共查询到19条相似文献,搜索用时 140 毫秒
1.
浅析蔗渣原料对中密度纤维板质量的影响 总被引:1,自引:0,他引:1
从纤维形态,化学组成两个方面分析了蔗渣原料对中密度纤维板质量的影响。据此,以木质原料作参照,对蔗渣中密度纤维板的工艺设计及生产过程提出了一些看法。 相似文献
2.
低甲醛释放蔗渣中密度纤维板用脲醛树脂 总被引:6,自引:0,他引:6
以脲醛树脂结构形成特征为基础,研制了一种甲醛释放量低、内结合强度高的适用于蔗渣中密度纤维板生产的脲醛树脂胶粘剂。使用结果表明,所压制的蔗渣中密度纤维板物理力学性能达到国家标准要求,甲醛释放量可控制在20mg/100g左右。 相似文献
3.
在森林资源缺乏,但制糖工业发达的地区,发展以蔗渣为原料的综合利用大有可为。1982年,笔者在瑞典林产品研究所进修期间,应瑞典桑斯·德菲布拉托公司(Sunds Defibrator AB)的邀请,到该公司参加以中国广东蔗渣和泰国蔗渣为原料生产中密度纤维板的试验。本文叙述的仅是试验中的一部分。通过试验表明,以蔗渣为原料,采用适宜的设备和工艺,能够生产质地 相似文献
4.
非木材植物纤维原料人造板 总被引:3,自引:1,他引:2
本文阐述了在中国发展非木材纤维原料人造板的意义,介绍了中国林科院木材工业研究所近年来开展的利用竹材、亚麻屑、蔗渣、棉秆、葵花秆、麦秸、谷秸、玉米秸、芦苇、豆秸和烟秆等非木材纤维原料制造刨花板、中密度纤维板和硬质纤维板的研究工作。结果表明,上述非木材植物纤维原料适于制造人造板,这些人造板在很多场合可以替代木材人造板使用,因而,在中国发展非木材植物纤维原料人造板具有广阔前景。 相似文献
5.
针对桉树的材性对中密度纤维板生产的影响,分析了以桉树为原料生产中密度纤维板的设备和工艺的要求,指出利用桉树生产中密度纤维板是桉树人工林的高效利用和人造板工业可持续发展的有效途径。 相似文献
6.
概述了广西中密度纤维板产业十几年来的发展状况,对当前中密度纤维板产业面临与造纸行业的原料竞争、刨花板和胶合板对部分中密度纤维板市场的冲击、一些中小型中密度纤维板厂的产品质量不达标这三方面的问题做了分析,并提出了加强原料林建设、加大科研投入、进一步提高产品质量等一系列解决措施。 相似文献
7.
中密度纤维板在我国得到迅速的发展。本文主要分析了我国中密度纤维板发展中关于中密度纤维板布局、建厂规模、产品品种、生产原料以及工艺设备等应注意的几个问题。 相似文献
8.
9.
10.
柠条生产中密度纤维板,在人造板用材领域尚属研究阶段,还未大规模应用在生产中。开发柠条资源,这对于节约木材、合理利用资源具有重要意义。通过原料分析、工艺试验,研究出生产中密度纤维板的较佳工艺条件,并进行了生产性试验。结果证明柠条与木材混合能够作为中密度纤维板原料,利用原有的生产条件,能生产出合格的中密度纤维板。 相似文献
11.
12.
综述了中密度纤维板的生产发展变化趋势,主要包括原料的供给、企业生产、产品环保性能以及产品结构等变化给中纤板应用领域带来的发展变化。 相似文献
13.
采用剂在油中法、添加混合型表面活性剂配制中纤板用WE-2型液状石蜡防水剂,替代熔融石蜡压制中纤板,产品性能满足中密度纤维板(GB/T 11718-1999)国家标准要求。 相似文献
14.
云南省中密度纤维板工业现状及其对策 总被引:2,自引:0,他引:2
近年来, 云南中密度纤维板工业发展迅速, 但同时暴露出一系列问题。在对云南中密度纤维板工业现状分析的基础上, 从人才、管理、产业开发应用领域以及利用研究等方面提出了云南中密度纤维板的发展对策。 相似文献
15.
Sadegh Maleki Akbar Rostampsour Haftkhani Mosayeb Dalvand Mehdi Faezipour Mehdi Tajvidi 《林业研究》2012,23(3):481-490
We determined the effects of the penetration depth and spline material and composite material type as well as joining method on bending moment resistance under diagonal compression and tension in common wood panel structures. Composite materials were laminated medium density fiberboard (MDF) and particle board. Joining methods were buttand miter types. Spline materials were high density fiber board (HDF).The penetration depths of plywood, wood (Carpinus betolus) and splinewere 8, 11 and 14 mm. The results showed that in both diagonal compression and tension, MDF joints are stronger than particle board joints,and the bending moment resistance under compression is higher compared with that in tension. The highest bending moment resistance under tension was shown in MDF, butt joined using plywood spline with 8 mm penetration depth, whereas under compression bending moment resistance was seen in MDF, miter joined with the HDF spline of 14 mm penetration depth. 相似文献
16.
司琳琳 《林业机械与木工设备》2012,(4):25-28
在传统蜂窝纸芯单元的粘结处添加一块中密度纤维板支撑条加工成木质材料强化蜂窝纸芯,然后分别将蜂窝纸芯与中密度纤维板及薄、厚胶合板覆贴形成木质材料强化蜂窝纸芯复合板。比较了三种覆面材料制成的空心板多项力学性能并分析了他们的破坏模式。 相似文献
17.
Fire resistance of thick wood-based boards 总被引:1,自引:0,他引:1
Thick wood-based boards are used as construction materials for walls and floors in Japan. In this study, fire resistance tests
(ISO 834-1) and cone calorimeter tests (ISO 5660-1) were conducted for thick plywood, particleboard, and medium density fiberboard
with sample thicknesses of about 28–30mm, and their suitabilities for quasi-fireproof or fire-preventive structures were evaluated.
In the ISO 834-1 fire resistance test, the heat-shielding performance (insulation criterion) for walls was evaluated and the
results showed that the larger the apparent density of a woodbased board, the higher its insulation performance. The insulation
performance of thick wood-based boards in the fire resistance test could be forecast from the results of the cone calorimeter
test, especially when the second peak of heat release rate appeared. In the cone calorimeter tests, the surface layer density
of the plywood, particleboard, and medium density fiberboard was the dominant parameter for the time to ignition and initial
heat release rate. These results indicate that thick wood-based board is a suitable fire-preventive construction material.
Part of this study was presented at the Annual Meeting of the Architectural Institute of Japan, Hokkaido, Japan, August 2004 相似文献
18.
研究了聚丙烯腈基活性碳纤维(PAN-ACF)对中密度纤维板(MDF)力学性能的影响,通过对比测试添加PAN-ACF中密度纤维板的静曲强度和内结合强度,得出聚丙烯腈基活性碳纤维对中密度纤维板性能的影响。 相似文献