Effects of Commercial Hydrolytic Enzyme Additives on Japanese‐Style Sponge and Dough Bread Properties and Processing Characteristics

The effects of increasing levels of eight commercial fungal enzymes enriched in four types of activity (α‐amylase, protease, xylanase, or cellulase) on Japanese‐style sponge and dough bread quality and processing characteristics have been studied using a Canadian red spring wheat straight‐grade flour. At optimum levels, the enriched α‐amylases, xylanases, and cellulases increased loaf volume and bread score and reduced crumb firmness, while the proteases only reduced crumb firmness. For α‐amylases, xylanases, and cellulases, optimum levels for crumb firmness were obtained at higher levels of addition than for loaf volume and bread score. At high levels of addition, all four enriched enzyme types reduced loaf volume and bread score and increased crumb firmness relative to optimum levels, with the proteases showing the most dramatic effects. α‐Amylases and cellulases had little impact on dough mixing requirements, while xylanases increased and proteases greatly reduced mixing requirements. All enzymes at optimum levels reduced sheeting work requirements, resulting in softer more pliable dough. Optimum bread properties for α‐amylases, xylanases, and cellulases were attained within a relatively narrow range of dough sheeting work values. This similarity in response suggests a dominant common nonspecific mechanism for their improver action, which is most likely related to water release and the resulting impact on physical dough properties.     

Effects of Falling Number Sample Weight on Prediction of α‐Amylase Activity

Reports vary on the effects of falling number (FN) sample weight on test precision, reproducibility, and predictability of α‐amylase activity. Straight grade flours of 200 samples (25 cultivars × 2 locations × 2 N₂ levels × 2 repetitions) were assayed for α‐amylase activity and FN. Location significantly affected α‐amylase activity and FN values. The coefficients of variation (CV) for the FN tests were 5.75, 2.12, 1.93, 1.72, 4.27, and 14.47%, when assayed with sample weights of 7, 6, 5.5, 5, 4.5, and 4 g, respectively. The FN test with the greatest reproducibility between sample replicates (lowest LSD and highest ratio of range/LSD) was also produced using the 5‐g sample weight. By reducing FN sample weight from 7 to 5 g, FN values that averaged 350 sec, considered essentially sound, averaged 215 sec, thus shortening the FN test time by an average of 2 min and 15 sec when assaying sound wheat flour. The results suggest a review of the 7‐g stipulation of AACC Approved Method 56‐81B for FN in favor of reduced sample weight.     

Staling of Bread as Affected by Waxy Wheat Flour Blends

Crumb softness and improved shelf life of bread is often achieved by incorporating expensive shortenings in the formulation. We hypothesized that similar results could be achieved by blending bread wheat flour with waxy (low amylose) durum wheat flour. White pan bread was baked from 10, 20, and 30% waxy durum wheat flour composites and evaluated for loaf volume and crumb firmness over a period of 0, 3, and 5 days. The loaf volumes were not affected by the waxy flour blends. However, as staling progressed over 3–5 days, significant firming of crumb was observed in the control sample compared with loaves containing waxy flour. The firmness was inversely proportional to the level of waxy flour used in the blend. A 20% waxy wheat flour blend was optimal in retarding staling while producing bread quality comparable with the control. It was further established that bread made with 20% waxy flour gave lower firmness values after 5 days of storage in comparison to bread made with 3% shortening. These results suggest that 20% waxy wheat flour could substitute for use of shortening to achieve desirable crumb softness and to retard staling upon storage.     

Effects of Flour Strength,Baking Absorption,and Processing Conditions on the Structure and Mechanical Properties of Bread Crumb

The objective of this study was to determine the effects of flour type, baking absorption, variation in sheeting, and dough proofing time on the density, crumb grain (visual texture), and mechanical properties (physical texture) of bread crumb. All response variables were measured on the same bread crumb specimens. Bread loaves were prepared by a short‐time bread‐making process using four spring wheat flours of varying strength. After crumb density measurement, digital image analysis (DIA) was used to determine crumb grain properties including crumb brightness, cell size, cell wall thickness, and crumb uniformity. Tensile tests were performed on bone‐shaped specimens cut from the same bread slices used for DIA to obtain values for Young's modulus, fracture stress, fracture strain, and fracture energy. Proof time had the most profound influence on the bread with substantial effects on loaf volume, crumb density, crumb brightness, and grain, as well as crumb mechanical properties. Increasing proof time resulted in higher loaf volume, lower crumb density and brightness, coarser crumb with fewer and larger cells with thicker cell walls, and weaker crumb tensile properties. Varying flour type also led to significant differences in most of the measured crumb parameters that appeared to correspond to differences in gluten strength among the flour samples. With increasing flour strength, there was a clear trend to increasing loaf volume, finer and more uniform crumb grain, and stronger and more extensible bread crumb. Increasing baking absorption had virtually no effect on crumb structure but significantly weakened crumb strength and increased fracture strain. In contrast, varying the number of sheeting passes had a minor effect on crumb cellular structure but no effect on mechanical properties. The experimental data were consistent with a cause‐effect relationship between flour strength and the tensile strength of bread crumb arising as a result of stronger flours exhibiting greater resistance to gas cell coalescence, thereby having fewer crumb defects.     

Fermented Sorghum as a Functional Ingredient in Composite Breads

Whole sorghum flour was fermented (a five‐day natural lactic acid fermentation) and dried under forced draught at 60°C, and evaluated for its effect on sorghum and wheat composite bread quality. In comparison with unfermented sorghum flour, fermentation decreased the flour pH from 6.2 to 3.4, decreased total starch and water‐soluble proteins, and increased enzyme‐susceptible starch, total protein, and the in vitro protein digestibility (IVPD). Fermentation and drying did not decrease the pasting temperature of sorghum flour, but slightly increased its peak and final viscosity. In comparison with composite bread dough containing unfermented sorghum flour, fermented and dried sorghum flour decreased the pH of the dough from 5.8 to 4.9, increased bread volume by ≈4%, improved crumb structure, and slightly decreased crumb firmness. IVPD of the composite bread was also improved. Mixing wet fermented sorghum flour directly with wheat flour (sourdough‐type process) further increased loaf volume and weight and reduced crumb firmness, and simplified the breadmaking process. It appears that the low pH of fermented sorghum flour inactivated amylases and increased the viscosity of sorghum flour, thus improving the gas‐holding capacity of sorghum and wheat composite dough. Fermentation of sorghum flour, particularly in a sourdough breadmaking process, appears to have considerable potential for increasing sorghum utilization in bread.     

Composition and Utilization of Barley Pearling By‐Products for Making Functional Pastas Rich in Dietary Fiber and β‐Glucans

Pearling by‐products and the pearled products of two commercial stocks of hulled barley, pearled according to an industrial process consisting of five consecutive pearling steps, were analyzed for β‐glucans, dietary fiber (total, soluble, and insoluble), protein, lipid, ash, and digestible carbohydrate. The data showed that the pearling flour fractions, abraded in the fourth and fifth hullers, contained interesting amounts of β‐glucans (3.9–5.1% db) from a nutritional point of view. These fractions were subsequently enriched in β‐glucans using a milling‐sieving process to double β‐glucan content (9.1–10.5% db). Functional pastas, enriched with β‐glucans and dietary fiber, were produced by substituting 50% of standard durum wheat semolina with β‐glucan‐enriched barley flour fractions. Although darker than durum wheat pasta, these pastas had good cooking qualities with regard to stickiness, bulkiness, firmness, and total organic matter released in rinsing water. The dietary fiber (13.1–16.1% wb) and β‐glucan (4.3–5.0% wb) contents in the barley pastas were much higher than in the control (4.0 and 0.3% wb, respectively). These values amply meet the FDA requirements of 5 g of dietary fiber and 0.75 g of β‐glucans per serving (56 g in the United States and 80 g in Italy). At present, the FDA has authorized the health claim “may reduce the risk of heart disease” for food containing β‐glucans from oat and psyllium only.     

Effect of Grain Protein Concentration on Falling Number of Ungerminated Soft White Winter Wheat

Falling number (FN) values below 300 sec in the apparent absence of preharvest sprouting are periodically observed in the U.S. Pacific Northwest (USPNW). Wheat in the USPNW is predominantly soft‐grained and often grown under conditions conducive to low grain protein concentration (GPC). Our hypothesis is that low GPC per se could be responsible for some low FN results and not elevated α‐amylase from either sprouting or late‐maturity amylase. The relationship between FN and GPC was investigated using grain from the 2011 wheat harvest. Soft white winter wheat samples from six locations in Oregon were tested in duplicate. Across the entire sample set, FN and GPC were positively correlated (r = 0.65, P ≤ 0.001). When putatively sprouted samples (FN < 280 sec) were removed from the analysis, the correlation was still apparent (r = 0.69, P ≤ 0.001). Hardness index was also correlated with FN (r = 0.45, P ≤ 0.001). Our preliminary conclusion is that GPC can be a substantial modulator of FN in the putative absence of elevated amylase in soft white winter wheat grown in the USPNW.     

Phenolic Content and Antioxidant Activity of Pearled Wheat and Roller‐Milled Fractions

Wheat contains phenolic compounds concentrated mainly in bran tissues. This study examined the distribution of phenolics and antioxidant activities in wheat fractions derived from pearling and roller milling. Debranning (pearling) of wheat before milling is becoming increasingly accepted by the milling industry as a means of improving wheat rollermilling performance, making it of interest to determine the concentration of ferulic acid at various degrees of pearling. Eight cultivar samples were used, including five genotypes representing four commercial Canadian wheat classes with different intrinsic qualities. Wheat was pearled incrementally to obtain five fractions, each representing an amount of product equivalent to 5% of initial sample weight. Wheat was also roller milled without debranning. Total phenolic content of fractions was determined using the modified Folin‐Ciocalteau method for all pearling fractions, and for bran, shorts, bran flour, and first middlings flour from roller milling. Antioxidant activity was determined on phenolic extracts by a method involving the use of the free radical 2,2‐diphenyl‐l‐picrylhydrazyl (DPPH). Total phenolics were concentrated in fractions from the first and second pearlings (>4,000 mg/kg). Wheat fractions from the third and fourth pearlings still contained high phenolic content (>3,000 mg/kg). A similar trend was observed in antioxidant activity of the milled fractions with ≈4,000 mg/kg in bran and shorts, ≈3,000 mg/kg in bran flour, and <1,000 mg/kg in first middlings flour. Total phenolic content and antioxidant activity were highly correlated (R² = 0.94). There were no significant differences between red and white wheat samples. A strong influence of environment (growing location) was indicated. Pearling represents an effective technique to obtain wheat bran fractions enriched in phenolics and antioxidants, thereby maximizing health benefits associated with wheat‐based products.     

Effects of (1→3)(1→4)-β-d-Glucans of Wheat Flour on Breadmaking

Water-soluble nonstarch polysaccharides were extracted from commercial hard red winter wheat flour and separated into three fractions by graded ethanol precipitation. The three fractions, F15, F40, and F60, varied in polysaccharide composition. Fraction F15 was rich in watersoluble (1→3)(1→4)-β-d -glucans, and fractions F40 and F60 were rich in arabinoxylans. Addition of individual fractions to a bread formula did not affect bread loaf volume. Addition of fraction F15 to the formula improved bread crumb grain. Treatment of (1→3)(1→4)-β-D -glucan-rich fraction F15 with lichenase before its addition to the bread formula resulted in bread with poor crumb grain. Treatment of the F15 fraction with β-xylanase before its addition to the bread formula resulted in bread with slightly improved crumb grain. Presumably, the (1→3)(1→4)-β-D -glucans in fraction F15 improved crumb grain by stabilizing air cells in the bread dough and preventing coalescence of the cells. Addition of pentosan-rich fractions F40 and F60 to the bread formula did not improve crumb grain and interfered with the improving effect of (1→3)(1→4)-β-D -glucan-rich fraction F15. Hydrolysis of the arabinoxylans in flour by adding β-xylanase to the bread formula resulted in improved crumb grain.     

Characteristics of Noodles and Bread Prepared from Double‐Null Partial Waxy Wheat

Double‐null partial waxy wheat (Triticum aestivum L.) flours were used for isolation of starch and preparation of white salted noodles and pan bread. Starch characteristics, textural properties of cooked noodles, and staling properties of bread during storage were determined and compared with those of wheat flours with regular amylose content. Starches isolated from double‐null partial waxy wheat flours contained 15.4–18.9% amylose and exhibited higher peak viscosity than starches of single‐null partial waxy and regular wheat flours, which contained 22.7–25.8% amylose. Despite higher protein content, double‐null partial waxy wheat flours, produced softer, more cohesive and less adhesive noodles than soft white wheat flours. With incorporation of partial waxy prime starches, noodles produced from reconstituted soft white wheat flours became softer, less adhesive, and more cohesive, indicating that partial waxy starches of low amylose content are responsible for the improvement of cooked white salted noodle texture. Partial waxy wheat flours with >15.1% protein produced bread of larger loaf volume and softer bread crumb even after storage than did the hard red spring wheat flour of 15.3% protein. Regardless of whether malt was used, bread baked from double‐null partial waxy wheat flours exhibited a slower firming rate during storage than bread baked from HRS wheat flour.     

Starch Hydrolyzing Enzymes for Retarding the Staling of Rice Bread

Previous attempts have been made to obtain gluten‐free bread of acceptable quality for bread specific volume and crumb texture. Rice bread is a good alternative to celiac patients, but it has a very rapid staling during storage. Rice starch is more prone to retrograde during storage than wheat starch, and the special hydrophobic nature of the rice proteins requires specific enzymes to be used in the rice bread process. To retard rice bread staling, two different starch hydrolyzing enzymes (α‐amylase of intermediate thermostability and cyclodextrin glycoxyl transferase [CGTase]) have been tested and their effect on fresh bread quality and staling during storage has been evaluated. The addition of α‐amylase improved bread specific volume and crumb firmness but very sticky textures were obtained. The addition of CGTase produced even higher specific volume and similar crumb firmness with better texture. Both enzymes decreased the ability of amylopectin to retrograde during storage. The firming kinetic was lowered by the α‐amylase but not the limiting firmness, while the rice crumb from CGTase firmed quickly with a very short range of firmness increase. Results revealed that the starch hydrolysis brought about by the α‐amylase was not sufficient to retard staling. CGTase was considered a better antistaling agent because of its starch hydrolyzing and cyclizing activity.     

Effects of Oat Grain Hydrothermal Treatments on Wheat-Oat Flour Dough Properties and Breadbaking Quality

Hydrothermal treatments, which are routine in oat processing, have profound effects on oat flour dough rheological properties. The influence of roasting and steam treatments of oat grain on dough mixing and breadbaking properties was investigated when hydrothermally treated oat flour was blended with wheat flour. Roasting of oat grain (105°C, 2 hr) resulted in oat flours that were highly detrimental to wheat flour dough mixing properties and breadbaking quality. Steaming (105°C, 20 min) or a combination of roasting and steaming of oat grain significantly improved the breadbaking potential of the oat flours. The addition of oat flours increased water absorption and mixing requirements of the wheat flour dough and also decreased bread loaf volume. However, at the 10% substitution level, steamed oat flours exhibited only a gluten dilution effect on bread loaf volume when wheat starch was used as a reference. Oat flour in the breadbaking system decreased the retrogradation rate of bread crumb starch. The results indicate that adequate hydrothermal treatments of oat grain are necessary for oat flour breadbaking applications. Steamed oat flours used at a 10% level retarded bread staling without adversely affecting the loaf volume.     

Textural Comparisons of Gluten‐Free and Wheat‐Based Doughs,Batters, and Breads

Studies were conducted with two newly developed gluten‐free bread recipes. One was based on corn starch (relative amount 54), brown rice (25), soya (12.5), and buckwheat flour (8.5), while the other contained brown rice flour (50), skim milk powder (37.5), whole egg (30), potato (25), and corn starch (12.5), and soya flour (12.5). The hydrocolloids used were xanthan gum (1.25) and xanthan (0.9) plus konjac gum (1.5), respectively. Wheat bread and gluten‐free bread made from commercial flour mix were included for comparison. Baking tests showed that wheat and the bread made from the commercial flour mix yielded significantly higher loaf volumes (P < 0.01). All the gluten‐free breads were brittle after two days of storage, detectable by the occurrence of fracture, and the decrease in springiness (P < 0.01), cohesiveness (P < 0.01), and resilience (P < 0.01) derived from texture profile analysis. However, these changes were generally less pronounced for the dairy‐based gluten‐free bread, indicating a better keeping quality. Confocal laser‐scanning microscopy showed that the dairy‐based gluten‐free bread crumb contained network‐like structures resembling the gluten network in wheat bread crumb. It was concluded that the formation of a continuous protein phase is critical for an improved keeping quality of gluten‐free bread.     

Characteristics of French Bread Baked from Wheat Flours of Reduced Starch Amylose Content

Wheat genotypes of wild type, partial waxy, and waxy starch were used to determine the influence of starch amylose content on French bread making quality of wheat flour. Starch amylose content and protein content of flours were 25.0–25.4% and 14.3–16.9% for wild type; 21.2 and 14.9% for single null partial waxy; 15.4–17.1% and 13.2–17.6% for double null partial waxy; and 1.8 and 19.3% for waxy starch, respectively. Wheat flours of double null partial waxy starch produced smaller or comparable loaf volume of bread than wheat flours of wild type and single null partial waxy starch. Waxy wheat flour, despite its high protein content, generally produced smaller volume of bread with highly porous, glutinous, and weak crumb than wheat flours of wild type and partial waxy starch. French bread baked from a flour of double null partial waxy starch using the sponge-and-dough method maintained greater crumb moisture content for 24 hr and softer crumb texture for 48 hr of storage compared with bread baked from a flour of wild type starch. In French bread baked using the straight-dough method, double null partial waxy wheat flours with protein content >14.3% exhibited comparable or greater moisture content of bread crumb during 48 hr of storage than wheat flours of wild type starch. While the crumb firmness of bread stored for 48 hr was >11.4 N in wheat flours of wild type starch, it was <10.6 N in single or double null partial waxy flours. Wheat flours of reduced starch amylose content could be desirable for production of French bread with better retained crumb moisture and softness during storage.     

Protein and Quality Characterization of Complete and Partial Near‐Isogenic Lines of Waxy Wheat

The objective of this study was to evaluate protein composition and its effects on flour quality and physical dough test parameters using waxy wheat near‐isogenic lines. Partial waxy (single and double nulls) and waxy (null at all three waxy loci, Wx‐A1, Wx‐B1, and Wx‐D1) lines of N11 set (bread wheat) and Svevo (durum) were investigated. For protein composition, waxy wheats in this study had relatively lower albumins‐globulins than the hard winter wheat control. In the bread wheats (N11), dough strength as measured by mixograph peak dough development time (MDDT) (r = 0.75) and maximum resistance (R_max) (r = 0.70) was significantly correlated with unextractable polymeric protein (UPP), whereas in durum wheats, moderate correlation was observed (r = 0.73 and 0.59, respectively). This may be due to the presence of high molecular weight glutenin subunits (HMW‐GS) Dx2+Dy12 at the Glu‐D1 locus instead of Dx5+Dy10, which are associated with dough strength. Significant correlation of initial loaf volume (ILV) to flour polymeric protein (FPP) (r = 0.75) and flour protein (FP) (r = 0.63) was found in bread wheats, whereas in durum wheats, a weak correlation of ILV was observed with FP (r = 0.09) and FPP (r =0.51). Significant correlation of ILV with FPP in bread wheats and with % polymeric protein (PPP) (r = 0.75) in durum lines indicates that this aspect of end‐use functionality is influenced by FPP and PPP, respectively, in these waxy wheat lines. High ILV was observed with 100% waxy wheat flour alone and was not affected by 50% blending with bread wheat flour. However, dark color and poor crumb structure was observed with 100% waxy flour, which was unacceptable to consumers. As the amylopectin content of the starch increases, loaf expansion increases but the crumb structure becomes increasingly unstable and collapses.     

Pyranose Oxidase from Trametes multicolor Impacts Dough and Bread Microstructure

Pyranose oxidase (P₂O) improves wheat flour dough stability and bread quality. We related its effect on dough spread behavior to that on dough and bread crumb structure. Increasing P₂O addition levels gradually reduced dough flow. High P₂O addition levels further increased dough strength, significantly increased dough cell wall thickness, and decreased bread loaf volume. Taken together, affecting dough spread behavior impacts dough and bread (crumb) structure, and dough structure largely determines bread crumb structure.     

Bran Characteristics and Bread‐Baking Quality of Whole Grain Wheat Flour

Variations in physical and compositional bran characteristics among different sources and classes of wheat and their association with bread‐baking quality of whole grain wheat flour (WWF) were investigated with bran obtained from Quadrumat milling of 12 U.S. wheat varieties and Bühler milling of six Korean wheat varieties. Bran was characterized for composition including protein, fat, ash, dietary fiber, phenolics, and phytate. U.S. soft and club wheat brans were lower in insoluble dietary fiber (IDF) and phytate content (40.7–44.7% and 10.3–17.1 mg of phytate/g of bran, respectively) compared with U.S. hard wheat bran (46.0–51.3% and 16.5–22.2 mg of phytate/g of bran, respectively). Bran of various wheat varieties was blended with a hard red spring wheat flour at a ratio of 1:4 to prepare WWFs for determination of dough properties and bread‐baking quality. WWFs with U.S. hard wheat bran generally exhibited higher dough water absorption and longer dough mixing time, and they produced smaller loaf volume of bread than WWFs of U.S. soft and club wheat bran. WWFs of two U.S. hard wheat varieties (ID3735 and Scarlet) produced much smaller loaves of bread (<573 mL) than those of other U.S. hard wheat varieties (>625 mL). IDF content, phytate content, and water retention capacity of bran exhibited significant relationships with loaf volume of WWF bread, whereas no relationship was observed between protein content of bran and loaf volume of bread. It appears that U.S. soft and club wheat bran, probably owing to relatively low IDF and phytate contents, has smaller negative effects on mixing properties of WWF dough and loaf volume of bread than U.S. hard wheat bran.     

Transgenic Enhancement of High‐Molecular‐Weight Glutenin Subunit 1Dy10 Concentration: Effects in Wheat Flour Blends and Sponge and Dough Baking

Dough strength is needed for efficient breadmaking quality. This property is strongly influenced in wheat (Triticum aestivum L.) by gluten seed storage proteins and, in particular, by high‐molecular‐weight (HMW) glutenin subunit composition. Experiments were designed to elevate expression of a key native HMW glutenin subunit (1Dy10) via genetic engineering and to determine whether resultant flours can be used in sponge and dough applications, the most common commercial bread‐baking procedure. Both unblended and blended samples from transgenic and nontransgenic sister lines were tested, with blended samples being formed by addition to a control sample. Dough properties, as determined by farinograph evaluation, were improved by the transgene‐encoded increases in 1Dy10 in both undiluted and blended flours. Mean farinograph stability of transgenic samples was twice that of the control, and blends with transgenic samples demonstrated increases in stabilities proportional to the amount of transgenic flour included. Mean farinograph quality numbers of transgenic samples, and of all blends containing transgenic flour, were significantly higher than both the control and all nontransgenic treatments. In the sponge and dough bake procedure, undiluted transgenic samples induced lower scores, relative to both control and undiluted nontransgenic samples, for water absorption, crumb body firmness, and loaf volume. In blends, however, the transgenic samples resulted in improvements in some sponge and dough loaf attributes, including loaf symmetry and crumb color score, without any concomitant loss of loaf volume in transgenic blends. These improved variables relate to finished product appearance and to consumer selection in markets. The use of transgenic flours with increased 1Dy10 glutenin content in commercial blends could provide advantages in sponge and dough bake applications.     

Structural Properties of Starch in Bread and Bread Model Systems: Influence of an Antistaling α‐Amylase

The influence of an antistaling α‐amylase on bread crumb and on wheat starch gels was investigated taking into account different levels of structural hierarchy. Bread was prepared by a conventional baking procedure. Starch gels were produced by heating a concentrated starch dispersion in closed molds. Bread and starch gels were characterized by compression tests, light microscopy (LM), differential scanning calorimetry, and X‐ray measurements. The α‐amylase enhanced the initial firmness of starch gels and reduced the firming rate of bread and starch gels on aging. LM revealed that amylose and amylopectin phase‐separated within the starch granules and that freshly baked control bread and starch gels showed weak birefringence which became more intense during aging. Amylase‐containing bread and starch gels exhibited strong birefringence in the amylose rich region of the granules directly after baking which did not significantly increase during aging. The enzyme hindered the retrogradation of amylopectin as detected by differential scanning calorimetry, whereas X‐ray diffraction indicated that the enzyme induced low levels of starch crystallinity which did not change during aging. It is hypothesized that the antistaling effect of the amylase is based on the capacity to partially degrade amylopectin and, by this, to hinder its recrystallization. On the other hand, the enzyme slightly degrades amylose by an endo‐mechanism which, in turn, promotes the rapid formation of a partly crystalline amylose network in fresh bread and hinders amylose rearrangements during aging.     

Comparison of Different Methods for Phenotyping Preharvest Sprouting in White‐Grained Wheat

The objective of this study was to identify a suitable method for phenotyping preharvest sprouting (PHS) resistance in white bread wheat. Forty doubled‐haploid (DH) lines derived from a cross between two white‐grained spring wheats (Triticum aestivum L.) cultivar Argent (nondormant) and wheat breeding line W98616 (dormant) were evaluated for germination frequency, Falling Number (FN), and α‐amylase activity in dry and water‐imbibed seeds and spikes. The α‐amylase activity in dry seeds or spikes did not differ significantly between parent lines or lines of the DH population. Wetting of seeds or spikes for two days caused a five‐ to sevenfold increase in α‐amylase activity but only in Argent and the nondormant subgroup (49–100% germination) of the DH lines. A positive association (r = 0.60***) was detected between germination frequency and α‐amylase activity in imbibed seeds and spikes. Germination frequency could not be correlated to FN or α‐amylase activity in dry‐harvested seeds. FN showed a strong correlation (r = –0.83***) to α‐amylase activity in the dry‐harvested seeds but could not be correlated to α‐amylase activity in the imbibed seeds. The germination test was the most reliable method for measuring PHS resistance because seed dormancy provides potential resistance to PHS, whereas high α‐amylase activity may occur in grains without causing PHS.