Ring characteristics and screw withdrawal resistance of naturally regenerated <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> var. <Emphasis Type="Italic">formosana</Emphasis> trees

The ring characteristics and screw withdrawal resistance (SWR) of naturally regenerated Taiwan yellow cypress (Chamaecyparis obtusa var. formosana) trees were explored. Significant differences in average ring width (RW), earlywood width, latewood width, ring density (RD), earlywood density (ED), latewood density (LD), highest density (D_max), lowest density (D_min), latewood percentage (LWP), and SWR were observed between trees, rings (SWR excluded), and tree height positions. The RW components in the radial direction increased from the pith outward to about the 3rd to 5th ring and then decreased to about the 25th ring; it was almost constantly sustained toward the bark side. The RD in the radial direction slowly decreased from the pith outward to the bark side. Average ring width and ring density were significantly affected by the various tree growth rates, radial ring numbers, and tree height positions. ED, LD, D_max, D_min, and LWP were the most important factors determining the overall RD. RW did not correlate with tree RD. SWR is correlated with ED, RD, D_min, LWP, and intra-ring density variation (IDV). Thus, the SWR can be used to predict wood density and in nondestructive evaluation of a living tree.     

Genetic control of intra-ring wood density variation in hybrid larch (Larix gmelinii var. japonica × L. kaempferi) F1

Genetic parameters for various wood density traits were estimated in 29-year-old trees of 18 full-sib families of hybrid larch (Larix gmelinii var. japonica × Larix kaempferi) F₁. Intra-ring density variation (IDV) was also evaluated using a model that expresses the pattern curve from earlywood to latewood as a power function. A high IDV indicates an abrupt change in wood density from earlywood to latewood. The ring width and wood density traits of individual rings were determined by X-ray densitometry. Overall wood density (RD) was shown to increase with increasing ring number, ranging from 0.42–0.59 g/cm³, whereas IDV of individual rings decreased gradually from pith outwards. Estimates of individual tree narrow-sense heritability of RD and IDV were 0.66 and 0.67, respectively. IDV showed negative genetic and phenotypic correlations with RD (r _g = −0.99, r _p = −0.72). The predicted genetic gains in latewood proportion and IDV were higher than that of RD. These results suggest that the intra-ring density variation is under moderate genetic control equivalent to wood density. The trend of increasing wood density from earlywood to latewood was associated with changes in both tracheid diameter and cell wall thickness.     

Relationships among selected wood properties of 20-year-old Taiwania (<Emphasis Type="Italic">Taiwania cryptomerioides</Emphasis>) trees

The relationships between bending properties, compressive strength, tracheid length, microfibril angle, and ring characteristics of 20-year-old Taiwania (Taiwania cryptomerioides Hay.) trees were examined. The trees came from different thinning and pruning treatments, but the practices showed no significant effect on the investigated properties. The results showed that based on comparison with the literature, plantation-grown immature Taiwania have noticeably lower average strength properties than mature trees of the same species. Wood density and bending and compressive strengths were not related to either tracheid length or microfibril angle in young Taiwania. There were positive relationships between bending strength and compressive strength. The wood density, ring width, earlywood width, earlywood density, and latewood percentage were the most important predictors of strength by simple linear regressions. The wood density and ring width/earlywood width may be considered as indicators for assessing the bending strength, while wood density and latewood percentage were the best predictors of compressive strength by multiple linear regressions.     

Variability of selected wood characteristics in 40 half-sib families of black spruce (Picea mariana)

Summary Based on 15-year-old black spruce (Picea mariana) trees from 40 half-sib families sampled from 9 blocks of a family test in New Brunswick, this study examined intertree and intratree variation in various wood density and ring width characteristics. Of various variance components of the intertree variation, a remarkable variance component due to family was found in wood density characteristics (viz. average wood density, average earlywood density and latewood density of the tree), and these characteristics are thus under strong genetic control (h _i ² ranging from 0.60 to 0.86, and h _f ² from 0.56 to 0.68). It, to a lesser extent, applies to ring width characteristics at the tree level (viz. average ring width, and average earlywood width, latewood width and latewood percent of the tree) that show a lower heritability (h? from 0.18 to 0.28, and h _f ² from 0.22 to 0.36). Both block and block × family interaction contribute little to the total intertree variation encountered in 40 families from 9 blocks, while tree-to-tree variation within the family accounts for most (over 3/4) of the total intertree variation.Compared to the intertree variation (tree-to-tree variation within the family), the intratree variation in various wood characteristics studied is considerably larger in this species. It appears that most intraring wood density characteristics show a relatively smaller intertree variation but a relatively larger intratree variation as compared to ring width characteristics (except latewood width and latewood percent). Latewood width and latewood percent show the smallest intertree variation and the largest intratree variation. Between the two sources of the radial intratree variation, cambial age explains much more variation in most intraring wood density characteristics, while ring width accounts for more variation in earlywood width, latewood width and intraring density variation. This indicates that wood density of growth rings in this species is dependent more on cambial age than ring width (growth rate). Among various wood density and ring width characteristics studies, maximum (latewood) density shows the strongest response to calendar year. This characteristics is thus a useful dendroclimatic parameter in this species.I would like to thank Dr. E.K. Morgenstern and Mr. D. Simpson for their involvement in the planning of this study. Thanks are also due to G. Chauret, T. Keenam, R. Ploure, V. Steel and C. Reitlingshoefer for their technical assistance     

Genetic parameters for early wood and latewood densities and development with increasing age in Scots pine

? Each annual ring in pines consists of earlywood and latewood with considerable difference in density and width. To get a better determination of the genetic regulation of total wood density in Scots pine (Pinus sylvestris L.), density and width of those ring sections were measured in annual ring numbers 12 to 21 of Scots pines in a full-sib progeny test. Tree height and stem diameter were also measured.

? Heritabilities for the annual ring sections increased with age for earlywood density from 0.08 to approximately 0.25; latewood density showed similar reductions. Heritability over all 10 annual rings was 0.25 for earlywood density, 0.22 for latewood density, 0.29 for height and 0.10 for stem diameter. Genetic correlations between earlywood and latewood density and growth traits were negative, while they were strongly positive between densities of adjacent annual rings (0.70–1.0).

? Despite the higher heritability of earlywood density, the strong positive genetic correlation between those traits indicates little benefit from focusing solely on earlywood density when selecting for wood density. Analysing earlywood and latewood separately does not benefit from including the width of the corresponding ring section as a covariate. Juvenile wood may possibly turn into mature wood 15–20 y from the pith.

     

Variations and correlations of various ring width and ring density features in European oak: implications in dendroclimatology

Summary Variations and correlations of various ring width and ring density features were analyzed in 18 European oak (Quercus petraea andQuercus robur) trees from northeastern France. In light of these analyses, the goodness of various tree-ring features as a climatic parameter was discussed. In general, ring density features (viz. earlywood density, latewood density, average ring density, minimum density and maximum density) show a stronger response to calendar year, a comprehensive climatic variable, than ring width features (viz. earlywood width, latewood width, total ring width and latewood percent). The response of latewood features (viz. latewood width, latewood density and maximum latewood density) is stronger than that of earlywood features (viz. earlywood width, earlywood density and minimum earlywood density). Average ring density seems to be the most sensible tree-ring feature in European oak in terms of the response to calendar year. Moreover, total ring width as a climatic parameter is not as good as latewood width, and maximum (latewood) density and minimum (earlywood) density appears not to contain as much climatic information as (average) latewood density and (average) earlywood density, respectively.This project was supported by the institut National de la Recherche Agromonique (INRA). Thanks are due to Dr. G. Nepveu for his constant encouragement and assistance during this study     

Elevated temperature and CO(2) concentration effects on xylem anatomy of Scots pine

We studied the effects of elevated temperature and carbon dioxide concentration ([CO(2)]) alone and together on wood anatomy of 20-year-old Scots pine (Pinus sylvestris L.) trees. The study was conducted in 16 closed chambers, providing a factorial combination of two temperature regimes and two CO(2) concentrations (ambient and elevated), with four trees in each treatment. The climate scenario included a doubling of [CO(2)] and a corresponding increase of 2-6 degrees C in temperature at the site depending on the season. Anatomical characteristics analyzed were annual earlywood, latewood and ring widths, intra-ring wood densities (earlywood, latewood and mean wood density), tracheid width, length, wall thickness, lumen diameter, wall thickness:lumen diameter ratio and mass per unit length (coarseness), and numbers of rays, resin canals and tracheids per xylem cross-sectional area. Elevated [CO(2)] increased ring width in four of six treatment years; earlywood width increased in the first two years and latewood width in the third year. Tracheid walls in both the earlywood and latewood tended to become thicker over the 6-year treatment period when temperature or [CO(2)] was elevated alone, whereas in the combined treatment they tended to become thinner relative to the tracheids of trees grown under ambient conditions. Latewood tracheid lumen diameters were larger in all the treatments relative to ambient conditions over the 6-year period, whereas lumen diameters in earlywood increased only in response to elevated [CO(2)] and were 3-6% smaller in the treatments with elevated temperature than in ambient conditions. Tracheid width, length and coarseness were greater in trees grown in elevated than in ambient temperature. The number of resin canals per mm(2) decreased in the elevated [CO(2)] treatment and increased in the elevated temperature treatments relative to ambient conditions. The treatments decreased the number of rays and tracheids per mm(2) of cross-sectional area, the greatest decrease occurring in the elevated [CO(2)] treatment. It seemed that xylem anatomy was affected more by elevated temperature than by elevated [CO(2)] and that the effects of temperature were confined to the earlywood.     

Scots pine responses to elevated temperature and carbon dioxide concentration: growth and wood properties

Growth and wood properties of 20-year-old Scots pine (Pinus sylvestris L.) trees were studied for 6 years in 16 closed chambers providing a factorial combination of two temperature regimes (ambient and elevated) and two carbon dioxide concentrations ([CO2]) (ambient and twice ambient). The elevation of temperature corresponded to the predicted effect at the site of a doubling in atmospheric [CO2]. Annual height and radial growth and wood properties were analyzed during 1997-2002. Physical wood properties analyzed included early- and latewood widths and their proportions, intra-ring wood densities, early- and latewood density and mean fiber length. Chemical wood properties analyzed included concentrations of acetone-soluble extractives, lignin, cellulose and hemicellulose. There were no significant treatment effects on height growth during the 6-year study. Elevated [CO2] increased ring width by 66 and 47% at ambient and elevated temperatures, respectively. At ambient [CO2], elevated temperature increased ring width by 19%. Increased ring width in response to elevated [CO2] resulted from increases in both early- and latewood width; however, there was no effect of the treatments on early- and latewood proportions. Mean wood density, earlywood density and fiber length increased in response to elevated temperature. The chemical composition of wood was affected by elevated [CO2], which reduced the cellulose concentration, and by elevated temperature, which reduced the concentration of acetone-soluble extractives. Thus, over the 6-year period, radial growth was significantly increased by elevated [CO2], and some wood properties were significantly affected by elevated temperature or elevated [CO2], or both, indicating that climate change may affect the material properties of wood.     

Growth and wood density of Pinus taeda L. as affected by shelterwood harvest in a two-aged stand in Southern Brazil

Pine plantations are an important wood source in Brazil, with Pinus taeda being most frequently planted. Most pinewood is directed to the paper and pulp industry, but there is an increasing demand for wood for solid end-uses, requiring large stems from longer rotations which can be obtained using P. taeda as the canopy in two-aged stands. We evaluated radial growth and wood density at different stem heights of P. taeda in the highlands of Southern Brazil over a production period of 36 years and subjected to shelterwood harvest. Cross-sectional disks were obtained from 15 trees in different stem heights; 10 were used for growth analyses and 5 for growth and density analyses. We used disk images and X-ray techniques for growth and density analyses, respectively. Samples were analyzed for ring (width and density), earlywood, and latewood (width, density, and proportion). Ring width varied between 0.4 and 1.7 cm, with the widest rings in the first years (3–5 years.) of growth. Ring density increased with age, with higher densities on the lower stem portions. Mature wood started to be formed from the 16th ring onwards. Shelterwood harvest affected both ring width and density, but the effects on ring width lasted for at least 5 years, while the effects on wood density were short-lasting. Mature P. taeda trees increased their size after the shelterwood harvest without compromising their wood density. Longer production periods of P. taeda as retained trees in the canopy of two-aged stands provide high-quality wood for structural purposes.

     

Wood properties of young Douglas-fir in Southern Italy: results over a 12-year post-thinning period

This paper describes the study of a 31-year-old Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) stand located in Southern Italy, which was thinned 19 years after planting. The aim of the study is to evaluate the influence of three thinning treatments (unthinned, selective, and geometrical) performed twelve years later on wood density (WD), moisture content, shrinkage, ring width (RW), latewood proportion (LW%), modulus of elasticity, compression (CS), and bending strength (BS). The WD was higher in the unthinned stand. LW% and BS were lowest in the selective thinning and in the geometrical thinning, respectively. No significant differences were found in other variables. In addition, the thinning processes mostly affected the medium tree class more than the dominant and suppressed ones. Regression analysis established a correlation between mechanical characteristics and WD, RW and LW%. Mechanical strength is strongly correlated with WD than other variables. The stepwise model showed that WD and RW are most closely related to the behavior of CS, whereas only WD explained variation in BS. Stand density reduction may improve the development of stands without greatly affecting wood quality.     

Clues to wood quality and production from analyzing ring width and density variabilities of fertilized Pinus taeda trees

Tree growth and wood density are influenced by forest management. Nevertheless, few studies have evaluated their variability responses to fertilizer treatments at inter-annual, inter-tree and stand-production levels. Therefore, the annual ring width (RW) and density (RD) of sixty 17-year-old-Pinus taeda trees fertilized with six doses of composted pulp-mill sludge (CPMS) were analyzed. Ten trees for each treatment were felled and from which wood discs were taken at different trunk heights. The annual RW and RD were provided by X-ray microdensitometry, synchronized and the trunk basic specific gravity (SG_B) and biomass calculated. The effects of CPMS treatments were explored using interaction of variables RW and RD with cambial age, diameter, trunk SG_B and biomass production. Trees treated with CPMS grow faster, increasing their biomass (up to 108%), presenting lower wood density values (significant up to the 6th year) and reaching the mature wood later than untreated trees. Furthermore, the potential use of RW and RD in allometric equations showed good accuracy to predict trunk SG_B and biomass. Altogether, our results indicated that ring width and density revealed the impacts of fertilization treatment on wood quality and production. Our study also provides useful information for forest managers on the fertilization monitoring process.

     

Radial variation of wood density components and ring width in cork oak trees

The radial variation of ring width and wood density was studied in cork oaks (Quercus suber) using microdensitometry. The observations were made in young never debarked cork oaks (30–40 years of age) and in mature trees under cork production (37–60 years of age). The cork oak wood is very dense (mean ring density 0.86 g.cm^?3, between 0.79 g.cm^?3 and 0.97 g.cm^?3) with a small intra-ring variability (mean earlywood density 0.80 g.cm^?3 and latewood density 0.90 g.cm^?3). The density components decreased from pith to bark more rapidly until the 15th ring, and then only slightly. There were no significant differences in the mean density components between never debarked trees and trees under cork production but their outwards decrease was accentuated in the never debarked trees. The annual growth was high, with a ring width mean of 3.9 mm (4.2 mm in the first 30 years) and the latewood represented 57% of the annual growth.     

木材材性株内径向变异模式初探──Ⅲ.种植密度对湿地松、火炬松木材密度径向变异模式的影响

对两个地区不同种植密度的湿地松、火炬松进行了微密度分析，研究了种植密度对木材密度径向变异模式的影响。主要结果是：种植密度对湿地松和火炬松各密度特征值径向变异模式的影响，主要表现在变异曲线平均水平高低的变动，而对变异曲线形状的影响并不显著。种植密度对湿地松和火炬松各年轮宽特征值径向变异模式的影响，主要表现在年轮宽度RW和早材宽度EW变异曲线平均水平高低的变动和RW、EW与晚材宽度LW变异曲线形状的变动。种植密度对年轮密度RD的影响从年轮内宽度和年轮密度变异曲线平均水平高低两个方面起作用，出现较复杂的情况，并非所有情况下都是单调的正相关。     

Age trends in the genetic parameters of wood density and the relationship with growth rates in hybrid larch (Larix gmelinii var. japonica × L. kaempferi) F1

Age trends in variance components and heritability of overall wood density, earlywood and latewood density, and latewood proportion were investigated in 29-year-old trees of 19 full-sib families of hybrid larch (Larix gmelinii var. japonica × Larix kaempferi) F₁. The age–age correlation and optimum selection age for these traits were also estimated and genetic and phenotypic correlations between wood density and radial growth rate were calculated for each growth ring. Intraring wood density data were obtained using X-ray densitometry. The coefficient of additive genetic variance was stable over all ages, whereas the coefficient of environmental variances gradually decreased with increasing age, resulting in increases in heritability estimates with age for overall density. The latewood proportion had the highest heritability estimates at all ages, ranging from 0.44 to 0.66. Overall density and its various components at 28 years of age showed strong genetic correlations with their respective traits at all younger ages. Optimum selection ages for the wood density traits ranged from 8 to 14 years, at which point maximum gain efficiencies per year were obtained. There were negative correlations between wood density and radial growth rate at early ages, although these relationships tended to be weaker with increasing age. These results suggest that selection at a young age is effective for wood density, but particular care must be taken in selecting trees with an improved radial growth rate because rapid growth will result in a low-density wood product, especially in the early growth period.     

日本落叶松无性系木材性质的遗传变异

对10个10年生日本落叶松无性系的木材基本密度、管胞参数进行了测定.结果表明:木材基本密度,早、晚材管胞宽度和早材长宽比无性系间差异显著;木材基本密度,早、晚材管胞长度,早晚材管胞宽度和早晚材长宽比径向变异模式相似,即从髓心向外以曲线形式不断增加,有时亦有起伏;早材从髓心向外以近似直线的形式缓慢增加,晚材从髓心向外以曲线形式增加,初期增加幅度较大,到一定年龄后趋于水平变化并略有波动;材质性状与树木年轮间的关系以对数方程、幂函数方程、指数方程拟合效果较好;除了晚材壁腔比和早材壁厚外,其它木材性质的重复力均在0.5以上,受中度或中度以上的遗传制约,按照20%的选择率,长宽比和晚材管胞长能获得较高的遗传增益.     

The effects of within-species and between-species variation in wood density on the photodegradation depth profiles of sugi (Cryptomeria japonica) and hinoki (Chamaecyparis obtusa)

Low density wood is more rapidly eroded than denser wood when exposed to the weather, possibly because it is more susceptible to photodegradation. Fourier transform infrared microscopy was used to examine: (1) the depth of photodegradation in earlywood and latewood of sugi (Japanese cedar) and earlywood of hinoki (Japanese cypress) exposed for up to 1500 h to artificial sunlight emitted by a xenon lamp (375 W/m² within the 300 to 700 nm spectral range); and (2) the relationship between the density of wood tissues and depth of photodegradation. The depth of photodegradation varied between species (sugi and hinoki) as well as within a growth ring (sugi earlywood and latewood), and there was an inversely proportional relationship between depth of photodegradation and wood density. These findings may explain why low density earlywood is more rapidly eroded than latewood during weathering, and more generally, why there is an inverse relationship between the density of wood species and their rate of erosion during artificial and natural weathering. Part of this work was presented at the 54th Annual Meeting of the Japan Wood Research Society, Sapporo, August 2004     

Effect of growth on wood properties for Japanese larch (Larix kaempferi): Differences of annual ring structure between corewood and outerwood

To investigate the relations between growth and the wood properties of Japanese larch (Larix kaempferi), six sample trees of varied ages and radial growth were felled and the ring width, ring density, percentage of latewood, and some other factors were determined. There were significant differences in ring density and percentage of latewood between sample trees with vigorous growth and those with poor growth. In corewood the ring density decreased with increasing ring width for all sample trees, whereas in outerwood this trend did not appear. Moreover, the latewood width increased with the increment of ring width only in outerwood, whereas there was almost no change in the corewood. The variation in patterns of ring width, ring density, and percentage of latewood in the radial direction and the relation with height was also studied.Part of this report was presented at the 47th annual meeting of the Japan Wood Research Society, Kochi, April 1997     

Intra-increment variation in specific gravity of wood in blue pine

Summary Intra-increment variation in specific gravity of wood is studied in relation to the types of annual increments in Pinus wallichiana. In the normal annual increments specific gravity increases almost linearly across the ring, displaying minimum value in the first-formed earlywood and maximum value in the last-formed latewood. The occurrence of false rings and that of compression wood in an annual ring causes a localized increase in specific gravity. The change in specific gravity at the false growth ring boundary is slight and gradual, whereas at the true annual rings boundary the change is steep and abrupt. The specific gravity in the first-formed earlywood portion gives the most consistent value as compared to whole earlywood, whole latewood and whole ring when studied around the circumference.The financial support from University Grants Commission (India) is gratefully acknowledged     

Transverse swelling behavior of hinoki (Chamaecyparis obtusa) revealed by the replica method

Transverse swelling and its anisotropy in hinoki (Chamaecyparis obtusa) in several kinds of organic liquids and in water were investigated by means the replica method. There was more cross-sectional swelling of cell walls and cell wall thickness in earlywood than in latewood. Marked swelling toward cell lumens was observed in wood swollen in liquids that had higher swelling potentials than water. This suggests that the swelling of cell walls in these liquids is much greater than the external swelling. Feret's diameters of the cell lumens were reduced by swelling in all the observed cases except in the tangential direction of earlywood, suggesting that cell walls swell to a much less extent in width than in thickness. Deformation of cell shapes caused by the tensile force from the latewood were observed in the earlywood and in the transitional region from earlywood to latewood. When swollen in water, transverse swelling anisotropy caused only by the swelling in cell wall thickness were calculated to be 1.2 for the whole region over an annual ring and 1.4 for the earlywood. These values could not account for the external swelling anisotropy of 2.1. Considering obvious deformations of cell shapes in the earlywood and in the transitional region, we conclude that the interaction between earlywood and latewood is one of the prime factors contributing to the transverse swelling anisotropy of coniferous wood.Part of this report was presented at the 48th Annual Meeting of the Japan Wood Research Society, Nagoya, April 1998     

木材材性株内径向变异模式初探VI19个杉木种源木材密度径向变异模式的研究

以微密度分析对19个种源杉木的木材密度径向变异模式进行了研究.不同种源间和种源内株间,年轮平均密度的径向变异曲线都存在一定的变异,但此变异主要表现在种源内株间.年轮平均密度的幼龄-成熟相关性从第3年起就极显著.由微密度分析得出的一系列密度和年轮宽特征值间的相关分析表明,在年龄影响下的变异过程中,年轮内密度变异曲线随年轮宽的变动导致晚材率变动的效应较为显著,年轮平均密度主要受晚材率影响;年轮平均密度与年轮宽呈特别显著的负相关.而在种源影响下的变异过程中分析,上述效应不明显,而不同种源间密度变异曲线的上下移动影响显著;年轮平均密度主要受早材平均密度影响;年轮平均密度与年轮宽的负相关远不如在年龄影响下的变异过程中显著.