Properties of Starches from Near‐Isogenic Wheat Lines with Different Wx Protein Deficiencies

To determine the effect of amylose content on the starch properties, the amylose content, pasting properties, swelling power, enzymatic digestibility, and thermal properties of partial and perfect waxy types along with their wild‐type parent were analyzed. As expected, amylose content decreases differently in response to the loss of each Wx gene, showing the least response to Wx‐A1a. Most of the characteristics, except the thermal properties of the amylose‐lipid complex in differential scanning calorimetry (DSC), differed significantly among the tested types. Furthermore, the breakdown, setback, and pasting temperatures from the Rapid Visco Analyser (RVA) and the enzymatic digestibility, swelling power, peak temperature, and enthalpy of starch gelatinization from DSC showed a correlation with the amylose content. The relationships between the peak viscosity from the RVA and the onset temperature of starch gelatinization determined by DSC with amylose content of the tested materials were not clear. Waxy starch, which has no amylose, showed a contrasting behavior in starch gelatinization compared with nonwaxy starches. Among the nonwaxy starches, lower setback, lower pasting temperature, higher enzyme digestibility, higher peak temperature, higher enthalpy of starch gelatinization, and higher swelling were generally associated with low amylose starches.     

Application of the Rapid Visco Analyzer (RVA) as an Effective Rheological Tool for Measurement of β‐Glucan Viscosity

The physiochemical characteristics of β‐glucan in oat and barley foods can affect human physiological response. A method for continuous measurement of β‐glucan viscosity with a Rapid Visco Analyzer (RVA) was developed to overcome the complexity of the common protocols based on in vitro digestion methods. The effects of several parameters on viscosity and solubility were considered. Oat cereal foods showed different RVA viscosity profiles depending on their physiochemical characteristics. Products high in starch exhibited a high initial viscosity that was reduced by α‐amylase action, whereas products with low amounts of starch exhibited a slow increase in viscosity. The viscosity of all samples reached a plateau in the viscosity curve after 1–2 hr, which is the key for obtaining reproducible results. Optimum digestion condition was achieved using sodium phosphate buffer (pH 6.9) and 1% β‐glucan dispersion at 37°C and 160 rpm. A particle size of <0.6 mm gave more consistent viscosities than did larger particles without affecting the solubility of β‐glucan. Pancreatin and α‐amylase concentrations affected the viscosity profile by influencing the digestion rate of protein and starch in the samples, but pepsin had limited influence at pH 6.9. Highly significant Pearson correlation between the in vitro digestibility protocol and RVA methods was achieved, indicting that the developed method could be used as an effective alternative for measurement of β‐glucan viscosity.     

Octenyl succinic anhydride modified early indica rice starches differing in amylose content

Seven early indica rice starches with different amylose contents were modified by octenyl succinic anhydride (OSA) in aqueous suspension systems to evaluate the effect of amylose contents on starch esterification. The crystalline structure and pasting properties of starches were investigated using X-ray diffraction and a Rapid Visco Analyzer (RVA). The results indicated that the amylose content had a positive impact on the OSA modification. As the amylose content increased from 0 to 39.6%, the degree of substitution increased from 0.024 to 0.030 and the reaction efficiency increased from 62.8 to 77.5%. X-ray diffraction scans confirmed that the amylose was mainly present in the amorphous domain of the granule and was highly substituted after the OSA treatment. The RVA profiles demonstrated that the OSA starches had higher viscosities than their native counterparts. Moreover, negative correlations were observed between the amylose content and the major RVA parameters (e.g., peak viscosity, hot paste viscosity, cool paste viscosity, and breakdown viscosity).     

Impact of Proteins on Pasting and Cooking Properties of Nonparboiled and Parboiled Rice

The role of proteins in the pasting and cooking properties of non‐parboiled (npb) and parboiled (pb) rice was tested by means of a reducing agent dithiothreitol (DTT) and a protease (trypsin). DTT increased the swelling power and carbohydrate leaching of flour from npb rice flour but decreased its amylose leaching. Although DTT slightly increased the Rapid Visco Analyser (RVA) viscosity at the initial stages of the pasting process, it decreased RVA viscosity in the further phases of the experiment. Preincubation of flour with a trypsin decreased RVA viscosity along the whole temperature profile. Addition of DTT to the cooking water decreased water absorption and rice hardness and increased leaching of solids during cooking and stickiness of the cooked npb rice. Addition of DTT to the cooking water of flour from pb rice increased swelling power, carbohydrate leaching, and amylose leaching. Addition of DTT also increased RVA viscosity. Preincubation with trypsin had a similar effect but the changes were less pronounced. Addition of DTT increased stickiness of cooked pb rice and increased water absorption and leaching of solids during cooking. Taken together, the results provide evidence for the existence of a protein barrier affecting starch swelling, rheological, and cooking properties of both npb and pb rice.     

Pasting Characteristics of Maize Starch Heat‐Treated with Different Water‐Ethanol Mixtures

Pasting characteristics of maize starch heat‐treated with six different water‐to‐ethanol ratios (%wt base 0:100, 10:90, 20:80, 30:70, 40:60, 50:50) were investigated; treated starches were called EW 0, 10, 20, 30, 40, and 50, respectively. Endotherms in DSC analysis shifted to a higher temperature as the water content in water‐ethanol mixture increased. The removed amount of fatty acids was much higher in treatments for EW 10, 20, and 30. The RVA peak viscosity of EW 10 and 20 were highest among the treated starches and setbacks were more than twice that of untreated starch. The characteristic change in the RVA viscogram corresponded to the amount of leached amylose from the granule. EW 30 displays similar properties as conventional heat‐moisture‐treated starch, but maintained a higher viscosity of ≈300 RVU throughout the heating process. In treatment with water‐ethanol mixtures, heat‐moisture treatment and defatting effects generated new types of modified starches. EW 40 and 50 had no clear pasting peak on RVA, and showed a viscosity at low temperature similar to granular cold water gelling.     

Functionality Behavior of Raw and Extruded Corn Starch Mixtures

Relationships between the structural properties of raw and extruded corn starches and their functionalities were investigated using mixtures of these starch types. Extruded starch had higher water absorption and water solubility indices, and produced lower RVA viscosity profiles when compared with raw starch. It also had no differential scanning calorimetry (DSC) endotherm. Gel cohesiveness and adhesiveness of both starch types were similar, while extruded starch gels were softer. Extruded starch produced lower Rapid Visco Analyser (RVA) viscosity profiles than raw starch due to starch degradation during extrusion. The raw and extruded starch components had negative interaction coefficients, thus RVA viscosity parameters were lowered as the fraction of extruded starch in the mixture increased. Starch degradation in the extruded starch was a likely significant factor associated with low viscosity profiles. Mixtures of raw and extruded starches could be commercially prepared to obtain finished starch products with a range of functional attributes.     

Effect of Amylose Content on Gelatinization,Retrogradation, and Pasting Properties of Starches from Waxy and Nonwaxy Wheat and Their F1 Seeds

We studied the effect of amylose content on the gelatinization, retrogradation, and pasting properties of starch using wheat starches differing in amylose content. Starches were isolated from waxy and nonwaxy wheat and reciprocal F1 seeds by crossing waxy and nonwaxy wheat. Mixing waxy and nonwaxy wheat starch produced a mixed starch with the same amylose content as F1 seeds for comparison. The amylose content of F1 seeds ranged between waxy and nonwaxy wheat. Nonwaxy‐waxy wheat had a higher amylose content than waxy‐nonwaxy wheat. Endothermic enthalpy and final gelatinization temperature measured by differential scanning calorimetry correlated negatively with amylose content. Gelatinization onset and peak temperature clearly differed between F1 and mixed starches with the same amylose content as F1 starches. Enthalpy for melting recrystallized starches correlated negatively with amylose content. Rapid Visco Analyser measurement showed that F1 starches had a higher peak viscosity than waxy and nonwaxy wheat starches. Mixed starches showed characteristic profiles with two low peaks. Setback and final viscosity correlated highly with amylose content. Some of gelatinization and pasting properties differed between F1 starches and mixed starches.     

Effects of Phosphate Salts on the pH Values and Rapid Visco Analyser (RVA) Pasting Parameters of Wheat Flour Suspensions

Changes in pH and pasting properties of instant‐noodle formula dry‐mix suspensions containing each of 12 phosphate salts were investigated. The pH values of solutions alone and then solution and flour suspensions decreased as the level of phosphate salts increased, except that of trisodium phosphate, which increased the pH value. The changes in the Rapid Visco Analyser (RVA) pasting parameters of instant‐noodle formula suspensions were not consistent with the respective changes in pH, but the change trends of the RVA parameters for the two different wheat flours (hard red winter and soft white wheat) were similar. Five of the phosphate salts gradually increased the RVA peak viscosity (PV) as phosphate concentration increased. Seven other phosphate salts increased the PV at 0.05% and then decreased PV as the phosphate concentration increased. The change in trough viscosity owing to phosphate salt and concentration was similar to that of PV. The final viscosity (FV) gradually declined, to varying degrees, as the phosphate concentration increased for some of the phosphate salts. However, seven of the phosphate salts caused slight increases in FV as their concentrations increased. The response of starch gelatinization and pasting behavior, as measured by RVA, indicated that phosphate salts exert an influence on starch during heating in water. Because RVA parameters have been linked to instant‐noodle processing and textural properties, phosphate salt identity and concentration can likely be manipulated to affect end‐product quality.     

Effect of Laboratory Batch Steeping pH on Starch Yield and Pasting Properties of Selected Corn Hybrids

This study evaluated the effect of initial pH on percent of starch yield and pasting characteristics for a laboratory wet‐milling procedure. Four commercial hybrids, selected because they have significantly different starch yield values, were laboratory wet‐milled, and the pasting properties of the starch fractions were evaluated using a Rapid Visco Analyser (RVA). Percent starch yield (db) decreased when initial pH values were >4.0 but was unaffected by any lower initial pH values. The pasting properties of some of the selected hybrids were more sensitive to steepwater pH than others. There was an overall increase in peak, trough, and final viscosity as pH increased.     

Rheological and physicochemical properties of starches from moist- and dry-type sweetpotatoes

Although starch makes up from 50 to 70% of sweetpotato (SP) dry matter, its role in cooked texture is unknown. The purpose of this research was to characterize raw starches isolated from SP cultivars and experimental selections (C/S) with a wide range of textural properties when cooked and to investigate the relationship between textural properties of the cooked roots and characteristics of the isolated starches. Shear stress measured by uniaxial compression of cooked SP cylinders served as an objective measure of SP texture. Starches were isolated from C/S representing three SP texture types: moist (Jewel and Beauregard); intermediate (NC10-28 and NC2-26); and dry (NC6-30 and NC8-22). The following parameters of isolated starches were measured: amylose content by colorimetric and differential scanning calorimetric (DSC) methods; swelling power, solubility, gelatinization enthalpy (DeltaH), and pasting properties by Brabender amylograph (BA) and rapid viscoanalyzer (RVA). Pasting temperatures for SP C/S measured by BA and RVA were significantly correlated. Due to high shear degradation in RVA, RVA viscosities of starch suspensions decreased as much as 40% during cooking at 95 degrees C, whereas the BA viscosities changed little at this temperature. There were no statistically significant differences among the C/S for amylose or DeltaH. However, significant C/S differences in swelling power, solubility, and pasting properties were observed. Although differences in some rheological and physical properties were observed for C/S starches, shear stress was statistically correlated only with DSC onset temperature (r = 0.78), indicating that factors other than the properties measured on isolated starches are mainly responsible for the texture of cooked SP C/S.     

Determination of Rapid Visco Analyser Parameters in Rice by Near‐Infrared Spectroscopy

The objective of these studies was to find alternative Rapid Visco Analyser (RVA) viscoelastic parameters that are predictable by near‐infrared spectroscopy (NIRS). Currently, RVA instruments are widely used in assessing cooking and processing characteristics in rice. The ability to predict RVA parameters by NIRS would be useful in rapidly determining rice pasting qualities, but NIRS does not correlate with the traditional parameters (peak viscosity, final viscosity, breakdown, consistency, and setback). Alternative RVA parameters were sought by collecting RVA and NIRS data for a total of 86 short, medium, and long grain rice cultivars. The amylose contents were 0.41–24.90% (w/w) and protein concentrations were 8.47–11.35% (w/w). Partial least squares (PLS) regression models generated for the entire NIR spectrum against the RVA curve showed viscosity at 212–228 sec (80°C ± 1) varied linearly with NIR spectra (1,100 to ‐2,500 nm). Regression coefficient values were R = 0.961 for 212 sec and R = 0.903 for 228 sec. The PLS correlation coefficient for the prediction of amylose at 212–228 sec decreases along with the NIRS correlation to the same time frame. An opposite trend was observed for the correlation with protein at 212–228 sec. This comparison suggests the importance of amylose and protein in water absorption during this time frame.     

Role of Phosphorus in Viscosity,Gelatinization, and Retrogradation of Starch

The effect of starch crystallinity and phosphorus on starch gelatinization and retrogradation were studied using wide-angle X-ray powder diffraction, cross polarization/magic angle spinning (CP/MAS) ¹³C nuclear magnetic resonance (NMR) spectroscopy, ³¹P NMR spectroscopy, Rapid Visco Analyzer (RVA) and differential scanning calorimetry (DSC). Two starches differing significantly in peak viscosity (cv. Stephens, 283 BU; cv. Crew, 560 BU) were comparable in amylose content and starch crystallinity, while differing significantly in phospholipids content. Starch of lower peak viscosity had a higher phospholipids content and showed a slower rate of retrogradation. Starch from Stephens (0.098% phosphorus) had an enthalpy value of retrograded starch of 2.2 J/g after 14 days of storage, while starch from Crew (0.062% phosphorus) had an enthalpy value as high as 4.4 J/g. Defatting with a hot n-propanol and water (3:1) mixture caused substantial changes in peak viscosity. Peak viscosity for starch from Crew decreased by 75 RVU due to defatting, while starch from Stephens decreased by as much as 125 RVU. After defatting with the hot n-propanol water mixture, the rate and extent of starch retrogradation were comparable between the prime starches, which differed significantly in peak viscosity.     

Properties of Cross‐Linked Starch from Waxy Mutant Wheat Tanikei A6599‐4

Native starch from waxy mutant wheat Tanikei A6599‐4 is known to exhibit more stable hot paste viscosity than a typical waxy wheat (Tanikei H1881) and waxy corn. The objective of this study was to investigate the starch paste properties of Tanikei A6599‐4 after cross‐linking and compare with Tanikei H1881 and waxy corn. As an example of cross‐linking, the reaction (at 30, 60, 120, and 360 min) with sodium trimetaphosphate was used. In Rapid Visco Analyser (RVA) measurement, the unique characteristic was maintained in Tanikei A6599‐4 starch cross‐linked at low reaction time (<120 min) levels. Cross‐linking at a high reaction time (360 min) level suppressed the swelling of both Tanikei A6599‐4 and Tanikei H1881 starches but not waxy corn starch. Although unmodified Tanikei A6599‐4 starch showed the lowest paste clarity among unmodified waxy starches, this defect became unremarkable when starch was cross‐linked for ≥120 min. In gel‐dispersed dynamic viscoelasticity measurement, the order of G′ and G″ values was always Tanikei A6599‐4 > Tanikei H1881 > waxy corn. This indicates that cross‐linked Tanikei A6599‐4 and Tanikei H1881 starches have different starch properties and that swollen Tanikei A6599‐4 starch granules are more rigid than swollen Tanikei H1881 starch granules.     

Starch Pasting Properties and Amylose Content from 17 Waxy Barley Lines

Starch pasting properties and amylose content from 17 waxy barley lines (waxy gene originating from indigenous lines and an artificial mutant) were analyzed using rapid viscosity analysis (Rapid Visco Analyser [RVA]). Amylose contents varied from 0% (Shikoku‐hadaka 97) to 9.5% (Shikoku‐hadaka 96) compared with 30% for normal barley. Eight parameters were obtained from RVA profiles of these lines and correlation between each of these parameters and amylose content were evaluated. These parameters include pasting temperature (PT), peak viscosity (PV), temperature at PV, minimum viscosity (MV), final viscosity (FV), breakdown (BD), setback (SB), and time maintained at >80% PV (hot paste stability [HPS]). Significant correlations (0.64 and 0.61) were found between amylose content and FV and SB, respectively. High correlation (0.72) was found between amylose content and temperature at PV. HPS calculated from RVA profiles showed the highest correlation (0.79) to amylose content. Outer part of barley grains contained higher amounts of amylose than the inner part. There was a tendency that both PT and FV positively correlated to the amylose content of these parts.     

Increase in Apparent Amylose Content and Change in Starch Pasting Properties at Cool Growth Temperatures in Mutant Wheat

Some mutant wheat lines with low‐amylose content were grown in a field and greenhouse (15 or 20°C) to compare apparent amylose content and starch pasting properties. The apparent amylose content of flour and starch increased and starch pasting parameters as measured by a Rapid Visco Analyser (RVA) changed in the greenhouse (at cool temperatures) during seed maturation. Densitometric analysis of the protein band separated by electrophoresis suggested that the increase in amylose content by cool temperature was related to the amount of Wx‐D1 protein. This data suggests that the Wx‐D1 gene was responsible for these changes. In wheat starch from Tanikei A6099 and Tanikei A6598 at 15°C, the value of final viscosity and total setback was higher than that from the field. In wheat starch from Tanikei A6599‐4 (waxy mutant with stable hot paste viscosity), the peak viscosity temperature was higher and time maintained >80% of the peak was shorter at 15°C than that from the field. Genetic analysis using doubled‐haploid (DH) lines from a combination of Tanikei A6599‐4 and Kanto 118 (low‐amylose line) showed that apparent amylose content increased and the starch pasting curve and properties changed in waxy progenies similar to Tanikei A6599‐4.     

Effects of Genotype and Environment on the Starch Properties and End‐Product Quality of Oats

Five Canadian oat genotypes were grown at six environments in Manitoba to assess the effects of genotype, environment, and genotype‐by‐environment interaction on oat starch properties and end‐product quality. Genotypic variation was significant for total starch, amylose content, starch swelling volume (SSV), Rapid Visco Analyser (RVA) pasting viscosities, differential scanning calorimetry (DSC) thermal properties, and starch gel texture as well as the quality of flakes and cooked oatmeal made by laboratory‐scale methodologies. Environment was the dominant factor contributing to the total variation of starch content, RVA pasting viscosities, SSV, and DSC thermal properties. Most measurements of starch gel and oatmeal texture were not affected by growing environment. Cross‐over analysis revealed that changes in the ranking of genotypes across environments occurred for starch RVA hot paste, breakdown and shear thinning viscosities, work of gel compression, flake hydration capacity, and the proportion of large flakes, indicating that breeding for these traits would require multiple testing sites. Trends were observed between oatmeal texture and several flake and starch gel properties, warranting further study. Results of this study indicated that there is a potential to breed Canadian oat cultivars with improved functional end‐product quality for use in the milling and food manufacturing industries.     

Properties of Starch Noodles as Affected by Sweetpotato Genotype

Starch was extracted from 14 sweetpotato genotypes from the Philippines. The Rapid Visco-Analyzer (RVA) viscoamylographs of the starches showed Type A pasting curves, characterized by a high pasting peak followed by a high degree of shear-thinning. The major difference among genotypes was in the sharpness of the peak, with some showing a very sharp peak while others showed a broad peak. This difference was related to time from onset of pasting to peak viscosity, and to stability ratio (holding viscosity/peak viscosity), which were also highly correlated (r = 0.84, P < 0.01) to each other. Stability ratio was also correlated to noodle firmness (r = 0.95, P < 0.01), rehydration (cooked weight) (r = -0.89, P < 0.01), and swelling volume of the starch (r = -0.62, P < 0.05). The amylose content was correlated significantly only to peak viscosity (r = -0.84, P < 0.01). Significant differences in texture and cooking quality of the starch noodles produced from the different genotypes was found. It was shown that the RVA viscoamylographs could be used to detect differences in pasting characteristics of sweetpotato starch which are related to quality of noodle produced.     

Assessing Fermentation Quality of Grain Sorghum for Fuel Ethanol Production Using Rapid Visco‐Analyzer

The Rapid Visco‐Analyzer (RVA) was used to characterize the pasting properties of 68 sorghum grains with a standard 23‐min temperature profile. The results showed a strong linear relationship between ethanol yield and final viscosity as well as setback. Ethanol yield increased as final viscosity decreased. A modified RVA procedure (10 min) with an application of α‐amylase was developed to simulate the liquefaction step in dry‐grind ethanol production. There was a remarkable difference in mashing properties among the sorghum samples with the normal dosage of α‐amylase. The sorghum samples which were difficult to liquefy in the mashing step had much higher peak viscosities than the samples that were easily liquefied. The results also showed that the relationship between conversion efficiency and mashing property was significant. Tannins cause high mash viscosities. There was a strong linear relationship between tannin content and final viscosity as well as peak viscosity. The modified RVA procedure is applicable not only for characterization of mashing properties but also for optimization of α‐amylase doses for starch liquefaction.     

Effect of Surfactant Structure on the Pasting Properties of Wheat Flour and Starch Suspensions

Systematic studies were performed on the effect of the surfactant alkyl chain length (10–16 carbon atoms) and the head group charge/structure (anionic, cationic, nonionic) on the pasting properties of wheat flour and starch aqueous suspensions by means of a Rapid Visco Analyser (RVA). An excellent agreement was observed between the effect of surfactants on the onset temperature of the pasting process (PT) and the time to reach peak viscosity (t_peak) of wheat flour and wheat starch suspensions. Moreover, a correlation was found between the effect of different surfactants on these two parameters. With the exception of the cationic surfactants (alkyl trimethyl ammonium bromides), the effect of surfactants (alkyl sulfates, maltosides, monoglycerides, and sucrose esters) was found to be strongly dependent on the surfactant chain length. Shorter chain surfactants (C10–C12) induced an earlier pasting, while longer chain surfactants (C14–C16) had the opposite effect. The effect of surfactants on PT and t_peak of flour suspensions was enlarged when the surfactant concentration was increased from ≈1% to 15% (w/w) on a dry starch basis.     

Influence of Annealing on Gel Properties of Mung Bean Starch

Mung bean starch gels (8% solids) were prepared after annealing at 45–60°C for 1–24 hr, and the relationship between the physical properties of gels and the swelling power (SP) and solubility of starch was investigated. The SP and solubility decreased with increasing annealing temperature and time, mostly in the first 6 hr. The solubles were mainly composed of amylose. Gel hardness at a 5 mm depth of annealed starch was larger than that of native starch, and gel hardness increased as SP decreased (r = ‐0.94). Upon continued compression, the yield force of gel showed a different function. Above SP of ≈12.5, the yield force of annealed starch gels decreased, but at <12.5 the yield force increased with increasing SP. Both granular rigidity and extent of packing appeared to determine the yield force. Although annealing increased the gel hardness, α‐amylase digestibility of gel was not affected. Pasting analysis in the Rapid Visco Analyser (RVA) revealed that annealing increased pasting temperature. A pasting peak was found only in 45 and 50°C annealed starches. Overall paste viscosities of the starches annealed at >55°C were lower than that of the control starch. Final viscosities in RVA were correlated with the yield force of gel (r = 0.99).