Long-term growth and yield effects of respacing natural regeneration of Sitka spruce in Britain

Stands of Sitka spruce (Picea sitchensis (Bong.) Carr.) originating from natural regeneration can be extremely dense with high mortality, poor growth form and low volume production. Although costly, respacing (pre-commercial thinning) can reduce resource competition for the remaining trees, altering the final crop produced. Three experiments were established to examine the effect of respacing 1–2 m tall trees to different target densities. The impact on stand growth and yield was measured 11–17 years after respacing, and the longer-term impact was modelled to year 50. Unrespaced control treatments self-thinned at a similar and constant rate at two sites. At the third, extremely high initial density resulted in a higher rate of self-thinning and lower density after 11 years. Wider respacing treatments resulted in larger mean tree diameter, but there was no significant effect of respacing on stand volume 11–17 years after respacing; greater diameter growth did not compensate for low tree number. Results indicate a volume penalty associated with delaying respacing until trees were 4 m tall, but this treatment was unreplicated. Modelled stand volume in year 50 was higher for the 2.6 m × 2.6 m respacing treatment than for the 1.8 m × 1.8 m, 2.1 m × 2.1 m or 3.3 m × 3.3 m treatments. However, open-grown conditions may reduce timber quality compared to closer spacing treatments. The results are presented using a stand density management diagram for Sitka spruce growing in Canada and support recent suggestions that British stands have a shallower size–density relationship than Canadian stands.     

Annual and spatial variation in coning shown by the Forest Condition Monitoring programme data for Norway spruce, Sitka spruce and Scots pine in Britain

Conifer seed is a valuable forest resource; as well as beingreproductive material, it is an important foodstuff for manywoodland species. Information on cone and therefore seed productionof the main forest species are useful in the fields of bothforest management and forest ecology. Coning has been recordedsince 1989 in plots of Norway spruce, Sitka spruce and Scotspine across Britain as part of the Forestry Commission's ForestCondition Monitoring programme. An 11-year period of these recordswas analysed and a summary of annual cone production by speciesand coning synchrony is presented. Both Norway spruce and Sitkaspruce coned sporadically, with a 4-year period between mastcrops during which cone density was very low or cone productionabsent, whereas Scots pine produced a good cone crop in mostyears throughout Britain. Coning was synchronous within andbetween Norway and Sitka spruce across the whole of Britain(at distances >600 km) but coning within Scots pine was insynchrony only over distances of up to 200 km. Synchrony ofcone production was not evident between the spruce species andScots pine. These findings have implications when planning andinterpreting monitoring used to predict cone crops and in thedesign of forests for wildlife conservation.     

Interception of precipitation by pole-stage Sitka spruce and lodgepole pine and mature Sitka spruce at Kielder Forest, Northumberland

Interception loss was measured indirectly for 3 years in adjacentunthinned 25-year-old stands of Sitka spruce and lodgepole pineand for 2 years in a 63-year-old selectively thinned stand ofSitka spruce. For each stand measurements were made of grossprecipitation, throughfall and stemflow. Interception loss wasderived by subtracting the sum of throughfall and stemflow (netprecipitation) from gross precipitation. For the years 1977–78, 1978–79 and 1979–80,interception losses in the pole-stage Sitka spruce were 32,28 and 27 per cent of gross precipitation respectively whilethose in the lodgepole pine were 33, 29 and 26 per cent. For1979–80 and 1980–81 interception losses in the matureSitka spruce were 44 and 53 per cent of gross precipitation.The average interception loss was 29 per cent for both pole-stagecrops and 49 per cent for mature Sitka spruce. The proportions of net precipitation reaching the ground asstemflow and throughfall were 0.18 and 0.82 respectively forthe pole-stage Sitka spruce, 0.14 and 0.86 for the pole-stagelodepole pine and 0.02 and 0.98 for the mature Sitka spruce.     

Effects of rotation length on the grade recovery and wood properties of Sitka spruce structural timber grown in Great Britain

Context   

Rotation length is known to affect timber quality in many plantation species, but its effect on the properties of Sitka spruce (Picea sitchensis) structural timber has not been quantified.     

Bending and shear properties of compressed Sitka spruce

We examined the bending and shear properties of compressed wood using small and clear specimens of Sitka spruce (Picea sitchensis Carr.). For measuring the bending properties, three-point bending tests were conducted under the span/depth ratio of 14, which is standardized in the American Society for Testing and Materials [ASTM D143-94 (2005a)] and Japanese Industrial Standards [JIS Z2101-94 (1994)]. In the bending test, the load, deflection at the midspan, and strain at the bottom of the midspan were simultaneously measured, and Young’s modulus and bending strength were obtained by elementary beam theory. For obtaining the shear modulus and shear strength, asymmetric four-point bending tests were conducted using the specimens with rectangular and side-grooved cross sections, respectively, and the influence of the compression ratio on the shear properties was examined. The results are summarized as follows: (1) Young’s modulus increased with increasing compression ratio when it was determined by the load–strain relation. Nevertheless, this tendency was rather obscured when Young’s modulus was determined by the load–deflection relation. Hence, it is preferable that Young’s modulus is measured from the load–strain relation. (2) The shear modulus in the longitudinal–tangential plane was maximum at the compression ratio of 50%, whereas that in the longitudinal–radial plane was minimum at the compression ratio of 50%. (3) The influence of the compression on the bending and shear strength ratio was not significant.     

Differences in mycorrhizal status among clones of Sitka spruce

Cuttings of Sitka spruce clones with the same maternal parentage were rooted under mist and examined after they had been grown for a year in a forest nursery. All short roots were found to be mycorrhizal, but one clone differed from the others in the proportion of the roots colonized by different mycorrhizal fungi. Substantial clonal differences in root morphology were partially explained by these mycorrhizal differences. The significance of the host-fungus genotype interaction is discussed.     

Foliage browning and shoot death in Sitka spruce and other conifers in northern Britain during winter 1983–84

A hitherto undescribed form of injury to Sitka spruce and other conifers occurred in plantations throughout northern Britain during the dormant season 1983–84. Damage consisted primarily of shoot death which was typically concentrated in a zone of variable extent below the upper few whorls of the tree. It occurred predominantly in forests in the west and was most severe in older crops at high elevation. Possible causes are discussed and it is concluded that the damage was probably climatic in origin.     

Vibrational properties of Sitka spruce heat-treated in nitrogen gas

Sitka spruce (Picea sitchensis Carr.) wood was heated for 0.5–16.Oh at temperatures of 120°–200°C in nitrogen gas or air. The values for Young's modulus, shear modulus, and loss tangent were measured by free-free flexural vibration tests. X-ray diffractometry was carried out to estimate the crystallinity index and crystallite width. The results obtained are as follows: (1) Density decreased at higher temperatures and longer heating times. The specific Young's modulus, specific shear modulus, crystallinity index, and crystallite width increased during the initial stage and were constant after this stage at 120°C and 160°C, whereas they increased during the initial stage and decreased later when the temperature was high. Loss tangent in the longitudinal direction increased under all conditions, whereas that in the radial direction increased at 120°C and decreased at 160°C and 200°C. (2) From the relation between Young's modulus and moisture content, it can be safely said that Young's modulus is increased by the crystallization and the decrement in equilibrium moisture content, and that crystallization (rather than degradation) is predominant at the initial stage of the heat treatment, whereas the latter is predominant as the heating time increases. (3) It is implied that the specific Young's modulus, specific shear modulus, crystallinity index, and crystallite width decreased more in air than in nitrogen gas because of oxidation in air.This study was presented in part at the 43th Annual Meeting of Japan Wood Research Society at Morioka, August 1993, the 44th Annual Meeting of Japan Wood Research Society at Nara, April 1994, and the 45th Annual Meeting of Japan Wood Research Society at Tokyo, April 1995     

Regeneration dynamics of Sitka spruce in artificially created forest gaps

This study examined the variation in the development of naturally regenerated and planted seedlings of Sitka spruce (Picea sitchensis (Bong.) Carr.) within gaps cut in a 32-year-old stand of the same species. The circular gaps were 20 m in diameter and designed to allow sunlight into only half of the gap floor at midsummer given the latitude of 56°45′N. Eight plots (8 m × 3 m) were laid out along a north–south transect through each gap (four within the gap and two each under the closed canopy north and south of the gap). Each plot was sub-divided and seedlings were planted into one part and the other part was left to naturally regenerate. In subsequent seasons, plots were further subdivided into ‘weed free’ and ‘vegetation left untouched’. Results showed that while the two central plots within the gaps had the highest value of canopy openness, the highest accumulated temperature and lowest soil moisture were recorded in plots that received direct sunlight. However, level of germination was significantly higher in the shaded area of the gap than in the part that received direct sunshine suggesting that higher moisture levels in shaded areas are important to successful germination. Minimal germination was recorded in the plots beneath the canopy. Seedling survival was significantly influenced by the influx of competing vegetation, but only in the part of the gaps that received direct sunlight. The success of Sitka spruce regeneration within gaps appears to depend on sufficient moisture and light to support regeneration and early growth, but not too much light to encourage the development of competing vegetation. The permanently shaded areas of the gaps appeared to offer ground conditions with sufficient moisture and light to ensure successful germination and early growth of seedlings, but without excessive competition from other vegetation.     

Effects of seed size on seedling attributes in Sitka spruce

No statistically-significant effects of size (small and large) of wind-pollinated seeds from 18 seed-orchard clones could be found in the attributes of 8-month-old seedlings of Sitka spruce (Picea sitchensis (Bong.) Carr.). Clonal variations in seedling attributes was highly significant (P < 0.01), but these variations were within regional specifications for operationally-produced nursery stock.     

Isolation of symbiont and associated fungi from ectomycorrhizas of Sitka spruce

Isolation of symbiont and associated fungi from ectomycorrhizas of Sitka spruce from three Irish forest plantations is described. Frequent emergence of dark sterile mycelia and Oidiodendron spp., predominantly O. maius, restricted the recovery of potential symbionts. Inhibition of the former by benomyl resulted in a sixfold increase in basidiomycetes isolated. Pure culture syntheses confirmed the ectomycorrhizal ability of potential symbiont isolates and demonstrated the parasitic nature of dark sterile mycelial types. Antagonism of Mycelium radicis atrovirens, Phytophthora cinnamomi and Heterobasidion annosum by O. maius observed in paired cultures supports the possible involvement of this species in biological control of conifer root pathogens.