Nondestructive sampling of Eucalyptus globulus and E. nitens for wood properties. III. Predicted pulp yield using Near Infrared Reflectance Analysis

  Within-tree variation in kraft pulp yield, predicted using near infrared reflectance analysis, was studied in thirty trees of E. globulus and fifty trees of E. nitens to develop a non-destructive sampling strategy. Trees, aged 5 to 9 years, were sampled across a range of sites in southern Australia. Simulated core samples were removed at six fixed heights easily accessible from the ground (0.5, 0.7, ... 1.5 m) and at seven percentage heights (0, 20, 30, ... 70%). Whole-tree values, calculated from percentage height data, were correlated with the core data to determine the optimal sampling height. Core samples were found to be good predictors of whole-tree pulp yield for E. globulus, with simulated cores taken from the recommended sampling height (1.1 m) explaining more than 50% of variation in whole-tree pulp yield. Results for E. nitens were variable with large site differences apparent. On high quality sites, core samples from the recommended sampling height (0.9 m) were good predictors of whole-tree pulp yield, explaining around 60% of the variation. On poor quality sites, cores were poor predictors of whole-tree pulp yield. Radial orientation of cores was not important and predicted pulp yield was not related to tree size, basic density or fibre length. To estimate stand mean pulp yield to an accuracy of ±1% would require sampling 6 trees of E. globulus and 4 trees for E. nitens using either multiple discs or core samples. A single sampling height (1.1 m) is recommended for sampling for basic density, fibre length, fibre coarseness and predicted pulp yield in E. globulus. For E. nitens the recommended sampling height for basic density and fibre length is 0.7 m and 0.9 m is recommended for predicted pulp yield on good quality sites. Received 17 September 1998     

Nondestructive sampling of Eucalyptus globulus and E. nitens for wood properties. I. Basic density

A non-destructive sampling strategy for basic density, based on removing 12 mm bark-to-bark cores, was developed in E. globulus and E. nitens. Fifty trees of each species, aged 5 to 9 years, were sampled across a range of sites. Core samples were removed on both a north-south and an east-west axis from 6 fixed heights in the base of the tree (0.5 m, 0.7 m, …, 1.5 m). Whole-tree values were calculated from disc samples removed at eight percentage heights (0, 10, 20, …, 70%) and correlations between the cores and whole-tree values were used to determine the optimal sampling height. Core samples were found to be reliable predictors of whole-tree density, explaining between 84% and 89% of the variation between trees. Core sampling of E. globulus and E. nitens to estimate basic density of whole-trees and stands is feasible; cores from trees at all E. globulus sites gave high correlations with whole-tree values. For E. nitens, site differences were apparent, and it is recommended that a small destructive sampling program should be undertaken prior to commencing a major sampling program. Recommended optimal sampling heights are 1.1 m for E. globulus and 0.7 m for E. nitens. Core orientation was not important and density was not related to tree size. Six whole-tree samples or eight core samples are required for estimating the mean density of a stand at a specific site to an accuracy of ±20 kg m⁻³ with a 95% confidence interval. Received 17 September 1998     

How dense is my blue gum? prediction of whole-tree basic density of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis>

Accurate prediction of whole-tree wood basic density (BD) from indirect density measures is important for estimating Eucalytpus globulus breeding values and genetic gain. We measured 100 E. globulus trees at 6.5 years of age on each of a high productivity site (Albany) and a low productivity site (Esperance), sampling 16 full-sib families and seven open-pollinated ‘check’ seedlots. On each tree we assessed pilodyn penetration at 1.3 m and BD of: (a) the outer 10 mm which was penetrated by the pilodyn pin of a bark-bark core, (b) a whole bark-bark core at 1.3 m, (c) a cross-sectional disk at 1.3 m and (d) the whole tree, represented by cross-sectional disks at five heights. Site effects and genetic values for families and checks were determined by mixed model analysis. A trend of increasing BD from pith to bark was more pronounced at Albany, where wood formed before age 3.5 years was 12 kg/m³ less dense than at Esperance (P = 0.01) and wood formed from 3.5 to 6.5 years was 27 kg/m³ denser than at Esperance (P < 0.001). Mean whole-tree BD was 19 kg/m³ greater at Albany (P < 0.001). Pilodyn penetration was well-correlated with BD of the 10 mm sample of penetrated wood and this relationship was not greatly affected by site variation. Genetic values for pilodyn penetration formed precise relationships with BD of breast-height discs and whole-tree BD although they were site-specific. Pilodyn penetration was a better predictor for genetic values of whole-tree BD than were bark-bark cores.     

Examination of within-tree variations and the heights representing whole-tree values of derived wood properties for quasi-non-destructive breeding of Eucalyptus camaldulensis and Eucalyptus globulus as quality pulpwood

Within-tree variations of derived wood properties of Runkel ratio, Luces shape factor, slenderness ratio, and solids factor were examined for Eucalyptus camaldulensis and Eucalyptus globulus trees and the tendency difference in the within-tree variations between individuals and between species, in both radial and axial directions by statistical data analysis. These properties are important for quality breeding of pulpwood. In both species, within-tree variations were generally observed as higher values in the upper and outer parts compared with other parts of the trunk for Runkel ratio and Luces shape factor. In E. camaldulensis, within-tree variations were observed as higher values in the upper and outer parts compared with other parts of the trunk for slenderness ratio and solids factor. In E. globulus, within-tree variations were observed as higher values in the outer parts compared with other parts for slenderness ratio and solids factor. However, significant difference of tendency was observed in radial variation between individuals of E. globulus for Runkel ratio and in both radial and axial variations between species for solids factor. Furthermore, within-tree variations of derived wood properties were analyzed to determine a sampling height in the trunk which can be used to represent whole-tree values. Representative heights of derived wood properties from two trees were found to be 2.8m in E. camaldulensis (except for Runkel ratio and Luces shape factor) and 1.8m in E. globules (except for Runkel ratio), regardless of differences in tree height (growth rate) and in tendency of within-tree variation of derived wood properties.     

Impact of Botryosphaeria,Diplodia and Neofusicoccum species on two Eucalyptus species and a hybrid: From pathogenicity to physiological performance

Species of Botryosphaeriaceae are associated with canker and dieback of Eucalyptus spp. worldwide, but little is known about their effect on the host physiology. The aim of this study was to evaluate the impact of Botryosphaeriaceae isolates from nine species in three genera (Botryosphaeria, Diplodia and Neofusicoccum), previously isolated from eucalypts, on three different Eucalyptus hosts (seedlings of E. nitens, cuttings of E. globulusand of E. globulus× E. cypellocarpa). An approach combining standard pathogenicity trials with evaluation of plant morpho‐physiological parameters was used. The size of the lesions produced revealed differences in fungal aggressiveness and host susceptibility. Isolates of Neofusicoccum kwambonambienseand Diplodia corticolawere the most aggressive, while Botryosphaeria dothidea and Diplodia seriataisolates were the least aggressive. In general, hybrid E. globulus× E. cypellocarpa plants developed smaller lesions, followed by E. nitens and E. globulus. Eucalyptus nitensplants showed minimal modifications on the morpho‐physiological profile when infected, although more severe symptoms and mortality were observed. This is probably due to a more variable genetic background of the plants. However, in general, no direct association between putative fungal aggressiveness and plant physiological disorders could be found. Results suggested that under optimal growth conditions plants manage to cope with pathogen attack and maintain their physiological performance.     

Mycosphaerella species occurring on Eucalyptus globulus and Eucalyptus nitens plantations of Tasmania,Australia

The genus Mycosphaerella Johanson contains many pathogens capable of causing a severe impact on the growth of susceptible eucalypt species. The lack of knowledge about which species are present in Tasmania and their potential risk to the plantation industry prompted this study into the Mycosphaerella species occurring on Eucalyptus globulus and Eucalyptus nitens plantations in Tasmania. A total of 36 plantation and five road verge sites of E. globulus and E. nitens were sampled. Five Mycosphaerella species and three species from associated anamorph genera were isolated and identified in Tasmania; Mycosphaerella nubilosa, Mycosphaerella cryptica, Mycosphaerella tasmaniensis, Mycosphaerella grandis, Mycosphaerella vespa, Coniothyrium ovatum, Sonderhenia eucalypticola and Sonderhenia eucalyptorum. The most frequently isolated species with the highest incidence and severity of infection were M. cryptica and M. nubilosa. These two species appear to have the greatest potential to damage juvenile eucalypt plantations in Tasmania. A link between Mycosphaerella vespa and Coniothyrium ovatum is described for the first time.     

Combining empirical models and the process-based model 3-PG to predict Eucalyptus nitens plantations growth in Spain

Empirical, statistically based models were used to describe the growth and development of Eucalyptus nitens plantations for a range of site productivities and the standard biomass and pulp silvicultural regime currently applied in Northern Spain. The results obtained, along with data gathered from a network of 68 plots, 48 trees felled for biomass estimations and 73 trees sampled for foliar area estimation were used to parameterize the 3-PG model for this species in Northern Spain. Most parameters associated with allometric relationships and partitioning (i.e. bark and branch fraction, basic density, age modifier and mortality) were derived from local data, and the remaining parameters were obtained from published studies on E. nitens or default values previously used for E. globulus. The parameterized model was validated with data from three trials measured from age 3 years until age 8-14 years, and performed better than the empirical model in terms of total stand under bark volume, mean diameter at breast height, basal area and foliar biomass. The process-based model was then used to forecast changes in plantations subjected to a clearwood regime, initializing the model at age 3 years, considering 3 prunings, 2 thinnings and lengthening the rotation to 18 years. This integrated regime was able to provide biomass for bioenergy, pulp or fibreboard wood and also solid wood, with thinning operations assisting the financial viability, and was a potentially good alternative for productive sites.     

试论世界桉树栽培现状和我国桉树人工林发展策略

桉树是世界上热带、亚热带地区最重要的人工林树种之一,其面积已超过600万ha。文中着重介绍了巴西发展按树的经验,并提出了我国应采取的对策。     

Methods for the determination of wood properties,Kraft pulp yield and wood fibre dimensions on small wood samples.

A trial set-up with methods for sampling, treatment and analysis of small wood chips are presented in this paper, to determine important wood and fibre properties, like basic density, dry density, volume swelling of wood, Kraft pulp yield, fibre length, fibre coarseness, fibre width, lumen width and fibre wall thickness. The required time for one sample is about 1.5 man-hour, but this requires relatively larger series and trained personnel. Acceptable measurement accuracy is achieved when the volume of the wood sample is at least 1.5 ml, except that of wood volume swelling. To gain acceptable measurement accuracy for volume swelling, the wood volume should be increased to at least 3 ml, and preferably more than 5–6 ml per sample. The level of pulp yield and wood density do not show a significant effect on the measurement accuracy for fibre cross-section dimensions. Fibre coarseness, on the other hand, has a significant influence on these accuracies. A double measurement of fibre coarseness will improve the accuracy to an acceptable level. The method presented here may, together with information about trees and growth locations, form the basis for greater insight into the mechanisms involved in development of wood and fibre properties in trees, which in turn may provide better control and utilisation of wood for pulp and paper production.Abbreviations CWD cell wall density in dry wood=1500 kg/m³ - Ww dry weight of wood (kg) - Vmax green (wet) volume of wood (m³) - Vmin dry volume of wood (m³) - BD basic wood density (kg/m³) - DD dry wood density (kg/m³) - VS maximum volume swelling of wood (%) - Wp dry weight of pulp (kg) - PY pulp yield (%) - C fibre coarseness, the average weight of a unit length of fibre (g/m) - CL average chip length (mm) - CWT average cell wall thickness (m) - FW average fibre width (m) - l average native fibre length in solid wood - L chip length - lc average fibre length in wood chip (mm) - Lc length-weighted fibre length in wood chip (mm) - lw native average fibre length in wood (mm) - Lw native length-weighted fibre length in wood (mm) - LW average lumen width (m) - llw average native fibre length, length weighted, in wood - X average fibre length in chip - Xlw average fibre length, length weighted, in chip     

Insect (Salebria sp.) infestation and impact on Vitellaria paradoxa C.F. Gaertn. fruit production in agroforestry parklands

Vitellaria paradoxa, known as Shea tree or karité, is one of the dominant trees of agroforestry parklands in Sahelian region with an immense commercial value. In this study, we examined infestation of fruit-bearing shoots and fruits on two sites in western Burkina Faso across different reproductive phenophases, crown heights and aspects. The number of infested and healthy shoots and fruits were counted on 60 reproductively active trees randomly selected from on-year shea trees in each site, using a metal frame (0.5 × 0.5 m) to mark a fixed area of the canopy for sampling. The shoot and fruit borer was identified as Salebria sp. (Lepidoptera:Pyralidae), which was not reported earlier. The proportion of infested trees and shoots varied significantly between sites and among reproductive phenophases (P < 0.0001). The site close to the natural forest had the highest infestation rate than distantly located site. Among reproductive phenophases, the proportions of infested trees and shoots were the highest during flowering and fruit set, respectively. Fruit infestation also varied significantly between sites, crown heights and aspects (P < 0.001). The site close to the natural forest and the crown with north-east aspect were heavily infested while the bottom part of the crown had the lowest infestation. As a whole, 49–80% of trees, 24–31% of shoots and 4–15% of fruits were found infested, depending on the site. These infestation levels combined with precocious flower and fruit abscissions would pose serious economic losses that justify a call for immediate pest control initiatives.     

Positioning precision and sampling number of DGPS under forest canopies

 Experimental results were studied to determine the relationships between positioning precision of a differential global positioning system (DGPS) and forest type, antenna height, and season, and to clarify the relationship between sampling number and the convergence of positioning precision. Observation was carried out for 24 h. Mean circular area probability (CEP₉₅) was 2.80 m for deciduous broadleaved trees, and 4.99 m for conifers. The mean CEP₉₅ taken at 7 m height (3.14 m) was higher than that at 1 m height (3.92 m) at all sites. The mean CEP₉₅ taken during the defoliation season (2.65 m) was slightly better than during the foliation season (2.96 m). There were significant differences between forest types (P < 0.001) and antenna heights (P < 0.05). Positioning precision was not noticeably improved if the sampling number was around ten or less. A sampling number of 100–1000 or more is required before substantial improvements can be expected. As long as high positioning precision is not required, it is acceptable to use 2D & 3D modes and relatively few samples to take measurements. Received: April 24, 2002 / Accepted: October 10, 2002 Correspondence to:I. Sawaguchi     

Chloride content and biomass partitioning in Eucalyptus hybrids grown on saline sites

Eucalyptus camaldulensis × globulus and E. camaldulensis × grandis hybrids have been developed to combine the salt–waterlogging tolerance and high-quality wood fibre of their respective parents. The aim is to develop trees that will grow in relatively dry and/or saline environments and provide commercial wood products. Previous studies indicate that the hybrids exhibit faster growth than either of their pure species parents, and that there are significant differences in growth rates between them. We undertook a comparative study of the partitioning of above-ground biomass (AGB) to examine biomass and chloride (Cl) allocation of trees growing on two saline-irrigated sites in south-eastern Australia. Eucalyptus camaldulensis × globulus had a higher proportion of AGB in leaves (20–29% cf. 15–16%), and lower proportion in live branches (3–10% cf. 6–14%) than E. camaldulensis × grandis. The concentration of Cl was highest in the stembark (4.2–9.6 g kg⁻¹) and lowest in the stemwood (0.6–2.0 g kg⁻¹), suggesting that trees can export Cl through bark shedding. Total Cl content was strongly related to volume under bark (R² = 0.99), and differences in partitioning of Cl into tree components differed between the hybrids in the same way as AGB. Preferential partitioning of Cl to live branches rather than foliage in E. camaldulensis × grandis suggests that this hybrid may be compartmentalising Cl to reduce the risk of Cl toxicity in the leaves.     

Root biomass and distribution of a <Emphasis Type="Italic">Picea–Abies</Emphasis> stand and a <Emphasis Type="Italic">Larix–Betula</Emphasis> stand in pumiceous Entisols in Japan

Root biomass and root distribution were studied in Entisols derived from the thick deposition of volcanic pumice on Hokkaido Island, Japan, to examine the effect of soil conditions on tree root development. The soil had a thin (<10 cm) A horizon and thick coarse pumiceous gravel layers with low levels of available nutrients and water. Two stands were studied: a Picea glehnii–Abies sachalinensis stand (PA stand) and a Larix kaempferi–Betula platyphylla var. japonica stand (LB stand). The allometric relationships between diameter at breast height (DBH) and aboveground and belowground biomass of these species were obtained to estimate stand biomass. The belowground biomass was small: 30.6 Mg ha₋₁ for the PA stand and 24.3 Mg ha₋₁ for the LB stand. The trunk/root ratios of study stands were 4.8 for the PA stand and 4.3 for the LB stand, which were higher than those from previous studies in boreal and temperate forests. All species developed shallow root systems, and fine roots were spread densely in the shallow A horizon, suggesting that physical obstruction by the pumiceous layers and their low levels of available water and nutrients restricted downward root elongation. The high trunk/root ratios of the trees may also have resulted from the limited available rooting space in the study sites.     

Root distribution of Eucalyptus grandis and Corymbia maculata in degraded saline soils of south-eastern Australia

Planting trees, in farm forestry enterprises, to control rising watertables is an increasing practice for both economic and environmental benefits. One central biophysical issue which determines the effectiveness of trees to control groundwater is the ability of trees to grow roots through degraded soils and take up groundwater. We investigated the effect of soil properties, especially the presence of shallow watertables and site preparation practice, on the vertical and horizontal distributions of Eucalyptus grandis W. Hill ex Maiden and Corymbia maculata (Hook.) K.D. Hill and L.A.S. Johnson roots. In order to improve the reliability of root data, we measured root growth and distribution by three different methods – (i) number of roots intercepting the vertical plane of the soil profile, (ii) root length density in soil cores taken at different depths but in the horizontal plane of the profile, and (iii) root length density in soil cores in the vertical plane at different radial positions from trees and compared the results. Two experimental sites were established in flood-irrigated, farm forestry plantations on contrasting soils in the Murray Riverina region of south-eastern Australia. At one site (Norwood Park), we studied a 58-month-old stand of E. grandis growing in clay loam overlaying medium clay, saline, sodic and alkaline subsoil with a saline (11.5 dS m⁻¹) watertable at 2.8 m depth. Here, there were few roots growing above the watertable. The Karawatha site had adjacent stands of 46-month old E. grandis and C. maculata growing in a sandy, neutral and non-saline soil with a shallow (3.1 m deep) non-saline (2.8 dS m⁻¹) watertable. Here roots proliferated above the watertable in both species but to a much greater extent under C. maculata than under E. grandis. Root distributions in the surface soil were similar at all sites but differences in root growth in the capillary zones paralleled differences in groundwater uptake by trees. We conclude (i) that appropriate matching of species with site characteristics, especially soil and groundwater properties, will enhance tree growth and groundwater uptake and (ii) that extensive planting of C. maculata over non-saline watertables maximises the chances of achieving the multiple objectives of regional groundwater control, fast growth rates and reduced irrigation demand.     

Representative heights for assessing whole-tree values of cell-type proportions in Eucalyptus camaldulensis and E. globulus

Eucalyptus camaldulensis Dehnh. and E. globulus Labill. are economically important species for wood and pulpwood materials. Representative heights for assessing whole-tree values of cell-type proportions(vessels, fibers, ray and axial parenchyma percentages) using increment cores were examined by analysis of within-tree variations. Pattern differences were evaluated between trees and species in both radial and axial directions by statistical data analysis(Moses test). In E. camaldulensis,within-tree variation of vessel percentage was generally higher in the upper and outer regions of the trunk. In contrast, E. globulus within-tree variation was unclear. In both species, although no clear pattern of fiber percentages was observed, within-tree variations of ray and axial parenchyma levels were higher in the lower and inner regions.Significant differences in patterns were observed in the axial variation between species for vessel percentages and in the radial variation between trees of E. camaldulensis for ray parenchyma percentages. The representative heights for assessing whole-tree cell-type proportions were 0.8 mabove the ground for E. camaldulensis and 2.8 m for E.globulus, regardless of differences in tree height and pattern of within-tree variation of cell-type proportions.     

Endothia gyrosa associated with severe stem cankers on plantation grown Eucalyptus nitens in Tasmania,Australia

Severe stem cankers in Eucalyptus nitens, from a 14-year-old mixed provenance plantation, were associated with infection by Endothia gyrosa, present in its teleomorph state. Surveys of incidence among canker severity classes were carried out in a thinned and pruned stand and an adjacent unthinned and unpruned stand within the affected plantation. No differences in incidence among the canker severity classes were found between the thinned/pruned and unthinned/unpruned stands or between different crown dominance classes within the unthinned/unpruned stand. However, the incidence among canker severity classes was strongly associated with bark roughness with 97% of rough-barked trees developing either annual cankers or cankers causing cambial damage. Stem cankers were found on only 11% of trees with smooth bark. Bark roughness in E. nitens was shown to differ significantly between provenances. Deployment of provenances prone to rough bark in routine plantation establishment may pose a risk of damaging stem canker outbreaks.     

Gene flow between introduced and native Eucalyptus species

The first evidence of in situ F₁ hybridisation between an introduced eucalypt plantation species, Eucalyptus nitens, and a native eucalypt species is presented. Open-pollinated seed was collected from a mature E. nitens trial and from the adjacent native species, E. ovata and E. viminalis on the island of Tasmania. Nearly 70 000 seedlings were grown to a size at which hybrids could be clearly distinguished from pure species seedlings on the basis of morphology and a nearly species-specific isozyme allele. Hybridisation was observed between E. nitens and E. ovata, but no hybrids involving E. viminalis were found. This pattern of hybridisation was consistent with the flowering time overlap between the E. ovata and E. nitens. Eucalyptus nitens progenies displayed a low and relatively homogeneous level of hybridisation, averaging 0.15% per tree. In comparison, the proportion of hybrids obtained from the adjacent E. ovata trees varied from 0.04 to 16% per tree. Whether progeny arising from such hybridisation will survive and grow in nature to allow for backcrossing and introgression of the exotic genes into the native population is not yet known.     

Calibration and Uncertainty Analysis of a Carbon Accounting Model to Stem Wood Density and Partitioning of Biomass for Eucalyptus globulus and Pinus Radiata

There is a need to calibrate models for carbon accounting in forest systems if they are to be applied for carbon trading and off-set schemes. One such model, Full Carbon Accounting Model (FullCAM), calculates stem mass by taking annual inputs of tree growth in stem volume and multiplying these by basic stem wood density. Stem mass is then multiplied by user-entered coefficients to determine the mass of other tree components. Using datasets of Pinus radiata and Eucalyptus globulus that comprised of between 73 and 187 observations, we determined empirical relationships that can be used in FullCAM to relate basic stem wood density to stand age, and masses of bark, foliage or branches to mass of stem wood for these two species. All fitted relationships were highly significant (p < 0.001), explaining between 35 and 89% of the variance. These calibrations were then tested using three case studies where data on volume yield curves and repeated measures of biomass of stand components were available: one of P. radiata and two of E. globulus. Although accumulation of biomass in foliage and branches were not well predicted by the model, sensitivity analysis showed that this was relatively unimportant to total carbon storage because of the dominance of the stem, particularly once the stand is older than 5 years. Indeed, FullCAM accounted for 99% of the variance in measured above-ground biomass at all three sites because calibrations for the mass of stem was reasonably well constrained. Uncertainty analysis showed that despite the standard errors of parameters used in relationships for basic density and biomass partitioning, and for estimates of carbon contents of tree components, we can be 95% confident that sequestration of carbon in trees and debris of Pinus radiata and Eucalyptus globulus plantations are, on average, within 13% of that predicted by FullCAM. Ensis is a joint venture between CSIRO FFP P/L and Scion Australasia P/L     

Growth pattern analysis and stemwood production in an unmanaged old plantation of hiba, Thujopsis dolabrata, in northern Japan

We analyzed the growth patterns of Thujopsis dolabrata var. hondai trees in an old plantation (161 years old), where no silvicultural treatments (e.g., thinning) have been conducted since the initial planting. The analysis focused on understanding individual growth under a long-term self-thinning process, and the stand-level stemwood production at the mature stage was evaluated. Nine canopy-layer trees and one suppressed tree were used for the analysis of annual increments in stem diameters, heights, and stemwood volumes for a given past year using the ring-width data. Both the diameter (at basal portion) and height of all the canopy-layer trees increased at similar rates during the early stage (i.e., 60–70 years after planting); however, after this period, only the height growth rates declined sharply. The annual growth rates of stemwood volume also simultaneously leveled off at the stand age of 40–60 years. Subsequently, the patterns diverged conspicuously, e.g., the growth rates were maintained or increased in some individuals, while it gradually decreased in the case of others until the present year. The divergence of growth pattern was likely to be triggered by intertree competition at several decades after the onset of canopy closure. The current stemwood production of the sample trees, including the suppressed one, was positively correlated with certain size parameters such as stem diameter at breast height and sapwood area at a height of 4 m. Based on the diameter-base allometry, the total stand stemwood production was estimated to be about 12.8 m³ ha⁻¹ year⁻¹. This estimate was higher than those of some old natural T. dolabrata forests (2.0–8.6 m³ ha⁻¹ year⁻¹) that have been well managed by repetitive selection thinning. Furthermore, individual mean stemwood production of the study plantation (0.03 m³ tree⁻¹ year⁻¹) was within the range of these natural stands (0.01–0.05 m³ tree⁻¹ year⁻¹). These comparisons suggested that the old T. dolabrata plantation still maintained a relatively high stemwood production potential despite the absence of artificial controls of tree density in the past. In terms of timber production, this fact implied that a rather long rotation (>100 years) can be applicable in the management of T. dolabrata plantations.