Zinc Tolerance in Wheat Cultivars as Affected by Varying Levels of Phosphorus

Abstract

The effect of zinc–phosphorus (Zn‐P) interaction on Zn efficiency of six wheat cultivars was studied. The higher dry matter yields were observed when Zn was applied at 5 µg g^?1 soil than with no Zn application. Phosphorus applications also increased dry matter yield up to the application of 25 µg P g^?1 soil. The dry matter yield was significantly lower at the P rate of 250 µg g^?1 soil. At the Zn‐deficient level, the Zn‐efficient cultivars had higher Zn concentrations in the shoots. Zinc concentrations in all cultivars increased when the P level in the soil was increased from 0 to 25 µg P g^?1 soil except for the cv. Durati, in which Zn concentrations decreased with increases in P levels. However, when Zn×P interactions were investigated, it was observed that at a Zn‐deficient level, Zn concentrations in the plant shoot decreased with each higher level of P, and more severe Zn deficiency was observed at P level of 250 µg g^?1 soil.     

Uptake and Translocation of Copper in Brassicaceae

Abstract

Ten cvs. of four Brassicaceae species were tested to evaluate their copper (Cu) uptake and translocation. Germination and root length tests indicated that Brassica juncea cv. Aurea and Raphanus sativus cvs. Rimbo and Saxa were the species with the highest germinability and longest roots at Cu concentrations ranging from 25 up to 200 µM. Raphanus sativus cv. Rimbo grown in hydroponic culture at increasing Cu concentrations (from 0.12 up to 40 µM) for 10 days produced a relatively high biomass (17.2 mg plant^?1) at the highest concentration and had a more efficient Cu translocation (17.8%) in comparison with cvs. Aurea and Saxa. The potential of cv. Rimbo for Cu uptake was then followed for 28 days at 5, 10, and 15 µM Cu. In comparison with the control, after 28 days of growth the 15 µM Cu‐treated plants showed a reduction in the tolerance index (?40%) and in the above‐ground dry biomass (?19%). On the contrary, an increase in the below‐ground dry weight was observed (+35%). Copper accumulated during the growth period both in the below‐ and above‐ground parts (about 14 and 4 µg plant^?1 at 10 and 15 µM Cu, respectively), but the translocation decreased from 50 to 30% in the last week at all the concentrations used. In addition, cv. Rimbo grown in a multiple element [cadmium (Cd), chromium (Cr), Cu, lead (Pb), and zinc (Zn)] naturally‐contaminated site accumulated all elements in the above‐ground part in a range from 5 to 62 µg plant^?1.     

Annual and Seasonal Variations of Trace Metals in Atmospheric Suspended Particulate Matter in Islamabad, Pakistan

Total Suspended particulate matter (TSP) in urban atmosphere of Islamabad was collected using a high volume sampling technique for a period of one year. The nitric acid–perchloric acid extraction method was used and the metal contents were estimated by atomic absorption spectrophotometer. The highest mean concentration was found for Ca at 4.531 µg/m³, followed by Na (3.905 µg/m³), Fe (2.464 µg/m³), Zn (2.311 µg/m³), K (2.086 µg/m³), Mg (0.962 µg/m³), Cu (0.306 µg/m³), Sb (0.157 µg/m³), Pb (0.144 µg/m³) and Sr (0.101 µg/m³). On an average basis, the decreasing metal concentration trend was: Ca > Na > Fe > Zn > K > Mg > Cu > Sb > Pb > Sr > Mn > Co > Ni > Cr > Li > Cd ≈ Ag. The TSP levels varied from a minimum of 41.8 to a maximum of 977 µg/m³, with a mean value of 164 µg/m³, which was found to be higher than WHO primary and secondary standards. The correlation study revealed very strong correlations (r?>?0.71) between Fe–Mn, Sb–Co, Na–K, Mn–Mg, Pb–Cd and Sb–Sr. Among the meteorological parameters, temperature, wind speed and pan evaporation were found to be positively correlated with TSP, Ca, Fe, K, Mg, Mn and Ag, whereas, they exhibited negative relationships with relative humidity. On the other hand, Pb, Sb, Zn, Co, Cd and Li revealed significant positive correlations with relative humidity and negative with temperature, wind speed and pan evaporation. The major sources of airborne trace metals identified with the help of principle component analysis and cluster analysis were industrial emissions, automobile exhaust, biomass burning, oil combustion, fugitive emissions, resuspended soil dust and earth crust. The TSP and selected metals were also studied for seasonal variations, which showed that Na, K, Zn, Cu, Pb, Sb, Sr, Co and Cd peaked during the winter and remained lowest during the summer, while Ca, Fe, Mg and Mn were recorded highest during the spring.     

The Nature and Distribution of Metals in Soils of the Sydney Estuary Catchment, Australia

Total topsoil 50th percentile Cu, Pb and Zn concentrations (n?=?491) in the Sydney estuary catchment were 23 ??g?g^?1, 60 ??g?g^?1 and 108 ??g?g^?1, respectively. Nine percent, 6% and 25% of samples were above soil quality guidelines, respectively and mean enrichment was 14, 35 and 29 times above background, respectively. Soils in the south-eastern region of the catchment exhibited highest metal concentrations. The close relationship between soil metal and road network distributions and outcomes of vehicular emissions modelling, strongly suggested vehicular traffic was the primary source of metals to catchment soils. Catchment soil and road dust probably make an important contribution to contamination of the adjacent estuary. The concentration of soil metals followed the land use trend: industrial?>?urban?>?undeveloped areas. A high proportion (mean 45%, 62% and 42%, for Cu, Pb and Zn, respectively) of metals in the soils may be bioavailable.     

Heavy‐Metal Contamination of Soil and Vegetables in Wastewater‐Irrigated Agricultural Soil in a Suburban Area of Hanoi,Vietnam

The To Lich and Kim Nguu Rivers, laden with untreated waste from industrial sources, serve as sources of water for irrigating vegetable farms. The purposes of this study were to identify the impact of wastewater irrigation on the level of heavy metals in the soils and vegetables and to predict their potential mobility and bioavailability. Soil samples were collected from different distances from the canal. The average concentrations of the heavy metals in the soil were in the order zinc (Zn; 204 mg kg^?1) > copper (Cu; 196 mg kg^?1) > chromium (Cr; 175 mg kg^?1) > lead (Pb; 131 mg kg^?1) > nickel (Ni; 60 mg kg^?1) > cadmium (Cd; 4 mg kg^?1). The concentrations of all heavy metals in the study site were much greater than the background level in that area and exceeded the permissible levels of the Vietnamese standards for Cd, Cu, and Pb. The concentrations of Zn, Ni, and Pb in the surface soil decreased with distance from the canal. The results of selective sequential extraction indicated that dominant fractions were oxide, organic, and residual for Ni, Pb, and Zn; organic and oxide for Cr; oxide for Cd; and organic for Cu. Leaching tests for water and acid indicated that the ratio of leached metal concentration to total metal concentration in the soil decreased in the order of Cd > Ni > Cr > Pb > Cu > Zn and in the order of Cd > Ni > Cr > Zn > Cu > Pb for the ethylenediaminetetraaceitc acid (EDTA) treatment. The EDTA treatment gave greater leachability than other treatments for most metal types. By leaching with water and acid, all heavy metals were fully released from the exchangeable fraction, and some heavy metals were fully released from carbonate and oxide fractions. The concentrations of Cd, Cr, Cu, Ni, Pb, and Zn in the vegetables exceeded the Vietnamese standards. The transfer coefficients for the metals were in the order of Zn > Ni > Cu > Cd = Cr > Pb.     

Hg, Cu, Pb, Cd, and Zn Accumulation in Macrophytes Growing in Tropical Wetlands

The concentrations of Hg, Cu, Pb, Cd, and Zn accumulated by regional macrophytes were investigated in three tropical wetlands in Colombia. The studied wetlands presented different degrees of metal contamination. Cu and Zn presented the highest concentrations in sediment. Metal accumulation by plants differed among species, sites, and tissues. Metals accumulated in macrophytes were mostly accumulated in root tissues, suggesting an exclusion strategy for metal tolerance. An exception was Hg, which was accumulated mainly in leaves. The ranges of mean metal concentrations were 0.035?C0.953 mg g^?1 Hg, 6.5?C250.3 mg g^?1 Cu, 0.059?C0.245 mg g^?1 Pb, 0.004?C0.066 mg g^?1 Cd, and 31.8?363.1 mg g^?1 Zn in roots and 0.033?C0.888 mg g^?1 Hg, 2.2?C70.7 mg g^?1 Cu, 0.005?C0.086 mg g^?1 Pb, 0.001?C0.03 mg g^?1 Cd, and 12.6?C140.4 mg g^?1 Zn in leaves. The scarce correlations registered between metal concentration in sediment and plant tissues indicate that metal concentrations in plants depend on several factors rather than on sediment concentration only. However, when Cu and Zn sediment concentrations increased, these metal concentrations in tissues also increased in Eichhornia crassipes, Ludwigia helminthorriza, and Polygonum punctatum. These species could be proposed as Cu and Zn phytoremediators. Even though macrophytes are important metal accumulators in wetlands, sediment is the main metal compartment due to the fact that its total mass is greater than the corresponding plant biomass in a given area.     

Toxicity of heavy metals (Zn,Cu, Cd,Pb) to vascular plants

The literature on heavy metal toxicity to vascular plants is reviewed. Special attention is given to forest plant species, especially trees, and effects at low metal concentrations, including growth, physiological, biochemical and cytological responses. Interactions between the metals in toxicity are considered and the role of mycorrhizal infection as well. Of the metals reviewed, Zn is the least toxic. Generally plant growth is affected at 1000 μg Zn L^?1 or more in a nutrient solution, though 100 to 200 µg L^?1 may give cytological disorders. At concentrations of 100 to 200 μg L^?1, Cu and Cd disturb metabolic processes and growth, whereas the phytotoxicity of Pb generally is lower. Although a great variation between plant species, critical leaf tissue concentrations affecting growth in most species being 200 to 300 μg Zn g^?1 dry weight, 15 to 20 μg Cu g^?1 and 8–12 μg Cd g^?1. With our present knowledge it is difficult to propose a limit for toxic concentrations of Zn, Cu, Cd and Pb in soils. Besides time of exposure, the degree of toxicity is influenced by biological availability of the metals and interactions with other metals in the soil, nutritional status, age and mycorrhizal infection of the plant.     

Pb/Ca in Thailand Coral Determined by LA-ICP-MS: Anthropogenic Pb Input of River Run-off into a Coral Reef from Urbanised Areas

In order to monitor lead pollution from urban areas to coral reefs in the Gulf of Thailand, linear and two-dimensional distributions of Pb in corals from Khang Khao Island, Thailand and Rukan-sho, Okinawa, were analysed with high resolution. Laser ablation inductively coupled plasma mass spectrometry was applied to measure Pb content in coral skeletons using synthetic Pb standards in a CaCO₃ matrix as calibration materials. Linear and two-dimensional ablation schemes were applied to determine the Pb content in corals collected from Khang Khao Island, Thailand and Rukan-sho, Okinawa. The coral skeleton was ablated by Nd:YAG laser (wavelength of 266 nm, beam diameter of 155 µm, scanning speed of 10 µm s^?1 and frequency of 10 Hz) along the growth axis, and ion counts for ²⁰⁸Pb were normalised to ⁴²Ca. Lead content in the corals was determined using a calibration curve obtained from the synthetic Pb standards (0–141 µg g^?1). The linear ablation track of the sample from Khang Khao showed over 30 peaks of Pb with an average value of 3.55 µg g^?1, while Pb content in the coral from Rukan-sho showed relatively small variation with an average value of 0.132 µg g^?1. Two-dimensional imaging of Pb in the coral skeletons was also carried out for an area of 7?×?20 mm on the sample from Khang Khao. The distribution patterns of Pb and Ba in the Thailand coral co-varied. These observations from the linear and imaging analyses suggest discontinuous inputs of anthropogenic Pb from rivers to the Gulf of Thailand.     

Substrate‐Induced Respiration of a Sandy Soil Treated with Different Types of Organic Waste

A sandy soil was amended with different types of sewage sludge (digested, dried, and composted) and pig slurry. The composted sludges displayed higher organic‐matter stability (39–45%) than only digested sludge (26–39%) or digested + dried sludge (23–32%). The microbial biomass of the dried sludge was undetectable. Digested and composted sludges and pig slurry displayed microbial biomasses (12492–13887 µg g^?1, 1221–2050 µg g^?1, and 5511 µg g^?1, respectively) greater than the soil (108 µg g^?1). The wastes were applied at seven doses, ranging from 10 to 900 g kg^?1. Soils were incubated for 28 days. Substrate‐induced respiration (SIR) was measured for 12 consecutive hours on day 1 and on day 28. The results showed that SIR increased with the dose of organic amendment. However, SIR decreased when moderate doses of pig slurry or high doses of digested + dried sludge were tested. The possibility of using this inhibition as an ecotoxicological indicator is discussed.     

Impact of Pseudomonads and Ethylene on the Cadmium and Nickel Rhizofiltration of Sunflower,Squash, and Indian Mustard

Three hydroponic experiments were set up to study the rhizofiltration of cadmium (Cd) or nickel (Ni) from artificially contaminated nutrient solution with sunflower, squash, or Indian mustard. After 48 h of exposure with 2 mg L^?1 Cd‐contaminated water, 460, 415, or 1092 µg Cd g^?1 (dry weight) was detected in roots of 33‐day‐old sunflower and squash or in 50‐day‐old Indian mustard, respectively. As calculated, 1 g of root dry matter of the tested crop species removed 5.7–12.4% of total Cd content present in the nutrient solution. It was supposed that pseudomonads (soil rhizoplane bacteria) and the plant growth hormone ethylene can enhance the specific surface of roots and hence roots' metal adsorption capacity. As a trend, pretreatment of Indian mustard with Pseudomonas fluorescens bacteria enhanced slightly the Cd (from 1793 to 2346 µg g^?1) or Ni (from 1088 to 1192 µg g^?1) concentration of roots. Cadmium concentration in roots was also enhanced from 2694 to 3273 µg g^?1 when the roots of Indian mustard were pretreated with Cd‐tolerant rather than Cd‐sensitive Pseudomonas cepacia. In spite of the occurrence of new root hairs, the pretreatment of roots with ethylene proved to be ineffective in enhancement of the Cd rhizofiltration capacity of Indian mustard.     

Optimizing the Nutritional Status of a Typic Kandiustult of Kerala,India, Using Sorption Study

Abstract

Nutrient sorption studies were carried out as a part of a mega project on “Yield maximization in cassava (Manihot esculenta Crantz) through systematic approach in fertilizer use” to find out the sorption characteristics of major, secondary, and micronutrients [i.e., phosphorus (P), potassium (K), sulfur (S), copper (Cu), zinc (Zn), manganese (Mn), and boron (B)] in a typic kandiustult of Kerala, India. The sorption curve fitted by using this study along with the results of preliminary soil analysis and critical level of these nutrients were used to optimize the nutritional status of this soil. Sorption study revealed that P, K, S, and B were limiting and others were sufficient for this soil. The quantities of the limiting nutrients required to optimize the soil nutritional status were estimated from the sorption curve as P, K, S, and B at 136 µg mL^?1, 0.338 meq 100 mL^?1, 20 µg mL^?1, and 6.025 µg mL^?1, respectively.     

Arsenic and heavy metal accumulation by Athyrium yokoscense from contaminated soils

Abstract

Athyrium yokoscense, a type of fern that grows vigorously in mining areas in Japan, is well known as a Cd hyperaccumulator as well as a Cu, Pb and Zn tolerant plant. However, no information is available on As accumulation of A. yokoscense, although it often grows on soils containing high levels of both heavy metals and As. In this study, young ferns collected from a mine area were grown in media containing As-spiked soils or mine soil in a greenhouse for 21 weeks. Athyrium yokosense was highly tolerant to arsenate and survived in soils containing up to 500 mg As (V) kg^?1. The addition of 100 mg As (V) kg^?1 resulted in the highest fern biomass (1.95 g plant^?1) among As-spiked soils. Although the As concentration of the fern was lower than other As hyperaccumulators, such as Pteris vittata, A. yokoscense could hyperaccumulate As in mature and old fronds. Arsenic was accumulated most efficiently in old fronds (922 mg kg^?1) in the media containing 5 mg As (III) kg^?1. Moreover, higher As accumulation was found in the roots of the ferns, with a range from 506 to 2,192 mg kg^?1. In addition, in the mine soil with elevated concentrations of As and heavy metals, A. yokoscense not only hyperaccumulated As (242 mg As kg^?1 in old fronds), but also accumulated Cd, Pb, Cu and Zn at concentrations much higher than those reported for other terrestrial plants. Athyrium yokoscense accumulated Cd mostly in fronds in high concentrations, up to 1095 mg kg^?1, while it accumulated Cu, Zn and Pb mainly in the roots and the concentrations were 375, 2040 and 1165 mg kg^?1, respectively.     

Remediation of Metal Contaminated Soil by Organic Metabolites from Fungi I—Production of Organic Acids

Investigations were made on living strains of fungi in a bioremediation process of three metal (lead) contaminated soils. Three saprotrophic fungi (Aspergillus niger, Penicillium bilaiae, and a Penicillium sp.) were exposed to poor and rich nutrient conditions (no carbon availability or 0.11 M d-glucose, respectively) and metal stress (25 µM lead or contaminated soils) for 5 days. Exudation of low molecular weight organic acids was investigated as a response to the metal and nutrient conditions. Main organic acids identified were oxalic acid (A. niger) and citric acid (P. bilaiae). Exudation rates of oxalate decreased in response to lead exposure, while exudation rates of citrate were less affected. Total production under poor nutrient conditions was low, except for A. niger, for which no significant difference was found between the poor and rich control. Maximum exudation rates were 20 µmol oxalic acid g^?1 biomass h^?1 (A. niger) and 20 µmol citric acid g^?1 biomass h^?1 (P. bilaiae), in the presence of the contaminated soil, but only 5 µmol organic acids g^?1 biomass h^?1, in total, for the Penicillium sp. There was a significant mobilization of metals from the soils in the carbon rich treatments and maximum release of Pb was 12% from the soils after 5 days. This was not sufficient to bring down the remaining concentration to the target level 300 mg kg^?1 from initial levels of 3,800, 1,600, and 370 mg kg^?1in the three soils. Target levels for Ni, Zn, and Cu, were 120, 500, and 200 mg kg^?1, respectively, and were prior to the bioremediation already below these concentrations (except for Cu Soil 1). However, maximum release of Ni, Zn, and Cu was 28%, 35%, and 90%, respectively. The release of metals was related to the production of chelating acids, but also to the pH-decrease. This illustrates the potential to use fungi exudates in bioremediation of contaminated soil. Nonetheless, the extent of the generation of organic acids is depending on several processes and mechanisms that need to be further investigated.     

Behavior of Metals Under Different Seasonal Conditions: Effects on the Quality of a Mexico–USA Border River

Spatial and seasonal mobilization trends of metals in surface water were evaluated in the US–Mexico San Pedro River (SPR). Water samples were collected at five sampling stations for the analysis of dissolved oxygen, pH, electric conductivity, sulfates, and metals (Cd, Cu, Fe, Mn, Pb, and Zn). Quality of the water was characterized through Ecological Criteria of Water Quality (ECWQ) established in Mexico and Water Quality Criteria (Environmental Protection Agency (EPA)). High total metal concentrations were detected as follows: Fe?>?Cu?>?Mn?>?Zn?>?Pb?>?Cd. Metal concentrations were slightly higher in dry season than in rainy season: Cd (below detection limit (BDL)–0.21 mg L^?1), Cu (BDL–13 mg L^?1), Fe (0.16–345 mg L^?1), Mn (0.12–52 mg L^?1), Pb (BDL–0.48 mg L^?1), and Zn (0.03–17.8 mg L^?1). Low pH and dissolved oxygen values as well as high sulfate content were detected in both seasons. High values of metals (Cd, Cu, Fe, Mn, Pb, Zn) were detected at station E1 representing pollution source, as well as at stations E2 (Cd, Cu, Fe, Mn), E3 (Fe, Mn, Pb), and E4 and E5 (Fe, Mn). Detected concentrations exceeded maximum permissible established in ECWQ and Water Quality Criteria (EPA). Efflorescence salts on sediments in the dry season could increase levels of metals in water column. This study provides valuable information on the potential mobility of metals in surface water of SPR located in an arid environment where transport processes are strongly linked to climate. The information derived from this study should help the regional and national authorities to address present environmental regulations.     

Fraction Distributions of Lead,Cadmium, Copper,and Zinc in Metal‐Contaminated Soil before and after Extraction with Disodium Ethylenediaminetetraacetic Acid

Abstract: The fraction distributions of heavy metals have attracted more attention because of the relationship between the toxicity and their speciation. Heavy‐metal fraction distributions in soil contaminated with mine tailings (soil A) and in soil irrigated with mine wastewater (soil B), before and after treatment with disodium ethylenediaminetetraacetic acid (EDTA), were analyzed with Tessier's sequential extraction procedures. The total contents of lead (Pb), cadmium (Cd), copper (Cu), and zinc (Zn) exceeded the maximum permissible levels by 5.1, 33.3, 3.1, and 8.0 times in soil A and by 2.6, 12.0, 0.2, and 1.9 times in soil B, respectively. The results showed that both soils had high levels of heavy‐metal pollution. Although the fractions were found in different distribution before extraction, the residual fraction was found to be the predominant fraction of the four heavy metals. There was a small amount of exchangeable fraction of heavy metals in both contaminated soils. Furthermore, in this study, the extraction efficiencies of Pb, Cd, and Cu were higher than those of Zn. After extraction, the concentrations of exchangeable Pb, Cd, Cu, and Zn increased 84.7 mg·kg^?1, 0.3 mg·kg^?1, 4.1 mg·kg^?1, and 39.9 mg·kg^?1 in soil A and 48.7 mg·kg^?1, 0.6 mg·kg^?1, 2.7 mg·kg^?1, and 44.1 mg·kg^?1 in soil B, respectively. The concentrations of carbonate, iron and manganese oxides, organic matter, and residue of heavy metals decreased. This implies that EDTA increased metal mobility and bioavailability and may lead to groundwater contamination.     

Enhanced Heavy Metal Phytoextraction from Marine Dredged Sediments Comparing Conventional Chelating Agents (Citric Acid and EDTA) with Humic Substances

Metal (Cu, Mn, Ni, Zn, Fe) concentrations in marine sediment and zooplankton were investigated in Izmir Bay of the Eastern Aegean Sea, Turkey. The study aimed to assess the levels of metal in different environmental compartments of the Izmir Bay. Metal concentrations in the sediment (dry weight) ranged between 4.26–70.8 μg g^?1 for Cu, 233–923 μg g^?1 for Mn, 14.9–127 μg g^?1 for Ni, 25.6–295 μg g^?1 for Zn, 12,404–76,899 μg g^?1 for Fe and 38,226–91,532 μg g^?1 for Al in the Izmir Bay. Maximum metal concentrations in zooplankton were observed during summer season in the inner bay. Significant relationships existed between the concentrations of certain metals (Al, Fe, Mn and Ni) in sediment, suggesting similar sources and/or similar geochemical processes controlling such metals. Higher concentrations of Cu, Zn and percent organic matter contents were found in the middle-inner bays sediments. Based on the correlation matrix obtained for metal data, organic matter was found to be the dominant factor controlling Cu and Zn distributions in the sediment. In general, mean Cu and Zn levels in the bay were above background concentrations in Mediterranean sediments. Zooplankton metal concentrations were similar to sediment distributions.     

History and Trends of Sediment Contamination by Heavy Metals Within and Close to a Marine Area of National Interest: The Ligurian Sea off Cogoleto-Stoppani (Genoa, Italy)

Due to its remarkable sediment pollution caused by past industrial activities, the Mediterranean coastal area facing the town of Cogoleto (near Genoa) has been declared of “national interest”. Seven sediment cores were analysed to provide information on history and trend of heavy metal inputs, with a particular focus on Cr. Grain-size compositions and ²¹⁰Pb chronologies account for a strong influence of terrigenous inputs near the coast and the mouth of the Lerone Creek (draining the industrial settlement), with sand contents and accumulation rates varying from 40.3% and 0.7 cm year^?1 near shore to 2.5% and 0.1 cm year^?1 offshore. Heavy metal concentrations are high, notably Cr and Ni, and to a lesser extent, Ag, Hg, Pb, Cu and Zn. Cr, that shows past values up to 3,642 µg g^?1, presents only minor recent decreases. In the area, it has both natural and anthropogenic sources and their relative contributions were distinguished on the basis of Cr/Ni ratios. These are 1–1.5 in soils and rocks of the Lerone Creek catchment area but reach very high values (up to 10) in marine sediments due to the anthropogenic contribution. The anthropogenic influence is higher near the creek mouth, gradually decreases offshore and is negligible at the most distal site (ca. 2.9 km from the coast).     

Heavy metal distribution in different soil aggregate size classes from restored brackish marsh,oil exploitation zone,and tidal mud flat of the Yellow River Delta

Purpose

Heavy metal distribution in soils is affected by soil aggregate fractionation. This study aimed to demons trate the aggregate-associated heavy metal concentrations and fractionations in “sandy,” “normal,” and “mud” soils from the restored brackish tidal marsh, oil exploitation zone, and tidal mudflat of the Yellow River Delta (YRD), China.

Materials and methods

Soil samples were sieved into the aggregates of >2, 0.25–2, 0.053–0.25, and <0.053 mm to determine the concentrations of exchangeable (F1), carbonate-bound (F2), reducible (F3), organic-bound (F4), and residual fraction (F5) of Cd, Cr, Cu, Ni, Pb, and Zn.

Results and discussion

The 0.25–2 mm aggregates presented the highest concentrations but the lowest mass loadings (4.23–12.18 %) for most metal fractions due to low percentages of 0.25–2 mm aggregates (1.85–3.12 %) in soils. Aggregates <0.053 mm took majority mass loadings of metals in sandy and normal soils (62.04–86.95 %). Most soil aggregates had residual Cr, Cu, Ni, Zn, and reducible Cd, Pb dominated in the total Cd, Cr, Cu, Ni, Pb, and Zn concentrations. Sandy soil contained relatively high F4, especially of Cu (F4) in 0.25–2 mm aggregates (10.22 mg kg^?1), which may relate to significantly high organic carbon contents (23.92 g kg^?1, P?<?0.05). Normal soil had the highest total concentrations of metals, especially of Cu, Ni, and Pb, which was attributed to the high F3 and F5 in the <0.053 mm aggregates. Although mud soil showed low total concentrations of heavy metals, the relatively high concentrations of bioavailable Cd and Cu resulted from the relatively high Cd (F2) and Cu (F2) in the >2 mm aggregates indicated contribution of carbonates to soil aggregation and metal adsorption in tidal mud flat.

Conclusions

Soil type and aggregate distribution were important factors controlling heavy metal concentration and fractionation in YRD wetland soil. Compared with mud soil, normal soil contained increased concentrations of F5 and F3 of metals in the 0.053–0.25 mm aggregate, and sandy soil contained increased concentrations of bioavailable and total Cr, Ni, and Zn with great contribution of mass loadings in the <0.053 mm aggregate. The results of this study suggested that oil exploitation and wetland restoration activities may influence the retention characteristics of heavy metals in tidal soils through variation of soil type and aggregate fractions.

     

Improvement of wheat (Triticum aestivum) drought tolerance by seed priming with silicon

Silicon has the potential to improve drought tolerance in crops. Seeds primed with silicon were used in the present study to explore its potential benefit to withstand water stress. Seeds of two wheat varieties, NARC-2009 and Chakwal-50, were sown in pots after priming with distilled water and different concentrations (0.5%, 1.0% and 1.5%) of silicon sources (silicic acid, sodium silicate and silica gel) at PMAS, Arid Agriculture University, Rawalpindi. Maximum silicon uptake at three-leaf stage (0.028 µg g^?1 dry weight (DW)), anthesis (0.072 µg g^?1 DW) and maturity (0.103 µg g^?1 DW) was recorded for silica gel. Silicon uptake increased significantly in response to increase in Si concentration from 0.5% to 1.5%. Leaf membrane stability index, epicuticular wax, relative water content and proline remained maximum – 78.90%, 2.6 mg g^?1 DW, 83.88% and 54.90 µg g^?1 – for silica gel treatments compared with others. Silica gel with 1.5% silicon concentration resulted in maximum spike length (14.3 cm), biological yield (7.63 g pot^?1), hundred-grain weight (3.97 g pot^?1) and grain yield (2.46 g pot^?1). Based on the study outcomes, it is concluded that silica gel might be a good priming option with 1.5% silicon concentration to establish plant under drought stress.     

Influence of pH on the release and chemical fractionation of heavy metals in sediment from a suburban drainage stream in an arid mine-based oasis

Purpose

The objectives of this study were to explore the influences of pH on the release of Cu, Zn, Cd, Pb, Ni, and Cr in sediments derived from the upstream, middle, and downstream reaches of Dongdagou stream in Gansu Province, Northwest China, and to examine the fractionation changes of heavy metals in the sediments after reaching their release equilibrium under different pH conditions.

Materials and methods

Sediment samples were obtained using a stainless steel grab sampler to collect the uppermost 10 cm of sediment from the channel bed. The pH-dependent release experiment was conducted in the solid-to-liquid ratio of 1:20 at different pH values (2, 4, 6, 8, 10, and 12) at room temperature. The total Cu, Zn, Cd, Pb, Ni, and Cr concentrations in the sediments were digested using an acid digestion mixture (HNO₃ + HF + HClO₄) in an open system. Metal fractionation of selected sediments was obtained using the Tessier sequential extraction procedure. Heavy metal concentrations in the samples were determined using atomic absorption spectrophotometry.

Results and discussion

The mean concentrations of heavy metals in sediments decreased in the following order: Zn (1676.67 mg kg^?1) > Pb (528.65 mg kg^?1) > Cu (391.34 mg kg^?1) > Cr (53.48 mg kg^?1) > Ni (34.27 mg kg^?1) > Cd (11.53 mg kg^?1). Overall, the solubility of Cu, Zn, Cd, Pb, and Ni decreased with increasing pH, and they were strongly released at pH 2. Moreover, the solubility of Cr increased with increasing pH, and its release was highest at pH 12. After reaching the release equilibrium of heavy metals under different pH conditions, the percentages of organic Cu, Zn, Cd, and Fe-Mn oxyhydroxide Pb decreased, compared to their initial fractions. The residual fractions of Ni and Cr were dominant, regardless of pH.

Conclusions

The average concentrations of Cu, Zn, Cd, and Pb in sediments were highly elevated compared with the soil background values in Gansu Province, China. The results of this pH-dependent release experiment showed that the release behaviors of Cu, Zn, Pb, and Cr followed an asymmetric V-shaped pattern, whereas Cd and Ni followed an irregular L-shaped pattern. The changes in the release of heavy metals in sediments were related to their redistribution between chemical fractionations.