Gas chromatographic determination of mecarbam and its metabolites mecarboxon, diethoate, and diethoxon in cottonseeds

A gas chromatographic method is described for determining residues of mecarbam and 3 of its metabolites, mecarboxon, diethoate, and diethoxon, in cottonseeds. For mecarbam analysis, following Soxhlet extraction with chloroform (after blending), the oily extract is partitioned with propylene carbonate and cleaned up on a silica gel column. Metabolites are extracted by the same method, followed by cleanup of mecarboxon on a silica gel column or diethoxon on an alumina column; cleanup of diethoate can be performed on either column. All 4 compounds are determined using a flame photometric detector equipped with a phosphorus filter. Average recoveries for cottonseed samples fortified with 0.03-1.0 ppm mecarbam ranged from 80 to 88%. Average recoveries were 81-88% for mecarboxon and 90-92% for diethoate (alumina column) and diethoxon from samples fortified with 0.05-1.0 ppm. Average recovery of diethoate from samples cleaned up on the silica gel column were 84-88% in the range of 0.05-0.2 ppm. Values obtained for mecarbam residues in field-treated samples are also presented.     

Development of a gas chromatographic method for fungicide cymoxanil analysis in dried hops

An analytical method for detecting cymoxanil [2-cyano-N-[(ethylamino)carbonyl]-2-(methoxyimino)acetamide] residues in dried hops was developed utilizing liquid-liquid partitioning, automated gel permeation chromatography (GPC), solid phase extraction (SPE) cleanup, and gas chromatography (GC). Method validation recoveries from dried hops were 96 +/- 12, 108 +/- 11, and 136 +/- 8% over three levels of fortification (0.05, 0.5, and 1.0 ppm, respectively). The hop samples from three field sites, which were treated with cymoxanil, had residue levels ranging from 0.146 to 0.646 ppm. The detection limit and the quantitation limit of the method developed in the present study were 0.022 and 0.050 ppm, respectively.     

Method for determination of organohalogen pesticide residues in vegetable oil refinery by-products

A method using gel permeation and Florisil column chromatographic cleanup techniques is described for determination of residues of nonpolar organohalogen pesticides and pesticide alteration products in vegetable oils and their refinery by-products. Supplemental Florisil separation and alkali cleanup techniques are used to facilitate determinations. Residues are determined with a 63Ni electron capture gas chromatographic detection system used in conjunction with 3 different gas chromatographic columns. Residue identities are confirmed by gas chromatography-mass spectrometry. Recoveries of 7 organohalogen pesticides, ranging from 90 to 103%, were determined by the supplemental Florisil separation technique to augment previously reported recovery data determined for initial GPC and Florisil cleanup steps. Soybean, peanut, and cottonseed deodorizer distillates and crude and refined oil, as well as additional refinery by-products, were analyzed. Nine to 13 organohalogen residues ranging from 0.5 to 6.3 ppm were determined in the 2 soybean deodorizer distillate samples used to develop and test the method. Identities of residues present at greater than or equal to 0.3 ppm were confirmed by gas chromatography-mass spectrometry. An intralaboratory trial of the method provided additional recovery and residue determination data as follows: Recoveries ranging from 102 to 116% were obtained for 4 pesticides added to peanut oil deodorizer distillate. Residues determined in 1 soybean deodorizer distillate sample supported previously obtained data for this sample.     

Determination of N-nitrosodimethylamine levels in some Canadian 2,4-D amine formulations

Levels of N-nitrosodimethylamine (NDMA) were determined in 112 samples of 2,4-dichlorophenoxyacetic acid, (2,4-D), formulated as the dimethylamine salt, collected over a 2 year period from products on the Canadian market. A sample aliquot is partitioned with dichloromethane, and the co-extracted dimethylamine is removed by cleanup on a silica gel column. The eluates containing NDMA are concentrated, an internal standard of N-nitrosodipropylamine is added, and nitrosamine levels are determined using a gas chromatograph interfaced with a thermal energy analyzer. Recoveries of NDMA and N-nitrosodiethylamine spiked into samples were 103 +/- 16 and 96.3 +/- 9.8%, respectively. Of the 112 samples analyzed, 92 were below 1 part per million (ppm) relative to the amount of 2,4-D in the samples, 16 were between 1 and 5 ppm, and 4 were greater than 5 ppm. The gas chromatographic column used is compared to a conventional packing material for volatile nitrosamine analysis. Formation of NDMA during cleanup and analysis was shown not to occur.     

Determination of chlorinated methylthiobenzenes and their sulfoxides and sulfones in fish

A procedure was developed to determine chlorinated methylthiobenzenes and their respective sulfur oxidation products in fish. Perch samples fortified at the 0.1 ppm level with 2,4,5-trichloromethylthiobenzene, pentachloromethylthiobenzene, and their sulfoxides and sulfones were extracted and cleaned up using an adaptation of the official AOAC method for multiple residues of organochlorine pesticides. The Florisil column cleanup was modified; 200 mL 6% petroleum etherethyl ether eluted the methylthiobenzenes, 200 mL 50% PE-EE eluted the sulfones, and 200 mL EE eluted the sulfoxides. Recoveries determined by electron capture (ECD) gas chromatography (GC) were 75-101% for the methylthiobenzenes and their sulfones and 63-93% for the sulfoxides. Co-extracted materials in the Florisil eluates that interfered with the ECD/GC quantitation were removed by partitioning the sulfoxides and sulfones into sulfuric acid and by thin layer chromatography on silica gel, using methylene chloride-hexane (50 + 50) as the developing solvent. Seven fish samples containing residues of chlorinated benzenes or polychlorinated biphenyls (PCBs) were examined for chlorinated methylthiobenzenes, methylthio-PCBs, and their oxidation products by matching GC retention times obtained with the EC detector and a flame photometric detector operated in the sulfur mode. These analytes were not found in the fish samples above a detection level equivalent to 0.02 ppm 2,4,5-trichloromethylthiobenzene.     

Determination of polybrominated biphenyl residues in dairy products.

A method for the determination of polybrominated biphenyls (PBBs) in dairy products is described. Fat is extracted from the products by the official AOAC method. The PBB residues are separated from the fatty material by gel permeation chromatography prior to gas-liquid chromatographic (GLC) quantitation. An additional cleanup using petroleum ether elution through a miniature Florisil column is necessary for thin layer chromatographic (TLC) confirmation. Recoveries of PBBs from samples fortified at levels from 0.1 to 0.5 ppm ranged from 94 to 104% with an average of 99%. GLC sensitivity permits the estimation of PBB residue levels as low as 0.007 ppm. Routine TLC confirmation is limited by sensitivity to greater than or equal to 0.2 ppm.     

New method for the determination of 1,1-dimethylhydrazine residues in apples and peaches

A new method for determining 1,1-dimethylhydrazine (UDMH) in peaches and apples is presented. The method consists of extraction with L-ascorbic acid, derivatization with 2-nitrobenzaldehyde to the corresponding hydrazone, and cleanup on an alumina column. The hydrazone derivative is determined by gas chromatography using an electron-capture detector. Recoveries were determined from 10 to 100 ppb. Stability of the UDMH residues on frozen peaches was investigated, and results indicate that the residues degrade even while frozen.     

Electron capture gas-liquid chromatographic method for the simultaneous analysis of 2,4-D, dicamba, and mecoprop residues in soil, wheat, and barley.

A method has been developed for the simultaneous analysis of 2,4-D (2,4-dichlorophenoxy-acetic acid), dicamba (2-methoxy-3,6-dichloro-benzoic acid), and mecoprop (MCPP; 2-[(4-chloro-o-tolyl) oxy] propionic acid) residues in soil, wheat, and barley. Soil and crop samples are extracted with acidic acetone and methanol, respectively. The extracts in diethyl ether are esterified with diazomethane and cleaned up by passing through a Florisil column. Extracts are analyzed by gas-liquid chromatography, using an electron capture detector to determine 2,4-D and dicamba residues. Mecoprop in the extract is not detected at low levels of concentration. However, bromination of the extract increases the response of the electron capture detector to mecoprop. The method is sensitive to about 0.05 ppm 2,4-D and dicamba and 0.5 ppm mecoprop. Recoveries of these 3 herbicides added to soil, wheat, and barley samples at 0.05, 0.1, 0.5, and 1.0 ppm levels were between 65 and 93%. The method was used for the simultaneous analysis of 2,4-D, dicamba, and mecoprop residues in wheat, barley, and soil samples obtained from fields sprayed with the herbicide formulation Kil-Mor.     

Improved method for determination of chlorothalonil and related residues in cranberries

Tetrachloroisophthalonitrile (chlorothalonil) was applied under controlled conditions in 1985 to a cranberry bog for fungus control and for residue studies. Randomly selected samples of cranberries were analyzed for residues of chlorothalonil, its metabolite 4-hydroxy-2,5,6-trichloroisophthalonitrile, hexachlorobenzene, and pentachlorobenzonitrile by extraction, methylation, Florisil column cleanup, and electron capture gas chromatography. Because of interferences in the GC determinative step, previously reported methodology was modified. The total residues found in the test samples were well below the permissible limit for the parent and related compounds.     

Analysis of O,S-dimethyl hydrogen phosphorothioate in urine, a specific biomarker for methamidophos

A rugged and sensitive method was developed to monitor urinary concentrations of O,S-dimethyl hydrogen phosphorothioate (O,S-DMPT), a specific biomarker of exposure to the organophosphate insecticide methamidophos. After pH adjustment and C18 solid phase extraction column cleanup, the urine was lyophilized at a low temperature to prevent loss of possibly highly volatile and unstable O,S-DMPT metabolite. The dried residue was derivatized using N-methyl-N-(tert-butyldimethylsilyl)trifluoroacetamide and 1% tert-butyldimethylchlorosilane (MTBSTFA + 1% TBDMCS) in acetonitrile. After it was filtered, the derivatized product was analyzed and quantified by gas chromatography using a pulse flame photometric detector specific for phosphorus compounds. The limit of detection for this method was 0.004 ppm with a limit of quantitation of 0.02 ppm of urine. The mean recovery value for O,S-DMPT from 17 urine samples fortified at varying concentrations was 108% with a standard deviation of 12%.     

Improved gas chromatographic method for determination of daminozide by alkaline hydrolysis and 2-nitrobenzaldehyde derivatization and survey results of daminozide in agricultural products

An improved method was developed for the quantitative determination of daminozide. This new method combines the alkaline hydrolysis and distillation steps of the PAM II method for daminozide with the derivatization, cleanup, and gas chromatographic determination steps of the Wright method for unsymmetrical dimethyl hydrazine (UDMH). The minimum detectable level is 0.05 ppm. Recoveries range from 85 to 110% when daminozide is added at 0.1 to 1.0 ppm, and are generally 40% at the 0.05 ppm level. A variety of domestic and imported products were analyzed by this improved method and daminozide was detected in 33 of the 98 samples analyzed. Levels detected ranged from a trace amount to 0.80 ppm. The identity of UDMH hydrazone was confirmed by mass spectrometry in many samples, thus confirming the presence of daminozide. Two samples containing daminozide were analyzed independently by a second laboratory and the findings were closely duplicated.     

Determination of chlorinated pesticide residues in foods. II. Simultaneous analysis of chlorinated pesticide and phthalate ester residues by using AgNO3-coated Florisil column chromatography for cleanup of various samples.

A simplified method suitable for simultaneous analysis of chlorinated pesticide and phthalate ester residues in various foods was developed. Chemical residues were quantitatively extracted from fatty and vegetable samples with acetonitrile as follows: Chemical standard in 0.5 mL ethanol solution was added to 10 g homogenized sample. After 3 hr, pork and beef were extracted 3 times with 20 mL portions of acetonitrile. The acetonitrile layers were diluted with water and extracted with n-hexane. Rice samples were combined with 10 mL water, 5 mL acetonitrile and 1 mL ethanol and extracted 3 times with 20 mL portions of n-hexane. The n-hexane concentrate from each sample was submitted to AgNO3-coated Florisil column chromatography. The AgNO3 coating adequately adsorbed interfering coextractives. Extracts of fish and vegetable samples were separated into 2 fractions by the above column chromatography. Supplemental cleanup procedures were also developed to accurately determine phthalate esters eluted in the second fraction. Satisfactory gas chromatograms were obtained for most samples.     

High pressure liquid chromatographic determination of methomyl and oxamyl on vegetable crops

A reverse phase high pressure liquid chromatographic method is presented for the separation and determination of residues of the carbamates oxamyl and methomyl on vegetables. A liquid-liquid extraction and cleanup procedure is applied to the vegetable extract. Samples are eluted from a muBondapak C18 column and quantitated by ultraviolet absorbance at 240 nm. Recovery data for vegetable samples spiked at 2 ppm are presented.     

Determination of daminozide in apples by gas chromatography/chemical ionization mass spectrometry

A method using gas chromatography/chemical ionization mass spectrometry (GC/CIMS) for the determination of daminozide residues in apples has been developed. Daminozide was separated from the sample matrix by water extraction and cation exchange, converted to the methyl ester by treatment with HCl-methanol, and determined by GC/CIMS using succinonitrile as an internal standard. The detection level was 0.05 ppm. Recoveries were 92-104% from apples spiked at the 0.05-0.5 ppm levels. Of the 25 apple samples analyzed, only 2 were positive for daminozide (1.04 and 0.32 ppm).     

Gas-liquid chromatographic determination of famphur and its oxygen analog in tissues of reindeer and cattle.

A gas chromatography equipped with a flame photometric detector operating in the phosphorus mode provided a sensitive method for determining residues of famphur, O,O-dimethyl O-[p-(dimethylsulfamoyl)phenyl]phosphorothioate, and its oxygen analog in reindeer and cattle tissues. With extraction and cleanup, 0.025 ppm famphur and 0.06 ppm oxygen analog could be detected in the body tissues. Recoveries of 73-100% were obtained from fat, muscle, liver, and kidney.     

Gas chromatographic determination of captan, folpet, and captafol residues in tomatoes, cucumbers, and apples using a wide-bore capillary column: interlaboratory study.

An interlaboratory study of the determination of captan, folpet, and captafol in tomatoes, cucumbers, and apples was conducted by 4 laboratories using wide-bore capillary column gas chromatography with electron capture detection. The 3 fungicides were determined using the Luke et al. multiresidue method modified to include additional solvent elution in the optional Florisil column cleanup step used with this method. The crops were fortified with each fungicide at 3 levels per crop. Mean recoveries ranged from 86.2% for a 25.1 ppm level of captan in apples to 115.4% for a 0.288 ppm level of captafol in apples. Interlaboratory coefficients of variation ranged from 3.4% (24.7 ppm folpet) to 9.7% (0.243 ppm captafol) for tomatoes; from 2.8% (2.0 ppm captafol) to 8.2% (24.8 ppm captan) for cucumbers; and from 1.5% (0.234 ppm folpet) to 22.1% (0.266 ppm captafol) for apples.     

Gas chromatographic determination of pentachlorophenol in gelatin: collaborative study

Eleven collaborators participated in this study of a gas chromatographic method for the determination of pentachlorophenol (PCP) in gelatin. Following acid hydrolysis of a 2 g sample, PCP is extracted with hexane and partitioned into KOH solution. After reacidification, PCP is again extracted with hexane for determination by electron capture gas chromatography on a 1% SP-1240DA column. Three duplicate practice samples (0.0, 0.5, and 1.5 ppm) and 5 blind duplicate collaborative samples (0.0, 0.02, 0.1, 0.5, and 2.0 ppm) were analyzed by each collaborator. Mean recoveries of PCP in the collaborative samples ranged from 88% at the 0.02 ppm fortification level to 102% at the 0.1 ppm level; the overall mean recovery was 96%. Interlaboratory coefficients of variation ranged from 16.4% for the 0.1 ppm fortification level to 22.9% for the 0.5 ppm level; the overall interlaboratory coefficient of variation was 19.5%. The method has been adopted official first action.     

Multiresidue method for determining substituted urea herbicides in foods by liquid chromatography

A method is described for determining substituted urea herbicides in foods. The residues are extracted from the product with methanol, and the food coextractives are removed by using solvent partitioning and Florisil column chromatography. The extract is analyzed using liquid chromatography with postcolumn photodegradation, chemical derivatization with orthophthalaldehyde, and spectrofluorometry. Recoveries were determined by spiking 8 different food products with 6 phenylureas--chlorbromuron, chloroxuron, diuron, fluometuron, linuron, and metobromuron--at 0.05 and 0.5 ppm. Three determinations were made at each level for each product. Average recovery at 0.05 ppm was 95% (with a standard deviation of 7.9%), and at 0.5 ppm, 98% (with a standard deviation of 6.9%).     

High pressure liquid chromatographic determination of the rodenticide brodifacoum in rat tissue

An HPLC method was developed to determine residues of individual isomers of brodifacoum (3-[3-4'-bromo[1,1'-biphenyl]-4-yl)-1, 2, 3, 4-tetrahydro-1-naphthalenyl]-4-hydroxy-2H-1-benzopyran-2-one) in rat tissue. The compound was extracted twice with 10% methanol in chloroform, filtered, and cleaned up by using automated gel permeation chromatography. A final cleanup on a silica gel SEP-PAK was added to protect the analytical column from irreversible adsorption and to reduce analysis time. The analysis was done on a microPorasil column; a UV detector was used for quantitation. Recoveries of brodifacoum added to rat tissue in concentrations of 0.12-5.0 ppm were greater than 90%.     

Determination of organochlorine and organophosphorus pesticide residues in eggs using a solid phase extraction cleanup

A multiresidue solid phase extraction (SPE) method for the isolation and subsequent gas chromatographic determination of nonpolar organochlorine and polar organophosphorus pesticide residues in eggs is described. The method uses an acetonitrile extraction followed by an SPE cleanup using graphitized carbon black and aminopropyl SPE columns. Organophosphorus pesticides are determined by gas chromatography with flame photometric detection. After further cleanup of the extract using Florisil SPE columns, organochlorine pesticides are determined by gas chromatography with electron capture detection. Studies were performed using eggs containing both fortified and incurred pesticide residues. The average recoveries were 86-108% for 8 fortified organochlorine pesticide residues and 61-149% for 28 fortified organophosphorus pesticide residues.