furthermore, the covariance functions were extended to include GAIN and RFI defined over different periods of the performance test. These periods included the whole test period as normally used when predicting breeding values for GAIN and RFI for beef bulls. Based on the presented method, breeding values and genetic parameters for derived traits such as GAIN and RFI defined longitudinally or integrated over (parts of) of the test period can be obtained from a joint analysis of the basic records. The resulting covariance functions for WGT, FI, GAIN, and RFI are usually singular but the method presented here does not suffer from the estimation problems associated with defining these traits individually before the genetic analysis. All the results are thus estimated simultaneously, and the set of parameters is consistent.     

Genetic relationships between feed efficiency in growing males and beef cow performance

Most studies on feed efficiency in beef cattle have focused on performance in young animals despite the contribution of the cow herd to overall profitability of beef production systems. The objective of this study was to quantify, using a large data set, the genetic covariances between feed efficiency in growing animals measured in a performance-test station, and beef cow performance including fertility, survival, calving traits, BW, maternal weaning weight, cow price, and cull cow carcass characteristics in commercial herds. Feed efficiency data were available on 2,605 purebred bulls from 1 test station. Records on cow performance were available on up to 94,936 crossbred beef cows. Genetic covariances were estimated using animal and animal-dam linear mixed models. Results showed that selection for feed efficiency, defined as feed conversion ratio (FCR) or residual BW gain (RG), improved maternal weaning weight as evidenced by the respective genetic correlations of -0.61 and 0.57. Despite residual feed intake (RFI) being phenotypically independent of BW, a negative genetic correlation existed between RFI and cow BW (-0.23; although the SE of 0.31 was large). None of the feed efficiency traits were correlated with fertility, calving difficulty, or perinatal mortality. However, genetic correlations estimated between age at first calving and FCR (-0.55 ± 0.14), Kleiber ratio (0.33 ± 0.15), RFI (-0.29 ± 0.14), residual BW gain (0.36 ± 0.15), and relative growth rate (0.37 ± 0.15) all suggest that selection for improved efficiency may delay the age at first calving, and we speculate, using information from other studies, that this may be due to a delay in the onset of puberty. Results from this study, based on the estimated genetic correlations, suggest that selection for improved feed efficiency will have no deleterious effect on cow performance traits with the exception of delaying the age at first calving.     

Genetic relationship between different measures of feed efficiency and its component traits in Japanese Black (Wagyu) bulls

Genetic parameters of average daily gain (ADG), metabolic body weight (MWT), body weight at finish (BWF), daily feed intake (DFI), feed conversion ratio (FCR), and residual feed intake (RFI) were estimated in 740 Japanese Black bulls. RFI was calculated as the difference between actual and expected feed intake predicted by the residual of multiple regression (RFI_phe) and genetic regression (RFI_gen) from the multivariate analysis for DFI, MWT, and ADG. The estimations were made for the test periods of 140 days (77 bulls) and 112 days (663 bulls). The mean for RFI_phe was close to zero and RFI_gen was negative. Most of the traits studied were moderately heritable (ranging from 0.24 to 0.49), except for ADG and FCR (0.20 and 0.15, respectively). The genetic correlations among growth traits (ADG, MWT and BWF) and between DFI and growth traits were high, while the phenotypic correlations between them were moderate to high. The genetic and phenotypic correlations between RFI_phe and RFI_gen were > 0.95 implying that they are regarded as the same trait and the genetic correlations of RFI (RFI_phe and RFI_gen) with FCR and DFI were favorably high. RFI_phe was phenotypically independent of its component traits, MWT (r_p = − 0.01) and ADG (r_p = 0.01). RFI_gen was genetically independent of MWT (r_g = − 0.07), while there was a weak genetic relationship (r_g = 0.18) between RFI_gen and ADG. These results provide evidence that RFI_gen should be included for genetic improvement of feed efficiency in Japanese Black breeding program.     

Genetic parameters for measures of energetic efficiency of bulls and their relationships with carcass traits of field progeny in Japanese Black cattle

Records on 514 bulls from the sire population born from 1978 to 2004, and on 22,099 of their field progeny born from 1997 to 2003 with available pedigree information (total number = 124,458) were used to estimate genetic parameters for feed intake and energy efficiency traits of bulls and their relationships with carcass traits of field progeny. Feed intake and energetic efficiency traits were daily feed intake, TDN intake, feed conversion ratio (FCR), TDN conversion ratio (TDNCR), residual feed intake (RFI), partial efficiency of growth, relative growth rate, and Kleiber ratio. Progeny carcass traits were carcass weight (CWT), yield estimate, ribeye area, rib thickness, subcutaneous fat thickness (SFT), marbling score (MSR), meat color standard (MCS), fat color standard (FCS), and meat quality grade. All measures of feed intake and energetic efficiency were moderately heritable (ranged from 0.24 to 0.49), except for partial efficiency of growth and relative growth rate, which were high (0.58) and low (0.14), respectively. The phenotypic and genetic correlations between FCR and TDNCR were >or=0.93. Selection for Kleiber ratio will improve all of the energetic efficiency traits with no effect on feed intake measures (daily feed intake and TDN intake). The genetic correlations of FCR, TDNCR, and RFI of bulls with most of the carcass traits of their field progeny were favorable (ranged from -0.24 to -0.72), except with fat color standard (no correlation), MCS, and SFT. Positive (unfavorable) genetic correlations of MCS with FCR, TDNCR, and RFI (0.79, 0.70, and 0.51, respectively) were found. The SFT was negatively genetically correlated with FCR and TDNCR (-0.32 and -0.20, respectively); however, the genetic correlation between RFI and SFT was not significantly different from zero (r(g) = -0.08 +/- 0.12). Favorable correlated responses in CWT, yield estimate, ribeye area, rib thickness, MSR, and meat quality grade would be predicted for selection against any measure of energetic efficiency. The correlated responses in CWT and MSR of progeny were greater for selection against RFI than for selection against any other energetic efficiency trait. Results of this study indicate that RFI should be preferred over other measures of energetic efficiency to include in selection programs.     

Genetic relationship of feed efficiency traits of bulls with growth and carcass traits of their progeny for Japanese Black (Wagyu) cattle

Genetic parameters for feed efficiency traits of 740 Wagyu bulls and growth and carcass traits of 591 of their progeny, and the genetic relationship between the traits of bulls and their progeny were estimated with the residual maximum likelihood procedure. The estimations were made for the test periods of 140 days (77 bulls), 112 days (663 bulls) and 364 days (591 steer progeny). Feed efficiency traits of bulls included feed conversion ratio (FCR), phenotypic residual feed intake (RFI_phe) and genetic residual feed intake (RFI_gen). Progeny traits were bodyweight at the start of the test (BWS), bodyweight at finish (BWF), average daily gain (ADG), rib eye area (REA), marbling score (MSR), dressing percentage (DRS) and subcutaneous fat thickness (SFT). The estimated heritability for MSR (0.52) was high and for BWS (0.35), BWF (0.40) and ADG (0.30) were moderate, whereas REA, DRS and SFT were low. Positive genetic correlations among BWS, BWF, ADG and SFT and negative genetic correlations between MSR and DRS and between REA and SFT were found. The genetic correlations between residual feed intake (RFI_phe and RFI_gen) of bulls and bodyweights (BWS and BWF) of their progeny ranged from ?0.27 to ?0.61. Residual feed intake was positively correlated with REA and DRS and negatively correlated with MSR and SFT. No responses in ADG and weakly correlated responses in REA and DRS of progeny were found to select against feed efficiency traits of bulls. The present experiment provides evidence that selection against lower RFI (higher feed efficiency) would be better than selection against lower FCR for getting better correlated responses in bodyweights.     

Variance components due to direct genetic, maternal genetic and permanent environmental effect for growth and feed-efficiency traits in young male Japanese Black cattle

Variance components and genetic parameters were estimated using data recorded on 740 young male Japanese Black cattle during the period from 1971 to 2003. Traits studied were feed intake (FI), feed‐conversion ratio (FCR), residual feed intake (RFI), average daily gain (ADG), metabolic body weight (MWT) at the mid‐point of the test period and body weight (BWT) at the finish of the test (345 days). Data were analysed using three alternative animal models (direct, direct + maternal environmental, and direct + maternal genetic effects). Comparison of the log likelihood values has shown that the direct genetic effect was significant (p < 0.05) for all traits and that the maternal environmental effects were significant (p < 0.05) for MWT and BWT. The heritability estimates were 0.20 ± 0.12 for FI, 0.14 ± 0.10 for FCR, 0.33 ± 0.14 for RFI, 0.19 ± 0.12 for ADG, 0.30 ± 0.14 for MWT and 0.30 ± 0.13 for BWT. The maternal effects (maternal genetic and maternal environmental) were not important in feed‐efficiency traits. The genetic correlation between RFI and ADG was stronger than the corresponding correlation between FCR and ADG. These results provide evidence that RFI should be included for genetic improvement in feed efficiency in Japanese Black breeding programmes.     

Cluster and meta‐analyses of genetic parameters for feed intake traits in growing beef cattle

A data set based on 50 studies including feed intake and utilization traits was used to perform a meta‐analysis to obtain pooled estimates using the variance between studies of genetic parameters for average daily gain (ADG); residual feed intake (RFI); metabolic body weight (MBW); feed conversion ratio (FCR); and daily dry matter intake (DMI) in beef cattle. The total data set included 128 heritability and 122 genetic correlation estimates published in the literature from 1961 to 2012. The meta‐analysis was performed using a random effects model where the restricted maximum likelihood estimator was used to evaluate variances among clusters. Also, a meta‐analysis using the method of cluster analysis was used to group the heritability estimates. Two clusters were obtained for each trait by different variables. It was observed, for all traits, that the heterogeneity of variance was significant between clusters and studies for genetic correlation estimates. The pooled estimates, adding the variance between clusters, for direct heritability estimates for ADG, DMI, RFI, MBW and FCR were 0.32 ± 0.04, 0.39 ± 0.03, 0.31 ± 0.02, 0.31 ± 0.03 and 0.26 ± 0.03, respectively. Pooled genetic correlation estimates ranged from ?0.15 to 0.67 among ADG, DMI, RFI, MBW and FCR. These pooled estimates of genetic parameters could be used to solve genetic prediction equations in populations where data is insufficient for variance component estimation. Cluster analysis is recommended as a statistical procedure to combine results from different studies to account for heterogeneity.     

Genetic parameters for residual feed intake in growing pigs, with emphasis on genetic relationships with carcass and meat quality traits

Data were collected over the first 4 generations of a divergent selection experiment for residual feed intake of Large White pigs having ad libitum access to feed. This data set was used to obtain estimates of heritability for residual feed intake and genetic correlations (r(a)) between this trait and growth, carcass, and meat quality traits. Individual feed intake of group-housed animals was measured by single-space electronic feeders. Upward and downward selection lines were maintained contemporarily, with 6 boars and 35 to 40 sows per line and generation. Numbers of records were 793 for residual feed intake (RFI1) of boar candidates for selection issued from first-parity (P1) litters and tested over a fixed BW range (35 to 95 kg) and 657 for residual feed intake (RFI2) and growth, carcass, and meat quality traits of castrated males and females issued from second-parity (P2) litters and tested from 28 to 107 kg of BW. Variance and covariance components were estimated using REML methodology applied to a series of multitrait animal models, which always included the criterion for selection as 1 of the traits. Estimates of heritability for RFI1 and RFI2 were 0.14 +/- 0.03 and 0.24 +/- 0.03, respectively, whereas the estimate of r(a) between the 2 traits was 0.91 +/- 0.08. Estimates of r(a) indicated that selection for low residual feed intake has the potential to improve feed conversion ratio and reduce daily feed intake, with minimal correlated effect for ADG of P2 animals. Estimates of r(a) between RFI2 and body composition traits of P2 animals were positive for traits related to the amount of fat depots (r(a) = 0.44 +/- 0.16 for carcass backfat thickness) and negative for carcass lean meat content (r(a) = -0.55 +/- 0.14). There was a tendency for a negative genetic correlation between RFI2 and carcass dressing percent (r(a) = -0.36 +/- 0.21). Moreover, selection for low residual feed intake is expected, through lower ultimate pH and lighter color, to decrease pork quality (r(a) = 0.77 +/- 0.14 between RFI2 and a meat quality index intended to predict the ratio of the weight of ham after curing and cooking to the weight of defatted and boneless fresh ham).     

Divergent selection for postweaning feed conversion in beef cattle: predicted response based on an index of feed intake and gain vs fee: gain ratio

As part of a divergent selection experiment (high vs low feed conversion) designed to obtain realized genetic parameter estimates for postweaning feed conversion, 35 Angus bull calves were selected each year from 1979 through 1983 to be fed in a 140-d postweaning performance test. From these 35 individually-fed bulls, the three most efficient and three least efficient (in terms of kilograms of total digestible nutrients required per kilogram of gain) were selected each year to each be mated to approximately 20 purebred Angus cows in a test herd. In the last 2 yr of the experiment, feed:gain ratios were adjusted for differences in maintenance requirements before selection. An alternative to selection based on feed/gain or adjusted feed/gain would have been to select on an index of feed intake and gain (Index3 = -1.0 feed intake + 3.87 gain) where feed intake was either unadjusted or adjusted (AdjIndex3) for differences in maintenance requirements. Residual correlations (year effects removed) among the four selection critera were large ([r[ greater than or equal to .76; P less than .01) as were correlations among ranks of the bulls based on the four selection criteria ([r[ greater than or equal to .75). Predicted genetic change for fee:gain ratio in both the high and low directions was greatest when selection was based on feed:gain ratio or Index3. Genetic changes expected to result from selection for feed:gain ratio or Index3 were similar, as were genetic changes expected due to selection for adjusted feed:gain ratio or AdjIndex3.(ABSTRACT TRUNCATED AT 250 WORDS)