Estimation of genetic parameters for characters related to potato propagation by true seed (TPS) in an andigena population

Genetic variances were estimated for a population ofSolarium tuberosum L. subsp.andigena, selected for adaptation to north temperate climatic conditions. Estimates for 15 traits, including some unique to true seed (TPS) propagation, were obtained from trials conducted under short day conditions in Peru. Only non-additive variance was found for yield, but heritability estimates were relatively high for tuber number and tuber size. The results indicated that yield could be increased through selection utilizing additive variance for the component traits, especially tuber size. Estimates of genetic variability for tuber uniformity were low. TPS yield was positively correlated with most other traits except tuber number.     

马铃薯主要生理性状和产量性状相关性的研究

以大西洋、滇薯6号、PB04和PB08 4个加工型马铃薯品种(系)为供试材料,进行不同品种块茎形成期主要生理性状和收获时产量特性的比较及部分性状间的相关性研究。结果表明:在马铃薯的块茎形成期大西洋的光合速率最强,根系活力较强,抗逆性较强,其农艺性状和块茎产量特征均表现较好。相关分析结果显示,马铃薯的块茎数量、块茎产量、干物质含量和块茎淀粉含量与光合速率呈正相关,生物产量、块茎数量、块茎产量、干物质含量和块茎淀粉含量与叶片电导率呈负相关,而生物产量与根系活力呈正相关。     

Polygene mapping as a tool to study the physiology of potato tuberization and dormancy

Efforts to breed for the ability to tuberize under long days or for the length of tuber dormancy should benefit not only from information on the location of genes associated with these traits, but also from an understanding of the hormones the genes control. Understanding the role of the respective genes is a logical step in developing the best breeding strategy, both for conventional breeding and for gene transfer using molecular techniques. Polygene mapping affords a way to achieve such understanding and is also a tool to study the physiology of potato tuberization and potato tuber dormancy. The addition of DNA markers to a plant population facilitates the mapping of polygenes that control quantitatively inherited traits segregating in the population. A quantitative trait locus denotes a region of chromosome that is linked to the marker gene and which has a significant effect on the quantitative trait under study. Our approach has been to find the quantitative trait loci associated with tuberization and tuber dormancy in a segregating diploid population, and then to map the population for quantitative trait loci associated with levels of hormones implicated in the control of these two traits. We are using a population derived from a hybrid between haploidSolanum tuberosum andS. berthaultii that was backcrossed to a different haploidS. tuberosum. We have found ten quantitative trait loci for the ability to tuberize under long days and eight quantitative trait loci for tuber dormancy. In the same population we have found one or more quantitative trait loci for polyamines, abscisic acid, tuberonic acid, tuberonic acid glucoside, zeatin riboside, and gibberellin A₁. Some of the hormone quantitative trait loci have coincided with quantitative trait loci for tuberization or dormancy. Implications of such commonality are discussed, along with the usefulness and limitations of the methods.     

Hill Shape Effect on Yield,Quality, Stolon Length and Tuber Orientation of Two Potato Cultivars

Potato (Solanum tuberosum L.) cultivars are mostly planted using similar seed piece planting depths and hill shapes even though cultivars have unique tuber and stolon characteristics. A hill-shape study was conducted at Aberdeen, Idaho to determine the effects of hill shape on yield and field-green tuber yields and quality along with stolon length and tuber spatial orientation for two potato cultivars, 'Defender' and 'Summit Russet.' Plots were planted in late April to early May. Prior to emergence four hill shapes were formed: 1) plant-and-drag, 2) broad, 3) normal, and 4) peaked. Defender had higher total yield with the broad hill, but there were no differences among the remaining three hill shapes. For Defender, U.S. No. 1 yield was lower with the plant-and-drag hill shape, and the normal and peaked hills produced lower field-green tuber yield. Hill shape had no effect on total, U.S. No. 1, or field-green tuber yields of Summit Russet. The peaked hill resulted in a deeper uppermost tuber for Defender, while the uppermost tuber was deeper in the normal and peaked hills for Summit Russet. The broad hill resulted in a larger average tuber size for Defender, but hill shape had no effect on tuber size for Summit Russet. Total number of tubers per plant, stolon length and tuber spatial orientation were not affected by hill shape for either cultivar. Hill shape and height are important considerations in maximizing yield of saleable tubers, so needs to be customized according to cultivar-dependent stolon length and tuber orientation characteristics.     

Variations in stolon length and in incidence of tuber roots among eight potato cultivars

The stolon length and percentage of tubers with tuber roots were compared for eight cultivars ofSolanum tuberosum L. over two growing seasons. Although stolon lengths varied considerably within cultivars, there were significant differences in the average stolon lengths among cultivars. The cultivars Norchip and Monona had the shortest stolons whereas Norland had the longest average stolons. The length of the stolon did not appear to be related to color type or time of tuber maturity. Since there was no significant difference in stolon length between years, stolon length appears to be a consistent genetic trait. There was no significant correlation between the stolon length and tuber size. The incidence of tuber roots also showed variation among cultivars, although there was significant variability between times of sampling. Recent studies have demonstrated that to maximize calcium uptake by tubers, the calcium must be placed around the tubers and stolons. Since stolon length determines the location of the tubers in the hill, the stolon length of different cultivars may need to be considered for fertilizer application, cultivation or hilling procedures. Thus, to get maximum benefit from supplemental calcium for Norchip and Monona, application would need to be made close to the main stem. However, in the other cultivars, the majority of the hill would have to be enriched in calcium to effectively supply calcium to the various tubers in the hill.     

Somaclonal variation in tuber traits of potato

Summary About 13,000 somaclones of 17 cultivars and clones of potato were obtained from in vitro callus cultures and individually planted in a greenhouse, followed by tuber generations grown in the field. These plants were subjected to the multistage selection procedure commonly used in potato breeding. Over a period of five years and three field generations the tuber number, size, shape, eye depth, starch content, starch yield and tuber appearance of these somaclones were assessed and compared with that of the controls. These characters varied depending on donor genotype and trait. The frequency of variants was assessed and there were acceptable proportions of desirable abberrants and invariants among the somaclones. Depending on trait the average gain rate for all donor genotypes ranged between 0.2 and 2.3% for-deviants, between 12.2 and 15.5% for invariants and between 0.1–1.4% for +deviants. It is concluded that this technique should be used into potato breeding programmes to improve commercially important characteristics of specific cultivars and breeding clones.     

Selection of Yield-Associated Morphological and Biochemical Traits Using Correlation and Path Coefficient Analysis in Potato (<Emphasis Type="Italic">Solanum tuberosum</Emphasis> L.) in the Foothills of North-Western Himalayas

The objective of the study was to assess the direct and indirect effects of 13 important morphological and biochemical traits on yield enhancement in 28 advanced breeding lines of potato (Solanum tuberosum L.) in the foothills of north-western Himalayas. Tuber yield was positively correlated with number of tubers per plant (r?=?0.76), number of stems per plant (r?=?0.53), number of leaves per plant (r?=?0.43) and tuber weight (r?=?0.37). Furthermore, tuber yield exhibited a significant negative correlation with days to maturity (r?=???0.39). Days to 50% emergence had a significant negative correlation with protein content (r?=???0.42). Path analysis revealed that the components of yield, number of tubers per plant and tuber weight, had high positive direct effects (0.876 and 0.618, respectively) on tuber yield, whereas the effects of other traits were low (≤?0.128). Furthermore, tuber weight had an indirect negative effect on tuber yield through the number of tubers. Tuber size had a low correlation (0.19) with tuber yield because a positive indirect effect (0.451) through tuber weight was balanced by a negative indirect effect (??0.254) through tuber number. The number of stems and number of leaves had positive indirect effects (0.377 and 0.377, respectively) on tuber yield through tuber numbers, whereas days to maturity had a negative indirect effect (??0.298) through tuber numbers. There were virtually no indirect effects through the biochemical traits. The implications for potato breeding are discussed.     

Soft-rot Resistance of Coloured Potato Cultivars (<Emphasis Type="Italic">Solanum tuberosum</Emphasis> L.): The Role of Anthocyanins

Coloured potatoes (Solanum tuberosum L.) rich in anthocyanins are gaining increasing interest on the markets, mainly due to beneficial health effects. Potato varieties containing colour pigments are therefore utilized more and more in actual breeding programmes. In this study, 10 purple-fleshed potato cultivars were compared in their resistance to soft rot caused by Pectobacterium carotovorum (Pc) with 10 white/yellow-fleshed potato cultivars. The results revealed that coloured potato cultivars exhibited on average better resistance to soft rot than white/yellow-fleshed potato cultivars. On tuber halves of purple-fleshed cultivars, the extent of rotting caused by Pc was on average 28.6% lower than on white/yellow-fleshed cultivars. The greater resistance of coloured potatoes coincided with the presence of anthocyanins, higher concentrations of soluble phenols and elevated polyphenol oxidase activity in tuber tissue. These three components were significantly correlated with the extent of rotting caused by Pc. However, coloured and white/yellow-fleshed cultivars were not very different in phenylalanine ammonia-lyase and peroxidase activity. There were also no significant differences in concentrations of dry matter, starch, crude protein and glycoalkaloids. Key findings reveal that total soluble phenols and anthocyanins contributed crucially to resistance expression in tuber tissue of coloured potato cultivars.     

The Effect of Long Term Storage on Bacterial Soft Rot Resistance in Potato

Bacterial soft rot is a serious disease in potato (Solanum tuberosum L.), causing rapid tuber tissue maceration and, consequently, marketable yield loss. Soft rot bacteria, including Pectobacterium carotovorum subsp. carotovorum (Pbc), are favored by moist conditions, which are prevalent in large potato storage facilities. However, although most potatoes in North America are stored before use, there are no published surveys of soft rot resistance in cultivars exposed to long-term storage conditions. Thus, we tested 65 cultivars and 13 breeding lines for soft rot resistance after 6 months of storage. There was a significant effect of cultivar and production environment on soft rot resistance score. During 6 months of storage, tuber soft rot resistance in resistant clones did not change, while it changed in susceptible clones. The three most resistant cultivars to soft rot were Freedom Russet, Anett, and Alaska Red Eye.     

Genetic improvement effects on yield stability in durum wheat genotypes grown in Italy

In durum wheat (Triticum durum Desf.) the improvement of yield stability represents an important component for agricultural progress worldwide. This work reports on the evaluation of the yield performance of 65 durum wheat genotypes (landraces, old and new cultivars with different years of release and advanced breeding lines), in a range of Italian environments to assess the changes in adaptation and yield stability achieved over the last century as results of the genetic improvement. The Additive Main effect and Multiplicative Interaction (AMMI) analysis was used to capture a large portion of the Genotype × Environment interaction (GE) sum of squares and to separate main and interaction effects. The breeding strategies adopted during the last decades have contributed to reduce the interaction of genotypes with environments selecting genotypes with better stability across a wide range of locations and years and modern genotypes outperformed the old ones in all test environments with a strong adaptability to improved fertility. The old cultivars were characterized by a minimal responsiveness to improved environmental conditions, showing an almost stable nominal yield in agreement with the concept of “biological” or “static” stability. In contrast, the modern cultivars were highly responsive to fertility improvements and showed a pronounced adaptation to high-input environments. Notably, within the group of modern cultivars two of them, Tiziana and Giusto, showed a high-yield stability in biological terms and a high nominal yield across the tested environments. Giusto and Tiziana were the best cultivars in terms of both nominal yield and minimal GE interaction, indicating that selecting for improved yield potential may increase yield in a wide range of environments.     

Identification of stem soft rot (Erwinia carotovora subspeciesatroseptica) resistance in potato

Development of potato cultivars resistant to Erwinia species (Erwinia carotovora subspeciesatroseptica, E. carotovora subspeciescarotovora, andErwinia chrysanthemi) causing soft rot of stems and tubers involves identification and transfer of the resistance to breeding lines possessing desirable agronomic traits. In total, 363 accessions of six wildSolanum species, three somatic hybrids and nine sexual progeny of somatic hybrids were screened for stem soft rot resistance. Thirty-one, 50, and 67 percent of accessions ofSolanum boliviense, Solanum chacoense, and Solanumsanctarosae, respectively, were resistant or highly resistant, whereas, 100, 97, and 95 percent of accessions ofSolanum canasense, Solanum tarijense, andSolanum spegazzinii were susceptible or highly susceptible, respectively. Two tuber soft-rot resistant somatic hybrids, A937 and T355-11 produced earlier by the fusion ofSolanum brevidens (PI 218228) andSolanum tuberosum (PI203900) orS. tuberosum cv. Russet Burbank, respectively, and the sexual progeny of A937 andS. tuberosum cv. Katahdin were also highly resistant. Transfer of resistance fromS. brevidens to somatic hybrid (A937) and subsequently to the progeny suggests that the resistance is simply inherited. In addition to the identification of 65 resistant or highly resistant clones of wildSolanum species, this study has identified three tuber soft rot-resistant clones that are also resistant to stem soft rot. Potato cultivars showed a range of responses to the pathogen.     

马铃薯主要块茎性状杂种优势及配合力分析

对马铃薯9个亲本及其不完全双列杂交组配的18个杂种无性一代的8个性状进行了杂种优势和配合力分析。结果表明:①8个性状均具有一定程度的杂种优势,超中亲优势的大小顺序为:烂薯率>块茎产量>结薯数>淀粉含量>单个块茎重>薯形>块茎外观>结薯习性;超高亲优势的排列顺序则为:结薯数>单个块茎重>块茎产量>块茎外观>烂薯率>淀粉含量>薯形>结薯习性。②品种P(2L0031-17)、P(4陇薯3号)、P(7L0218-38)、P(995D-P-8)具有较好的一般配合力,是理想的亲本材料。③组合P1×P4、P2×P9在淀粉含量、块茎产量等性状上具有较高的特殊配合力,产生较强的杂种优势。在马铃薯高淀粉育种中应选择高淀粉材料作为亲本之一,选配组合时亲本最好采用高×高类型或高×低类型配置组合。     

Breeding Potential of Potato Somatic Hybrids: Evaluations for Adaptability,Tuber Traits,Late Blight Resistance,Keeping Quality and Backcross (BC<Subscript>1</Subscript>) Progenies

Ten tetraploid interspecific potato somatic hybrids developed earlier through protoplast fusion between the dihaploid Solanum tuberosum L. ‘C-13’ and the diploid wild species Solanum pinnatisectum Dun. were used in this study. Somatic hybrids and standard control cultivars were evaluated for adaptability, tuber traits, late blight resistance and keeping quality attributes (dormancy, sprouting, weight loss and appearance after 75 days of storage) during two successive winter crop seasons (short-days) in the sub-tropical plains of India, where nearly 90% of India’s potatoes are grown. Somatic hybrids showed medium to good plant vigour and late to very late plant maturity. Though none of the somatic hybrids produced equal or higher tuber yield than the control cultivars, except clone P7, all other somatic hybrids produced significantly higher marketable and total tuber yield after a 90-day growth than the parent C-13. Most of the somatic hybrids possessed higher tuber dry matter concentration, resistance to late blight and better keeping quality attributes than the control cultivars. Notably, the tubers of somatic hybrids showed a tendency for colour change from white to purple on exposure to sunlight. Breeding potential of somatic hybrids was further assessed by crossing them with commonly grown local potato cultivars for the development of backcross (BC₁) progenies. In the hybridization programme, berries were formed while somatic hybrids were used either as male or female parents with common cultivars. Our results revealed that the use of bulk pollen of somatic hybrids not only resulted in higher pollination success but also helped to achieve higher numbers of true potato seeds (TPS) per berry. Despite the formation of berries, TPS was absent in 22 crosses using somatic hybrids as a female or male parent which may be due to ovule or embryo abortions. Segregating BC₁ generations were evaluated under the same sub-tropical conditions for further exploitation in potato breeding. Based on our study, the somatic hybrids P4, P8 and P10 can be utilized for the introgression of important characters such as high tuber dry matter concontration, resistance to late blight and excellent keeping quality attributes into the cultivated potato via conventional breeding methods for cultivar development in the sub-tropical plains of India.     

Effect of random mating on yield and specific gravity in twoSolanum tuberosum subsp.tuberosum populations

A group of biparental crosses of breeding clones and varieties (Solanum tuberosum subsp.tuberosum) from the USDA potato breeding program, Beltsville, MD, was used to establish two randomly mated populations. Random mating without selection was continued for seven generations, then cycles 1, 3, 5, and 7 were tested for yield and specific gravity. There was a small but non-significant decrease in tuber weight per hill, and a small but non-significant increase in tuber number from cycle 1 to cycle 7. Mean tuber weight significantly (P < 0.01) decreased (12%) from cycle 1 to cycle 7. Specific gravity also significantly (P < 0.10) decreased over cycles. The variance of clones within cycles did not significantly change over cycles for any of the traits measured.     

Screening of Iranian Potato Germplasm for Resistance to the Potato Tuberworm Phthorimaea operculella (Lepidoptera: Gelechiidae)

The potato tuberworm, Phthorimaea operculella (Zeller), is an important insect pest of potato, Solanum tuberosum L., both in storage and in the field. In this research, tubers of eight commercial potato cultivars and four Iranian selections with equal weight and dormancy were exposed to 10 pairs of adult P. operculella in a climate chamber set at 25?±?1 °C, 65?±?5 % RH and total darkness. In a free-choice situation, oviposition was lower on 397082–2, Khavaran and Morene compared to the other germplasm that were exposed to adults of P. operculella. Number of mines per tuber, length of mines per tuber, time of development of larvae, number of pre-pupae produced per tuber, weight of pre-pupae and number of eggs developed in ovaries per female were counted and/or measured on each commercial cultivar and selection. There were fewer and shorter mines on tubers of 397082–2, Khavaran and Morene compared to the other potato germplasm. The number of pre-pupae produced per tuber and the weight of pre-pupae were lower when P. operculella was reared on tubers of 397082–2, Khavaran and Morene. Also the development, survival and fecundity were lower when P. operculella was reared on those same germplasm. Flesh firmness was negatively correlated with larval survival (r ²?=?0.87); in addition, the percentage of starch and macronutrient composition was low on these three germplasm. Thus, tuber flesh firmness of these germplasm could delay larval penetration and lower establishment 397082–2, Khavaran and Morene showed promising traits that can be integral component of potato breeding for resistance to P. operculella and pest management programs.     

Starch Characteristics of Modern and Heirloom Potato Cultivars

In a number of ways, modern potato breeding efforts differ from those that created heirloom cultivars. As a result of the rapid expansion of the potato processing industry in the mid twentieth century, potato breeders shifted their focus from fresh market varieties to those intended for the fry and chip markets. Selection for higher dry matter content and lower reducing sugar levels in tubers was successful. This study sought to determine whether modern processing cultivars differ from heirloom cultivars for two major characteristics of tuber starch, amylose content and starch granule morphology. Since breeding efforts for processing potatoes have focused on the maintenance of tuber quality during storage, these parameters were measured in both fresh and stored tubers. Twenty cultivars selected to span the range of cultivar release dates in the U.S. were grown at Hancock, WI in 2009 and 2010 and evaluated for tuber amylose content and measurements of starch granule surface area, length, width, length to width ratio, and smoothness. These traits were found to be stable across years and during storage. Significant differences in the amylose content and starch granule morphology exist among cultivars, but there is no clear distinction between modern and heirloom cultivars. Genetic variation for amylose content and starch granule morphology was found within the set of clones sampled for this study. However, germplasm with higher amylose content will need to be identified and utilized in breeding if the nutritional benefits associated with high fiber and low glycemic index are to be realized.     

Selection for individual traits in the early generations of a potato breeding program dedicated to producing cultivars with tubers having long shape and russet skin

Early generation selection in a potato breeding program involves visual assessment of economic worth based on appearance. Efficiency could be improved by using individual characteristics with defined selection behavior. This study was done to define the selectability of visible traits used for selection in the early generations of potato breeding. Twenty-seven traits were evaluated through three clonal generations using two hundred clones, twenty from each of ten crosses, taken from a population created to produce cultivars with long tuber shape and russet skin. Genotype × environment interactions, heritabilities, correlation coefficients among generations and locations, and rejection pattern analysis were used to quantify the consistency of expression for each trait. The chosen traits showed a wide range of heritabilities and consistency of expression. Traits were divided into three categories: those amenable to positive selection, those appropriate for negative selection, and those which should be ignored. The study showed positive selection to be possible for degree of skin russetting, and the incidence and severity of skin defects. It showed negative selection to be appropriate for incidence of second growth, growth cracks, tuber malformations, tuber curvature, pointed ends, the incidence and severity of russet patchiness, eye depth, tuber shape, yield, tuber number, average tuber weight, and flatness. To a lesser extent, negative selection could be used to reduce eyebrow prominence, degree of eye covering, and prominence of internodes. Traits too inconsistent for use in selection in early generations included uniformity of skin russetting, uniformity of tuber shape, and uniformity of tuber size. Severity ratings for second growth, growth cracks, tuber malformations, tuber curvature, and pointed ends were inconsistent and should not be used in lieu of incidence scores for the same traits.     

Performance of populations derived by selecting for resistance to potato leafhopper in A 4XSolanum Tuberosum X 2XSolanum Chacoense cross

Intercross and backcross populations derived from aSolanum tuberosum L. (2n = 2x = 48) ×Solanum chacoense Bitt. (2n = 2x = 48) cross by selecting for resistance to potato leafhopper (PLH) (Empoasca fabae Harris), were tested in the field. In F2 and F4 populations, the levels of nymphal infestation and leaf necrosis from PLH feeding were considerably lower and tuber yields were much lower compared with those measured on the susceptible cultivar Kennebec. No differences were found between the two populations. Backcrosses of the F2 and F4 populations toS. tuberosum decreased resistance to PLH. Resistance to infestation was still greater than that of Kennebec; severity of leaf necrosis equaled that of Kennebec. Tuber yields increased, but were less than Kennebec’s yield. Foliage types shifted closer to those ofS. tuberosum. Three generations of selection and intercrossing within the backcross populations did not change the level of resistance to PLH but did tend to lower tuber yields. Foliage types remained primarilyS. tuberosum in appearance although distinctive types segregated with increased frequency. A second backcross toS. tuberosum did not change the level of resistance to PLH or the level of tuber yield relative to those of the first backcross or Kennebec.     

Potato (Solanum spp.) in the hot tropics. VI. Plant population effects on soil temperature,plant development and tuber yield

Nine experiments were run at three hot tropical sites (5–12°S, 180–800 m) within Peru to quantify the influence of plant population on soil temperature and growth and yield of the potato.Radiation interception was greatest at the highest plant populations and soil cooling was directly proportional to the amount of crop cover over the soil, but no appreciable effect on the timing of tuber initiation was apparent. More stems per unit land area leading to a higher leaf area index (lai) were primarily responsible for greater interception of radiation at the higher plant populations, although some compensation in stem number per unit land area and in lai at lower populations was evident later in the season.In general, tuber yield increased linearly with increases in planted population over the range studied (2.7–12.5 plants m⁻², and in one experiment to 31.7 plants m⁻²), and was proportional to increases in the amount of intercepted radiation. Tuber yields ranged from 8 to 60 t ha⁻¹ over sites and populations. Vigorous clones with Solanum tuberosum spp. andigena in their genetic background constituted the exceptions to this linear trend, and for these clones yields declined at the highest populations, particularly when the rectangularity of planting vastly deviated from square patterns. Tuber yield of Solanum tuberosum spp. tuberosum and Neotuberosum (S. tuberosum spp. andigena selected for tuberization under long-day conditions) clones did not respond to variations in rectangularity of planting and, probably due to their small stature and early maturity, did not demonstrate signs of intense between-plant competition for tuber yield as measured with the Kira competition density index. In contrast, for clones with Solanum tuberosum ssp. andigena in their genetic background, maximum tuber yield at populations greater than 5.5 plants m⁻² was dependent on the rectangularity of planting, and declined as the latter deviated from squareness.Since the proportion of marketable tubers was scarcely affected by the planting densities, plant population of S. tuberosum ssp. tuberosum clones planted in hot climates should be as close as possible without limiting the amount of soil available for hilling-up.