Comparison of Small and Large Deformation Rheological Properties of Wheat Dough and Gluten

The rheological properties of dough and gluten are important for end‐use quality of flour but there is a lack of knowledge of the relationships between fundamental and empirical tests and how they relate to flour composition and gluten quality. Dough and gluten from six breadmaking wheat qualities were subjected to a range of rheological tests. Fundamental (small‐deformation) rheological characterizations (dynamic oscillatory shear and creep recovery) were performed on gluten to avoid the nonlinear influence of the starch component, whereas large deformation tests were conducted on both dough and gluten. A number of variables from the various curves were considered and subjected to a principal component analysis (PCA) to get an overview of relationships between the various variables. The first component represented variability in protein quality, associated with elasticity and tenacity in large deformation (large positive loadings for resistance to extension and initial slope of dough and gluten extension curves recorded by the SMS/Kieffer dough and gluten extensibility rig, and the tenacity and strain hardening index of dough measured by the Dobraszczyk/Roberts dough inflation system), the elastic character of the hydrated gluten proteins (large positive loading for elastic modulus [G′], large negative loadings for tan δ and steady state compliance [J_e⁰]), the presence of high molecular weight glutenin subunits (HMW‐GS) 5+10 vs. 2+12, and a size distribution of glutenin polymers shifted toward the high‐end range. The second principal component was associated with flour protein content. Certain rheological data were influenced by protein content in addition to protein quality (area under dough extension curves and dough inflation curves [W]). The approach made it possible to bridge the gap between fundamental rheological properties, empirical measurements of physical properties, protein composition, and size distribution. The interpretation of this study gave indications of the molecular basis for differences in breadmaking performance.     

Influence of Starch and Gluten Characteristics on Rheological Properties of Wheat Flour Gel at Small and Large Deformation

Starch and gluten were isolated from 10 wheat cultivars or lines with varied amylose content. The rheological properties of 30% wheat flour gel, starch gel, and the gel of isolated gluten mixed with common starch were determined in dynamic mechanical testing under shear deformation, creep‐recovery, and compression tests under uniaxial compression. Variation of wheat samples measured as storage shear modulus (G′), loss shear modulus (G″), and loss tangent (tan δ = G″/G′) was similar between flour and starch gels and correlated significantly between flour and starch gel. The proportion of acetic acid soluble glutenin exhibited a significant relationship with tan δ of gluten‐starch mixture gel. The small difference in amylose content strongly affected the rheological parameters of flour gels in creep‐recovery measurement. Wheat flour gel with lower amylose content showed higher creep and recovery compliance that corresponded to the trend in starch gel. Compressive force of flour gel at 50 and 95% strain correlated significantly with that of starch gel. Gel mixed with the isolated gluten from waxy wheat lines appeared to have a weaker gel structure in dynamic viscoelasticity, creep‐recovery, and compression tests. Starch properties of were primarily responsible for rheological changes in wheat flour gel.     

Effect of l‐Cysteine on the Rheological Properties of Wheat Flour

Extrudate expansion of cereal‐based products is largely dependent on the molecular interactions and structural transformations that proteins undergo during extrusion processing. Such changes strongly influence the characteristic rheological properties of the melt. It is possible to modify rheological properties of wheat flour during extrusion processing, in particular shear viscosity, with cysteine. The objective of this work was to further develop an understanding of the molecular interactions and structural transformations of wheat flour from dynamic oscillatory rheological measurements. Temperature and frequency sweeps were conducted in the linear viscoelastic range of the material. Changes in the storage modulus (G′), the loss modulus (G″) and the loss tangent (tan δ) of 25% moisture wheat flour disks as a function of cysteine concentration (0–0.75%) were monitored. Molecular weight between cross‐links (M_c) and the number of cross‐links (N_c) per glutenin molecule were determined from frequency sweep data. Increasing cysteine concentration broke cross‐links by decreasing G′ maximum and increasing tan δ values. Molecular weight between cross‐links increased and the number of cross‐links decreased. G′ values from temperature sweeps showed a similar trend. This information leads to a better understanding of the viscoelastic behavior of wheat flour doughs during extrusion cooking and elucidation of protein‐protein reaction mechanisms and other interactions in extruded cereal‐based snack foods.     

Effect of Moisture Content on Viscoelastic Properties of Hydrated Gliadin

The effect of moisture content on the linear viscoelastic properties of gliadin hydrated to 30 and 40% moisture content [gliadin(30%) and gliadin(40%), respectively] was determined. These two moisture contents bracketed the equilibrium moisture content of gliadin, which was 37.6%. Time‐temperature‐superposition was used to develop master curves of the elastic modulus (G′), viscous modulus (G″), dynamic viscosity (η′), and tan δ (G″/G′) from isothermal frequency sweep data obtained at 25–80°C. Smooth master curves were obtained for all of the viscoelastic functions for both gliadins. G′ and G″ showed a power law dependency on frequency (with G″ > G′) for frequencies <0.1 rad/sec for gliadin(30%) and <1 rad/sec for gliadin(40%). The low‐frequency‐limiting slopes on log‐log coordinates for G′ and G″ were 0.700 and 0.646 for gliadin(30%), respectively. Corresponding values were 0.658 and 0.614 for gliadin(40%). G′ crossed over G″ at a frequency of ≈0.3 rad/sec for gliadin(30%), while G′ and G″ for gliadin(40%) only became congruent at higher frequencies. Both gliadin samples showed appreciable frequency dependence of η′ over the entire frequency range, while η′ was greater for gliadin(30%) than for gliadin(40%) at all frequencies, but especially at the lowest frequencies. Tan δ increased gradually from a value of ≈1 at 0.1 rad/sec to ≈2 at the lowest frequency of 0.0002 rad/sec for both gliadins, but tan δ decreased rapidly for gliadin(30%) for frequencies >0.1 rad/sec. Thus, the main difference between gliadin(30%) and gliadin(40%) was that elastic effects (G′ > G″ and decreased tan δ were more prominent for gliadin(30%) at the higher frequencies. In addition, the frequency dependence of G′, G″, η′, and tan δ for the two gliadin samples was compared directly with two samples of poly(dimethylsiloxane) (PDMS) a linear silicone‐based entangled polymer with molecular weights (MW) of 140,000 and 385,000. The substantial differences in the magnitude and overall patterns of the frequency dependence of the viscoelastic functions between the gliadin and PDMS samples was attributed to the dominant effect that noncovalent secondary associations apparently have on the linear viscoelasticity of the gliadins. The energy of activation for flow (determined from the temperature dependence of the shift factors) for the gliadin samples for the range 25–45°C was higher than is typical for entangled linear polymer melts. The activation energy decreased for temperatures greater than ≈60°C for gliadin(30%) and ≈50°C for gliadin(40%). Thus, hydrated gliadin cannot be considered to be a simple viscoelastic liquid.     

Quantitative and Qualitative Role of Added Gluten on White Salted Noodles

A commercial gluten and glutens isolated from four soft and four hard wheat flours were incorporated into a hard and a soft white flour by replacement to directly determine the quantitative and qualitative role of gluten proteins in making noodles. Gluten incorporation (6%) decreased water absorption of noodle dough by 3%, shortened the length of the dough sheet by 15 and 18%, and increased the thickness of the dough sheet by 18 and 20% in soft and hard wheat flour, respectively. Noodles imbibed less water and imbibed water more slowly during cooking with gluten incorporation, which resulted in a 3‐min increase in cooking time for both soft and hard wheat noodles. Despite the extended cooking time of 3 min, noodles incorporated with 6% gluten exhibited decreases in cooking loss by 15% in soft wheat. In hard wheat flour, cooking loss of noodles was lowest with 2% incorporation of gluten. Tensile strength of fresh and cooked noodles, as well as hardness of cooked noodles, increased linearly with increase in gluten incorporation, regardless of cooking time and storage time after cooking. While hardness of cooked noodles either increased or showed no changes during storage for 4 hr, tensile strength of noodles decreased. There were large variations in hardness and tensile strength of cooked noodles incorporated with glutens isolated from eight different flours. Noodles incorporated with soft wheat glutens exhibited greater hardness and tensile strength than noodles with hard wheat glutens. Tensile strength of cooked noodles incorporated with eight different glutens negatively correlated with SDS sedimentation volume of wheat flours from which the glutens were isolated.     

Effects of Wheat Starch and Gluten on Tortilla Texture

Wheat starches were isolated from three wheat flours. Two vital wheat glutens, one from a commercial source and another one isolated from straight-grade flour, were combined with wheat starches to form reconstituted flours with a protein level of 10%. Several characteristics of tortillas made with the hot-press method were measured. No significant difference (P < 0.05) occurred in texture of tortillas made with hard wheat gluten and soft wheat gluten. Wheat starches did not have any significant (P < 0.05) effect on tortilla stretchability or foldability. Analysis of variance confirmed that wheat starch and gluten had limited effects on tortilla texture. The possible reasons were that the solubles of wheat flour were not included, and the shortening in the tortilla formula interfered with the interaction of gluten and starch.     

Effects of Flour Particle Size and Starch Damage on Processing and Quality of White Salted Noodles

Several reduction grinding conditions were used on a Canadian Western Red Spring (CWRS) farina to yield flours of comparable protein content within three specific particle size ranges (132–193, 110–132, 85–110 μm) at three starch damage levels (3.0, 3.9, 7.0 Megazyme units). White salted noodles (1% w/w NaCl) were initially processed at a fixed absorption (32%). Dynamic oscillatory and large deformation creep measurements indicated that doughs with lower starch damage, thick or thin, exhibited lower G′ (storage modulus), higher tan δ (G″ [loss modulus]/G′) values, and greater maximum strain during creep than doughs with higher starch damage. There were no clear trends between work input during sheeting and either starch damage or particle size. Instrumental texture analysis of raw noodles showed no significant differences due to either starch damage or flour particle size. Flours with fine particle size gave cooked noodles with the best textural attributes, whereas starch damage exhibited no consistent relationship with cooked noodle texture. Cooking loss was greatest in samples with highest starch damage and coarsest particle size; water uptake was inversely related to starch damage and particle size. Experiments were repeated at adjusted water absorptions (32–36.5%) for fine and coarse flours with highest and lowest starch damage. Differences in raw noodle dough rheological properties were largely eliminated, confirming that differences noted at constant absorption were primarily due to flour water absorption. Work input during sheeting was inversely related to starch damage and was higher for fine particle size. Cooking losses were highest for higher starch damage and fine particle size. Water uptake was highest for fine particle size, but in contrast to cooking loss, was higher at lower starch damage. Textural parameters indicated superior cooking quality when particle size was finer and starch damage was lower. Flour particle size and starch damage (as indicated by water absorption) are both primary quality determinants of white salted noodle properties and, to some extent, exert their influence independently.     

Comparison of Asian Noodles from Some Hard White and Hard Red Wheat Flours

Asian noodles were prepared by an objective laboratory method that included adding optimum water to the dry ingredients, mixing the ingredients to homogeneous salt distribution, and sheeting of the dough under low shear stress. The lightness (L*) values of alkaline‐ and salt‐noodle doughs made from 65% extraction hard white wheat flours (except KS96HW115 flour at ≈70% extraction) were higher than those from 60% extraction hard red wheat flours (except Karl 92 flour at ≈70% extraction). A hard white spring wheat, ID377s, and a Kansas line of hard white winter wheat, KS96HW115, to be released in 2000, gave the highest L* values for dough sheets stored for 2 and 24 hr at 25°C. Cooking losses were 5–9 percentage points higher for alkaline noodles than salt noodles, but the cooking yields of the two types of Asian noodles were almost the same. Cooked alkaline noodles made from a high‐swelling flour (SP₉₃≈21 g/g) gave higher tensile strength than those made from several low‐swelling flours (SP₉₃ ≈15 g/g) with the same protein contents (≈12.5%). However, the cooked salt noodles gave the same tensile strength.     

Relationship Between Protein Characteristics and Instant Noodle Making Quality of Wheat Flour

We investigated the relationship between the protein content and quality of wheat flours and characteristics of noodle dough and instant noodles using 14 hard and soft wheat flours with various protein contents and three commercial flours for making noodles. Protein content of wheat flours exhibited negative relationships with the optimum water absorption of noodle dough and lightness (L*) of the instant noodle dough sheet. Protein quality, as determined by SDS sedimentation volume and proportion of alcohol‐ and salt‐soluble protein of flour, also influenced optimum water absorption and yellow‐blueness (b*) of the noodle dough sheet. Wheat flours with high protein content (>13.6%) produced instant noodles with lower fat absorption, higher L*, lower b*, and firmer and more elastic texture than wheat flours with low protein content (<12.2%). L* and free lipid content of instant noodles were >76.8 and <20.8% in hard wheat flours of high SDS sedimentation volume (>36 mL) and low proportion of salt‐soluble protein (<12.5%), and <75.7 and >21.5% in soft wheat flours with low SDS sedimentation volume (<35 mL) and a high proportion of salt‐soluble protein (>15.0%). L* of instant noodles positively correlated with SDS sedimentation volume and negatively correlated with proportion of alcohol‐ and salt‐soluble protein of flour. These protein quality parameters also exhibited a significant relationship with b* of instant noodles. SDS sedimentation volume and proportion of salt‐soluble protein of flours also exhibited a significant relationship with free lipid content of instant noodles (P < 0.01 and P < 0.001, respectively). Protein quality parameters of wheat flour, as well as protein content, showed significant relationship with texture properties of cooked instant noodles.     

Glass Transition Behavior and Rheological Properties of Surfactants and Gluten‐Surfactant Mixtures

Diacetyltartaric acid esters of monoglycerides (DATEM) and sodium stearoyl lactylate (SSL) displayed thermal events corresponding to glass transition temperature (T_g) and melting of crystalline domains, while monoglycerides (MG) exhibited an endothermic peak corresponding to melting of crystalline structures when heated in a differential scanning calorimeter. The plasticizing effect of water on T_g of gluten exhibited little apparent change in the presence of DATEM, MG, or SSL (glutensurfactant 10:1), in the moisture range of 6.5–21.3% as shown by mechanical spectrometry and differential scanning calorimetry. Glutensurfactant mixtures showed higher G′ and apart from gluten‐SSL, which displayed higher tan δ (G″/G′) at ≤2.51 rad/sec, lower tan δ values than gluten in the frequency range of 0.1–100 rad/sec. DATEM and SSL softened the gluten network before cross‐linking reactions, while MG shifted the onset of cross‐linking reactions to higher temperatures at moisture contents of 30–40%. Complete vitrification of the gluten network occurred at higher temperatures, at the indicated moisture contents, in the presence of surfactants. Softening of the matrix and the delay in cross‐linking of gluten, in the presence of surfactants, might allow for greater expansion of doughs during baking with concomitant increase in loaf volumes.     

Effects of Transglutaminase Enzyme on Fundamental Rheological Properties of Sound and Bug‐Damaged Wheat Flour Doughs

Transglutaminase (TG) catalyzes the formation of nondisulfide covalent crosslinks between peptide‐bound glutaminyl residues and ∊‐amino groups of lysine residues in proteins. Crosslinks among wheat gluten proteins by TG are of particular interest because of their high glutamine content. Depolymerization of wheat gluten proteins by proteolytic enzymes associated with bug damage causes rapid deterioration of dough properties and bread quality. The aim of the present study was to investigate the possibility of using TG to regain gluten strength adversely affected by wheat bug proteases. A heavily bug‐damaged (Eurygaster spp.) wheat flour was blended with sound cv. Augusta or cv. Sharpshooter flours. Dynamic rheological measurements, involving a frequency sweep at a fixed shear stress, were performed after 0, 30, and 60 min of incubation on doughs made from sound or blended flour samples. The complex moduli (G* values) of Augusta and Sharpshooter doughs blended with 10% bug‐damaged flour decreased significantly after 30 min of incubation. These dough samples were extremely soft and sticky and impossible to handle for testing purposes after 60 min of incubation. To test the possibility of using TG to counteract the hydrolyzing effect of bug proteases on gluten proteins, TG was added to the flour blends. The G* values of TG‐treated sound Augusta or Sharpshooter doughs increased significantly after 60 min of incubation. The G* values of the Augusta or Sharpshooter doughs blended with bug‐damaged flour increased significantly rather than decreased after 30 and 60 min of incubation when TG was included in the dough formulation. This indicates that the TG enzyme substantially rebuilds structure of dough hydrolyzed by wheat bug protease enzymes.     

Effect of Oxidation on the Dynamic Rheological Properties of Wheat Flour-Water Doughs

Oxidation increased the strength of the dough. Addition of ascorbic acid or azodicabonamide (ADA) to dough increased both elastic modulus (G′) and viscous modulus (G″), while addition of cysteine decreased both values. Hydrogen peroxide, from either calcium peroxide or glucose oxidase, increased G′ and G″ and decreased tan δ (G″/G′) values. In addition to strengthening the dough, hydrogen peroxide dried the dough, but ADA did not. The absorption of doughs containing 20 GU of glucose oxidase (source of hydrogen peroxide) could be increased by ≈5% without altering the rheological properties. Presumably, the mobility of water in the gel formed by oxidative gelation decreased, thereby causing a drying of the dough.     

15N Fertilizer recovery in different tillage–straw systems on a Vertisol in north‐west Mexico

Tillage and residue retention affect nitrogen (N) dynamics and nutrient losses and therefore nitrogen use efficiency (NUE) and crop fertilizer use, however, there is little information about residual fertilizer effects on the subsequent crop. Micro‐plots with ¹⁵N‐labelled urea were established in 2014/2015 on a long‐term experiment on a Vertisol in north‐west Mexico. N fertilizer recovery (NFR) and the effects of residual fertilizer N for summer maize (Zea mays L.) and the subsequent wheat (Triticum durum L.) crop were studied in three tillage–straw management practices (CTB: conventionally tilled beds; PB‐straw: permanent raised beds with residue retention; PB‐burn: permanent raised beds with residue burning). Fertilizer ¹⁵N recovery rates for maize grain across all treatments were low with an average of 11%, but after wheat harvest total recovered ¹⁵N (¹⁵N in maize and wheat straw and grain, residual soil ¹⁵N) was over 50% for the PB‐burn treatment. NFR was lowest in CTB after two cropping cycles (32%). Unaccounted N from applied fertilizer for the maize crop averaged 120 kg ¹⁵N ha^?1 after wheat harvest. However, more than 20% of labelled ¹⁵N was found in the 0–90 cm soil profile in both PB treatments after wheat harvest, which highlights the need for long‐term studies and continuous monitoring of the soil nutrient status to avoid over‐application of mineral N fertilizer.     

Biochemical Analysis and Rheological Properties of Gluten Modified by Transglutaminase

A transglutaminase from Streptoverticillium sp. was used to create new covalent intermolecular cross‐links between proteins in gluten. This modification induced drastic changes in its physicochemical properties as well as in its rheological behavior. To understand these changes, we characterized the gluten extractability in acetic acid and identified the proteins of supernatant and pellet by immunoblotting using antibodies specific for each prolamin class. The proportion of soluble proteins decreased drastically after transglutaminase treatment due to the formation of large insoluble polymers as shown by SDS‐PAGE. Among the constitutive proteins of gluten, the high molecular weight glutenin subunits were the most affected in the transglutaminase reaction. The rheological behavior of gluten after 18 hr of incubation with transglutaminase was studied in shear by dynamic measurements over 10^‐3 – 10¹ Hz frequency range and by creep and recovery tests. The behavior of treated glutens remained that of a transient network, but the viscoelastic response was shifted toward shorter times and the steady‐state viscosity was greatly increased. The enzymatic treatment caused a considerable reinforcement of the network. The modified glutens were also less sensitive to thermal processing than unmodified glutens, as shown by a lower amplitude of variation of storage modulus G′ with temperature after enzymatic treatment.     

Rapid Assessment and Prediction of Wheat and Gluten Baking Quality With the 2‐g Direct Drive Mixograph Using Multivariate Statistical Analysis

A computerized 2‐g direct drive mixograph was used to study the mixing characteristics of flours milled from a range of breadmaking cultivars obtained from five separate locations around the UK, providing 54 flour samples. Fifteen parameters were extracted from each mixograph trace using the Mixsmart software program and correlated with baking volume using partial least squares multiple regression statistical analysis to give a prediction of baking volume. Location had a considerable influence on the prediction of baking volume. Excellent predictions of baking volume were obtained from flours from individual locations (R² = 0.805–0.995), but predictions based on all cultivars without discriminating locations were poor. When mixograph and baking volume data for each cultivar were averaged over all five locations, a very high correlation was obtained (R² = 0.999). Preparation of flour samples using rapid, small‐scale milling procedures (Brabender Quadrumat Jr. mill and Perten 3100 hammer mill) did not have any adverse effect on prediction of baking volume. Mixograph parameters obtained from six commercial glutens of varying quality gave good correlations with test baking volumes, based on 6% gluten addition to a control flour.     

Effect of Polarity of Complexing Agents on Thermal and Rheological Properties of Rice Starch Gels

The ability of rice starch to complex with ligands of various polarities was studied to examine the mechanism of complex formation in an aqueous solution. Differential scanning calorimetry (DSC) showed that TNuS19 rice starch (27.9% amylose) formed inclusion complexes with all 12-C complexing agents. The onset melting temperatures (T_o) of the complexes were ≈93–96°C. The saturation concentrations of added ligands with high polarity, lauric acid (LA), and lauryl alcohol (LOH), had a range of 2–4% (w/w) of the starch, and both of the corresponding melting enthalpies (ΔH) were ≈3.0 J/g. In contrast, the saturation concentrations of ligands with low polarity, methyl laurate (ML) and dodecane (DO), were ≈1–2% (w/w), and the ΔH were 1.87 and 1.80 J/g, respectively. This implied that solubility of ligands had a significant effect on the extent of complexation. The T_o and ΔH increased with an increase of annealing time at 85°C, and the optima for the partially reversible complex formation were 2 hr of annealing in all cases. When measured by a dynamic rheometer, the TNuS19 rice starch gel with added LA or LOH showed a higher storage modulus (G′) than that with no complexing agent added during heating. The G′ and tan δ of the complexed gel were further increased during 12 hr of storage. The increase of G′ indicated that the elastic structure of the concentrated rice starch gels could be improved by complex formation and annealing, whereas the increase of tan δ suggested incompatibility of starch components during storage.     

Effects of Protein Content and Composition on White Noodle Making Quality: Color

Wheat cultivars, representing three winter and three spring wheats were grown in western Canada with six levels of nitrogen fertilizer and flours were prepared from them with an extraction rate of 65%. Using a chromameter, flour color and the color of uncooked white noodle sheets made from these flours with different resting times were assessed. The cooked noodle sheet color was also assessed. While protein content initially declined with added nitrogen and increased with further nitrogen addition, brightness (L*) of flour decreased and redness (a*) and yellowness (b*) increased. Positive correlation coefficients of flour brightness with particle size index (PSI) were also observed. Flour redness (a*) and yellowness (b*) were also affected by flour moisture content, whereas L* values were not significantly correlated with moisture contents. For the uncooked white noodle sheet, as protein content increased brightness decreased but there was an increase in a* and b* values. Thus, the L* value for noodle sheets was negatively correlated with the a* and b* values. The percentages of monomeric protein and soluble glutenin in flour were equal to or better than protein content in relation to most noodle sheet color characters. Uncooked noodle sheet brightness decreased, while redness and yellowness increased with rest time. In general, uncooked white noodle sheets prepared from different wheat flours can be ranked in terms of brightness and yellowness within each level of nitrogen fertilization.     

Flour Particle Size,Starch Damage,and Alkali Reagent: Impact on Uniaxial Stress Relaxation Parameters of Yellow Alkaline Noodles

Three patent flours, each possessing three different levels of starch damage were prepared from a single hard white spring wheat. Each flour was sieved to yield three flours with different particle size distributions (85–110, 110–132, 132–183 μm). Raw alkaline noodles were prepared from the nine flours using either 1% w/w kansui (sodium and potassium carbonates in 9:1 ratio) or 1% w/w sodium hydroxide. Uniaxial stress relaxation parameters percent stress relaxation (SR%), initial rate of relaxation (k₁) and the extent of relaxation (k₂) were measured on the raw noodles immediately after production (t = 0 min) and at 60 min. Raw noodles after resting for 60 min were optimally cooked and stress relaxation parameters were measured. Raw noodles at t = 0 min exhibited SR%, k₁, and k₂ that were significantly (P < 0.0001) influenced by both the degree of starch damage and the type of alkaline reagent used. Flour particle size only influenced SR% and k₁ (P < 0.025) but had no impact on k₂. In raw noodles aged for 60 min, both SR% and k₂ were significantly influenced by alkaline reagent, particle size, and starch damage (P < 0.01) while k₁ was only affected by the degree of starch damage (P < 0.0001). Cooked noodle SR parameters were all significantly (P < 0.0001) influenced by alkaline reagent, particle size, and the degree of starch damage. Cooked noodles prepared from starch with low damaged flours within any given particle size range, regardless of the type of alkali employed, yielded the most rheologically elastic‐like (firmer) noodles. Two potential mechanisms by which the degree of starch damage influences noodle elastic like texture are discussed.     

Generation of a Mixolab Profile After the Evaluation of the Functionality of Different Commercial Wheat Flours for Hot‐Press Tortilla Production

Refined wheat flours commercially produced by five different U.S. and Mexican wheat blends intended for tortilla production were tested for quality and then processed into tortillas through the hot‐press forming procedure. Tortilla‐making qualities of the flour samples were evaluated during dough handling, hot pressing, baking, and the first five days on the shelf at room temperature. The predominant variables that affected the flour tortilla performance were wet gluten content, alveograph W (220–303) and P/L (0.70–0.94) parameters, farinograph water absorption (57%) and stability (10.8–18.7 min), starch damage (5.43–6.71%), and size distribution curves (uniform particle distribution). Flours produced from a blend of Dark Northern Spring (80%) and Mexican Rayon (20%) wheat had the highest water absorption, and tortillas obtained from this blend showed the highest diameter and lowest thickness. The whitest and best textured tortillas were obtained from the flour milled from three hard types of Mexican wheat blend. A Mixolab profile was generated from the best tortilla flours, those produced by mills 3 and 4. The Mixolab profile showed that a good flour for hot‐press tortillas had a relatively lower absorption and short dough mix time compared with a bread flour and should have a significantly higher gluten compared with an all‐purpose flour. Compared with bread flour, the tortilla flour had higher retrogradation and viscosity values. The Mixolab profile proved to be a good preliminary test to evaluate flours for hot‐press tortillas.