Agronomic Efficiency of Two Types of Lime and Phosphate Fertilizer Sources in Brazilian Cerrado Soils Cultivated with Soybean

With the increase in phosphate fertilizer prices, there is a need to find lower-cost alternatives that are as efficient as soluble sources such as single (SSP) and triple superphosphate (TSP). In Brazil’s northern and northeastern regions, there are reserves of igneous rocks with low solubility containing high concentrations of total phosphorus (P) that can be used to produce fertilizers, such as thermalphosphates. To assess the efficiency of sources of P and two types of lime on soybean yield, a field experiment was carried out in an area with dystrophic Red Latosol (Oxisol) in a Cerrado region in the southern part of Maranhão State. The experimental design was randomized blocks in a 2 × 3 × 4 factorial scheme, with four replicates. The treatments were two types of lime [calcitic (CL) (<5 dag kg^?1 of MgO) and dolomitic (DL) (>13 dag kg^?1 of MgO)], three phosphate fertilizer sources [triple superphosphate (TSP), “Yoorin” thermalphosphate (YT), and experimental thermalphosphate (ET)], and four rates of phosphorus pentoxide (P₂O₅; 0, 100, 200, and 300 kg ha^?1). After 2 years of cultivation, the application of DL resulted in greater soybean yields than the application of CL. The two lime types influenced the pH, carbon (C), calcium (Ca), and magnesium (Mg) concentrations as well as the Ca/Mg, Ca/K, and Mg/K ratios in the soil. With respect to sources of P, the YT applied in the soil with DL produced an agronomic efficiency index (AEI) similar to that of TSP, whereas in the soil with CL, the TSP, YT, and ET were similar, with maximum technical efficiency (MTE) under both conditions starting at 230 kg ha^?1 of P₂O₅. The critical concentration of available phosphorus (P) in the soil (Mehlich-1 extractant) for cultivation of soybean under the climate and soil conditions studied was between 5.0 and 6.0 mg kg^?1.     

Sulfur Use Efficiency in Soybean Cultivars Adapted to Tropical and Subtropical Conditions

Sulfur (S) is an essential nutrient in crop plants and one of the components of amino acids (AAs) and proteins. Studies about sulfur efficiency on soybean cultivars [Glycine max (L) Merril] adapted to the tropical and subtropical conditions are still incipient. In Brazil, one experiment under greenhouse conditions evaluated the S-efficiency from eight soybean cultivars. The plants cultivated in a Typic Quartzipsamment received two S rates (0 and 80 mg kg^?1). The grain yield (GY), shoot dry weight (SDW), and the relative yield (RY) had influence from the S rates. The cultivars BRS 295RR and BRS 360RR were the most efficient in using the S application. The number of pods per plant (NPP), photosynthetic rate (A), nitrate reductase (N-NO₂^?), and chlorophyll significantly increased with de 80 mg kg^?1 of S. By contrast, the internal concentration of carbon dioxide (CO₂) (Ci) was reduced. Similarly, there were increases in the concentration of nitrogen (N), phosphorus (P), magnesium (Mg), and N:S ratio in the leaves and grain, but the K increased only in the leaves. Comparing the cultivars, only the N concentration in the leaves and the Mg in the grain had non-significant differences.     

Phosphorus,Potassium and Sulfur Interactions in Soybean Plants on a Typic Hapludox

Soybean (Glycine max (L.) Merril) has the largest acreage in Brazil where nutrients are provided to crops by formulated fertilizers, which is the most usual method. Under tropical and subtropical conditions, most of the nutrients required by soybean crops are phosphorus (P) and potassium (K), while sulfur (S) is applied in smaller amounts. The P, K, and S interactions under greenhouse conditions using completely randomized blocks in a factorial 3 × 3 × 3 arrangement were evaluated. The treatments were as follows: three P rates (0, 75, and 150 mg P kg^?1); three K rates (0, 150, and 300 mg K kg^?1); and three S rates (0, 50, and 100 mg S kg^?1). The P, K, and S application had a significant influence on the shoot dry weight (SDW) and number of pods per pot (NPP) in contrast with the increase in grain yield (GY) that had positive relationship with K and S rates. These results indicated that both nutrients were the most limiting to GY. In soil and leaves, only the P, K, and S concentrations were modified by the treatments (P, K, and S), but in the grains there was synergism of P rates with Mg concentration unlike K rates with Ca concentration. Physiological components as photosynthetic rate, intrinsic efficiency of water use, and chlorophyll had influence from P and K rates.     

Yield,Yield Components,Soil Chemical Properties,Plant Physiology,and Phosphorus Use Efficiency in Soybean Genotypes

Expansion of soybean [Glycine max (L.) Merrill] cultivated in Brazil to regions with low fertility soils gave rise to studies on the possibility of obtaining highly productive cultivars with high nutrient use efficiency. An experiment in greenhouse conditions was conducted to assess phosphorus (P) use efficiency (PUE) by 13 soybean genotypes. The genotypes were grown in an Ustoxix Quartzipsamment with two P rates [0 (no P application) and 150 mg P kg^?1], whose source was monoammonium phosphate (MAP, P₂O₅ 44%). Shoot dry weight (SDW), grain yield (GY), grain harvest index (GHI), relative yield (RY), and physiological components (photosynthetic rate, stomatal conductance, respiratory rate, and internal CO₂ concentration) were influenced by soybean genotypes and P rates. Genotypes BMX Apolo RR, BRS 360RR, BRS 378RR, CD 219RR, DM 2302RR, TMG 7161RR, and Vtop RR were classified as non-efficient and non-responsive to P application, while BMX Potência RR, Vmax RR, FPS Solar RR, NA 5909RR, TMG 1066RR, and M 6210 IPRO were classified as efficient and responsive. Phosphorus application increased the values of physiological components, which was not observed for N, K, Ca, Mg, and S concentration in the leaves and grains. Soybean genotypes selection for increased P efficiency could help growers overcome the problem of soybean cultivation on new areas or degraded pastures.     

Variability on Yield,Nutritional Status,Soil Fertility,and Potassium-Use Efficiency by Soybean Cultivar in Acidic Soil

The use of cultivar with nutrient-use efficiency is an important strategy in the management of plant nutritional status, particularly potassium (K), because its high demand and the progressive impoverishment caused by the use of inadequate amounts cause frequent deficiency symptoms observed in soybean [Glycine max (L.) Merrill] crops. This study was conducted in greenhouse conditions in a completely randomized design with four replicates in an Typic Quartzipsamment soil aimed to assess the effect of applying two rates of K (50 and 200 mg kg^?1) on growth, shoot dry weight yield (SDWY) and seed yield (SY), nutritional status, yield components, and efficiency of K use in eleven cultivars of different characteristics and growth habits. The SDWY, SY, number of seeds per pod, number of pods, and estimated 100-seed weight showed significant interaction between cultivar and the K rates, with greater values at the rate 200 mg K kg^?1. Similarly, the concentration of nitrogen (N), phosphorus (P), K, calcium (Ca), magnesium (Mg), sulfur (S), boron (B), copper (Cu), iron (Fe), manganese (Mn), and zinc (Zn) in leaves and grains varied according to the K rates and in the cultivar. The most K-use efficient cultivars were BMX Magna RR, BRS 232, BRS 284, BRS 294RR, NA 5909RR, and Vmax RR, whereas FTS Campo Mourão RR was inefficient. Regarding response to fertilization, the cultivars Vmax RR, BMX Magna RR, NA 5909RR, BRS 284, and BRS 294RR were found to be efficient and responsive, whereas the cultivar FTS Campo Mourão RR, BRS 232, BMX Potência RR, BRS 295RR, TMG 1066RR, and TMG 1067RR are inefficient and responsive to K application in the soil.     

Response of Soybean to Phosphorus Fertilization in Brazilian Oxisol

Soybean is an important grain crop for Brazil, and phosphorus (P) plays an important role in improving yield of this crop in Brazilian Oxisols. Data are limited on influence of P sources and rate on soybean yield, yield components, and P-use efficiency. A field experiment was conducted for 3 consecutive years to determine response of soybean to three fertilizers (single superphosphate, Yoorin, and Arad) with 0, 17.5, 35, and 52.5 kg P ha^?1 (0, 40, 80 and 120 kg P₂O₅ ha^?1). Grain yield was significantly influenced by phosphorus fertilization. Overall, maximum grain yield was produced by application of single superphosphate, followed by Yoorin and Arad. Number of grains per pod and 100-grain weights were also influenced significantly by P fertilization. Shoot dry weight, number of pods per plant, and grain harvest index had a significant positive association with grain yield. Phosphorus uptake in grain was about six times more than uptake in shoots, and P uptake in grain had a significant positive association with grain yield. Phosphorus-use efficiency (kg grain/kg P applied or uptake) decreased with increasing P rate, and it was greater for single superphosphate than for Yoorin and Arad sources of P fertilization. However, P-utilization efficiency (kg grain plus straw yield / P uptake in grain plus straw) was greater under Yoorin treatment compared to the two other sources of P.     

Soybean response to copper applied to two soils with different levels of organic matter and clay

Abstract

Increasing the amount of soil organic matter (OM) alters the availability of copper (Cu) for plants under tropical and subtropical conditions. With the aim of evaluating the effects of the OM/Cu interaction on the soybean crop, a trial was conducted with a fully randomized 2?×?5 factorial design and four replicates. The treatments consisted of five Cu rates (0, 1, 2, 4 and 8?mg kg^?1) and two soil types: Typic Oxisol and Typic Ultisol. The soybean responded to fertilization with Cu, producing the highest estimated grain yield at a rate of 4.1?mg kg^?1. Similarly were also observed for shoot dry weight, number of pods and root length. The soil chemical properties and nutrient levels in the leaves and grain were influenced only by the soil type, whereas physiological components were affected in terms of photosynthetic rate and intercellular CO₂ concentration.     

Lime and Cattle Manure in Soil Fertility and Soybean Grain Yield Cultivated in Tropical Soil

Most tropical soils have high acidity and low natural fertility. The appropriate application of lime and cattle manure corrects acidity, improves physical and biological properties, increases soil fertility, and reduces the use of chemical and/or synthetic fertilizers by crops, such as soybean, the main agricultural export product of Brazil. This study aimed to assess the effects of the combination of the application of dolomite limestone (0, 5, and 10 Mg ha^?1) and cattle manure (0, 40, and 80 Mg ha^?1) on grain yield and the chemical properties of an Oxisol (Red Latosol) cultivated with soybean for two consecutive years. The maximum grain yield was obtained with the application of 10 Mg ha^?1 of lime and 80 Mg ha^?1 of cattle manure. Liming significantly increased pH index, the concentrations of calcium (Ca²⁺) and exchangeable magnesium (Mg²⁺), and cation exchange capacity (CEC) of soil and reduced potential acidity (H⁺ + Al³⁺), while the application of cattle manure increased pH level; the concentrations of potassium (K⁺), Ca²⁺, and exchangeable Mg²⁺; and CEC of the soil. During the 2 years of assessment, the greatest grain yields were obtained with saturation of K⁺, Ca²⁺, and Mg²⁺ in CEC at the 4.4, 40.4, and 17.5 levels, respectively. The results indicated that the ratios of soil exchangeable Ca/Mg, Ca/K, K/Mg, and K/(Ca+Mg) can be modified to increase the yield of soybean grains.     

Boron and Amino Acid Foliar Application on Wheat-Soybean Intercropping in a Non-Tillage System

Micronutrient and amino acid (AA) foliar fertilization has generally been sprayed onto plants to increase the crop yield. The experiment had the aim of evaluating the foliar boron (B) and AA application on grain yield (GY), physiological characteristics, nutritional status, and yield components in wheat (Triticum aestivum L.) and soybean [Glycine max (L.) Merrill] intercropping in a non-tillage system (NTS). The experiment was set up as a randomized block design with eight treatments and four replicates. The treatments had the following boron (B) rates: [0, 1, 2, 4, and 8 kg ha^?1, source: boric acid (H₃BO₃)] + AAs (2 L ha^?1) applied by foliar spraying and the additional treatments [(Control - without B and AAs), 2 kg ha^?1 B, 2 L ha^?1 AAs and 2 kg ha^?1 B + 1 L ha^?1 AAs] applied at the end of the elongation and spike beginning of wheat plants and development growth stage (V5) of soybean for two growing seasons. Boron and AAs had no influence on the physiological and yield components and had no increases in the foliar and grain B content in wheat and soybean. No matter the dose, the foliar B + AAs (2 L ha^?1) application did not increase the GY in wheat-soybean under a rotational NTS in loamy soil with suitable available B.     

Bioavailability of Nutrients in Seeds from Tropical and Subtropical Soybean Varieties

The selection of varieties or species of plants with higher nutrient uptake efficiency and nutrient concentration for biofortification of food crops is a key tool to reduce malnutrition. Soybean (Glycine max L. Merr) is one of the most important food crops, because it is consumed directly or indirectly, in the form of seeds, processed (milk and/or derivatives), or used as a protein component of animal feed worldwide. In order to select plants with higher nutrients concentration in seeds, 24 soybean varieties for tropical and subtropical conditions and different general features were assessed. There was great variability in photosynthesis rate, chlorophyll content, seed yield (SY), and concentration and uptake of nutrients by seeds between the varieties. Not genetically modified (NGM) crops showed higher nitrogen (N), cooper (Cu), and manganese (Mn) concentration and higher N, potassium (K), Cu, iron (Fe), Mn, and zinc (Zn) uptake, while for genetically modified (GM) crops only calcium (Ca) concentrations were higher. Varieties BRS 284 and BMX Magna RR showed the highest nutrients concentrations in the group with the highest nutrient efficiency. The genetic variability observed among the varieties regarding uptake and translocation of nutrients into seeds allows selecting more promising materials to be used in the biofortification of nutrients in soybean seeds.     

Glyphosate Formulations on Nutritional Condition and Productivity of Roundup Ready Soybean

We evaluate the effect of different commercial formulations of glyphosate on the nutritional status of Roundup Ready soybeans (TMG 125). The experiment was conducted under field conditions for two agricultural years. The experimental design used was randomized blocks with four repetitions. The treatments were the implementation of Roundup Original, Trop, Roundup Ultra, Roundup WG, Roundup Transorb R and Zapp QI formulations, all at a dose of 720 g e.a. ha^?1 of glyphosate and two controls (weeding and no weeding). There was no difference in the accumulation of macronutrients. In the second year of evaluation (2011/2012), manganese (Mn) accumulation was affected by the Trop formulations, Roundup Transorb, Zapp QI, Roundup Ultra, Roundup WG. To the accumulation of zinc (Zn), there was a reduction in the application of Trop formulations and Zapp QI. However, this reduction observed did not influence the response of plants in relation to the productive yield.     

Systemic Effect of a Brassinosteroid on Root Nodule Formation in Soybean as Revealed by the Application of Brassinolide and Brassinazole

Leguminous plants form nitrogen-fixing root nodules and the number of nodules is controlled by a self-regulating mechanism called autoregulation. However, signaling substances involved in nodule regulation have not been identified. In the present study, we used brassinolide, a most effective molecular species of plant hormone brassinosteroids, and brassinazole, an effective inhibitor of brassinosteroid biosynthesis to determine whether brassinolide played a role in systemic regulation of noduel formation in wild type soybean and its super-nodulating mutant. Foliar application or direct injection of brassinolide into the root base inhibited nodule formation and root development in the super-nodulating mutant (En6500), but not in the parent line (cv. Enrei). The internodes in the plants subjected to foliar application were significantly longer than those in the untreated plants. In contrast, the application of brassinazole on mature leaves or into the culture media resulted in the increase of the nodule number in Enrei. These treatments also inhibited internodal growth in Enrei. The results indicate that brassinosteroids may regulate the nodule number in soybean plants. The function of brassinosteroids for the systemic regulation of nodule formation was examined.     

Influence of Lime and Gypsum on Yield and Yield Components of Soybean and Changes in Soil Chemical Properties

Soybean is one of the most important legume crops in the world. Two greenhouse experiments were conducted to determine the influence of liming and gypsum application on yield and yield components of soybean and changes in soil chemical properties of an Oxisol. Lime rates used were 0, 0.71, 1.42, 2.14, 2.85, and 4.28 g kg^?1 soil. Gypsum rates applied were 0, 0.28, 0.57, 1.14, 1.71, and 2.28 g kg^?1 soil. Lime as well as gypsum significantly increased grain yield in a quadratic fashion. Maximum grain yield was achieved with the application of 1.57 g lime per kg soil, whereas the gypsum requirement for maximum grain yield was 1.43 g per kg of soil. Lime significantly improved soil pH, exchangeable soil calcium (Ca) and magnesium (Mg) contents, base saturation, and effective cation exchange capacity (ECEC). However, lime application significantly decreased total acidity [hydrogen (H) + aluminum (Al)], zinc (Zn), and iron (Fe) contents of the soil. The decrease in these soil properties was associated with increase in soil pH. Gypsum application significantly increased exchangeable soil Ca, base saturation, and ECEC. However, gypsum did not change pH and total acidity (H + Al) significantly. Adequate soil acidity indices established for maximum grain yield with the application of lime were pH 5.5, Ca 1.8 cmol_c kg^?1, Mg 0.66 cmol_c kg^?1, base saturation 53%, Ca saturation 35%, and Mg saturation 13%. Soybean plants tolerated acidity (H + Al) up to 2.26 cmol_c kg^?1 soil. In the case of gypsum, maximum grain yield was obtained at exchangeable Ca content of 2.12 cmol_c kg^?1, base saturation of 56%, and Ca saturation of 41%.     

Phosphorus Nutrition of Upland Rice,Dry Bean,Soybean, and Corn Grown on an Oxisol

Rice, dry bean, corn, and soybean are important food crops. Phosphorus (P) deficiency is one of the most yield-limiting factors for these crops grown on highly weathered Brazilian Oxisols. Four greenhouse experiments were conducted to determine P requirements of these four crops. The P levels used were 0, 50, 100, 200, and 400 mg kg^?1. Growth, yield, and yield components evaluated of four crop species were significantly increased with the application of P fertilization. Most of the responses were quadratic in fashion when the P was applied in the range of 0 to 400 mg kg^?1. Maximum grain yield of upland rice was obtained with the application of 238 mg P kg^?1 of soil, maximum dry bean grain yield was obtained with the application of 227 mg P kg^?1 of soil, and maximum grain yield of soybean was obtained with the application of 224 mg P kg^?1 of soil. Maximum shoot growth of corn was obtained with the addition of 323 mg P kg^?1 of soil. Most of the growth and yield components had significant positive association with grain yield or shoot dry weight. Phosphorus concentration and uptake were greater in the grain compared to straw in upland rice and dry bean plants. Overall, P-use efficiencies decreased with increasing P rates.     

Soybean yield response to Bradyrhizobium strains in fields with inoculation history in Southern Brazil

Abstract

Soybean [Glycine max (L.) Merr.] responses to seed inoculation with rhizobium are inconsistent in sites with inoculation history. Field trials were conducted in South-central region of Paraná State (Southern Brazil) aiming to evaluate yield response to inoculation in areas with history of inoculation at a regional-scale (21 trials, 1999/2000 to 2014/2015), and identify nodulation, plant dry weight and nitrogen (N) components underpinning yield formation (10 trials, 2015/2016 and 2016/2017). Seed yield varied from 1853 to 5352?kg ha^?1 (first dataset), characterizing a wide range of environmental conditions across seasons. Response to inoculation was inconsistent at regional-scale, with a similar seed yield of inoculated (3286?kg ha^?1) and non-inoculated (3298?kg ha^?1) soybean. Lack of differences were also observed in all the variables analyzed of second dataset. Research efforts should be applied aiming to identify rhizobia persistence in the soil and its efficacy at N fixation after continuous cropping without inoculation.     

Effect of Glyphosate and Zinc Application on Yield,Soil Fertility,Yield Components,and Nutritional Status of Soybean

Glyphosate is a widely used nonselective herbicide for the control of agricultural weeds. It is being increasingly used in glyphosate resistant genetically modified plants. However, there are few studies on its effects on the nutritional status of soybean, particularly on the uptake of zinc (Zn). Two experiments were conducted under field conditions in a Typic Quartzipsamment and an Orthic Ferralsol to investigate the effect of glyphosate application × Zn interaction on soil fertility, yield components, seed yield (SY), shoot dry weight (SDW) yield, and nutritional status of soybean. The five Zn rates 0, 3, 6, 9, and 12 kg ha^?1 were used in two soybean varieties [BRS 133 (conventional—NGM) and its essentially derived transgenic line BRS 245RR (GM), which was divided into: with (+Gly) and without (–Gly) glyphosate application. Only the P (phosphorus) and Zn available concentrations in the soil were impacted by Zn rates. However, the available P concentration only decreased in the soil planted with GM soybean. Mehlich 1 and diethylenetriaminepenta acetic acid–triethanolamine (DTPA–TEA), 7.3 extractants were effective to determine the available Zn. In the two crop sites, the number of pods per plant (NPP) and the SDW yield were affected by the interaction varieties × Zn. SY was influenced by the application of the herbicide, reducing a potential phytotoxic effect with the use of high rates. Regarding the nutrients, only the foliar calcium (Ca), boron (B), iron (Fe), and manganese (Mn) concentrations were negatively affected by glyphosate, and in the case of Zn, the difference occurred only between the varieties BRS 133 and BRS 245RR.     

Growth and Zinc Uptake and Use Efficiency in Food Crops

Zinc (Zn) deficiency in annual crops is very common in Brazilian Oxisols. Data are limited on Zn uptake and use efficiency during crop growth cycles. A field experiment was conducted during two consecutive years with the objective to determine shoot dry weight and Zn uptake and use efficiency in upland rice, dry bean, corn, and soybean during growth cycles. Shoot dry weight of four crops was significantly increased in an exponential quadratic fashion with increasing plant age. Rice and corn had higher shoot dry weights and grain yields than dry bean and soybean. Zinc concentration in rice and corn decreased in a quadratic fashion with increasing plant age. However, in dry bean and soybean, Zn concentration had a quadratic increase. Zinc uptake followed an exponential quadratic response in four crops, and it was higher in corn and upland rice than in dry bean and soybean. Zinc use efficiency in shoot dry‐weight production had significant quadratic responses in upland rice and soybean with increasing plant age. In corn, Zn use efficiency for shoot dry‐weight production was linear as a function of plant age. Zinc use efficiency for grain production was maximum for corn and minimum for soybean. Hence, cereals had higher Zn use efficiency than legumes.

Zinc concentration in grain of dry bean and soybean was higher than in upland rice and corn, which is a desirable quality factor for human consumption so as to avoid Zn deficiency.     

巴西南部氧化土长期施用猪粪粪浆对土壤和地表水的影响

The accelerated expansion of swine production in Brazil has increased the generation of liquid wastes, which are usually applied to agricultural soils after a simplified treatment and pose potential environmental impacts. The objective of this study was to assess the agronomic and environmental impacts of long-term application of swine slurry(SS) on soil and stream water properties in watersheds dominated by Oxisols in Quinze de Novembro of Southern Brazil. Soil samples(0–30 cm) were collected from farms with continuous application of SS since 1990 at low(40–80 m3 SS ha-1year-1) and high(120–300 m3 SS ha-1year-1) rates of SS. Surface water samples were collected from streams adjacent to the farm fields. Long-term SS application did not change total organic C and particulate organic C compared to cropland and woodland soils without SS application. The high rates of SS increased total N, P, Cu,and Zn and available P and Cu in the topsoil(0–10 cm) compared to woodland and cropland soils without SS application. Surface water analyses showed that fecal coliform bacteria and biological oxygen demand exceeded the legal limits for high quality water(Class 1). Other water parameters(such as NO-3, phosphate and total suspended solids) were within the acceptable limits. Long-term disposal of SS in cropland under no-tillage had impaired water quality in Quinze de Novembro, especially biological parameters. Some best management practices should be adopted, including more rigorous control of SS application to cropland as well as requiring edge-of-field and riparian vegetative buffers.     

Relative Efficiency of Two Sulfur Sources Regarding Nitrogen Fixation and Yield of Chickpea

Field experiments were conducted at two different locations (Barani Agriculture Research Institute Chakwal and farmer's field in Talagang) in northern rainfed Punjab, Pakistan, to assess relative efficiency of two sources of sulfur (S) in enhancing nitrogen (N) fixation and yield of chickpea (Cicer arietinum L.). The treatments were four combinations of two levels of S (15 and 30 kg ha^?1) from two sources [gypsum and ammonium sulfate (AS)] and a no-S control. Application of S significantly increased seed yield up to 12% and 14% at Chakwal and Talagang, respectively. Response (kg seed yield kg^?1 S) at economic optimum dose (EOD) was greater for AS than for gypsum. Sulfur application enhanced the S uptake at both locations significantly. Sulfur harvest index and S economic yield efficiency ratio were greater at Talagang than at Chakwal. Sulfur application resulted increases in N uptake by 19% and 20% and N fixation by up to 19% and 30% at Chakwal and Talagang, respectively. Ammonium sulfate was more effective in increasing N fixation and uptake as compared to gypsum at Chakwal, whereas the difference between the two sources was nonsignificant at Talagang. Thus, it can be concluded that S should be applied to chickpea crop to enhance yield and improve soil fertility status as result of greater amount of N fixed.     

Effect of sulfur source and rates on yield and yield components of soybean in subtropical soils

Abstract

The supply of sulfur (S) fertilizers, such as phosphogypsum, to new agricultural frontiers has been hindered by the high cost of freight. However, this problem could be resolved by utilizing deposits of rock in the affected regions. Accordingly, a greenhouse study was designed to evaluate the effect of S source and rate on soybean yield. Five S rates (0, 50, 100, and 200?mg kg^?1) and five S sources (S-phosphogypsum, S-Niquelândia rock, S-Araripina rock, S-Grajaú rock, and S-Sulfurgran [90% S0?+?10% bentonite]) were applied to soybean grown in two soil types (Typic Ultisol and Typic Oxisol), which differ in clay content. Regardless of soil type, the application of P-phosphogypsum resulted in a higher grain yield. However, application of the other S sources also improved grain yield as well as total dry weight; S application, in general, improved soybean yield components (number of grains per pod, number of pods per pot, and weight of pods per pot), photosynthetic rate, chlorophyll content, and the S levels of leaves and grains as well as the available sulfate (SO₄^2-) levels in the soil. Therefore, for soybean grown in Typic Ultisol and Typic Oxisol, different S sources effectively improve a variety of variables that ultimately improve grain yield.