长江三角洲地区污泥中多环芳烃的污染研究

To ascertain the contaminated conditions of polycyclic aromatic hydrocarbons （PAHs） in sludge and to evaluate the risk of application of this sludge for agricultural purposes, 44 sludge samples obtained from 15 cities in the Yangtze River Delta area of China were investigated using capillary gas chromatography/mass spectrometry （GC/MS） after ultrasonic extraction and silica gel cleanup. PAHs＇ contents ranged from 0.0167 to 15.4860 mg kg^-1 （dry weight, DW） and averaged 1.376 mg kg^-1, with most samples containing 〈 1.5 mg kg^-1. Pyrene （PY）, fluoranthene （FL）, benzo[b]fluoranthene （BbF）, indeno[1,2,3-cd]pyrene （IND）, benzo[a]pyrene （B[a]P）, and benzo[g,h,i]perylene （BghiP） were the most dominant compounds, ranging from 0.1582 to 0.2518 mg kg^-1. Single PAH, such as naphthalene （NAP, 2-benzene rings）, phenanthrene （PA, 3-benzene rings）, PY （4-benzene rings）, and FL （3-benzene rings）, had high detection rates （76.1%-93.5%）. The distribution patterns of PAHs were found to vary with the sludge samples; however, the patterns showed that a few compounds with 2- and 3-benzene rings were commonly found in the samples, whereas those with 4-, 5-, and 6-benzene rings were usually less commonly found. All the 44 sludge samples were within the B[a]P concentration limit for sludge applied to agricultural land in China （〈 3.0 rag kg^-1）. The probable sources of PAH contamination in the sludge samples were petroleum, petroleum products, and combustion of liquid and solid fuel. The concentrations and distributions of the 16 PAHs in sludge were related to sludge type, source, and treatment technology, together with the physicochemical properties.     

上海市土壤中持久性毒害污染物和盐分含量特征研究

Some farmland soils in Shanghai had high salinity levels, suggesting secondary salinization of the soils. The soil problems in Shanghai were studied, including the salinity and nitrate nitrogen (NO₃^--N) concentrations, heavy metal pollution characteristics, and organochlorine pesticide (OCP) residual levels and polycyclic aromatic hydrocarbon (PAH) contents. Accumulation of NO₃^--N in vegetable soils was the most significant among different functional soils. Heavy metal pollution was significant in the samples collected from the sewage-irrigated land and roadside. The identification of the metal sources through multivariate statistical analysis indicated that Pb, Zn, Cu and Cr in urban soils were from the traffic pollutants; excessive application of fertilizer and irrigation were the main reasons for the metal pollution in agricultural soils; Ni in the observed soils was controlled by parent soils. OCPs could still be detected in farmland soils but degraded greatly in last 20 years after prohibition of their usage. PAHs with 2-3 rings were the main components in industrial soils. The concentrated PAHs in the investigated soils were likely from petroleum and coal combustion.     

基于小白菜Cd吸收推算土壤Cd安全阈值

Cadmium(Cd), a common toxic heavy metal in soil, has relatively high bioavailability, which seriously threatens agricultural products. In this study, 8 different soils with contrasting soil properties were collected from different regions in China to investigate the Cd transfer coefficient from soil to Chinese cabbage(Brassica chinensis L.) and the threshold levels of Cd in soils for production of Chinese cabbage according to the food safety standard for Cd. Exogenous Cd(0–4 mg kg~(-1)) was added to the soils and equilibrated for 2 weeks before Chinese cabbage was grown under greenhouse conditions. The influence of soil properties on the relationship between soil and cabbage Cd concentrations was investigated. The results showed that Cd concentration in the edible part of Chinese cabbage increased linearly with soil Cd concentration in 5 soils, but showed a curvilinear pattern with a plateau at the highest dose of exogenous Cd in the other 3 soils. The Cd transfer coefficient from soil to plant varied significantly among the different soils and decreased with increasing soil p H from 4.7 to 7.5. However, further increase in soil pH to 8.0 resulted in a significant decrease in the Cd transfer coefficient. According to the measured Cd transfer coefficient and by reference to the National Food Safety Standards of China, the safety threshold of Cd concentration in soil was predicted to be between 0.12 and 1.7 mg kg~(-1) for the tested soils. The predicted threshold values were higher than the current soil quality standard for Cd in 5 soils, but lower than the standard in the other 3 soils. Regression analysis showed a significant positive relationship between the predicted soil Cd safety threshold value and soil p H in combination with soil organic matter or clay content.     

广东大宝山矿区土壤重金属污染

Soil contamination in the vicinity of the Dabaoshan Mine, Guangdong Province, China, was studied through determi- nation of total concentrations and chemical speciation of the toxic metals, Cu, Zn, Cd, and Pb, using inductively coupled plasma mass spectrometry. The results showed that over the past decades, the environmental pollution was caused by a combination of Cu, Zn, Cd, and Pb, with tailings and acid mine drainage being the main pollution sources affecting soils. Significantly higher levels （P ≤ 0.05） of Cu, Zn, Cd, and Pb were found in the tailings as compared with paddy, garden, and control soils, with averages of 1486, 2516, 6.42, and 429 mg kg^-1, respectively. These metals were continuously dispersed downstream from the tallings and waste waters, and therefore their concentrations in the paddy soils were as high as 567, 1 140, 2.48, and 191 mg kg^-1, respectively, being significantly higher （P ≤ 0.05） as compared with those in the garden soils. The results of sequential extraction of the above metals from all the soil types showed that the residual fraction was the dominant form. However, the amounts of metals that were bound to Fe-Mn oxides and organic matter were relatively higher than those bound to carbonates or those that existed in exchangeable forms. As metals could be transformed from an inert state to an active state, the potential environmental risk due to these metals would increase with time.     

基于模糊逻辑的北京城市边缘区土壤重金属污染空间预测

Fuzzy classification combined with spatial prediction was used to assess the state of soil pollution in the peri-urban Beijing area. Total concentrations of As, Cr, Cd, Hg, and Pb were determined in 220 topsoil samples （0-20 cm） collected using a grid design in a study area of 2 600 kin2. Heavy metal concentrations were grouped into three classes according to the optimum number of classes and fuzziness exponent using the fuzzy comean （FCM） algorithm. Membership values were interpolated using ordinary kriging. The polluted soils of the study area induced by the measured heavy metals were concentrated in the northwest corner and eastern part, especially the southeastern part close to the urban zone, whereas the soils free of pollution were mainly distributed in the southwestern part. The soils with potential risk of heavy metal pollution were located in isolated spots mainly in the northern part and southeastern corner of the study region. The FCM algorithm combined with geostatistical techniques, as compared to conventional single geostatistical kriging methods, could produce a prediction with a quantitative uncertainty evaluation and higher reliability. Successful prediction of soil pollution achieved with FCM algorithm in this study indicated that fuzzy set theory had great potential for use in other areas of soil science.     

中国水稻土磷储量及其空间分异

Due to the growing concern about the agricultural phosphorus (P) losses pollution, an in-depth understanding of P in paddy soils of China would be helpful in providing a national perspective of the environmental impact of P cycling and fertility on China’s farms. In this study, we evaluated the P storage and the P density of paddy soils in China, characterized the spatial variations of P among the subgroups of paddy soils and soil regions in China, and evaluated the P data using GIS-based analysis, which included a newly compiled 1:1 M digital soil map of China, and using 1 490 soil profiles. The available and total P densities of paddy soils were 6.7 and 698.5 g m-3, respectively. Overall in China, the total P storage within 1 m of paddy soils was estimated to be 330.1 Tg. The P density of paddy soils varied substantially with subgroups due to the different soil water regimes such as groundwater table and soil drainage. The P availability in paddy soils, especially in surface layer, was higher in high temperature and precipitation areas. Further research is needed to examine more anthropogenic impact factors, such as increasing use of chemical fertilizer.     

福建省变性土的性质、形成和肥力

The zonal soils in the south subtropical zone of Fujian are lateritic red soils.A type of dark clayey soils.which was historically defined as lateritic red soils,derived from weathering products of the basalts was indicated by the investigation results to be markedly different from lateritic red soils and could be classified as Typical Hapluderts.They are distributed as complex zones with the lateritic red soils.The vertisols in this region were considered as a type of lithogenic soils and the vertic characteristics delay and inhibit the soils from allitic processes and then formed an independent soil type.The vertisols have higher fertility and better agricultural production characters than the lateritic red soils.The different ways in utilizing and managing these soils according to their properties and fertility are also suggested.     

蚯蚓与黑麦草相互作用对土壤中荧蒽去除的影响

Earthworms can promote the bioremediation of contaminated soils through enhancing plant growth and microorganism development. The individual and combined effects of earthworms and ryegrass (Lolium multiflorum Lam.) on the removal of fluoranthene from a sandy-loam alluvial soil were investigated in a 70-d microcosm experiment. The experiment was set up in a complete factorial design with treatments in four replicates: without earthworms or ryegrass (control, CK), with earthworms only (E), with ryegrass only (P), and with both earthworms and ryegrass (EP). The residual fluoranthene, microbial biomass C, and polyphenol oxidase activity in the soil changed significantly (P<0.01) with time. In general, the residual concentration of fluoranthene in the soil decreased sharply from 71.8-88.7 to 31.7-37.4 mg kg 1 in 14 d, and then decreased gradually to 19.7-30.5 mg kg 1 on the 70th d. The fluoranthene concentration left in the soil was the least with both earthworms and ryegrass, compared to the other treatments at the end of the experiment. Half-life times of fluoranthene in the E, P, and EP treatments were 17.8%-36.3% smaller than that of CK. More fluoranthene was absorbed by earthworms than ryegrass. However, the total amounts of fluoranthene accumulated in both the ryegrass and earthworms were small, only accounting for 0.01%-1.20% of the lost fluoranthene. Therefore, we assumed that microbial degradation would play a dominant functional role in fluoranthene removal from soil. We found that earthworms significantly increased microbial biomass C and polyphenol oxidase activity (P<0.01) in the presence of ryegrass at the end of the experiment. Furthermore, microbial biomass C and polyphenol oxidase activity were significantly (P<0.05) and negatively related to the residual fluoranthene concentration. This implied that earthworms might promote the removal of fluoranthene from soil via stimulating microbial biomass C and polyphenol oxidase activity.     

Prediction of Polycyclic Aromatic Hydrocarbon Bioaccessibility to Earthworms in Spiked Soils by Composite Extraction with Hydroxypropyl-β-Cyclodextrin and Organic Acids

Traditional exhaustive extraction methods often overestimate the risk of polycyclic aromatic hydrocarbon(PAH) bioaccessibility to biota. Therefore, reliable assessment methods need to be established. In this study, a composite extraction with hydroxypropyl-β-cyclodextrin(HPCD) and three low-molecular-weight organic acids, oxalic acid(OA), malic acid(MA), and citric acid(CA), was used to predict the PAH bioaccessibility to earthworms, subjecting to two soils(red soil and yellow soil) spiked with selected PAHs,phenanthrene, pyrene, chrysene, benzo(a)anthracene, benzo(b)fluoranthene, benzo(k)fluoranthene, and benzo(a)pyrene. For both soils,concentrations of PAHs by composite extraction using HPCD-OA(R~2= 0.89–0.92, slope = 1.89–2.03; n = 35), HPCD-MA(R~2=0.92–0.96, slope = 1.43–1.67; n = 35), and HPCD-CA(R~2= 0.92–0.96, slope = 1.26–1.56; n = 35) were significantly correlated with PAH accumulation in the Eisenia fetida earthworms. Moreover, the HPCD-CA-and HPCD-MA-extracted PAH concentrations were closer to the earthworm-accumulated PAH concentration than the extraction using just HPCD. The results indicated that the composite extraction could improve the prediction of PAH bioaccessibility, and therefore can serve as a reliable chemical method to predict PAH bioaccessibility to earthworms in contaminated soils.     

中国太原市农业土壤的重金属污染状况

To evaluate the current state of the environmental quality of agricultural soils in Taiyuan City, a hotspot for China’s industrial development, the concentrations of 8 heavy metals in soils were investigated by means of extensive sampling in farmlands, forestlands, and grasslands in the city. Statistical analyses and spatial distribution maps were used to identify the most significant heavy metal pollutants. The mean concentrations of As, Cd, Cu, Hg, Pb, Zn, Ni, and Cr were slightly higher than their background values in Taiyuan’s topsoil, but were lower than the maximum permissible concentrations in the Chinese Environmental Quality Standard for agricultural soils. Farmland soils in Taiyuan had the highest average Cd, Cu, Hg, Pb, Zn, and Cr concentrations, but the As and Ni concentrations did not differ significantly among the farmland, forestland, and grasslands. Soil contamination by Cd, Cu, Hg, Pb, Zn, and Cr was mainly derived from farming practices, especially the use of sewage water for irrigation. In contrast, As and Ni might derive mainly from the soil parent material. The identification of heavy metal sources in agricultural soils may provide a basis for taking appropriate action to protect soil quality.     

Occurrence of polycyclic aromatic hydrocarbons in the estuarine sediments of the Taihu Lake and their associated toxic effects on aquatic organisms

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous toxic organic pollutants in the natural environment that are strongly associated with socioeconomic activities. Exploring the distribution, sources, and ecological toxicity of PAHs is essential to abate their pollution and biological risks. The 16 priority PAHs in different lakeside city estuarine sediments in the northern Taihu Lake in China were determined using gas chromatography-mass spectrometry. Results showed that total concentrations...     

Persistent Organic Pollutants in Singapore's Coastal Marine Environment: Part I,Seawater

Persistent organic pollutants (POPs) continue to receive widespread attention as harmful contaminants in the global environment. Increasingly, there have been concerns regarding adverse effects on marine wildlife due to the potential of POPs to induce adverse health effects, including the disruption of endocrine systems. Marine water samples within one kilometer of the coastline of Singapore were analysed to determine prevalent concentrations of a range of persistent organic pollutants (POPs). Samples were collected from 0.5 m and mid-depth (approximately 14 m depth) at twenty-two locations. POPs analysed are classed as USEPA priority pollutants, and included: sixteen polycyclic aromatic hydrocarbons (PAHs); eight polychlorinated biphenyls (PCBs); and twelve organochlorine pesticides (OCPs). Total PAH concentrations varied from 88.44 to 1419.57 ng l^-1 at the surface, and 129.78 to 940.41 ng l^-1 at mid-depth. Total OCP concentrations varied between 4.90 ng l^-1 to 22.04 ng l^-1 at surface, and 4.09 to 18.05 ng l^-1 at mid-depth. Total PCB concentrations varied from 0.22 ng l^-1 to 20.41 ng l^-1 at surface and 0.4 to 10.79 ng l^-1 at mid-depth. In general, the distribution profile shows that the surface concentrations of POPs are higher than at mid depth. Concentrations of PAHs were considered higher than reported levels for several other countries, whereas levels of OCPs and PCBs are generally lower than reported levels for other Asian countries.     

Influence on Polychlorinated Biphenyls Content Using Three Types of Biowastes As Fertilizers In Agricultural Soils

A 4-year field study was carried out to investigate the effects of three types of biowastes application on PCB accumulation in agricultural soils. This study was based on the experiments designed for four soils in two areas of Palencia province (Spain) (Cerrato and Tierra de Campos) for non irrigated and irrigated land after applying biowaste. The amounts of the three different types of biowastes added were determined according to the fertilization needs of nitrogen for the crop. The concentrations of PCBs in soils were determined before and after biowaste application. The three biowaste treatments raise the concentration of PCBs in the soil, sewage sludge compost (SC) treatment produced the main increase in PCBs concentration, followed by municipal solid waste compost (MC) treatment and the dehydrated sewage sludge (SD) treatment. The values of biowaste treated areas were 3.7-11.5 times higher than the respective values of the non treated areas. Changes observed in the congener distribution also suggest the influence of the biowaste on the soil. The biowaste used had an average PCBs concentration of 63.16 ng g^?1 with a range from 34.08 ng g^?1 to 118.93 ng g^?1, which are values below the EEC recommended limit (800 ng g^?1). In the soils without treatment was found an average concentration 0.206 ng g^?1 of PCBs, typical of areas with low levels of environmental pollution.     

Characterization and Sources of PAHs and Potentially Toxic Metals in Urban Environments of Sevilla (Southern Spain)

The purpose of this study was to determine the degree of PAH contamination and the association of PAHs with metals in urban soil samples from Sevilla (Spain). Fifteen polycyclic aromatic hydrocarbons-PAHs (naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenzo[a,h]anthracene, benzo[g,h,i]perylene, indeno[1,2,3-c,d]pyrene) and seven metals (Cd, Cr, Cu, Mn, Ni, Pb, Zn) have been evaluated in representative urban soil samples. Forty-one top soils (0–10 cm) under different land use (garden, roadside, riverbank and agricultural allotment) were selected. PAHs from soil samples were extracted by sonication using dichloromethane. The simultaneous quantification of 15 different PAH compounds were carried out by HPLC using multiple wavelength shift in the fluorescence detector. For qualitative analysis a photo diode-array detector was used. Metal (pseudo-total) analysis was carried out by digestion of the soils with aqua regia in microwave oven. The mean concentration of each PAH in urban soils of Sevilla showed a wide range, they are not considered highly contaminated. The results of the sum of 15 PAHs in Sevilla soils are in the range 89.5–4004.2 μg kg^?1, but there seems not to be a correlation between the concentration of PAHs and the land use. Of the 15 PAHs examined, phenanthrene, fluoranthene and pyrene were present at the highest concentrations, being the sum of these PAHs about 40% of the total content. Although metal content were not especially high in most soils, there are significant hints of moderate pollution in some particular spots. Such spots are mainly related with some gardens within the historic quarters of the city. The associations among metals and PAHs content in the soil samples was checked by principal components analysis (PCA). The largest values both for ‘urban’ metals (Pb, Cu and Zn) and for PAHs were mainly found in sites close to the historic quarters of the city in which a heavy traffic of motor vehicles is suffered from years.     

Particle-associated Polycyclic Aromatic Hydrocarbons in the Atmosphere of Hong Kong

Polycyclic aromatic hydrocarbons (PAHs) in total suspended particulates (TSP) collected at six rural and urban stations in Hong Kong from 1993–1995 using high volume air samplers were identified using GC-MS (gas chromatography-mass spectrometry). The results showed that the PAHs exhibited distinct spatial and seasonal variability. The total PAH content (ΣPAH) in the samples ranged from 0.41 to 48 ng m^-3. The unsubstituted analogs are the characteristic products of high temperature combustion processes. The highest average ΣPAH was measured at the street-level station in Mong Kok indicating that vehicles were high PAHs contributors. The rural station at Hok Tsui exhibited the lowest PAH level, however; influences of city plumes could be seen when northerly or northeasterly winds prevailed in the winter. All stations experienced the highest loading of PAHs in autumn and the lowest in summer; the former was 2.8 times greater than the latter. This seasonal variability is due to the Asian monsoon system, precipitation, micrometeorology, and the rate of photodegradation. In summer, Hong Kong experiences relatively clean oceanic air and high rates of precipitation and photodegradation, while upon the onset of the winter monsoon, local air mass is replaced by polluted air streams from the Asian continent. Benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(e)pyrene, indeno(1,2,3-cd)pyrene and benzo(ghi)perylene were the dominant species in the samples. The PAH distribution patterns at different stations were similar within each season. However, seasonal variations existed. For example, phenanthrene contributed up to 14% of the total PAH in summer, while the dominance of benzo(b)fluoranthene, benzo(k)fluoranthene was more significant in autumn and winter.     

Polycyclic aromatic hydrocarbons in green space soils in Shanghai: source,distribution, and risk assessment

Purpose

The purpose of this study is to study the major sources, concentrations, and distributions of polycyclic aromatic hydrocarbons (PAHs) in three different types of green space in Shanghai. In addition, we will quantitatively assess the burden of PAHs in the soil, as well as the potential carcinogenic risk of PAHs in humans. These results will provide valuable information for soil remediation and human health risk management.

Materials and methods

A total of 166 surface soil samples were collected in parks, greenbelts, and woodlands. Soils were extracted using accelerated solvent extraction (ASE). PAHs were analyzed by gas chromatography-mass spectrometry (GC-MS). The positive matrix factorization (PMF) model was used to identify major PAH emission sources and quantitatively assess their contributions to PAHs. The incremental lifetime cancer risk (ILCR) was used to quantify the potential health risk of PAHs.

Results and discussion

The average concentrations of ∑15 PAHs are 227?±?95 ng g^?1, 1632?±?251 ng g^?1, and 1888?±?552 ng g^?1 in the woodland, park, and greenbelt soils, respectively. The PMF results show that biomass (33%), coal (21%), vehicles (17%), natural gas (14%), oil (9%), and coke (7%) are the dominant sources of PAHs in the park soils. Diesel (40%), tire debris (30%), biomass (15%), gasoline (9%), and oil (5%) are the main sources in the greenbelt soils. Biomass (48%), vehicles (37%), and coal (15%) are the main sources in the woodland soils. The ILCRs of adults and children who are exposed to PAHs in soils range from 9.53?×?10^?8~1.42?×?10^?5.

Conclusion

In three types of green space in Shanghai, the dominant PAHs are high–molecular weight (HMW) compounds (≥?4 rings). This may be due to the proximity of the sampling site to emission sources. In addition, low–molecular weight (LMW) PAHs (with 2–3 rings) are relatively unstable, and these compounds are prone to volatilization and degradation. Source identification indicates that biomass combustion is the most dominant PAH source in the park and woodland soils, while vehicles are the dominant PAH source in the greenbelt soils. The ILCRs of adults and children indicate potential health risks, and children have a greater health risk than adults.

     

SYNOPSIS Polycyclic Aromatic Hydrocarbons (PAHs) in Soil — a Review

PAHs are mainly produced by combustion processes and consist of a number of toxic compounds. While the concentrations of individual PAHs in soil produced by natural processes (e.g., vegetation fires, volcanic exhalations) are estimated to be around 1—10 μg kg⁻¹, recently measured lowest concentrations are frequently 10 times higher. Organic horizons of forest soils and urban soils may even reach individual PAH concentrations of several 100 μg kg⁻¹. The PAH mixture in temperate soils is often dominated by benzofluoranthenes, chrysene, and fluoranthene. The few existing studies on tropical soils indicate that the PAH concentrations are relatively lower than in temperate soils for most compounds except for naphthalene, phenanthrene, and perylene suggesting the presence of unidentified PAH sources. PAHs accumulate in C‐rich topsoils, in the stemfoot area, at aggregate surfaces, and in the fine‐textured particle fractions, particularly the silt fraction. PAHs are mainly associated with soil organic matter (SOM) and soot‐like C. Although the water‐solubility of PAHs is low, they are encountered in the subsoil suggesting that they are transported in association with dissolved organic matter (DOM). The uptake of PAHs by plants is small. Most PAHs detected in plant tissue are from atmospheric deposition. However, earthworms bioaccumulate considerable amounts of PAHs in short periods. The reviewed work illustrates that there is a paucity of data on the global distribution of PAHs, particularly with respect to tropical and southern hemispheric regions. Reliable methods to characterize bioavailable PAH pools in soil still need to be developed.     

Gehalte an Polycyclischen Aromatischen Kohlenwasserstoffen (PAK) und deren Verteilungsmuster in unterschiedlich belasteten Böden

Contents of polycyclic aromatic hydrocarbons (PAH) and their distribution pattern in soils with different contamination levels In order to study the PAH-contamination of soils in North Rhine Westfalia, soil samples were taken at different sites and analysed for six PAH. The sites were selected with regard to different forms of land use such as arable land and pastures in rural areas and gardens in urban areas and with regard to varying immission situations. The results are valued according to reference (RW) and test values (PW) of the Netherlands Guidelines for soil restoration. The reference values of these guidelines characterizing normal contents are regularly and in part distinctly exceeded for fluoranthene and benzo(a)pyrene at some sites (coking plant, alluvial meadow soils, allotment gardens, close to a highway). The check values which imply more exact investigations are only exceeded at the most contaminated site, a coking plant. The PAH patterns at the different sites investigated depend on the number and kind of PAH sources. PAH typical for motor vehicle emission (benzo(b)fluoranthene, benzo(g,h,i)perylene) are dominating in soils close to a highway, whereas at the cokery site fluoranthene can be found in higher concentrations than the other PAH. In alluvial river soils and in soils of allotment gardens the pattern is more uniform because of diffuse sources with decreasing contents in the order fluoranthene > benzo(a)anthracene > benzo(b) fluoranthene > benzo(g,h,i)perylene > benzo(a)pyrene > benzo(k)fluoranthene. As a guide substance for a first risk assessment benzo(a)pyrene is suitable, since its content shows a strong correlation to the sum of five other PAH. In order to characterize the background contamination of soils with PAH new reference values are proposed.     

Long-Range Atmospheric Transport and Local Pollution Sources on PAH Concentrations in a South European Urban Area. Fulfilling of the European Directive

A 12 months study on urban atmospheric concentrations of polycyclic aromatic hydrocarbons (PAH) contained in the particulate matter with an aerodynamic diameter less than or equal to 10 microns (PM10) was carried out in Zaragoza (Spain) from July 12th, 2001 to July 26th, 2002 by using a high-volume air sampler able to collect the PAH supported on a Teflon-coated fibre glass filter. Samples were analysed by using Gas Chromatography Mass Spectrometry (GC-MS/MS). PAH of high molecular weight, indeno[1,2,3-cd]pyrene (IcdP), benzo[g,h,i]perylene (BghiP) and coronene (Co) were the most abundant compounds. The concentrations of benz[a]pyrene equivalent carcinogenic power (BaP-eq) showed a mean value of 0.7 ng/m³ with 22.5% of the samples exceeding the 1.0 ng/m³ guide value established by the European Directive. These episodes were mainly produced during cold season. Regarding meteorological variables, a positive effect of the prevalent wind “cierzo” (NW direction) over the Zaragoza city was confirmed from the environmental point of view. The NE, E and S directions, corresponding to highway and industrial areas were the directions showing the high PAH atmospheric concentrations. Despite the proximity of a high-level traffic highway, stationary sources related to industry were the dominant source of PAH in the sampled area. Vehicular emissions and natural gas home heating also contributed to PAH concentrations. The predominance of local pollution sources versus long-range transport on PAH concentrations was shown. However, the contribution of long-range transport of anthropogenic origin from other European areas was reflected for specific dates on PAH concentrations and PM10 levels.