Response of Chickpea Cultivars to Application of Boron in Boron‐Deficient Calcareous Soils

Abstract

This study was conducted to investigate the effects of four boron (B) doses (control, 0 kg B ha^?1; B₁, 1 kg B ha^?1; B₂, 3 kg B ha^?1; and B₃, 6 kg B ha^?1) in soils deficient in available B (0.19 mg B kg^?1) and lime (CaCO₃) content (20.7%) on yield and some yield components of five chickpea (Cicer arietinum L.) genotypes, namely Akçin‐91, Population, Gökçe, ?zmir‐92, and Menemen‐92 in central Anatolian Turkey in the 2002 and 2003 growing seasons. Plant height, pods per plant, grain yield, protein content, protein yield, thousand seed weight, and leaf B concentration were measured. Grain yields in all genotypes (except for Gökçe) were significantly increased by 1 kg ha^?1 B application. Application of 1 kg ha^?1 B increased the yield by an average of 5%. Genotypes studied showed significant variations with respect to their responses to additional B. Akçin‐91 gave the highest grain yield (1704.8 kg ha^?1) at 3 kg B ha^?1, whereas Population, ?zmir‐92, and Menemen‐92 yielded best (1468.2 kg ha^?1, 1483.0 kg ha^?1, and 1484.7 kg ha^?1, respectively) at 1 kg B ha^?1. Interestingly, Gökçe reached to the highest level of grain yield (1827.1 kg ha^?1) at the control. Gökçe was a B deficiency B tolerance genotype. The other genotypes appeared to have high sensitivity to B deficiency. This study showed that B deficiency could result in significant yield losses in chickpea under the experimental conditions tested. Thus, B contents of soils for the cultivation of chickpea should be analyzed in advance to avoid yield losses.     

Nitrogen‐Supplying Capacity of Soils for Rice and Wheat and Nitrogen Availability Indices in Soils of Northwest India

Abstract

Quantitative assessment of soil nitrogen (N) that will become available is important for determining fertilizer needs of crops. Nitrogen‐supplying capacity of soil to rice and wheat was quantified by establishing zero‐N plots at on‐farm locations to which all nutrients except N were adequately supplied. Nitrogen uptake in zero‐N plots ranged from 41.4 to 110.3 kg N ha^?1 for rice and 33.7 to 123.4 kg N ha^?1 for wheat. Availability of soil N was also studied using oxidative, hydrolytic, and autoclaving indices, salt‐extraction indices, light‐absorption indices, and aerobic and anaerobic incubation indices. These were correlated with yield and N uptake by rice and wheat in zero‐N plots. Nitrogen extracted by alkaline KMnO₄ and phosphate borate buffer and nitrogen mineralized under aerobic incubation were satisfactory indices of soil N supply. For rice, 2 M KCl and alkaline KMnO₄ were the best N‐availability indices. Thus, alkaline KMnO₄ should prove a quick and reliable indicator of indigenous soil N supply in soils under a rice–wheat cropping system.     

Distribution of Forms of Zinc and Their Association with Soil Properties and Uptake in Different Soil Orders in Semi‐arid Soils of Punjab,India

Abstract

Profiles of semi‐arid–zone soils in Punjab, northwest India, were investigated for different forms of zinc (Zn), including total, diethylenetriamine penta‐acetic acid (DTPA)-extractable, soil solution plus exchangeable (Zn), Zn adsorbed onto inorganic sites, Zn bound by organic sites, and Zn adsorbed onto oxide surfaces. Irrespective of the different fractions of Zn present, its content was higher in fine‐textured Alfisols and Inceptisols than in coarse‐textured Entisols. In general, the higher content of Zn was observed in the surface horizon and then decreased in the subsurface horizons. However, none of the forms of Zn exhibited any consistent pattern of distribution. Organic matter and size fractions (clay and silt) had a strong influence on the distribution of different forms of Zn. Based upon the linear coefficient of correlation, the soil solution plus exchangeable Zn, adsorbed onto inorganic sites, and DTPA‐Zn increased with increase in organic carbon but decreased with increase in pH and calcium carbonate content. Total Zn increased with increase in clay and silt content. Among the different forms, Zn bound by organic sites, water soluble plus exchangeable Zn and Zn adsorb onto oxide (amorphous surfaces) were all correlated with DTPA extractable Zn. The uptake of Zn was more in recent floodplain Entisols than very fine textured Alfisols and Inceptisols. Among the different forms soil solution +exchangeable and DTPA‐extractable Zn was positively correlated with total uptake of Zn.     

Forms of Iron and Their Association with Soil Properties in Four Soil Taxonomic Orders of Arid and Semi‐arid Soils of Punjab,India

Profiles of arid and semi‐arid zones soils of Punjab, northwestern India, were investigated for different forms of iron (Fe): total Fe, diethylenetriamine penta‐acetic acid (DTPA)–extractable Fe, soil solution plus exchangeable Fe, Fe adsorbed onto inorganic sites and oxide surfaces, and Fe bound by organic sites. Irrespective of the different fractions of Fe present, its content was higher in the fine‐textured Alfisols and Inceptisols than in the coarse‐textured Entisols and Aridisols. Lower content of total Fe was observed in the surface horizon and then increased in the subsurface horizons, whereas no set pattern was observed in Entisols. Also, irrespective of the soil orders, the contents of different forms of Fe were higher in the surface horizon and then decreased by depth. None of the forms of Fe exhibited any consistent pattern of distribution.

Organic matter and the content of clay and silt fractions had a strong bearing on the distribution of forms of Fe. Based on a linear coefficient of correlation, the soil solution plus exchangeable Fe adsorbed onto inorganic sites and DTPA‐extractable Fe increased with increase in soil organic carbon but decreased with increase in soil pH and calcium carbonate content. Total Fe increased with increase in cation exchange capacity (CEC) and clay and silt content. The results also revealed that there was equilibrium in different fractions of this element. Among the different Fe forms, Fe bound by organic sites, water‐soluble plus exchangeable Fe, and Fe adsorbed onto oxides (amorphous surfaces) were positively correlated with the DTPA‐extractable Fe. Though some forms are interrelated, none of the forms had any relationship with the total Fe.     

Comparison of Multi-element to Single‐Element Extractants for Macro‐ and Micronutrients in Acid Soils from Spain

Abstract

Different chemical reagents are used to assess plant‐available nutrients from soils with similar properties. The use of different extractants is a serious limitation when comparing results between different soil‐testing laboratories, often leading to large differences in fertilizer recommendations for similar crops.

In this study, 80 samples from acid soils from Galicia (Spain) were used to compare several soil nutrient extractants. Traditional and tested extractants for acid soil such as Bray 2 and ammonium acetate were used to evaluate multielement extractants such as ethylenediaminetetraacetic acid–ammonium acetate (EDTA‐aa), ammonium bicarbonate–diethylenetriaminepentaacetic acid (AB‐DTPA), and Mehlich 3.

Linear regression analyses were performed to relate the amount of each nutrient obtained by traditional soil extractants to the amount obtained by multielement extractants. Strong correlation was found between extractable Bray 2 P and Mehlich 3 P (r²=0.97, slope=0.87, and intercept=?0.48). The slope of the regression line between EDTA‐aa‐extractable calcium (Ca) and that from ammonium acetate (Aa) approached 1∶1 (r²=0.86). Similar results were obtained for magnesium (Mg) (r²=0.99). Soil zinc (Zn) concentrations extracted by Mehlich 3 and EDTA‐aa were similar; slope of the regression line was 0.95 (r²=0.88). With regard to copper (Cu), Mehlich 3 extracted approximately 20% more Cu than EDTA‐aa.

The results showed that Mehlich 3 and EDTA‐aa are suitable for assessment of plant available phosphorus (P), potassium (K), Ca, Mg, Cu, Zn, and iron (Fe) in acid soils.     

Comparison of Extraction Procedures Used in Determination of Phosphorus Species by 31P‐NMR in Chilean Volcanic Soils

Abstract

Four procedures were employed to extract phosphorus (P) from volcanic soils for ³¹P‐NMR experiments. The procedures involve 0.5 M NaOH extraction, 0.5 M NaOH and Chelex 100 cation exchange resin extraction, NaOH‐EDTA extraction, and HCl‐NaOH two step sequential extraction with Chelex 100 clean up. Results showed that inorganic‐P, monoester‐P, diester‐P and pyrophosphate were present. Their detection was dependent on the extraction procedure used.

The NaOH procedure gives only a broad and vaguely defined signal with poor signal to noise ratio. The incorporation of Chelex 100 in the extraction enhanced the signal to noise ratio and allowed the distinction of inorganic‐P, monoester‐P, diester‐P and pyrophosphate. The two step sequential extraction involving HCl, NaOH, and Chelex 100 significantly improve the signal to noise ratio. The NaOH‐EDTA extraction procedure is efficient only in samples with low OC contents.

When soils have low OC content, any of the four extraction procedures can be successfully used. If the OC and the Fe concentration in the extracted solutions are high, the Chelex 100 became essential in clean up the metallic ions. Both the NaOH and Chelex 100 and the HCl‐NaOH‐Chelex produced satisfactory results and the later procedure by far the best resolved spectra.     

Heavy‐Metal Concentration of Sewage‐Contaminated Water and Its Impact on Underground Water,Soil, and Crop Plants in Alluvial Soils of Northwestern India

Abstract

Heavy‐metal concentration in underground and surface water, soil, and crop plants growing in farmers' fields near the industrial city of Ludhiana, Punjab, India, that receive irrigation with water contaminated with sewer and untreated industrial effluents was studied. The concentrations of lead (Pb), chromium (Cr), cadmium (Cd), and nickel (Ni) in sewage‐contaminated water were 18, 80, 88, and 210 times higher than in shallow handpump water, and 21, 133, 700, and 2200 times higher than in deep tube‐well water, respectively. The concentrations of Cd and Ni in shallow handpump underground water were significantly higher than in deep tube‐well underground water. The concentrations of Pb, Cr, Cd, and Ni in deep tube‐well water were 0.017, 0.003, 0.0002, and 0.0002 mg L^?1, respectively. Soils irrigated with sewage‐contaminated water had higher electrical conductivity, cation exchange capacity, organic carbon (C), and clay content but had lower pH and calcium carbonate content compared to soils irrigated with deep underground water. The concentrations of diethylenetriamine pentaacetic acid (DTPA)–extractable Pb, Cr, Cd, and Ni in soils irrigated with sewage‐contaminated water were 1.8, 35.5, 3.6, and 14.3 times higher, and total concentrations of these heavy metals were 1.5, 3.0, 3.7, and 2.2 times higher than that in soils irrigated with deep underground water. The mean concentrations of Pb, Cr, Cd, and Ni in crop plants growing on soils irrigated with sewage‐contaminated water were 4.88, 4.20, 0.29, and 3.99 mg kg^?1, which were 1.2, 2.1, 8.7, and 1.9 times higher than in plants irrigated with deep tube‐well water, respectively. The amounts of potentially toxic metals were significantly and positively correlated with cation exchange capacity and organic C content and negatively correlated with soil pH. In conclusion, long‐term accumulation of toxic metals in soils and their uptake by crop plants has a high potential for phytotoxicity as well as for entering into the food chain. The findings also suggest contamination of underground shallow drinking water through leaching of some highly mobile metals.     

Evaluation of Nutrient Release in Salt‐Saturated Soils

Abstract

The effects of irrigating with saline water on native soil fertility and nutrient relationships are not well understood. In a laboratory experiment, we determined the extent of indigenous nutrient [calcium (Ca), magnesium (Mg), potassium (K), manganese (Mn), and zinc (Zn)] release in salt-saturated soils. Soils were saturated with 0, 75, and 150 mmolc L^?1 sodium chloride (NaCl) solution and incubated for 1, 5, 10, and 15 days. The saturation extracts were analyzed for pH, ECe, and water‐soluble Ca, Mg, K, Mn, and Zn, and the remainder soil samples were analyzed for exchangeable forms of these elements. In a subexperiment, three soil types (masa, red‐yellow, and andosol) were saturated individually either with 100 mmolc L^?1 of NaCl, sodium nitrate (NaNO₃), or sodium sulfate (Na₂SO₄) salt. These salts were also compared for nutrient release. Soils treated with NaCl released higher amounts of water‐soluble than exchangeable nutrients. Except for Zn, the average concentrations of these nutrients in the soil solution increased significantly with time of incubation, but concentrations of the exchangeable forms varied inversely with time of incubation. The masa soil exhibited the highest concentrations of Ca and Mg, whereas K was highest in andosol. The extract from soils treated with NaCl contained greater amounts of soluble cations, whereas soils treated with Na₂SO₄ produced the lowest concentration of these elements irrespective of the type of soil used.     

Molybdenum Determination in Mehlich‐1 and Mehlich‐3 Soil Test Extracts and Molybdenum Adsorption in Brazilian Soils

Abstract

The extractant Mehlich‐1 is routinely used in Brazil for determination of soil nutrients, whereas Mehlich‐3 has been suggested as a promising extractor for soil fertility evaluation. Both were used for extraction of molybdenum (Mo) in Brazilian soils with Mo dosage by the KI+H₂O₂ method. The Langmuir and Freundlich isotherms were used to study soil Mo adsorption. Mehlich‐1 extracted more Mo than Mehlich‐3 in soils with high contents of organic matter, clay, and iron (Fe) oxides. Mehlich‐3 and Mehlich‐1 extractions correlated positively and significantly with amorphous Fe oxides, crystalline Fe oxides, and organic matter. Molybdenum recovering rates correlated to crystalline Fe oxides and clay contents but not to organic matter, pH, and Mo adsorption capacity. Amorphous and crystalline Fe oxides, clay, and organic matter were responsible for most of the Mo adsorption. The Langmuir isotherm described better the Mo adsorption to soil amorphous Fe oxides and organic matter than the Freundlich isotherm.     

Chemical Behavior of Chromium in Soils: Ⅲ. Mechanism of Cr(Ⅵ) Adsorption by Soils

An analysis of Cr (Ⅵ)-sorbed surface of the soils by using a scanning electron microscope and an electron probe microscope has proved that aluminium is the chief element affecting Cr (Ⅵ) adsoption. As the ionic strength of the solution increased, the amounts of Cr (Ⅵ) adsorbed by goethite and soils decreased. Cr (Ⅵ) adsorption was greatly depressed in the presence of SO₄^2-, WO₄^2-, MoO₄^2-, HPO₄^2- and H₂PO^4- which competed for anion adsorption sites. The depressing extent of these anions was found to follow the sequence: HPO₄^2-, H₂PO^4->MoO₄^2->WO₄^2->SO₄^2->>Cl^-, NO^3-. The amounts of Cr (Ⅵ) desorption varied with different extractants.     

Adsorption of Chloride, Nitrate and Perchlorate by Variable Charge Soils

Two cells consisting of a chloride-selective electrode and a nitrate-selective electrode or of a chloride-selective electrode and a perchlorate-selective electrode were directly put in the soil suspension to determine the concentration ratios Cl-/ NO3- or Cl-/ ClO4- for studying the adsorption of the three anions by variable charge soils. It was found that all the concentration ratios CCl- / CNO3- and CCl- / CClO4- in suspension were smaller than unity when soil samples were in equilibrium with mixed KCl and KNO3 or KCl and KClO4 solutions of equal concentration. The order of the amount of chloride, nitrate and perchlorate adsorbed by variable charge soils was Cl-> NO3-> ClO4- when the soils adsorbed these anions from the solution containing equal concentrations of Cl-, NO3- and ClO4-. Such factors as the pH of the suspension, the iron oxide content of the soil etc. could affect the amounts and the ratios of anions adsorbed.     

Modified Soil‐Test Methods for Extractable Phosphorus in Acidic,Neutral, and Alkaline Soils

Abstract

Although numerous soil‐test methods for estimating extractable phosphorus (P) have been developed around the world, their results are difficult to compare because of the very different scale levels used. In the present study, the Bray–Kurtz method (Bray‐P) is used as a reference value. Two other methods [lactate‐P and sodium bicarbonate (NaHCO₃)‐P] were modified to facilitate the comparison of extractable‐P determinations, mainly by adjusting the shaking time. These three methods were applied to 101 soil samples from an extensive region of Argentina with soil pH values ranging from 5.5 to 8.5. The results confirm that the Bray‐P and the two modified methods (lactate‐P and NaHCO₃‐P) determine similar contents of extractable P but are not applicable to all types of soils and conditions. Equations that minimize the statistical error were selected for soil properties such as organic carbon (OC) content, pH, soluble salts, and calcium carbonate content. Correlation coefficients between Bray‐P and NaHCO₃‐P increased to 0.91 and 0.95 in soils with high and low OC levels, respectively. It was also demonstrated that the lactate‐P test is not suitable for soils rich in calcium carbonate or soluble salts. These two modified methods are expected to be useful for testing P values that impact agricultural production.     

Types of Crystalline Iron Oxides and Phosphate Adsorption in Variable Charge Soils

The types,contents and morphologies of crystalline Fe oxides and their relations to phosphate adsorption on the clay fractions in soils with varable charge in southern China were investigated by means of XRD,TEM,EMA and chemical analysis methods.Results indicated that the types and contents of crystalline Fe oxides varied with the soils examined.The dominant crystaline Fe oxide was hematite in the latosols and goethites in the red soils.In yellow-brown soils,the only crystalline Fe oxide was goethite.The difference between Ald and Alo came mainly from the Al Substituting for Fe in the Fe oxides.The crystal morphology of goethite appeared mainly as subrounded flat or iso-dimensional rather than acicular particles,Hematities occurred in plates of various thickness,Their MCDa/MCDc ratios in the latosols and red soils were generally above 1.5 and below 1.5,respectively.The MCD values of goethites and hematites were 15-25nm and 20-35nm,and their specific surface areas were 80-120m^2/g and 35-75m^2/g,respectively.The goethite crystals were generally smaller,Variations of the total amounts of crystalline Fe oxides in clay fractions were not related to plhophats adsorption.The types,contents and morphologies of crystalline Fe oxides in the soils remarkably affected phosphate adsorption characteristics of the soils.The phosphate adsorption of goethite was much greater than that of hematite,The higher th MCDa/MCDc ratio of hematite,the lower the phosphate adsorption.     

Effect of Ionic Strength and pH on Cadmium Adsorption by Brazilian Variable‐Charge Soils

Batch adsorption experiments were conducted to assess the effects of pH and ionic strength (I) on cadmium (Cd) adsorption by two Brazilian Oxisols. Adsorption envelopes were constructed through soil sample reactions with 0.01, 0.1, and 1 mol L^?1 calcium nitrate [Ca(NO₃)₂] solutions containing 5 mg L^?1 of Cd, with an increasing pH value from 3 to 8. The adsorption increased drastically with increasing pH, varying from 20 to 90% in a narrow pH range (4–6 in topsoil and 5–6 in subsoil). Gibbs energy (ΔG) for Cd adsorption was negative, and the phenomenon became more thermodynamically spontaneous with an increase in pH. Under the standard 0.01 mol L^?1 I and at pH close to natural, the ΔG values ranged from ?796 to ?3427 J mol^?1. No effect of I was observed on the ΔG values for Cd adsorption at pH values less than 6. At values greater than pH 6, sharp changes in the Cd adsorption pattern were observed on subsoil samples. The only soil attribute significantly correlated with the spontaneity of Cd adsorption was the effective cation exchange capacity, ECEC (r = 0.97; p < 0.1).     

Investigation of Aluminum‐Tolerant Species in Acid Soils of South China

Abstract

The low‐hilly regions in South China are mainly covered with Ultisols and Alfisols with a pH of 4.5–6.0. The major factor limiting crop performance is soluble aluminum (Al) in acid soils, resulting in phytotoxicity in susceptible species. An investigation in Jiangxi and Zhejiang provinces in South China showed that many plants including some native plants and cultivated crops (total of 27 species) could grow well in acid soils of these areas. The Al‐accumulating capacity in leaves varied greatly from species to species. Camellia oleifera Abel accumulated more than 13,500 mg kg^?1 Al in old leaves; Camellia sinensis (L.) O. Kuntze, Fagopyrum esculentum Moench, and Dicranopteris pedata (Houtt.) Nakaike accumulated more than 1000 mg kg^?1 Al in leaves; and Oryza sativa L., Eucalyptus globulus Labill., Citrus reticulata Blanco, and Brassica chinensis L. accumulated less than 200 mg kg^?1 Al in leaves. This investigation provides an important basis for further exploring Al accumulation and resistant mechanisms in plants.     

Comparative Evaluation of Inductively Coupled Plasma–Atomic Emission Spectroscopy and Colorimetric Methods for Determining Hot-Water-Extractable Boron in Soils

Frequency of boron (B) deficiency is increasing in rainfed systems, and hence there is a need to diagnose the deficiency. Colorimetric methods are still widely used in soil-testing laboratories in India for measuring B. Little information is available on the comparative evaluation of the colorimetric and inductively coupled plasma (ICP) methods for determining extractable B in soils. We describe results of the comparative evaluation of these methods for measuring extractable B in 57 soil samples with pH values ranging from 5.3 to 9.5. There was a significant correlation between B values determined by the two methods, and the correlation coefficient was greater for soil samples with pH in the neutral to alkaline range. Interaction between soil samples and methods (ICP or colorimetric) was significant except for soil samples in the pH range of 8.0 to 9.5. Precision for B determination was greater with the ICP than with the colorimetric method.     

Boron partitioning in B‐sprayed and unsprayed fruiting twigs of hazelnut

Abstract

Following B sprays, fruit set increase in ‘Barcelona’ hazelnut was accompanied by a decrease in dry‐matter accumulation for the entire fruiting twig. In unsprayed controls prior to 5 June, leaves constituted 80% of the total dry weight of a fruiting twig. Later in the season (5 Aug.) the percent dry weight was maximum in the nut tissue (66%), followed by leaves (17%), and then husks (13%). Leaves contained 87% of the total B in a fruiting twig early in the season, indicating that the leaf was a major sink for B at that time. Of the net B increases over a 2 months period, 24% was in the leaves, 38% in the nuts, and 37% in the husks. By 5 Aug., compared to other tissues, stem dry matter (3%) and B content (32) was negligible; hence, the stem was of little importance in overall partitioning. Boron sprays did not alter B partitioning in the fruiting twigs.     

Amaranthus Tricolor Has the Potential for Phytoremediation of Cadmium‐Contaminated Soils

Phytoremediation is a developing technology that uses plants to clean up pollutants in soils. To adopt this technology to cadmium (Cd)–contaminated soils efficiently, a Cd hyperaccumulator with fast growth rate and large biomass is required. In the present study, we selected Caryophyllales as a potential clade that might include Cd hyperaccumulators because this clade had a high mean concentration of zinc (Zn), which is in the same element group as Cd. Three species in Caryophyllales and three species in different clades were grown with Cd. Among them, Amaranthus tricolor showed high accumulating ability for Cd under both water‐culture and soil‐culture conditions, whereas Brassica juncea, a known Cd hyperaccumulator, accumulated high concentrations of Cd in shoots only under water‐culture conditions. This result suggests that A. tricolor has Cd‐solubilizing ability in rhizosphere. Because A. tricolor has large biomass and high growth rate, this species could be useful for phytoremediation of Cd‐contaminated fields.     

Mineralization and Transformation of Nitrogen Derived from Plant Materials in Soils over 10 Years

Results of a 10-year decomposition experiment indicated that the annual mineralization rate of organic N in newly-formed humus varied with the type of original plant materials and the water regimes for decomposition,ranging from 0.028 to 0.074.The mineralization rate under waterlogged conditions was higher than that under upland conditions.The proportion of α-amino acid N in humus newly-formed under waterlogged conditions was slightly higher than that under upland conditions.It decreased gradually with time,while the proportion of nonhydrolyzable N showed no consistent trend,irrespective of the water regines for decomposition.The distribution of amino acids in humus newly-formed from different plant materials under various water regimes was quite similar with that in original plant materials,and only minor differences could be found among them.For example,in comparison to original plant materials,the newly-formed humus contained higher proportions of isoleucine,cysting,γ-amino-butyric acid and ornithine,and lower proportions of phenylalanine and proline.Moreover the proportion of phenylalanine was higher in the humus newly-fored under waterlogged conditions than that under upland conditions.