Aboveground biomass equations for individual trees of <Emphasis Type="Italic">Cryptomeria japonica</Emphasis>, <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> and <Emphasis Type="Italic">Larix kaempferi</Emphasis> in Japan

Generic equations are proposed for stem, branch and foliage biomass of individual trees in even-aged pure stands of Cryptomeria japonica, Chamaecyparis obtusa and Larix kaempferi. Biomass data was collected from a total of 1,016 individual trees from 247 stands throughout Japan, and five regression models were assessed by root mean square error, mean bias, fit index (FI), and AIC. The results show that a power equation using diameter at breast height (dbh) and height is the most suitable for all species and components. This equation is more accurate than the familiar power equation that uses ‘dbh² height’, and it expresses the greater volume of branch and foliage mass of trees with a lower height/diameter ratio. A power equation using dbh is more reasonable for models with dbh as the only independent variable and more accurate than a power equation using ‘dbh² height’ for estimating branch and foliage mass. Estimating error for branch and foliage mass is larger than that for stem mass, but the entire aboveground biomass can be estimated with an error of less than 19%, except in the case of small trees with dbh less than 10 cm.     

Early establishment of broadleaved trees after logging of <Emphasis Type="Italic">Cryptomeria japonica</Emphasis> and <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> plantations with different understory treatments

We studied the effects of the amount of advanced regeneration before logging and different understory treatments on forest recovery, particularly the establishment of lucidophyllous (evergreen broadleaved) species, following the logging of conifer plantation with a focus on the sprouting ability. The establishment of lucidophyllous tree and shrub species originating from advanced regeneration was closely related to the total amount of these elements in the advanced regeneration, regardless of understory treatment. The understory-left treatment could preserve understory as surviving individuals by high proportion (60% or more of the understory) compared with the understory-cleared practice after logging. However, half of the surviving individuals were damaged to some extent by logging and skidding. Relatively large trees were likely to survive with no damage, indicating that they face a lower risk than smaller trees. In understory-cleared stands, a high proportion (60% or more) of the understory regenerated by resprouting. However, the resprouting ratio depended on tree size and species. Therefore, as well as the amount of the understory, the tree size of understory before logging would be also an important factor for early forest recovery. Further, the infrequent (low-density) species could easily disappear after logging because of their low resprouting ratio and low density. Thus, recovery from resprouting alone would risk simplification of the species composition after logging. We concluded that leaving the developed understory intact before logging can enhance the speed and biodiversity of forest recovery.     

Estimation of stand attributes in <Emphasis Type="Italic">Cryptomeria japonica</Emphasis> and <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> stands using QuickBird panchromatic data

This study aims to estimate stand density and stand volume in Cryptomeria japonica and Chamaecyparis obtusa stands from high-resolution satellite data and verify the reliability and uncertainty of the data. Sixty circular sample plots of 0.04 ha each were established. Their stand densities were estimated from the number of tree crowns derived from high-resolution satellite data using the watershed method. Stand densities derived from field surveys in the sample plots were compared with those obtained from high-resolution satellite data by stand age class. As a result, there was a positive correlation between them for sample plots of 41 years of age and over (R = 0.82); however, there was no correlation between them for sample plots of 40 years and under. Individual diameters at breast height (DBH) were estimated from crown areas obtained from high-resolution satellite data for the two species. Using the estimated DBH, individual tree heights were predicted from the height–diameter curves. Stand volumes were estimated from the sum of individual volumes, which were derived from volume formulas having two variables, i.e., DBH and height. Stand volumes derived from the field survey were compared with those obtained from high-resolution satellite data. The correlation coefficient between them for stands of 41 years of age and over was 0.78.     

Fine root biomass and morphology of <Emphasis Type="Italic">Pinus densiflora</Emphasis> under competitive stress by <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis>

The fine root (diameter ≤2.0 mm) biomass and morphology of Japanese red pines (Pinus densiflora) grown under different aboveground conditions (i.e., high and low competitive environments) were examined in a pine–cypress mixed forest. All P. densiflora subject trees were about 40 years old, and the aboveground condition (i.e., size) of red pines appeared to be influenced by the surrounding Japanese cypress (Chamaecyparis obtusa). Smaller P. densiflora exhibited lower fine root biomasses, shorter root lengths, and lower root tip densities, but longer specific root lengths and higher specific root tip densities relative to larger pines. These results suggest that P. densiflora may adjust the morphological traits of fine roots to the different conditions in biomass allocation to fine roots of individuals with different aboveground growth.     

Physiological effects of touching hinoki cypress (<Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis>)

This study aimed to clarify the physiological effects of touching hinoki cypress (hereinafter called “hinoki”) (Chamaecyparis obtusa) wood with the palm of the right hand on brain activity and autonomic nervous activity. Twenty-two female university students (mean age 21.1?±?0.2 years) participated in the study. As an indicator of brain activity, oxyhemoglobin (oxy-Hb) concentrations were measured in the left/right prefrontal cortex using near-infrared time-resolved spectroscopy. Heart rate variability (HRV) was used as an indicator of autonomic nervous activity. The high-frequency (HF) component of HRV, which reflected parasympathetic nervous activity, and the low-frequency (LF)/HF ratio, which reflected sympathetic nervous activity, were measured. Plate (300?×?300 mm) of uncoated hinoki was used as tactile stimulation. Marble was used as a control material. After sitting at rest with their eyes closed, the participants touched the materials for 90 s with their eyes still closed. The results showed that tactile stimulation with hinoki significantly decreased oxy-Hb concentration in the left prefrontal cortex and increased ln(HF) reflected parasympathetic nervous activity compared with marble. In conclusion, our study showed that touching hinoki wood with the palm calms prefrontal cortex activity and increases parasympathetic nervous activity, thereby inducing physiological relaxation.     

Structural unit of xylans from sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) and hinoki (<Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis>)

Arabinoglucuronoxylans (AGXs) isolated from the holocellulose of sugi (Cryptomeria japonica) and hinoki (Chamaecyparis obtusa) contained one 4-O-methyl-d-glucopyranosyluronic acid (4-O-Me-d-GlcAp) residue per 6.2 d-xylopyranose (d-Xylp) residues and one 4-O-Me-d-GlcAp residue per 3.8 d-Xylp residues. These AGXs were subjected to partial acid hydrolysis. Analyses by size exclusion chromatography and electrospray-ionization mass spectroscopy of the neutral sugar fractions in the hydrolysates showed the presence of xylooligosaccharides having a degree of polymerization of 2-8 in addition to d-Xyl, suggesting that the AGXs from sugi and hinoki contained unsubstituted chains consisting of at least eight d-Xyl residues. The acidic sugars in the hydrolysates were separated into two series of aldouronic acids composed of 4-O-Me-d-GlcAp and d-Xylp by ion-exchange chromatography. The first series included aldouronic acids from aldobiouronic acid (4-O-Me-d-GlcAp-Xyl) to aldopentaouronic acids (4-O-Me-d-GlcAp-Xyl₄). The second series were aldouronic acids composed of two 4-O-Me-d-GlcAp residues and 2-4 d-Xyl residues. In these acidic sugars, the uronic acid side chains were located on two contiguous d-Xyl residues. These facts indicated that AGXs from sugi and hinoki had a structural unit containing two 4-O-Me-d-GlcAp residues on two contiguous d-Xyl residues as well as AGXs from spruce and larch.     

Delignification of cell walls of <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> during alkaline nitrobenzene oxidation

To clarify the behavior of whole lignins in wood cell walls during alkaline nitrobenzene oxidation, the delignification process from cell walls in normal and compression woods of Chamaecyparis obtusa Endl. (Cupressaceae) was observed using ultraviolet and transmission electron microscopies. The lignin content conspicuously decreased to around 10% after 35min in normal wood. The lignin content in compression wood finally leveled off at aroumd 10% after 50min. In gel filtration of oxidation products in ethyl acetate, a high molecular weight fraction was prominent in extracts from the early stage of the reaction. As the oxidation progressed, the high molecular weight fraction became less prominent in both normal and compression wood. Changes in the weights of cell wall residues during reaction indicated that approximately half of the components other than lignin were also removed from the cell walls. This shows that the majority of lignin with relatively high molecular weight is removed from the cell walls together with polysaccharides in the early stage of the reaction and that further oxidative degradation occurs in solution in later stages. Only a small amount of the lignin with low molecular weight could be analyzed by gas chromatography.Parts of this report were presented at the 47th (Kochi, April 1997) and 48th (Shizuoka, April 1998) Annual Meetings of the Japan Wood Research Society, and at the Lignin Symposium, Sapporo, October 1997     

Modelling stemflow production by juvenile lodgepole pine (<Emphasis Type="Italic">Pinus contorta</Emphasis> var. <Emphasis Type="Italic">latifolia</Emphasis>) trees

Stemflow is a focused point source input of precipitation and nutrients at the base of a tree or plant and can have a significant impact on site hydrology. To date, no known studies have modelled stemflow production for juvenile lodgepole pine (Pinus contorta var. latifolia). Meteorological conditions, tree characteristics, and stemflow were sampled for two juvenile lodgepole pine stands over the course of the 2009 growing season. Step-wise multiple regression was used to assess which meteorological and tree architecture variables influenced stemflow production for each research plot. Once predictor variables were identified, models were produced for each stand and a generic model was produced that applied to both plots. A model employing precipitation depth and crown projection area successfully explained 71.3% of the variation in stemflow production from sampled trees. Stemflow was found to represent 1.8% of the study period rainfall and, although not a large component of the plot-scale canopy water balance, it is an order of magnitude greater than the fractioning of stemflow from mature lodgepole and lodgepole pine dominated forest. Additionally, stemflow funnelling ratios were found to average 22.2 and 24.3 from the two sample plots over the study period with a single tree, single event maximum of 111.7 recorded for a tree with a 3.3 cm bole diameter and a rain depth of 17.4 mm.     

Allometric model of the Reineke equation for Japanese cypress (<Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis>) and red pine (<Emphasis Type="Italic">Pinus densiflora</Emphasis>) stands

An allometric model that explains the mechanism of the difference in the slope of the Reineke equation (A) among species was proposed based on the allometric relationships of mean tree height (H) to quadratic mean diameter D (H ∝ D ^θ ) and stand density N (H ∝ N ^δ ), i.e., A = θ/δ. The proposed model was fitted to Japanese cypress (Chamaecyparis obtusa Endl.) and red pine (Pinus densiflora) stands. The allometric exponents θ and δ were, respectively, 0.8995 and −0.5000 for cypress and 0.8612 and −0.6619 for pine. The difference between cypress and pine was significant for δ but not for θ. Inserting the exponents into the model resulted in predicted slopes of −1.7991 for cypress and −1.3011 for pine. The difference in the slope of the Reineke equation between the two species was produced by characteristics related to the tree crown, rather than characteristics related to stem slenderness. The proposed model enables us to estimate the slope of the Reineke equation from commonly measured stand attributes, such as mean tree height and quadratic mean diameter. Therefore, the proposed model is expected to be practical and convenient for estimating the slope of the Reineke equation and for explaining the mechanism of its variation among species. The model should be also accepted as a generalized model of the stand density versus quadratic mean diameter relationship, whereas the original Reineke equation should be seen as a specific case of this model.     

Germination and seedling growth of <Emphasis Type="Italic">Dimorphandra jorgei</Emphasis> MF Silva and <Emphasis Type="Italic">Swartzia macrostachya</Emphasis> Benth. var. <Emphasis Type="Italic">riedelii</Emphasis> Cowan

Dimorphandra jorgei MF Silva (Caesalpinaceae) and Swartzia macrostachya Benth. var. riedelii Cowan (Fabaceae) are tree species from the southern Bahian Atlantic Forest, identified for the restoration of degraded areas. The objective of this research is to study their seed germination and seedling growth to develop simple methods for seedling production in small scale nurseries. Because the species have distinct dormancy and germination characteristics, the seeds were submitted to different treatments. D. jorgei seeds were immersed in hot water, scarified and stored for 12 weeks in the laboratory environment (25°C). S. macrostachya seeds were submitted to different combinations of drying and storage in the laboratory environment or refrigerator (4°C). Seedlings were submitted to two light treatments for 3 months: partial shade (52% of full sun) and full shade (12% of full sun). In D. jorgei, the highest germination occurred for scarified seeds (87%) and for seeds stored for 12 weeks and then scarified (69%). In S. macrostachya the undried control seeds had the highest germination, followed by that of the refrigeration storage treatment, without predrying (99% and 97%, respectively). The average values for the growth parameters were greater in full shade for D. jorgei, while S. macrostachya seedlings showed greater growth rates in partial shade. Two months growth is recommended before D. jorgei seedlings are of the sufficient size and leaf number for field planting. On the other hand, a period of 4 months is recommended for S. macrostachya, due to its relatively slow growth.     

Relationships of stem surface area to other stem dimensions for Japanese cedar (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis> D. Don) and Japanese cypress (<Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> Endl.) trees

I investigated the relationships between stem surface area outside bark and other stem dimensions for Japanese cedar (Cryptomeria japonica D. Don) and Japanese cypress (Chamaecyparis obtusa Endl.) trees. The stem dimensions used here were the basal area and the product of diameter at breast height (dbh) and total tree height. The regression equation of the stem surface area s against basal area g was s = 184.216g for the cedar trees and s = 156.878g for the cypress trees. The slope of the equation was significantly different between the two species. For the same dbh, the cedar trees tended to have a higher total tree height than the cypress trees. The cedar trees also had a larger surface area of relative stem form than the cypress trees. These results indicated that the difference in the slope was produced by the differences in both the stem slenderness and tapering between the two species. On the other hand, the regression equation between the stem surface area and the product of dbh and total tree height dh was s = 1.937dh for the cedar trees and s = 1.921dh for the cypress trees, whereas no significant difference in the slope was found. The obtained slopes for the cedar and cypress trees seemed to be in accord with that for other coniferous species reported in earlier studies, suggesting that the variation in the slope among coniferous species would be small. The estimation from the basal area would provide a simpler means for estimating the stem surface area and would be useful in obtaining an approximation of the surface area. By contrast, the estimation from the product of dbh and total tree height would provide a more accurate and precise estimate as well as a wider applicable range, i.e., a parameter for physiological growth models. In conclusion, it could not be judged which regression equation examined in the present study was superior to the other, and thus it was important to select an appropriate equation depending both on the purpose and on the time and labor available.     

Fertility variation in endemic populations of Ehrami black pine (<Emphasis Type="Italic">Pinus nigra</Emphasis> Arnold. subsp. <Emphasis Type="Italic">pallasiana</Emphasis> var. <Emphasis Type="Italic">pyramidata</Emphasis>)

Fertility variation and effective number of parents were estimated in the 100 individuals from each of three plantation populations (P1, P2 and P3) of the endangered Pinus nigra. subsp. pallasiana var. pyramidata established in the Isparta–Golcuk district in southern Turkey in 1990. Potential relations between cone yield and growth characters (height, diameter at breast height, diameter at base and crown diameter) were also investigated. Large differences were found among populations and within populations for cone production and growth characters. Mean cone production was eight (ranging from 6.5 in P2 to 9.1 in P1) for the three populations. The 10 most productive individuals for cones produced 32% of the total cones in P1, 39% in P2 and 34% in P3; 21, 16 and 6 individuals, respectively did not produce any cones in the populations. According to the correlation analyses, the relation between cone yield and growth characters changed for the populations, while height, diameter at breast height and crown diameter were positively significantly correlated (r = 0.182, 0.135 and 0.209; p ≤ 0.05) with cone production for the three populations. Fertility variation was 1.81 in total of three populations, ranging from 1.72 in P3 to 3.45 in P1). Effective number of parents was 142 (55.2 of number of parents censused; 29%, P1; 49.8%, P2; 58.3%, P3).     

Successful <Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of <Emphasis Type="Italic">Populus tomentosa</Emphasis> with apple <Emphasis Type="Italic">SPDS</Emphasis> gene

The problem of salinized soils has become one of the most serious constraints to agricultural and forest productivity. With the purpose of enhancing salt stress tolerance of Populus tomentosa, we transformed this tree species with spermidine synthase （SPDS） genes derived from an apple by an Agrobacterium-mediated method. Four transgenic clones were confu＇med by PCR and Southern blot analysis. As well, the expression of introduced SPDS genes was analyzed by real-time quantitative PCR.     

Shoot multiplication of <Emphasis Type="Italic">Syringa reticulata</Emphasis> var. <Emphasis Type="Italic">mandshurica</Emphasis> from in vitro cultured seedlings

We developed a shoot multiplication protocol for Syringa reticulata Blume var. mandshurica Hara from in vitro cultured seedlings that derived from in vitro germinated seeds. The shoots could be induced on Murashige and Skoog (MS) medium with proper plant growth regulator combinations of 6-benzylaminopurine (BA) and indole-3-butyric acid (IBA). The better medium for shoot multiplication and growth was MS + 5 mg L^?1 BA + 0.5 mg L^?1 IBA + 20 g L^?1 sucrose + 7 g L^?1 agar, and the corresponding shoot induction rate was 75 %. The plantlets grew well after rooting on 1/2MS medium (macro-elements of MS medium are at half-strength) supplemented with 1 mg L^?1 IBA, and the survival percentage was >80 % at 16 weeks after transplanting.     

Morphological characteristics of <Emphasis Type="Italic">Quercus</Emphasis><Emphasis Type="Italic">variabilis</Emphasis> charcoal prepared at different temperatures

The morphology of charcoals was investigated by scanning electron microscopy. Charcoal of Quercus variabilis was prepared in an electric furnace under nitrogen gas atmosphere at 400, 600, 800 and 1,000°C. Charring temperature greatly affects the structure of charcoal. In charcoal prepared at 400°C, most of the morphological characteristics remained relatively unchanged with the exception of the cell-wall layering. The cell walls appeared homogenous and glass-like. Above 400°C, there was an increase in cell-wall thinning and volumetric shrinkage with an increase in the charring temperature. These two factors were responsible for most of the observed changes in structure. Fracture surfaces became increasingly rough and disrupted. Vessel elements were increasingly distorted and tyloses disintegrated with increases in temperature. Parenchyma cells exhibited greater shrinkage except at the pits. This resulted in the appearance of distinctive small protuberances over the surface of the parenchyma cells. Rhomboidal calcium crystals were found to be abundant at all the temperatures studied, but at 800 and 1,000°C the crystals had a sponge-like appearance.     

Root architecture might account for contrasting establishment success of <Emphasis Type="Italic">Pseudotsuga menziesii</Emphasis> var. <Emphasis Type="Italic">menziesii</Emphasis> and <Emphasis Type="Italic">Pinus sylvestris</Emphasis> in Central Europe under dry conditions

Key message

Pinus sylvestris seedlings quickly expand their roots to deeper soil layers while Pseudotsuga menziesii concentrates its root system in the topsoil, thereby running the risk of desiccation during long dry spells, as indicated by lower survival after simulated summer drought.

Context

Pseudotsuga menziesii (Douglas-fir) is regarded as a promising species to maintain the productivity of Central European lowland forests given the projected increase of long dry spells.

Aims

Will the species be able to regenerate from seed and spread outside plantations in a drier temperate Europe?

Methods

We measured the relative growth rate, biomass allocation, root architecture, and phenotypic plasticity of Pseudotsuga menziesii seedlings sown in a common garden and grown under current precipitation and prolonged drought, respectively. The species’ competitive ability with respect to Pinus sylvestris L., the most drought-tolerant native conifer in Central Europe, was assessed during three growing seasons.

Results

Pinus sylvestris seedlings had higher relative growth rates than did Pseudotsuga menziesii seedlings, first in terms of aboveground biomass and later in terms of shoot height. This resulted in heavier and taller seedlings after three growing seasons under both moist and dry conditions. Shorter vertical roots corresponded with lower survival of Pseudotsuga menziesii seedlings under dry conditions.

Conclusion

Fast root proliferation allows Pinus sylvestris seedlings to reach deeper water pools that are less rapidly depleted during transient drought. By contrast, the shallow root system might put Pseudotsuga menziesii seedlings at the risk of desiccation during prolonged dry spells.

     

Experimental study on characteristic curves of restoring forces of <Emphasis Type="Italic">Populus alba</Emphasis> var. <Emphasis Type="Italic">pyramidalis</Emphasis>

Static tests under cyclic loading were carried out on Populus alba var. pyramidalis to determine its characteristic curves of     

Insecticidal properties of <Emphasis Type="Italic">Thymus persicus</Emphasis> essential oil against <Emphasis Type="Italic">Tribolium castaneum</Emphasis> and <Emphasis Type="Italic">Sitophilus oryzae</Emphasis>

Red flour beetle Tribolium castaneum (Herbst) and rice weevil Sitophilus oryzae (L.) are considered to be the major insect pests in storage. Essential oils from aromatic plants are recognized as proper alternatives to fumigants. Thymus persicus (Ronniger ex Rech. f.) is one of these plants that have medicinal properties and is indigenous to Iran. The essential oil was obtained from aerial parts of the plant and analyzed by GC and GC–MS. Carvacrol (44.69%) and thymol (11.05%) were the major constituents of the oil extracted. In this experiment, fumigant toxicity of the essential oil was studied against T. castaneum, S. oryzae at 27 ± 1°C and 60 ± 5% RH in dark condition. The adult insects were exposed to the concentrations of 51.9, 111.1, 207.4 and 370.4 μl/l air to estimate median lethal time (LT₅₀) values. The fumigant toxicity was increased in response to increased essential oil concentrations. The LT₅₀ values at the lowest and the highest concentrations tested were ranged from 28.09 to 13.47 h for T. castaneum, and 3.86 to 2.30 h for S. oryzae. It was found that S. oryzae adults were much more susceptible to the oil than T. castaneum. After 24 h of exposure, the LC₅₀ values (95% fiducial limit) for T. castaneum and S. oryzae were estimated to be 236.9 (186.27–292.81) and 3.34 (2.62–4.28) μl/l air, respectively. These results suggest that T. persicus essential oil merits further study as potential fumigant for the management of these stored-product insects.     

Recessive inheritance of morphological characteristics of utsukushimatsu,<Emphasis Type="Italic">Pinus densiflora</Emphasis> f.<Emphasis Type="Italic">umbraculifera</Emphasis>

Pinus densiflora f.umbraculifera, commonly known as utsukushimatsu, is a distinctively shaped form of Japanese red pine whose growth is restricted to a forest stand in Shiga Prefecture, Japan. The inheritance mode of morphological characteristics of utsukushimatsu was studied to preserve the genetic resource of this pine. As previously reported, F₁ trees grown from open-pollinated seeds harvested from trees inhabiting the native stand showed two phenotypes: one resembling utsukushimatsu, which produces multiple trunks, and the other resembling normalP. densiflora, which produces one or a few trunks. In the present study, controlled pollination was carried out using F₁ and normalP. densiflora trees. Segregation ratios of the two phenotypes observed in the F₂ population showed that the morphological characteristics of utsukushimatsu are inherited recessively. This suggests that the mutation of one gene or a few closely linked genes controls the morphological characteristics of utsukushimatsu. Since multiple trunk formation of utsukushimatsu might be related to a loss of lateral bud inhibition, it follows that a simple gene mutation breaks apical dominance inP. densiflora.     

Radial variations of wood properties of an endangered species, <Emphasis Type="Italic">Pinus armandii</Emphasis> var. <Emphasis Type="Italic">amamiana</Emphasis>

A dead tree of Pinus armandii Franch. var. amamiana (Koidz.) Hatusima (abbreviated to PAAm) was obtained from a natural habitat on Tanega-shima Island and various properties of its wood were investigated. Grain angle was measured and soft X-ray analysis was undertaken to obtain the density in each annual ring. Unit shrinkage and dynamic properties were measured by shrinkage, bending, and compression tests. Variations of wood properties in the radial direction, relationships of wood properties to density, and annual ring width were examined. Roughly speaking, variations in the radial direction of the grain angle, twist angle by drying, Young’s modulus and strength in static bending, absorbed energy in impact bending, compressive Young’s modulus, compressive strength, and compressive proportional limit corresponded to the variation of annual ring width. As a result, it was determined that if PAAm is afforested artificially for the purposes of lumber production and conservation, the annual rings of logs should not be too widely spaced. Wood properties of PAAm were similar to those of Japanese black pine (Pinus thunbergii Parl.), which is another representative pine on Tanegashima Island. This study was presented in part at the 56th Annual Meeting of the Japan Wood Research Society, Hiroshima, August 2007