Quantitative trait loci analysis for growth and carcass traits in a Meishan x Duroc F2 resource population

We constructed a pig F2 resource population by crossing a Meishan sow and a Duroc boar to locate economically important trait loci. The F2 generation was composed of 865 animals (450 males and 415 females) from four F1 males and 24 F1 females and was genotyped for 180 informative microsatellite markers spanning 2,263.6 cM of the whole pig genome. Results of the genome scan showed evidence for significant quantitative trait loci (<1% genomewise error rate) affecting weight at 30 d and average daily gain on Sus scrofa chromosome (SSC) 6, carcass yield on SSC 7, backfat thickness on SSC 7 and SSC X, vertebra number on SSC 1 and SSC 7, loin muscle area on SSC 1 and SSC 7, moisture on SSC 13, intramuscular fat content on SSC 7, and testicular weight on SSC 3 and SSC X. Moreover, 5% genomewise significant QTL were found for birth weight on SSC 7, average daily gain on SSC 4, carcass length on SSC 6, SSC 7, and SSC X and lightness (L value) on SSC 3. We identified 38 QTL for 28 traits at the 5% genomewise level. Of the 38 QTL, 24 QTL for 17 traits were significant at the 1% genomewise level. Analysis of marker genotypes supported the breed of origin results and provided further evidence that a suggestive QTL for circumference of cannon bone also was segregating within the Meishan parent. We identified genomic regions related with growth and meat quality traits. Fine mapping will be required for their application in introgression programs and gene cloning.     

Search for quantitative trait loci affecting growth and carcass traits in a cross population of beef and dairy cattle

A genome scan to detect QTL influencing growth and carcass-related traits was conducted in a Charolais x Holstein crossbred cattle population. Phenotypic measurements related to growth and carcass traits were made on the 235 second-generation crossbred males of this herd (F2 and reciprocal backcrosses), which were born in 4 consecutive annual cohorts. Traits measured in vivo were related to birth dimensions, growth rates, and ultrasound measurements of fat and muscle depth. The animals were slaughtered near a target BW of 550 kg, and a wide range of postmortem traits were measured: visual assessment of carcass conformation and carcass fatness, estimated subcutaneous fat percentage, weights of kidney knob and channel fat, and weights of carcass components after commercial and full-tissue dissections. The whole population, including grandparents, parents, and the crossbred bulls, was genotyped initially for 139 genome-wide microsatellite markers. Twenty-six additional markers were subsequently analyzed to increase marker density on some of the chromosomes where QTL had been initially identified. The linear regression analyses based on the 165 markers revealed a total of 51 significant QTL at the suggestive level, 21 of which were highly significant (F-value >or=9; based on the genome-wide thresholds obtained in the initial scan). A large proportion of the highly significant associations were found on chromosomes 5 and 6. The most highly significant QTL was localized between markers DIK1054 and DIK082 on chromosome 6 and explained about 20% of the phenotypic variance for the total bone proportion estimated after the commercial dissection. In the adjacent marker interval on this chromosome, 2 other highly significant QTL were found that explain about 30% of the phenotypic variance for birth dimension traits (BW and body length at birth). On chromosome 5, the most significant association influenced the lean:bone ratio at the forerib joint and was flanked by markers DIK4782 and BR2936. Other highly significant associations were detected on chromosomes 10 (estimated subcutaneous fat percentage), 11 (total saleable meat proportion), 16 (prehousing growth rate), and 22 (bone proportion at the leg joint). These results provide a useful starting point for the identification of the genes associated with traits of direct interest to the beef industry, using fine mapping or positional candidate gene approaches.     

Identification of carcass and meat quality quantitative trait loci in a Landrace pig population selected for growth and leanness

The identification of QTL related to production traits that are relevant for the pig industry has been mostly performed by using divergent crosses. The main objective of the current study was to investigate whether these growth, fatness, and meat quality QTL, previously described in diverse experimental populations, were segregating in a Landrace commercial population selected for litter size, backfat thickness, and growth performance. We have found QTL for carcass weight (posterior P > 0.75), cutlet weight (posterior P > 0.99), weight of ham (posterior P > 0.75), shoulders weight (posterior probability > 0.99), and shear firm-ness (posterior P > 0.99) on pig Chromosome 2. Moreover, QTL with posterior P > 0.75 for fat thickness between the 3rd and 4th ribs (Chromosome 7), rib weights (Chromosome 8), backfat thickness (Chromosomes 8, 9, and 10), and b Minolta color component (Chromosome 7) were identified. These results indicate that commercial purebred populations retain a significant amount of genetic variation, even for traits that have been selected for many generations.     

Identification of quantitative trait loci for carcass composition and pork quality traits in a commercial finishing cross

A QTL study for carcass composition and meat quality traits was conducted on finisher pigs of a cross between a synthetic Piétrain/Large White boar line and a commercial sow cross. The mapping population comprised 715 individuals evaluated for a total of 30 traits related to growth and fatness (4 traits), carcass composition (11 traits), and meat quality (15 traits). Offspring of 8 sires (n = 715) were used for linkage analysis and genotyped for 73 microsatellite markers covering 14 chromosomal regions representing approximately 50% of the pig genome. The regions examined were selected based on previous studies suggesting the presence of QTL affecting carcass composition or meat quality traits. Thirty-two QTL exceeding the 5% chromosome-wise significance level were identified. Among these, 5 QTL affecting 5 different traits were significant at the 1% chromosome-wise level. The greatest significance levels were found for a QTL affecting loin weight on SSC11 and a QTL with an effect on the Japanese color scale score of the loin on SSC4. About one-third of the identified QTL were in agreement with QTL previously reported. Results showed that QTL affecting carcass composition and meat quality traits segregated within commercial lines. Use of these results for marker-assisted selection offers opportunities for improving pork quality by within-line selection.     

Genome-wide mapping and identification of new quantitative trait loci affecting meat production, meat quality, and carcass traits within a Duroc purebred population

Most QTL detection studies in pigs have been carried out in experimental F(2) populations. However, segregation of a QTL must be confirmed within a purebred population for successful implementation of marker-assisted selection. Previously, QTL for meat quality and carcass traits were detected on SSC 7 in a Duroc purebred population. The objectives of the present study were to carry out a whole-genome QTL analysis (except for SSC 7) for meat production, meat quality, and carcass traits and to confirm the presence of segregating QTL in a Duroc purebred population. One thousand and four Duroc pigs were studied from base to seventh generation; the pigs comprised 1 closed population of a complex multigenerational pedigree such that all individuals were related. The pigs were evaluated for 6 growth traits, 7 body size traits, 8 carcass traits, 2 physiological traits, and 11 meat quality traits, and the number of pigs with phenotypes ranged from 421 to 953. A total of 119 markers were genotyped and then used for QTL analysis. We utilized a pedigree-based, multipoint variance components approach to test for linkage between QTL and the phenotypic values using a maximum likelihood method; the logarithm of odds score and QTL genotypic heritability were estimated. A total of 42 QTL with suggestive linkages and 3 QTL with significant linkages for 26 traits were detected. These included selection traits such as daily BW gain, backfat thickness, loin eye muscle area, and intramuscular fat content as well as correlated traits such as body size and meat quality traits. The present study disclosed QTL affecting growth, body size, and carcass, physiological, and meat quality traits in a Duroc purebred population.     

Characterization of quantitative trait loci for growth and meat quality in a cross between commercial breeds of swine

A three-generation resource family was created by crossing two Berkshire grandsires with nine Yorkshire granddams to identify QTL affecting growth, body composition, and meat quality. A total of 512 F2 offspring were evaluated for 11 traits related to growth and body composition and 28 traits related to meat quality. All animals were initially genotyped for 125 markers across the genome. The objectives of this advanced phase of the project were to further identify and characterize QTL after genotyping for another 33 markers in special regions of interest, and to develop and apply methods for detecting QTL with parent-of-origin effects. New marker linkage maps were derived and used in QTL analysis based on line-cross least squares regression-interval mapping. A decision tree for identifying QTL with parent-of-origin effects was developed based on tests against the Mendelian mode of expression. Empirical significance thresholds were derived at chromosomewise and genomewise levels using specialized permutation strategies to create data under the null hypothesis appropriate for each test. Significance thresholds derived by the permutation tests were validated based on simulation of a pedigree and data structure similar to the Berkshire-Yorkshire population. The addition of 33 markers resulted in the discovery of 29 new QTL at the 5% chromosomewise level using the Mendelian model of analysis. Thirteen of the original QTL were no longer significant at the 5% chromosomewise level. A total of 33 QTL with parent-of-origin effects were identified, including QTL with paternal expression for backfat and loin muscle area on chromosome 2, near IGF2, and QTL with maternal expression for drip loss and reflectance on chromosome 9. Tests for imprinting against Mendelian expression identified much fewer QTL with parent-of-origin effects than tests based on significance of paternal and maternal alleles, which have been used in other studies. The detected QTL and their identified mode of expression will allow further research in these QTL regions and their utilization in marker-assisted improvement of meat quality.     

Quantitative trait loci analysis on Sus scrofa chromosome 7 for meat production, meat quality, and carcass traits within a Duroc purebred population

Many QTL analyses related to meat production and meat quality traits have been carried out using an F(2) resource population produced by crossing 2 genetically different breeds. This experiment was intended to investigate whether these QTL were segregating in a purebred Duroc population that had been selected for meat production and meat quality traits during 7 generations. Sus scrofa chromosome 7, for which significant QTL of intramuscular fat and many other traits have already been reported, was studied. The polymorphism of 10 microsatellite markers that were arranged at about 20-cM intervals was investigated on 1,004 pigs. In the selected population, 954 progeny were produced from mating of 99 sires and 286 dams. The QTL analysis for a full-sib family population was examined with the multigeneration pedigree structure of the population. Variance component analysis was used to detect QTL in this population and was examined for the multigeneration pedigree population. In this study, multigenerational pedigree estimated identical by descent coefficients among sibs were produced using Markov chain Monte Carlo methods. The maximum likelihood of odds score was found at the 70-cM position for the LM area, at the 0-cM position for the pork color standard, and at the 120-cM position for the number of thoracic vertebra, but no significant QTL for intramuscular fat were detected on SSC 7. These results indicate that QTL analysis via a variance component method within a purebred population was effective to determine that QTL were segregating in a population of purebred Durocs.     

Quantitative trait loci analysis for growth and carcass traits in a half-sib family of purebred Japanese Black (Wagyu) cattle

We used a half-sib family of purebred Japanese Black (Wagyu) cattle to locate economically important quantitative trait loci. The family was composed of 348 fattened steers, 236 of which were genotyped for 342 microsatellite markers spanning 2,664 cM of 29 bovine autosomes. The genome scan revealed evidence of 15 significant QTL (<5% chromosome-wise level) affecting growth and carcass traits. Of the 15 QTL, six QTL were significant at the 5% experiment-wise level and were located in bovine chromosomes (BTA) 4, 5, and 14. We analyzed these three chromosomes in more detail in the 348 steers, with an average marker interval of 1.2 cM. The second scan revealed that the same haplotype of the BTA 4 region (52 to 67 cM) positively affected LM area and marbling. We confirmed the QTL for carcass yield estimate on BTA 5 in the region of 45 to 54 cM. Five growth-related QTL located on BTA 14, including slaughter and carcass weights, were positively affected by the same region of the haplotype of BTA 14 (29-51 cM). These data should provide a useful reference for further marker-assisted selection in the family and positional cloning research. The research indicates that progeny design with moderate genotyping efforts is a powerful method for detecting QTL in a purebred half-sib family.     

Mapping of quantitative trait loci for growth and carcass traits in commercial sheep populations

Quantitative trait loci analyses were applied to data from Suffolk and Texel commercial sheep flocks in the United Kingdom. The populations comprised 489 Suffolk animals in three half-sib families and 903 Texel animals in nine half-sib families. Phenotypic data comprised measurements of live weight at 8 and 20 wk of age and ultrasonically measured fat and muscle depth at 20 wk. Lambs and their sires were genotyped across candidate regions on chromosomes 1, 2, 3, 4, 5, 6, 11, 18, and 20. Data were analyzed at the breed level, at the family level, and across extended families when families were genetically related. The breed-level analyses revealed a suggestive QTL on chromosome 1 in the Suffolk breed, between markers BM8246 and McM130, affecting muscle depth, although the effect was only significant in one of the three Suffolk families. A two-QTL analysis suggested that this effect may be due to two adjacent QTL acting in coupling. In total, 24 suggestive QTL were identified from individual family analyses. The most significant QTL affected fat depth and was segregating in a Texel family on chromosome 2, with an effect of 0.62 mm. The QTL was located around marker ILSTS030, 26 cM distal to myostatin. Two of the Suffolk and two of the Texel sires were related, and a three-generation analysis was applied across these two extended families. Seven suggestive QTL were identified in this analysis, including one that had not been detected in the individual family analysis. The most significant QTL, which affected muscle depth, was located on chromosome 18 near the callipyge and Carwell loci. Based on the phenotypic effect and location of the QTL, the data suggest that a locus similar to the Carwell locus may be segregating in the United Kingdom Texel population.     

Detection and characterization of quantitative trait loci for meat quality traits in pigs.

In an experimental cross between Meishan and Dutch Large White and Landrace lines, 785 F2 animals with carcass information and their parents were typed for molecular markers covering the entire porcine genome. Linkage was studied between these markers and eight meat quality traits. Quantitative trait locus analyses were performed using interval mapping by regression under two genetic models: 1) the line-cross approach, where the founder lines were assumed to be fixed for different QTL alleles and 2) a half-sib model where a unique allele substitution effect was fitted within each of the 38 half-sib families. The line-cross approach included tests for genomic imprinting and sex-specific QTL effects. In total, three genome-wide significant and 26 suggestive QTL were detected. The significant QTL on chromosomes 3, 4, and 13, affecting meat color, were only detected under the half-sib model. Failure of the line-cross approach to detect the meat color QTL suggests that the founder lines have similar allele frequencies for these QTL. This study provides information on new QTL affecting meat quality traits. It also shows the benefit of analyzing experimental data under different genetic and statistical models.     

Quantitative trait locus mapping for meat quality traits in an Iberian x Landrace F2 pig population

An experimental F2 cross between Iberian and Landrace pig strains was performed to map quantitative trait loci (QTL) for diverse productive traits. Here we report results for meat quality traits from 369 F2 animals with records for pH 24 h postmortem (pH 24 h), muscle color Minolta measurements L* (lightness), a* (redness), and b* (yellowness), H* (hue angle), C* (chroma), intramuscular fat (IMF) and haematin pigment content measured in the longissimus thoracis. Pigs were genotyped for 92 markers covering the 18 porcine autosomes (SSC). Results of the genome scan show evidence for QTL for IMF (SSC6; F = 27.16), pH 24 h (SSC3; F = 7.73), haematin pigments (SSC4 and SSC7; F = 8.68 and 9.47 respectively) and Minolta color measurements L* (SSC4 and SSC7; F =16.42 and 7.17 respectively), and a* (SSC4 and SSC8; F = 8.05 and 7.36 respectively). No QTL were observed for the color measurements b*, H*, and C*. Alternative models fitting epistasis between QTL were also tested, but detected epistatic interactions were not significant at a genome-wise level. In this work we identify genomic regions related with meat quality traits. Improvement by traditional selection methods is complicated, and finer mapping would be required for their application in introgression programs.     

Effects of quantitative trait loci on chromosomes 1, 2, 4, and 7 on growth, carcass, and meat quality traits in backcross Meishan x Large White pigs

The aim of this work was to estimate whether genetic dissection of QTL on chromosomes 1, 2, 4, and 7, detected in an F2 Meishan x Large White population, can be achieved with a recombinant back-cross progeny test approach. For this purpose, a first generation of backcross (BC1) was produced by using frozen semen of F1 Large White x Meishan boars with Large White females. Four BC1 boars were selected because of their heterozygosity for at least 1 of the 4 regions. The BC1 boars were crossed with Large White sows, and the resulting BC2 offspring were measured for several growth and body composition traits. Contrary to the F2 animals, BC2 animals were also measured for meat quality traits in adductor, gluteus superficialis (GS), longissimus dorsi, and biceps femoris (BF) muscles. Each BC1 boar was tested for a total of 39 traits and for the 4 regions with statistical interval mapping analyses. The QTL effects obtained in BC1 families showed some differences compared with those described in F1 families. However, we confirmed QTL effects for growth in the SW1301-SW2512 markers interval on chromosome 1 and also for body composition in the SW1828-SW2512 markers interval on chromosome 1, in the SW2443-SWR783 markers interval on chromosome 2, and in the SW1369-SW632 markers interval on chromosome 7. In addition, we detected new QTL for growth traits on chromosome 2 and for meat quality traits on chromosomes 1 and 2. Growth of animals from weaning to the end of the test was influenced by the IGF2 gene region on chromosome 2. Concerning meat quality, ultimate pH of adductor, longissimus dorsi, and BF were affected by the interval delimited by UMNP3000 and SW2512 markers on chromosome 1, and a* of GS, L* of BF, and water-holding capacity of GS were affected by QTL located between marker loci SW2443 and SWR783 on chromosome 2. Recombinant progeny testing appeared to be a suitable strategy for the genetic dissection of the QTL investigated.     

Variance component analysis of quantitative trait loci for pork carcass composition and meat quality on SSC4 and SSC11

In a previous study, QTL for carcass composition and meat quality were identified in a commercial finisher cross. The main objective of the current study was to confirm and fine map the QTL on SSC4 and SSC11 by genotyping an increased number of individuals and markers and to analyze the data using a combined linkage and linkage disequilibrium analysis method. A modified version of the method excludes linkage disequilibrium information from the analysis, enabling the comparison of results based on linkage information only or results based on combined linkage and linkage disequilibrium information. Nine additional paternal half-sib families were genotyped for 18 markers, resulting in a total of 1,855 animals genotyped for 15 and 13 markers on SSC4 and SSC11, respectively. The QTL affecting meat color on SSC4 was confirmed, whereas the QTL affecting LM weight could not be confirmed. The combined linkage and linkage disequilibrium analysis resulted in the identification of new significant effects for 14 traits on the 2 chromosomes. Heritabilities of the QTL effects ranged from 1.8 to 13.2%. The analysis contributed to a more accurate positioning of QTL and further characterized their phenotypic effect. However, results showed that even greater marker densities are required to take full advantage of linkage disequilibrium information and to identify haplotypes associated with favorable QTL alleles.     

Detection of quantitative trait loci for growth and beef carcass fatness traits in a cross between Bos taurus (Angus) and Bos indicus (Brahman) cattle

This study was conducted to detect quantitative trait loci (QTL) affecting growth and beef carcass fatness traits in an experimental population of Angus and Brahman crossbreds. The three-generation mapping population was generated with 602 progeny from 29 reciprocal backcross and three F2 full-sib families, and 417 genetic markers were used to produce a sex-averaged map of the 29 autosomes spanning 2,642.5 Kosambi cM. Alternative interval-mapping approaches were applied under line-cross (LC) and random infinite alleles (RA) models to detect QTL segregating between and within breeds. A total of 35 QTL (five with genomewide significant and 30 with suggestive evidence for linkage) were found on 19 chromosomes. One QTL affecting yearling weight was found with genomewide significant evidence for linkage in the interstitial region of bovine autosome (BTA) 1, and an additional 19 QTL were detected with suggestive evidence for linkage under the LC model. Many of these QTL had a dominant (complete or overdominant) mode of gene action, and only a few of the QTL were primarily additive, which reflects the fact that heterosis for growth is known to be appreciable in crosses among Brahman and British breeds. Four QTL affecting growth were detected with genomewide significant evidence for linkage under the RA model on BTA 2 and BTA 6 for birth weight, BTA 5 for yearling weight, and BTA 23 for hot carcass weight. An additional 11 QTL were detected with suggestive evidence for linkage under the RA model. None of the QTL (except for yearling weight on BTA 5) detected under the RA model were found by the LC analyses, suggesting the segregation of alternate alleles within one or both of the parental breeds. Our results reveal the utility of implementing both the LC and RA models to detect dominant QTL and also QTL with similar allele frequency distributions within parental breeds.     

Detection of quantitative trait loci for growth and carcass composition in cattle

The objective of the present study was to detect quantitative trait loci for economically important traits in a family from a Bos indicus x Bos taurus sire. A Brahman x Hereford sire was used to develop a half-sib family (n = 547). The sire was mated to Bos taurus cows. Traits analyzed were birth (kg) and weaning weights (kg); hot carcass weight (kg); marbling score; longissimus area (cm2); USDA yield grade; estimated kidney, pelvic, and heart fat (%); fat thickness (cm); fat yield (%); and retail product yield (%). Meat tenderness was measured as Warner-Bratzler shear force (kg) at 3 and 14 d postmortem. Two hundred and thirty-eight markers were genotyped in 185 offspring. One hundred and thirty markers were used to genotype the remaining 362 offspring. A total of 312 markers were used in the final analysis. Seventy-four markers were common to both groups. Significant QTL (expected number of false-positives < 0.05) were observed for birth weight and longissimus area on chromosome 5, for longissimus area on chromosome 6, for retail product yield on chromosome 9, for birth weight on chromosome 21, and for marbling score on chromosome 23. Evidence suggesting (expected number of false-positives < 1) the presence of QTL was detected for several traits. Putative QTL for birth weight were detected on chromosomes 1, 2, and 3, and for weaning weight on chromosome 29. For hot carcass weight, QTL were detected on chromosomes 10, 18, and 29. Four QTL for yield grade were identified on chromosomes 2, 11, 14, and 19. Three QTL for fat thickness were detected on chromosomes 2, 3, 7, and 14. For marbling score, QTL were identified on chromosomes 3, 10, 14, and 27. Four QTL were identified for retail product yield on chromosomes 12, 18, 19, and 29. A QTL for estimated kidney, pelvic, and heart fat was detected on chromosome 15, and a QTL for meat tenderness measured as Warner-Bratzler shear force at 3 d postmortem was identified on chromosome 20. Two QTL were detected for meat tenderness measured as Warner-Bratzler shear force at 14 d postmortem on chromosomes 20 and 29. These results present a complete scan in all available progeny in this family. Regions underlying QTL need to be assessed in other populations.     

A primary screen of the bovine genome for quantitative trait loci affecting carcass and growth traits.

A primary genomic screen for quantitative trait loci (QTL) affecting carcass and growth traits was performed by genotyping 238 microsatellite markers on 185 out of 300 total progeny from a Bos indicus x Bos taurus sire mated to Bos taurus cows. The following traits were analyzed for QTL effects: birth weight (BWT), weaning weight (WW), yearling weight (YW), hot carcass weight (HCW), dressing percentage (DP), fat thickness (FT), marbling score (MAR), longissimus muscle area (LMA), rib bone (RibB), rib fat (RibF), and rib muscle (RibM), and the predicted whole carcass traits, retail product yield (RPYD), fat trim yield (FATYD), bone yield (BOYD), retail product weight (RPWT), fat weight (FATWT), and bone weight (BOWT). Data were analyzed by generating an F-statistic profile computed at 1-cM intervals for each chromosome by the regression of phenotype on the conditional probability of receiving the Brahman allele from the sire. There was compelling evidence for a QTL allele of Brahman origin affecting an increase in RibB and a decrease in DP on chromosome 5 (BTA5). Putative QTL at or just below the threshold for genome-wide significance were as follows: an increase in RPYD and component traits on BTA2 and BTA13, an increase in LMA on BTA14, and an increase in BWT on BTA1. Results provided represent a portion of our efforts to identify and characterize QTL affecting carcass and growth traits.     

Evaluation of associations between prion haplotypes and growth, carcass, and meat quality traits in a Dorset x Romanov sheep population

There is concern about potential antagonistic correlated responses due to intensive selection for scrapie-resistant haplotypes of the prion (PRNP) gene in sheep. The objective of the present research was to test for associations of PRNP haplotypes for codons 136, 154, and 171 with growth, carcass, and meat quality traits in an F2 Dorset x Romanov population (n = 415) segregating the 2 callipyge alleles. Haplotypes of the 3 PRNP codons were determined for each sheep, and breed of origin of each gamete was predicted by genotyping 6 microsatellite markers flanking the PRNP locus. Twenty-five growth, carcass, and meat quality traits were evaluated. Data were analyzed using a basic model consisting of fixed effects of year, sex, and callipyge genotype, the random effect of sire, and 7 covariates corresponding to the probability that a lamb inherited a specific PRNP haplotype of either Dorset or Romanov origin. A fixed effect of litter size was added to the model for growth traits. The model for carcass traits contained the linear and quadratic effects of chilled carcass weight and the interactions among callipyge genotype and linear and quadratic terms. For meat quality traits, the model contained chilled carcass weight as a covariate and the interaction between callipyge genotype and chilled carcass weight. A contrast between the resistant ARR haplotype and the average effect of other PRNP haplotypes was tested to investigate the effects of potential selection for ARR within each breed of origin (Dorset, ARR vs. ARQ, VRQ, and AHQ; Romanov, ARR vs. ARQ and VRQ). There was limited evidence that selecting for scrapie resistance would cause correlated responses due to linkage disequilibrium. Associations of only 3 traits with PRNP haplotypes were detected in either breed of origin. In Romanov, the ARR haplotype was associated with longer carcasses (P < 0.013), narrower rumps (P = 0.038), and less marbling (P = 0.022) than the average of ARQ and VRQ haplotypes. No significant contrasts were detected for Dorset. This study is the first to account for breed of origin while investigating haplotype associations in an F2 population. This study provided limited evidence of associations between PRNP haplotypes and growth, carcass, and meat quality traits.     

Relationship between perilipin genes polymorphisms and growth,carcass and meat quality traits in pigs

The perilipins (PLIN) belong to a family of structural proteins that play a role regulating intracellular lipid storage and mobilization. Here, PLIN1 and PLIN2 have been evaluated as candidate genes for growth, carcass and meat quality traits in pigs. A sample of 607 Duroc pigs were genotyped for two single‐nucleotide polymorphisms, one in intron 2 of the PLIN1 gene (JN860199:g.173G>A) and the other at the 3′ untranslated region of the PLIN2 gene (GU461317:g.98G>A). Using a Bayesian approach, we have been able to find evidence of additive, dominant and epistatic associations of the PLIN1 and PLIN2 polymorphisms with early growth rate and carcass length. However, the major effects were produced by the dominant A allele at the PLIN2 polymorphism, which also affected the carcass lean weight. Thus, pigs carrying an additional copy of the A allele at the g.98G>A PLIN2 polymorphism had a probability of at least 98% of producing carcasses with heavier lean weight (+0.41 kg) and ham weight (+0.10 kg). The results obtained indicate that the PLIN2 polymorphism could be a useful marker for lean growth. In particular, it may help to reduce the undesired negative correlated response in lean weight to selection for increased intramuscular fat content, a common scenario in some Duroc lines involved in the production of high quality pork products.     

Quantitative trait loci mapping for meat quality and muscle fiber traits in a Japanese wild boar x Large White intercross

Three generations of a swine family produced by crossing a Japanese wild boar and three Large White female pigs were used to map QTL for various production traits. Here we report the results of QTL analyses for skeletal muscle fiber composition and meat quality traits based on phenotypic data of 353 F(2) animals and genotypic data of 225 markers covering almost the entire pig genome for all of the F(2) animals as well as their F(1) parents and F(0) grandparents. The results of a genome scan using least squares regression interval mapping provided evidence that QTL (<1% genome-wise error rate) affected the proportion of the number of type IIA muscle fibers on SSC2, the number of type IIB on SSC14, the relative area (RA) of type I on SSCX, the RA of type IIA on SSC6, the RA of type IIB on SSC6 and SSC14, the Minolta a* values of loin on SSC4 and SSC6, the Minolta b* value of loin on SSC15, and the hematin content of the LM on SSC6. Quantitative trait loci (<5% genome-wise error rate) were found for the number of type I on SSC1, SSC14, and SSCX, for the number of type IIA on SSC14, for the number of type IIB on SSC2, for the RA of type IIA on SSC2, for the Minolta b* value of loin on SSC3, for the pH of loin on SSC15, and for the i.m. fat content on SSC15. Twenty-four QTL were detected for 11 traits at the 5% genome-wise level. Some traits were associated with each other, so the 24 QTL were located on 11 genomic regions. In five QTL located on SSC2, SSC6, and SSC14, each wild boar allele had the effect of increasing types I and IIA muscle fibers and decreasing type IIB muscle fibers. These effects are expected to improve meat quality.     

Evaluation of approaches to detect quantitative trait loci for growth, carcass, and meat quality on swine chromosomes 2, 6, 13, and 18. I. Univariate outbred F2 and sib-pair analyses

Results from univariate outbred F2 interval mapping and sib-pair analyses of 12 growth and 28 carcass traits to identify QTL on SSC 2, 6, 13, and 18 were compared. Phenotypic and genetic data were recorded on a three-generation resource population including 832 F2 pigs from a cross between three Berkshire sires and 18 Duroc dams. Thirty markers with an average spacing of approximately 16 cM were genotyped across the four chromosomes. The outbred F2 mixed model included the effects of sex, birth month, and year, one-QTL additive, dominance and imprinting coefficients calculated every 1 cM using interval mapping, and a random family effect. The general sib-pair model used to describe the phenotypic differences between sib-pairs included the same systematic and random effects and a one-QTL additive coefficient calculated every 1 cM. The outbred F2 analysis found significant evidence of QTL on SSC 2 associated with 105-d weight, backfat thicknesses, LM area, fat percent, shear force, juiciness, marbling, and tenderness. In addition, QTL were identified on SSC 6 relating to 42-d weight and LM area, and on SSC 18 for fat and moisture percents. In most instances, the outbred F2 approach offered greater power to detect QTL; however, the sib-pair analysis offered greater power in several instances. The trait-specific superiority could be due to the relative advantage of each model within a trait data set. The two approaches provided complementary evidence for QTL segregating between the Berkshire and Duroc breeds used in the study that may be used to aid marker-assisted introgression and selection and candidate gene studies to improve swine growth and meat quality characteristics.