Preparation,composition, structure and properties of the <Emphasis Type="Italic">Kosteletzkya virginica</Emphasis> bast fiber

In this paper, the bast of the Kosteletzkya virginica are degummed and separated into fine fibers, the chemical composition, morphology, microstructure and mechanical properties of the Kosteletzkya virginica bast fibers are characterized by means of SEM, ART-FTIR, DSC-TGA, XRD and Instron tensile tester. The results show that the surface of the Kosteletzkya virginica bast fibers is smooth, and there are many visible grooves along the vertical section. Typical cellulose I in the Kosteletzkya virginica bast fibers is confirmed by FTIR and XRD analysis. The crystallinity of the Kosteletzkya virginica bast fibers is higher than that of the cotton fibers and lower than that of the castor-oil plant bast fibers. The beginning and maximum decomposition temperature of the Kosteletzkya virginica bast fibers are 252 and 347 °C respectively, which indicate that the Kosteletzkya virginica bast fibers have an appropriate thermal stability. The Kosteletzkya virginica bast fibers have a better mechanical properties and excellent hygroscopicity. All the results show that the Kosteletzkya virginica bast fiber is one of an ideal candidate for the new textile material.     

Preparation and antibacterial property of the mulberry based textiles

The mulberry based textile products were prepared by means of degumming, dyeing, spinning and weaving using mulberry bark as raw materials. The structure of the mulberry based textiles was characterized by scanning electron microscope (SEM). The antibacterial property of the mulberry fibers was evaluated by means of antibacterial testing, and the antibacterial composition in the mulberry based textiles was investigated by FTIR and ¹³C-NMR. The results show that the mulberry based fibers, dyed fibers, yarns and fabrics with high quality can be prepared successfully by the above processes. The mulberry based textiles have excellent antibacterial property. The inhibitory rate of raw mulberry bark on Escherichia coli and Staphylococcus aureus is (67.2±3.1)% and (53.8±4.6)% respectively, and the inhibitory rate of mulberry fiber on Escherichia coli and Staphylococcus aureus is both above 80%. The inhibitory rate of the mulberry/cotton blended yarn on Escherichia coli and Staphylococcus aureus ranges from (51.7±5.1)% to (72.4±4.1)%, which has similar inhibitory rate with the mulberry/cotton blended fabric. The results of Fourier Transform-Infrared (FTIR) and ¹³C-nuclear magnetic resonance (¹³C-NMR) show that the typical functional group (hydroxyl, carbonyl, double bond and epoxy bond) exist in the composition of the mulberry fiber, which indicates that the flavones and phenolic compounds including in the mulberry fiber.     

Effect of surface treatment on the structure and properties of para-aramid fibers by phosphoric acid

The surface of para-aramid fiber was modified by phosphoric acid solutions (H3PO4) based on an orthogonal experimental design and analysis method. Statistical results indicate that treatment temperature is the most significant variable in the modification processing, while treatment time was the least important factor. The structure and morphology of the modified fiber were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction instrument (XRD), and scanning electron microscope (SEM). The results showed that some polar groups were introduced into the molecular structure of aramid fibers and the physical structure of the treated fibers was not etched obviously. The interfacial properties of aramid fiber/epoxy composites were investigated by the single fiber pull-out test (SFP), and the mechanical properties of aramid fibers were investigated by the tensile strength test. The results showed that the interfacial shear strength (IFSS) of aramid/epoxy composites was remarkably improved and the breaking strength of aramid fibers was not affected appreciably after surface modification.     

Chemical compounds and antimicrobial activity of volatile oils from bast and fibers of <Emphasis Type="Italic">Apocynum venetum</Emphasis>

Sixty-one and forty-four compounds were identified from the volatile oils of the bast and fibers of Apocynum venetum by means of gas chromatography-mass spectrometry (GC-MS), respectively. The fatty acids, esters, ketones, aldehydes, alkanes, phenols, and miscellaneous compounds were found as the major components in both samples. Furthermore, both of volatile oils exhibited antibacterial properties against Staphylococcus aureus, Staphyloccus epidermidis, and Escherichia coli, whereas they showed weak inhibitory effects on Bacillus lentus and Candida albicans. These results confirmed the claim that A. venetum fibers have antibacterial properties and provide theoretical foundation to make better use of A. venetum fibers.     

Application of <Emphasis Type="Italic">Sterculia Foetida</Emphasis> Fruit Shell Waste Biomolecules on Silk for Aesthetic and Wellness Properties

There has been growing interest in the use of bioresource waste for natural dyeing and finishing. This paper discusses dye extraction from the novel source fruit shell waste of Sterculia foetida and its application on mulberry silk fabric to confer aesthetic coloration and wellness properties such as ultra-violet (UV) protection and antibacterial properties. Treated fabrics showed a substantial increase in color depth and adequate wash, light, and rubbing fastness properties for dyed silk fabrics with and without mordanting. Pre-and post-mordanting of silk fabrics were carried out using mordants such as alum, harda (myrobalan), and copper sulfate. UV-visible spectrophotometric analysis of fruit shell extract (FSE) at different pHs and FSE with three different mordants at neutral pH was used to understand the phenomena of dye-fiber interaction. The treated fabrics characterised by ATR-FTIR, SEM-EDS, and XRD analysis indicate the nature of dye fiber interaction justifying the multifunctional properties. The treated fabric also showed very good ultraviolet protection property and antibacterial properties both against S. aureus and E. coli bacteria even after ten washes. The results indicate that Sterculia foetida fruit shell extract offers an excellent potential as coloration, antibacterial, and ultraviolet protective agent for mulberry silk fabric.     

Fique fibers: Enhancement of the tensile strength of alkali treated fibers during tensile load application

Fique fibers were treated using Na(OH) solution at 5 w/v%, slack and under 1 N of tension, at room temperature, for 4 and 24 h respectively. Changes in their structure and composition were monitored using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). Additionally their mechanical properties were evaluated and analyzed. Results showed that tensile load application during alkali treatment improves their tensile strength and modulus. The most important change in mechanical properties was achieved in fibers treated for 24 h under tension. However, these fibers presented a high standard deviation; due to this treatment causing an important defibrillation. Moreover, fibers treated for 4 hours under tension, enhance their tensile strength around 56 %, while slack treated fibers improve only 38 %. When fibers were treated under tension, cellulose microfibrills were rearranged in the direction of tensile application and the spiral angle decreased, increasing the molecular orientation.     

Preparation and properties of antibacterial Poly(vinyl alcohol) nanofibers by nanoparticles

Poly(vinyl alcohol) (PVA)/Ag-zeolite nanofiber webs were prepared with different concentrations of Ag-zeolite nanoparticles by the electrospinning technique. Scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), transmission electron microscopy (TEM), Fourier transform-infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Instron, and antibacterial activities analysis were utilized to characterize the morphology and properties of the PVA/Ag-zeolite nanofiber webs. The study results showed that the polymer concentration, applied voltages and tip-to-collector distances were the main factors influencing the morphology of the electrospun nanofiber webs. The introduction of Ag-zeolite nanoparticles improved the mechanical properties and thermal stability of the PVA nanofiber webs. TEM data demonstrated that the Ag-zeolite nanoparticles were well distributed within the nanofiber. FTIR revealed a possible interaction between the PVA matrix and the Ag-zeolite nanoparticles. These fibers showed an antibacterial efficacy of 99.8 % and over against Staphylococcus aureus and Klebsiella pneumoniae at Ag-zeolite concentrations of 1 % and over, because of the presence of the silver nanoparticles in the zeolite.     

Microwave assisted fabrication of Nano-ZnO assembled cotton fibers with excellent UV blocking property and water-wash durability

Nano-ZnO assembled cotton fibers, with excellent UV blocking property and good water-wash durability, have been successfully fabricated using microwave assisted precipitation and crystallization process synchronously in situ for the first time. Here, zinc nitrate hexahydrate was used as zinc resource and sodium hydroxide was used as precipitate. The asobtained samples were characterized by powder X-ray diffractometer (XRD), filed emission scanning electron microscopy (FESEM), and energy-dispersive spectrometry (EDS), UV/Visible spectroscopy and Fourier transformation infrared spectroscopy (FTIR). Wurtzite ZnO with about 30–40 nm in diameter was fabricated in the lumen as well as in mesoporous structures of cotton fibers. The as-prepared samples have excellent UV absorbing activity over a broad range in the region from 225 nm to 380 nm. The crystallinity and UV blocking properties keep unchangeable as the former after being washed for 60 min in 33 l water. FTIR results reveal that there is no peak shift and new peak occurred, which indicates that no chemical bond exist between nano-ZnO and cotton fibers. Mechanical force is the only way to bond nano-ZnO to cotton fibers in the experimental condition. ZnO nanoparticles and wax existing in cotton fibers can combine to a firmly hybrid layer in the surface and the inner of cotton fibers during microwave treatment, which may bring the good water-wash durability.     

Surface morphologies and internal fine structures of bast fibers

Fiber surface morphologies and associated internal structures are closely related to its properties. Unlike other fibers including cotton, bast fibers possess transverse nodes and fissures in cross-sectional and longitudinal directions. Their morphologies and associated internal structures were anatomically examined under the scanning electron microscope. The results showed that the morphologies of the nodes and the fissures of bast fibers varied depending on the construction of the inner fibril cellular layers. The transverse nodes and fissures were formed by the folding and spiralling of the cellular layers during plant growth. The dimensions of nodes and fissures were determined by the dislocations of the cellular layers. There were also many longitudinal fissures in bast fibers. Some deep longitudinal fissures even opened the fiber lumen for a short way along the fiber. In addition, the lumen channel of the bast fibers could be disturbed or disrupted by the nodes and the spirals of the internal cellular layers. The existence of the transverse nodes and fissures in the bast fibers could degrade the fiber mechanical properties, whereas the longitudinal fissures may contribute to the very rapid moisture absorption and desorption.     

Low-temperature pyrolysis on jute fibers as a thermochemical modification method

Low-temperature pyrolysis up to 200, 250, 300 °C was conducted in order to remove non-cellulosic compounds without damaging the structure of the cellulose in jute fibers. The chemical, morphological, and mechanical aspects of prepared low-temperature pyrolyzed jute fibers were investigated by Fourier transform infrared (FTIR) spectroscopy, the wettability test in water/dichloromethane system, moisture content measurement, X-ray diffraction (XRD) analysis, scanning electron microscope (SEM), and tensile test using universal testing machine (UTM). It was confirmed that hydrophilic compounds including absorbed water, low molecular weight compounds such as waxes, hemicellulose, and lignin were largely removed from the fibers. Increasing amounts of non-cellulosic compounds were removed as the maximum pyrolysis temperature was increased. The degree of hydrophilic nature of jute fibers were reduced by low-temperature pyrolysis and thus water absorptivity of pyrolyzed jute fibers was reduced as maximum pyrolysis temperature increased. Furthermore, XRD analysis and morphological studies by SEM indicated that the crystalline structure of native cellulose was rarely damaged after pyrolysis up to 300 °C. In case of mechanical properties, breaking tenacity and breaking strain of the fibers decreased with increasing maximum pyrolysis temperatures because flaws formed on the surface of pyrolyzed jute fibers acted as weak-links. In agreement with predictions made according to Weibull’s weakest-link theory, it was found that shortened pyrolyzed jute fibers could have higher breaking tenacities compared with raw jute fibers of the same length. In addition, the compatibility with hydrophobic matrix was investigated by the mechanical properties of polypropylene (PP) reinforced with jute fibers. Consequently, it was hypothesized that low-temperature pyrolysis could be used to process raw jute fibers for use as short fiber reinforcements in fiber-polymer systems or be a simple and effective pretreatment method for a wide range of further chemical treatments.     

An investigation on the comparison of wet spinning and electrospinning: Experimentation and simulation

Polysulfonamide (PSA) has been widely used in many fields because of its excellent thermodynamic properties. In this study, PSA fibers were prepared separately via two different spinning ways, including conventional wet spinning and electrospinning. Fluid motion of wet spinning and electrostatic field of electrospinning were modeled using finite element analysis to investigate the spinning process. The properties of fabricated PSA fibers were characterized systematically by scanning electron microscope (SEM), fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), thermal gravity analysis (TGA) and electronic strength tester. Based on the simulation and theoretical analysis of spinning process, it was found that the extruding force of the wet spinning is larger than that of the electrospinning. The larger extruding force makes the alignment of macromolecules inside fiber relatively uniform, and a higher proportion of crystallization happens. Accordingly, the mechanical properties and thermal stability of PSA fibers could be improved due to a higher proportion of crystallization. The experimental results of mechanical strength and TG test are coincided with the simulation results. PSA fiber prepared by wet spinning has better thermal stability and mechanical properties than that fabricated by electrospinning.     

Effect of Silver Particle size on color and Antibacterial properties of silk and cotton Fabrics

In this study silver nanoparticles with different particle sizes and hence colors were synthesized on silk and cotton fabrics through reduction of silver nitrate. Particle sizes of the silver colloids were measured by dynamic light scattering (DLS). The structure and properties of the treated fabrics were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and UV-Vis reflectance spectroscopy. Various characteristics of the treated fabrics including antibacterial activities against a Gram positive (Staphylococcus aureus) and a Gram negative (Escherichia coli) bacteria, color effect, wash and light fastness, water absorption, fabric rigidity, and UV blocking properties were also assessed. The results indicated that the treated fabrics displayed different colors in the presence of silver nanoparticles with different particle sizes and exhibited good and durable fastness properties. Also, the size of the silver particles had a tangible effect on antibacterial activity of treated fabrics and its antibacterial performance was improved by decreasing the size of particles. Moreover, this process imparted significantly UV blocking activity to fabric samples.     

Nanofibrillation of cotton fibers by disc refiner and its characterization

Nanofibrils of cellulose were prepared from short staple cotton by refining process using a lab disc refiner that exerts a combination of shear and frictional forces. The nanofibrils were characterized by scanning electron microscope (SEM), atomic force microscope (AFM), X-ray diffractometer (XRD) and Fourier transform infrared spectroscopy (FTIR). From SEM and AFM, it was found that starting average diameter of the cotton fiber (∼25 μm) was reduced to 242 nm after 30 passes of refining. FTIR analysis revealed the increase in amorphous nature of cotton cellulose due to refining process. Supportively, XRD analysis showed a steady decline in percent crystallinity of the cotton fibers as the cotton fibres were passed through the refiner for more number of passes. Similarly, degree of polymerization (DP) was reduced from 2720 to 740 due to the refining process. Nanofibrils of cellulose from short staple cotton have a huge potential for application in nanofilters and as biodegradable fillers in nanocomposites.     

Synthesis,Characterization, and Antibacterial Activity of Cross-Linked Chitosan-Glutaraldehyde

This present study deals with synthesis, characterization and antibacterial activity of cross-linked chitosan-glutaraldehyde. Results from this study indicated that cross-linked chitosan-glutaraldehyde markedly inhibited the growth of antibiotic-resistant Burkholderia cepacia complex regardless of bacterial species and incubation time while bacterial growth was unaffected by solid chitosan. Furthermore, high temperature treated cross-linked chitosan-glutaraldehyde showed strong antibacterial activity against the selected strain 0901 although the inhibitory effects varied with different temperatures. In addition, physical-chemical and structural characterization revealed that the cross-linking of chitosan with glutaraldehyde resulted in a rougher surface morphology, a characteristic Fourier transform infrared (FTIR) band at 1559 cm⁻¹, a specific X-ray diffraction peak centered at 2θ = 15°, a lower contents of carbon, hydrogen and nitrogen, and a higher stability of glucose units compared to chitosan based on scanning electron microscopic observation, FTIR spectra, X-ray diffraction pattern, as well as elemental and thermo gravimetric analysis. Overall, this study indicated that cross-linked chitosan-glutaraldehyde is promising to be developed as a new antibacterial drug.     

Functional modification of wool fabric by thiol-epoxy click chemistry

The paper reports modification and characterization of wool fabrics achieved through thiol-epoxy click chemistry. A pretreatment with tris (2-carboxyethyl) phosphine (TCEP) as an effective reducing agent was carried out to produce thiol groups on wool surface. Glycidyl trimethyl ammonium chloride (GTAC) was later covalently bonded with wool fibers via thiol-epoxy reaction. The reaction was confirmed by SEM, FTIR, Raman and TG analysis. Antibacterial activity, antistatic property, hydrophilicity and dyeability of treated wool fabric were assessed. The results demonstrated that TCEP-GTAC treatment can endow wool fabric good antibacterial and antistatic properties as well as improved hydrophilicity. Tensile strength studies indicated fiber strength loss of ~12 % on modification.     

Synthesis and characterization of acrylic fibers with antibacterial silver nanoparticles

The present investigation reports the novel synthesis of acrylic fibers containing Ag nanoparticles under ultrasound irradiation. The effect of temperature and power of ultrasound irradiation in growth of the Ag nanoparticles were studied. The physicochemical properties of the nanoparticles were determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Results show a decrease in the particles size as the power of ultrasound irradiation decreased. Particle sizes and morphology of nanoparticles depend on temperature. As a result, an increase in temperature led to increase of particle size. The textile containing nanoparticles were tested for their antibacterial efficacy against E. coli and S. aureus and were found to possess significant antibacterial activity.     

Manufacture and performance of O-carboxymethyl chitosan sodium salt/cellulose fibers in N-methylmorpholine-N-oxide system

A series of O-carboxymethyl chitosan sodium salt (NaCMCh) with different degree of substitution (DS) of -CH₂COONa agent were successfully prepared by altering the reaction temperature and time. Both fourier transform infrared spectroscopy (FTIR) and ¹³C-Nuclear Magnetic Resonance (¹³C-NMR) were used to study the structure of NaCMCh. And the impact of DS on the antibacterial activity of NaCMCh was investigated. Then, the NaCMCh with optimal antibacterial activity was selected to prepare NaCMCh/cellulose fibers in N-methylmorpholine-N-oxide (NMMO) system. The structure, crystallization behavior, thermal property and morphology of obtained fibers were carefully studied with FTIR, Wide-angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermal gravimetric (TG) and scanning electron microscope (SEM), respectively. Meanwhile, the antibacterial activity as well as mechanical properties of resultant fibers was also investigated. The results demonstrated that the fibers had strong antibacterial activity against Escherichia coli (E. coli), acceptable mechanical properties and good water retention.     

Antimicrobial fibers based on chitosan and polyvinyl-alcohol

A series of antimicrobial fibers with different weight ratio of chitosan (CS) and polyvinyl alcohol (PVA) were fabricated via a primarily industrialized trail of wet-spinning method, and the morphology and structure of the resulting fibers were studied with the aid of scanning electron micrography (SEM), infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The CP60 blend fiber (60 % chitosan content) was confirmed as the best optimal sample among the blend fibers owing to strong intermolecular hydrogen bonds between PVA and chitosan and showed the maximum mechanical, antistatic, moisture absorption/desorption properties. The CP60 also exhibited good antimicrobial effects against Escherichia coli and Staphylococcus aureus as the chitosan fiber and could be recommended as the alternative material for the wound dressing and the food packing.     

Functional Antibacterial Finishing of Woolen Fabrics Using Ultrasound Technology

The growing concern for the personal health and hygiene has created the necessity of acquiring wool fabric antibacterial activity. Silicon dioxide nanoparticles (SiO₂ NPs) have appropriate features to enhance the functional properties of wool fabrics, especially with polymer application. In this study efficient coating using polyethylene glycol (PEG₂₀₀₀) and SiO₂ NPs were used for imparting antibacterial properties to treated fabrics. All the treatments were carried out using both conventional and ultrasound techniques. The physical and chemical properties were evaluated using FTIR, XRD, and SEM. The result indicated that treated wool fabrics by PEG/SiO₂ NPs improved the dyeability and antibacterial of the fabrics and also enhanced its mechanical properties. Furthermore, it is believed that the ultrasound radiation causes homogeneous distribution of cross-links and polymerization throughout the wool surface. This offers considerable advantages compared to conventional treatment.     

Multifunctionalised silk using <Emphasis Type="Italic">Delonix regia</Emphasis> stem shell waste

The use of natural dyes and natural finishes on textiles has become a matter of significant importance because of the increased environmental awareness to avoid some hazardous synthetic dyes and synthetic chemicals. The Delonix regia stem shells were extracted in distilled water methanol and ethanol solvents. Phytochemical analysis was carried out for the presence of bioactive chemical constituents such as saponin, terpenoid, flavonoid, glycoside, phenol and tannin using the standard procedure. All the tests showed positive for the presence of components except saponin in methanol and ethanol extract. The qualitative antibacterial analysis was done by AATCC 147 method with excerpts from three different solvents both against S. aureus (gram-positive) and E. coli (gram-negative) bacteria. Delonix regia stem shell extract (DSE) in distil water was used for natural dyeing of mulberry silk fabric. Pre-mordanting and post-mordanting of silk fabric were carried out using alum and myrobalan mordants. Treated fabrics showed a substantial increase in colour depth (K/S) and adequate wash, light and rubbing fastness properties without and with mordanted and dyed silk fabrics. Quantitative antibacterial analysis by AATCC 100 method was done on dyed silk fabric which showed very good resistance both against bacteria S. aureus and E. coli bacteria. Dyed silk fabric also showed good to very good ultraviolet (UV) protection property. The physicochemical composition of the untreated and without mordant treated silk fabrics were analysed by attenuated total reflection (ATR) Fourier transforms infrared (FTIR) spectroscopy, scanning electron microscope (SEM), energy dispersive spectrometry (EDS) and atomic absorption spectrophotometer (AAS). In addition to that wash, durability was also measured of dyed silk fabric for antibacterial and ultraviolet protection (UPF) properties according to AATCC 61 2A washing method.