Multiple element concentration in the grain of spring barley (Hordeum vulgare L.) collection

Multiple element analyses were carried out to investigate variation in element concentrations in barley grains of 336 genotypes. Of 13 elements analyzed, Ba ranged from 0.2 to 8.9?mg kg^?1, Ca from 186.4 to 977.5?mg kg^?1, Cu from 1.5 to 9.8?mg kg^?1, K from 353.2 to 7721.5?mg kg^?1, Mg from 1049.8 to 2024.2?mg kg^?1, Mn from 8.1 to 22.9?mg kg^?1, Na from 55.9 to 627.9?mg kg^?1, P from 2272.9 to 5428.8?mg kg^?1, S from 880.7 to 1898.0?mg kg^?1, Si from 19.1 to 663.2?mg kg^?1, and Sr from 0.35 to 2.62?mg kg^?1 in the barley grain. The least square means showed high Zn, Fe, Mg, P, and S concentration in AM-64 and AM-228 genotypes. The principal component analysis of element concentration showed four PCs explained 64.3% total variance. Strong positive correlations (p?<?0.001) of Fe-Mn, Fe-S, S-Mn, Zn-P, Zn-Mg, Mg-P, Mg-Mn, and Ca-Sr were found. The identification barley genotypes that showed high elements concentration furnish valuable genetic resources for biofortification in future.     

Sufficiency ranges for lemon balm and nutrient removals in aboveground phytomass

A set of fertilizer experiments were conducted during three growing seasons with the aim of establishing sufficiency ranges and crop nutrient removals for Melissa officinalis L. Critical nutrient concentrations were determined by the Cate–Nelson method or by removing 10% of extreme high and low values, respectively if a positive response to a given nutrient was recorded or not. Sufficiency ranges for macro, micronutrients, and SPAD-readings were set as: 27.0–40.0 g N kg^?1; 0.8–2.7 g P kg^?1 (May–August); 1.5–3.8 g P kg^?1 (September–November); 10.0–25.0 g K kg^?1 (May–August); 18.0–32.0 g K kg^?1 (September–November); 5.0–25.0 g Ca kg^?1; 3.5–8.5 g Mg kg^?1; 18–125 mg B kg^?1; 5–25 mg Cu kg^?1; 75–500 mg Fe kg^?1; 20–300 mg Zn kg^?1; 30–250 g Mn kg^?1; 30–45 SPAD-units. These results will allow laboratories to use plant analysis as an important tool in improving the fertilizer recommendations for this species.     

Nutrient Uptake in Dry Bean Genotypes

Dry bean is an important legume for human consumption in South America. A greenhouse experiment was conducted to evaluate uptake and use efficiency of macro- and micronutrients by six dry bean genotypes at two P levels (25 and 200 mg kg^?1 soil). Shoot dry weight and grain yield varied significantly among genotypes and significantly increased with increasing phosphorus (P) levels. Grain harvest index (GHI) and 100-grain weight also differ significantly among genotypes and significantly increased with the increasing P levels. Based on grain yield efficiency index (GYEI), genotypes were classified as efficient and inefficient. The most efficient genotype was CNFP 10104, and inefficient genotypes were CNFP 10103 and CNFP 10120. Number of pods per plant and number of seeds per pod increased significantly with the addition of 200 mg P kg^?1 of soil compared to the low level of P (25 mg P kg^?1). Similarly, nitrogen (N), P, calcium (Ca), magnesium (Mg), sulfur (S), zinc (Zn), copper (Cu), and manganese (Mn) concentrations and uptake in the shoot and grain also significantly varied among genotypes. Uptake of macro- and micronutrients was greater under the greater P rate compared to the low P rate. This may be related to greater shoot or grain yield at 200 mg P kg^?1 soil compared to 25 mg P kg^?1 of soil.     

Screening Upland Rice Genotypes for Manganese‐use Efficiency

Manganese (Mn) deficiency in upland rice grown after common bean or soybean, which received adequate rate of liming on highly weathered Oxisols, is observed. A greenhouse experiment was conducted to evaluate Mn‐use efficiency of 10 promising upland rice genotypes. The genotypes were grown on an Oxisol at 0 mg Mn kg^?1 (natural soil Mn level) and 20 mg Mn kg^?1 of soil applied as manganese sulfate. Grain yield, panicle number, and grain harvest index (GHI) were significantly (P < 0.01) influenced by genotype. However, shoot dry weight was significantly affected by Mn as well as genotype treatments. Manganese uptake in the shoot as well as in the grain was also affected by genotype treatment. On the basis of Mn‐use efficiency (mg grain weight/mg Mn accumulated in shoot and grain), genotypes were classified as efficient and responsive (ER), efficient and nonresponsive (ENR), nonefficient and responsive (NER), and nonefficient and nonresponsive (NENR). Genotypes Carisma, CNA8540, and IR42 were classified as ER, and genotypes CNA8557 and Maravilha were classified as ENR. Genotype Caipo was in the group NER, and in the NENR group were genotypes Bonança, Canastra, Caraja, and Guarani. From a practical point of view, genotypes that produce high grain yield at a low level of Mn and respond well to Mn additions are the most desirable because they are able to express their high yield potential in a wide range of Mn availability.     

Correlation analysis of mineral element contents and quality traits in milled rice (Oryza stavia L.)

The relationships among potassium (K), calcium (Ca), sodium (Na), magnesium (Mg), iron (Fe), zinc (Zn), copper (Cu), and manganese (Mn) contents in milled rice (Oryza stavia L.) of 274 genotypes and the relationships between these mineral element contents and other rice quality traits including 3 cooking quality traits, 17 amino acid contents, and protein content were investigated. The results showed that there were significant correlations among most of mineral element contents. Mg, Fe, and Mn contents were significantly correlated with most of the other mineral element contents, while Cu content had significantly negative associations with the K and Mg contents of rice. The relationships between mineral element contents and cooking quality traits showed that gel consistency (GC) was significantly correlated with K, Cu, and Mn contents of rice. Amylose content (AC) was significantly associated with K, Na, Mg, Cu, and Mn contents. The alkali spreading value (ASV) had closely positive relationships with Ca, Mg, and Mn contents. In addition, 8 mineral element contents had obvious correlations with different amino acid contents. Mg, Ca, and Zn contents were significantly correlated with most of the 17 amino acid contents, but Na content did not correlate with amino acid contents except aspartic acid of rice. Furthermore, significant associations were found between protein content and Na, Mg, Zn, Cu, or Mn content. Six principal components were extracted to explain 84.50% of the total variances and contained the information provided by the original 29 variables according to the principal component analysis.     

Yield enhancement and biofortification of chickpea (Cicer arietinum L.) grain with iron and zinc through foliar application of ferrous sulfate and urea

Abstract

This study investigated effects of iron (Fe) and nitrogen (N) foliar application on Fe and zinc (Zn) content in chickpea grain, grain yield, and protein content. Application of FeSO₄ at 0.5% at flowering?+?pod formation stages resulted in the highest Fe (73.50 and 75.34?mg Fe kg^?1 grain in first and second year) and Zn (35.08 and 34.21?mg Zn kg^?1 grain) content in grain followed by the application of FeSO₄ at 0.5% at flowering stage alone (68.27 and 69.97?mg Fe kg^?1 grain and 32.44 and 32.27?mg Zn kg^?1 grain) and control (54.63 and 55.69?mg Fe kg^?1 grain and 29.48 and 29.07?mg Zn kg^?1 grain). Urea spray at 2% at flowering as well as at flowering?+?pod formation stages also improved the Zn and Fe content in the grain. Combined use of Fe and urea improved the grain Fe and Zn content over sole application of Fe.     

Manganese foliar supplementation impacts rice yield in tropical lowlands

Abstract

The aim of this work was to evaluate manganese (Mn) sources and levels effects in irrigated rice production in central Brasil (tropical lowlands of Tocantins state). The experiment was conducted in a 5x5?+?1 factorial scheme, five Mn sources and five levels (0.5; 1.0; 1.5; 2.0; and 2.5?kg ha^?1), applied in induction of tillering of rice plants, plus a control without treatment, and Mn content in leaves (mg kg^?1), number of panicles per area (m²), hundred grains weight (g), intact grains (%), and grain yield (kg ha^?1) were analyzed. Treatments with Mn-carbonate source got the best results and this source at the level of 1.5?kg ha^?1 provided the highest yield: 7,375?kg ha^?1. Higher values were obtained with the application of 1.0 to 1.5?kg ha^?1 of Mn, except for the intact grains where the best means were obtained at 2.5?kg ha^?1.     

Influence of mineral and organic fertilizers on soil organic carbon pools

Abstract

The influence of farmyard manure (FYM) and equivalent mineral NPK application on organic matter content, hot water extractable carbon (HWC), microbial biomass C (C_mic), and grain yields in a long-term field experiment was assessed after 40 years in Hungary. The unfertilized plot, FYM fertilized plots and plots fertilized with equivalent NPK fertilizer contained 0.99%, 1.13% and 1.05% total organic carbon (TOC) respectively. Compared to the unfertilized plot, FYM application resulted in 8.2% higher TOC than equivalent NPK fertilization. The highest TOC was only 1.21%, much lower than expected for a soil containing 21.3% of clay. The quantity of HWC varied depending on the type of fertilization: Compared to control, FYM treatments lead to 29% more HWC than mineral fertilization (FYM: 328 mg kg^?1; NPK: 264 mg kg^?1). The impact of FYM and equivalent NPK fertilizer on C_mic was contrary. FYM and NPK resulted in 304 and 423 mg kg^?1 C_mic, respectively. The difference was 119 mg kg^?1; 42% as compared to the unfertilized plot. Despite the higher HWC content, FYM treatments lead to significantly less (35%) grain yields than equivalent NPK doses; C_mic content showed closer correlation to grain yields.     

红黄壤的长石风化

研究了玄武岩和花岗岩发育的红壤和山地黄壤的长石风化,认为长石在土壤中的风化受气候因素和母质来源的双重影响,因而支配着它在不同粒级中的分布。两种母质发育的红黄壤中,各种长石的抗风化顺序是Na长石≥K长石>Ca长石。     

NITROGEN USE EFFICIENCY IN UPLAND RICE GENOTYPES

Nitrogen (N) deficiency is one of the most yield-limiting nutrients in upland rice growing regions word wide. A greenhouse experiment was conducted with the objective to evaluate nineteen upland rice (Oryza sativa. L.) genotypes for N use efficiency. The soil used in the experiment was an Oxisol and two N levels used were without N application (low level) and an application of 400 mg N kg^?1 of soil (high level). Grain yield and yield components and N uptake parameters were significantly affected by N and genotype treatments. Regression analysis showed that plant height, shoot dry weight, number of panicles per pot, number of grains per panicle, grain harvest index, N uptake in shoot and grain were having significant positive relation with grain yield. Nitrogen concentration of 6.4 g kg^?1 in the shoot is established as deficient level and 9.5 g kg^?1 as sufficient level at harvest. Agronomic efficiency of N (grain yield/unit of N applied) and N utilization efficiency (physiological efficiency X apparent recovery efficiency) were significantly different among genotypes. These two N use efficiencies were having significant quadratic relationship with grain yield. Soil pH, exchangeable soil Ca and base saturation were having significantly positive association with grain yield. However, soil extractable phosphorus (P), potassium (K), hydrogen (H⁺), aluminum (Al) and cation exchange capacity were having significantly negative association with grain yield.     

Influence of Lime and Gypsum on Yield and Yield Components of Soybean and Changes in Soil Chemical Properties

Soybean is one of the most important legume crops in the world. Two greenhouse experiments were conducted to determine the influence of liming and gypsum application on yield and yield components of soybean and changes in soil chemical properties of an Oxisol. Lime rates used were 0, 0.71, 1.42, 2.14, 2.85, and 4.28 g kg^?1 soil. Gypsum rates applied were 0, 0.28, 0.57, 1.14, 1.71, and 2.28 g kg^?1 soil. Lime as well as gypsum significantly increased grain yield in a quadratic fashion. Maximum grain yield was achieved with the application of 1.57 g lime per kg soil, whereas the gypsum requirement for maximum grain yield was 1.43 g per kg of soil. Lime significantly improved soil pH, exchangeable soil calcium (Ca) and magnesium (Mg) contents, base saturation, and effective cation exchange capacity (ECEC). However, lime application significantly decreased total acidity [hydrogen (H) + aluminum (Al)], zinc (Zn), and iron (Fe) contents of the soil. The decrease in these soil properties was associated with increase in soil pH. Gypsum application significantly increased exchangeable soil Ca, base saturation, and ECEC. However, gypsum did not change pH and total acidity (H + Al) significantly. Adequate soil acidity indices established for maximum grain yield with the application of lime were pH 5.5, Ca 1.8 cmol_c kg^?1, Mg 0.66 cmol_c kg^?1, base saturation 53%, Ca saturation 35%, and Mg saturation 13%. Soybean plants tolerated acidity (H + Al) up to 2.26 cmol_c kg^?1 soil. In the case of gypsum, maximum grain yield was obtained at exchangeable Ca content of 2.12 cmol_c kg^?1, base saturation of 56%, and Ca saturation of 41%.     

Response of Chickpea Cultivars to Application of Boron in Boron‐Deficient Calcareous Soils

Abstract

This study was conducted to investigate the effects of four boron (B) doses (control, 0 kg B ha^?1; B₁, 1 kg B ha^?1; B₂, 3 kg B ha^?1; and B₃, 6 kg B ha^?1) in soils deficient in available B (0.19 mg B kg^?1) and lime (CaCO₃) content (20.7%) on yield and some yield components of five chickpea (Cicer arietinum L.) genotypes, namely Akçin‐91, Population, Gökçe, ?zmir‐92, and Menemen‐92 in central Anatolian Turkey in the 2002 and 2003 growing seasons. Plant height, pods per plant, grain yield, protein content, protein yield, thousand seed weight, and leaf B concentration were measured. Grain yields in all genotypes (except for Gökçe) were significantly increased by 1 kg ha^?1 B application. Application of 1 kg ha^?1 B increased the yield by an average of 5%. Genotypes studied showed significant variations with respect to their responses to additional B. Akçin‐91 gave the highest grain yield (1704.8 kg ha^?1) at 3 kg B ha^?1, whereas Population, ?zmir‐92, and Menemen‐92 yielded best (1468.2 kg ha^?1, 1483.0 kg ha^?1, and 1484.7 kg ha^?1, respectively) at 1 kg B ha^?1. Interestingly, Gökçe reached to the highest level of grain yield (1827.1 kg ha^?1) at the control. Gökçe was a B deficiency B tolerance genotype. The other genotypes appeared to have high sensitivity to B deficiency. This study showed that B deficiency could result in significant yield losses in chickpea under the experimental conditions tested. Thus, B contents of soils for the cultivation of chickpea should be analyzed in advance to avoid yield losses.     

Nutrient constraint of rainfed rice production in foot slope soil of Guinea Forest in Côte d’Ivoire

Soil nutrient deficiencies can affect rice yield and grain mineral content wherever they occur, but an understanding of their effect on upland rice production in humid forest zone of West Africa is still limited. Therefore, a nutrient omission trial was conducted on foot slope soil in 2003, 2004 and 2005 in Côte d’Ivoire using rice variety WAB 56–104. The effect on rice grain yield (GY) and nutrient content of complete fertilizer (Fc with nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg) and zinc (Zn)) was compared with Fc from which a specific nutrient was excluded (Fc – N, Fc – P, Fc – K, Fc – Ca, Fc – Mg and Fc – Zn). Before the trial, soil K (0.10 cmol kg^?1) and Mg (0.20 cmol kg^?1) contents were suitable, but available P-Bray I (4.2 mg kg^?1) was found to be deficient. In course of the study, K, Mg and P deficiencies were observed. An antagonistic effect was observed between rice GY and grain concentrations in P, Mg and Ca for treatments Fc – Mg, Fc – P and Fc – K, respectively. Therefore, the use of P, K and Mg fertilizers is recommended for successive cropping seasons in order to rich stable and high rice yield while decreasing of grain concentrations in P, Mg and Ca can be observed.     

VARIATION AND INTERRELATIONS AMONG NUTRIENT ELEMENTS IN WHEAT LEAVES USED FOR FORAGE

Dual purpose wheat provides valuable forage resources for cattle in the southern Great Plains during winter. In this study, 96 recombinant inbred lines (RILs) were analyzed for variation in concentrations of 11 mineral elements in leaves. The mean concentration was 133.4 mg kg^?1 for manganese (Mn) and 293 mg kg^?1 for iron (Fe), being much higher than the 30 mg kg ^?1 recommended for each of these two minor mineral elements. Mean concentrations of zinc (Zn) (24.1 mg kg^?1) and copper (Cu) (4.4 mg kg^?1) were much lower than recommended concentrations. A highly significant correlation was detected between major minerals, magnesium (Mg) and calcium (Ca) (r = 0.9272**) and between minor minerals, Fe and nickel (Ni) (r = 0.8905**). Copper had no significant correlation with any minerals except Zn (r = 0.2529*), whereas Zn had significant correlations with all of the tested minerals except Cu, Mn, and Ni. The interrelations between different minerals provided information for effective selection strategy for ideal mineral concentrations in breeding of dual purpose wheat.     

Influence of Lime and Gypsum on Growth and Yield of Upland Rice and Changes in Soil Chemical Properties

Upland rice is an important crop in the cropping systems of South America, including Brazil. Two greenhouse experiments were conducted to determine influence of lime and gypsum on yield and yield components of upland rice and changes in the chemical properties of an Oxisol. The lime rates used were 0, 0.71, 1.42, 2.14, 2.85, and 4.28 g kg^?1 soil. The gypsum rates were 0, 0.28, 0.57, 1.14, 1.71, and 2.28 g kg^?1. Lime as well as gypsum significantly increased plant height, straw and grain yield, and panicle density in a quadratic fashion. Adequate lime and gypsum rates for maximum grain yield were 1.11 g kg^?1 and 1.13 g kg^?1, respectively. Plant height, straw yield, and panicle density were positively related to grain yield. Lime as well as gypsum application significantly changed extractable calcium (Ca), magnesium (Mg), hydrogen (H)+aluminum (Al), base saturation, and effective cation exchange capacity. In addition, liming also significantly increased pH, extractable phosphorus (P) and potassium (K), calcium saturation, magnesium saturation, and potassium saturation. Optimum acidity indices for the grain yield of upland rice were pH 6.0, Ca 1.7 cmol_c kg^?1, base saturation 60%, and calcium saturation 47%. In addition, upland rice can tolerate 42% of acidity saturation.     

Physical Composition of Municipal Solid Waste and Nutrient Contents of Its Organic Component in Uyo Municipality,Nigeria

ABSTRACT

This research was conducted within Uyo metropolis, Nigeria. Three designated dumpsites of municipal solid waste (MSW) were randomly selected for the collection of samples for analysis of the physical and macronutrient contents of their organic fraction. After the waste was sorted, its physical components were determined to be: organic materials (73.7%), plastics/polythene (12.9%), cans/metals (4.3%), bottles/glasses (4.2%), clothes/shoes (4.3%), and ceramics (0.6%). Laboratory analysis of the organic components of the waste indicated that the mean nitrogen (N), phosphorus (P), and potassium (K) contents were 11.0, 3.2, and 10.7 g kg^?1, respectively. The mean contents of other elements were calcium (Ca) (87.7 g kg^?1), sodium (Na) (18.4 g kg^?1), and sulfur (S) (2.3 g kg^?1). The mean organic-matter content of the organic components of the waste was 223.7 g kg^?1. Both the physical and macronutrient contents of the waste differed from one location to another within the municipality. The high content of organic matter and some essential macronutrients in the waste suggest its high value for use in the production of organic and organo-mineral fertilizers for sustainable agricultural development.     

Water flow paths in soil control element exports in an Andean tropical montane forest

We tested the hypothesis that concentrations of chemical constituents in stream water can be explained by the depth of water flow through soil. Therefore, we measured the concentrations of total organic carbon (TOC), NO₃‐N, NH₄‐N, dissolved organic nitrogen (DON), P, S, K, Ca, Mg, Na, Al and Mn in rainfall, throughfall, stemflow, litter leachate, mineral soil solution and stream water of three 8–13 ha catchments on steep slopes (1900–2200 m above sea level) of the south Ecuadorian Andes, from April 1998 to April 2003. Peak C (14–22 mg litre^?1), N (0.6–0.9 mg litre^?1), K (0.5–0.7 mg litre^?1), Ca (0.6–1.0 mg litre^?1), Mg (0.3–0.5 mg litre^?1), Al (110–390 μg litre^?1) and Mn (3.9–8.4 μg litre^?1) concentrations in stream water were associated with lateral flow (fast near‐surface flow in saturated topsoil) while the greatest P (0.1–0.3 mg litre^?1), S (0.3–0.7 mg litre^?1) and Na (3.0–6.0 mg litre^?1) concentrations occurred during low baseflow conditions. All elements had greater concentrations in the organic layer than in the mineral soil, but only C, N, K, Ca, Mg, Al and Mn were flushed out during lateral‐flow conditions. Phosphorus, S and Na, in contrast, were mainly released by weathering and (re‐)oxidation of sulphides in the subsoil. Baseflow accounted for 32% to 61% of P export, while > 50% of S was exported during intermediate flow conditions (i.e. lateral flow at the depth of several tens of cm in the mineral soil). Near‐surface water flow through C‐ and nutrient‐rich topsoil during rainstorms was the major export pathway for C, N, Al and Mn (contributing > 50% to the total export of these elements). Near‐surface flow also accounted for one‐third of total base metal export. Our results demonstrate that near‐surface flow related to storm events markedly affects the cycling of many nutrients in steep tropical montane forests.     

The effect of different production systems on the content of micronutrients and trace elements in potato tubers

The aim of this study was to determine the effect of different production systems (conventional, integrated and organic) on the content of micronutrients and trace elements in the tubers of very early, early and medium-early maturing potato cultivars. Five Polish potato cultivars were grown in three production systems under field conditions. In plant material selected microelements (chemical elements essential for living organisms) were analysed: boron (B), copper (Cu), iron (Fe), manganese (Mn) and zinc (Zn) as well as some trace elements (not regarded as essential element for living organisms): chromium (Cr), nickel, (Ni) and lead (Pb). The content of micronutrients and trace elements in potato tubers was modified by production system, genotype and weather conditions during the growing season. Organically grown potatoes had a higher content of B (8.6–8.9?mg kg^?1) and Cu (2.8–3.1?mg?kg^?1), and a lower content of Fe (47.0–47.1?mg?kg^?1), Mn (6.0–6.4?mg?kg^?1) and Zn (11.9–12.2?mg?kg^?1), than potatoes grown in conventional and integrated systems. Potatoes grown in the conventional system had the highest Pb content. Organic cultivation can assure better alimentation of potato tubers with B and Cu, which are important microelements often deficient in the soils. On the contrary, when cultivating potato in conventional system, one should supply this element with fertilisers.     

Impacts of termites on selected soil physicochemical characteristics in the highlands of Southwest Ethiopia

Termites are reported to improve soil physicochemical properties thereby enhance soil fertility of their mound and foraging areas. Empirical study pertaining to these effects is missing in Southwest Ethiopia. For this study, soil samples affected by termite activities were collected at 1 m interval within 0–3 m distance from the base of six termite mounds on gently sloping and sloping land and analyzed for physicochemical parameters. The result of the analysis depicted that soil bulk density (1.38–1.15 g cm^?3) and moisture content (21.1–9.9%) decreased with increased distance from the mound base. While clay content decreased with increased distance from the mound base from72.0% to 45.5%, sand and silt contents increased from 8.0% to 21.3% and 19.3% to 28.5%, respectively. PH (6.23), organic carbon (3.85%), total nitrogen (0.4%), cation exchange capacity CEC (30.43 cmol kg^?1), exchangeable Ca (13.73 cmol kg^?1), Mg (3.15 cmol kg^?1), and PBS (56.8%) were higher on termite mounds. While, electrical conductivity (0.03 dS m^?1–0.06 dS m^?1), exchangeable K (0.52–0.93 cmol kg^?1) and Na (0.02–0.03 cmol kg^?1) showed increasing trend with the distance from the mound base. Our results indicated that termite mounds are important sinks of organic matter and mineral nutrients, and hence contribute to the enhancement of soil fertility. Thus, for subsistent farmers the uses of termite mounds as a fertilizer present an opportunity to improve agricultural production.     

Compositional Nutrient Diagnosis of a Sample of Plantain from Sur del Lago de Maracaibo (Venezuela)

The aim of the present study was the estimation of reference concentration values for plantain (Musa AAB subgroup plantain cv. Hartón) using the Compositional Nutrient Diagnosis system. Eighty-eight plants were sampled in 2000–2001 in commercial orchards in Sur del Lago de Maracaibo (Venezuela), their yields recorded, and nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), sulfur (S), zinc (Zn), copper (Cu), iron (Fe), manganese (Mn), and sodium (Na) concentrations determined in the foliar material. A yield cutoff of 16.98 kg·bunch^?1, obtained after modeling the cumulative variance ratio function versus yield relationships with sigmoidal (Boltzmann) equations, was selected as the value above which plants were regarded as high yielders. Estimations from the high-yield group (N = 31) resulted in the following reference concentrations for macronutrients (in g·kg^?1): 27.4 (N), 2.0 (P), 41.2 (K), 6.5 (Ca), 2.8 (Mg), 1.9 (S), and 0.5 (Na). For micronutrients the reference concentrations were (in mg·kg^?1): 15.6 (Zn), 8.3 (Cu), 64.0 (Fe), and 76.3 (Mn).