Effect of Sulfur and Iron on Enzymatic Activity and Chlorophyll Content of Mungbean

ABSTRACT

A field trial was conducted at Rajasthan Agricultural University, Bikaner, India, in the summers of 2002 and 2003 to determine the effect of sulfur (S) in improving iron (Fe) nutrition of mungbean (Vigna radiata L.) grown on calcareous soils. The experiment was laid out in a split-plot design with three replications. Four levels of sulfur (0, 20, 40, and 60 kg S ha^?1) were applied in main plots. In sub-plots, eight levels of Fe were replicated. Three levels of Fe were applied as a basal application of FeSO₄ (0, 12.5, and 25.0 kg FeSO₄ ha^?1) and the remaining five were applied as a foliar application of 0.5% FeSO₄ at branching, flowering, and at both branching and flowering with or without 0.1% citric acid. The results of the experiment revealed that application of sulfur at the higher doses had a significant positive effect on activities of catalase, ascorbate peroxidase, guaiacol peroxidase, synthesis of chlorophyll, and active Fe content of green leaves compared with lower doses. Application of 0.5% FeSO₄ and 0.1% citric acid at both branching and flowering had no effect. The best results were recorded with basal application of 25.0 kg FeSO₄ in combination with 40 kg S ha^?1. The frequency of foliar application had an appreciable effect on chlorophyll synthesis, enzymatic activities, and active Fe content in green leaves. Plants that received foliar application of 0.5% FeSO₄ + 0.1% citric acid at both branching and flowering responded more than those that received treatment at either branching or flowering. For best results, it is suggested to use 25.0 kg FeSO₄ ha^?1 in a basal application along with 40 kg S ha^?1, as plants require most of their S and Fe at the early growth stages.     

Response of Wheat Plants to Zinc,Iron, and Manganese Applications and Uptake and Concentration of Zinc,Iron, and Manganese in Wheat Grains

This experiment was conducted at Zahak Agricultural Research Station in the Sistan region in southeast Iran. A factorial design with three replications was used to determine the effects of zinc (Zn), iron (Fe), and manganese (Mn) applications on wheat yield, Zn, Fe, and Mn uptakes and concentrations in grains. Four levels of Zn [soil applications of 0, 40, and 80 kg ha^?1 and foliar application of 0.5% zinc sulfate (ZnSO₄) solution], two levels of iron sulfate (FeSO₄; 0 and 1%) as foliar application, and two levels of Mn (0 and 0.5%) also as foliar application were used in this study. Results showed that the interactive effects of Zn and Mn were significant on the number of grains in each spike. The highest number of grains resulted from the application of 80 kg ZnSO₄ ha^?1 and foliar Mn. The interactive effects of Zn and Fe were significant on weight of 1000 grains. The highest weight of 1000 grains resulted from application of 80 kg Zn and foliar Fe. Application of 80 kg ZnSO₄ ha^?1 alone and 80 kg ZnSO₄ ha^?1 with foliar application of Mn significantly increased grain yield in 2003. The 2‐year results showed that foliar application of Zn increased Zn concentration and Fe concentration in grains 99% and 8%, respectively. Foliar application of Fe resulted in a 21% increase in Fe concentration and a 13% increase in Zn concentration in grains. The foliar application of Mn resulted in a 7% increased in Mn concentration in grains.     

Scaling-up of boron sources for yield and quality of large seeded peanut cultivars under varied agro-ecological conditions in India

Boron (B) deficiency is a common factor in light-textured soils causing poor pod filling and yield in large seeded peanut. Field trials were conducted in soils having 0.20–0.45 mg kg^?1 available B to find out the effectiveness of commercial-grade B sources in large seeded peanuts. B application induced early flowering, increased pods, yield and yield attributes, shelling and 100-seed weight. Soil application of 2.0 kg B ha^?1 as commercial-grade Agricol, Solubor and Borosol increased these parameters to a similar degree as obtained by borax, but were superior over their foliar applications. Similarly, the responses of foliar applications of 1.0 kg B ha^?1 as Chemiebor, Solubor and Borosol were more effective in humid areas. However, foliar applications led to scorching of peanut leaves during dry weather. Thus, soil application of 2.0 kg B ha^?1 is essential to enhance productivity and pod filling in large seeded peanut.     

Waterlogging of cotton calls for caution with N fertilization

Abstract

The main objective of this investigation was to evaluate the effects of nitrogen on waterlogging resistance in terms of changes in dry-matter accumulation, root antioxidant enzyme activities, root vigor, and photosynthesis under waterlogging during the flowering and boll-development stage. Cotton plants grown in pots with three N levels (0, 4.5, and 9.0 g N pot^?1, equivalent to 0, 240, and 480 kg N ha^?1, respectively) were subjected to waterlogging for eight days and then permitted to recover for fifteen days. The dry weights of root and shoot were decreased by waterlogging, and were highest at 240 kg N ha^?1. In waterlogged root, the activities of superoxide dismutase and catalase decreased and that of peroxidase increased in comparison with the control. The application of N increased the activities of catalase and peroxidase of both waterlogged root and the control, but decreased superoxide dismutase activity. Malondialdehyde content, an indicator of membrane lipid peroxidation, was significantly increased, and was lowest in the 240 kg N ha^?1 N treatment during waterlogging. Both root vigor and canopy apparent photosynthesis rate, which were weakened by waterlogging, reached a peak at 240 kg N ha^?1. At the 15th day after termination of waterlogging, N application promoted root vigor and canopy apparent photosynthesis rate of waterlogged cotton plants. These results indicated that an appropriate N supply (240 kg N ha^?1) may contribute to waterlogging resistance of cotton by adjusting the antioxidant enzyme activities of root, reducing lipid peroxidation and boosting root vigor; however, excessive N supply (480 kg N ha^?1) may lead to an adverse impact on waterlogging resistance of cotton. Therefore, the application of N should be reduced to decrease stress when waterlogging occurs, and additional N fertilizer may be used to promote cotton growth after waterlogging.     

Effect of zinc application methods on apparent utilization efficiency of zinc and phosphorus fertilizers under basmati rice–wheat rotation

To examine the effect of zinc (Zn) application method on the utilization of phosphorus (P) from applied P fertilizer, a field experiment was conducted on basmati rice–wheat rotation with combinations of Zn levels (0, soil application of 2.5 kg Zn ha ^{– 1} and two foliar applications of 2.0 kg Zn ha ^–1) and P levels (0, soil application of 8.7, 17.5 and 26.2 kg P ha ^–1). The highest pooled grain yields of basmati rice and wheat were obtained with soil application of 17.5 kg P ha ^–1 and foliar applications of 2 kg Zn ha ^–1. Foliar applications of Zn increased the P concentration in grain and straw and the total P uptake by basmati rice and the P concentration in flag leaves of wheat significantly, while soil or foliar application of Zn increased the total P uptake of wheat. Phosphorus application increased the Zn concentration in flag leaves, grain and straw of basmati rice and in grain and straw of wheat and the total Zn uptake of both crops. Phosphorus levels up to 17.5 kg P ha ^–1 increased utilization efficiency of soil or foliar application of Zn. Zinc application increased the P utilization efficiency of basmati rice and wheat up to 17.5 kg P ha ^–1 level; foliar Zn application was more effective in a wheat crop than a rice crop.     

Effect of zinc application methods on apparent utilization efficiency of zinc and potassium fertilizers under rice-wheat rotation

Apparent utilization of zinc (Zn) and potassium (K) fertilizers was examined in rice (Oryza sativa L.)-wheat (Triticum aestivum L.) using combinations of no K; soil applied K levels and no Zn; soil and foliar applied Zn. Application of 33.2 kg K ha^?1 in rice and 24.9 kg K ha^?1 in wheat along with foliar spray of 2 kg Zn ha^?1 at 30 and 60 days gave the highest mean grain yields. Foliar application of zinc increased Zn concentration in flag leaves, grain, and straw of rice and wheat and K concentration in flag leaves of rice and straw of wheat significantly. Potassium application increased Zn concentration in rice grain and straw and K concentration in wheat straw significantly. Zinc and K increased the uptake of each other in grain; straw and total uptake by both crops significantly. Zinc fertilizer enhanced the utilization of soil K. Potassium fertilizer enhanced the utilization of applied Zn.     

Effects of exogenous SA supplied with different approaches on growth,chlorophyll content and antioxidant enzymes of peanut growing on calcareous soil

To assess the role of salicylic acid (SA) supplied with 5 approaches in alleviating chlorosis induced by iron (Fe) deficiency in peanut plants growing on calcareous soil, SA was supplied as soil incorporation, making slow-release particles, seed soaking, irrigation and foliar application. SA application, particularly, SA supplied by slow release particles, dramatically increased growth parameters, yield and quality of peanut, and increased Fe concentration in peanut grain. Meanwhile, SA application increased the H⁺-ATPase activity, reduced pH of soil, increased Fe³⁺-Chelate Reductase (FCR) activity in roots, and increased Fe concentration in roots. Furthermore, SA increased active Fe content and increased chlorophyll content. In addition, SA improved enzymes activities containing superoxide dismutase (SOD), peroxidase (POD) and catalase (CAT), and protected Fe deficiency induced oxidative stress. Therefore, SA has a good effect on alleviating chlorosis induced by Fe deficiency on calcareous soil. However, in the 5 SA supplied approaches, foliar application and making slow release particles were more effective.     

ELEMENTAL SULFUR IMPREGNATED WITH IRON AS A FERTILIZER SOURCE FOR KENTUCKY BLUEGRASS

Elemental sulfur (S) impregnated with Fe (S-Fe) fertilizer was evaluated on Kentucky bluegrass (KBG; Poa pratensis L.) in three glasshouse studies: (1) with/without Fe as S-Fe, ferrous sulfate (FS), or iron-ethylenediamine-N,N’-bis(2-hydroxyphenylacetic acid) (Fe-EDDHA) to soil (49 kg Fe ha^?1), or foliar Fe-EDDHA (5 kg Fe ha^?1) on two cultivars; (2) 0, 49, 197, or 592 kg Fe ha^?1 of S-Fe deep mixed or surface mixed on two soils; (3) 0 or 49 kg Fe ha^?1 applied as S-Fe on four cultivars. A field study comparing 0 and 49 kg Fe ha^?1 applied as S-Fe to KBG was also conducted. Soil applied S-Fe was assimilated in shoots as efficiently as Fe-EDDHA applied to soil or foliage. Shoot Fe increased significantly with increasing S-Fe in a curvilinear response when deep mixed with soil and in a linear response when surface applied. However, no Fe source tested impacted yield or verdure in these studies.     

Zinc Application Effects on Yield and Seed Oil Content of Sunflower Grown on a Saline Calcareous Soil

ABSTRACT

Two field experiments (2000–2001 and 2001–2002) were conducted at two nearby fields in the Qanavat region of Qom province, central Iran, to investigate the effects of zinc (Zn) fertilization on production of sunflower. The experiment was conducted in a randomized complete block design with six treatments in three replicates. Treatments were: Zn₀ (non-Zn fertilized), Zn₁₀, Zn₂₀, Zn₃₀, and Zn₆₀ (soil application of 10, 20, 30, and 60 kg Zn ha^?1, respectively), and Zn_Spray (foliar spraying of 0.5 kg Zn ha^?1 using ZnSO₄). Seeds of sunflower (Helianthus annuus cv. ‘Record’) were planted on June 20, 2000 and June 15, 2001. At harvest, shoot and seed yields as well as concentration of Zn, iron (Fe), manganese (Mn), sodium (Na), and chloride (Cl) in leaves of sunflower were determined. Addition of 20 kg Zn ha^?1 significantly increased seed production and shoot dry-matter yield of sunflower, while other Zn treatments had no significant effect on shoot dry-matter yield, or decreased it. The thousand-seed weight was the yield component most affected by Zn fertilization, while plant height and head diameter did not change. The maximum content of seed oil was achieved under the Zn₁₀ treatment, then decreased at higher rates of soil-applied Zn such that oil content of seed under the Zn₃₀ and Zn₆₀, treatments was significantly lower than that of the control. Seed oil content was unaffected by foliar spraying of Zn. The concentration of Zn in sunflower leaves was increased with an increase in soil-added Zn of from 0 to 60 kg Zn ha^?1. The highest leaf concentrations of Zn (162 and 175 mg kg^?1 day matter (DM) in the first and second year, respectively) were achieved by foliar application of ZnSO₄. Leaf concentration of Fe was significantly increased in the Zn₂₀ treatment compared with the control but decreased at the higher rates of soil-added ZnSO₄. Soil addition of different levels of ZnSO₄ decreased concentration of Na and Cl in leaves. The lowest concentration of Na and Cl in leaves was observed under Zn₂₀. The results of this study suggest that soil application of a suitable amount of Zn has a positive effect on both quantitative and qualitative yield of sunflower in saline, calcareous soils.     

Effect of Foliar Application of Phosphorus on Winter Wheat Grain Yield,Phosphorus Uptake,and Use Efficiency

ABSTRACT

One would expect foliar applied phosphorus (P) to have higher use efficiencies than when applied to the soil, but limited information is available concerning this. Experiments were conducted in 2002, 2003, and 2004 to determine the effect of foliar applications of P on winter wheat grain yields, P uptake, and use efficiency. Twelve treatments containing varying foliar P rates (0, 1, 2, and 4 kg ha^{? 1} in 2002 and 2003 and additional 8, 12, 16, and 20 kg ha^{? 1} in 2004) with and without pre-plant rates of 30 kg ha^{? 1} were evaluated. Foliar applications of P at Feekes 7 generally increased grain yields and P uptake versus no foliar P. Use efficiency was higher when P was applied at Feekes 10.54. Results from this study suggested that low rates of foliar applied P might correct mid-season P deficiency in winter wheat, and that might result in higher P use efficiencies.     

Foliar Applied Phosphorous Enhanced Growth,Chlorophyll Contents,Gas Exchange Attributes and PUE in Wheat (Triticum aestivum L.)

A pot experiment was conducted to evaluate the foliar applied phosphorous with and without pre-plant dose (50 kg hac.^?1) of phosphorous on growth, chlorophyll contents, gas exchange parameters and phosphorous use efficiency (PUE) of wheat. The experiment was conducted in net house at Department of Crop Physiology, University of Agriculture Faisalabad, Pakistan. Two promising wheat cultivar AARI 2011 and FSD 2008 were used as a test crop with 5 foliar phosphorus (P) rates (0, 2, 4, 6, 8 kg ha^?1). The foliar applied P with pre-plant performed better than without pre-plant and control treatments. Foliar treatment of phosphorus at 6 kg ha^?1 P proved to be the best among other foliar treatments followed by 8 kg ha^?1 P. The foliar application of phosphorous at 6 kg hac.^?1 with pre-plant soil applied P increased the shoot length, root length, shoot fresh weight, root fresh weight, shoot dry weight and root dry weight. The chlorophyll contents (Chl. a and b) were increased with the foliar application of phosphorous. The gas exchange parameters (net carbon dioxide (CO₂) assimilation rate, transpiration rate, stomatal conductance and sub-stomatal CO₂ rate) were significantly improved by foliar applied P. The maximum values of net CO₂ assimilation rate (5.27 μ mol m^?2 sec.^?1), transpiration rate (3.44 μ mol m^?2 sec.^?1), stomatal conductance (0.81 μ mol m^?2 sec.^?1) and sub-stomatal CO₂ (271.67 μ mol m^?2 sec.^?1), were recorded in the treatment where P was foliar applied at 6 kg hac.^?1 with pre-plant soil applied Phosphorous. The foliar application of phosphorous with pre-plant soil applied P enhanced Phosphorous use efficiency (PUE) in both varieties. The maximum value of PUE (15.42%) was recorded in the treatment where foliar feeding of P was done at 6 kg hac.^?1 with pre-plant soil applied P in both genotypes.     

Agronomic biofortification of chickpea with zinc and iron through application of zinc and urea

ABSTRACT

Zinc (Zn) and iron (Fe) deficiency-related health problems in humans may be solved by improving their concentration in edible grains. The study, conducted in 2015–16 and 2016–17, investigated the effects of soil and foliar application of Zn and foliar application of urea on grain Zn and Fe accumulation of chickpea grains. Soil application of ZnSO₄ @ 25 kg ha^?1 + foliar spray of ZnSO₄ @ 0.5% at flowering and pod formation stages resulted in the highest Zn (45.06 & 44.69 mg Zn kg^?1 grain in the first and second year of study) and Fe (59.74 & 62.88 mg Fe kg^?1 grain) content. Urea application @ 2% at flowering and pod formation stages also resulted in the highest grain Zn (41.12 & 40.26 mg Zn kg^?1 grain) and Fe (58.95 & 61.95 mg Fe kg^?1 grain) content. Grain yield and protein content were significantly increased over control with these treatments. As compared to the sole application of Zn, the combined use of Zn and urea improved the grain Zn and Fe contents. Zinc and urea can be applied to improve Zn and Fe content in chickpea grains and, therefore, can help in ameliorating malnutrition in burgeoning human population.     

Determination of Optimum Rate and Growth Stage for Foliar‐Applied Phosphorus in Corn

Abstract

Foliar applications of fertilizer phosphorus (P) could improve use efficiency by minimizing soil applications. Nine experiments were conducted in 2002 and 2003 to determine foliar P rates and appropriate growth stages for application. Treatments comprised of 10 factorial combinations of three foliar P application timings and four rates of foliar P. Foliar application times were V4 (collar of fourth leaf visible), V8 (collar of eighth leaf visible), and VT (last branch of the tassel completely visible but silks not yet emerged) corn growth stages. Foliar P rates were 0, 2, 4, and 8 kg ha^?1. Foliar P applied at the VT growth stage improved grain and forage P concentration, which was reflected in increased grain yield in some of the experiments. A foliar P rate of 8 kg ha^?1 improved yield to some extent and forage and grain P concentration more than the smaller rates. The results suggest that foliar P could be used as an efficient P‐management tool in corn when applied at the appropriate growth stage and rate.     

PHYTOTOXIC EFFECTS OF CADMIUM EXPOSURE AND METAL ACCUMULATION IN SUNFLOWER

The phytotoxicity imposed by cadmium (Cd) in sunflower was investigated on biomass, Cd accumulation, superoxide and lipid peroxidation product as well as the activities of superoxide dismutase, catalase and peroxidase. Plants accumulate substantial amount of Cd in different parts, the maximum being in roots, i.e., up to 820 μg g^?1 dry matter. Cadmium induced oxidative stress, indicated by increase in lipid peroxidation and superoxide content with increase in metal supply. Under Cd stress, the activities of superoxide dismutase and catalase declined to a greater extent in roots than in leaves. Even though the peroxidase activity increased in leaves, a decreasing trend was observed in root due to Cd stress. The threshold of toxicity (10% growth reduction) and toxicity (33% growth reduction) values of Cd in sunflower were 14 and 72 μg g^?1 in leaves, 19 and 90 μg g^?1 in stem and 65 and 250 μg g^?1 Cd in roots, respectively.     

Foliar K application to rainfed wheat in a soil testing high K as an option to improve K use efficiency,grain yield and yield components

Abstract

Granular application of potassium (K) in soils testing high is generally not recommended. However, the effect of foliar K on rainfed wheat (Triticum aestivum L.) under these soil conditions is largely unknown. The objective of this work was to identify the effect of K fertilizer on K use efficiency (KUE), grain yield and yield components of wheat. The data were collected until 2017 in an ongoing trial established in 2007 with eight treatments; two granular K rates (0 and 50?kg K ha^?1); two foliar N rates (0 and 3?kg N ha^?1); and two foliar K rates (0 and 3?kg K ha^?1) in a split-split plot arrangement. Treatments were applied to the same plots each season. Treatment with foliar K resulted in the highest KUE response but the effect size varied according to the accumulated precipitation during the reproductive stage. On average, KUE was enhanced in crop seasons with water constrains (<179?mm) during the growth period but the converse was true as the amount of precipitation increased. In contrast, granular K had no effect on KUE irrespective of precipitation conditions. Application of foliar K increased grain yield as compared to granular K from 2988 to 3089?kg ha^?1. This enhancement was attributed to an increased number of grains per head. Therefore, foliar K application to wheat is suitable in a soil testing high K to enhance KUE and grain yield, overall in crop seasons with water constrains.     

Assessment of ZN Interaction with Nutrient Cations in Alkaline Soil and its Effect on Plant Growth

An experiment was conducted to assess the zinc (Zn) availability to wheat in alkaline soils during Rabi 2009–2010. Wheat seedlings in pots having 2 kg alkaline sandy soil per pot were treated with 5, 10 and 15 kg Zn ha^?1 as soil and with 0.5 and 1.0% zinc sulfate (ZnSO₄) as foliar application. Results showed that Zn increasing levels in soil helped in phosphorus uptake up to boot stage but its conversion to grain portion lacked in Zn treated plants. Potassium (K) uptake also increased up to 6.24% in boot stage with treatment of 10 kg Zn ha^?1 + 1.0% ZnSO₄ foliar spray. Zinc (Zn) concentration increased in plant tissues with the increasing level of Zn application but this disturbed the phosphorus (P)-Zn interaction and, thus, both of the nutrients were found in lesser quantities in grains compared to the control. Despite of the apparent sufficient Zn level in soil (1.95 mg kg^?1), improvement in growth and yield parameters with Zn application indicate that the soil was Zn deplete in terms of plant available Zn. The above findings suggest that the figure Zn sufficiency in alkaline soil (1.0 mg kg^?1) should be revised in accordance to the nature and type of soils. Furthermore, foliar application of Zn up to 1.0% progressively increased yield but not significantly; and it was recommended that higher concentrations might be used to confirm foliar application of Zn as a successful strategy for increasing plant zinc levels.     

DETERMINING THE ZINC REQUIREMENT OF ONION BY SEED ANALYSIS

Our study analyzed the effect of foliar tissues and seed tissue for determining the micronutrient status of a crop. Zinc (Zn) requirements of onion (Allium cepa L.) leaves and seeds were estimated from yield response curves based on field experiment conducted on a Zn-deficient calcareous soil. Three onion cultivars, i.e., ‘Swat-1’, ‘Phulkara’, and ‘Sariab Red’ were grown by applying 0, 2, 4, 8, and 16 kg Zn ha^?1. Zinc application significantly increased seed yield of all the three cultivars of onion. The order of seed yield response to Zn fertilization was: ‘Swat-1’ < ‘Phulkara’ < ‘Sariab Red’. Fertilizer Zn requirement for near-maximum seed yield was 2 kg Zn ha^?1. Zinc concentration in mature onion seed also appeared to be a good indicator of soil Zn availability status. Critical Zn concentration in seed was 18 mg Zn kg^?1, and in matured leaves was 21 mg kg^?1.     

Mechanisms of exogenous nitric oxide and 24-epibrassinolide alleviating chlorosis of peanut plants under iron deficiency

Iron(Fe) is a crucial transition metal for all living organisms including plants; however, Fe deficiency frequently occurs in plant because only a small portion of Fe is bioavailable in soil in recent years. To cope with Fe deficiency, plants have evolved a wide range of adaptive responses from changes in morphology to altered physiology. To understand the role of nitric oxide(NO) and 24-epibrassinolide(EBR) in alleviating chlorosis induced by Fe deficiency in peanut(Arachis hypogaea L.) plants, we determined the concentration of chlorophylls, the activation, uptake, and translocation of Fe, the activities of key enzymes, such as ferric-chelate reductase(FCR),proton-translocating adenosine triphosphatase(H~+-ATPase), and antioxidant enzymes, and the accumulation of reactive oxygen species(ROS) and malondialdehyde(MDA) of peanut plants under Fe sufficiency(100 μmol L~(-1)ethylenediaminetetraacetic acid(EDTA)-Fe) and Fe deficiency(0 μmol L~(-1)EDTA-Fe). We also investigated the production of NO in peanut plants subjected to Fe deficiency with foliar application of sodium nitroprusside(SNP), a donor of NO, and/or EBR. The results showed that Fe deficiency resulted in severe chlorosis and oxidative stress, significantly decreased the concentration of chlorophylls and active Fe, and significantly increased NO production. Foliar application of NO and/or EBR increased the activity of antioxidant enzymes, superoxide dismutase,peroxidase, and catalase, and decreased the ROS and MDA concentrations, thus enhancing the resistance of plants to oxidative stress.Application of NO also significantly increased Fe translocation from the roots to the shoots and enhanced the transfer of Fe from the cell wall fraction to the cell organelle and soluble fractions. Consequently, the concentrations of available Fe and chlorophylls in the leaves were elevated. Furthermore, the activities of H~+-ATPase and FCR were enhanced in the Fe-deficient plants. Simultaneously,there was a significant increase in NO production, especially in the plants that received NO, regardless of Fe supply. These suggest that NO or EBR, and, especially, their combination are effective in alleviating plant chlorosis induced by Fe deficiency.     

Possibilities of using sewage sludge as nitrogen fertilizer for maize

Abstract

The objective of this study was to determine the effects of nitrogen fertilizer sources of ammonium sulphate and municipal sewage sludge on yield, N content and uptake of the maize (Zea mays L.). Nutrient and heavy metals were determined in soil and plant. The experiment with three sludge rates (256, 513 and 1026 kg total N ha^?1 or 9.5, 18.0 and 38.1 t ha^?1 sludge), two nitrogen rates (80 and 160 kg N ha^?1) and zero-N control were conducted on a clay loam soils under irrigated conditions in Eastern Anatolia region in Turkey. Treatments were arranged in a randomized complete block design with four replications. Yield, N content and total N uptake of maize increased significantly with sludge application. 9.5 t and 19.0 t ha^?1 sewage sludge applications did not significantly affect heavy metal content of leaf and grain. However, 38.1 t ha^?1 sludge applications increased leaf Pb and Zn. DTPA-extractable Cd, Cu, Fe, Pb and Zn concentrations of the soil increased at applications of 38.1 t ha^?1 sewage sludge, whereas applications of 9.5 t and 19.0 t ha^?1 sludge only resulted in elevated levels of Cu and Zn, We conclude that if sewage sludge is to be used in production of maize, applications rate up to 19 t ha^?1 could be accepted. However, this means also that the N requirement of maize crop is not covered by the sludge; therefore, the rest of nitrogen could be supplied as inorganic N.     

Agronomic evaluation of mulching and iron nutrition on productivity,nutrient uptake,iron use efficiency and economics of aerobic rice-wheat cropping system

Field experiments were carried out during rainy (kharif) and winter (rabi) seasons (June–April) of 2008–2010 at Indian Agricultural Research Institute (IARI), New Delhi, to study the productivity, nutrients uptake, iron (Fe) use-efficiency and economics of aerobic rice-wheat cropping system as influenced by mulching and Fe nutrition. The highest yield attributes, grain and straw yields (5.41 tonnes ha^?1 and 6.56 tonnes ha^?1, respectively) and nutrient uptake in rice was recorded with transplanted and puddled rice (TPR) followed by aerobic rice with Sesbania aculeata mulch. However, residual effect of aerobic rice with wheat straw mulch was more pronounced on yield attributes, grain and straw yields (4.20 and 6.70 tonnes ha^?1, respectively) and nutrient uptake in succeeding wheat and remained at par with aerobic rice with Sesbania mulch. Application of iron sulfate (FeSO₄) at 50 kg ha^?1 + 2 foliar sprays of 2% FeSO₄ was found to be the best in terms of all the yield attributes, grain and straw yield (5.09 and 6.17 tonnes ha^?1, respectively) and nutrient uptake and remained at par with 3 foliar sprays of 2% FeSO₄. Although residual effect of iron application failed to increase the yield attributes, yield and nutrient uptake nitrogen, phosphorus and potassium (N, P, K) except Fe. The highest system productivity, nutrient uptake, gross returns, net returns, B: C ratio and lowest cost of cultivation were recorded with aerobic rice with wheat straw and Sesbania aculeata mulch. Application of FeSO₄ at 50 kg ha^?1 + two foliar sprays of 2% FeSO₄ was found better in respect of system productivity, nutrient uptake, gross returns, net returns, B:C ratio and cost of cultivation in aerobic rice-wheat cropping system. The Fe use efficiency values viz. partial factor productivity (kg grain kg^?1 Fe), agronomic efficiency (kg grain increased kg^?1 Fe applied), agrophysiological efficiency (kg grain kg^?1 Fe uptake), physiological efficiency (kg biomass kg^?1 Fe uptake), apparent recovery (%) utilization efficiency and harvest index (%) of applied Fe were significantly affected due to methods of rice production and various Fe nutrition treatments in aerobic rice and aerobic rice-wheat cropping system.