Indirect determination of micrograms of sulfate by barium absorption spectroscopy

Abstract

The indirect procedure for sulfate determination by Ba absorption spectroscopy was modified so that low concentrations of SO₄ in small volumes of solutions could be determined rapidly and precisely. Major modifications consisted of seeding the sample with BaSO₄, precipitating in ethanol solutions to lower BaSO₄ solubility, and determining Ba in a N₂O‐acetylene flame using the absorption mode.

The results showed: complete SO₄ precipitation as BaSO₄ after 15 min of shaking, little or no effect from solution Al on SO₄ determination, quantitative recovery of SO₄ from 0.01 M Ca(H₂PO₄)₂ soil extracts, and greater precision of SO₄ measurement with indirect method than with turbidimetric method.     

Extraction of phosphorus,potassium, calcium,and magnesium from soils by an ion‐exchange resin procedure

Abstract

A procedure for the simultaneous extraction of phosphorus, potassium, calcium and magnesium from soils, by an ion‐exchange resin procedure applicable to large‐scale advisory soil testing, is described. The important steps are the disaggregation of soil by shaking in water during 15 minutes with a glass marble, the transference of the elements from the soil to a sodium bicarbonate treated mixture of anion and cation exchange resins during a 16‐hour shaking period, the separation of the resin from the soil by sieving and extraction of the elements from the resin.

The results of resin extractable calcium, magnesium and potassium were comparable to the results of these elements extracted with 1M NH₄OAc, to calcium and magnesium extracted with 1M KCl, and to potassium extracted with 0.025M H₂SO₄.

For phosphorus the resin extractable values were not comparable to the results obtained by the former routine method, based on the extraction with 0.025M H₂SO₄. The results of resin extractable P presented closer correlation with cotton response to phosphorus application in 28 field experiments (r = 0.85**) as compared with 0.025M H₂SO₄ extractable P (r = 0.68**), and also with P uptake by flooded rice in a pot experiment with eight lowland soil samples (r = 0.98**), as compared with extraction with 0.0125M H₂SO₄ in 0.050M HCl, for which the correlation was not significant. The reasons for the superiority of the extraction of P with the described procedure are discussed.     

Availability and extractability of soil manganese in a liming experiment

Abstract

The availability of soil Mn to corn in relation to extractability of soil Mn by EDTA, Mg(NO₃)₂, CH₃COONH₄, hydroquinone, H₃PO₄, and NH₄H₂PO₄ as affected by liming was evaluated under field conditions on a single soil type. EDTA, Mg(NO₃)₂ and CH₃COONH₄‐extractable Mn were related inversely to available Mn. No useful relationships were found between hydroquinone, H₃PO₄, and NH₄H₂PO₄‐extractable soil Mn and Mn uptake by sweet corn.     

Organic matter availability for denitrification in soils of different textures and drainage classes

Abstract

Soils from the A, B, and C horizons representing three natural drainage classes and differing textures were chosen to study relationships between denitrification rate and estimates of available carbon. The highest correlation with denitrification rate was obtained with total organic C. Water‐extractable C, mineralizable C and 0.1 N Ba(OH)2‐extractable C produced less satisfactory correlations. When soils of the B and C horizons only were included in the regression analysis, 0.1 N Ba(OH)₂‐extractable C was found to be unsatisfactory as a predictor of available C for soil denitrifiers. None of the four methods for estimating available C were found adequate for B and C horizon soils which were relatively low in available C. Coarser‐textured soils with relatively low C levels had correspondingly low denitrification rates. Regressions of denitrification rate on mineralizable C or water‐extractable C were nonsignificant with poorly drained soils whereas they were highly significant with well or imperfectly drained soils.     

A turbidimetric method for determining phosphate‐extractable sulfates in tropical soils

Abstract

Turbidimetric methods, using Ba ions to precipitate SO₄, are frequently used to determine soil sulfates extracted with phosphate solutions. These methods, as routinely performed, seriously underestimate SO₄ in some soils of the tropics because phosphate is removed from the extractant by soil adsorption and because many extracts fail to yield satisfactory precipitate even if the extracting procedure is adequate. Decolorizing the extracts with carbon black, treating extracts with strong oxidizing agents, adding SO₄ spikes, and seeding the extracts with BaCl₂ seed‐crystals improve precision, but some extracts, especially those from soils derived from volcanic ash, do not yield reliable precipitates even though these procedures are employed. This paper presents a method that consistanlty yielded more SO₄ than other turbidimetric procedures with which it was compared. The proposed method was further validated against an ion‐chromatographic method for SO₄ determination. The two methods yielded virtually identical results.

The proposed method consists of extracting SO₄ with 0.04 M Ca(H₂PO₄)₂ pH 4, at a soil‐to‐solution ratio of 1: 10. Repeated extraction is necessary for phosphate‐retentive soils. (A. single extraction was approximately 40% effective for removing indigenous SO₄ from a Hydric Dystrandept subsoil, approximately 78% effective for an Eutrustox.) Organic materials are removed from the extracts by adsorption on charcoal; SO₄ is concentrated in the extract by volume reduction; a SO₄ spike is added; BaCl₂‐seed crystal is added, after which volume is increased by adding BaCl₂ solution. Optical density is read at 600 nm.     

Fractionation and distribution of selenium in soils

Abstract

A modified selenium (Se) fractionation procedure was used to study Se distribution in three soils (two silt loams and one silty clay). This sequential procedure consisted of: i) 0.2 M potassium sulfate (K₂SO₄)‐soluble fraction, ii) 0.1 M potassium dihydrogen phosphate (KH₂PO₄)‐exchangeable fraction, iii) 0.5 M ammonium hydroxide (NH₃H₂O)‐soluble fraction, iv) 6 M hydrochloric acid (HCl)‐extractable fraction, and v) residual fraction digested with perchloric (HClO₄) and sulfuric (H₂SO₄) acids. The fractionation procedure had high recovery rates (92.5 to 106%). The Se distribution in soil was controlled by soil properties, such as pH, oxide, clay, and calcium carbonate (CaCO₃) contents. In the untreated soil samples, residual Se fraction was dominant. In the Se‐enriched soils, the silty clay had significantly more Se in the NH₃H₂O and residual fractions while in the two silt loams the largest were KH₂PO₄ and residual fractions. The Se availability in the two silt loams was higher than in the silty clay. The Se availability pattern in the untreated soils was: unavailable (HCl + residual fractions) >> potentially available (KH₂PO₄ + NH₃H₂O fractions) > available (K₂SO₄ fraction), while in the Se‐enriched soils it was potentially available > unavailable > available.     

Influence of air drying and soil gas‐phase carbon dioxide on DTPA‐extractable iron in calcareous soils

Abstract

The extraction of a field‐moist soil with DTPA will result in a level of extractable iron (Fe) lower than that of the air‐dried soil. Soil gas‐phase carbon dioxide (CO₂) levels may be considerably higher than ambient atmospheric levels, especially in wet soils in the field. This study was undertaken to determine whether gas‐phase CO₂ level influences the quantity of Fe extracted by DTPA. Three moist calcareous soils were incubated for 21 days, each at three different partial pressures of CO₂, after which the moist soils were extracted with DTPA. A sample of each soil was also air dried, and was subsequently extracted with DTPA. In each case, DTPA‐extractable Fe from the moist sample was lower than that from the air‐dried sample; however, DTPA‐extractable Fe increased with increasing CO₂ partial pressure of in the moist soils. DTPA‐extractable Fe concentration for a given soil following air drying was not significantly influenced by the CO₂ partial pressure during incubation of the originally field‐moist soil. DTPA‐extract pH of the moist soils followed the same trend as soil‐solution pH (i.e., as CO₂ concentration of the soil gas‐phase increased, soil solution pH and DTPA extract pH both decreased); however, the slope of the pH versus log P_CO2 curve was less pronounced in the DTPA extract due to the buffering capacity of the triethanolamine. From this study, it is concluded that elevated soil gas‐phase CO₂ partial pressure does not contribute to the lower level of DTPA‐extractable Fe observed when the extraction is performed on a field‐moist versus an air‐dried soil; increased CO₂ partial pressure actually resulted in a slight increase in concentration of DTPA‐extractable Fe obtained from a field‐moist soil.     

Characterization of sulfur retained by soils exposed to sulfur dioxide

Abstract

Soils have substantial capacity for sorption of sulfur dioxide (SO₂) but little is known about the nature of the sorbed S. Three surface soils varying in pH, organic matter, CaCO₃ equivalent and surface area were exposed to air containing 5% SO₂ and subsequently analyzed by ten different procedures to characterize the sorbed S. Most of the sulfur retained by soils after exposure to SO₂ could be recovered as CaCl₂‐extractable S, Ca(H₂PO₄)₂‐extractable S, or S released as H₂S by hydriodic acid (HI). Only small amounts of sulfur could be recovered as tetrachloromercurate (TCM)‐extractable S, S released as SO₂ by HCl, or S released as H₂S by HCl + Zn, HCl + Sn, or Raney Ni and NaOH. However, large amounts of S released as SO₂ by HCl were recovered from the air‐dry Webster and the moist Storden soils indicating that SO₂ sorption is influenced by organic matter in air‐dry soils and by CaCO₃ in moist soils.     

Chemical fractionation,water solubility and temporal distribution of sheep faecal sulphur fractions in grazed pastures receiving long‐term sulphate fertilization

Abstract

Although over 40% of excretal S is returned to intensively sheep ‐grazed pastures as faecal S, limited information is available on faecal S fractions, their water solubility and temporal distribution. This study reports results obtained from sheep faeces returned to grazed pastures which have received long‐term annual sulphate applications for 15–20 years. Five freshly‐voided sheep faecal samples (<100 g moist faeces per sample) per sampling were randomly collected at approximately one month intervals over a one‐year growing season. Faeces were fractionated into total S, inorganic SO₄ ^2‐, ester SO₄ ^2‐, Hi‐reducible S and C‐bonded S. Results obtained showed that faecal total S, ester SO₄ ^2‐ Hi‐reducible S and C‐bonded S fractions varied significantly throughout the year. Carbon‐bonded S was the dominant (>80%) faecal S fraction, regardless of faecal total S content or the time of year faecal samples were deposited. Faecal ester SO₄ ^2‐ and inorganic _SO₄ ^2‐fractions accounted for 3.3–7.1% and 0.1–14% of faecal total S respectively. Thus approximately 3.4–21.1% of faecal total S was estimated to be potentially leached or readily available to pasture plants. The Hi‐reducible faecal S fraction was significantly‐correlated (r = 0.59***; *** = P ≤ 0.001) with HCl‐extractable faecal inorganic S, which was considered to represent faecal total SO₄ ^2‐ (ester SO₄ ^2‐ and inorganic SO₄ ^2‐ fractions).

The solubility of different faecal S fractions was determined by sequential extraction of ground (< 1 mm) faeces three times (30 minutes per extraction) with water or 0.01 M Ca(H₂PO₄)₂ solution (1: 5 ratio of faecal DM: extractant). Both amounts of water‐extractable and Ca(H₂PO₄)‐extractable faecal S fractions were found to vary significantly throughout the year. Ca(H₂PO₄)₂ tended to extract more inorganic faecal S than water, attributed to the presence of phosphate and the low pH (pH=4) of Ca(H₂PO₄)₂ extractant. A significant proportion (15–25%) of faecal S was extracted by water and most (70%) of this water‐extractable faecal S was in the organic S fraction. Water‐extractable inorganic faecal S probably originated from the faecal total SO₄ ^2‐ fraction as shown by their significant correlation (r = 0.45** ‐0.63***; ** = P≤ 0.01; *** = P≤ 0.001). Some of the faecal S in water extracts may also originate from the faecal C‐bonded S fraction, as a significant correlation was obtained between C‐bonded faecal S and either water‐extractable faecal organic S (r = 0.53–0.57***; *** = P ≤ 0.001) or water‐extractable faecal inorganic S (r = 0.40–0.41*; * = P ≤ 0.05).

Significant amounts of faecal inorganic SO₄ ^2‐ and ester SO₄ ^2‐ fractions were removed by Ca(H₂PO₄)₂ extractant. The Ca(H₂PO₄)₂‐extractable faecal inorganic S was significantly correlated (r = 0.73***^; *** = P ≤ 0.001) with water‐extractable faecal inorganic S.     

Applied Mn extracted by four methods correlated with Mn concentrations in soybean leaf tissue on a southeastern soil

Abstract

Four extractants for soil Mn were compared for their sensitivity to changes in Mn availability caused by rates and sources of added soil Mn and soil pH variations. Their ability to extract amounts of Mn correlated with plant Mn concentrations was also determined. Two field experiments were conducted on a sandy, high water table soil (Ultic Haplaquod‐Arenic Plinthaquic Paleudult) which included 5 Mn rates, 4 Mn sources and 3 soil pH levels. Soybeans [Glycine max (L.) Merr. cultivar Ransom] were grown and leaf tissue and soils sampled at the late pod‐fill stage. All four extractants separated the high‐ Mn rates, but the small exchange method did not separate the low Mn rates. Few differences were observed among extractants due to Ma sources. The DTPA method was the only procedure to correctly distinguish soil pH levels by showing decreasing extractable Ma with increasing soil pH. Including pH in multiple regressions significantly increased the plant Mn‐soil Mn correlation coefficients. The DTPA method and the 0.1N H₃PO₄ method had the highest correlation coefficients and the double acid method the lowest. The small exchange method was intermediate. Considering all the results, the DTPA was the most promising method for extracting Mn from this sandy, southern Coastal Plain soil.     

Estimation of plant available manganese in acidic subsoil horizons

Abstract

General agreement does not exist as to the most appropriate method to estimate plant available Mn in soils. In the current investigation soil and soil solution Mn were measured in limed and unlimed treatments of 11 acidic subsoil horizons and related to plant Mn concentrations, Mn uptake and growth of subterranean clover (Trifolium subterraneum L. cv. Mt. Barker) and switchgrass (Panicum virgatum cv. Cave‐in‐Rock). Manganese measurements were taken at planting and harvest and included: Mn extracted by 1M NH₄OAc (pH 7), 0.01M CaCl₂, 0.05M CaCl₂, 0.033M H₃PO₄, 0.005M DTPA, 0.2% hydroquinone in 1M NH₄OAc (pH 7), 0.01M NH₂ OH.HCl 4 2 in 0.01M HNO₃, total soil solution Mn and concentrations and 2+ activities of Mn²⁺ calculated from the GEOCHEM program. Measured and calculated values of soil solution Mn generally gave the best correlations with subterranean clover and switchgrass Mn concentrations and Mn uptake. Root Mn concentrations were highly correlated with soil solution Mn measurements taken at harvest with r=0.97 and r=0.95 (p<0.01) for subterranean clover and switchgrass respectively. The Mn extracted by 0.01M CaCl was also significantly correlated (p<0.01) with plant Mn concentrations and Mn uptake and proved to be better than the other extractants in estimating plant available Mn. Although Mn concentrations as high as 1769 mg/kg (shoots) and 8489 rag/kg (roots) were found in subterranean clover, Mn did not appear to be the major factor limiting growth. Measures of soil and soil solution Mn were not strongly correlated with yield. Both Al toxicities and Ca deficiencies seemed to be more important than Mn toxicities in limiting growth of subterranean clover and switchgrass in these horizons.     

Evaluation of calcium dihydrogen phosphate solution as an extractant for inorganic sulfate applied to soils

Abstract

To evaluate conventional calcium dihydrogen phospahte [Ca(H₂PO₄)₂] solution containing 500 mg P/L as an extractant for soluble plus adsorbed sulfate (SO₄), we added known amounts of SO₄ to 10 soil samples differed in clay mineral composition and extracted with Ca(H₂PO₄)₂ solution. The experimental results showed that the five successive extractions at a soihsolution ratio of 1:10 could quantitatively recover the added SO₄, and there was little effect of air‐drying the soils after addition of SO₄. Based upon these experimental results, we concluded that the Ca(H₂PO₄)₂ extraction is an excellent method for determining soluble plus adsorbed inorganic SO₄ in soils.     

Evaluation of soil sulfate extractants and methods of analysis for plant available sulfur

Abstract

A steady decline in sulfur additions to Atlantic Canadian soils has prompted the need for an accurate method of determining their plant available sulfur status. Three soils were extracted with five soil extractants ‐ 0.01M Ca(H2PO₄)₂‐H₂O in 2M HOAc, 0.1M CaCl₂, Bray‐1 and de‐ionized water. The soil extracts were analyzed for sulfur or sulfate using inductively coupled argon plasma emission spectrometry (ICAP), AutoAnalyzer (AAN), anion exchange‐high performance liquid chromatography (HPLC‐CD) or atomic absorption spectroscopy (AAS). Results were compared with plant response of sulfur treatments to red clover, ryegrass, canola and wheat in a growth room. Instrument reproducibility and crop response indicated the ideal method of determining plant available soil sulfur was HPLC‐CD using the extractant Ca(H2PO₄)₂‐H₂O.     

Extraction of soil‐available phosphate,nitrate, and sulphate ions using ion exchange membranes and determination by ion exchange chromatography

Abstract

In recent years, ion exchange membranes (IEM) have been used successfully to determine the availability of soil nutrient elements for plants. In general, the procedures proposed are applied to the determination of a single ion, and in only a few of these studies, the selectivity of these IEM was considered. Therefore, this work was conducted (a) to find the most suitable extraction conditions for phosphate (H₂PO₄ ^‐), nitrate (NO₃ ^‐), and sulfate (SO₄ ^2‐) in soils by IEM and their subsequent determination by ion chromatography, (b) to test the effectiveness and selectivity of IEM, (c) to compare the results obtained by IEM with the common procedure for determining the availability of the soil nutrient elements, and (d) to verify whether a relation exits between the concentration of phosphorus (P) extracted by IEM and the plant P requirement. The soil samples used for this study were Humic Cambisols located in four forest plots under natural conditions and four plots fertilized with 100 kg P ha^‐1 as triple superphosphate. The efficacy of the IEM was high (85% for SO₄ ^2‐, and 92% for H₂PO₄ ^‐ and NO₃ ^‐). Statistically significant correlations were obtained between the H₂PO₄ ^‐ extracted by IEM and the H₂PO₄ ^‐ obtained by the Bray P1 procedure (r²=0.936) and with the H₂PO₄ ^‐ extracted using Saunders and Williams (1955) procedure (r²=0.370). The correlation obtained between the amount of NO₃ ^‐ extracted with IEM and that obtained using 2M potassium chloride (KCl) was also highly significant (r²=0.828). The IEM extraction allowed to know in a single extraction process and a single subsequent measurement by ion chromatography the concentrations of soil available H₂PO₄ ^‐, NO₃ ^‐, and SO₄ ^2‐ ions, which are of great plant nutrition interest. Phosphorus extractable with IEM yielded a close relationship with biomass production and could be used for determining the P requirement of these forest trees.     

The profile distribution of total and extractable copper in selected Nigerian soils

Abstract

The profile distribution of total, DTPA‐ and 0.1N HCl‐extractable Cu was determined in 11 Nigerian soil profiles formed from various parent materials including the coastal plain sands, shales, basalt, granite and banded gneiss.

Total Cu ranged from 7 to 72 ppm with a mean of 35 ppm₀ The soils formed from basalt had the highest values while those on coastal plains had the least content. Generally, there was a higher content in the subsoils than in the surface horizons. The total Cu significantly correlated with percent clay and the free oxide contents of Fe and Mn.

DTPA ‐ and 0.1N HCl‐extractable Cu ranged from 0.08 to 2.81 ppm and 0.10 to 7.78 ppm, respectively. Soils on metamorphic rocks gave the highest values of DTPA‐extractable Cu. The DTPA‐extractable Cu ‐was only related to pH but the acid extractable Cu was associated with total Cu, clay, free Fe₂O₃ and MnO₂ contents.     

Short‐Term Effect of Lime,Phosphorus, and Iron Amendments on Water‐Extractable Lead and Arsenic in Orchard Soils

Abstract

Lead arsenate was extensively used to control insects in apple and plum orchards in the 1900s. Continuous use of lead arsenate resulted in elevated soil levels of lead (Pb) and arsenic (As). There are concerns that As and Pb will become solubilized upon a change in land use. In situ chemical stabilization practices, such as the use of phosphate‐phosphorus (P), have been investigated as a possible method for reducing the solubility, mobility, and potential toxicity of Pb and As in these soils. The objective of this study was to determine the effectiveness of calcium carbonate (lime), P, and iron (Fe) amendments in reducing the solubility of As and Pb in lead‐arsenate‐treated soils over time. Under controlled conditions, two orchard soils, Thurmont loam (Hapludults) and Burch loam (Haploxerolls), were amended with reagent‐grade calcium carbonate (CaCO₃), iron hydroxide [Fe(OH)₃], and potassium phosphate (KH₂PO₄) and incubated for 16 weeks at 26°C. The experimental results suggested that the inorganic P increased competitive sorption between H₂PO₄ ^? and dihydrogen arsenate (H₂AsO₄ ^?), resulting in greater desorption of As in both Thurmont and Burch soils. Therefore, addition of lime, potassium phosphate, and Fe to lead‐arsenate‐contaminated soils could increase the risk of loss of soluble As and Pb from surface soil and potentially increase these metal species in runoff and movement to groundwater.     

Effects of air-drying on the adsorption and desorption of phosphate and levels of extractable phosphate in a group of acid soils,New Zealand

The effects of air-drying field-moist soils on the adsorption and desorption of added phosphate and on the levels of extractable native soil phosphate were examined using the A and B horizons of a group of four acid soils.Air-drying increased the capacity of all the soil samples to adsorb phosphate. At an equilibrium solution concentration of 0.5 μg P ml^?1, the increase in the quantity of phosphate adsorbed following drying ranged from 23% to 70% of that adsorbed by the moist samples. Considerable hysteresis in phosphate adsorption—desorption isotherms was observed for both moist and dried soil samples indicating that the additional phosphate adsorbed by the dried samples was held with the same strength as that held by the moist samples.Air-drying the soil samples caused a small decrease in soil pH of approximately 0.1 pH unit and a general increase in levels of EDTA-extractable Fe, Al and organic matter. Quantities of native soil phosphate extractable with EDTA, resin and NaHCO₃ were also increased. Concentrations of oxalate- and pyrophosphate-extractable Fe and Al and exchangeable Al were, however, unaffected by drying.It was also shown that when the phosphate content of NaHCO₃ extracts is measured using the conventional molybdenum blue method, orthophosphate plus a differing amount of acid-hydrolysable organic P present in the extract is measured.     

在实验酸性硫酸盐条件和酸性硫酸盐土壤上可溶性铝的控制

The controls of soluble Al concentration were examined in three situations of acid sulfate conditions:1) experimental acid sulfate conditions by addition of varying amounts of Al(OH)3(gibbsite) into a sequence of H2SO4 solutions;2)experimental acid sulfate conditions by addition of the same sequence of H2SO4 solutions into two non-cid sulfacte soil samples with known amounts of acid oxalate extractable Al; and 3) actual acid sulfate soil conditions.The experiment using gibbsite as an Al-bearing mineral showed that increase in the concentration of H2SO4 solution increased the soluble Al concentration,accompanied by a decrease i the solution pH, Increasing amount of gibbsite added to the H2SO4 solutions also increased soluble Al concentration,but resulted in an increase in solution pH.Within the H2SO4 concentration range of 0.0005-0.5mol L^-1 and the Al(OH)3 range of 0.01-0.5g(in 25 mL of H2SO4 solutions),the input of H2SO4 had the major control on soluble Al Concentration and pH .The availability of Al(OH)3，however,was responsible for the spread fo the various sample points,with a tendency that the samples containing more gibbsite had a higher soluble Al concentration than those containing less gibbsite at equivalent pH levels.The experimental results from treatment of soil samples with H2SO4 solutions and the analytical results of acid sulfate soils also showed the similar trend.     

Cations adsorbed to soil organic matter — A regulatory factor for the release of organic carbon and hydrogen ions from soils to waters

Surface waters in northern forest ecosystems receive a substantial amount of drainage water from superficial soil horizons enriched in organic matter (SOM). Chemical reactions in the interface between the soil solution andf organic colloides will therefore affect the surface water chemistry. The mobilization of total organic carbon (TOC) and pH was studied as a function of amounts of organically adsorbed Na, Ca and Al in two O and one A horizon, which differed in the likelihood of contributing to the chemistry in runoff, in a forested watershed in northern Sweden. The samples were hydrogen ion saturated, washed and titrated with NaOH, Ca(OH)₂ and Al(OH)₃ in a constant ionic medium of 0.01 M NaCl in order to give rise to a population of manipulated samples differing in the composition of adsorbed cations. The highly humified SOM accumulated in the O_h and A_h horizons of a Gleysol close to the draining stream was stabilized by flocculating Al (95% of adsorbed metal cations), which resulted in a low release of TOC. These horizons showed a high potential of organic carbon solubility when Al was changed for di- or monovalent cations. Calculations suggested that the release of TOC would increase more than ten times if Al was exchanged for Ca upon liming to pH 6.0. The pH values of all horizons were shown to be determined mainly by the composition of adsorbed mono-,di- and trivalent cations.     

Sorption of phosphorus by some surface soils from Quebec in relation to their properties

Abstract

Surface horizons from Podzolic and Gleysolic soils were collected in various parts of the province of Quebec, Canada, and equilibrated with various amounts of KH₂PO₄ in 0.01 M CaCl₂ for 48 hours. P sorption data conformed to the linear form of the Langmuir and Freundlich equations. P solubility isotherms showed evidence of hydroxyapatite formation in most samples studied, whereas equilibration solutions of only few samples were saturated with respect to either dicalcium phoshate dihydrate or octocalcium phosphate. These reaction products were associated to soil pH and levels of added phosphate. The average values of the Langmuir sorption maximum for these studied Gleysolic and Podzolic samples were 763 and 1096 μg/g respectively. These values were higher than those obtained by the segmented and modified Freundlich models.

Relationships between the soil characteristics and P sorption parameters were evaluated by regression analysis. Among all variables, oxalate‐extractable Fe plus Al content of the Podzolic samples and the ratio of oxalate—extractable Al to clay of the Gleysolic samples gave the best significant correlation coefficients. Furthermore, soil pH and various ratios such as pyrophosphate‐extractable Fe and Al, oxalate‐extractable Fe and organic matter to clay were found to be significantly correlated only with the P sorption parameters of the Gleysolic samples.