Comparison of hydroponic and aeroponic cultivation systems for the production of potato minitubers

Summary Two different cultivation systems, aeroponics and hydroponics in greenhouse beds, were compared for the production of potato minitubers. Plants in the aeroponic system showed increased vegetative growth, delayed tuber formation and an extended vegetative cycle of about seven months after transplanting. Therefore in 1999, two production cycles were obtained with the hydroponic system, but only one with the aeroponic system. However, compared with total production in hydroponics, the tuber yield per plant in the aeroponic system was almost 70% higher and tuber number more than 2.5 fold higher. Average tuber weight was reduced by 33% in the aeroponic system. Advantages and possible problems with the aeroponic system for minituber production are discussed.     

Growth and Tuberization of Hydroponically Grown Potatoes

Three hydroponic systems (aeroponics, aerohydroponics, and deep-water culture) were compared for the production of potato (Solanum tuberosum) seed tubers. Aerohydroponics was designed to improve the root zone environment of aeroponics by maintaining root contact with nutrient solution in the lower part of the beds, while intermittently spraying roots in the upper part. Root vitality, shoot fresh and dry weight, and total leaf area were significantly highest when cv. Superior, a medium early-maturing cultivar, was grown in the aeroponic system. This better plant growth in the aeroponic system was accompanied by rapid changes of solution pH and EC, and early tuberization. However, with cv. Atlantic, a mid-late maturing cultivar, there were no significant differences in shoot weight and leaf area among the hydroponic systems. The first tuberization was observed in aeroponics on 26–30 and 43–53 days after transplanting for cvs Superior and Atlantic, respectively. Tuberization in aerohydroponics and deep-water culture system occurred about 3–4 and 6–8 days later, respectively. The number of tubers produced was greatest in the deep-water culture system, but the total tuber weight per plant was the least in this system. For cv. Atlantic, the number of tubers <30 g weight was higher in aerohydroponics than in aeroponics, whereas there was no difference in the number of tubers >30 g between aerohydroponics and aeroponics. For cv. Superior, there was no difference in the size distribution of tubers between the two aeroponic systems. It could be concluded that deep-water culture system could be used to produce many small tubers (1–5 g) for plant propagation. However, the reduced number of large tubers above 5 g weight in the deep-water culture system, may favor use of either aeroponics or aerohydroponics. These two systems produced a similar number of tubers in each size group for the medium-early season cv. Superior, whereas aerohydroponics produced more tubers than aeroponics for the mid-late cultivar Atlantic.     

Economic Optimum Nitrogen Fertilization Rates and Nitrogen Fertilization Rate Effects on Tuber Characteristics of Potato Cultivars

The objective of the research was to determine the economic optimum nitrogen (N) fertilization rates and to determine the effects of N fertilization rates on tuber characteristics and fresh mass loss after storage under cold and ambient conditions of four potato cultivars, Ágata, Asterix, Atlantic, and Monalisa. The experiments were, simultaneously, conducted in the same area and similar experimental conditions during the fall/winter period in Viçosa, Minas Gerais State, Brazil. In each experiment, five N fertilization rates (0, 50, 100, 200, 300 kg ha^?1) were evaluated in a randomized complete block design. For all cultivars, increasing N fertilization rate increased total and marketable yields and tuber dry matter yield up to a maximum following a quadratic model. Increasing N fertilization rate linearly increased the tuber protein concentration of Atlantic and Monalisa and had no effect on tuber pH. N fertilization rate effects on tuber mass, tuber titratable acidity, and fresh mass loss during storage were cultivar-dependent. N use efficiency (tuber yield divided by N fertilization rate) decreased with increase in N fertilization rate. The economic optimum N fertilization rates ranged from 147 to 201 kg ha^?1 depending upon cultivar and relative prices of N and potato tubers. Depending on the cultivar, under favorable price conditions (low N price and high tuber price), the economic optimum N fertilization rates to be applied by potato growers were 92–95% of the estimated N fertilization rate for obtaining the maximum potato yield, whereas under unfavorable conditions (high N price and low potato tuber price) the economic optimum N fertilization rates to be applied should be decreased to 86–92% of the rates for maximum yield.     

In vitro evaluation of resistance of potato cultivars toPhytophthora infestans

Summary The resistance of ten potato cultivars (Agria, Ajax, Désirée, Liseta, Kennebec, Majestic. Monalisa, Prima, Spunta and Tonda di Berlino) toPhytophthora infestans was analyzed in vitro using 8 fungal strains. An assay based on electrolyte leakage was used for screening leaves and tuber tissues with fungal culture filtrates. With almost all cultivars the resistance of leaves did not correlate with the resistance of tubers. Cv. Ajax appeared the least susceptible in both leaf and tuber tests, while the cv. Prima was the most susceptible in tuber tests.     

Determination of yield stability in advanced potato cultivars as affected by water deficit and potassium humate in Ardabil region, Iran

This experiment was done on the three potato cultivars [Agria (susceptible), Satina (semi-tolerant) and Ceaser (tolerant to water deficit)] and three irrigation treatments (after 30 mm evaporation from basin class A, after 60 mm evaporation + spraying by Potassium Humate, and after 60 mm evaporation from basin class A) for two locations in 2007. Experimental design was Split Plot with three replications. Potassium Humate spraying (250 mL ha(-1)) were done in three stages of emergence, before tuberization and during tuberization period. Combined analysis of variance showed that there were significant differences between locations, cultivars, irrigation treatments and location x cultivars interaction as effect on tuber yield. Comparison of means for irrigation treatments showed that spraying by Potassium Humate in stress condition induced increasing of tuber yield. Spraying by Potassium Humate in water deficit condition increased tuber yield up to 11.01 ton ha(-1). Ceaser had the highest tuber yield. It had higher tolerance to water deficit as well. Ceaser had a high potential in control and severe stress. Decrease in yield of Ceaser after 60 mm evaporation + spraying by Potassium Humate and after 60 mm evaporation from basin class A, relative to control (after 30 mm evaporation from basin class A) was 1.03 and 13.08 ton ha(-1) but for Satina was 7.83 and 16.61 ton ha(-1), respectively. Satina had the lowest Environmental Variance, Environmental Variance Coefficient, Finlay and Wilkinson's and Eberhart and Russell's model and was the most stable cultivar. Lin and Binns parameter showed that Ceaser and Satina were the most stable cultivars. Results of GMP, STI and MSTI were very considerable and Ceaser and Satina had a high yield in water stress and control conditions.     

Change in Some Glycoalkaloids of Potato under Different Storage Regimes

The potato (Solanum tuberosum L.) is an important food crop worldwide. Potato tubers can be stored to provide continuity of supply between production seasons, but it is important that they be stored under appropriate conditions as incorrect storage will result in deterioration in end user quality and may increase glycoalkaloid levels. We have investigated the effects of types of household storage on potato glycoalkaloid content (total glycoalkaloids [TGA]; α-solanine; α-chaconine) in Turkey. Tubers of potato cultivars (cvs.) Agria and Bettina were stored under four types of storage conditions (indirect sunlight for 10 h per day and dark storage for the remaining 14 h per day; storage under continuous fluorescent light; storage in constant darkness; storage in the dark in a refrigerator) for 56 days. Samples of tubers were taken at the beginning of the storage period and after 14, 28 and 56 days of storage for tuber glycoalkaloid measurement. Tubers stored in the three light environments showed an increase in glycoalkaloid levels; however, none of the cv. Agria tubers reached the critical level of 200 mg/kg tuber. On day 56 the TGA level of cv. Bettina tubers stored under fluorescent light reached 234.31 mg/kg.     

Effect of Different Defoliation Systems of Ryegrass–Clover on Yield and Selected Quality Parameters of Organic Potatoes (Solanum tuberosum L.) for Industrial Processing at Harvest and After Storage

The nitrogen supply plays an important role in achieving quality characteristics in organic potato farming. Different defoliation systems of ryegrass–clover may influence the amount of fixed nitrogen available to the tubers. In a field experiment, the effect of different defoliation systems (cutting, mulching and a combination of them) of the pre-crop ryegrass–clover on selected quality attributes of organically grown potatoes, destined for processing into French fries (cv. Agria) or crisps (cv. Marlen), were conducted in two consecutive years (2003 and 2004). Parameters studied included compounds related to the sensory properties of potato food (tuber dry matter, starch, reducing sugars) as well as nutritional quality (nitrogen, minerals). Selected agronomic parameters such as total tuber yields and tuber size distribution were also compared. Furthermore, the influence of additional slurry fertilisation and 4 months of storage on these parameters were investigated. Total yields and portion of tuber yield 50–60 mm were significantly affected by the pure mulching variant in 2003. In 2003, the starch concentration at harvest, as well as after storage, was above the required minimum of 22% (cv. Marlen) and 19% (cv. Agria), while in 2004, this was slightly beneath these values. In 2004, a significant increase of starch concentration by the pure cutting variant was observed. In both years, mulched ryegrass–clover caused a decrease in tuber DM contents of 2.10 and 3.54%, respectively, compared to the cutting systems. Fertilisation significantly decreased DM and starch concentration. In 2004, the reducing sugar concentration of tubers of cv. Marlen from the pure cutting system was with 2.1 g kg^?1 FM above the required maximum of 1.5 g kg^?1 for crisps. In addition, storage led to a three to fivefold increase of reducing sugars concentrations in the tubers in this year. After slurry fertilisation, 8.8% higher N contents and up to 36% higher K concentrations were measured. Mulching of the pre-crop combined with slurry application led to an up to 61% higher tuber K concentration compared to the cutting system. The results indicate that different defoliation systems of the pre-crop ryegrass–clover and slurry fertilisation had only minor effects on internal tuber quality attributes. Quality parameters were more affected by the prevailing weather conditions in combination with the genotype of different potato cultivars.     

Sequential Path Analysis of Yield Components in Potato

In order to determine proper selection criteria for tuber yield in potato clones obtained from true potato seed (TPS) and to evaluate relationships between tuber yield and its components, an investigation was conducted using the five check cultivars Agria, Marfona, Draga, Agata, and Arinda, and 120 potato clones obtained from TPS. The study was conducted in an augmented randomized complete block design with three replications. Yield and its components were recorded. Correlation coefficient analysis showed that tuber yield had significant positive associations with number of tubers per plant, average weight per tuber (tuber size), plant height, diameter of main stem, and number of main and secondary stems per plant, whereas its correlation with tuber dry-matter concentration was significantly negative. Number of tubers per plant, tuber size, and plant height had significant standardized partial regression coefficients with very small tolerance and large variance inflation factor (VIF) values. These were considered as the first-order variables in sequential path analysis.     

Effects of photoperiod on kinetin-induced tuberization of isolated potato stolons culturedin vitro

Are short-day (SD) conditions inductive or permissive for potato tuberization? This question was addressed using anin vitro culture system. Kinetin induction ofin vitro tuberization in potato stolons cultured in the dark can be partially inhibited by light treatments. Photoperiod required for a major inhibition varied with cultivars: 8 hours for cv. Red Pontiac and 16 hours for cv. Kennebec. Short photoperiods decreased kinetininduced tuberization for all cultivars. Stolons cultured on kinetin-free medium generally did not tuberize, regardless of light treatment. Effects of kinetin and photoperiod on stolon and tuber development are observed. Relationships among kinetin, photoperiod and tuber-inducing stimulus produced under short days are discussed.     

Evaluation of Potato Cultivars for Resistance Against Water Deficit Stress Under In Vivo Conditions

Water deficit is the most important abiotic stress factor in crop production. Evaluation of the response of different potato cultivars to water deficit stress is necessary to release cultivars for regions with water deficit. A split-plot experiment with three replications was carried out during 2005 and 2006. The main factor consisted of three levels of irrigation (irrigation after 25%, 35% and 50% discharge of the available water, i.e. normal conditions, mild stress and severe stress, respectively), and the split factor included seven potato cultivars (Agria, Savalan, Satina, Caesar, Kennebec, Marfona and Santé). Cultivars Savalan, Caesar and Kennebec had higher total and marketable tuber yield, water use efficiency, and values for stress tolerance indices than the other cultivars, both under mild and severe stress conditions. Cultivars Caesar and Kennebec were selected as tolerant cultivars; cultivars Savalan and Satina were identified as moderately tolerant cultivars whereas cultivars Agria, Marfona and Santé proved to be susceptible to water deficit.     

Influence of Growth Regulators on Plant Growth, Yield, and Skin Color of Specialty Potatoes

2,4-D has been used since the 1950’s to enhance color in red-skinned potatoes, but there is little research on the potential use of other plant growth regulators to improve tuber skin color in the wide range of specialty potatoes now available on the market. Field trials conducted at Parma, ID in 2009 and 2010 evaluated the effect of foliar applications of 2,4-D, NAA, and LPE on plant height, foliar injury, tuber yield, size distribution, and skin color of six specialty potato cultivars. Skin color was rated visually and via HunterLab colorimeter at harvest, and again after storage (132 days in 2009 and 93 days in 2010) at 4 °C and 95 % R.H. 2,4-D caused slight foliar injury and reduced tuber size in all cultivars. It also increased visual skin color rating in the red-skinned cultivars ‘Red LaSoda’ and ‘TerraRosa’ at harvest and after storage, and influenced incidence of pink coloration around the eyes of ‘Yukon Gem’ tubers, but did not affect color of blue/purple-skinned cultivars. NAA and LPE did not consistently influence plant growth, yield, tuber size or visual skin color in any cultivar. Colorimetric evaluations mostly agreed with the visual ratings, and indicated that storage significantly altered skin color in all cultivars, regardless of growth regulator treatment.     

Manipulating Aeroponically Grown Potatoes with Gibberellins and Calcium Nitrate

Maximizing tuber number and yield in an aeroponics production system is imperative to make it cost effective and to make the best use of all facilities and inputs. Manipulating the plants hormonal makeup is a strategy. GA3(GA), Calcium Nitrate(CaN) and their combination were foliarly applied several times to potato plants of cvs. Favorita and Mira during both the autumn and spring growing seasons in a semi tropical setting in Sichuan. A contrasting treatment of an anti-gibberellin(Anti) was also studied in both seasons. Significant differences in plants height, stem diameter, chlorophyll content, leaf area index, the number of stolons, the number of stolon branches and tuber production were observed among different treatments and cultivars. For the cv. Favorita, CaN?+?GA and GA increased tuber weight per plant by 63 and 49% in autumn and 53 and 73% in spring respectively as compared to the control(CK); tuber number per plant under CaN?+?GA and GA treatments increased by 90 and 85% in autumn and 35 and 52% in spring respectively. For cv. Mira, the trend was similar but not as dramatic. Tuber numbers over 1400 per square meter were harvested with cv. Mira during the spring season with the GA and CaN?+?GA treatments.     

Potato minituber production using aeroponics: Effect of plant density and harvesting intervals

To optimize minituber production through aeroponics some horticultural management factors should be studied. Potato plantlets, cv Zorba, were grown aeroponically at two different plant densities (60 and 100 plants/m²). Plants showed an extended vegetative cycle of about 5 months after planting. A higher number of stolons was obtained at low plant densities. Tuber formation hastened when supplied N was reduced. Experiments on harvesting intervals (7, 10, and 14 days) indicated that for a density of 60 plants/m², both number of minitubers and yield increased as harvesting interval decreased. Best results were achieved harvesting every 7 days: a total tuber yield of 118.6 g per plant was obtained (four times higher than for 100 plants/m²). Such a yield was composed, on the average, of 13.4 tubers with a mean tuber weight of 8.1 g. Harvesting intervals did not have an effect on the number of minitubers and yield for a density of 100 plants/m². The best productivity obtained in this study was 800 minitubers/m² for weekly harvests and a low plant density (60 plants/m²). We also studied the field performance of aeroponically produced minitubers vs those produced by hydroponics. Minituber behavior under field conditions was independent from the technique used for its production.     

叶片数量调控对雾培马铃薯生长发育的影响

通过去叶和植株下放的处理方式改变雾化栽培马铃薯植株的源强来探讨源器官调控对植株生长的影响。结果表明:去叶和植株下放能显著增加雾化栽培马铃薯植株的高度,但会极显著降低植株的茎粗、分枝数、根系体积、单株匍匐茎数和单株合格薯块数。     

高温下马铃薯试管薯的诱导

对金冠、大西洋、会顺 88等 3个品种进行了高温下、短日照 (8h/d)添加不同浓度BA和蔗糖的切段诱导结薯。结果显示 ,高温抑制了 3个品种的结薯 ,特别对大西洋抑制最强。高温下加入不同浓度的BA对 3个品种产生不一致的影响。高温下蔗糖浓度为 2 % ,不加激素时 ,对这 3个品种不能诱导其结薯     

Influence of Nitrogen Supply of Potato Plantlets on In Vitro Tuberization Pattern under Inductive and Non-inductive Conditions

The effects of nitrogen supply of in vitro plantlets on subsequent in vitro tuberization were examined in three potato varieties. In vitro plantlets were raised on MS media with varying amounts of ammonium nitrate, resulting in 70, 80, 100, 120 and 160% of the standard N content in MS medium and various nitrate : ammonium ratios. Tuberization was induced by adding an 8% sucrose solution to 4-week old plantlets and keeping them 2 weeks under short or long days (8 and 16 h illumination per day, respectively), followed by darkness for 9 weeks. Under long days, a lower nitrogen content in the medium and higher nitrate : ammonium ratio were favourable for the development of large tubers (>6 mm). Under short days, the total number of tubers increased with an increase in nitrogen content of the medium in cultivars Gülbaba and Désirée but not in cultivar Boró, while the number of large tubers was not significantly influenced by nitrogen supply. The tuber weight per plantlet was strongly influenced by genotype. Nitrogen supply of the in vitro plantlets had a prolonged effect on in vitro tuberization. Because the optimum nitrogen treatment is genotype specific, the quantity of large in vitro tubers could be increased by adjusting the nitrogen content of the medium.     

Analysis of <Emphasis Type="Italic">Potato Mop-Top Virus</Emphasis> Survival Probability in Post-Harvest Storage

Potato mop top virus (PMTV) induced necrosis can cause tuber quality loss at harvest and storage. Stored potatoes help maintain a constant supply of potatoes to the market and processing industry. PMTV-induced necrosis continues to develop during storage and appropriate timelines are needed for growers to make marketing decisions of their potatoes before incurring any significant quality losses. Survival analysis was used to estimate the time to event occurrence (PMTV-induced necrosis) in four (red-, russet-, white-, and yellow-skinned) potato market types across six post-harvest assessments conducted over two years. At each assessment the presence and absence of PMTV-induced necrosis was recorded and probability of tuber survival was estimated. Survival curves were significantly different among the four market type potato cultivars (Log-Rank test, P < 0.0005). Red- and russet-market type cultivars showed low and high survival probability, respectively, demonstrating that red cultivars need priority marketing. The survival probabilities decreased with increased storage time during both years, indicating that PMTV-induced necrosis development is dependent on potato cultivar and post-harvest storage. The median (50% of tubers with symptoms) survival times were estimated as 167 and 214 days for red- and other market type potato cultivars. The information from this study could potentially help growers regulate storage times for their cultivars to minimize tuber quality loss due to PMTV-induced tuber necrosis.     

The Effect of Nitrogen Rate on Vine Kill,Tuber Skinning Injury,Tuber Yield and Size Distribution,and Tuber Nutrients and Phytonutrients in Two Potato Cultivars Grown for Early Potato Production

Early potatoes are typically produced using less nitrogen than a full season potato crop as high rates of nitrogen may delay tuber set and lead to excessive vine growth that is difficult to terminate prior to harvest. Bintje and Ciklamen potato cultivars were grown with preplant soil nitrogen levels of 34 to 38, 67, and 101 kg N ha^-1 in 2013 and 2014 near Paterson, Washington. Nitrogen rate had little impact on the number of tubers and stems per plant of both cultivars, but increasing nitrogen rate tended to increase leaf area of both cultivars. Vine desiccation of Bintje with diquat was less complete as nitrogen rate increased, while Ciklamen vine kill was reduced by higher nitrogen in 1 of 2 years. Tuber skinning injury, tuber weight loss, and tuber size distribution were not affected by nitrogen rate. Tuber skinning injury and tuber weight loss were reduced in both cultivars by harvesting at 4 weeks after initial vine kill compared to harvesting at 2 weeks after vine kill. Total tuber yield was lower for both Bintje and Ciklamen in 1 of 2 years at the 34 to 38 kg N ha^-1 rate. Tuber nitrogen and zinc levels tended to increase with increasing nitrogen rates, while most other nutrients, vitamin C, total phenolics, and antioxidant capacity showed little response. It appears that 67 kg N ha^-1 provides adequate nitrogen to produce a good tuber set and yield of small tubers while not producing excessive vine growth that may be more difficult to kill.     

不同营养方式对雾培法生产脱毒种薯的影响

叶面营养在马铃薯种薯生产过程中有着十分重要的作用,但是在种薯生产上只喷叶面营养液的研究还鲜有报道。为了充分了解叶面营养对种薯生产的影响,本试验采用二因素随机区组试验设计,研究3种不同营养方式对雾培法生产脱毒种薯效果的影响。结果表明,这3种营养方式在前期对马铃薯生长影响较小,但块茎形成后,采用叶面营养与根系营养相结合能显著提高马铃薯种薯产量,只喷叶面营养也能形成马铃薯,但是数量很少。这说明叶片对营养的吸收效率较根系高,但是有一定量的限度,这种作用在块茎形成后表现的尤为明显。     

Freezing and Frost Damage of Potato Plants: a Case Study on Growth Recovery,Yield Response,and Quality Changes

The relationship between the severity of natural freezing and frost damage (FFD) and the observed growth recovery and field production of Superior potatoes (Solanum tuberosum L.) was investigated under screen house conditions. Potato plants were damaged by accidental freezing and frost during the early phase of shoot growth, 40 days after planting in highland summer crop areas in Korea. The observations of FFD were classified visually into “severe” (>75%), “moderate” (50%), “mild” (<25%), and “no FFD”, based on the percentage of the area of the shoots which was damaged. The early vegetative growth recovery, in terms of groundcover, was reduced as the level of FFD increased. At 28 days after a freezing and frost damage (DAFF), the potato plants with mild or no symptoms had produced more groundcover than the plants with moderate or severe symptoms. At 35 DAFF, groundcover was the same across all levels of severity, at nearly 100%. Despite the slower canopy development, plants with FFD achieved a higher fresh shoot weight and total chlorophyll content, whereas physiological growth indices such as photosynthetic rate and stomatal conductance of leaves were not different among levels of FFD at 60 DAFF. The number of lateral stems and days to tuberization increased significantly as the level of FFD increased; however, the harvest index, the number of tubers per plant, and seed tuber production were all reduced in plants with severe FFD. In addition, the tubers from plants with severe FFD had an increased ratio of length to width and 40% more tuber eyes than tubers from undamaged plants. The elongated tubers also showed an increase in cell division, demonstrated by higher numbers of cells in the cortical zones. The aforementioned measurements were obtained from natural event and led to a deduction that Superior has a capacity to recover from FFD, unless the plants were severely damaged (>75%) early in the season.