Escape of hydrogen from venus

Recombination of O(2)(+) represents a source of fast oxygen atoms in Venus' exosphere, and subsequent collisions of oxygen atoms with hydrogen atoms lead to escape of about 10(7) hydrogen atoms per square centimeter per second. Escape of deuterium atoms is negligible, and the ratio of deuterium to hydrogen should increase with time. It is suggested that the mass-2 ion observed by Pioneer Venus is D(+), which implies a ratio of deuterium to hydrogen in the contemporary atmosphere of about 10(-2), an initial ratio of 5 x 10(-5) and an original H(2)O abundance not less than 800 grams per square centimeter.     

Benzene forms hydrogen bonds with water

Fully rotationally resolved spectra of three isotopic species of 1:1 clusters of benzene with water (H(2)O, D(2)O, and HDO) were fit to yield moments of inertia that demonstrate unambiguously that water is positioned above the benzene plane in nearly free internal rotation with both hydrogen atoms pointing toward the pi cloud. Ab initio calculations (MP2 level of electron correlation and 6-31 G(**) basis set with basis set superposition error corrections) predict a binding energy D(e) greater, similar 1.78 kilocalories per mole. In both the experimental and theoretical structures, water is situated nearly 1 angstrom within the van der Waals contacts of the monomers, a clear manifestation of hydrogen bond formation in this simple model of aqueous-pi electron interactions.     

Hydrogen in stishovite, with implications for mantle water content

Stishovite, the highest pressure polymorph of silicon dioxide, may be an important mineral in some regions of the Earth's mantle. Fourier transform infrared spectroscopy has been used to determine the hydrogen content of synthetic stishovite. The concentration of hydrogen depends on the aluminum content of the sample and reaches a maximum of 549 +/- 23 hydrogen atoms per 10(6) silicon atoms for an Al(2)O(3) content of 1.51 percent by weight. Stishovite could be a storage site for water in deep subducting slabs and in regions of the mantle that are too hot for hydrous minerals to be stable.     

Atomic resolution imaging of adsorbates on metal surfaces in air: iodine adsorption on pt(111)

The adsorption of iodine on platinum single crystals was studied with the scanning tunneling microscope (STM) to define the limits of resolution that can be obtained while imaging in air and to set a target resolution for STM imaging of metal surfaces immersed in an electrochemical cell. Two iodine adlattice unit cells of slightly different iodine packing density were clearly imaged: ( radical7 x radical7) R19.1 degrees -I, surface coverage ?(I) = 3/7; and (3 x 3)-I, ?(I) = 4/9. The three iodine atoms in the ( radical7 x radical7) unit cell form a regular hexagonal lattice interatomic distance d(I) = 0.424 nanometer, with two atoms adsorbed in threefold hollow sites and one atom adsorbed at an atop site. The (3 x 3) unit cell showed two different packing arrangements of the four iodine atoms exit. In one of the (3 x 3) structures, the iodine atoms pack to form a hexagonal lattice, d(I) = 0.417 nanometer, with three of the iodine atoms at twofold adsorption sites and one atom at an atop site. Another packing arrangement of iodine into the (3 x 3) unit cell was imaged in which the iodine atoms are not arranged symmetrically.     

Spectroscopic determination of the OH- solvation shell in the OH-.(H2O)n clusters

There has been long-standing uncertainty about the number of water molecules in the primary coordination environment of the OH- and F- ions in aqueous chemistry. We report the vibrational spectra of the OH-.(H2O)n and F-.(H2O)n clusters and interpret the pattern of OH stretching fundamentals with ab initio calculations. The spectra of the cold complexes are obtained by first attaching weakly bound argon atoms to the clusters and then monitoring the photoinduced evaporation of these atoms when an infrared laser is tuned to a vibrational resonance. The small clusters (n 相似文献   

Visualization of Surfactants on Nanostructured Palladium Clusters by a Combination of STM and High-Resolution TEM

Scanning tunneling microscopy (STM) and high-resolution transmission electron microscopy (TEM) have been used to determine the dimensions of a series of palladium clusters stabilized by tetraalkylammonium salts. Electrochemically prepared colloids were used in which the average diameter of the inner metal core was varied between 2 and 4 nanometers, and the size of the ammonium ions was adjusted in the series (+)N(n-C(4)H(9))(4) < (+)N(n-C(8)H(17))(4) < (+)N(n-C(18)H(37))(4). The difference between the mean diameter determined by STM and that measured by TEM allows the determination of the thickness of the protective surfactant layer. On the basis of these studies, a model of the geometric properties of ammonium-stabilized palladium clusters has been proposed. Suggestions for the mechanism of the STM imaging process are also made.     

Manipulation of the Reconstruction of the Au(111) Surface with the STM

Modification of the reconstruction of an Au(111) surface with a scanning tunneling microscope (STM) is demonstrated. This modification is accomplished by transferring a number of surface atoms to the STM tip to generate a surface multivacancy (hole), which modifies the stress distribution at the surface. The structural changes that follow the tip-induced surface perturbation are imaged in a time-resolved manner. The structural modification is the result of both short-range interactions, which lead to local atomic relaxation, and long-range elastic interactions, which produce large-scale rearrangements.     

H2S as a physiologic vasorelaxant: hypertension in mice with deletion of cystathionine gamma-lyase

Studies of nitric oxide over the past two decades have highlighted the fundamental importance of gaseous signaling molecules in biology and medicine. The physiological role of other gases such as carbon monoxide and hydrogen sulfide (H2S) is now receiving increasing attention. Here we show that H2S is physiologically generated by cystathionine gamma-lyase (CSE) and that genetic deletion of this enzyme in mice markedly reduces H2S levels in the serum, heart, aorta, and other tissues. Mutant mice lacking CSE display pronounced hypertension and diminished endothelium-dependent vasorelaxation. CSE is physiologically activated by calcium-calmodulin, which is a mechanism for H2S formation in response to vascular activation. These findings provide direct evidence that H2S is a physiologic vasodilator and regulator of blood pressure.     

Manipulating Chlorine Atom Bonding on the Si(100)-(2 x 1) Surface with the STM

Chlorine atoms strongly chemisorbed at dangling bond sites on the Si(100)-(2 x 1) surface are observed by scanning tunneling microscopy (STM) to hop between adjacent sites. The origin of this behavior is suggested to be an interaction between the field of the probe tip and the dipole moment of the silicon-chlorine bond. Chlorine atom migration is shown to be facilitated by the presence of a metastable chlorine bridge-bonded minimum. The STM probe was used to excite single chlorine atoms into this bridging configuration, resulting in a local population inversion. Selective application of voltage pulses between the probe tip and the surface rearranged the local bonding and induced transformations between different types of chlorine sites. In this manner, adsorbed species can be dissected and their composition and structure directly probed.     

Small-diameter silicon nanowire surfaces

Small-diameter (1 to 7 nanometers) silicon nanowires (SiNWs) were prepared, and their surfaces were removed of oxide and terminated with hydrogen by a hydrofluoric acid dip. Scanning tunneling microscopy (STM) of these SiNWs, performed both in air and in ultrahigh vacuum, revealed atomically resolved images that can be interpreted as hydrogen-terminated Si (111)-(1 x 1) and Si (001)-(1 x 1) surfaces corresponding to SiH3 on Si (111) and SiH2 on Si (001), respectively. These hydrogen-terminated SiNW surfaces seem to be more oxidation-resistant than regular silicon wafer surfaces, because atomically resolved STM images of SiNWs were obtained in air after several days' exposure to the ambient environment. Scanning tunneling spectroscopy measurements were performed on the oxide-removed SiNWs and were used to evaluate the electronic energy gaps. The energy gaps were found to increase with decreasing SiNW diameter from 1.1 electron volts for 7 nanometers to 3.5 electron volts for 1.3 nanometers, in agreement with previous theoretical predictions.     

H2S: a universal defense against antibiotics in bacteria

Many prokaryotic species generate hydrogen sulfide (H(2)S) in their natural environments. However, the biochemistry and physiological role of this gas in nonsulfur bacteria remain largely unknown. Here we demonstrate that inactivation of putative cystathionine β-synthase, cystathionine γ-lyase, or 3-mercaptopyruvate sulfurtransferase in Bacillus anthracis, Pseudomonas aeruginosa, Staphylococcus aureus, and Escherichia coli suppresses H(2)S production, rendering these pathogens highly sensitive to a multitude of antibiotics. Exogenous H(2)S suppresses this effect. Moreover, in bacteria that normally produce H(2)S and nitric oxide, these two gases act synergistically to sustain growth. The mechanism of gas-mediated antibiotic resistance relies on mitigation of oxidative stress imposed by antibiotics.     

An atomic seesaw switch formed by tilted asymmetric Sn-Ge dimers on a Ge (001) surface

When tin (Sn) atoms are deposited on a clean germanium (Ge) (001) surface at room temperature, buckled dimers originating from the Sn atoms are formed at the Ge-dimer position. We identified the dimer as a heterogeneous Sn-Ge dimer by reversing its buckling orientation with a scanning tunneling microscope (STM) at 80 kelvin. An atomic seesaw switch was formed for one-dimensional electronic conduction in the Ge dimer-row direction by using the STM to reversibly flip the buckling orientation of the Sn-Ge dimer and to set up standing-wave states.     

Continuous Elemental Analysis of Organic Compounds in Gas-Chromatographic Effluents

The compounds emerging from the gas-chromatographic column are quantitatively converted to a mixture of CO(2) and H(2). These gases are separated by means of an auxiliary column. The ratio of C and H atoms of each substance is deduced from the areas of carbon dioxide and hydrogen peaks.     

Molecular structure of DNA by scanning tunneling microscopy

Uncoated DNA molecules marked with an activated tris(l-aziridinyl) phosphine oxide (TAPO) solution were deposited on gold substrates and imaged in air with the use of a high-resolution scanning tunneling microscope (STM). Constant-current and gap-modulated STM images show clear evidence of the helicity of the DNA structure: pitch periodicity ranges from 25 to 35 angstroms, whereas the average diameter is 20 angstroms. Molecular structure within a single helix turn was also observed.     

In situ scanning tunneling microscopy of corrosion of silver-gold alloys

An in situ scanning tunneling microscope (STM) was used to observe the morphological changes accompanying the selective dissolution of Ag from low-Ag content Ag-Au alloys in dilute perchloric acid. This study was undertaken to explore the role of surface diffusion in alloy corrosion processes. These results are interpreted within the framework of the kink-ledge-terrace model of a crystal surface and a recent model of alloy corrosion based on a variant of percolation theory. The corrosion process leads to roughening of the surface by dissolution of Ag atoms from terrace sites. Annealing or smoothening of the surface occurs by vacancy migration through clusters and the subsequent annihilation of clusters at terrace ledges.     

Tracing food webs with stable hydrogen isotopes

The hydrogen isotopic content of an animal's food, not water, determines that animal's hydrogen isotopic content. Liver and muscle tissue from mice reared on a diet such that the ratio of deuterium to hydrogen (DIH) of their food and water was kept constant, have the same average D/H ratio as the food source. In a simple, natural population of snails and their possible algal diets, Littorina obtusata (northern Atlantic intertidal snails that feed almost exclusively on the brown alga Fucus vesiculosus) has the same D/H ratio as Fucus vesiculosis and not that of the other algae available to the snails.     

Tritium enrichment by gas-solid chromatography: technic for low-level analysis

A palladium chromatograph was developed that can detect less than 10 atoms of tritium per 10(18) atoms of hydrogen. Columns operated at ambient temperature have 70-liter hydrogen capacity (50-milliliter water sample) and give 60 percent recovery in the first 500 cubic centimeters of gas evolved.     

The Chemistry of Bulk Hydrogen: Reaction of Hydrogen Embedded in Nickel with Adsorbed CH3

Studies in heterogeneous catalysis have long speculated on or have provided indirect evidence for the role of hydrogen embedded in the catalyst bulk as a primary reactant. This report describes experiments carried out under single-collision conditions that document the distinctive reactivity of hydrogen embedded in the bulk of the metal catalyst. Specifically, the bulk H atom is shown to be the reactive species in the hydrogenation of CH(3) adsorbed on Ni(111) to form CH(4), while the H atoms bound to the surface were unreactive. These results unambiguously demonstrate the importance of bulk species to heterogeneous catalytic chemistry.     

Dimer preparation that mimics the transition state for the adsorption of H2 on the Si(100)-2 x 1 surface

A chemically induced dimer configuration was prepared on the silicon (Si) (100) surface and was characterized by scanning tunneling microscopy (STM) and spectroscopy (STS). These prepared dimers, which are essentially untilted and differ both electronically and structurally from the dynamically tilting dimers normally found on this surface, are more reactive than normal dimers. For molecular hydrogen (H2) adsorption, the enhancement is about 10(9) at room temperature. There is no appreciable barrier for the H2 reaction at prepared sites, indicating the prepared configuration closely approximates the actual dimer structure in the transition state. This previously unknown ability to prepare specific surface configurations has important implications for understanding and controlling reaction dynamics on semiconductor surfaces.     

Infrared Reflection-Absorption Spectroscopy and STM Studies of Model Silica-Supported Copper Catalysts

The structure of model silica-supported copper catalysts has been investigated with scanning tunneling microscopy (STM) and infrared reflection-absorption spectroscopy (IRAS). The IRAS studies of CO on the model silica-supported copper catalysts indicate that there are several types of copper clusters with surface structures similar to (111), (110), and other high-index planes of single-crystal copper. The STM studies show several types of copper clusters on silica and reveal images of metal clusters on an amorphous oxide support with atomic resolution.